Redispersible hybrid nanopowders: cerium oxide nanoparticle complexes with phosphonated-PEG oligomers

Cerium Oxide Catalyzed Disproportionation of Hydrogen Peroxide: A Closer Look at the Reaction Intermediate

Cerium oxide nanoparticles (CNPs) have recently gained increasing interest as redox enzyme-mimetics to scavenge the intracellular excess of reactive oxygen species, including hydrogen peroxide (H2 O2 ). Despite the extensive exploration, there remains a notable discrepancy regarding the interpretation of observed redshift of UV-Visible spectroscopy due to H2 O2 addition and the catalase-mimicking mechanism of CNPs. To address this question, we investigated the reaction mechanism by taking a closer look at the reaction intermediate during the catalase mimicking reaction. In this study, we present evidence demonstrating that in aqueous solutions, H2 O2 adsorption at CNP surface triggers the formation of stable intermediates known as cerium-peroxo (Ce-O2 2- ) and/or cerium-hydroperoxo (Ce-OOH- ) complexes as resolved by Raman scattering and UV-Visible spectroscopy. Polymer coating presents steric hinderance for H2 O2 accessibility to the solid-liquid interface limiting further intermediate formation. We demonstrate in depth that the catalytic reactivity of CNPs in the H2 O2 disproportionation reaction increases with the Ce(III)-fraction and decreases in the presence of polymer coatings. The developed approach using UV-Visible spectroscopy for the characterization of the surface peroxide species can potentially serve as a foundation for determining the catalytic reactivity of CNPs in the disproportionation of H2 O2 .

Structural and functional insights in polysaccharides coated cerium oxide nanoparticles and their potential biomedical applications: A review

Cerium oxide nanoparticles have now significant presence in biomedical fields due to their wide applications; however, challenges regarding their safety and biocompatibility persist. Polysaccharides based biopolymers have inherent hydroxyl and carboxyl groups, enabling them to govern the surface functionalization of cerium oxide nanoparticles, hence their chemical and physical characteristics. Because of this, polysaccharides such as dextran, alginate, pullulan, chitosan, polylactic acid, starch, and pectin are practical substitutes for the conventional coatings used to synthesize cerium oxide nanoparticles. This review discusses the effect of biopolymer coatings on the properties of cerium oxide nanoparticles, such as size, stability, aggregation, and biocompatibility. Additionally, it also summarises various biomedical applications of polysaccharides coated cerium oxide nanoparticles, such as in bone tissue regeneration, liver inflammation, wound healing, and antibacterial and anticancer activities. Biocompatible cerium oxide nanoparticles will surely improve their applications in the biomedical field.

Nanoceria Aggregate Formulation Promotes Buffer Stability, Cell Clustering, and Reduction of Adherent Biofilm in Streptococcus mutans

Streptococcus mutans is one of the key etiological factors in tooth-borne biofilm development that leads to dental caries in the presence of fermentable sugars. We previously reported on the ability of acid-stabilized nanoceria (CeO2-NP) produced by the hydrolysis of ceric salts to limit biofilm adherence of S. mutans via non-bactericidal mechanism(s). Herein, we report a chondroitin sulfate A (CSA) formulation (CeO2-NP-CSA) comprising nanoceria aggregates that promotes resistance to bulk precipitation under a range of conditions with retention of the biofilm-inhibiting activity, allowing for a more thorough mechanistic study of its bioactivity. The principal mechanism of reduced in vitro biofilm adherence of S. mutans by CeO2-NP-CSA is the production of nonadherent cell clusters. Additionally, dose-dependent in vitro human cell toxicity studies demonstrated no additional toxicity beyond that of equimolar doses of sodium fluoride, currently utilized in many oral health products. This study represents a unique approach and use of a nanoceria aggregate formulation with implications for promoting oral health and dental caries prevention as an adjunctive treatment.

