Refined solution structure of the DNA-binding domain of GAL4 and use of 3J(113Cd,1H) in structure determination

Construction of an economical xylose-utilizing Saccharomyces cerevisiae and its ethanol fermentation

Traditional industrial Saccharomyces cerevisiae could not metabolize xylose due to the lack of a specific enzyme system for the reaction from xylose to xylulose. This study aims to metabolically remould industrial S. cerevisiae for the purpose of utilizing both glucose and xylose with high efficiency. Heterologous gene xylA from Piromyces and homologous genes related to xylose utilization were selected to construct expression cassettes and integrated into genome. The engineered strain was domesticated with industrial material under optimizing conditions subsequently to further improve xylose utilization rates. The resulting S. cerevisiae strain ABX0928-0630 exhibits a rapid growth rate and possesses near 100% xylose utilization efficiency to produce ethanol with industrial material. Pilot-scale fermentation indicated the predominant feature of ABX0928-0630 for industrial application, with ethanol yield of 0.48 g/g sugars after 48 hours and volumetric xylose consumption rate of 0.87 g/l/h during the first 24 hours. Transcriptome analysis during the modification and domestication process revealed a significant increase in the expression level of pathways associated with sugar metabolism and sugar sensing. Meanwhile, genes related to glycerol lipid metabolism exhibited a pattern of initial increase followed by a subsequent decrease, providing a valuable reference for the construction of efficient xylose-fermenting strains.

Zinc finger structure determination by NMR: Why zinc fingers can be a handful

Zinc fingers can be loosely defined as protein domains containing one or more tetrahedrally-co-ordinated zinc ions whose role is to stabilise the structure rather than to be involved in enzymatic chemistry; such zinc ions are often referred to as "structural zincs". Although structural zincs can occur in proteins of any size, they assume particular significance for very small protein domains, where they are often essential for maintaining a folded state. Such small structures, that sometimes have only marginal stability, can present particular difficulties in terms of sample preparation, handling and structure determination, and early on they gained a reputation for being resistant to crystallisation. As a result, NMR has played a more prominent role in structural studies of zinc finger proteins than it has for many other types of proteins. This review will present an overview of the particular issues that arise for structure determination of zinc fingers by NMR, and ways in which these may be addressed.

A Glimpse to Background and Characteristics of Major Molecular Biological Networks

Recently, biology has become a data intensive science because of huge data sets produced by high throughput molecular biological experiments in diverse areas including the fields of genomics, transcriptomics, proteomics, and metabolomics. These huge datasets have paved the way for system-level analysis of the processes and subprocesses of the cell. For system-level understanding, initially the elements of a system are connected based on their mutual relations and a network is formed. Among omics researchers, construction and analysis of biological networks have become highly popular. In this review, we briefly discuss both the biological background and topological properties of major types of omics networks to facilitate a comprehensive understanding and to conceptualize the foundation of network biology.

Structural features specific to plant metallothioneins

The metallothionein (MT) superfamily combines a large variety of small cysteine-rich proteins from nearly all phyla of life that have the ability to coordinate various transition metal ions, including Zn(II), Cd(II), and Cu(I). The members of the plant MT family are characterized by great sequence diversity, requiring further subdivision into four subfamilies. Very peculiar and not well understood is the presence of rather long cysteine-free amino acid linkers between the cysteine-rich regions. In light of the distinct differences in sequence to MTs from other families, it seems obvious to assume that these differences will also be manifested on the structural level. This was already impressively demonstrated with the elucidation of the three-dimensional structure of the wheat E(c)-1 MT, which revealed two metal cluster arrangements previously unprecedented for any MT. However, as this structure is so far the only one available for the plant MT family, other sources of information are in high demand. In this review the focus is thus set on any structural features known, deduced, or assumed for the plant MT proteins. This includes the determination of secondary structural elements by circular dichroism, IR, and Raman spectroscopy, the analysis of the influence of the long linker regions, and the evaluation of the spatial arrangement of the sequence separated cysteine-rich regions with the aid of, e.g., limited proteolytic digestion. In addition, special attention is paid to the contents of divalent metal ions as the metal ion to cysteine ratios are important for predicting and understanding possible metal-thiolate cluster structures.

