Variable optofluidic slit aperture

Electromagnetically actuated 3D-printed tunable optical slit device

This paper presents the design, manufacturing, and characterization of a three-dimensional (3D)-printed and electromagnetically actuated adjustable optical slit structure. The device comprises magnet-attached slits connected to the main frame via two springs controlled by external coils. To analyze the forces acting on the springs and simulate the mechanical behavior of the device, we developed both analytical and finite-element models. After fabricating the device using fused deposition, we conducted a series of tests to evaluate its performance. These tests included (1) analyzing the opacity of the slit blade as a function of its thickness, (2) measuring the temperature increase resulting from the power applied to the coils to determine the operable range of the structure, and (3) evaluating the hysteresis, repeatability, and resolution (minimum step) of the device. The experimental works were crucial to assessing the device's practicality and optimizing its performance for specific applications, which reveals a maximum slit width of ∼450µm, with ∼6.4µm step size within this study. Overall, our developed slit device has the potential to be useful in various optics-related laboratories due to its compatibility with conventional 1-inch (25.4 mm) diameter optomechanical mounts, compact form, low power consumption, and rapid prototyping capability with hybrid materials in a cost-friendly fashion, owing to the 3D-printing technology. We discuss an application where the adjustable slit is employed in a combined laser-scanning microscope and a spectrometer, highlighting its versatility and potential for the future.

Adaptive aberration correction using an electrowetting array

We demonstrate a method that permits wavefront aberration correction using an array of electrowetting prisms. A fixed high fill factor microlens array followed by a lower fill factor adaptive electrowetting prism array is used to correct wavefront aberration. The design and simulation of such aberration correction mechanism is described. Our results show significant improvement to the Strehl ratio by using our aberration correction scheme which results in diffraction limited performance. Compactness and effectiveness of our design can be implemented in many applications that require aberration correction, such as microscopy and consumer electronics.

Digital optofluidic compound eyes with natural structures and zooming capability for large-area fluorescence sensing

Compound eyes are ubiquitous natural biosensors that possess high temporal resolution and large fields of view (FOVs). While for solid materials based artificial imaging systems, flexible zooming ability while keeping the constant FOV is still challenging, as well as the low-cost fabrication. Herein, liquid compound eyes with natural structures are presented that synthesize optofluidics and bionics in a non-trivial manner, which enables the deformation-free zooming and flexible cell fluorescence sensing. Experimental results indicate that the innovatively manufactured bionic template possesses low roughness and uniform lens configuration with more than two thousands units, which endows the eyes with high-quality and low aberration imaging ability. Besides, digital controlled miscible liquids switching enables the focus of ommatidia simultaneously be adjusted from 150 μm to 5 mm with 100° view angle, and without bending the microlens curvature, to avoid FOV changing and image aberration. Due to large FOV and tunable ability, large-area cell fluorescence signal arrays and dynamic cell motion are imaged using this liquid compound eyes. This work presents novel strategy for compound lens manufacture at low-cost, and proposes deformation-free and continuous focus-tuning strategy, offering potentials for numerous applications, including biomedical sensing and adaptive imaging with large FOV.

MEMS-based linear micromirror array with a high filling factor for spatial light modulation

A smart digital micromirror device (DMD) was employed to realize the on-chip scanning in versatile hyperspectral imaging (HSI) systems in our previous research. However, the rotation manner around the diagonal of the DMD makes the imaging subsystem and the spectral dispersion subsystem unable to be in the same horizontal surface. This leads to the difficulty in designing the opto-mechanical structures, system assembly and adjustment of the light path to a certain extent. On the other hand, the HSI system also needs a larger space to accommodate the two subsystems simultaneously since either of them has to incline against the horizontal surface. Moreover, there exists the interference of the reflected light between the adjacent micromirrors during the scanning process performed by the DMD, causing the loss of optical information about the object. Here, a novel linear micromirror array (MMA) based on the microelectromechanical system process that rotates around one lateral axis of the micromirror is developed, which is helpful to simplify the optical system of HSI and obtain more optical information about the detected target. The MMA has 32 independent linear micromirrors across an aperture of 5mm×6.5mm, under which there are dimple structures and a common bottom electrode. Finally, the MMA with a 98.6% filling factor is successfully fabricated by employing the bulk micromachining process. The experimental results show that the maximum rotational angle is 5.1° at a direct current driving voltage of 30 V. The proposed micromirror array is promising to replace the DMD and shows potential as a spatial light modulator in the fields of hyperspectral imaging, optical communication, and so on.