Synthesis of Stable Cerium Oxide Nanoparticles Coated with Phosphonic Acid-Based Functional Polymers

Functional polymers, such as poly(ethylene glycol) (PEG), terminated with a single phosphonic acid, hereafter PEG_ik-Ph are often applied to coat metal oxide surfaces during post-synthesis steps but are not sufficient to stabilize sub-10 nm particles in protein-rich biofluids. The instability is attributed to the weak binding affinity of post-grafted phosphonic acid groups, resulting in a gradual detachment of the polymers from the surface. Here, we assess these polymers as coating agents using an alternative route, namely, the one-step wet-chemical synthesis, where PEG_ik-Ph is introduced with cerium precursors during the synthesis. Characterization of the coated cerium oxide nanoparticles (CNPs) indicates a core-shell structure, where the cores are 3 nm cerium oxide and the shell consists of functionalized PEG polymers in a brush configuration. Results show that CNPs coated with PEG_1k-Ph and PEG_2k-Ph are of potential interest for applications as nanomedicines due to their high Ce(III) content and increased colloidal stability in cell culture media. We further demonstrate that the CNPs in the presence of hydrogen peroxide show an additional absorbance band in the UV-vis spectrum, which is attributed to Ce-O₂^2- peroxo-complexes and could be used in the evaluation of their catalytic activity for scavenging reactive oxygen species.

Redispersion mechanisms of 2D nanosheets: combined role of intersheet contact and surface chemistry

Redispersion behavior recovers the important features of nanomaterials and thus holds great promise for exciting applications of nanomaterials in different fields. In contrast to the redispersion of nanoparticles, which is mainly determined by surface chemistry, the redispersion of 2D nanosheets could be more complicated and is not well understood. In the present study, the redispersion behavior of 2D NMs was investigated by selecting representative nanosheets, MoS₂, graphene oxide and their derivatives with both experimental methods and molecular dynamics (MD) simulations. The good agreement between experiments and MD simulations suggested that the redispersion in response to surface chemistry was regulated by the alignment configurations of the nanosheets. More importantly, we revealed that the difference in the hydrophilicity properties is responsible for the distinctive separation distances of the 1T and 2H MoS₂ nanosheets. Appropriately adjusting the alignment configuration of the nanosheets can alter the effect of surface hydrophilicity on the redispersion behavior. Based on these fundamental findings, we identified three distinctive zones for the redispersion tendency of the 2D nanosheets with different surface hydrophilicity, Hamaker constants and intersheet contacts. As one of the implications, the results serve as a prescreening for the stability of the 2D restacking-based membrane. For the first time, the study systematically reported the interplay of intersheet configuration and surface chemistry in the redispersion of nanosheets, which provides a theoretical foundation for the processing and applications of 2D nanomaterials.

In vitro and in vivo evaluation of cerium oxide nanoparticles in respiratory syncytial virus infection

Respiratory syncytial virus (RSV) is the most common cause of viral bronchiolitis among children worldwide, yet there is no vaccine for RSV disease. This study investigates the potential of cube and sphere-shaped cerium oxide nanoparticles (CNP) to modulate reactive oxygen (ROS) and nitrogen (RNS) species and immune cell phenotypes in the presence of RSV infection in vitro and in vivo. Cube and sphere-shaped CNP were synthesized by hydrothermal and ultrasonication methods, respectively. Physico-chemical characterization confirmed the shape of sphere and cube CNP and effect of various parameters on their particle size distribution and zeta potential. In vitro results revealed that sphere and cube CNP differentially modulated ROS and RNS levels in J774 macrophages. Specifically, cube CNP significantly reduced RSV-induced ROS levels without affecting RNS levels while sphere CNP increased RSV-induced RNS levels with minimal effect on ROS levels. Cube CNP drove an M1 phenotype in RSV-infected macrophages in vitro by increasing macrophage surface expression of CD80 and CD86 with a concomitant increase in TNFα and IL-12p70, while simultaneously decreasing M2 CD206 expression. Intranasal administration of sphere and cube-CNP were well-tolerated with no observed toxicity in BALB/c mice. Notably, cube CNP preferentially accumulated in murine alveolar macrophages and induced their activation, avoiding enhanced uptake and activation of other inflammatory cells such as neutrophils, which are associated with RSV-mediated inflammation. In conclusion, we report that sphere and cube CNP modulate macrophage polarization and innate cellular responses during RSV infection.

