Smectic ordering in solutions and films of a rod-like polymer owing to monodispersity of chain length

Synthesis and Thermoreversible Gelation of Coil-Rod Copolymers with a Dendritic Polyethylene Core and Multiple Helical Poly(γ-benzyl-L-glutamate) Arms

Coil-rod copolymers with a dendritic polyethylene (DPE) core and multiple helical poly(γ-benzyl-L-glutamate) (PBLG) arms (DPE-(PBLG)n) were prepared by palladium-catalyzed copolymerization in tandem with ring-opening polymerization (ROP). Macroinitiator (DPE-(NH2)11) was firstly prepared by the group transformation of DPE-(OH)11 generated from palladium-catalyzed copolymerization of ethylene and acrylate comonomer. Coil-helical DPE-(PBLG)11 copolymers were prepared by ROP of γ-benzyl-L-glutamate-N-carboxyanhydride (BLG-NCA). These DPE-(PBLG)11 copolymers could form thermoreversible gels in toluene solvent, and the dendritic topology of the DPE core increased the critical gelation concentrations. The self-assembled nanostructure of gels was fully characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), small-angle X-ray scattering (SAXS), and wide-angle X-ray diffraction (WAXD), and the morphology of the fibrous structure was a twisted flat ribbon through a self-assembled nanoribbon mechanism. The self-assembled fibers formed by DPE-(PBLG45)11 are more heterogeneous and ramified than previously observed fibers formed by PBLG homopolymer and block copolymers.

Amphiphilic Polyethylene-b-poly(L-lysine) Block Copolymer: Synthesis, Self-Assembly, and Responsivity

Polyethylene-b-polypeptide copolymers are biologically interesting, but studies of their synthesis and properties are very few. This paper reports synthesis and characterization of well-defined amphiphilic polyethylene-block-poly(L-lysine) (PE-b-PLL) block copolymers by combining nickel-catalyzed living ethylene polymerization with controlled ring-opening polymerization (ROP) of ε-benzyloxycarbonyl-L-lysine-N-carboxyanhydride (Z-Lys-NCA) and sequential post-functionalization. Amphiphilic PE-b-PLL block copolymers self-assembled into spherical micelles with a hydrophobic PE core in aqueous solution. The pH and ionic responsivities of PE-b-PLL polymeric micelles were investigated by means of fluorescence spectroscopy, dynamic light scattering, UV-circular dichroism, and transmission electron microscopy. The variation of pH values led to the conformational alteration of PLL from α-helix to coil, thereby changing the micelle dimensions.

Myosin assembly of smooth muscle: from ribbons and side polarity to a row polar helical model

After decades of debate over the structure of smooth muscle myosin filaments, it is still unclear whether they are helical, as in all other muscle types, or square in shape. In both cases bipolar building units are proposed, but the deduced cross-bridge arrangements are fundamentally different. The opposite polarity of the adjusting longitudinal rows is proposed for the helical structure, while in the case of square filaments, or myosin ribbons, only their two faces are appositively polarized. Analysis of our unpublished archival data on light meromyosin (LMM) paracrystals and myosin rod assemblies as well as the filaments themselves indicated that the rods were assembled with a 6°-7° tilt angle from the rods' longitudinal axis, in contrast to the lack of tilt in LMM, both exhibiting a 14.3 nm myosin periodicity. Optical diffraction analysis of EM images of the rod assemblies and those of intact myosin confirmed their helical architecture characterized by 28 nm residue translations, 172 nm repeats and 516 nm pitch. A detailed helical model of these filaments was elucidated with bipolar tetramer building units made of two polar trimers. The filaments elongate at their two ends in a head-to-head manner, enabling targeted cross-bridge polarity of the adjacent rows, in the form of a unique Boerdijk-Coxeter type helix, similar to that of collagen or desmin fibers, with the covalent links replaced by a head-to-head clasp.

