Electrically driven optical metamaterials

Bioinspired Structured Metal-Insulator-Metal Metamaterials with Gradient Resonator for High Efficiency and Solar Selective Absorption

Efficient utilization of solar energy is crucial in addressing energy challenges. Solar selective absorption materials, like metal-insulator-metal (MIM) absorbers, are highly efficient in converting solar energy to heat due to their strong solar absorption and minimal radiation loss. However, traditional planar MIM absorbers have narrow solar absorption bands and limited spectral tuning, restricting their practical use. Inspired by marine diatoms, this study designs and fabricates a structured MIM metamaterial (SMM) to achieve omnidirectional and polarization-insensitive selective absorption. The SMM features a concave-structured design with gradient resonance cavities, significantly expanding absorption across the solar spectrum and enabling tailored electromagnetic responses for selective absorption in different wavelength bands. With a thickness of just 180 nm, the SMM absorber shows outstanding selective absorption, reaching up to 91% absorptivity in the 0.3-2.5 µm and emissivity only 0.09 in the infrared range. The SMM absorber also exhibits size insensitivity, reducing design constraints in practical applications. In terms of photothermal conversion, the SMM absorber demonstrates stable performance, achieving a surface temperature of 165 °C under 3 sun illumination. Compared to planar MIM structures, this structured design significantly enhances solar absorption without affecting infrared emissivity, offering a novel approach to improving selective absorption performance.

Dynamic Compressive Behavior of a Novel Bioinspired Gradient Negative Poisson's Ratio Sign-Switching Metamaterial Made of Thermoplastic Polyurethane

Inspired by Scylla serrata, a novel thermoplastic polyurethane (TPU) negative Poisson's ratio sign-switching metamaterial is proposed, and the corresponding original and gradient structures (i.e., OPSM and GPSM) are created. Numerical simulation is utilized to simulate the quasi-static and dynamic compression behavior of the proposed structures considering the rate-dependent properties, elastoplastic response, and nonlinear contact. The neo-Hookean hyperelastic constitutive model and the Prony series are adopted to model the target structures. Finite element results are validated through experimental results. Parametric studies are conducted to study the effects of gradient characteristics and loading velocities on the mechanical behavior and Poisson's ratio of the structures. Testing results indicate that the proposed novel bioinspired structure patterns exhibit fascinating mechanical behavior and interesting negative Poisson's ratio sign-switching characteristics, which would provide the design guidance for the development and application of bioinspired structural materials.

Neural network properties of hydrophilic polymers as a key for development of the general theory of evolution

The analysis of the existing literature demonstrates that in order to address the fundamental challenges associated with the origin of life, it is essential to consider this problem from a comprehensive perspective, specifically from the vantage point of the general theory of evolution of complex systems. From these positions, life should be regarded as a distinctive instance of an information storage and processing system that emerges naturally. Evolutionary processes should be examined from the vantage point of the coevolution of material and informational components, which has not been sufficiently emphasized hitherto. It is shown that a specific example in this respect is analogues of neural networks spontaneously formed in solutions of some hydrophilic polymers. Such systems lead to the formation of non-trivial information objects. A wide range of other examples is considered, proving that the processes occurring with the participation of hydrophilic polymers should be interpreted, among other things, from the point of view of formation of information objects, which, under certain conditions, influence the processes occurring at the molecular and supramolecular level. It is shown that it is reasonable to use the tools of classical dialectics to solve such fundamental problems as that of the origin of life.

Micrometer-Resolution Fluorescence and Lifetime Mappings of CsPbBr3 Nanocrystal Films Coupled with a TiO2 Grating

Enhancing light emission from perovskite nanocrystal (NC) films is essential in light-emitting devices, as their conventional stacks often restrict the escape of emitted light. This work addresses this challenge by employing a TiO2 grating to enhance light extraction and shape the emission of CsPbBr3 nanocrystal films. Angle-resolved photoluminescence (PL) demonstrated a 10-fold increase in emission intensity by coupling the Bloch resonances of the grating with the spontaneous emission of the perovskite NCs. Fluorescence lifetime imaging microscopy (FLIM) provided micrometer-resolution mapping of both PL intensity and lifetime across a large area, revealing a decrease in PL lifetime from 8.2 ns for NC films on glass to 6.1 ns on the TiO2 grating. Back focal plane (BFP) spectroscopy confirmed how the Bloch resonances transformed the unpolarized, spatially incoherent emission of NCs into polarized and directed light. These findings provide further insights into the interactions between dielectric nanostructures and perovskite NC films, offering possible pathways for designing better performing perovskite optoelectronic devices.