Versatile Coating Platform for Metal Oxide Nanoparticles: Applications to Materials and Biological Science

In this feature article, we provide an overview of our research on statistical copolymers as a coating material for metal oxide nanoparticles and surfaces. These copolymers contain functional groups enabling noncovalent binding to oxide surfaces and poly(ethylene glycol) (PEG) polymers for colloidal stability and stealthiness. The functional groups are organic derivatives of phosphorous acid compounds R-H₂PO₃, also known as phosphonic acids that have been screened for their strong affinity to metals and for their multidentate binding ability. Herein we develop a polymer-based coating platform that shares features with the self-assembled monolayer (SAM) and layer-by-layer (L-b-L) deposition techniques. The milestones of this endeavor are the synthesis of PEG-based copolymers containing multiple phosphonic acid groups, the implementation of simple protocols combining versatility with high particle production yields, and the experimental evidence of the colloidal stability of the coated particles. As a demonstration, coating studies are conducted on cerium (CeO₂), iron (γ-Fe₂O₃), aluminum (Al₂O₃), and titanium (TiO₂) oxides of different sizes and morphologies. We finally discuss applications in the domain of nanomaterials and nanomedicine. We evaluate the beneficial effects of coatings on redispersible nanopowders, contrast agents for in vitro/vivo assays, and stimuli-responsive particles.

The Antioxidant Effect of the Metal and Metal-Oxide Nanoparticles

Inorganic nanoparticles, such as CeO₃, TiO₂ and Fe₃O₄ could be served as a platform for their excellent performance in antioxidant effect. They may offer the feasibility to be further developed for their smaller and controllable sizes, flexibility to be modified, relative low toxicity as well as ease of preparation. In this work, the recent progress of these nanoparticles were illustrated, and the antioxidant mechanism of the inorganic nanoparticles were introduced, which mainly included antioxidant enzyme-mimetic activity and antioxidant ROS/RNS scavenging activity. The antioxidant effects and the applications of several nanoparticles, such as CeO₃, Fe₃O₄, TiO₂ and Se, are summarized in this paper. The potential toxicity of these nanoparticles both in vitro and in vivo was well studied for the further applications. Future directions of how to utilize these inorganic nanoparticles to be further applied in some fields, such as medicine, cosmetic and functional food additives were also investigated in this paper.

Magnetic Self-Healing Hydrogel from Difunctional Polymers Prepared via the Kabachnik-Fields Reaction

The development of high quality magnetic self-healing hydrogels containing well-dispersed magnetic nanoparticle has been a challenging procedure due to unavailable methods of facilely introducing groups that can efficiently stabilize these magnetic nanoparticles in the self-healing hydrogels. In this research, a polymer containing both phenylboronic acid (PBA) and phosphonic acid (PA) groups has been developed by the Kabachnik-Fields (KF) reaction. This polymer well disperses iron oxide nanoparticles (IONPs) through the strong interactions between the PA groups and the surface of the IONPs; thus, this polymer effectively mixed IONPs and poly(vinyl alcohol) (PVA) to form a hydrogel containing well-dispersed IONPs. The resulting hydrogel is self-healing, owing to the dynamic borate ester linkages. Moreover, the presence of the IONPs endowed the hydrogel with magnetic properties, also making it heat-responsive in an alternating magnetic field and expanding its application as a contrast agent for magnetic resonance imaging. The magnetic self-healing hydrogel showed excellent biosafety properties in animal experiments, suggesting its potential as an injectable implant material for biological and medical applications. This research exploits a biocompatible magnetic self-healing hydrogel with well-dispersed IONPs, demonstrating the value of the KF reaction in the development of functional polymers and smart materials, which might prompt a broad study of multicomponent reactions in interdisciplinary fields.

Antioxidant Activity and Toxicity Study of Cerium Oxide Nanoparticles Stabilized with Innovative Functional Copolymers

Oxidative stress, which is one of the main harmful mechanisms of pathologies including ischemic stroke, contributes to both neurons and endothelial cell damages, leading to vascular lesions. Although many antioxidants are tested in preclinical studies, no treatment is currently available for stroke patients. Since cerium oxide nanoparticles (CNPs) exhibit remarkable antioxidant capacities, the objective is to develop an innovative coating to enhance CNPs biocompatibility without disrupting their antioxidant capacities or enhance their toxicity. This study reports the synthesis and characterization of functional polymers and their impact on the enzyme-like catalytic activity of CNPs. To study the toxicity and the antioxidant properties of CNPs for stroke and particularly endothelial damages, in vitro studies are conducted on a cerebral endothelial cell line (bEnd.3). Despite their internalization in bEnd.3 cells, coated CNPs are devoid of cytotoxicity. Microscopy studies report an intracellular localization of CNPs, more precisely in endosomes. All CNPs reduces glutamate-induced intracellular production of reactive oxygen species (ROS) in endothelial cells but one CNP significantly reduces both the production of mitochondrial superoxide anion and DNA oxidation. In vivo studies report a lack of toxicity in mice. This study therefore describes and identifies biocompatible CNPs with interesting antioxidant properties for ischemic stroke and related pathologies.