Accelerated electrowetting-based tunable fluidic lenses

One of the limitations in the application of electrowetting-based tunable fluidic lenses is their slow response time. We consider here two approaches for enhancing the response speed of tunable fluidic lenses: optimization of the properties of the fluids employed and modification of the time-dependent actuation voltages. Using a tubular optofluidic configuration, it is shown through simulations how one may take advantage of the interplay between liquid viscosities and surface tension to reduce the actuation time. In addition, by careful designing the actuation pulses, the response speed of both overdamped and underdamped systems may be increased by over an order of magnitude, leading to response times of several ten milliseconds. These performance improvements may significantly enhance the applicability of tunable optofluidic-based components and systems.

Bioinspired Zoom Compound Eyes Enable Variable-Focus Imaging

Natural compound eyes provide the inspiration for developing artificial optical devices that feature a large field of view (FOV). However, the imaging ability of artificial compound eyes is generally based on the large number of ommatidia. The lack of a tunable imaging mechanism significantly limits the practical applications of artificial compound eyes, for instance, distinguishing targets at different distances. Herein, we reported zoom compound eyes that enable variable-focus imaging by integrating a deformable poly(dimethylsiloxane) (PDMS) microlens array (MLA) with a microfluidic chamber. The thin and soft PDMS MLA was fabricated by soft lithography using a hard template prepared by a combined technology of femtosecond laser processing and wet etching. As compared with other mechanical machining strategies, our combined technology features high flexibility, efficiency, and uniformity, as well as designable processing capability, since the size, distribution, and arrangement of the ommatidia can be well controlled during femtosecond laser processing. By tuning the volume of water injected into the chamber, the PDMS MLA can deform from a planar structure to a hemispherical shape, evolving into a tunable compound eye of variable FOV up to 180°. More importantly, the tunable chamber can functionalize as the main zoom lens for tunable imaging, which endows the compound eye with the additional capability of distinguishing targets at different distances. Its focal length can be turned from 3.03 mm to infinity with an angular resolution of 3.86 × 10^-4 rad. This zoom compound eye combines the advantages of monocular eyes and compound eyes together, holding great promise for developing advanced micro-optical devices that enable large FOV and variable-focus imaging.

High extinction ratio, low insertion loss, optical switch based on an electrowetting prism

An optical switch based on an electrowetting prism coupled to a multimode fiber has demonstrated a large extinction ratio with speeds up to 300 Hz. Electrowetting prisms provide a transmissive, low power, and compact alternative to conventional free-space optical switches, with no moving parts. The electrowetting prism performs beam steering of ±3^° with an extinction ratio of 47 dB between the ON and OFF states and has been experimentally demonstrated at scanning frequencies of 100-300 Hz. The optical design is modeled in Zemax to account for secondary rays created at each surface interface (without scattering). Simulations predict 50 dB of extinction, in good agreement with experiment.

Holographic detection of nanoparticles using acoustically actuated nanolenses

The optical detection of nanoparticles, including viruses and bacteria, underpins many of the biological, physical and engineering sciences. However, due to their low inherent scattering, detection of these particles remains challenging, requiring complex instrumentation involving extensive sample preparation methods, especially when sensing is performed in liquid media. Here we present an easy-to-use, high-throughput, label-free and cost-effective method for detecting nanoparticles in low volumes of liquids (25 nL) on a disposable chip, using an acoustically actuated lens-free holographic system. By creating an ultrasonic standing wave in the liquid sample, placed on a low-cost glass chip, we cause deformations in a thin liquid layer (850 nm) containing the target nanoparticles (≥140 nm), resulting in the creation of localized lens-like liquid menisci. We also show that the same acoustic waves, used to create the nanolenses, can mitigate against non-specific, adventitious nanoparticle binding, without the need for complex surface chemistries acting as blocking agents.