Protein and metal cluster structure of the wheat metallothionein domain γ-E(c)-1: the second part of the puzzle

Metallothioneins (MTs) are small cysteine-rich proteins coordinating various transition metal ions, including Zn(II), Cd(II), and Cu(I). MTs are ubiquitously present in all phyla, indicating a successful molecular concept for metal ion binding in all organisms. The plant MT E(c)-1 from Triticum aestivum, common bread wheat, is a Zn(II)-binding protein that comprises two domains and binds up to six metal ions. The structure of the C-terminal four metal ion binding β(E) domain was recently described. Here we present the structure of the N-terminal second domain, γ-E(c)-1, determined by NMR spectroscopy. The γ-E(c)-1 domain enfolds an M (2) (II) Cys(6) cluster and was characterized as part of the full-length Zn(6)E(c)-1 protein as well as in the form of the separately expressed domain, both in the Zn(II)-containing isoform and the Cd(II)-containing isoform. Extended X-ray absorption fine structure analysis of Zn(2)γ-E(c)-1 clearly shows the presence of a ZnS(4) coordination sphere with average Zn-S distances of 2.33 Å. (113)Cd NMR experiments were used to identify the M(II)-Cys connectivity pattern, and revealed two putative metal cluster conformations. In addition, the general metal ion coordination abilities of γ-E(c)-1 were probed with Cd(II) binding experiments as well as by pH titrations of the Zn(II) and Cd(II) forms, the latter suggesting an interaction of the γ domain and the β(E) domain within the full-length protein.

Engineered biological entities for drug delivery and gene therapy protein nanoparticles

The development of genetic engineering techniques has speeded up the growth of the biotechnological industry, resulting in a significant increase in the number of recombinant protein products on the market. The deep knowledge of protein function, structure, biological interactions, and the possibility to design new polypeptides with desired biological activities have been the main factors involved in the increase of intensive research and preclinical and clinical approaches. Consequently, new biological entities with added value for innovative medicines such as increased stability, improved targeting, and reduced toxicity, among others have been obtained. Proteins are complex nanoparticles with sizes ranging from a few nanometers to a few hundred nanometers when complex supramolecular interactions occur, as for example, in viral capsids. However, even though protein production is a delicate process that imposes the use of sophisticated analytical methods and negative secondary effects have been detected in some cases as immune and inflammatory reactions, the great potential of biodegradable and tunable protein nanoparticles indicates that protein-based biotechnological products are expected to increase in the years to come.

Mutational analysis of the zinc- and substrate-binding sites in the CphA metallo-beta-lactamase from Aeromonas hydrophila

The subclass B2 CphA (Carbapenemase hydrolysing Aeromonas) beta-lactamase from Aeromonas hydrophila is a Zn(2+)-containing enzyme that specifically hydrolyses carbapenems. In an effort to evaluate residues potentially involved in metal binding and/or catalysis (His(118), Asp(120), His(196) and His(263)) and in substrate specificity (Val(67), Thr(157), Lys(224) and Lys(226)), site-directed mutants of CphA were generated and characterized. Our results confirm that the first zinc ion is in interaction with Asp(120) and His(263), and thus is located in the 'cysteine' zinc-binding site. His(118) and His(196) residues seem to be interacting with the second zinc ion, as their replacement by alanine residues has a negative effect on the affinity for this second metal ion. Val(67) plays a significant role in the binding of biapenem and benzylpenicillin. The properties of a mutant with a five residue (LFKHV) insertion just after Val(67) also reveals the importance of this region for substrate binding. This latter mutant has a higher affinity for the second zinc ion than wild-type CphA. The T157A mutant exhibits a significantly modified activity spectrum. Analysis of the K224Q and N116H/N220G/K224Q mutants suggests a significant role for Lys(224) in the binding of substrate. Lys(226) is not essential for the binding and hydrolysis of substrates. Thus the present paper helps to elucidate the position of the second zinc ion, which was controversial, and to identify residues important for substrate binding.