Structural Order in Cellulose Thin Films Prepared from a Trimethylsilyl Precursor

Biopolymer cellulose is investigated in terms of the crystallographic order within thin films. The films were prepared by spin-coating of a trimethylsilyl cellulose precursor followed by an exposure to HCl vapors; two different source materials were used. Careful precharacterization of the films was performed by infrared spectroscopy and atomic force microscopy. Subsequently, the films were investigated by grazing incidence X-ray diffraction using synchrotron radiation. The results showed broad diffraction peaks, indicating a rather short correlation length of the molecular packing in the range of a few nanometers. The analysis of the diffraction patterns was based on the known structures of crystalline cellulose, as the observed peak pattern was comparable to cellulose phase II and phase III. The dominant fraction of the film is formed by two different types of layers, which are oriented parallel to the substrate surface. The stacking of the layers results in a one-dimensional crystallographic order with a defined interlayer distance of either 7.3 or 4.2 Å. As a consequence, two different preferred orientations of the polymer chains are observed. In both cases, polymer chain axes are aligned parallel to the substrate surface, and the orientation of the cellulose molecules are concluded to be either edge-on or flat-on. A minor fraction of the cellulose molecules form nanocrystals that are randomly distributed within the films. In this case, the molecular packing density was found to be smaller in comparison to the known crystalline phases of cellulose.

Electrochemically Directed Assembly of Designer Coiled-Coil Telechelic Proteins

We report the design and characterization of a de novo electrogelation protein comprising a central spider silk glue motif flanked by terminal pH-triggered coiled-coil domains. The coiled-coiled domains were designed to form intramolecular helix bundles below a sharply defined pH-trigger point (∼pH 5.3), whereas the spider silk glue protein, because of its substantial Glu content, serves both as an anionic electrophoretic transport element at neutral and elevated pH and as a disordered linker chain between the associated helix bundles at reduced pH. We show that in an electrochemical cell, a solution of these telechelic proteins migrates toward the anode where the terminal coiled-coil domains are triggered to form coiled-coil assemblies that act as transient cross-links for the e-gel state. Upon cessation of the current, the coiled-coil domains become denatured and the e-gel transforms back into a fluid solution of polypeptides in a fully reversible manner. This simplified triblock protein design mimics many of the characteristics of more complex electrogelation proteins, such as silk fibroin. As such, it provides some insight into possible general mechanisms of protein electrogelation. Moreover, this general class of electrogelation proteins has the potential for biomedical applications of electrochemically triggered gelation, such as externally switchable delivery of therapeutic cell and drugs from a responsive matrix.

Hexagonally Ordered Arrays of α-Helical Bundles Formed from Peptide-Dendron Hybrids

Combining monodisperse building blocks that have distinct folding properties serves as a modular strategy for controlling structural complexity in hierarchically organized materials. We combine an α-helical bundle-forming peptide with self-assembling dendrons to better control the arrangement of functional groups within cylindrical nanostructures. Site-specific grafting of dendrons to amino acid residues on the exterior of the α-helical bundle yields monodisperse macromolecules with programmable folding and self-assembly properties. The resulting hybrid biomaterials form thermotropic columnar hexagonal mesophases in which the peptides adopt an α-helical conformation. Bundling of the α-helical peptides accompanies self-assembly of the peptide-dendron hybrids into cylindrical nanostructures. The bundle stoichiometry in the mesophase agrees well with the size found in solution for α-helical bundles of peptides with a similar amino acid sequence.

A novel self-assembled hybrid organogel of polypeptide-based block copolymers with inclusion of polypeptide-functionalized graphene

Self-assembled hybrid organogels of polypeptide-based BCPs with incorporation of functionalized graphene were generated, and showed enhanced mechanical performance for the potential nanomaterials application.

Self-Assembly of an α-Helical Peptide into a Crystalline Two-Dimensional Nanoporous Framework

Sequence-specific peptides have been demonstrated to self-assemble into structurally defined nanoscale objects including nanofibers, nanotubes, and nanosheets. The latter structures display significant promise for the construction of hybrid materials for functional devices due to their extended planar geometry. Realization of this objective necessitates the ability to control the structural features of the resultant assemblies through the peptide sequence. The design of a amphiphilic peptide, 3FD-IL, is described that comprises two repeats of a canonical 18 amino acid sequence associated with straight α-helical structures. Peptide 3FD-IL displays 3-fold screw symmetry in a helical conformation and self-assembles into nanosheets based on hexagonal packing of helices. Biophysical evidence from TEM, cryo-TEM, SAXS, AFM, and STEM measurements on the 3FD-IL nanosheets support a structural model based on a honeycomb lattice, in which the length of the peptide determines the thickness of the nanosheet and the packing of helices defines the presence of nanoscale channels that permeate the sheet. The honeycomb structure can be rationalized on the basis of geometrical packing frustration in which the channels occupy defect sites that define a periodic superlattice. The resultant 2D materials may have potential as materials for nanoscale transport and controlled release applications.

