1
|
Lin J, Yu Z, Chen T, Huang J, Chen L, Li J, Li X, Huang X, Luo J, Ang EYM, Toh W, Wang PC, Ng TY, Seo DH, Zhao S, Zhong K, Xie M, Ye W, Van der Bruggen B, Wan Y. Sub-4 nanometer porous membrane enables highly efficient electrodialytic fractionation of dyes and inorganic salts. Nat Commun 2025; 16:3671. [PMID: 40246921 PMCID: PMC12006429 DOI: 10.1038/s41467-025-58873-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/06/2024] [Accepted: 04/03/2025] [Indexed: 04/19/2025] Open
Abstract
During the synthesis of dyes, desalination of high-salinity dye-containing waste liquor is a critical premise for high-quality, clean dye production. Conventional membrane processes, such as electrodialysis, nanofiltration and ultrafiltration, are inevitably subjected to serious membrane fouling, deteriorating the dye/salt fractionation efficacy. Integrating the technical merits of electrodialysis and pressure-driven membrane separation, we devise an electro-driven filtration process using a tight ultrafiltration membrane as alternative to conventional anion exchange membrane for rapid anion transfer, in view of dye desalination and purification. By employing a sub-4 nanometer tight ultrafiltration membrane as anion conducting membrane, the electro-driven filtration process achieves 98.15% desalination efficiency and 99.66% dye recovery for one-step fractionation of reactive dye and NaCl salt, markedly outperforming the system using commercial anion exchange membranes. Notably, the electro-driven filtration system displays a consistently high and stable fractionation performance for dyes and salts with unprecedentedly low membrane fouling through an eight-cycle continuous operation. Our results demonstrate that the electro-driven filtration process using nanoporous membranes as high-performance anion conducting membranes shows a critical potential in fractionation of organic dyes and inorganic salts, unlocking the proof of concept of nanoporous membranes in electro-driven application.
Collapse
Affiliation(s)
- Jiuyang Lin
- Jiangxi University of Science and Technology, Ganzhou, China
- Key Laboratory of Rare Earths, Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, China
- School of Environment and Safety Engineering, Fuzhou University, Fuzhou, China
| | - Zijian Yu
- School of Environment and Safety Engineering, Fuzhou University, Fuzhou, China
| | - Tianci Chen
- Key Laboratory of Rare Earths, Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, China
| | - Junming Huang
- School of Environment and Safety Engineering, Fuzhou University, Fuzhou, China
| | - Lianxin Chen
- School of Environment and Safety Engineering, Fuzhou University, Fuzhou, China
| | - Jiangjing Li
- School of Environment and Safety Engineering, Fuzhou University, Fuzhou, China
| | - Xuewei Li
- Key Laboratory of Rare Earths, Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, China
| | - Xiaolei Huang
- Key Laboratory of Rare Earths, Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, China
| | - Jianquan Luo
- State Key Laboratory of Biopharmaceutical Preparation and Delivery, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China
| | - Elisa Yun Mei Ang
- Engineering Cluster, Singapore Institute of Technology, Singapore, Singapore
| | - William Toh
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore
| | - Peng Cheng Wang
- Engineering Cluster, Singapore Institute of Technology, Singapore, Singapore
| | - Teng Yong Ng
- School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore
| | - Dong Han Seo
- Institute of Energy Materials & Devices, Korea Institute of Energy Technology (KENTECH), Naju, Republic of Korea
| | - Shuaifei Zhao
- Institute for Frontier Materials, Deakin University, Geelong, Victoria, Australia
| | - Kuo Zhong
- HuiKang Advanced Institute of Technology, Shenyang, China.
| | - Ming Xie
- Department of Chemical Engineering, University of Bath, Bath, United Kingdom.
| | - Wenyuan Ye
- Jiangxi University of Science and Technology, Ganzhou, China.
| | - Bart Van der Bruggen
- Department of Chemical Engineering, Process Engineering for Sustainable Systems (ProcESS), KU Leuven, Leuven, Belgium
- Faculty of Engineering and the Built Environment, Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, Pretoria, South Africa
| | - Yinhua Wan
- Key Laboratory of Rare Earths, Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, China.
| |
Collapse
|
2
|
Baoyu W, Shiyu Z, Zhe L, Cuiting D, Hao D, Yu Z, Rui D, Runnan Z, Sui Z, Zhongyi J. Noncovalent Complex Modulated Fabrication of COF Membrane for Organic Solvent Nanofiltration. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2025; 21:e2500927. [PMID: 40059478 DOI: 10.1002/smll.202500927] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/22/2025] [Revised: 02/23/2025] [Indexed: 04/25/2025]
Abstract
Covalent organic framework (COF) has been recognized as a disruptive material for fabricating organic molecular sieve membranes. Acquiring crystalline and defect-free COF membranes directly on polymeric substrates is important for practical applications yet is highly challenging. In this study, a noncovalent complex (NCX) modulated fabrication of COF membrane on hydrolyzed polyacrylonitrile (HPAN) substrate via counter diffusion is proposed. The triaminoguanidine chloride-phytic acid noncovalent complex (Tg-PA NCX) is uniformly introduced onto the HPAN substrate, transferring the substrate into an ideal seeding layer and catalytic platform for COF nucleation and growth. Enhanced Tg monomer concentration derived from NCX enhance its concentration near the surface is observed, facilitating the heterogeneous nucleation for COF fabrication. In addition, the PA in the NCX acted as a catalyst, promoting the growth of the highly crystalline COF membrane afterward. The resulting TgTb/NCX/HPAN membrane shows a defect-free surface with high crystallinity. Also, it displays over 90% rejection to various dyes rejection rates (e.g., Evans blue, Methyl blue, Congo red, and Amido Black) and high solvent permeation for organic solvents (e.g., ethanol: 57.9 ± 2.1 L m-2h-1 bar-1, n-hexane: 215.0 ± 2.7 L m-2h-1 bar-1). This work holds great potential as a platform technology for fabricating high-performance organic molecular sieve membranes.
Collapse
Affiliation(s)
- Wang Baoyu
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Zhang Shiyu
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Liu Zhe
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical, Engineering and Technology, Tianjin University, Tianjin, 300072, China
| | - Ding Cuiting
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical, Engineering and Technology, Tianjin University, Tianjin, 300072, China
| | - Deng Hao
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Zheng Yu
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical, Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Zhejiang Institute of Tianjin University, Ningbo, Zhejiang, 315201, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, China
| | - Ding Rui
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical, Engineering and Technology, Tianjin University, Tianjin, 300072, China
| | - Zhang Runnan
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical, Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Zhejiang Institute of Tianjin University, Ningbo, Zhejiang, 315201, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, China
| | - Zhang Sui
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Jiang Zhongyi
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, China
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical, Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Zhejiang Institute of Tianjin University, Ningbo, Zhejiang, 315201, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, China
| |
Collapse
|
3
|
Yao Z, Li C, Xia A, Zhang K, Wang Y, Yang L, Yu M, Wang D, Xiao W, Wang J. Construction of "organic-inorganic" hybrid structures via metal polyphenol networks: Mussel-inspired simple, green and efficient strategy to improve interfacial adhesion of composites. Int J Biol Macromol 2025; 302:140597. [PMID: 39904441 DOI: 10.1016/j.ijbiomac.2025.140597] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2024] [Revised: 01/19/2025] [Accepted: 01/31/2025] [Indexed: 02/06/2025]
Abstract
Traditional modifications of carbon fibers often suffer from high energy consumption, extensive use of chemical reagents, and potential damage to the intrinsic structure of the fibers. To address these issues, a mussel-inspired simple, green and efficient strategy was proposed. This strategy leverages π-π stacking and hydrogen bonding to facilitate the layer-by-layer self-assembly of metal polyphenol networks (MPN)‑carbon nanotubes (CNT) "organic-inorganic" hybrid structures onto the surface of carbon fibers. The process was conducted under mild conditions and avoids structural damage to the carbon fibers, requiring only straightforward procedures. Specifically, compared to unmodified carbon fiber composites, the interlaminar shear strength (ILSS), flexural strength, transverse fiber bundles tensile strength (TFBT) and interfacial shear strength (IFSS) of the CF/(MPN-CNT)1 composites were enhanced by 30.49 %, 49.90 %, 57.83 %, and 61.57 %, respectively. These enhancements are primarily due to the interphase induced by MPN-CNT hybrid structures, which increases the surface roughness and polarity of the carbon fibers, thereby mitigating the modulus mismatch between the fibers and the epoxy matrix. Overall, this work presents a non-covalent and innovative approach to interfacial modification, offering a promising pathway for developing advanced carbon fiber reinforced polymer composites with superior performance.
Collapse
Affiliation(s)
- Zhiqiang Yao
- School of Materials Science and Engineering, University of Jinan, Jinan, Shandong 250022, China
| | - Chengsen Li
- Beijing Institute of Aerospace Testing Technology, Beijing 100074, China
| | - Anqi Xia
- School of Materials Science and Engineering, University of Jinan, Jinan, Shandong 250022, China
| | - Kaining Zhang
- School of Materials Science and Engineering, University of Jinan, Jinan, Shandong 250022, China
| | - Yining Wang
- School of Materials Science and Engineering, University of Jinan, Jinan, Shandong 250022, China
| | - Lilin Yang
- School of Materials Science and Engineering, University of Jinan, Jinan, Shandong 250022, China
| | - Mingdong Yu
- School of Materials Science and Engineering, University of Jinan, Jinan, Shandong 250022, China
| | - Dongzhi Wang
- School of Materials Science and Engineering, University of Jinan, Jinan, Shandong 250022, China.
| | - Wengang Xiao
- Beijing Composite Materials Co., Ltd., Beijing 102101, China
| | - Jinna Wang
- Beijing Composite Materials Co., Ltd., Beijing 102101, China
| |
Collapse
|
4
|
Song Y, Zhang M, Chen Z, Jian M, Ling C, Zhang Q. Sustainable Pb(II) Removal and Recovery from Wastewater Using a Bioinspired Metal-Phenolic Hybrid Membrane with Efficient Regeneration. CHEMSUSCHEM 2025; 18:e202401770. [PMID: 39635921 DOI: 10.1002/cssc.202401770] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2024] [Revised: 11/16/2024] [Indexed: 12/07/2024]
Abstract
High-performance adsorbents often require efficient selectivity in wastewater, recoverability, and ease of multiple regeneration cycles, but achieving this remains a significant challenge. We report a new strategy for the efficient removal of lead (Pb(II)) from contaminated water streams using an innovative tannic acid (TA)-Fe(III)-based metal-phenolic network (MPN) hybrid membrane (MPN-PAM). This novel membrane exploits the tunable pH-sensitive coordination structure of the MPN to achieve selective removal and recovery of Pb(II) while enabling efficient membrane regeneration by filtration. This membrane demonstrates superior selectivity for Pb(II) with a removal efficiency of up to 98 % and an adsorption capacity of approximately 117.58 mg/g, even in the presence of high salinity, as well as coexisting heavy metals. The membrane maintains high Pb(II) removal efficiency over 20 consecutive cycles and 95 % efficiency over 10 regeneration cycles. Under continuous operation, it treats approximately 85 L per m2 of membrane, reducing Pb(II) concentrations to trace levels (~40 μg/L), meeting electroplating wastewater standard (GB21900-2008). Additionally, even low concentrations of Pb(II) (<5 mg/L) are efficiently purified to below WHO drinking water standard (10 μg/L). The operational cost for treating Pb(II)-contaminated wastewater is about $0.13 per ton, highlighting the cost-effectiveness and potential for large-scale application in wastewater treatment.