USPIO-PEG nanoparticles functionalized with a highly specific collagen-binding peptide: a step towards MRI diagnosis of fibrosis

Fibrosis is characterized by a pathologic deposition of collagen I, leading to impaired function of organs. Tissue biopsy is the gold standard method for the diagnosis of fibrosis but this is an invasive procedure, subject to sampling errors. Several non-invasive techniques such as magnetic resonance imaging (MRI) using non-specific probes have been developed but they are not fully satisfying as they allow diagnosis at a late stage. In this study, collagelin, a collagen-binding peptide has been covalently linked using click chemistry to pegylated Ultra Small Super Paramagnetic Iron Oxide Nanoparticles (USPIO-PO-PEG-collagelin NPs) with the aim of diagnosing fibrosis at an early stage by MRI. USPIO-PO-PEG-collagelin NPs showed a high affinity for collagen I, two times higher than that of free collagelin whereas not peptide labeled USPIO NPs (USPIO-PO-PEG-yne) did not present any affinity. NPs were not toxic for macrophages and fibroblasts. Diffusion through collagen hydrogels concentrated at 3 and 10 mg mL-1 revealed a large accumulation of USPIO-PO-PEG-collagelin NPs within the collagen network after 72 hours, ca. 3 times larger than that of unlabeled USPIO, thereby evidencing the specific targeting of collagen I. Moreover, the quantity of USPIO-PO-PEG-collagelin NPs accumulated within hydrogels was proportional to the collagen concentration. Subsequently, the NPs diffusion through collagen hydrogels was monitored by MRI. The MRI T2 time relaxation decreased much more significantly with depth for USPIO-PO-PEG-collagelin NPs compared to unlabeled ones. Taken together, these results show that USPIO-PEG-collagelin NPs are promising as effective MRI nanotracers for molecular imaging of fibrosis at an early stage.

Polymer-Coated Cerium Oxide Nanoparticles as Oxidoreductase-like Catalysts

Cerium oxide nanoparticles have been shown to mimic oxidoreductase enzymes by catalyzing the decomposition of organic substrates and reactive oxygen species. This mimicry can be found in superoxide radicals and hydrogen peroxides, which are harmful molecules produced in oxidative stress-associated diseases. Despite the fact that nanoparticle functionalization is mandatory in the context of nanomedicine, the influence of polymer coatings on their enzyme-like catalytic activity is poorly understood. In this work, six polymer-coated cerium oxide nanoparticles are prepared by the association of 7.8 nm cerium oxide cores with two poly(sodium acrylate) and four poly(ethylene glycol) (PEG)-grafted copolymers with different terminal or anchoring end groups, such as phosphonic acids. The superoxide dismutase-, catalase-, peroxidase-, and oxidase-like catalytic activities of the coated nanoparticles were systematically studied. It is shown that the polymer coatings do not affect the superoxide dismutase-like, impair the catalase-like and oxidase-like, and surprisingly improves peroxidase-like catalytic activities of cerium oxide nanoparticles. It is also demonstrated that the particles coated with the PEG-grafted copolymers perform better than the poly(acrylic acid)-coated ones as oxidoreductase-like enzymes, a result that confirms the benefit of having phosphonic acids as anchoring groups at the particle surface.

Synthesis of Cerium Oxide Nanoparticles Using Various Methods: Implications for Biomedical Applications

Cerium oxide nanoparticles have been used in a number of non-medical products over the years. The therapeutic application of these nanoparticles has mainly been due to their oxidative stress ameliorating abilities. Their enzyme-mimetic catalytic ability to change between the Ce3+ and Ce4+ species makes them ideal for a role as free-radical scavengers for systemic diseases as well as neurodegenerative diseases. In this review, we look at various methods of synthesis (including the use of stabilizing/capping agents and precursors), and how the synthesis method affects the physicochemical properties, their behavior in biological environments, their catalytic abilities as well as their reported toxicity.

Luminescent zinc oxide nanoparticles: from stabilization to slow digestion depending on the nature of polymer coating

PEG-b-PAA and PEG-b-PVPA copolymers stabilize luminescent ZnO NPs in THF and enable their transfer to water.