Multifunction reflector controlled by liquid piston for optical switch and beam steering

This paper presents a multifunction reflector controlled by liquid piston for optical switch and beam steering. The multifunction reflector consists of two liquid cavities that are designed with microchannels. Two holes covered with elastic membranes are fabricated on the upper surface of the liquid cavities. When the liquid cavity is injected with liquid, the shape of the elastic membrane changes to form a liquid piston in the position of the holes accordingly. The magnetic base covered with a reflector is fixed on the surface. We can adjust the active number and height of the liquid pistons to drive the reflector deflecting to different directions. Our experiments show that the multifunction reflector can realize the function of 2×2 optical switch. It can also deflect the light beam through an angle of 0°∼72° in two directions. The multifunction reflector has potential applications of free-space optical communications, laser detections and variable optical attenuators.

A New Self-Activated Micropumping Mechanism Capable of Continuous-Flow and Real-Time PCR Amplification Inside 3D Spiral Microreactor

A self-activated micropump which is capable of stable velocity transport for a liquid to flow a given distance inside a 3D microchannel has been a dream of microfluidic scientists for a long time. A new self-activated pumping mechanism has been proposed in this paper. It is different from the authors’ previous research which relied on the fluid resistance of a quartz capillary tube or end-blocked gas-permeable silicone or a polydimethylsiloxane (PDMS) wall to automate the flow. In this research, an end-open stretched Teflon tube was utilized for passive transport for the first time. A new fluid transmission mode was adopted with the assistance of a cheaper easily accessible oil mixture to achieve stable continuous flow. Finally, this novel micropump has been applied to real-time continuous-flow polymerase chain reactions (PCRs), with an amplification efficiency similar to that of a commercial PCR cycler instrument.

Modes and break periods of electrowetting liquid bridge

In this paper, we propose a microscale liquid oscillator using electrowetting-on-dielectric (EWOD). Specifically, a mesoscale liquid bridge (LB) between two horizontal surfaces with EWOD is considered. When EWOD is applied, the solid surface becomes more hydrophilic, and hence the contact angle (CA) is reduced. Following the activation of EWOD, the LB can remain connected or it can break into either symmetric or asymmetric shapes depending on the initial liquid volume and wettability of the two surfaces. The LB dynamics activated by EWOD is studied using the multibody dissipative particle dynamics (MDPD) method. Our numerical results show that the behavior of an LB under EWOD can be interpreted via three modes. In the first mode, the LB does not break after applying EWOD. In the second mode, the LB breaks and does not reform. The third mode happens when, depending on the interplay of the volume of the liquid and CA manipulation, the LB continuously breaks, recoils, and reforms. For asymmetric cases, it was observed that the LB may completely detach from one surface and may not reform. It was also observed that decreasing the wettability of a surface, for cases with a continuous breaking and reformation behavior, increases the connecting time interval and decreases the breaking time interval in one break-reform cycle. The results provided in this investigation facilitate fundamental understanding of LB dynamics and their application for the design of microscale liquid oscillators using EWOD.

DMD-based hyperspectral imaging system with tunable spatial and spectral resolution

Pushbroom hyperspectral imaging (HSI) has been used in many areas from air to land. However, its inherent operational drawback of the bulky slit leads to a limited field of view (FOV) and high energy consumption. Accordingly, a new and versatile HSI system is proposed by employing a smart digital micromirror device (DMD) to replace the mechanical scanning component. Moreover, tunable spatial and spectral resolution is implemented through adjusting the on-chip scanning linewidth and adopting the pixel fusion method, respectively. Meanwhile, three scanning modes including rough scanning, fine scanning, and regional scanning are achieved. These multiple choices increase the system's flexibility, universality, and intelligence, which is attractive for practically different applications, especially for military and remote sensing fields in need of a large FOV, and medical and food fields in need of tunable resolution for various samples.