Wide-incident-angle, polarization-independent broadband-absorption metastructure without external resistive elements by using a trapezoidal structure

The absorption of electromagnetic waves in a broadband frequency range with polarization insensitivity and incidence-angle independence is greatly needed in modern technology applications. Many structures based on metamaterials have been suggested for addressing these requirements; these structures were complex multilayer structures or used special materials or external electric components, such as resistive ones. In this paper, we present a metasurface structure that was fabricated simply by employing the standard printed-circuit-board technique but provides a high absorption above 90% in a broadband frequency range from 12.35 to 14.65 GHz. The metasurface consisted of structural unit cells of 4 symmetric substructures assembled with a metallic bar pattern, which induced broadband absorption by using a planar resistive interaction in the pattern without a real resistive component. The analysis, simulation, and measurement results showed that the metasurface was also polarization insensitive and still maintained an absorption above 90% at incident angles up to 45°. The suggested metasurface plays a role in the fundamental design and can also be used to design absorbers at different frequency ranges. Furthermore, further enhancement of the absorption performance is achieved by improved design and fabrication.

Spatial photoluminescence and lifetime mappings of quasi-2D perovskites coupled with a dielectric metasurface

Light-matter interaction between quantum emitters and optical cavities plays a vital role in fundamental quantum photonics and the development of optoelectronics. Resonant metasurfaces are proven to be an efficient platform for tailoring the spontaneous emission (SE) of the emitters. In this work, we study the interplay between quasi-2D perovskites and dielectric TiO2 metasurfaces. The metasurface, functioning as an open cavity, enhances electric fields near its plane, thereby influencing the emissions of the perovskite. This is verified through angle-resolved photoluminescence (PL) studies. We also conducted reflectivity measurements and numerical simulations to validate the coupling between the quasi-2D perovskites and photonic modes. Notably, our work introduces a spatial mapping approach to study Purcell enhancement. Using fluorescence lifetime imaging microscopy (FLIM), we directly link the PL and lifetimes of the quasi-2D perovskites in spatial distribution when positioned on the metasurface. This correlation provides unprecedented insights into emitter distribution and emitter-resonator interactions. The methodology opens a new (to the best of our knowledge) approach for studies in quantum optics, optoelectronics, and medical imaging by enabling spatial mapping of both PL intensity and lifetime, differentiating between uncoupled quantum emitters and those coupled with different types of resonators.

2D Silver-Nanoplatelets Metasurface for Bright Directional Photoluminescence, Designed with the Local Kirchhoff's Law

Semiconductor colloidal nanocrystals are excellent light emitters in terms of efficiency and spectral control. They can be integrated with a metasurface to make ultrathin photoluminescent devices with a reduced amount of active material and perform complex functionalities such as beam shaping or polarization control. To design such a metasurface, a quantitative model of the emitted power is needed. Here, we report the design, fabrication, and characterization of a ∼300 nm thick light-emitting device combining a plasmonic metasurface with an ensemble of nanoplatelets. The source has been designed with a methodology based on a local form of Kirchhoff's law. The source displays record high directionality and absorptivity.

Multiresonant Grating to Replace Transparent Conductive Oxide Electrode for Bias Selected Filtering of Infrared Photoresponse

Optoelectronic devices rely on conductive layers as electrodes, but they usually introduce optical losses that are detrimental to the device performances. While the use of transparent conductive oxides is established in the visible region, these materials show high losses at longer wavelengths. Here, we demonstrate a photodiode based on a metallic grating acting as an electrode. The grating generates a multiresonant photonic structure over the diode stack and allows strong broadband absorption. The obtained device achieves the highest performances reported so far for a midwave infrared nanocrystal-based detector, with external quantum efficiency above 90%, detectivity of 7 × 1011 Jones at 80 K at 5 μm, and a sub-100 ns time response. Furthermore, we demonstrate that combining different gratings with a single diode stack can generate a bias reconfigurable response and develop new functionalities such as band rejection.