The enzyme-like catalytic activity of cerium oxide nanoparticles and its dependency on Ce3+ surface area concentration

Cerium oxide nanoparticles are known to catalyze the decomposition of reactive oxygen species such as the superoxide radical and hydrogen peroxide. Herein, we examine the superoxide dismutase (SOD) and catalase (CAT) mimetic catalytic activities of nanoceria and demonstrate the existence of generic behaviors. For particles of sizes 4.5, 7.8, 23 and 28 nm, the SOD and CAT catalytic activities exhibit the characteristic shape of a Langmuir isotherm as a function of cerium concentration. The results show that the catalytic effects are enhanced for smaller particles and for the particles with the largest Ce3+ fraction. The SOD-like activity obtained from the different samples is found to superimpose on a single master curve using the Ce3+ surface area concentration as a new variable, indicating the existence of particle independent redox mechanisms. For the CAT assays, the adsorption of H2O2 molecules at the particle surface modulates the efficacy of the decomposition process and must be taken into account. We design an amperometry-based experiment to evaluate the H2O2 adsorption at nanoceria surfaces, leading to the renormalization of the particle specific area. Depending on the particle type the amount of adsorbed H2O2 molecules varies from 2 to 20 nm-2. The proposed scalings are predictive and allow the determination of the SOD and CAT catalytic properties of cerium oxide solely from physicochemical features.

Supported pulmonary surfactant bilayers on silica nanoparticles: formulation, stability and impact on lung epithelial cells

Studies have shown that following exposure to particulate matter, ultrafine fractions (<100 nm) may deposit along the respiratory tract down to the alveolar region. To assess the effects of nanoparticles on the lungs, it is essential to address the question of their biophysicochemical interaction with the different pulmonary environments, including the lung lining fluids and the epithelia. Here we examine one of these interactive scenarios and study the role of supported lipid bilayers (SLB) in the effect of 40 nm fluorescent silica particles on living cells. We first study the particle phase behavior in the presence of Curosurf®, a pulmonary surfactant substitute used in replacement therapies. It is found that Curosurf® vesicles interact strongly with the nanoparticles, but do not spontaneously form SLBs. To achieve this goal, we use sonication to reshape the vesicular membranes and induce lipid fusion around the particles. Centrifugal sedimentation and electron microscopy are carried out to determine the optimum coating conditions and layer thickness. We then explore the impact of surfactant SLBs on the cytotoxic potential and interactions towards a malignant epithelial cell line. All in vitro assays indicate that SLBs mitigate the particle toxicity and internalization rates. In the cytoplasm, the particle localization is also strongly coating dependent. It is concluded that SLBs profoundly affect cellular interactions and functions in vitro and could represent an alternative strategy for particle coating. The current data also shed some light on the potential mechanisms pertaining to the particle or pathogen transport through the air-blood barrier.

Serum Protein-Resistant Behavior of Multisite-Bound Poly(ethylene glycol) Chains on Iron Oxide Surfaces

Recent surveys have shown that the number of nanoparticle-based formulations actually used at a clinical level is significantly lower than that expected a decade ago. One reason for this is that the physicochemical properties of nanoparticles fall short for handling the complexity of biological environments and preventing nonspecific protein adsorption. In this study, we address the issue of the interactions of plasma proteins with polymer-coated surfaces. With this aim, we use a noncovalent grafting-to method to functionalize iron oxide sub-10 nm nanoparticles and iron oxide flat substrates and compare their protein responses. The functionalized copolymers consist of alternating poly(ethylene glycol) (PEG) chains and phosphonic acid grafted on the same backbone. Quartz crystal microbalance with dissipation was used to monitor polymer adsorption kinetics and evaluate the resistance to protein adsorption. On flat substrates, functionalized PEG copolymers adsorb and form a brush in moderate or highly stretched regimes, with densities between 0.15 and 1.5 nm-2. PEG layers using phosphonic acid as linkers exhibit excellent protein resistance. In contrast, layers prepared with carboxylic acid as the grafting agent exhibit mitigated protein responses and layer destructuration. The present study establishes a correlation between the long-term stability of PEG-coated particles in biofluids and the protein resistance of surfaces coated with the same polymers.