Collapse
Affiliation(s)
- Yaran Song
- State Key Laboratory of Metastable Materials Science and Technology, Hebei Key Laboratory of Heavy Metal Deep-remediation in Water and Resource Reuse, Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of Municipal Solid Waste, Yanshan University, Qinhuangdao, 066004, P. R. China
| | - Manyu Zhang
- State Key Laboratory of Metastable Materials Science and Technology, Hebei Key Laboratory of Heavy Metal Deep-remediation in Water and Resource Reuse, Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of Municipal Solid Waste, Yanshan University, Qinhuangdao, 066004, P. R. China
| | - Zichang Chen
- State Key Laboratory of Metastable Materials Science and Technology, Hebei Key Laboratory of Heavy Metal Deep-remediation in Water and Resource Reuse, Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of Municipal Solid Waste, Yanshan University, Qinhuangdao, 066004, P. R. China
| | - Meili Jian
- State Key Laboratory of Metastable Materials Science and Technology, Hebei Key Laboratory of Heavy Metal Deep-remediation in Water and Resource Reuse, Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of Municipal Solid Waste, Yanshan University, Qinhuangdao, 066004, P. R. China
| | - Chen Ling
- State Key Laboratory of Metastable Materials Science and Technology, Hebei Key Laboratory of Heavy Metal Deep-remediation in Water and Resource Reuse, Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of Municipal Solid Waste, Yanshan University, Qinhuangdao, 066004, P. R. China
| | - Qingrui Zhang
- State Key Laboratory of Metastable Materials Science and Technology, Hebei Key Laboratory of Heavy Metal Deep-remediation in Water and Resource Reuse, Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of Municipal Solid Waste, Yanshan University, Qinhuangdao, 066004, P. R. China
| |
Collapse
|
5
|
Hu Y, Ye Y, Wang J, Zhang T, Jiang S, Han X. Functionalization of chitosan and its application in flame retardants: A review. Int J Biol Macromol 2025; 295:139615. [PMID: 39788254 DOI: 10.1016/j.ijbiomac.2025.139615] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/01/2024] [Revised: 11/07/2024] [Accepted: 01/06/2025] [Indexed: 01/12/2025]
Abstract
In recent years, bio-based flame retardants have gained significant attention as sustainable alternatives, achieving important breakthroughs in flame retardancy and becoming a key focus for future development. Derived from biomass, chitosan (CS) has been widely used in the field of advanced functional materials. However, in the field of flame retardancy, chitosan alone shows limited effectiveness, leading researchers to explore its reactive functional groups for creating multifunctional flame retardant chitosan composites (FRCC). This review examines FRCC modifications, focusing on how physical and chemical techniques enhance flame retardancy based on combustion mechanisms. Particular emphasis is placed on the impact of embedding flame-retardant elements. Additionally, this paper outlines FRCC performance characteristics, addressing operational requirements in varied environments, and discusses key challenges. This study offers researchers a comprehensive overview of FRCC, serving as a valuable resource for ongoing research and development.
Collapse
Affiliation(s)
- Yudong Hu
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Yuhang Ye
- Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - Jiangbo Wang
- School of Materials and Chemical Engineering, Ningbo University of Technology, Ningbo 315211, China
| | - Ting Zhang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Shaohua Jiang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Xiaoshuai Han
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China.
| |
Collapse
|
6
|
Huang H, Xia J, Liu Y, Wang J, Chen X, Wang W, Lan Q, Zhang X, Lv Y, Liu T. Mineralized Nanofiber Substrates Enabling High-Performance Dually Charged Nanofiltration Membranes with Enhanced Permeability. ACS APPLIED MATERIALS & INTERFACES 2024; 16:68273-68284. [PMID: 39610255 DOI: 10.1021/acsami.4c13829] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/30/2024]
Abstract
Nanofiltration membranes (NFMs) with superior permeability and high rejection of both divalent anions and cations are highly desirable to meet the increasing separation demands of complex systems. Herein, we propose a three-in-one strategy to develop a state-of-the-art dually charged thin-film composite (TFC) nanofiltration membrane consisting of a positively charged electrospun nanofiber substrate (NFS) with surface mineralization and a negatively charged polyamide (PA) selective layer prepared by interfacial polymerization (IP). The highly hydrophilic mineralized nanofiber substrate not only effectively reduces the thickness of the PA selective layer but also crumples its structures by the abundant zirconia nanoparticles on the substrate surface, resulting in excellent water flux (15.0 L m-2 h-1 bar-1) for the TFC NFMs. The relationship between the thickness of the selective layer and substrate is further investigated using dissipative particle dynamics (DPD) simulations. Meanwhile, the dually charged NFM exhibits relatively high rejection for both anions (97.1% for Na2SO4 and 97.9% for MgSO4) and cations (87.9% for MgCl2) in aqueous solutions compared with single-charged membranes, which is attributed to the dual-repulsion effect of the selective layer and the substrate surface bearing opposite charges. Moreover, the prepared NFMs exhibit good stability and excellent antifouling performance. This work may pave the way for the development of highly efficient nanofiltration membranes for the practical separation of comprehensively charged solutes.
Collapse
Affiliation(s)
- HaiYan Huang
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - JingJing Xia
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - Ying Liu
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - JiaoJiao Wang
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - XueMin Chen
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - WenXu Wang
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - Qianqian Lan
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - Xu Zhang
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - Yan Lv
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| | - Tianxi Liu
- Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, P. R. China
| |
Collapse
|
7
|
Gan N, Lin Y, Wu B, Qiu Y, Sun H, Su J, Yu J, Lin Q, Matsuyama H. Supramolecular-coordinated nanofiltration membranes with quaternary-ammonium Cyclen for efficient lithium extraction from high magnesium/lithium ratio brine. WATER RESEARCH 2024; 268:122703. [PMID: 39492143 DOI: 10.1016/j.watres.2024.122703] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/27/2024] [Revised: 10/21/2024] [Accepted: 10/25/2024] [Indexed: 11/05/2024]
Abstract
Ion-selective membranes (ISM) with sub-nanosized pore channels hold significant potential for applications in saline wastewater treatment and resource recovery. Herein, novel synergistic ion channels featuring bi-periodic structures were constructed through the coordination of functional Cyclen (quaternary_1,4,7,10-tetraazacyclododecane, Q_Cyclen) and Cu2+-m-Phenylenediamine (Cu2+-MPD) to develop supramolecular membranes for lithium extraction. The exterior quaternary ammonium-rich sites exhibit a significant Donnan exclusion effect, resulting in tremendous mono/divalent (Li+/Mg2+) ion selectivity; while the interior regular-confined channels of Cyclen yield a fast vehicular pathway, facilitating water molecules and Li+ ion-selective transport. The optimized membrane exhibited an increased water permeance of 19.2 L·m-2·h-1·bar-1 and simultaneously promoted Li+/Mg2+ selectivity (achieving a selectivity of 18.5 under a Mg2+/Li+ mass ratio of 30), surpassing the trade-off limit of conventional nanofiltration membranes. Due to the acquired excellent Li+/Mg2+ selectivity, lithium extraction from simulated salt-lake brines was successfully achieved through a two-stage nanofiltration process, reducing the Mg2+/Li+ mass ratio from 40 to 1.1. This work validates the applicability of macrocyclic with intrinsic sub-nanosized channels and desired multifunctionality for developing high-performance ISM for efficient lithium separation and beyond.
Collapse
Affiliation(s)
- Ning Gan
- School of Chemistry and Chemical Engineering, Guizhou University, Guiyang 550025, Guizhou, China; School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Yuqing Lin
- School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China.
| | - Baolong Wu
- School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Yulong Qiu
- School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Haopan Sun
- School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Jingwen Su
- School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Jianguo Yu
- School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
| | - Qian Lin
- School of Chemistry and Chemical Engineering, Guizhou University, Guiyang 550025, Guizhou, China.
| | - Hideto Matsuyama
- Research Center for Membrane and Film Technology, Kobe University, Kobe 657-8501, Japan
| |
Collapse
|
8
|
Lee S, Yang J, Kim S, Kim DH, Kim JW. Controlled Sol-Gel Transitions of Metal-Organic Membrane-Enveloped Cellulose Nanofibrils via Metal Coordination in Aqueous Media. ACS APPLIED MATERIALS & INTERFACES 2024; 16:54782-54789. [PMID: 39345011 DOI: 10.1021/acsami.4c09284] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/01/2024]
Abstract
We report a metal coordination-driven sol-gel transition system where cellulose nanofibrils are enveloped by a rationally designed metal-organic membrane (MOM) in an aqueous medium. Specifically, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized bacterial cellulose (TOBC) is encapsulated within an MOM comprising Zn2+ and the chelator phytic acid (PA), denoted TOBCMOM. Using the DLVO theory, we elucidate how tuning the metal ion valence in TOBCMOM modulates the sol-gel transition by controlling interfibrillar attractive forces. Notably, TOBCMOM fluids exhibit relaxation times consistent with the Kohlrausch-Williams-Watts (KWW) function. Significantly, we demonstrate reversible, sustainable sol-gel transitions in TOBCMOM under stepwise mechanical strain. This facile approach enables rheological tailoring of aqueous media, promising for the development of advanced stimuli-responsive smart fluids for applications in cosmetics, food science, and pharmaceutical formulations.
Collapse
Affiliation(s)
- Seungjae Lee
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Jongryeol Yang
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Seulgi Kim
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Dong Han Kim
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Jin Woong Kim
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| |
Collapse
|
9
|
Zhu Z, Wang H, Ling C, Zhang Y, Zhao J, Wang Y, Zhao J, Pan F, Wang C, Jiang Z. Covalent Organic Framework Membranes from Oppositely Charged Nanosheets toward Efficient Desalination. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2401172. [PMID: 38552220 DOI: 10.1002/smll.202401172] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/14/2024] [Revised: 03/18/2024] [Indexed: 08/17/2024]
Abstract
Fabricating covalent organic framework (COF) membranes through the pre-assembly of nanosheets with different properties may open a novel avenue to the fabrication of advanced 2D membranes. Herein, COF membranes are fabricated using oppositely-charged COF nanosheets (CONs). Negatively-charged CONs and positively-charged CONs are pre-assembled through simple physical mixing, yielding the CONs with an aspect ratio of exceeding 10 000, which are assembled into three kinds of COF membranes. The optimal membranes exhibit the highest desalination performance with permeation flux of 132.66 kg m-2 h-1, salt rejection of 99.99%, and superior long-term operation stability.
