Single-molecule photoreaction quantitation through intraparticle-surface energy transfer (i-SET) spectroscopy

Bright upconversion over extended temperatures enabled by an organic surface layer

Lanthanide-doped nanocrystals are promising for photon frequency upconversion with substantial spectrum tunability. However, the utilization of the upconversion process has been constrained by low luminescence efficiency, which may further attenuate at elevated temperatures due to thermal quenching. Herein, we report a versatile strategy to boost upconversion luminescence across a wide temperature range by surface coordination of small organic molecules. Mechanistic investigations affirm that the organic surface layer passivates defects and isolates high-energy surface oscillators, thereby preventing the dissipation of excitation energy. The energy preserving effect becomes more prominent with increasing temperatures, especially in a humid environment. Accordingly, the upconversion emission of NaGdF4:Yb3+/Tm3+ nanocrystals is substantially enhanced in the ambient environment after ligand coordination, accompanied by an additional emission augmentation with increasing temperature to 443 K. By leveraging this anomalous optical response to thermal stimuli, we further establish full-color thermochromic upconversion switching for advanced anti-counterfeiting and logic encryption technologies.

Lanthanide-Doped Upconversion Nanoparticles for Single-Particle Imaging

Lanthanide-doped upconversion nanoparticles (UCNPs) have recently demonstrated great promise in single-particle imaging (SPI) due to their exceptional photostability and minimal background fluorescence. However, their limited brightness has posed a significant barrier to wider adoption in SPI applications. This review highlights recent advances in applying UCNPs for SPI, focusing on strategies to enhance their brightness and reduce quenching effects in aqueous environments. Additionally, it summarizes the latest progress in using UCNPs for single-particle tracking and super-resolution imaging, underscoring their potential in biomedical research. Finally, the review outlines current challenges and future directions in this field.

Anomalously Large Luminescence Modulation Induced by Trace Lanthanide Impurities in Alloyed Upconversion Nanocrystals

Achieving precise control over emission characteristics, such as wavelength and lifetime, is critical to unlocking the full potential of luminescent nanomaterials for diverse applications. In this work, we present a strategy for fine-tuning the optical properties of upconversion nanocrystals by engineering parts-per-million (ppm)-doping-level lanthanide impurities. We show that even trace impurities (∼10 ppm, fewer than 10 atoms per nanocrystal), which are only a hundredth of the conventionally studied doping levels and were previously considered negligible, serve as efficient energy traps in energy migration-based upconversion processes. By introducing controlled trapping centers via minimal impurity doping, we successfully regulate the upconversion emission colors and lifetimes with high precision. Moreover, we find that high-purity nanocrystals exhibit significantly greater lifetime changes in response to surface interactions, enabling an energy-transfer-based ultrasensitive spectrum and lifetime sensing. This approach facilitates the development of upconversion-based DNA sensors with detection limits over an order of magnitude lower than those of conventional methods, highlighting the potential of these nanocrystals as highly effective nanoprobes for interference-resistant biosensing in complex environments.

Lanthanide-Sensitized Upconversion Iridium Complex via Triplet Energy Transfer

Cyclometalated iridium (Ir) complexes demonstrate impressive capabilities across a range of fields, including biology and photocatalysis, due to their tunable optical characteristics and structure flexibility. However, generating upconversion luminescence of Ir complexes under near-infrared light excitation is challenging. Herein, by employing lanthanide-doped upconversion nanoparticles (UCNPs) as the sensitizer, a new strategy is demonstrated to gain upconversion luminescence of Ir complexes via triplet energy transfer. This design relies on a rationally designed hybrid of core-shell structured NaYbF4:Tb@NaTbF4 UCNPs and new Ir phosphonate complexes, in which UCNPs can migrate upconverted energy to the surface of nanoparticles through Tb3+-mediated energy migration and then sensitize the upconversion luminescence of Ir complexes upon 980 nm excitation. Both experimental and theoretical investigations highlight the significance of triplet energy transfer from excited Tb3+ ions to the triplet state of Ir complexes in the sensitization of upconversion luminescence of Ir complexes. These findings may open exciting avenues for fabricating hybrid Ir materials with new functions and driving the development of UCNP-based nanomaterials.