Cerium oxide nanoparticles: green synthesis and biological applications

CeO2 nanoparticles (NPs) have shown promising approaches as therapeutic agents in biology and medical sciences. The physicochemical properties of CeO2-NPs, such as size, agglomeration status in liquid, and surface charge, play important roles in the ultimate interactions of the NP with target cells. Recently, CeO2-NPs have been synthesized through several bio-directed methods applying natural and organic matrices as stabilizing agents in order to prepare biocompatible CeO2-NPs, thereby solving the challenges regarding safety, and providing the appropriate situation for their effective use in biomedicine. This review discusses the different green strategies for CeO2-NPs synthesis, their advantages and challenges that are to be overcome. In addition, this review focuses on recent progress in the potential application of CeO2-NPs in biological and medical fields. Exploiting biocompatible CeO2-NPs may improve outcomes profoundly with the promise of effective neurodegenerative therapy and multiple applications in nanobiotechnology.

Adsorption of Nanoceria by Phosphocholine Liposomes

Nanoceria (CeO₂ nanoparticle) possesses a number of enzyme-like activities. In particular, it scavenges reactive oxygen species based on in vitro and in vivo antioxidation studies. An important aspect of fundamental physical understanding is its interaction with lipid membranes that are the main components of the cell membrane. In this work, adsorption of nanoceria onto phosphocholine (PC) liposomes was performed. PC lipids are the main constituents of the cell outer membrane. Using a fluorescence quenching assay, a nanoceria adsorption isotherm was determined at various pH values and ionic strengths. A non-Langmuir isotherm occurred at pH 4 because of lateral electrostatic repulsion among the adsorbed cationic nanoceria. The phosphate group in the PC lipid is mainly responsible for the interaction, and the adsorbed nanoceria can be displaced by free inorganic phosphate. The tendency of the system to form large aggregates is a function of pH and the concentration of nanoceria, attributable to nanoceria being positively charged at pH 4 and neutral at physiological pH. Calcein leakage tests indicate that nanoceria induces liposome leakage because of transient lipid phase transition, and cryo-transmission electron microscopy indicates that the overall shape of the liposome is retained although deformation is still observed. This study provides fundamental biointerfacial information at a molecular level regarding the interaction of nanoceria and model cell membranes.

Synthesis, characterization and in vivo evaluation of a magnetic cisplatin delivery nanosystem based on PMAA-graft-PEG copolymers

The development of anticancer drug delivery systems which retain or enhance the cytotoxic properties of the drug to tumorous tissues, while reducing toxicity to other organs is of key importance. We investigated different poly(methacrylic acid)-g-poly(ethyleneglycol methacrylate) polymers as in situ coating agents for magnetite nanocrystallites. The obtained magnetic nano-assemblies were in turn thoroughly characterized for their structural, colloidal and physicochemical properties (drug loading capacity/release, magnetic field triggered drug release, cell uptake and localization) in order to select the best performing system. With the focus on in vivo validation of such magnetic drug delivery systems for first time, we selected cisplatin as the drug, since it is a potent anticancer agent which exhibits serious side effects due to lack of selectivity. In addition, cisplatin would offer facile determination of the metal content in the animal tissues for biodistribution studies. Alongside post-mortem Pt determination in the tissues, the biodistribution of the drug nanocarriers was also monitored in real time with PET-CT (positron emission tomography/computed tomography) with and without the presence of magnetic field gradients; using a novel chelator-free method, the nanoparticles were radiolabeled with ⁶⁸Ga without having to alter their structure with chemical modifications for conjugation of radiochelators. The ability to be radiolabeled in such a straightforward but very robust way, along with their measured high MRI response, renders them attractive for dual imaging, which is an important functionality for translational investigations. Their anticancer properties were evaluated in vitro and in vivo, in a cisplatin resistant HT-29 human colon adenocarcinoma model, with and without the presence of magnetic field gradients. Enhanced anticancer efficacy and reduced toxicity was recorded for the cisplatin-loaded nanocarriers in comparison to the free cisplatin, particularly when a magnetic field gradient was applied at the tumor site. Post mortem and real-time tissue distribution studies did not reveal increased cisplatin concentration in the tumor site, suggesting that the enhanced anticancer efficacy of the cisplatin-loaded nanocarriers is driven by mechanisms other than increased cisplatin accumulation in the tumors.

Advantages of poly(vinyl phosphonic acid)-based double hydrophilic block copolymers for the stabilization of iron oxide nanoparticles

Poly(ethylene glycol)–poly(vinylphosphonic acid) double hydrophilic block copolymers were synthesized by RAFT/MADIX polymerization and used to prepare stable iron oxide nanoparticles.