Collapse
Affiliation(s)
- Ziting Zhu
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300072, China
| | - Hongjian Wang
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300072, China
- School of Chemistry and Chemical Engineering, Hainan University, Haikou, Hainan, 570228, China
| | - Cheng Ling
- Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, 201800, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Yue Zhang
- Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, 201800, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Jiashuai Zhao
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300072, China
| | - Yuhan Wang
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300072, China
| | - Junyi Zhao
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300072, China
| | - Fusheng Pan
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300072, China
- School of Chemistry and Chemical Engineering, Hainan University, Haikou, Hainan, 570228, China
| | - Chunlei Wang
- College of Sciences, Shanghai University, Shanghai, 200444, China
| | - Zhongyi Jiang
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300072, China
- School of Chemistry and Chemical Engineering, Hainan University, Haikou, Hainan, 570228, China
| |
Collapse
|
10
|
Chen Q, Tang Y, Ding YM, Jiang HY, Zhang ZB, Li WX, Liu ML, Sun SP. Synergistic Construction of Sub-Nanometer Channel Membranes through MOF-Polymer Composites: Strategies and Nanofiltration Applications. Polymers (Basel) 2024; 16:1653. [PMID: 38932003 PMCID: PMC11207757 DOI: 10.3390/polym16121653] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2024] [Revised: 06/06/2024] [Accepted: 06/07/2024] [Indexed: 06/28/2024] Open
Abstract
The selective separation of small molecules at the sub-nanometer scale has broad application prospects in the field, such as energy, catalysis, and separation. Conventional polymeric membrane materials (e.g., nanofiltration membranes) for sub-nanometer scale separations face challenges, such as inhomogeneous channel sizes and unstable pore structures. Combining polymers with metal-organic frameworks (MOFs), which possess uniform and intrinsic pore structures, may overcome this limitation. This combination has resulted in three distinct types of membranes: MOF polycrystalline membranes, mixed-matrix membranes (MMMs), and thin-film nanocomposite (TFN) membranes. However, their effectiveness is hindered by the limited regulation of the surface properties and growth of MOFs and their poor interfacial compatibility. The main issues in preparing MOF polycrystalline membranes are the uncontrollable growth of MOFs and the poor adhesion between MOFs and the substrate. Here, polymers could serve as a simple and precise tool for regulating the growth and surface functionalities of MOFs while enhancing their adhesion to the substrate. For MOF mixed-matrix membranes, the primary challenge is the poor interfacial compatibility between polymers and MOFs. Strategies for the mutual modification of MOFs and polymers to enhance their interfacial compatibility are introduced. For TFN membranes, the challenges include the difficulty in controlling the growth of the polymer selective layer and the performance limitations caused by the "trade-off" effect. MOFs can modulate the formation process of the polymer selective layer and establish transport channels within the polymer matrix to overcome the "trade-off" effect limitations. This review focuses on the mechanisms of synergistic construction of polymer-MOF membranes and their structure-nanofiltration performance relationships, which have not been sufficiently addressed in the past.
Collapse
Affiliation(s)
- Qian Chen
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
- Nanjing Membrane Materials Industrial Technology Research Institute Co., Ltd., Nanjing 211816, China
| | - Ying Tang
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Yang-Min Ding
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Hong-Ya Jiang
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Zi-Bo Zhang
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Wei-Xing Li
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Mei-Ling Liu
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
- Nanjing Membrane Materials Industrial Technology Research Institute Co., Ltd., Nanjing 211816, China
- NJTECH University Suzhou Future Membrane Technology Innovation Center, Suzhou 215100, China
| | - Shi-Peng Sun
- State Key Laboratory of Materials-Oriented Chemical Engineering, National Engineering Research Center for Special Separation Membranes, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
- Nanjing Membrane Materials Industrial Technology Research Institute Co., Ltd., Nanjing 211816, China
- NJTECH University Suzhou Future Membrane Technology Innovation Center, Suzhou 215100, China
| |
Collapse
|
11
|
Xu D, Xie Y, Jin X, Zheng J, Gao Q, Jin P, Zhu X, Zhang Z, Li X, Li G, Liang H, Van der Bruggen B. Polyphenol-mediated defect patching of graphene oxide membranes for sulfonamide contaminants removal and fouling control. JOURNAL OF HAZARDOUS MATERIALS 2024; 469:133890. [PMID: 38422736 DOI: 10.1016/j.jhazmat.2024.133890] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/17/2023] [Revised: 02/22/2024] [Accepted: 02/23/2024] [Indexed: 03/02/2024]
Abstract
Graphene oxide (GO)-based laminar membranes are promising candidates for next-generation nanofiltration membranes because of their theoretically frictionless nanochannels. However, nonuniform stacking during the filtration process and the inherent swelling of GO nanosheets generate horizontal and vertical defects, leading to a low selectivity and susceptibility to pore blockage. Herein, both types of defects are simultaneously patching by utilizing tannic acid and FeⅢ. Tannic acid first partially reduced the upper GO framework, and then coordinated with FeⅢ to form a metal-polyphenol network covering horizontal defects. Due to the enhanced steric hindrance, the resulting membrane exhibited a two-fold increase in sulfonamide contaminants exclusion compared to the pristine GO membrane. A non-significant reduction in permeance was observed. In terms of fouling control, shielding defects significantly alleviated the irreversible pore blockage of the membrane. Additionally, the hydrophilic metal-polyphenol network weakened the adhesion force between the membrane and foulants, thereby improving the reversibility of fouling in the cleaning stage. This work opens up a new way to develop GO-based membranes with enhanced separation performance and antifouling ability.
Collapse
Affiliation(s)
- Daliang Xu
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Yumeng Xie
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Xinyao Jin
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Junfeng Zheng
- Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, B-3001 Leuven, Belgium
| | - Qieyuan Gao
- Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, B-3001 Leuven, Belgium
| | - Pengrui Jin
- Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, B-3001 Leuven, Belgium
| | - Xuewu Zhu
- School of Municipal and Environmental Engineering, Shandong Jianzhu University, Jinan 250101, PR China
| | - Zifeng Zhang
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Xin Li
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Guibai Li
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Heng Liang
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, PR China.
| | - Bart Van der Bruggen
- Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, B-3001 Leuven, Belgium; Faculty of Engineering and the Built Environment, Tshwane University of Technology, Private Bag X680, Pretoria 0001, South Africa.
| |
Collapse
|
12
|
Jeon D, Seo B, Yang J, Shim WS, Kang NG, Park D, Kim JW. Substantial Confinement of Crystal Growth of Organic Crystalline Materials in Metal-Organic Membrane Microshells. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:8225-8232. [PMID: 38584357 DOI: 10.1021/acs.langmuir.4c00415] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/09/2024]
Abstract
This study proposes a robust microshell encapsulation system in which a metal-organic membrane (MOM), consisting of phytic acids (PAs) and metal ions, intrinsically prevents the molecular crystal growth of organic crystalline materials (OCMs). To develop this system, OCM-containing oil-in-water (O/W) Pickering emulsions were enveloped with the MOM, in which anionic pulp cellulose nanofiber (PCNF) primers electrostatically captured zinc ions at the O/W interface and chelated with PA, thus producing the MOM with a controlled shell thickness at the micron scale. We ascertained that the MOM formation fills and covers ∼75% of the surface pore size of PCNF films, which enhances the interfacial modulus by 2 orders of magnitude compared to that when treated with bare PCNFs. Through a feasibility test using a series of common OCMs, including ethylhexyl triazone, avobenzone, and ceramide, we demonstrated the excellent ability of our MOM microshell system to stably encapsulate OCMs while retaining their original molecular structures over time. These findings indicate that our MOM-reinforced microshell technology can be applied as a platform to substantially confine the crystal growth of various types of OCMs.
Collapse
Affiliation(s)
- Dongyoung Jeon
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Bokgi Seo
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Jongryeol Yang
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Woo Sun Shim
- R&D Campus, LG Household & Health Care, Seoul 07795, Republic of Korea
| | - Nae-Gyu Kang
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Daehwan Park
- Department of Chemical and Biomolecular Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
| | - Jin Woong Kim
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| |
Collapse
|
13
|
Chu G, Guan M, Jin J, Luo Y, Luo Z, Shi T, Liu T, Zhang C, Wang Y. Mechanochemically Reprogrammed Interface Orchestrates Neutrophil Bactericidal Activity and Apoptosis for Preventing Implant-Associated Infection. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2311855. [PMID: 38164817 DOI: 10.1002/adma.202311855] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/08/2023] [Revised: 12/13/2023] [Indexed: 01/03/2024]
Abstract
The onset of implant-associated infection (IAI) triggers a cascade of immune responses, which are initially dominated by neutrophils. Bacterial aggregate formation and hypoxic microenvironment, which occur shortly after implantation, may be two major risk factors that impair neutrophil function and lead to IAI. Here, the implant surface with phytic acid-Zn2+ coordinated TiO2 nanopillar arrays (PA-Zn@TiNPs) and oxygen self-supporting CaO2 nanoparticles, named as CPZTs, is mechanochemically reprogrammed. The engineered CPZTs interface integrates multiple properties to inhibit the formation of nascent biofilm, encompassing antibacterial adhesion, mechanobactericidal effect, and chemobiocidal effect. Meanwhile, continuous oxygenation fuels the neutrophils with reactive oxygen species (ROS) for efficient bacterial elimination on the implant surface and inside the neutrophils. Furthermore, this surface modulation strategy accelerates neutrophil apoptosis and promotes M2 macrophage-mediated osteogenesis both in vitro and in a rat model of IAI. In conclusion, targeting neutrophils for immunomodulation is a practical and effective strategy to prevent IAI and promote bone-implant integration.
Collapse
Affiliation(s)
- Guangyu Chu
- Spine Lab, Department of Orthopedic Surgery, The First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, 310003, China
| | - Ming Guan
- Spine Lab, Department of Orthopedic Surgery, The First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, 310003, China
| | - Jiale Jin
- Spine Lab, Department of Orthopedic Surgery, The First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, 310003, China
| | - Yao Luo
- Department of Orthopedics, The First Affiliated Hospital of USTC, Division of Life Sciences and Medicine, University of Science and Technology of China, Hefei, Anhui, 230001, China
| | - Zhiyuan Luo
- Department of Orthopedic Surgery, Shanghai Jiao Tong University Affiliated Sixth People's Hospital, Shanghai, 200233, China
| | - Tingwang Shi
- Department of Orthopedic Surgery, Shanghai Jiao Tong University Affiliated Sixth People's Hospital, Shanghai, 200233, China
| | - Tao Liu
- Spine Lab, Department of Orthopedic Surgery, The First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, 310003, China
| | - Chunlei Zhang
- Institute of Nano Biomedicine and Engineering, Shanghai Engineering Research Center for Intelligent Diagnosis and Treatment Instrument, School of Sensing Science and Engineering, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China
| | - Yue Wang
- Spine Lab, Department of Orthopedic Surgery, The First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, 310003, China
| |
Collapse
|
14
|
Liu SH, Zhou JH, Wu C, Zhang P, Cao X, Sun JK. Sub-8 nm networked cage nanofilm with tunable nanofluidic channels for adaptive sieving. Nat Commun 2024; 15:2478. [PMID: 38509092 PMCID: PMC10954766 DOI: 10.1038/s41467-024-46809-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2023] [Accepted: 03/08/2024] [Indexed: 03/22/2024] Open
Abstract
Biological cell membrane featuring smart mass-transport channels and sub-10 nm thickness was viewed as the benchmark inspiring the design of separation membranes; however, constructing highly connective and adaptive pore channels over large-area membranes less than 10 nm in thickness is still a huge challenge. Here, we report the design and fabrication of sub-8 nm networked cage nanofilms that comprise of tunable, responsive organic cage-based water channels via a free-interface-confined self-assembly and crosslinking strategy. These cage-bearing composite membranes display outstanding water permeability at the 10-5 cm2 s-1 scale, which is 1-2 orders of magnitude higher than that of traditional polymeric membranes. Furthermore, the channel microenvironments including hydrophilicity and steric hindrance can be manipulated by a simple anion exchange strategy. In particular, through ionically associating light-responsive anions to cage windows, such 'smart' membrane can even perform graded molecular sieving. The emergence of these networked cage-nanofilms provides an avenue for developing bio-inspired ultrathin membranes toward smart separation.