Preparation of NIR-II Polymer Nanoprobe Through Twisted Intramolecular Charge Transfer and Förster Resonance Energy Transfer of NIR-I Dye

Near-infrared-II (NIR-II) fluorescence imaging is pivotal in biomedical research. Organic probes exhibit high potential in clinical translation, due to advantages such as precise structure design, low toxicity, and post-modifications convenience. In related preparation, enhancement of NIR-II tail emission from NIR-I dyes is an efficient method. In particular, the promotion of twisted intramolecular charge transfer (TICT) of relevant NIR-I dyes is a convenient protocol. However, present TICT-type probes still show disadvantages in relatively low emission, large particle sizes, or limited choice of NIR-I dyes, etc. Herein, the synthesis of stable small-sized polymer NIR-II fluoroprobes (e.g., 7.2 nm), integrating TICT and Förster resonance energy transfer process to synergistically enhance the NIR-II emission is reported. Strong enhanced emissions can be obtained from various NIR-I dyes and lanthanide elements (e.g., twelvefold at 1250 nm from Nd-DTPA/IR-808 sample). The fluorophore provides high-resolution angiography, with high-contrast imaging on middle cerebral artery occlusion model mice for distinguishing occlusion. The fluorophore can be rapidly excreted from the kidney (urine ≈65% within 4 h) in normal mice and exhibits long-term renal retention on acute kidney injury mice, showing potential applications in the prognosis of kidney diseases. This development provides an effective strategy to design and synthesize effective NIR-II fluoroprobes.

Excitation power-dependent multicolor upconversion in NaLnF4:Er3+ under 1532 nm irradiation for anti-counterfeiting application

Upconversion (UC) materials are renowned for their ability to convert low-energy photons into high-energy ones. The manipulation of parameters allows for the observation of multicolored UC luminescence (UCL) within a single material system. While modulation of multicolored UCL commonly relies on excitation at approximately 980 nm, investigation into multicolored UC materials activated by a 1532 nm excitation source remains comparatively scarce. In this work, we introduce NaLnF4:Er3+ as a novel class of smart luminescent materials. When the power density of a 1532 nm laser increases from 0.5 to 20.0 W/cm2, the emission peak positions remain unchanged, but the red-to-green (R/G) ratio decreases significantly from 18.82 to 1.48, inducing a color shift from red to yellow and ultimately to green. In contrast, no color variation is observed when NaLnF4:Er3+ is excited with a 980 nm laser at different power densities. This power-dependent multicolored UCL of NaLnF4:Er3+ excited at 1532 nm can be attributed to the competitive processes of upward pumping and downward relaxation of electrons on the 4I9/2 level of Er3+. By utilizing the unique UC characteristics of NaLnF4:Er3+, its potential utility in anti-counterfeiting applications is demonstrated. Our research highlights the distinctive optical properties of NaLnF4:Er3+ and provides novel insights into the use of luminescent materials in optical anti-counterfeiting technologies.

Single-particle Förster resonance energy transfer from upconversion nanoparticles to organic dyes

Single-particle detection and sensing, powered by Förster resonance energy transfer (FRET), offers precise monitoring of molecular interactions and environmental stimuli at a nanometric resolution. Despite its potential, the widespread use of FRET has been curtailed by the rapid photobleaching of traditional fluorophores. This study presents a robust single-particle FRET platform utilizing upconversion nanoparticles (UCNPs), which stand out for their remarkable photostability, making them superior to conventional organic donors for energy transfer-based assays. Our comprehensive research demonstrates the influence of UCNPs' size, architecture, and dye selection on the efficiency of FRET. We discovered that small particles (∼14 nm) with a Yb3+-enriched outermost shell exhibit a significant boost in FRET efficiency, a benefit not observed in larger particles (∼25 nm). 25 nm UCNPs with an inert NaLuF4 shell demonstrated a comparable level of emission enhancement via FRET as those with a Yb3+-enriched outermost shell. At the single-particle level, these FRET-enhanced UCNPs manifested an upconversion green emission intensity that was 8.3 times greater than that of their unmodified counterparts, while maintaining notable luminescence stability. Our upconversion FRET system opens up new possibilities for developing more effective high-brightness, high-sensitivity single-particle detection, and sensing modalities.