Engineering yeasts for xylose metabolism

Technologies for the production of alternative fuels are receiving increased attention owing to concerns over the rising cost of petrol and global warming. One such technology under development is the use of yeasts for the commercial fermentation of xylose to ethanol. Several approaches have been employed to engineer xylose metabolism. These involve modeling, flux analysis, and expression analysis followed by the targeted deletion or altered expression of key genes. Expression analysis is increasingly being used to target rate-limiting steps. Quantitative metabolic models have also proved extremely useful: they can be calculated from stoichiometric balances or inferred from the labeling of intermediate metabolites. The recent determination of the genome sequence for P. stipitis is important, as its genome characteristics and regulatory patterns could serve as guides for further development in this natural xylose-fermenting yeast or in engineered Saccharomyces cerevisiae. Lastly, strain selection through mutagenesis, adaptive evolution or from nature can also be employed to further improve activity.

Site-selective metal binding by designed alpha-helical peptides

It is known that the designed alpha-helical peptide family TRI [(Ac-G(LKALEEK)4G-CONH2)], containing single site substitution of a cysteine for a leucine, is capable of binding Cd(II) within a three-stranded coiled coil. The binding affinity of cadmium is dependent upon the site of substitution, with cysteine incorporated at the a site leading to cadmium complexes of higher affinity than when a d site was modified. In this work we have examined whether this differential binding affinity can be expressed in a di-cysteine-substituted peptide in order to develop site specificity within a designed system. The peptide TRI L9CL19C was used to determine whether significant differences in binding affinities at nearly proximal sites could be achieved in a short designed peptide. On the basis of 113Cd, 1H NMR, and circular dichroic spectroscopies, we have shown that 1 equiv of Cd(II) binds exclusively at the a site. Only after that position is filled does the second site become populated. Thus, the TRI system represents the first example where stoichiometrically equivalent peptides with different sequences form the framework for designing molecular assemblies that show site-specific ion recognition. We propose that the distinct metal affinities are due to the cysteine conformers at different substitution points along the peptide. Furthermore, we have shown that site selectivity in biomolecules can be encoded into relatively short peptides with helical sequences and, therefore, do not necessarily require the extensive protein scaffolds found in natural systems.

Parallel, quantitative measurement of protein binding to a 120-element double-stranded DNA array in real time using surface plasmon resonance microscopy

Quantitative, real-time measurement of kinetics of sequence-specific binding of DNA-binding proteins to double-stranded DNA (dsDNA) immobilized in a 10 x 12 array on a planar gold surface is demonstrated using surface plasmon resonance (SPR) microscopy. This binding of the yeast transcription factor Gal4 to a 120-spot dsDNA array made with alternating 200-microm spots of its dsDNA operator sequence and an unrelated DNA sequence proves that this method could be used to simultaneously monitor the kinetics of binding of proteins to 120 different dsDNA sequences with a sensitivity to approximately 0.5 pg (<2 x 10(7) molecules) of bound protein in each array spot at a time resolution of 1 s. The method is label free and also allows absolute quantitative determination of the binding stoichiometry (i.e., the number of proteins bound per dsDNA) at each time. The dsDNA array was fabricated using a robotic microspotting system to deliver nanoliter droplets of biotinylated dsDNA solutions onto a streptavidin linker layer immobilized with biotinylated alkylthiols on a thin gold film. Simultaneous monitoring of binding to the many array elements allows the use of reference spots (i.e., array elements with unrelated dsDNA sequences) to correct the signal for nonspecific protein-DNA binding and changes in bulk refractive index of the solutions in the SPR microscope's flow cell. This allows high-throughput analyses of the kinetics and equilibrium of protein-dsDNA binding.