Collapse
Affiliation(s)
- Si-Hua Liu
- MOE Key Laboratory of Cluster Science, Beijing Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing, 102488, PR China
| | - Jun-Hao Zhou
- MOE Key Laboratory of Cluster Science, Beijing Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing, 102488, PR China
| | - Chunrui Wu
- State Key Laboratory of Separation Membranes and Membrane Processes, School of Chemical Engineering and Technology, Tiangong University, Tianjin, 300387, PR China
| | - Peng Zhang
- Key Laboratory of Nuclear Analysis Techniques, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, 100049, PR China
| | - Xingzhong Cao
- Key Laboratory of Nuclear Analysis Techniques, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, 100049, PR China
| | - Jian-Ke Sun
- MOE Key Laboratory of Cluster Science, Beijing Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing, 102488, PR China.
| |
Collapse
|
15
|
Wang CY, Chang HE, Wang CY, Kurioka T, Chen CY, Mark Chang TF, Sone M, Hsu YJ. Manipulation of interfacial charge dynamics for metal-organic frameworks toward advanced photocatalytic applications. NANOSCALE ADVANCES 2024; 6:1039-1058. [PMID: 38356624 PMCID: PMC10866133 DOI: 10.1039/d3na00837a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/29/2023] [Accepted: 11/15/2023] [Indexed: 02/16/2024]
Abstract
Compared to other known materials, metal-organic frameworks (MOFs) have the highest surface area and the lowest densities; as a result, MOFs are advantageous in numerous technological applications, especially in the area of photocatalysis. Photocatalysis shows tantalizing potential to fulfill global energy demands, reduce greenhouse effects, and resolve environmental contamination problems. To exploit highly active photocatalysts, it is important to determine the fate of photoexcited charge carriers and identify the most decisive charge transfer pathway. Methods to modulate charge dynamics and manipulate carrier behaviors may pave a new avenue for the intelligent design of MOF-based photocatalysts for widespread applications. By summarizing the recent developments in the modulation of interfacial charge dynamics for MOF-based photocatalysts, this minireview can deliver inspiring insights to help researchers harness the merits of MOFs and create versatile photocatalytic systems.
Collapse
Affiliation(s)
- Chien-Yi Wang
- Department of Materials Science and Engineering, National Yang Ming Chiao Tung University Hsinchu 300093 Taiwan
| | - Huai-En Chang
- Department of Materials Science and Engineering, National Yang Ming Chiao Tung University Hsinchu 300093 Taiwan
| | - Cheng-Yu Wang
- Department of Materials Science and Engineering, National Yang Ming Chiao Tung University Hsinchu 300093 Taiwan
| | - Tomoyuki Kurioka
- Institute of Innovative Research, Tokyo Institute of Technology Kanagawa 226-8503 Japan
| | - Chun-Yi Chen
- Institute of Innovative Research, Tokyo Institute of Technology Kanagawa 226-8503 Japan
| | - Tso-Fu Mark Chang
- Institute of Innovative Research, Tokyo Institute of Technology Kanagawa 226-8503 Japan
| | - Masato Sone
- Institute of Innovative Research, Tokyo Institute of Technology Kanagawa 226-8503 Japan
| | - Yung-Jung Hsu
- Department of Materials Science and Engineering, National Yang Ming Chiao Tung University Hsinchu 300093 Taiwan
- Center for Emergent Functional Matter Science, National Yang Ming Chiao Tung University Hsinchu 300093 Taiwan
- International Research Frontiers Initiative, Institute of Innovative Research, Tokyo Institute of Technology Kanagawa 226-8503 Japan
| |
Collapse
|
16
|
Huang L, Ding L, Caro J, Wang H. MXene-based Membranes for Drinking Water Production. Angew Chem Int Ed Engl 2023; 62:e202311138. [PMID: 37615530 DOI: 10.1002/anie.202311138] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2023] [Revised: 08/24/2023] [Accepted: 08/24/2023] [Indexed: 08/25/2023]
Abstract
The soaring development of industry exacerbates the shortage of fresh water, making drinking water production an urgent demand. Membrane techniques feature the merits of high efficiency, low energy consumption, and easy operation, deemed as the most potential technology to purify water. Recently, a new type of two-dimensional materials, MXenes as the transition metal carbides or nitrides in the shape of nanosheets, have attracted enormous interest in water purification due to their extraordinary properties such as adjustable hydrophilicity, easy processibility, antifouling resistance, mechanical strength, and light-to-heat transformation capability. In pioneering studies, MXene-based membranes have been evaluated in the past decade for drinking water production including the separation of bacteria, dyes, salts, and heavy metals. This review focuses on the recent advancement of MXene-based membranes for drinking water production. A brief introduction of MXenes is given first, followed by descriptions of their unique properties. Then, the preparation methods of MXene membranes are summarized. The various applications of MXene membranes in water treatment and the corresponding separation mechanisms are discussed in detail. Finally, the challenges and prospects of MXene membranes are presented with the hope to provide insightful guidance on the future design and fabrication of high-performance MXene membranes.
Collapse
Affiliation(s)
- Lingzhi Huang
- Beijing Key Laboratory for Membrane Materials and Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, China
| | - Li Ding
- Beijing Key Laboratory for Membrane Materials and Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, China
| | - Jürgen Caro
- Institute of Physical Chemistry and Electrochemistry, Leibniz University Hannover, Callinstrasse 3A, 30167, Hannover, Germany
| | - Haihui Wang
- Beijing Key Laboratory for Membrane Materials and Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, China
| |
Collapse
|
17
|
Yan D, Chen Y, Liu J, Song J. Super-Fast Fog Collector Based on Self-Driven Jet of Mini Fog Droplets. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2301745. [PMID: 37156743 DOI: 10.1002/smll.202301745] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Revised: 04/25/2023] [Indexed: 05/10/2023]
Abstract
Freshwater scarcity crisis threatens human life and economic security. Collecting water from the fog seems to be an effective method to defuse this crisis. Nonetheless, the existing fog collection methods have the limitations of the low fog collection rate and efficiency because of their gravity-based droplet shedding. Here, the aforementioned limitations are resolved by proposing a new fog collection method based on the self-driven jet phenomenon of the mini fog droplets. A prototype fog collector (PFC) composed of a square container that is filled with water is first designed. Both sides of the PFC are superhydrophobic but covered with superhydrophilic pore array. The mini fog droplets touching the side wall are easily captured and spontaneously and rapidly penetrate into the pores to form jellyfish-like jets, which greatly increases the droplet shedding frequency, guaranteeing a higher fog collection rate and efficiency compared with the existing fog collection methods. Based on this, a more practical super-fast fog collector is finally successfully designed and fabricated which is assembled by several PFCs. This work is hoping to resolve the water crisis in some arid but foggy regions.
Collapse
Affiliation(s)
- Defeng Yan
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Yang Chen
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Jinming Liu
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Jinlong Song
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian, 116024, P. R. China
- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian, 116024, P. R. China
| |
Collapse
|
18
|
Li P, Li W, Huang Y, Huang Q, Li F, Tian S. Surface Engineering over Metal-Organic Framework Nanoarray to Realize Boosted and Sustained Urea Oxidation. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023:e2305585. [PMID: 37574265 DOI: 10.1002/smll.202305585] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/04/2023] [Revised: 07/31/2023] [Indexed: 08/15/2023]
Abstract
Facilitating C─N bond cleavage and promoting *COO desorption are essential yet challenging in urea oxidation reactions (UORs). Herein a novel interfacial coordination assembly protocol is established to modify the Co-phytate coordination complex on the Ni-based metal-organic framework (MOF) nanosheet array (CC/Ni-BDC@Co-PA) toward boosted and sustained UOR electrocatalysis. Comprehensive experimental and theoretical investigations unveil that surface Co-PA modification over Ni-BDC can manipulate the electronic state of Ni sites, and in situ evolved charge-redistributed surface can promote urea adsorption and the subsequent C─N bond cleavage. Impressively, Co-PA functionalization can impart a negatively charged catalyst surface with improved aerophobicity, not only weakening *COO adsorption and promoting CO2 departure, but also repelling CO3 2- approaching to deactivate Ni species, eventually alleviating CO2 poisoning and enhancing operational durability. Beyond that, improved hydrophilic and aerophobic characteristics would also contribute to better mass transfer kinetics. Consequently, CC/Ni-BDC@Co-PA exhibits prominent UOR performance with an ultralow potential of 1.300 V versus RHE to attain 10 mA cm-2 , a small Tafel slope of 45 mV dec-1 , and strong durability, comparable to the best Ni-based electrocatalysts documented thus far. This work affords a novel paradigm to construct MOF-based materials for promoted and sustained UOR catalysis through elegant surface engineering based on a metal-PA complex.
Collapse
Affiliation(s)
- Ping Li
- School of Environment Science and Engineering, Sun Yat-Sen (Zhongshan) University, Guangzhou, 510275, P. R. China
- Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou, 510275, P. R. China
| | - Wenqin Li
- School of Environment Science and Engineering, Sun Yat-Sen (Zhongshan) University, Guangzhou, 510275, P. R. China
- Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou, 510275, P. R. China
| | - Yuqi Huang
- School of Environment Science and Engineering, Sun Yat-Sen (Zhongshan) University, Guangzhou, 510275, P. R. China
- Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou, 510275, P. R. China
| | - Quhua Huang
- School of Environment Science and Engineering, Sun Yat-Sen (Zhongshan) University, Guangzhou, 510275, P. R. China
- Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou, 510275, P. R. China
| | - Fengli Li
- School of Environment Science and Engineering, Sun Yat-Sen (Zhongshan) University, Guangzhou, 510275, P. R. China
- Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou, 510275, P. R. China
| | - Shuanghong Tian
- School of Environment Science and Engineering, Sun Yat-Sen (Zhongshan) University, Guangzhou, 510275, P. R. China
- Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Guangzhou, 510275, P. R. China
| |
Collapse
|
19
|
Chen Z, Feng R, Wang W, Tu S, Hu Y, Wang X, Zhan R, Wang J, Zhao J, Liu S, Fu L, Sun Y. Reaction-passivation mechanism driven materials separation for recycling of spent lithium-ion batteries. Nat Commun 2023; 14:4648. [PMID: 37532688 PMCID: PMC10397256 DOI: 10.1038/s41467-023-40369-9] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2022] [Accepted: 07/26/2023] [Indexed: 08/04/2023] Open
Abstract
Development of effective recycling strategies for cathode materials in spent lithium-ion batteries are highly desirable but remain significant challenges, among which facile separation of Al foil and active material layer of cathode makes up the first important step. Here, we propose a reaction-passivation driven mechanism for facile separation of Al foil and active material layer. Experimentally, >99.9% separation efficiency for Al foil and LiNi0.55Co0.15Mn0.3O2 layer is realized for a 102 Ah spent cell within 5 mins, and ultrathin, dense aluminum-phytic acid complex layer is in-situ formed on Al foil immediately after its contact with phytic acid, which suppresses continuous Al corrosion. Besides, the dissolution of transitional metal from LiNi0.55Co0.15Mn0.3O2 is negligible and good structural integrity of LiNi0.55Co0.15Mn0.3O2 is well-maintained during the processing. This work demonstrates a feasible approach for Al foil-active material layer separation of cathode and can promote the green and energy-saving battery recycling towards practical applications.