Template-Free Supracolloidal Self-Assembly of Atomically Precise Gold Nanoclusters: From 2D Colloidal Crystals to Spherical Capsids

We report supracolloidal self-assembly of atomically precise and strictly monodisperse gold nanoclusters involving p-mercaptobenzoic acid ligands (Au₁₀₂ -pMBA₄₄ ) under aqueous conditions into hexagonally packed monolayer-thick two-dimensional facetted colloidal crystals (thickness 2.7 nm) and their bending to closed shells leading to spherical capsids (d ca. 200 nm), as controlled by solvent conditions. The 2D colloidal assembly is driven in template-free manner by the spontaneous patchiness of the pMBA ligands around the Au₁₀₂ -pMBA₄₄ nanoclusters preferably towards equatorial plane, thus promoting inter-nanocluster hydrogen bonds and high packing to planar sheets. More generally, the findings encourage to explore atomically precise nanoclusters towards highly controlled colloidal self-assemblies.

Computationally designed peptides for self-assembly of nanostructured lattices

Folded peptides present complex exterior surfaces specified by their amino acid sequences, and the control of these surfaces offers high-precision routes to self-assembling materials. The complexity of peptide structure and the subtlety of noncovalent interactions make the design of predetermined nanostructures difficult. Computational methods can facilitate this design and are used here to determine 29-residue peptides that form tetrahelical bundles that, in turn, serve as building blocks for lattice-forming materials. Four distinct assemblies were engineered. Peptide bundle exterior amino acids were designed in the context of three different interbundle lattices in addition to one design to produce bundles isolated in solution. Solution assembly produced three different types of lattice-forming materials that exhibited varying degrees of agreement with the chosen lattices used in the design of each sequence. Transmission electron microscopy revealed the nanostructure of the sheetlike nanomaterials. In contrast, the peptide sequence designed to form isolated, soluble, tetrameric bundles remained dispersed and did not form any higher-order assembled nanostructure. Small-angle neutron scattering confirmed the formation of soluble bundles with the designed size. In the lattice-forming nanostructures, the solution assembly process is robust with respect to variation of solution conditions (pH and temperature) and covalent modification of the computationally designed peptides. Solution conditions can be used to control micrometer-scale morphology of the assemblies. The findings illustrate that, with careful control of molecular structure and solution conditions, a single peptide motif can be versatile enough to yield a wide range of self-assembled lattice morphologies across many length scales (1 to 1000 nm).

Hexagonal Lyotropic Liquid Crystal from Simple "Abiotic" Foldamers

The motivation of foldamer chemistry is to identify novel building blocks that have the potential to imitate natural species. Peptides and peptide mimetics can form stable helical conformations and further self-assemble into diverse aggregates in water, where it is difficult to isolate a single helix. In contrast, most "abiotic" foldamers may fold into helical structures in solution, but are difficult to assemble into tertiary ones. It remains a challenge to obtain "abiotic" species similar to peptides. In this paper, a novel foldamer scaffold, in which p-phenyleneethynylene units are linked by chiral carbon atoms, was designed and prepared. In very dilute solutions, these oligomers were random coils. The hexamer and octamers could form a hexagonal lyotropic liquid crystal (LC) in CH2Cl2 when the concentrations reached the critical values. The microscopic observations indicated that they could assemble into the nanofibers in the LC. Interestingly, after some LC phases were diluted at room temperature, the nanofibers could be preserved. The good stabilities of the assemblies are possibly attributed to a more compact backbone and more rigid side chains.

Disk-like micelles with cylindrical pores from amphiphilic polypeptide block copolymers

An unprecedented 2-dimensional disk-like micelle with cylindrical pores was achieved by self-assembly of amphiphilic block copolypeptides PEG-b-PBLG with an α-helical conformation of PBLG blocks.