Delayed hepatic uptake of multi-phosphonic acid poly(ethylene glycol) coated iron oxide measured by real-time magnetic resonance imaging

We report on the synthesis, characterization, stability and pharmacokinetics of novel iron based contrast agents for magnetic resonance imaging (MRI).

Aqueous worm gels can be reconstituted from freeze-dried diblock copolymer powder

Worm-like diblock copolymer nanoparticles comprising poly(glycerol monomethacrylate) (PGMA) as a stabilizer block and poly(2-hydroxypropyl methacrylate) (PHPMA) as a core-forming block were readily synthesized at 10% w/w solids via aqueous dispersion polymerization at 70 °C using Reversible Addition-Fragmentation chain Transfer (RAFT) chemistry. On cooling to 20 °C, soft transparent free-standing gels are formed due to multiple inter-worm interactions. These aqueous PGMA-PHPMA diblock copolymer worms were freeze-dried, then redispersed in water with cooling to 3-5 °C before warming up to 20 °C; this protocol ensures molecular dissolution of the copolymer chains, which aids formation of a transparent aqueous gel. Rheology, SAXS and TEM studies confirm that such reconstituted gels comprise formed PGMA-PHPMA copolymer worms and they possess essentially the same physical properties determined for the original worm gels prior to freeze-drying. Such worm gel reconstitution is expected to be highly beneficial in the context of various biomedical applications, since it enables worm gels to be readily prepared using a wide range of cell growth media as the continuous aqueous phase.

Role of the surface chemistry of ceria surfaces on silicate adsorption

Ceria nanoparticles (NPs) have been widely explored as a promising material in various fields. As synthesized under various physicochemical conditions, it exhibits the different surface chemistry. Here, the role of hydroxyl and nitrate group on ceria surface, formed under various physicochemical conditions, for the silicate adsorption was experimentally and theoretically investigated based on the adsorption isotherms and theoretical analyses using density functional theory (DFT) calculation. Experimental results acquired from adsorption isotherms with Freundlich model indicated that the nitrate group shows a much higher affinity with silicate than the hydroxyl groups. These phenomena were demonstrated through the theoretical approaches that exhibit the binding energy of the NO3-ceria (-4.383 eV) on the SiO2 surface being much higher than that of the OH-ceria (-3.813 eV). In good agreement with the experimental and the theoretical results based on adsorption properties, the results of chemical mechanical planarization (CMP) also show that the nitrate groups significantly enhance the removal of SiO2 than the hydroxyl groups. The results investigated in this study will provide researchers, studying the ceria NPs, with guidelines on the importance of exploring the surface chemistry of ceria.

Understanding the adsorption interface of polyelectrolyte coating on redox active nanoparticles using soft particle electrokinetics and its biological activity

The application of cerium oxide nanoparticles (CNPs) for therapeutic purposes requires a stable dispersion of nanoparticles in a biological environment. The objective of this study is to tailor the properties of polyelectrolyte coated CNPs as a function of molecular weight to achieve a stable and catalytic active dispersion. The coating of CNPs with polyacrylic acid (PAA) has increased the dispersion stability of CNPs and enhanced the catalytic ability. The stability of PAA coating was analyzed using the change in the Gibbs free energy computed by the Langmuir adsorption model. The adsorption isotherms were determined using soft particle electrokinetics which overcomes the challenges presented by other techniques. The change in Gibbs free energy was highest for CNPs coated with PAA of 250 kg/mol indicating the most stable coating. The change in free energy for PAA of 100 kg/mol coated CNPs was 85% lower than the PAA of 250 kg/mol coated CNPs. This significant difference is caused by the strong adsorption of PAA of 100 kg/mol on CNPs. Catalytic activity of PAA-CNPs is assessed by the catalase enzymatic mimetic activity of nanoparticles. The catalase activity was higher for PAA coated CNPs as compared to bare CNPs which indicated preferential adsorption of hydrogen peroxide induced by coating. This indicates that the catalase activity is also affected by the structure of the coating layer.

Alendronate as a robust anchor for ceria nanoparticle surface coating: facile binding and improved biological properties

Using alendronate as anchor, functional molecules could be easily grafted onto ceria nanoparticle leading to enhanced bioproperties of the nanoparticles.