Collapse
Affiliation(s)
- Zihe Chen
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Ruikang Feng
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Wenyu Wang
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Shuibin Tu
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yang Hu
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Xiancheng Wang
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Renming Zhan
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Jiao Wang
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | | | | | - Lin Fu
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China
| | - Yongming Sun
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China.
| |
Collapse
|
20
|
Meng QW, Wu S, Liu M, Guo Q, Xian W, Zuo X, Wang S, Yin H, Ma S, Sun Q. Guanidinium-based covalent organic framework membrane for single-acid recovery. SCIENCE ADVANCES 2023; 9:eadh0207. [PMID: 37343103 DOI: 10.1126/sciadv.adh0207] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2023] [Accepted: 05/17/2023] [Indexed: 06/23/2023]
Abstract
Acids are extensively used in contemporary industries. However, time-consuming and environmentally unfriendly processes hinder single-acid recovery from wastes containing various ionic species. Although membrane technology can overcome these challenges by efficiently extracting analytes of interest, the associated processes typically exhibit inadequate ion-specific selectivity. In this regard, we rationally designed a membrane with uniform angstrom-sized pore channels and built-in charge-assisted hydrogen bond donors that preferentially conducted HCl while exhibiting negligible conductance for other compounds. The selectivity originates from the size-screening ability of angstrom-sized channels between protons and other hydrated cations. The built-in charge-assisted hydrogen bond donor enables the screening of acids by exerting host-guest interactions to varying extents, thus acting as an anion filter. The resulting membrane exhibited exceptional permeation for protons over other cations and for Cl- over SO42- and HnPO4(3-n)- with selectivities up to 4334 and 183, respectively, demonstrating prospects for HCl extraction from waste streams. These findings will aid in designing advanced multifunctional membranes for sophisticated separation.
Collapse
Affiliation(s)
- Qing-Wei Meng
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| | - Shaochun Wu
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| | - Mingjie Liu
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
- Institute of Zhejiang University-Quzhou, Quzhou 324000, China
| | - Qing Guo
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| | - Weipeng Xian
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| | - Xiuhui Zuo
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| | - Sai Wang
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| | - Hong Yin
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| | - Shengqian Ma
- Department of Chemistry, University of North Texas, 1508 W Mulberry St, Denton, TX 76201, USA
| | - Qi Sun
- Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
| |
Collapse
|
21
|
Parbat D, Jana N, Dhar M, Manna U. Reactive Multilayer Coating As Versatile Nanoarchitectonics for Customizing Various Bioinspired Liquid Wettabilities. ACS APPLIED MATERIALS & INTERFACES 2023; 15:25232-25247. [PMID: 35730600 DOI: 10.1021/acsami.2c04759] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
In last few decades, multilayer coatings have achieved enormous attention owing to their unique ability to tune thickness, topography, and chemical composition for developing various functional materials. Such multilayer coatings were mostly and conventionally derived by following a simple layer-by-layer (LbL) deposition process through the strategic use of electrostatic interactions, hydrogen bonding, host-guest interactions, covalent bonding, etc. In the conventional design of multilayer coatings, the chemical composition and morphology of coatings are modulated during the process of multilayer constructions. In such an approach, the postmodulations of the porous multilayers with different and desired chemistries are challenging to achieve due to the lack of availability of readily and selectively reactive moieties. Recently, the design of readily and selectively reactive multilayer coatings (RMLCs) provided a facile basis for postmodulating the prepared coating with various desired chemistries. In fact, by taking advantage of the inherent ability of co-optimizing the topography and various chemistries in porous RMLCs, different durable bioinspired liquid wettabilities (i.e., superhydrophobicity, underwater superoleophobicity, underwater superoleophilicity, slippery property, etc.) were successfully derived. Such interfaces have enormous potential in various prospective applications. In this review, we intend to give an overview of the evolution of LbL multilayer coatings and their synthetic strategies and discuss the key advantages of porous RMLCs in terms of achieving and controlling wettability properties. Recent attempts toward various applications of such multilayer coatings that are strategically embedded with different desired liquid wettabilities will be emphasized.
Collapse
Affiliation(s)
- Dibyangana Parbat
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology─Guwahati, Kamrup, Assam 781039, India
| | - Nirban Jana
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology─Guwahati, Kamrup, Assam 781039, India
| | - Manideepa Dhar
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology─Guwahati, Kamrup, Assam 781039, India
| | - Uttam Manna
- Bio-Inspired Polymeric Materials Lab, Department of Chemistry, Indian Institute of Technology─Guwahati, Kamrup, Assam 781039, India
- Centre for Nanotechnology, Indian Institute of Technology─Guwahati, Kamrup, Assam 781039, India
- School of Health Science and Technology, Indian Institute of Technology─Guwahati, Kamrup, Assam 781039, India
| |
Collapse
|
22
|
Lu T, Han X, Wang H, Zhang Z, Lu S. Multi-functional bio-film based on sisal cellulose nanofibres and carboxymethyl chitosan with flame retardancy, water resistance, and self-cleaning for fire alarm sensors. Int J Biol Macromol 2023; 242:124740. [PMID: 37150370 DOI: 10.1016/j.ijbiomac.2023.124740] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2023] [Revised: 04/25/2023] [Accepted: 05/01/2023] [Indexed: 05/09/2023]
Abstract
Flexible and environmentally friendly bio-based films have attracted significant attention as next-generation fire-responsive sensors. However, the low structural stability, durability, and flame retardancy of pure bio-based films limit their application in outdoor and extreme environments. Here, we report the design of a sustainable bio-based composite film assembled from carboxymethyl-modified sisal fibre microcrystals (C-MSF), carboxymethyl chitosan (CMC), graphene nanosheets (GNs), phytic acid (PA), and trivalent iron ions (Fe3+). Cross-linking between Fe3+ and the C-MSF/CMC matrix and the formation of PA-Fe3+ complexes on the surface of the film imparted excellent mechanical properties, chemical stability, self-cleaning ability, and flame retardancy to the bio-film. Furthermore, the bio-film produced a reversible and sensitive response to temperature at 55.3-214.1 °C, and a fire alarm system made from the bio-film had a fire-response time of 4.6 s. In addition, the char layer of the bio-film retained a stable cyclic response to temperature, enabling it to serve as a fire resurgence sensor with a response time of 2.3 s and recovery time of 11.2 s. This work provides a simple pathway for the fabrication of self-cleaning, flame retardant, and water-resistant bio-films that can be assembled into fire alarm systems for the real-time monitoring of fire accidents and resurgence.
Collapse
Affiliation(s)
- Tianyun Lu
- Key Laboratory of Rubber-Plastics of Ministry of Education/Shandong Provincial Key Laboratory of Rubber, Plastics, School of Polymer Science and Engineering, Qingdao University of Science & Technology, Qingdao 266061, China; Key Laboratory of New Processing Technology for Nonferrous Metals and Materials, Ministry of Education, School of Material Science and Engineering, Guilin University of Technology, Guilin 541004, China
| | - Xiaokun Han
- Key Laboratory of Rubber-Plastics of Ministry of Education/Shandong Provincial Key Laboratory of Rubber, Plastics, School of Polymer Science and Engineering, Qingdao University of Science & Technology, Qingdao 266061, China
| | - He Wang
- Key Laboratory of Rubber-Plastics of Ministry of Education/Shandong Provincial Key Laboratory of Rubber, Plastics, School of Polymer Science and Engineering, Qingdao University of Science & Technology, Qingdao 266061, China.
| | - Zuocai Zhang
- Shenzhen Key Laboratory of Polymer Science and Technology, Guangdong Research Center for Interfacial Engineering of Functional Materials, College of Materials Science and Engineering, Shenzhen University, Shenzhen 518060, China.
| | - Shaorong Lu
- Key Laboratory of New Processing Technology for Nonferrous Metals and Materials, Ministry of Education, School of Material Science and Engineering, Guilin University of Technology, Guilin 541004, China.
| |
Collapse
|
23
|
Amino acid-based loose polyamide nanofiltration membrane with ultrahigh water permeance for efficient dye/salt separation. J Memb Sci 2023. [DOI: 10.1016/j.memsci.2023.121477] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/17/2023]
|
24
|
Kinfu HH, Rahman MM. Separation Performance of Membranes Containing Ultrathin Surface Coating of Metal-Polyphenol Network. MEMBRANES 2023; 13:membranes13050481. [PMID: 37233542 DOI: 10.3390/membranes13050481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/28/2023] [Revised: 04/25/2023] [Accepted: 04/27/2023] [Indexed: 05/27/2023]
Abstract
Metal-polyphenol networks (MPNs) are being used as versatile coatings for regulating membrane surface chemistry and for the formation of thin separation layers. The intrinsic nature of plant polyphenols and their coordination with transition metal ions provide a green synthesis procedure of thin films, which enhance membrane hydrophilicity and fouling resistance. MPNs have been used to fabricate tailorable coating layers for high-performance membranes desirable for a wide range of applications. Here, we present the recent progress of the use of MPNs in membrane materials and processes with a special focus on the important roles of tannic acid-metal ion (TA-Mn+) coordination for thin film formation. This review introduces the most recent advances in the fabrication techniques and the application areas of TA-Mn+ containing membranes. In addition, this paper outlines the latest research progress of the TA-metal ion containing membranes and summarizes the role of MPNs in membrane performance. The impact of fabrication parameters, as well as the stability of the synthesized films, is discussed. Finally, the remaining challenges that the field still faces and potential future opportunities are illustrated.
Collapse
Affiliation(s)
- Hluf Hailu Kinfu
- Helmholtz-Zentrum Hereon, Institute of Membrane Research, Max-Planck-Straße 1, 21502 Geesthacht, Germany
| | - Md Mushfequr Rahman
- Helmholtz-Zentrum Hereon, Institute of Membrane Research, Max-Planck-Straße 1, 21502 Geesthacht, Germany
| |
Collapse
|
25
|
Direct synthesis of amorphous coordination polymers and metal–organic frameworks. Nat Rev Chem 2023; 7:273-286. [PMID: 37117419 DOI: 10.1038/s41570-023-00474-1] [Citation(s) in RCA: 47] [Impact Index Per Article: 23.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 02/02/2023] [Indexed: 03/08/2023]
Abstract
Coordination polymers (CPs) and their subset, metal-organic frameworks (MOFs), can have porous structures and hybrid physicochemical properties that are useful for diverse applications. Although crystalline CPs and MOFs have received the most attention to date, their amorphous states are of growing interest as they can be directly synthesized under mild conditions. Directly synthesized amorphous CPs (aCPs) can be constructed from a wider range of metals and ligands than their crystalline and crystal-derived counterparts and demonstrate numerous unique material properties, such as higher mechanical robustness, increased stability and greater processability. This Review examines methods for the direct synthesis of aCPs and amorphous MOFs, as well as their properties and characterization routes, and offers a perspective on the opportunities for the widespread adoption of directly synthesized aCPs.
Collapse
|
26
|
Zhou Z, Lu TD, Sun SP, Wang Q. Roles and gains of coordination chemistry in nanofiltration membrane: A review. CHEMOSPHERE 2023; 318:137930. [PMID: 36693478 DOI: 10.1016/j.chemosphere.2023.137930] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Revised: 01/14/2023] [Accepted: 01/19/2023] [Indexed: 06/17/2023]
Abstract
The nanofiltration (NF) membranes with the specific separation accuracy for molecules with the size of 0.5-2 nm have been applied in various industries. However, the traditional polymeric NF membranes still face problems like the trade-off effect, organic solvent consumption, and weak durability in harsh conditions. The participation of coordination action or metal-organic coordination compounds (MOCs) brings the membrane with uniform pores, better antifouling properties, and high hydrophilicity. Some of the aqueous-phase reactions also help to introduce a green fabrication process to NF membranes. This review critically summarizes the recent research progress in coordination chemistry relevant NF membranes. The participation of coordination chemistry was classified by the various functions in NF membranes like additives, interlayers, selective layers, coating layers, and cross-linkers. Then, the effect and mechanism of the coordination chemistry on the performance of NF membranes are discussed in depth. Perspectives are given for the further promotion that coordination chemistry can make in NF processes. This review also provides comprehensive insight and constructive guidance on high-performance NF membranes with coordination chemistry.