Polypeptide vesicles with densely packed multilayer membranes

Multilamellar membranes are important building blocks for constructing self-assembled structures with improved barrier properties, such as multilamellar lipid vesicles. Polymeric vesicles (polymersomes) have attracted growing interest, but multilamellar polymersomes are much less explored. Here, we report the formation of polypeptide vesicles with unprecedented densely packed multilayer membrane structures with poly(ethylene glycol)-block-poly(γ-(4,5-dimethoxy-2-nitrobenzyl)-l-glutamate) (PEG-b-PL), an amphiphilic diblock rod-coil copolymer containing a short PEG block and a short hydrophobic rod-like polypeptide segment. The polypeptide rods undergo smectic ordering with PEG buried between the hydrophobic polypeptide layers. The size of both blocks and the rigidity of the hydrophobic polypeptide block are critical in determining the membrane structures. Increase of the PEG length in PEG-b-PL results in the formation of bilayer sheets, while using random-coil polypeptide block leads to the formation of large compound micelles. UV treatment causes ester bond cleavage of the polypeptide side chain, which induces helix-to-coil transition, change of copolymer amphiphilicity, and eventual disassembly of vesicles. These polypeptide vesicles with unique membrane structures provide a new insight into self-assembly structure control by precisely tuning the composition and conformation of polymeric amphiphiles.

Silica biomineralization via the self-assembly of helical biomolecules

The biomimetic synthesis of relevant silica materials using biological macromolecules as templates via silica biomineralization processes attract rapidly rising attention toward natural and artificial materials. Biomimetic synthesis studies are useful for improving the understanding of the formation mechanism of the hierarchical structures found in living organisms (such as diatoms and sponges) and for promoting significant developments in the biotechnology, nanotechnology and materials chemistry fields. Chirality is a ubiquitous phenomenon in nature and is an inherent feature of biomolecular components in organisms. Helical biomolecules, one of the most important types of chiral macromolecules, can self-assemble into multiple liquid-crystal structures and be used as biotemplates for silica biomineralization, which renders them particularly useful for fabricating complex silica materials under ambient conditions. Over the past two decades, many new silica materials with hierarchical structures and complex morphologies have been created using helical biomolecules. In this review, the developments in this field are described and the recent progress in silica biomineralization templating using several classes of helical biomolecules, including DNA, polypeptides, cellulose and rod-like viruses is summarized. Particular focus is placed on the formation mechanism of biomolecule-silica materials (BSMs) with hierarchical structures. Finally, current research challenges and future developments are discussed in the conclusion.

Thermotropic liquid crystals from biomacromolecules

Complexation of biomacromolecules (e.g., nucleic acids, proteins, or viruses) with surfactants containing flexible alkyl tails, followed by dehydration, is shown to be a simple generic method for the production of thermotropic liquid crystals. The anhydrous smectic phases that result exhibit biomacromolecular sublayers intercalated between aliphatic hydrocarbon sublayers at or near room temperature. Both this and low transition temperatures to other phases enable the study and application of thermotropic liquid crystal phase behavior without thermal degradation of the biomolecular components.

Designing protein-based biomaterials for medical applications

Biomaterials produced by nature have been honed through billions of years, evolving exquisitely precise structure-function relationships that scientists strive to emulate. Advances in genetic engineering have facilitated extensive investigations to determine how changes in even a single peptide within a protein sequence can produce biomaterials with unique thermal, mechanical and biological properties. Elastin, a naturally occurring protein polymer, serves as a model protein to determine the relationship between specific structural elements and desirable material characteristics. The modular, repetitive nature of the protein facilitates the formation of well-defined secondary structures with the ability to self-assemble into complex three-dimensional architectures on a variety of length scales. Furthermore, many opportunities exist to incorporate other protein-based motifs and inorganic materials into recombinant protein-based materials, extending the range and usefulness of these materials in potential biomedical applications. Elastin-like polypeptides (ELPs) can be assembled into 3-D architectures with precise control over payload encapsulation, mechanical and thermal properties, as well as unique functionalization opportunities through both genetic and enzymatic means. An overview of current protein-based materials, their properties and uses in biomedicine will be provided, with a focus on the advantages of ELPs. Applications of these biomaterials as imaging and therapeutic delivery agents will be discussed. Finally, broader implications and future directions of these materials as diagnostic and therapeutic systems will be explored.