Exploring Trimethyl-Phosphate-Based Electrolytes without a Carbonyl Group for Li-Rich Layered Oxide Positive Electrodes in Lithium-Ion Batteries

Li-rich layered oxides (LLOs) are one of the most attractive next-generation positive electrode materials as a result of their high energy density and low cost. However, the deterioration of cycling stability observed in LLOs remains one of the fundamental obstacles to commercialization. Carbonate-based electrolytes reacting with oxygen radicals evolved from the lattice of LLOs is the chief cause of their poor cyclability. Herein, we construct no carbonyl group, trimethyl phosphate (TMP)-based electrolytes with a fluorinated ether co-solvent and apply them to investigate the electrochemical behaviors of LLO batteries. These electrolytes can capture active oxygen species; the initial reversible capacity of cells reaches 295.5 mAh g^-1; and the capacity retention remains 96.7% after 100 cycles. In contrast, the capacity retention of cells using carbonate-based electrolytes is only 54.7% after 60 cycles. These results would provide the scientific basis and theoretical support for building electrolytes of LLOs with high properties in the future.

Anomalous Absorption in Arrays of Metallic Nanoparticles: A Powerful Tool for Quantum Dot Optoelectronics

Periodic arrays of noble metal nanoparticles are emblematic nanostructures in photonics. Their ability to sustain localized surface plasmon resonances has been used throughout the years to demonstrate a variety of passive and active functionalities such as enhanced luminescence in dipolar media and LEDs as well as higher responsivities in photoconductive detectors. Here, we show that additional magnetic resonances, associated with inductive current loops between the nanoparticles and accessible with transverse electric waves, emerge in the limit of dense arrays with subwavelength periods. Moreover, their interplay with the plasmons of the system results in spectrally sharp analogues of electromagnetically induced absorption (EIA). We use these metasurfaces to induce changes and enhancements in the emission, absorption, photoconduction, and polarization properties of active layers of PbS nanocrystals, illustrating the potential of EIA beyond the passive functionalities demonstrated so far in literature.

Bright CdSe/CdS Quantum Dot Light-Emitting Diodes with Modulated Carrier Dynamics via the Local Kirchhoff Law

Addressing the interactions between optical antennas and ensembles of emitters is particularly challenging. Charge transfer and Coulomb interactions complicate the understanding of the carrier dynamics coupled by antennas. Here, we show how Au antennas enhance the luminescence of CdSe/CdS quantum dot assemblies through carrier dynamics control within the framework of the local Kirchhoff law. The Au antennas inject hot electrons into quantum dot assemblies via plasmon-induced hot electron transfer that increases the carrier concentration. Also, the localized surface plasmon resonances of Au antennas favorably tilt the balance between nonradiative Auger processes and radiative recombination in the CdSe core. Eventually, a high bright (125,091.6 cd/m²) deep-red quantum dot light-emitting diode is obtained by combining with Au antennas. Our findings suggest a new understanding of light emission of assembled emitters coupled by antennas, which is of essential interest for the description of light-matter interaction in advanced optoelectronics.

Integration of Colloidal Quantum Dots with Photonic Structures for Optoelectronic and Optical Devices

Colloidal quantum dot (QD), a solution-processable nanoscale optoelectronic building block with well-controlled light absorption and emission properties, has emerged as a promising material system capable of interacting with various photonic structures. Integrated QD/photonic structures have been successfully realized in many optical and optoelectronic devices, enabling enhanced performance and/or new functionalities. In this review, the recent advances in this research area are summarized. In particular, the use of four typical photonic structures, namely, diffraction gratings, resonance cavities, plasmonic structures, and photonic crystals, in modulating the light absorption (e.g., for solar cells and photodetectors) or light emission (e.g., for color converters, lasers, and light emitting diodes) properties of QD-based devices is discussed. A brief overview of QD-based passive devices for on-chip photonic circuit integration is also presented to provide a holistic view on future opportunities for QD/photonic structure-integrated optoelectronic systems.

Optical-field driven charge-transfer modulations near composite nanostructures

Optical activation of material properties illustrates the potentials held by tuning light-matter interactions with impacts ranging from basic science to technological applications. Here, we demonstrate for the first time that composite nanostructures providing nonlocal environments can be engineered to optically trigger photoinduced charge-transfer-dynamic modulations in the solid state. The nanostructures explored herein lead to out-of-phase behavior between charge separation and recombination dynamics, along with linear charge-transfer-dynamic variations with the optical-field intensity. Using transient absorption spectroscopy, up to 270% increase in charge separation rate is obtained in organic semiconductor thin films. We provide evidence that composite nanostructures allow for surface photovoltages to be created, which kinetics vary with the composite architecture and last beyond optical pulse temporal characteristics. Furthermore, by generalizing Marcus theory framework, we explain why charge-transfer-dynamic modulations can only be unveiled when optic-field effects are enhanced by nonlocal image-dipole interactions. Our demonstration, that composite nanostructures can be designed to take advantage of optical fields for tuneable charge-transfer-dynamic remote actuators, opens the path for their use in practical applications ranging from photochemistry to optoelectronics.