Collapse
Affiliation(s)
- Zhengzhong Zhou
- National-Local Joint Engineering Research Center of Biomass Refining and High-Quality Utilization, Institute of Urban and Rural Mining, Changzhou University, Changzhou, 213164, China
| | - Tian-Dan Lu
- School of Petrochemical Engineering, Changzhou University, Changzhou, 213164, China
| | - Shi-Peng Sun
- State Key Laboratory of Materials-Oriented Chemical Engineering, Jiangsu National Synergetic Innovation Center for Advanced Materials, College of Chemical Engineering, Nanjing Tech University, Nanjing, 211816, China
| | - Qian Wang
- National-Local Joint Engineering Research Center of Biomass Refining and High-Quality Utilization, Institute of Urban and Rural Mining, Changzhou University, Changzhou, 213164, China.
| |
Collapse
|
27
|
Du C, Yu T, Zhang L, Deng H, Shen R, Li X, Feng Y, Wang D. Macroscale Superlubricity with Ultralow Wear and Ultrashort Running-In Period (∼1 s) through Phytic Acid-Based Complex Green Liquid Lubricants. ACS APPLIED MATERIALS & INTERFACES 2023; 15:10302-10314. [PMID: 36755437 DOI: 10.1021/acsami.2c22402] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Liquid superlubricity has attracted much attention, due to its ability to significantly reduce friction on the macroscale. However, the severe wear caused by the long running-in period is still one of the bottlenecks restricting the practical application of liquid superlubricating materials. In this work, the obtained polyethylene glycol-phytic acid (PEG-PA) composite liquid lubricants showed outstanding superlubricating properties (μ ≈ 0.006) for Si3N4/glass friction pairs with an ultrashort running-in period (∼1 s) under high Hertzian contact pressure of ∼758 MPa. More importantly, even after up to 12 h (∼700 m of travel), only about 100 nm deep wear scars were found on the surface of the glass sheet (wear rate = 2.51× 10-9 mm3 N-1 m-1). From the molecular point of view, the water molecules anchored between the two friction pairs have extremely low shear force during the friction process, and the strong hydrogen bond interaction between PEG and PA greatly improves the bearing capacity of the lubricant. This work addresses the challenge of liquid superlubricant simultaneously exhibiting low shear force and high load-carrying capacity and makes it possible to obtain liquid superlubrication performance with an extremely short running-in time.
Collapse
Affiliation(s)
- Changhe Du
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Tongtong Yu
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
- Qingdao Center of Resource Chemistry and New Materials, Qingdao 266104, China
| | - Liqiang Zhang
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
- Qingdao Center of Resource Chemistry and New Materials, Qingdao 266104, China
| | - Haoyu Deng
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Ruilin Shen
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
| | - Xiaojuan Li
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Yange Feng
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
- Qingdao Center of Resource Chemistry and New Materials, Qingdao 266104, China
| | - Daoai Wang
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
- Qingdao Center of Resource Chemistry and New Materials, Qingdao 266104, China
| |
Collapse
|
28
|
Ge Y, Wang W, Li K, Xiao F, Yu Z, Gong J, Jin H, Li A. Anti-Oil-Adhesion Property of Superhydrophilic/Underwater Superoleophobic Phytic Acid-Fe III Complex Coatings. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:411-422. [PMID: 36534012 DOI: 10.1021/acs.langmuir.2c02619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Crude oil adhesion issues are widespread in the petroleum industry, leading to inefficient production and high maintenance costs. Developing efficient antifouling materials and investigating the microscopic adhesion mechanism are of substantial significance. In the present work, a superhydrophilic/underwater superoleophobic PAFC coating with excellent antifouling properties was constructed by the coordination-driven self-assembly of phytic acid (PA) and FeCl3 (FC). The atomic force microscope (AFM) droplet probe technique was employed to elucidate the underlying mechanism of the anti-oil-adhesion property of the PAFC coating. Results showed that the PAFC modification achieved the optimum effect at a molar ratio of 1:3 between PA and FeIII. Applying a (3-aminopropyl)triethoxysilane (APTES) interlayer can effectively improve the performance of the PAFC coating on silica substrates. AFM droplet probe experiments indicated that the adhesion force between submerged micrometer-sized oil droplets and PAFC-modified substrates was significantly weaker than that with the untreated substrate. Meanwhile, the adhesion forces between oil droplets and surfaces were inversely proportional to the contact angle of the oil in water and were enhanced by higher salinity, lower collision velocity, and stronger loading force. The oil injection and wall sticking tests also confirmed the effectiveness of the PAFC modification in resisting the adhesion of crude oil.
Collapse
Affiliation(s)
- Yuntong Ge
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
| | - Wei Wang
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
| | - Kai Li
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
| | - Fan Xiao
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
| | - Zhipeng Yu
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
| | - Jing Gong
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
| | - Hang Jin
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
- Tianjin Research Institute for Water Transport Engineering, Key Laboratory of Environmental Protection Technology on Water Transport, Ministry of Transport, Tianjin300456, P. R. China
| | - Ang Li
- Beijing Key Laboratory of Urban Oil and Gas Distribution Technology, State Key Laboratory of Natural Gas Hydrates, MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Beijing, Beijing102249, P. R. China
- China Huanqiu Contracting & Engineering Co., Ltd., Beijing100028, P. R. China
| |
Collapse
|
29
|
Zhou H, Dai R, Wang T, Wang Z. Enhancing Stability of Tannic Acid-Fe III Nanofiltration Membrane for Water Treatment: Intercoordination by Metal-Organic Framework. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2022; 56:17266-17277. [PMID: 36399419 DOI: 10.1021/acs.est.2c05048] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Tannic acid (TA)-FeIII nanofiltration (NF) membrane has been demonstrated to possess more favorable removal of trace organic contaminants (TrOCs) over the conventional polyamide NF membrane. However, the drawback of acid instability severely hinders the practical application of TA-FeIII NF membrane in the treatment of (weak) acidic wastewater containing TrOCs (e.g., pharmaceutical wastewater, surface water, and drinking water). Herein, we introduced the MIL-101(Cr) nanoparticle, a kind of metal-organic framework (MOF), into the TA-FeIII selective layer to enhance the membrane acid stability. The acid-tolerance parameter of MIL-101(Cr)-stabilized TA-FeIII membrane (TA-FeIII-MOF membrane, 12,000 ppm/s-1) was two orders of magnitude larger than that of the TA-FeIII membrane (50 ppm/s-1), and the TA-FeIII-MOF membrane can withstand acid treatment at pH = 4 for more than 30 days. Meanwhile, the TA-FeIII-MOF membrane displayed increased water permeance from 9.5 to 12.7 L/(m2·h·bar) after the MOF addition, without compromising the selectivity. The enhanced acid stability for the TA-FeIII-MOF membrane was ascribed to an intercoordination mechanism, where FeIII centers (from TA-FeIII complex) coordinated with -COOH groups (from terephthalic acid of MOF) and CrIII centers (from MOF) coordinated with -OH groups (from TA of TA-FeIII complex), which was verified by the density functional theory calculation. This study highlights a new approach for the development of a TA-FeIII-based NF membrane with markedly enhanced acid stability, which is important for its real application in wastewater treatment and water reuse.
Collapse
Affiliation(s)
- Huimin Zhou
- State Key Laboratory of Pollution Control and Resource Reuse, Shanghai Institute of Pollution Control and Ecological Security, School of Environmental Science and Engineering, Tongji University, Shanghai200092, China
| | - Ruobin Dai
- State Key Laboratory of Pollution Control and Resource Reuse, Shanghai Institute of Pollution Control and Ecological Security, School of Environmental Science and Engineering, Tongji University, Shanghai200092, China
| | - Tianlin Wang
- State Key Laboratory of Pollution Control and Resource Reuse, Shanghai Institute of Pollution Control and Ecological Security, School of Environmental Science and Engineering, Tongji University, Shanghai200092, China
| | - Zhiwei Wang
- State Key Laboratory of Pollution Control and Resource Reuse, Shanghai Institute of Pollution Control and Ecological Security, School of Environmental Science and Engineering, Tongji University, Shanghai200092, China
| |
Collapse
|
30
|
Yang C, Long M, Ding C, Zhang R, Zhang S, Yuan J, Zhi K, Yin Z, Zheng Y, Liu Y, Wu H, Jiang Z. Antifouling graphene oxide membranes for oil-water separation via hydrophobic chain engineering. Nat Commun 2022; 13:7334. [PMID: 36443300 PMCID: PMC9705527 DOI: 10.1038/s41467-022-35105-8] [Citation(s) in RCA: 45] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/05/2022] [Accepted: 11/17/2022] [Indexed: 11/29/2022] Open
Abstract
Engineering surface chemistry to precisely control interfacial interactions is crucial for fabricating superior antifouling coatings and separation membranes. Here, we present a hydrophobic chain engineering strategy to regulate membrane surface at a molecular scale. Hydrophilic phytic acid and hydrophobic perfluorocarboxylic acids are sequentially assembled on a graphene oxide membrane to form an amphiphilic surface. The surface energy is reduced by the introduction of the perfluoroalkyl chains while the surface hydration can be tuned by changing the hydrophobic chain length, thus synergistically optimizing both fouling-resistance and fouling-release properties. It is found that the surface hydration capacity changes nonlinearly as the perfluoroalkyl chain length increases from C4 to C10, reaching the highest at C6 as a result of the more uniform water orientation as demonstrated by molecular dynamics simulations. The as-prepared membrane exhibits superior antifouling efficacy (flux decline ratio <10%, flux recovery ratio ~100%) even at high permeance (~620 L m-2 h-1 bar-1) for oil-water separation.
Collapse
Affiliation(s)
- Chao Yang
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China
| | - Mengying Long
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China
| | - Cuiting Ding
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China
| | - Runnan Zhang
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China ,grid.33763.320000 0004 1761 2484Zhejiang Institute of Tianjin University, Ningbo, Zhejiang 315201 China ,Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192 China
| | - Shiyu Zhang
- grid.4280.e0000 0001 2180 6431Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207 China
| | - Jinqiu Yuan
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China
| | - Keda Zhi
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China
| | - Zhuoyu Yin
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China
| | - Yu Zheng
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China
| | - Yawei Liu
- grid.9227.e0000000119573309Beijing Key Laboratory of Ionic Liquids Clean Process, CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190 China
| | - Hong Wu
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China ,grid.33763.320000 0004 1761 2484Zhejiang Institute of Tianjin University, Ningbo, Zhejiang 315201 China ,Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192 China ,grid.33763.320000 0004 1761 2484Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin University, Tianjin, 300072 China
| | - Zhongyi Jiang
- grid.33763.320000 0004 1761 2484Key Laboratory for Green Chemical Technology, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072 China ,grid.33763.320000 0004 1761 2484Zhejiang Institute of Tianjin University, Ningbo, Zhejiang 315201 China ,Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192 China ,grid.4280.e0000 0001 2180 6431Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207 China
| |
Collapse
|
31
|
Wang H, Zhao J, Li Y, Cao Y, Zhu Z, Wang M, Zhang R, Pan F, Jiang Z. Aqueous Two-Phase Interfacial Assembly of COF Membranes for Water Desalination. NANO-MICRO LETTERS 2022; 14:216. [PMID: 36352333 PMCID: PMC9646690 DOI: 10.1007/s40820-022-00968-5] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/23/2022] [Accepted: 10/18/2022] [Indexed: 05/15/2023]
Abstract
Aqueous two-phase system features with ultralow interfacial tension and thick interfacial region, affording unique confined space for membrane assembly. Here, for the first time, an aqueous two-phase interfacial assembly method is proposed to fabricate covalent organic framework (COF) membranes. The aqueous solution containing polyethylene glycol and dextran undergoes segregated phase separation into two water-rich phases. By respectively distributing aldehyde and amine monomers into two aqueous phases, a series of COF membranes are fabricated at water-water interface. The resultant membranes exhibit high NaCl rejection of 93.0-93.6% and water permeance reaching 1.7-3.7 L m-2 h-1 bar-1, superior to most water desalination membranes. Interestingly, the interfacial tension is found to have pronounced effect on membrane structures. The appropriate interfacial tension range (0.1-1.0 mN m-1) leads to the tight and intact COF membranes. Furthermore, the method is extended to the fabrication of other COF and metal-organic polymer membranes. This work is the first exploitation of fabricating membranes in all-aqueous system, confering a green and generic method for advanced membrane manufacturing.