Quantifying Förster Resonance Energy Transfer from Single Perovskite Quantum Dots to Organic Dyes

Colloidal quantum dots (QDs) are promising regenerable photoredox catalysts offering broadly tunable redox potentials along with high absorption coefficients. QDs have thus far been examined for various organic transformations, water splitting, and CO2 reduction. Vast opportunities emerge from coupling QDs with other homogeneous catalysts, such as transition metal complexes or organic dyes, into hybrid nanoassemblies exploiting energy transfer (ET), leveraging a large absorption cross-section of QDs and long-lived triplet states of cocatalysts. However, a thorough understanding and further engineering of the complex operational mechanisms of hybrid nanoassemblies require simultaneously controlling the surface chemistry of the QDs and probing dynamics at sufficient spatiotemporal resolution. Here, we probe the ET from single lead halide perovskite QDs, capped by alkylphospholipid ligands, to organic dye molecules employing single-particle photoluminescence spectroscopy with single-photon resolution. We identify a Förster-type ET by spatial, temporal, and photon-photon correlations in the QD and dye emission. Discrete quenching steps in the acceptor emission reveal stochastic photobleaching events of individual organic dyes, allowing a precise quantification of the transfer efficiency, which is >70% for QD-dye complexes with strong donor-acceptor spectral overlap. Our work explores the processes occurring at the QD/molecule interface and demonstrates the feasibility of sensitizing organic photocatalysts with QDs.

The effect of Er3+ concentration on the kinetics of multiband upconversion in NaYF4:Yb/Er microcrystals

In Yb-Er co-doped upconversion (UC) nanomaterials, upconversion luminescence (UCL) can be modulated to generate multiband UCL emissions by changing the concentration of activator Er³⁺. Nonetheless, the effect of the Er³⁺ concentrations on the kinetics of these emissions is still unknown. We here study the single β-NaYF₄:Yb³⁺/Er³⁺ microcrystal (MC) doped with different Er³⁺ concentrations by nanosecond time-resolved spectroscopy. Interestingly, different Er³⁺ doping concentrations exhibit different UCL emission bands and UCL response rates. At low Er³⁺ doping concentrations (1 mol%), multiband emission in β-NaYF₄:Yb³⁺/Er³⁺ (20/1 mol%) MCs could not be observed and the response rate of UCL was slow (5-10 μs) in β-NaYF₄:Yb³⁺/Er³⁺. Increasing the Er³⁺ doping concentration to 10 mol% can shorten the distance between Yb³⁺ ions and Er³⁺ ions, which promotes the energy transfer between them. β-NaYF₄:Yb³⁺/Er³⁺ (20/10 mol%) can achieve obvious multiband UCL and a quick response rate (0.3 µs). However, a further increase in the Er doping concentration (80 mol%) makes MCs limited by the CR process and cannot achieve the four-photon UC process (⁴F_5/2 → ²K_13/2 and ²H_9/2 → ²D_5/2). Therefore, the result shows that changing the Er³⁺ doping concentration could control the energy flow between the different energy levels in Er³⁺, which could affect the response time and UCL emission of the Yb/Er doped rare earth materials. Our work can facilitate the development of fast-response optoelectronics, optical-sensing, and display industries.

A dual-targeting near-infrared biomimetic drug delivery system for HBV treatment

Hepatitis B virus (HBV) infection is a serious global public health threat. It remains elusive to achieve a functional HBV cure with currently available antivirals. Herein, a photo-responsive delivery vehicle composed of Nd³⁺ -sensitized core-shell upconversion nanoparticle (UCNP), mesoporous silica nanoparticle (MSN), antisense oligonucleotides (ASOs), and capsid-binding inhibitor C39 was established, which was named UMAC according to the initials of its components. Subsequently, the as-synthesized delivery vehicle was encapsulated by β- D-galactopyranoside (Gal) modified red blood cell (RBC) membrane vesicles, which enabled precise targeting of the liver cells (UMAC-M-Gal). Both in vitro and in vivo experiments demonstrated that this biomimetic system could successfully achieve controlled drug release under light conditions at 808 nm, leading to effective suppression of HBV replication in this dual-targeted therapeutic approach. Together, these results substantiate the system has huge prospects for application to achieve functional HBV cure, and provides a promising novel strategy for drug delivery.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Upconversion FRET quantitation: the role of donor photoexcitation mode and compositional architecture on the decay and intensity based responses