A Novel Self-Activated Mechanism for Stable Liquid Transportation Capable of Continuous-Flow and Real-time Microfluidic PCRs

The self-activated micropump capable of velocity-stable transport for both single-phased plug and double-phased droplet through long flow distance inside 3D microchannel is one dream of microfluidic scientists. While several types of passive micropumps have been developed based on different actuation mechanisms, until today, it is still one bottleneck to realize such a satisfied self-activated micropump for the stable delivery of both single and double-phased liquid inside long microchannel (e.g., several meters), due to the lack of innovative mechanism in previous methods. To solve this problem, in this article, we propose a new self-activated pumping mechanism. Herein, an end-opened gas-impermeable quartz capillary is utilized for passive transport. Mechanism of this micropump is systemically studied by both the mathematical modeling and the experimental verifications. Based on the flow assays, it totally confirmed a different pumping principle in this paper, as compared with our previous works. The R2 value of the overall flow rates inside the 3D microchannel is confirmed as high as 0.999, which is much more homogeneous than other passive pumping formats. Finally, this novel micropump is applied to continuous-flow real-time PCRs (both plug-type and microdroplet-type), with the amplification efficiency reaching 91.5% of the commercial PCR cycler instrument.

Lattice-Boltzmann Simulations of Electrowetting Phenomena

When a voltage difference is applied between a conducting liquid and a conducting (solid) electrode, the liquid is observed to spread on the solid. This phenomenon, generally referred to as electrowetting, underpins a number of interfacial phenomena of interest in applications that range from droplet microfluidics to optics. Here, we present a lattice-Boltzmann method that can simulate the coupled hydrodynamics and electrostatics equations of motion of a two-phase fluid as a means to model the electrowetting phenomena. Our method has the advantage of modeling the electrostatic fields within the lattice-Boltzmann algorithm itself, eliminating the need for a hybrid method. We validate our method by reproducing the static equilibrium configuration of a droplet subject to an applied voltage and show that the apparent contact angle of the drop depends on the voltage following the Young-Lippmann equation up to contact angles of ≈50°. At higher voltages, we observe a saturation of the contact angle caused by the competition between electric and capillary stresses, similar to previous experimental observations. We also study the stability of a dielectric film trapped between a conducting fluid and a solid electrode and find a good agreement with analytical predictions based on lubrication theory. Finally, we investigate the film dynamics at long times and report observations of film breakup and entrapment similar to previously reported experimental results.

An Oxide Schottky Junction Artificial Optoelectronic Synapse

The rapid development of artificial intelligence techniques and future advanced robot systems sparks emergent demand on the accurate perception and understanding of the external environments via visual sensing systems that can co-locate the self-adaptive detecting, processing, and memorizing of optical signals. In this contribution, a simple indium-tin oxide/Nb-doped SrTiO₃ (ITO/Nb:SrTiO₃) heterojunction artificial optoelectronic synapse is proposed and demonstrated. Through the light and electric field co-modulation of the Schottky barrier profile at the ITO/Nb:SrTiO₃ interface, the oxide heterojunction device can respond to the entire visible light region in a neuromorphic manner, allowing synaptic paired-pulse facilitation, short/long-term memory, and "learning-experience" behavior for optical information manipulation. More importantly, the photoplasticity of the artificial synapse has been modulated by heterosynaptic means with a sub-1 V external voltage, not only enabling an optoelectronic analog of the mechanical aperture device showing adaptive and stable optical perception capability under different illuminating conditions but also making the artificial synapse suitable for the mimicry of interest-modulated human visual memories.

Dual-mode pushbroom hyperspectral imaging using active system components and feed-forward compensation

Among the methods developed for hyperspectral imaging, pushbroom spatial scanning stands out when it comes to achieving high spectral resolution over a wide spectral range. However, conventional pushbroom systems are usually realized using passive system components, which has limited their flexibility and adaptability and narrowed their application scenarios. In this work, we adopt a different approach to the design and construction of pushbroom systems based on using active internal components. We present a new system concept utilizing an internal line scanning unit and a rotating camera mechanism. This enables a dual-mode imaging system that allows switching between 2D spatial imaging and spectral imaging. The line scanning unit, which consists of a narrow slit mounted to a linear piezo motor, facilitates the spatial scanning of the target while eliminating the laborious relative motion between the target and the imaging system, which is needed in conventional spectrographs. A software is developed for the automation and synchronization of the active components, which enables a novel feed-forward compensation function to compensate the shift in the diffraction angle due to the scanning motion of the slit and provide higher flexibility in data acquisition.