Solution structure of the two-iron rubredoxin of Pseudomonas oleovorans determined by NMR spectroscopy and solution X-ray scattering and interactions with rubredoxin reductase

Here we provide insights into the molecular structure of the two-iron 19-kDa rubredoxin (AlkG) of Pseudomonas oleovorans using solution-state nuclear magnetic resonance (NMR) and small-angle X-ray scattering studies. Sequence alignment and biochemical studies have suggested that AlkG comprises two rubredoxin folds connected by a linker region of approximately 70 amino acid residues. The C-terminal domain (C-Rb) of this unusual rubredoxin, together with approximately 35 amino acid residues of the predicted linker region, was expressed in Escherichia coli, purified in the one-iron form and the structure of the cadmium-substituted form determined at high-resolution by NMR spectroscopy. The structure shows that the C-Rb domain is similar in fold to the conventional one-iron rubredoxins from other organisms, whereas the linker region does not have any discernible structure. This tandem "flexible-folded" structure of the polypeptide chain derived for the C-Rb protein was confirmed using solution X-ray scattering methods. X-ray scattering studies of AlkG indicated that the 70-amino acid residue linker forms a structured, yet mobile, polypeptide segment connecting the globular N- and C-terminal domains. The X-ray scattering studies also showed that the N-terminal domain (N-Rb) has a molecular conformation similar to that of C-Rb. The restored molecular shape indicates that the folded N-Rb and C-Rb domains of AlkG are noticeably separated, suggesting some domain movement on complex formation with rubredoxin reductase to allow interdomain electron transfer between the metal centers in AlkG. This study demonstrates the advantage of combining X-ray scattering and NMR methods in structural studies of dynamic, multidomain proteins that are not suited to crystallographic analysis. The study forms a structural foundation for functional studies of the interaction and electron-transfer reactions of AlkG with rubredoxin reductase, also reported herein.

The inhibitor thiomandelic acid binds to both metal ions in metallo-beta-lactamase and induces positive cooperativity in metal binding

Thiomandelic acid is a simple, broad spectrum, and reasonably potent inhibitor of metallo-beta-lactamases, enzymes that mediate resistance to beta-lactam antibiotics. We report studies by NMR and perturbed angular correlation (PAC) spectroscopy of the mode of binding of the R and S enantiomers of thiomandelic acid, focusing on their interaction with the two metal ions in cadmium-substituted Bacillus cereus metallo-beta-lactamase. The 113Cd resonances are specifically assigned to the metals in the two individual sites on the protein by using 113Cd-edited 1H NMR spectra. Each enantiomer of thiomandelate produces large downfield shifts of both 113Cd resonances and changes in the PAC spectra, which indicate that they bind such that the thiol of the inhibitor bridges between the two metals. For R-thiomandelate, this is unambiguously confirmed by the observation of scalar coupling between Halpha of the inhibitor and both cadmium ions. The NMR and PAC spectra reveal that the two chiral forms of the inhibitor differ in the details of their coordination geometry. The complex with R-thiomandelate, but not that with the S-enantiomer, shows evidence in the PAC spectra of a dynamic process in the nanosecond time regime, the possible nature of which is discussed. The thiomandelate complex of the mononuclear enzyme can be detected only at low metal to enzyme stoichiometry; the relative populations of mononuclear and binuclear enzyme as a function of cadmium concentration provide clear evidence for positive cooperativity in metal ion binding in the presence of the inhibitor, in contrast to the negative cooperativity observed in the free enzyme.

Structure determination of membrane-associated proteins from nuclear magnetic resonance data

This Review covers the delineation and optimization of protein-lipid systems for study using solution-state NMR spectroscopy. The first half presents the necessary background for a membrane protein biochemist to initiate collaboration with an NMR spectroscopist. The second half provides guidelines for the spectroscopist on data collection, analysis for obtaining conformational information, and structure generation and assessment. Although the emphasis is on the study of peptides in detergent micelles, methods are outlined for larger membrane-associated proteins and for use of other solubilizing agents.