Lanthanide-doped colloidal nanoparticles capable of photon upconversion (UC) offer long luminescence lifetimes, narrowband absorption and emission spectra, and efficient anti-Stokes emission. These features are highly advantageous for Förster Resonance Energy Transfer (FRET) based detection. Upconverting nanoparticles (UCNPs) as donors may solve the existing problems of molecular FRET systems, such as photobleaching and limitations in quantitative analysis, but these new labels also bring new challenges. Here we have studied the impact of the core-shell compositional architecture of upconverting nanoparticle donors and the mode of photoexcitation on the performance of UC-FRET from UCNPs to Rose Bengal (RB) molecular acceptor. We have quantitatively compared luminescence rise and decay kinetics of Er³⁺ emission using core-only NaYF₄: 20% Yb, 2% Er and core-shell NaYF₄: 20% Yb @ NaYF₄: 20% Yb, 5% Er donor UCNPs under three photoexcitation schemes: (1) direct short-pulse photoexcitation of Er³⁺ at 520 nm; indirect photoexcitation of Er³⁺ through Yb³⁺ sensitizer with (2) 980 nm short (5-7 ns) or (3) 980 nm long (4 ms) laser pulses. The donor luminescence kinetics and steady-state emission spectra differed between the UCNP architectures and excitation schemes. Aiming for highly sensitive kinetic upconversion FRET-based biomolecular assays, the experimental results underline the complexity of the excitation and energy-migration mechanisms affecting the Er³⁺ donor responses and suggest ways to optimize the photoexcitation scheme and the architecture of the UCNPs used as luminescent donors.

Deterministic Relation between Optical Polarization and Lattice Symmetry Revealed in Ion-Doped Single Microcrystals

Rare-earth ion doped crystals are of great significance for microsensing and quantum information, while the ions in the crystals emit light with spontaneous partial polarization, which is, though believed to be originated from the crystal lattice structure, still lacking a deterministic explanation that can be tested with quantitative accuracy. We report experimental evidence showing the profound physical relation between the polarization degree of light emitted by the doped ion and the lattice symmetry by demonstrating, with high precision, that the lattice constant ratio c/a directly quantifies the macroscopic effective polar angle of the electric and magnetic dipoles, which essentially determines the linear polarization degree of the emission. Based on this result, we further propose a pure optical technology to identify the three-dimensional orientation of a rod-shaped single microcrystal using the polarization-resolved microspectroscopy. Our results, demonstrating the physical origin of light polarization in ion-doped crystals, allow work toward on-demand polarization control with crystallography and provide a versatile platform for polarization-based microscale sensing in dynamical systems.

In Vivo Monitoring of Hydrogen Polysulfide via a NIR-Excitable Reversible Fluorescent Probe Based on Upconversion Luminescence Resonance Energy Transfer

Hydrogen polysulfide (H₂S_n), derived from hydrogen sulfide (H₂S), has attracted increasing attention, which is suggested to be the actual signal molecule instead of H₂S in physiological and pathological processes. Reversible detection of H₂S_n through a NIR-excitable fluorescence probe is an effective means to understand its functions but is quite challenging. Herein, we reported a NIR-excitable ratiometric nanoprobe for the reversible detection of H₂S_n based on luminescence resonance energy transfer principle with upconversion nanoparticles as the energy donor and an organic molecule, SiR1, as the energy acceptor and reversible recognition unit of H₂S_n. The as-prepared nanoprobe exhibited high selectivity and fast response for the reversible detection of H₂S_n, which can monitor the formation and consumption of endogenous H₂S_n in living cells. Because of the reduced autofluorescence by NIR excitation, it was successfully applied for tracking the fluctuation of H₂S_n concentration of mice in physiological and pathological processes including inflammation and liver injury.

Power-Dependent Optimal Concentrations of Tm3+ and Yb3+ in Upconversion Nanoparticles

Lanthanide-doped upconversion nanoparticles (UCNPs) have enabled a broad range of emerging nanophotonics and biophotonics applications. Here, we provide a quantitative guide to the optimum concentrations of Yb3+ sensitizer and Tm3+ emitter ions, highly dependent on the excitation power densities. To achieve this, we fabricate the inert-core@active-shell@inert-shell architecture to sandwich the same volume of the optically active section. Our results show that highly doped UCNPs enable an approximately 18-fold enhancement in brightness over that of conventional ones. Increasing the Tm3+ concentration improves the brightness by 6 times and increases the NIR/blue ratio by 11 times, while the increase of Yb3+ concentration enhances the brightness by 3 times and only slightly affects the NIR/blue ratio. Moreover, the optimal doping concentration of Tm3+ varies from 2% to 16%, which is highly dependent on the excitation power density ranging from 102 to 107 W/cm2. This work provides a guideline for designing bright UCNPs under different excitation conditions.