Collapse
Affiliation(s)
- Hongjian Wang
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China
| | - Jiashuai Zhao
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China
| | - Yang Li
- Department of Chemistry, Tianjin Key Laboratory of Molecular Optoelectronic Science, Tianjin University, Tianjin, 300072, People's Republic of China
| | - Yu Cao
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China
| | - Ziting Zhu
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China
| | - Meidi Wang
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China
| | - Runnan Zhang
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University Binhai New City, Fuzhou, 350207, People's Republic of China
| | - Fusheng Pan
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China.
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China.
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University Binhai New City, Fuzhou, 350207, People's Republic of China.
| | - Zhongyi Jiang
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, People's Republic of China.
- Haihe Laboratory of Sustainable Chemical Transformations, Tianjin, 300192, People's Republic of China.
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University Binhai New City, Fuzhou, 350207, People's Republic of China.
| |
Collapse
|
32
|
Zhang C, Chu G, Ruan Z, Tang N, Song C, Li Q, Zhou W, Jin J, Haick H, Chen Y, Cui D. Biomimetic Self-Assembling Metal-Organic Architectures with Non-Iridescent Structural Coloration for Synergetic Antibacterial and Osteogenic Activity of Implants. ACS NANO 2022; 16:16584-16597. [PMID: 36001338 DOI: 10.1021/acsnano.2c06030] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Materials in nature feature versatile and programmable interactions to render macroscopic architectures with multiscale structural arrangements. By rationally combining metal-carboxylate and metal-organophosphate coordination interactions, Au25(MHA)18 (MHA, 6-mercaptohexanoic acid) nanocluster self-assembled structural color coating films and phytic acid (PA)-metal coordination complexes are sequentially constructed on the surface of titanium implants. The Lewis acid-base coordination principle applies for these metal-organic coordination networks. The isotropic arrangement of nanoclusters with a short-range order is investigated via grazing incidence wide-angle X-ray scattering. The integration of robust M-O (M = Ti, Zr, Hf) and labile Cu-O coordination bonds with high connectivity of Au25(MHA)18 nanoclusters enables these artificial photonic structures to achieve a combination of mechanical stability and bacteriostatic activity. Moreover, the colorless and transparent PA-metal complex layer allows the viewing of the structural color and surface wettability switching to hydrophilic and makes feasible the interfacial biomineralization of hydroxyapatite. Collectively, these modular metal-organic coordination-driven assemblies are predictive and rational material design strategies with tunable hierarchy and diversity. The complete metal-organic architectures will not only help improve the physicochemical properties of the bone-implant interface with synergistic antibacterial and osseointegration activities but also can boost surface engineering of medical metal implants.
Collapse
Affiliation(s)
- Chunlei Zhang
- Institute of Nano Biomedicine and Engineering, Shanghai Engineering Research Center for Intelligent Diagnosis and Treatment Instrument, School of Sensing Science and Engineering, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China
| | - Guangyu Chu
- Department of Orthopedic Surgery, The First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, Zhejiang 310003, China
| | - Zesong Ruan
- Department of Orthopedic Surgery, Shanghai Jiao Tong University Affiliated Sixth People's Hospital, 600 Yishan Road, Shanghai 200233, China
| | - Ning Tang
- Institute of Nano Biomedicine and Engineering, Shanghai Engineering Research Center for Intelligent Diagnosis and Treatment Instrument, School of Sensing Science and Engineering, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China
| | - Cunfeng Song
- Institute of Nano Biomedicine and Engineering, Shanghai Engineering Research Center for Intelligent Diagnosis and Treatment Instrument, School of Sensing Science and Engineering, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China
| | - Qichao Li
- Institute of Nano Biomedicine and Engineering, Shanghai Engineering Research Center for Intelligent Diagnosis and Treatment Instrument, School of Sensing Science and Engineering, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China
| | - Wenjie Zhou
- Department of Second Dental Clinic, Ninth People's Hospital Affiliated with Shanghai Jiao Tong University School of Medicine, 280 Mohe Road, Shanghai 201999, China
| | - Jiale Jin
- Department of Orthopedic Surgery, The First Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou, Zhejiang 310003, China
| | - Hossam Haick
- Department of Chemical Engineering and Russell Berrie Nanotechnology, Institute Technion-Israel Institute of Technology, Haifa, 3200003, Israel
| | - Yunfeng Chen
- Department of Orthopedic Surgery, Shanghai Jiao Tong University Affiliated Sixth People's Hospital, 600 Yishan Road, Shanghai 200233, China
| | - Daxiang Cui
- Institute of Nano Biomedicine and Engineering, Shanghai Engineering Research Center for Intelligent Diagnosis and Treatment Instrument, School of Sensing Science and Engineering, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China
| |
Collapse
|
33
|
Said SM, Wang T, Feng YN, Ren Y, Zhao ZP. Recent Progress in Membrane Technologies Based on Metal–Phenolic Networks: A Review. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c02651] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Seleman Mahamoud Said
- Beijing Institute of Technology, School of Chemistry and Chemical Engineering, Beijing, 102488, P. R. China
- University of Dar es Salaam, College of Engineering and Technology, Department of Chemical and Process Engineering, P.O. Box 35131, Dar es Salaam, 16103, United Republic of Tanzania
| | - Tao Wang
- Beijing Institute of Technology, School of Chemistry and Chemical Engineering, Beijing, 102488, P. R. China
| | - Ying-Nan Feng
- Beijing Institute of Technology, School of Chemistry and Chemical Engineering, Beijing, 102488, P. R. China
| | - Yongsheng Ren
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, Department of Chemistry & Chemical Engineering, Ningxia University, Yinchuan, 750021, P. R. China
| | - Zhi-Ping Zhao
- Beijing Institute of Technology, School of Chemistry and Chemical Engineering, Beijing, 102488, P. R. China
| |
Collapse
|
34
|
Feng J, Lang G, Li T, Zhang J, Li T, Jiang Z. Enhanced removal performance of zero-valent iron towards heavy metal ions by assembling Fe-tannin coating. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 319:115619. [PMID: 35810583 DOI: 10.1016/j.jenvman.2022.115619] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/02/2022] [Revised: 06/03/2022] [Accepted: 06/22/2022] [Indexed: 06/15/2023]
Abstract
Heavy metals (HMs) pose serious threats to both human and environmental health and therefore, effective and low-cost techniques to remove HMs are urgently required. Here we report a facile Fe-tannin coating method for zero-valent iron (ZVI) including nanoparticles (nZVI) and foam (Fefoam), and demonstrate that the generated Fe-tannin coating would remove the inherent passive iron oxide shell of ZVI and provide channels for the galvanic replacement reaction between ZVI and HM ions. Electrochemical characterizations demonstrate that the Fe core of the modified ZVI materials could be easily oxidized and transfer electrons to HM ions owing to the facile mass transport and charge transfer. In 40 min, nZVI@Fe-TA exhibits excellent performances for Cd(II), Ni(II), Pb(II), Hg(II), Cu(II) and Cr(VI) removal, with the apparent removal rate constants of 0.083, 0.085, 0.083, 0.073, 0.092 and 0.078 min-1, respectively. It is found that the surface area normalized rate constants of nZVI@Fe-TA are 4-7 times higher than that of nZVI@Fe2O3 counterpart, suggesting that the improved HM removal reactivity of nZVI@Fe-TA is derived from the surface modification. Moreover, nZVI@Fe-TA has advantages in resisting interference and in the simultaneous removal of different HM ions. Under a 30 min hydraulic retention time, Fefoam@Fe-TA could remove 98% HMs in the successive process. For real electroplating wastewater, Fefoam@Fe-TA exhibits excellent performance for Cr(VI) and Ni(II) removal, producing effluent of stable quality that meets local emission regulation. This study provides a facile strategy to remove the inherent passive iron oxide shell and enhance the HM removal reactivity for ZVI materials.
Collapse
Affiliation(s)
- Jing Feng
- School of Science, Xihua University, Chengdu, 610039, China; Asymmetric Synthesis and Chiral Technology Key Laboratory of Sichuan Province, Xihua University, Chengdu, 610039, China; Research and Application of Small Organic Chiral Molecules Key Laboratory of Yibin City, Yibin Research Institute of Xihua University, Yibin, 644000, China.
| | - Gang Lang
- School of Science, Xihua University, Chengdu, 610039, China
| | - Tingting Li
- School of Science, Xihua University, Chengdu, 610039, China
| | - Jing Zhang
- School of Science, Xihua University, Chengdu, 610039, China
| | - Tengyue Li
- School of Science, Xihua University, Chengdu, 610039, China
| | - Zhenju Jiang
- School of Science, Xihua University, Chengdu, 610039, China; Asymmetric Synthesis and Chiral Technology Key Laboratory of Sichuan Province, Xihua University, Chengdu, 610039, China; Research and Application of Small Organic Chiral Molecules Key Laboratory of Yibin City, Yibin Research Institute of Xihua University, Yibin, 644000, China.
| |
Collapse
|
35
|
Zhao X, Wang X, Dong Y, Zhang H, Zhao W, Wang J, Wang L. New graphitic carbon nitride-based composite membranes: Fast water transport through the synergistic effect of tannic acid and tris(hydroxymethyl) aminomethane. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120736] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
36
|
Zhang Z, Liu C, Zhang H, Xu Z, Ju F, Yu C, Xu Y. Ultrafast Interfacial Self-Assembly toward Supramolecular Metal-Organic Films for Water Desalination. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2201624. [PMID: 35780496 PMCID: PMC9403643 DOI: 10.1002/advs.202201624] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/21/2022] [Revised: 05/27/2022] [Indexed: 06/15/2023]
Abstract
Supramolecular metal-organic materials are considered as the ideal candidates for membrane fabrication due to their excellent film forming characteristics, diverse metal centers and ligand sources, and designable structure and function. However, it remains challenging to rapidly construct highly permeable supramolecular metal-organic membranes with high salt rejection. Herein, a novel ultrafast interfacial self-assembly strategy to prepare supramolecular metal-organic films through the strong coordination interaction between highly active 1,3,5-triformylphloroglucinol (TFP) ligands and Fe3+ , Sc3+ , or Cu2+ at the organic-aqueous interface is reported. Benefiting from the self-completing and self-limiting characteristics of this interfacial self-assembly, the new kind of supramolecular membrane with optimized composition can be assembled within 3.5 min and exhibits ultrathin, dense, defect-free features, and thus shows an excellent water permeance (21.5 L m-2 h-1 bar-1 ) with a high Na2 SO4 rejection above 95%, which outperforms almost all of the non-polyamide membranes and commercially available nanofiltration membranes. This strong-coordination interfacial self-assembly method will open up a new way for the development of functional metal-organic supramolecular films for high-performance membrane separation and beyond.