In vitro toxicity of nanoceria: effect of coating and stability in biofluids

Due to the increasing use of nanometric cerium oxide in applications, concerns about the toxicity of these particles have been raised and have resulted in a large number of studies. We report here on the interactions between 7 nm anionically charged cerium oxide particles and living mammalian cells. By a modification of the particle coating including low-molecular weight ligands and polymers, two generic behaviours are compared: particles coated with citrate ions that precipitate in biofluids and particles coated with poly(acrylic acid) that are stable and remain nanometric. We find that nanoceria covered with both coating agents are taken up by mouse fibroblasts and localized into membrane-bound compartments. However, flow cytometry and electron microscopy reveal that as a result of their precipitation, citrate-coated particles interact more strongly with cells. At cerium concentration above 1 mM, only citrate-coated nanoceria (and not particles coated with poly(acrylic acid)) display toxicity and moderate genotoxicity. The results demonstrate that the control of the surface chemistry of the particles and its ability to prevent aggregation can affect the toxicity of nanomaterials.

Dispersion and surface functionalization of oxide nanoparticles for transparent photocatalytic and UV-protecting coatings and sunscreens

This review describes recent efforts on the synthesis, dispersion and surface functionalization of the three dominating oxide nanoparticles used for photocatalytic, UV-blocking and sunscreen applications: titania, zinc oxide, and ceria. The gas phase and liquid phase synthesis is described briefly and examples are given of how weakly aggregated photocatalytic or UV-absorbing oxide nanoparticles with different composition, morphology and size can be generated. The principles of deagglomeration are reviewed and the specific challenges for nanoparticles highlighted. The stabilization of oxide nanoparticles in both aqueous and non-aqueous media requires a good understanding of the magnitude of the interparticle forces and the surface chemistry of the materials. Quantitative estimates of the Hamaker constants in various media and measurements of the isoelectric points for the different oxide nanoparticles are presented together with an overview of different additives used to prepare stable dispersions. The structural and chemical requirements and the various routes to produce transparent photocatalytic and nanoparticle-based UV-protecting coatings, and UV-blocking sunscreens are described and discussed.

Stabilization of iron oxide nanoparticles in high sodium and calcium brine at high temperatures with adsorbed sulfonated copolymers

A series of sulfonated random and block copolymers were adsorbed on the surface of ~100 nm iron oxide (IO) nanoparticles (NPs) to provide colloidal stability in extremely concentrated brine composed of 8% wt NaCl + 2% wt CaCl2 (API brine; 1.4 M NaCl + 0.2 M CaCl2) at 90 °C. A combinatorial materials chemistry approach, which employed Ca(2+)-mediated adsorption of anionic acrylic acid-containing sulfonated polymers to preformed citrate-stabilized IO nanoclusters, enabled the investigation of a large number of polymer coatings. Initially a series of poly(2-methyl-2-acrylamidopropanesulfonate-co-acrylic acid) (poly(AMPS-co-AA)) (1:8 to 1:1 mol:mol), poly(styrenesulfonate-block-acrylic acid) (2.4:1 mol:mol), and poly(styrenesulfonate-alt-maleic acid) (3:1 mol:mol) copolymers were screened for solubility in API brine at 90 °C. The ratio of AMPS to AA groups was varied to balance the requirement of colloid dispersibility at high salinity (provided by AMPS) against the need for anchoring of the polymers to the iron oxide surface (via the AA). Steric stabilization of IO NPs coated with poly(AMPS-co-AA) (1:1 mol:mol) provided colloidal stability in API brine at room temperature and 90 °C for up to 1 month. The particles were characterized before and after coating at ambient and elevated temperatures by a variety of techniques including colloidal stability experiments, dynamic light scattering, zeta potential, and thermogravimetric analysis.

Repeptization by dissolution in a colloidal system of iron(III) pyrophosphate

Repeptization (redispersion) from an aggregated state is usually only possible in charge-stabilized colloidal systems if the system is either coagulated in the secondary minimum of the interaction potential or if the system cannot settle completely into the primary minimum. In this work, we analyze the zeta potential, conductivity, and long-term stability of colloidal systems of iron(III) pyrophosphate and surprisingly find that the system seems to defy conventional wisdom as it can be repeptized from its coagulated state regardless of aging time and background ions. Moreover, after having been stored for up to a month in 2 M NaCl, dialysis of iron pyrophosphate will yield a colloidal dispersion that is actually stable for a longer period of time than a fresh system with background electrolyte removed.