Catalytic Chiral Photochemistry Sensitized by Chiral Hosts-Grafted Upconverted Nanoparticles

Singlet chiral photocatalysis is highly challenging. Herein, we report fluorescence resonance energy transfer (FRET)-based chiral photocatalysis with γ-cyclodextrin (CD)-grafted lanthanide-doped upconverted nanoparticles (UCNP). The CD-modified UCNP strongly emits in the UV wavelength region upon excitation with a 980 nm laser, which selectively sensitizes the photosubstrates complexed by CD on the surface of UCNP through FRET. Therefore, enantiodifferentiating photocyclodimerization of anthracene or naphthalene derivatives sensitized by the CD-modified UCNP gives photoproducts in good enantioselectivity even in the presence of a catalytic amount of CD-modified UCNP. Moreover, the photocatalysts are readily separated and could be reused for at least six cycles without decreasing the enantioselectivity.

Engineering the Compositional Architecture of Core-Shell Upconverting Lanthanide-Doped Nanoparticles for Optimal Luminescent Donor in Resonance Energy Transfer: The Effects of Energy Migration and Storage

Förster Resonance Energy Transfer (FRET) between single molecule donor (D) and acceptor (A) is well understood from a fundamental perspective and is widely applied in biology, biotechnology, medical diagnostics, and bio-imaging. Lanthanide doped upconverting nanoparticles (UCNPs) have demonstrated their suitability as alternative donor species. Nevertheless, while they solve most disadvantageous features of organic donor molecules, such as photo-bleaching, spectral cross-excitation, and emission bleed-through, the fundamental understanding and practical realizations of bioassays with UCNP donors remain challenging. Among others, the interaction between many donor ions (in donor UCNP) and many acceptors anchored on the NP surface and the upconversion itself within UCNPs, complicate the decay-based analysis of D-A interaction. In this work, the assessment of designed virtual core-shell NP (VNP) models leads to the new designs of UCNPs, such as …@Er, Yb@Er, Yb@YbEr, which are experimentally evaluated as donor NPs and compared to the simulations. Moreover, the luminescence rise and decay kinetics in UCNP donors upon RET is discussed in newly proposed disparity measurements. The presented studies help to understand the role of energy-transfer and energy migration between lanthanide ion dopants and how the architecture of core-shell UCNPs affects their performance as FRET donors to organic acceptor dyes.

Expanding the toolbox of photon upconversion for emerging frontier applications

Photon upconversion in lanthanide-based materials has recently shown compelling advantages in a wide range of fields due to their exceptional anti-Stokes luminescence performances and physicochemical properties. In particular, the latest breakthroughs in the optical manipulation of photon upconversion, such as the precise tuning of switchable emission profiles and lifetimes, open up new opportunities for diverse frontier applications from biological imaging to therapy, nanophotonics and three-dimensional displays. A summary and discussion on the recent progress can provide new insights into the fundamental understanding of luminescence mechanisms and also help to inspire new upconversion concepts and promote their frontier applications. Herein, we present a review on the state-of-the-art progress of lanthanide-based upconversion materials, focusing on the newly emerging approaches to the smart control of upconversion in aspects of light intensity, colors, and lifetimes, as well as new concepts. The emerging scientific and technological discoveries based on the well-designed upconversion materials are highlighted and discussed, along with the challenges and future perspectives. This review will contribute to the understanding of the fundamental research of photon upconversion and further promote the development of new classes of efficient upconversion materials towards diversities of frontier applications in the future.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

An overview of boosting lanthanide upconversion luminescence through chemical methods and physical strategies

Lanthanide-doped upconversion nanoparticles have attracted extensive research interest due to their promising applications in various fields.