Collapse
Affiliation(s)
- Zhao Zhang
- School of EngineeringWestlake University, Westlake Institute for Advanced Study18 Shilongshan RoadHangzhouZhejiang Province310024China
| | - Chang Liu
- MOE Key Laboratory of Macromolecular Synthesis and FunctionalizationKey Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang ProvinceDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou310027China
| | - Huilin Zhang
- School of EngineeringWestlake University, Westlake Institute for Advanced Study18 Shilongshan RoadHangzhouZhejiang Province310024China
| | - Zhi‐Kang Xu
- MOE Key Laboratory of Macromolecular Synthesis and FunctionalizationKey Laboratory of Adsorption and Separation Materials & Technologies of Zhejiang ProvinceDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou310027China
| | - Feng Ju
- School of EngineeringWestlake University, Westlake Institute for Advanced Study18 Shilongshan RoadHangzhouZhejiang Province310024China
- Key Laboratory of Coastal Environment and Resources of Zhejiang Province, School of EngineeringWestlake University18 Shilongshan RoadHangzhouZhejiang Province310024China
| | - Chengbing Yu
- School of Materials Science and EngineeringShanghai UniversityShanghai201800China
| | - Yuxi Xu
- School of EngineeringWestlake University, Westlake Institute for Advanced Study18 Shilongshan RoadHangzhouZhejiang Province310024China
| |
Collapse
|
37
|
Duceac IA, Tanasa F, Coseri S. Selective Oxidation of Cellulose-A Multitask Platform with Significant Environmental Impact. MATERIALS (BASEL, SWITZERLAND) 2022; 15:5076. [PMID: 35888547 PMCID: PMC9324530 DOI: 10.3390/ma15145076] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/23/2022] [Revised: 06/30/2022] [Accepted: 07/02/2022] [Indexed: 02/07/2023]
Abstract
Raw cellulose, or even agro-industrial waste, have been extensively used for environmental applications, namely industrial water decontamination, due to their effectiveness, availability, and low production cost. This was a response to the increasing societal demand for fresh water, which made the purification of wastewater one of the major research issue for both academic and industrial R&D communities. Cellulose has undergone various derivatization reactions in order to change the cellulose surface charge density, a prerequisite condition to delaminate fibers down to nanometric fibrils through a low-energy process, and to obtain products with various structures and properties able to undergo further processing. Selective oxidation of cellulose, one of the most important methods of chemical modification, turned out to be a multitask platform to obtain new high-performance, versatile, cellulose-based materials, with many other applications aside from the environmental ones: in biomedical engineering and healthcare, energy storage, barrier and sensing applications, food packaging, etc. Various methods of selective oxidation have been studied, but among these, (2,2,6,6-tetramethylpiperidin-1-yl)oxyl) (TEMPO)-mediated and periodate oxidation reactions have attracted more interest due to their enhanced regioselectivity, high yield and degree of substitution, mild conditions, and the possibility to further process the selectively oxidized cellulose into new materials with more complex formulations. This study systematically presents the main methods commonly used for the selective oxidation of cellulose and provides a survey of the most recent reports on the environmental applications of oxidized cellulose, such as the removal of heavy metals, dyes, and other organic pollutants from the wastewater.
Collapse
Affiliation(s)
| | - Fulga Tanasa
- Department of Polyaddition and Photochemistry, “Petru Poni” Institute of Macromolecular Chemistry, 700487 Iasi, Romania; (I.A.D.); (S.C.)
| | | |
Collapse
|
38
|
Guan K, Ushio K, Nakagawa K, Shintani T, Yoshioka T, Matsuoka A, Kamio E, Jin W, Matsuyama H. Integration of thin film composite graphene oxide membranes for solvent resistant nanofiltration. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120861] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/16/2022]
|
39
|
Metal-Phenolic Network-Functionalized Magnetic Nanoparticles for Enzyme Immobilization. Appl Biochem Biotechnol 2022; 194:5305-5321. [PMID: 35751761 DOI: 10.1007/s12010-022-04003-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/27/2022] [Indexed: 11/02/2022]
Abstract
Metal-phenolic network (MPN) coating is an emerging class of surface functionalization method and has attracted ever-growing interest in areas of bioengineering and biotechnology. Although various applications for MPN coatings, including drug delivery, cytoprotection, and antimicrobial surfaces, have been studied in the form of films and capsules, their interaction with enzyme molecules and the subsequent influence of biocatalytic properties are poorly understood. Herein, MPN coatings composed of different types of metal ions (CuII, FeIII, ZnII, MnII, AuIV) coordinated with tannic acid (TA) were fabricated on Fe3O4 nanoparticles as a facile nanoplatform for immobilizing alcohol dehydrogenase (ADH). The results show that the different polarization capacities of metal ions (i.e., Lewis acids) could affect the hydrophilicity and hydrophobicity of the coordinated MPN coatings, while the enzyme immobilization rate, biocatalytic activity, and stability are in turn influenced by the surface properties of the MPN coatings. Among the different metal ions, the Fe3O4-TA-ZnII showed the highest enzyme immobilizing efficiency (91.53%) and catalytic activity (60.45 U/mg ADH). Besides, the enzyme re-usability and tolerance to extreme conditions were both enhanced after immobilization. These results highlight an advanced strategy for the interfacial construction of hybrid heterogeneous biocatalytic systems with potential use in biomedical applications.
Collapse
|
40
|
Li B, You X, Wu H, Li R, Xiao K, Ren Y, Wang H, Song S, Wang Y, Pu Y, Huang X, Jiang Z. A facile metal ion pre-anchored strategy for fabrication of defect-free MOF membranes on polymeric substrates. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120419] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
|
41
|
Zhou Z, Zhou S, Cheng X, Liu W, Wu R, Wang J, Liu B, Zhu J, Van der Bruggen B, Zhang Y. Ultrathin polyamide membranes enabled by spin-coating assisted interfacial polymerization for high-flux nanofiltration. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2022.120648] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
42
|
Zhang S, Shen L, Deng H, Liu Q, You X, Yuan J, Jiang Z, Zhang S. Ultrathin Membranes for Separations: A New Era Driven by Advanced Nanotechnology. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2108457. [PMID: 35238090 DOI: 10.1002/adma.202108457] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2021] [Revised: 02/23/2022] [Indexed: 06/14/2023]
Abstract
Ultrathin membranes are at the forefront of membrane research, offering great opportunities in revolutionizing separations with ultrafast transport. Driven by advanced nanomaterials and manufacturing technology, tremendous progresses are made over the last 15 years in the fabrications and applications of sub-50 nm membranes. Here, an overview of state-of-the-art ultrathin membranes is first introduced, followed by a summary of the fabrication techniques with an emphasis on how to realize such extremely low thickness. Then, different types of ultrathin membranes, categorized based on their structures, that is, network, laminar, or framework structures, are discussed with a focus on the interplays among structure, fabrication methods, and separation performances. Recent research and development trends are highlighted. Meanwhile, the performances and applications of current ultrathin membranes for representative separations (gas separation and liquid separation) are thoroughly analyzed and compared. Last, the challenges in material design, structure construction, and coordination are given, in order to fully realize the potential of ultrathin membranes and facilitate the translation from scientific achievements to industrial productions.
Collapse
Affiliation(s)
- Shiyu Zhang
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Liang Shen
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Hao Deng
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| | - Qinze Liu
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
- School of Materials Science and Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, 250353, P. R. China
| | - Xinda You
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University, Tianjin, 300072, China
| | - Jinqiu Yuan
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University, Tianjin, 300072, China
| | - Zhongyi Jiang
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University, Tianjin, 300072, China
| | - Sui Zhang
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, P. R. China
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singapore
| |
Collapse
|
43
|
Ma H, Wang S, Ren Y, Liang X, Wang Y, Zhu Z, He G, Jiang Z. Microstructure Manipulation of Covalent Organic Frameworks (COFs)-based Membrane for Efficient Separations. Chem Res Chin Univ 2022. [DOI: 10.1007/s40242-022-1474-6] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
44
|
Bio-inspired mineral-hydrogel hybrid coating on hydrophobic PVDF membrane boosting oil/water emulsion separation. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2021.120383] [Citation(s) in RCA: 57] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
45
|
Zhang Z, Rahman MM, Bajer B, Scharnagl N, Abetz V. Highly selective isoporous block copolymer membranes with tunable polyelectrolyte brushes in soft nanochannels. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120266] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
46
|
Tiwari K, Modak S, Sarkar P, Ray S, Adupa V, Reddy KA, Pramanik SK, Das A, Karan S. Interfacial synthesis of large-area ultrathin polyimine nanofilms as molecular separation membrane. iScience 2022; 25:104027. [PMID: 35313692 PMCID: PMC8933715 DOI: 10.1016/j.isci.2022.104027] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2021] [Revised: 02/16/2022] [Accepted: 03/01/2022] [Indexed: 11/04/2022] Open
Abstract
Thin film membranes of covalent organic frameworks are promising for high-permeance molecular separation. However, their synthesis needs a high temperature or longer reaction time, unsuitable for large-scale fabrication of thin film composite membranes. The ultrathin film of porous organic polymers as a separation layer of the composite membrane could be a close alternative to COF membranes. Here we report transition metal ion-catalyzed room temperature fabrication of the ultrathin (≈12 nm) polyimine nanofilms via interfacial polymerization of melamine and triformylphloroglucinol onto hydrolyzed polyacrylonitrile support within a short reaction time. Composite membranes exhibit high water permeance (≈78 L m−2 h−1 bar−1), high rejection (99.6%) of brilliant blue R (825.9 g mol−1), low rejection of NaCl (≈1.8%) and Na2SO4 (≈17%), and enable efficient molecular separation. The role of metal ion catalysts for large-area fabrication of the ultrathin polyimine nanofilm membranes used for molecular separation is demonstrated. Ultrathin porous polyimine nanofilms could be a close alternative to COF membranes Large-area polyimine nanofilms are formed via interfacial polymerization Transition metal ions favor the formation of the nanofilms at room temperature Polyimine nanofilm membranes display superior permselectivity and tunable MWCO
Collapse
|
47
|
Tian J, Song B, Gao S, Van der Bruggen B, Zhang R. Omnifarious performance promotion of the TFC NF membrane prepared with hyperbranched polyester intervened interfacial polymerization. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2021.119984] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
48
|
Interfacial polymerization of thin film selective membrane layers: Effect of polyketone substrates. J Memb Sci 2021. [DOI: 10.1016/j.memsci.2021.119801] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
|
49
|
Liu L, Zuo X, He J, Zhou Y, Xiong J, Ma C, Chen Z, Yu S. Fabrication and characterization of 2-aminophenol-4-sulfonic acid-integrated polyamide loose nanofiltration membrane. J Memb Sci 2021. [DOI: 10.1016/j.memsci.2021.119867] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
|
50
|
Zhang F, Tan L, Gong L, Liu S, Fang W, Wang Z, Gao S, Jin J. Ionic strength directed self-assembled polyelectrolyte single-bilayer membrane for low-pressure nanofiltration. Front Chem Sci Eng 2021. [DOI: 10.1007/s11705-021-2093-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|