Graphene-based materials functionalized with elastin-like polypeptides

Graphene-based materials commonly require functionalization for biological applications in order to control their physical/colloidal properties and to introduce additional capabilities, such as stimuli-responsiveness and affinity to specific biomolecules. Here, we functionalized CVD-grown graphene and graphene oxide with a genetically engineered elastin-like polypeptide fused to a graphene binding peptide and then showed that the resulting hybrid materials exhibit thermo- and photoresponsive behaviors. Furthermore, we demonstrate that our genetic engineering strategy allows for the facile introduction of bioactivity to reduced graphene oxide. The stimuli-responsiveness and genetic tunability of our graphene-protein nanocomposites are attractive for addressing future biomedical applications.

Amorphous and crystalline blends from polytyrosine and pyridine-functionalized anthracene: hydrogen-bond interactions, conformations, intramolecular charge transfer and aggregation-induced emission

A new pyridine-terminated fluorophore of (E)-4-(2-(anthracen-9-yl)vinyl)pyridine (AnPy) with intramolecular charge transfer and aggregation-induced emission properties was synthesized and was blended with polytyrosine (PTyr) through hydrogen-bond interactions.

Collective stringlike motion of semiflexible filamentous particles in columnar liquid crystalline phases

We study, by means of Brownian dynamics simulations, heterogeneous dynamics in a dense columnar phase of monodisperse hard filamentous particles, and find that in a background of barely moving particles, some particles occasionally engage in a fast coherent string-type motion similar to what is observed in glassy states of isometric particles. This fast motion is triggered by the exchange of particles between two or more columns at different positions in the columns, which leads to sudden displacement of particles between these positions. The distribution of particle displacements shows a pronounced peak at one particle length. We perform our simulations with particles of different persistence lengths and find that for more flexible particles, the number of jump events increases. As the number of particles in the columns increases with system size for a given linear fraction of particles in the columns, the peak in the distribution becomes wider and, for sufficiently large systems, the peak disappears completely. This is associated with the increase in the magnitude of fluctuations in the motion of particles as the system size increases. Our simulation results explain recent experimental observations on single-particle motion in dense columnar phases in aqueous dispersions of filamentous virus particles.

Light-controlled graphene-elastin composite hydrogel actuators

Hydrogels actuators (HAs) that can reversibly respond to stimuli have applications in diverse fields. However, faster response rates and improved control over actuation timing and location are required to fulfill their potential. To address these criteria, we synthesized near-infrared light-driven HAs by interfacing genetically engineered elastin-like polypeptides with reduced-graphene oxide sheets. The resulting nanocomposites exhibited rapid and tunable motions controlled by light position, intensity, and path, including finger-like flexing and crawling. This work demonstrates the ability of rationally designed proteins to be combined with synthetic nanoparticles for the creation of macroscale functional materials.

Electronic properties-morphology correlation of a rod-rod semiconducting liquid crystalline block copolymer containing poly(3-hexylthiophene)

The influence of the solvent and annealing temperature on the field-effect mobilities and morphologies of poly(3-hexylthiophene)-b-poly(γ-benzyl-L-glutamate) (P3HT-b-PBLG) rod-rod diblock copolymer has been investigated. Thin film X-ray diffraction studies show peaks originating from both P3HT and PBLG indicating that the crystalline nature of both the blocks is conserved after the formation of the block copolymer. It has been observed that the field-effect mobilities of the diblock copolymer are independent of the annealing temperatures for thin films deposited from both 1,2,4-trichlorobenzene and chloroform solvents. The correlation between the field-effect mobility and morphology indicates that the P3HT block self-assembles at the surface SiO(2) dielectric.

Designed ankyrin repeat proteins as scaffolds for multivalent recognition

Ankyrin repeat (AR) proteins are composed of tandem repeats of a basic structural motif of ca. 33 amino acid residues that form a β-turn followed by two antiparallel α-helices. Multiple repeats stack together in a modular fashion to form a scaffold that is ideally suited for the presentation of multiple functional groups and/or recognition elements. Here we describe a biosynthetic strategy that takes advantage of the modular nature of these proteins to generate multivalent ligands that are both chemically homogeneous and structurally well-defined. Glycosylated AR proteins cluster the tetrameric lectin concanavalin A (Con A) at a rate that is comparable to the rate of Con A aggregation mediated by globular protein conjugates and variable density linear polymers. Thus, AR proteins define a new class of multivalent ligand scaffolds that have significant potential application in the study and control of a variety of multivalent interactions.