Local Structure Engineering in Lanthanide-Doped Nanocrystals for Tunable Upconversion Emissions

Upconversion emissions from lanthanide-doped nanocrystals have sparked extensive research interests in nanophotonics, biomedicine, photovoltaics, photocatalysis, etc. Rational modulation of upconversion emissions is highly desirable to meet the requirements of specific applications. Among the diverse developed methods, local structure engineering is fundamentally feasible, through which the upconversion emission intensity, selectivity, wavelength shift, and lifetime can be tuned effectively. The underlying mechanism of the local-structure-dependent upconversion emissions lies in the degree of parity hybridization and energy level splitting of lanthanide ions as well as the interionic energy transfer efficiency. Over the past few years, there has been significant progress in local-structure-engineered upconversion emissions. In this Perspective, we first introduce the principles of upconversion emissions and typical characterization methods for local structure. Subsequently, we summarize recent achievements in tuning of upconversion emissions through local structure engineering, including host composition adjustment, external field regulation, and interfacial strain management. Finally, we propose a few perspectives that should tackle the current bottlenecks. This Perspective is expected to deepen the understanding of local-structure-dependent upconversion emissions and arouse adequate attention to the engineering of local structure for desired properties of inorganic nanocrystals.

Lanthanide upconversion and downshifting luminescence for biomolecules detection

Biomolecules play critical roles in biological activities and are closely related to various disease conditions. The reliable, selective and sensitive detection of biomolecules holds much promise for specific and rapid biosensing. In recent years, luminescent lanthanide probes have been widely used for monitoring the activity of biomolecules owing to their long luminescence lifetimes and line-like emission which allow time-resolved and ratiometric analyses. In this review article, we concentrate on recent advances in the detection of biomolecule activities based on lanthanide luminescent systems, including upconversion luminescent nanoparticles, lanthanide-metal organic frameworks, and lanthanide organic complexes. We also introduce the latest remarkable accomplishments of lanthanide probes in the design principles and sensing mechanisms, as well as the forthcoming challenges and perspectives for practical achievements.

Detection of Amyloid β Oligomers by a Fluorescence Ratio Strategy Based on Optically Trapped Highly Doped Upconversion Nanoparticles-SiO2@Metal-Organic Framework Microspheres

Alzheimer's disease (AD), known as a progressive neurodegenerative disorder, has had a terrible impact on the health of aged people. Due to its severity, early diagnosis of AD is significant to retard the progress and provide timely treatment. Here, we report a fluorescence ratio detection of AD biomarker amyloid β oligomers (AβOs) by combining highly doped upconversion nanoparticles-SiO₂@metal-organic framework/black hole quencher (H-USM/BHQ-1) microspheres with optical tweezer (OT) microscopic imaging. Optical trapping a single microsphere not only avoids the interference of fluid viscosity but also provides a high power density laser source to efficiently stimulate upconversion luminescence (UCL) of highly doped upconversion nanoparticles (H-UCNPs). Under this condition, H-UCNPs show stronger UCL and greater power-dependent properties compared to low-doped ones. Moreover, the closely packed quenching molecules BHQ-1 on a metal-organic framework (ZIF-8) exhibit excellent quenching efficiency for upconversion 525 and 540 nm emission. Also, the luminescent resonance energy transfer efficiency reaches 89.58%. When different concentrations of AβOs are present, the UCL₅₄₀ recovers due to the decomposition of ZIF-8 and the release of BHQ-1. Using 540 and 654 nm emission ratio of highly doped UCNPs as reporters, the limit of detection reaches 28.4 pM for the quantitative determination of AβOs. Besides, this strategy is able to selectively quantify the AβO concentration. Therefore, we demonstrated the combination of optical trapping and highly doped UCNPs which is applied for the detection of AβOs with high sensitivity and specificity.

Enantiospecific Detection of D-Amino Acid through Synergistic Upconversion Energy Transfer

D-amino acids (DAAs) are indispensable in regulating diverse metabolic pathways. Selective and sensitive detection of DAAs is crucial for understanding the complexity of metabolic processes and managing associated diseases. However, current DAA detection strategies mainly rely on bulky instrumentation or electrochemical probes, limiting their cellular and animal applications. Here we report an enzyme-coupled nanoprobe that can detect enantiospecific DAAs through synergistic energy transfer. This nanoprobe offers near-infrared upconversion capability, a wide dynamic detection range, and a detection limit of 2.2 μM, providing a versatile platform for in vivo noninvasive detection of DAAs with high enantioselectivity. These results potentially allow real-time monitoring of biomolecular handedness in living animals, as well as developing antipsychotic treatment strategies.