Self-Regulating Iris Based on Light-Actuated Liquid Crystal Elastomer

The iris, found in many animal species, is a biological tissue that can change the aperture (pupil) size to regulate light transmission into the eye in response to varying illumination conditions. The self-regulation of the eye lies behind its autofocusing ability and large dynamic range, rendering it the ultimate "imaging device" and a continuous source of inspiration in science. In optical imaging devices, adjustable apertures play a vital role as they control the light exposure, the depth of field, and optical aberrations of the systems. Tunable irises demonstrated to date require external control through mechanical actuation, and are not capable of autonomous action in response to changing light intensity without control circuitry. A self-regulating artificial iris would offer new opportunities for device automation and stabilization. Here, this paper reports the first iris-like, liquid crystal elastomer device that can perform automatic shape-adjustment by reacting to the incident light power density. Similar to natural iris, the device closes under increasing light intensity, and upon reaching the minimum pupil size, reduces the light transmission by a factor of seven. The light-responsive materials design, together with photoalignment-based control over the molecular orientation, provides a new approach to automatic, self-regulating optical systems based on soft smart materials.

Wide and fast focus-tunable dielectro-optofluidic lens via pinning of the interface of aqueous and dielectric liquids

Electrohydrodynamic actuation of dielectric liquid enables the development of an efficient focus-tunable dielectro-optofluidic lens (DOL) by manipulating a liquid-liquid interface. However, practical utilization of the previous DOL is hindered by its narrow and slow focus-tunability due to the direct movement of the interface. Here, we propose pinning the interface to directly change the interface shape while preventing the interface movement. The newly designed DOL exploits sudden changes in the channel diameter and the surface wettability to firmly pin the interface. Our results demonstrate that the tuning range of the DOL from -40 to +35 diopters is achieved in 0.1 s.

Recent Developments in Optofluidic Lens Technology

Optofluidics is a rapidly growing versatile branch of adaptive optics including a wide variety of applications such as tunable beam shaping tools, mirrors, apertures, and lenses. In this review, we focus on recent developments in optofluidic lenses, which arguably forms the most important part of optofluidics devices. We report first on a number of general characteristics and characterization methods for optofluidics lenses and their optical performance, including aberrations and their description in terms of Zernike polynomials. Subsequently, we discuss examples of actuation methods separately for spherical optofluidic lenses and for more recent tunable aspherical lenses. Advantages and disadvantages of various actuation schemes are presented, focusing in particular on electrowetting-driven lenses and pressure-driven liquid lenses that are covered by elastomeric sheets. We discuss in particular the opportunities for detailed aberration control by using either finely controlled electric fields or specifically designed elastomeric lenses.

Liquid Core ARROW Waveguides: A Promising Photonic Structure for Integrated Optofluidic Microsensors

In this paper, we introduce a liquid core antiresonant reflecting optical waveguide (ARROW) as a novel optofluidic device that can be used to create innovative and highly functional microsensors. Liquid core ARROWs, with their dual ability to guide the light and the fluids in the same microchannel, have shown great potential as an optofluidic tool for quantitative spectroscopic analysis. ARROWs feature a planar architecture and, hence, are particularly attractive for chip scale integrated system. Step by step, several improvements have been made in recent years towards the implementation of these waveguides in a complete on-chip system for highly-sensitive detection down to the single molecule level. We review applications of liquid ARROWs for fluids sensing and discuss recent results and trends in the developments and applications of liquid ARROW in biomedical and biochemical research. The results outlined show that the strong light matter interaction occurring in the optofluidic channel of an ARROW and the versatility offered by the fabrication methods makes these waveguides a very promising building block for optofluidic sensor development.