Controlling and modulating charge transfer dynamics in composite nanostructures, though promising for optoelectronic applications, remains a challenge. Here, the authors report optical control of charge separation and recombination processes in organic semiconductor-based composite nanostructures.

Simultaneous Photonic and Excitonic Coupling in Spherical Quantum Dot Supercrystals

Semiconductor nanocrystals, or quantum dots (QDs), simultaneously benefit from inexpensive low-temperature solution processing and exciting photophysics, making them the ideal candidates for next-generation solar cells and photodetectors. While the working principles of these devices rely on light absorption, QDs intrinsically belong to the Rayleigh regime and display optical behavior limited to electric dipole resonances, resulting in low absorption efficiencies. Increasing the absorption efficiency of QDs, together with their electronic and excitonic coupling to enhance charge carrier mobility, is therefore of critical importance to enable practical applications. Here, we demonstrate a general and scalable approach to increase both light absorption and excitonic coupling of QDs by fabricating hierarchical metamaterials. We assemble QDs into crystalline supraparticles using an emulsion template and demonstrate that these colloidal supercrystals (SCs) exhibit extended resonant optical behavior resulting in an enhancement in absorption efficiency in the visible range of more than 2 orders of magnitude with respect to the case of dispersed QDs. This successful light trapping strategy is complemented by the enhanced excitonic coupling observed in ligand-exchanged SCs, experimentally demonstrated through ultrafast transient absorption spectroscopy and leading to the formation of a free biexciton system on sub-picosecond time scales. These results introduce a colloidal metamaterial designed by self-assembly from the bottom up, simultaneously featuring a combination of nanoscale and mesoscale properties leading to simultaneous photonic and excitonic coupling, therefore presenting the nanocrystal analogue of supramolecular structures.

Pushing Absorption of Perovskite Nanocrystals into the Infrared

To date, defect-tolerance electronic structure of lead halide perovskite nanocrystals is limited to an optical feature in the visible range. Here, we demonstrate that IR sensitization of formamidinium lead iodine (FAPI) nanocrystal array can be obtained by its doping with PbS nanocrystals. In this hybrid array, absorption comes from the PbS nanocrystals while transport is driven by the perovskite which reduces the dark current compared to pristine PbS. In addition, we fabricate a field-effect transistor using a high capacitance ionic glass made of hybrid FAPI/PbS nanocrystal arrays. We show that the hybrid material has an n-type nature with an electron mobility of 2 × 10^-3 cm² V^-1 s^-1. However, the dark current reduction is mostly balanced by a loss of absorption. To overcome this limitation, we couple the FAPI/PbS hybrid to a guided mode resonator that can enhance the infrared light absorption.

Spontaneous emission rate enhancement with aperiodic Thue-Morse multilayer

The emergence of multilayer metamaterials in the research field of enhancing spontaneous emission rates has recently received extensive attention. Previous research efforts mostly focus on periodic metal-dielectric multilayers in hyperbolic dispersion region; however, the influence of lattice order in subwavelength multilayers on spontaneous emission is rarely studied. Here, we observe the stronger Purcell enhancement of quantum dots coupled to the aperiodic metal-dielectric multilayer with Thue-Morse lattice order from elliptical to hyperbolic dispersion regions, compared to the periodic multilayer with the same metal filling ratio. This work demonstrates the potential of utilizing quasiperiodic metamaterial nanostructures to engineer the local density of states for various nanophotonic applications.

Road Map for Nanocrystal Based Infrared Photodetectors

Infrared (IR) sensors based on epitaxially grown semiconductors face two main challenges which are their prohibitive cost and the difficulty to rise the operating temperature. The quest for alternative technologies which will tackle these two difficulties requires the development of new IR active materials. Over the past decade, significant progresses have been achieved. In this perspective, we summarize the current state of the art relative to nanocrystal based IR sensing and stress the main materials, devices and industrial challenges which will have to be addressed over the 5 next years.