Lanthanide-doping enables kinetically controlled growth of deep-blue two-monolayer halide perovskite nanoplatelets

Impurity doping has been widely applied in nanomaterial synthesis for modulating the crystallographic phase, morphology, and size of nanocrystalline materials, but mostly by altering thermodynamic equilibria of final products. Here, we report the use of lanthanide dopants to manipulate the growing kinetics of halide perovskite nanocrystals to enable the preparation of highly anisotropic two-dimensional (2D) CsPbBr3-based nanoplatelets with precisely controlled thickness. We demonstrate that the incorporation of trivalent lanthanides increases the energy barrier in growing three-monolayer (3 ML) CsPbBr3 from a 2 ML intermediate. It enables the growth of thermodynamically unfavorable 2 ML CsPbBr3 products through kinetic control. This finding provides a novel approach for dimensional control of perovskite nanocrystals with strong quantum confinement. It offers opportunities to generate deep-blue emitting (at 430 nm) CsPbBr3:Lu3+ nanoplatelets with good structural- and photo-stabilities potentially useful for many applications including light-emitting, lasers, and photocatalysis.

NIR-II Upconversion Photoluminescence of Er3+ Doped LiYF4 and NaY(Gd)F4 Core-Shell Nanoparticles

The availability of colloidal nano-materials with high efficiency, stability, and non-toxicity in the near infrared-II range is beneficial for biological diagnosis and therapy. Rare earth doped nanoparticles are ideal luminescent agents for bio-applications in the near infrared-II range due to the abundant energy level distribution. Among them, both excitation and emission range of Er³⁺ ions can be tuned into second biological window range. Herein, we report the synthesis of ∼15 nm LiYF₄, NaYF₄, and NaGdF₄ nanoparticles doped with Er³⁺ ions and their core-shell structures. The luminescent properties are compared, showing that Er³⁺ ions with single-doped LiYF₄ and NaYF₄ nanoparticles generate stronger luminescence than Er³⁺ ions with doped NaGdF₄, despite the difference in relative intensity at different regions. By epitaxial growth an inert homogeneous protective layer, the surface luminescence of the core-shell structure is further enhanced by about 5.1 times, 6.5 times, and 167.7 times for LiYF₄, NaYF₄, and NaGdF₄, respectively. The excellent luminescence in both visible and NIR range of these core-shell nanoparticles makes them potential candidate for bio-applications.

Photon upconversion through triplet exciton-mediated energy relay

Exploration of upconversion luminescence from lanthanide emitters through energy migration has profound implications for fundamental research and technology development. However, energy migration-mediated upconversion requires stringent experimental conditions, such as high power excitation and special migratory ions in the host lattice, imposing selection constraints on lanthanide emitters. Here we demonstrate photon upconversion of diverse lanthanide emitters by harnessing triplet exciton-mediated energy relay. Compared with gadolinium-based systems, this energy relay is less dependent on excitation power and enhances the emission intensity of Tb3+ by 158-fold. Mechanistic investigations reveal that emission enhancement is attributable to strong coupling between lanthanides and surface molecules, which enables fast triplet generation (<100 ps) and subsequent near-unity triplet transfer efficiency from surface ligands to lanthanides. Moreover, the energy relay approach supports long-distance energy transfer and allows upconversion modulation in microstructures. These findings enhance fundamental understanding of energy transfer at molecule-nanoparticle interfaces and open exciting avenues for developing hybrid, high-performance optical materials.

DeepFRET, a software for rapid and automated single-molecule FRET data classification using deep learning

Single-molecule Förster Resonance energy transfer (smFRET) is an adaptable method for studying the structure and dynamics of biomolecules. The development of high throughput methodologies and the growth of commercial instrumentation have outpaced the development of rapid, standardized, and automated methodologies to objectively analyze the wealth of produced data. Here we present DeepFRET, an automated, open-source standalone solution based on deep learning, where the only crucial human intervention in transiting from raw microscope images to histograms of biomolecule behavior, is a user-adjustable quality threshold. Integrating standard features of smFRET analysis, DeepFRET consequently outputs the common kinetic information metrics. Its classification accuracy on ground truth data reached >95% outperforming human operators and commonly used threshold, only requiring ~1% of the time. Its precise and rapid operation on real data demonstrates DeepFRET's capacity to objectively quantify biomolecular dynamics and the potential to contribute to benchmarking smFRET for dynamic structural biology.