DNA nano-pocket for ultra-selective uranyl extraction from seawater

Unlocking new frontiers: DNA nanotechnology's impact on acute kidney injury diagnosis and treatment

Acute kidney injury (AKI) serves as an independent risk factor for chronic kidney disease (CKD) and hastens its progression. However, effective early diagnosis and treatment methods for AKI are still limited in clinical practice. There is a pressing need to develop fast, effective, and noninvasive diagnostic methods for AKI, as well as treatments that reduce nephrotoxicity. DNA nanotechnology, utilizing the programmable properties of DNA to engineer nanostructures and nanodevices, has achieved significant advancements in disease diagnosis and treatment. The application of DNA nanotechnology for kidney disease, particularly AKI, has been increasingly explored. This review encompasses the advancement of rapid and highly sensitive detection methods for AKI biomarkers, alongside the development of targeted drug delivery systems to the kidneys. These innovations facilitate precise treatment while minimizing adverse drug effects. The review underscores the progress in employing DNA nanotechnology for AKI diagnosis and treatment. Initially, we examine DNA nanotechnology-based strategies for AKI diagnosis, with an emphasis on biomarker detection. Subsequently, we delve into the therapeutic applications of DNA nanotechnology in AKI, highlighting targeted drug delivery and reduced toxicity. Finally, we offer insights into the challenges and opportunities associated with the clinical application of DNA nanotechnology in AKI management.

Bayesian Optimized Crystallization of a Hydroxamate-Functionalized Covalent Organic Framework for Enhanced Uranyl Uptake

To address the synthetic challenge of covalent organic frameworks (COFs), especially those with interfering functional groups, a Bayesian optimization (BO) centered approach is developed and implemented. Specifically, the crystallinity index for a well-known TAPB-PDA COF is improved by ≈80% via a one-round proof-of-concept BO. For a more complicated task toward the preparation of hydroxamate-functionalized TpPa COF, where improvement of both crystallinity and selectivity (against a crystalline byproduct) is needed, an efficient protocol comprising 6 BO iterations (with 5 experiments each) from an initial 64-experiment dataset is successfully developed. The functional COF, namely SUM-99 (SUM = Sichuan University Materials), with enhanced crystallinity, is subsequently demonstrated to be an effective, reversible, and selective sorbent for aquatic uranyl uptake. The importance of improved crystallinity, reflecting the power of BO, is showcased by a 23.7% increase in uranyl adsorption capacity. Therefore, the BO protocol and toolkit is presented for the efficient evolution of COF synthetic conditions, toward higher crystallinity and enhanced performances for downstream applications.

Efficient and stable adsorption uranium from wastewater by P-ZBCT composite adsorbent at low dosage

In this research, a new synthesis approach was developed for an adsorbent, namely the phosphorylated ZIF-8/bamboo charcoal/chitosan/tannic acid (P-ZBCT) composite, for the efficient adsorption of uranyl ions from wastewater at low dosages. Impressively, the uranium adsorption rate of P-ZBCT reaches up to 98 % at a low dosage of 0.056 g/L in a 10-mg/L uranium solution, outperforming most reported uranium adsorption materials. The theoretical maximum adsorption capacity of P-ZBCT for uranium at 308 K and pH 6.0 is 2357.69 mg/g, with uranium adsorption being a spontaneous endothermic chemical reaction. Mechanistic analysis reveals that surface functional groups such as PO, amino group, and CN play a pivotal role in uranium adsorption. A competitive adsorption experiment shows that zinc is the most competitive with uranium adsorption; however, the partition coefficient of U is 11 times that of zinc, indicating that the absorption of uranium is more selective than that of other metal ions, such as zinc. Adsorption treatment using P-ZBCT successfully reduces the uranium content in real uranium tailings-containing pond wastewater to 34 μg/L. P-ZBCT demonstrates exceptional recycling performance, maintaining an adsorption rate of 85 % even after 10 sorption-desorption cycles. Therefore, P-ZBCT exhibits significant potential for efficiently extracting uranium from low-concentration uranium-containing wastewater.

Spherical Nucleic Acids-Directed Cryosynthesis of Manganese Nanoagents for Tumor Imaging and Therapy

DNAzyme-based theranostic nanotechnologies that can respond to specific tumor pathophysiological parameters hold great promise for tumor diagnostics and effective treatments. However, their clinical translation is hindered by insufficient intracellular availability of essential metal cofactors required for DNAzyme activation. To overcome this limitation, we developed a temperature-controlled synthesis strategy for fabricating multifunctional DNA-templated manganese carbonate nanoparticles (DtMnP). The process involves three critical phases: (i) spherical nucleic acid hybrids, DNAzyme-functionalized AuNPs, serve as scaffolds for spatially controlled Mn2+ deposition through phosphate coordination, initiating heterogeneous nucleation of MnCO3; (ii) rapid liquid nitrogen freezing induces nanoparticle growth along DNA templates; and (iii) lyophilization-mediated structural stabilization enables convenient long-term storage. The DtMnP exhibits pH-responsive dissolution, releasing 90% of Mn2+ within 60 min under tumor microenvironment conditions (pH 5.5). The released Mn2+ ion enables dual functionality: (i) superior magnetic resonance imaging (MRI) contrast of MCF-7 xenograft models with enhanced biosafety, and (ii) synergistic therapeutic efficacy through DNAzyme-mediated EGR-1 gene silencing (60% mRNA downregulation) combined with Mn2+-catalyzed Fenton reactions generating cytotoxic hydroxyl radicals (45% apoptosis in MCF-7 cells). The cryo-encapsulated DtMnP exemplifies a flexible and efficient approach for integrating various functional components into a single nanoparticle for tumor theranostic applications.

Highly sensitive and specific uranyl ion detection by a fluorescent sensor containing uranyl-specific recognition sites

Uranium pollution has become a serious threat to human health and environmental safety, making the detection of environmental uranium contamination of great importance. The sensitive and specific detection of uranyl ions, which are the dominant form of uranium in the environment, depends on the specific recognition of uranyl ions by chemical groups. In this study, a novel fluorescent sensor containing a highly specific uranyl ion recognition group is synthesized via the reaction of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and 1,1,2,2-tetra(4-carboxylphenyl)ethylene (TPE-(COOH)4). Owing to the effects of aggregation-induced emission (AIE) and intramolecular charge transfer (ICT), the fluorescent sensor, named TPE-EDC, exhibits significant fluorescent properties in aqueous environments. The binding of uranyl ions by specific recognition groups in TPE-EDC leads to a decrease in the ICT effect, thus causing a significant reduction in the emission intensity of TPE-EDC. The attenuation of the fluorescence intensity of TPE-EDC shows an excellent linear relationship with an increase in uranyl ion concentration. TPE-EDC exhibits ultra-sensitive and ultra-selective detection ability for uranyl ions with an ultra-low detection limit of 69 pmol/L and an ultrashort response time of 30 s. These high detection performances render the fluorescent sensor TPE-EDC a promising candidate for early warning of uranium pollution.

Ion-exchange induced multiple effects to promote uranium uptake from nonmarine water by micromotors

As the fundamental resource in nuclear energy, uranium is a sword of two sides, due to its radioactive character that could cause severe impact to the environment and living creatures once released by accident. However, limited by the passive ion transport, the currently available uranium adsorbents still suffer from low adsorption kinetics and capacity. Here, we report a self-driven modular micro-reactor composed of magnetizable ion-exchange resin and adsorbents that can be used to dynamically remove uranium from nonmarine waters. Because of the long-range pH gradient and phoretic flow established by the recyclable ion-exchange resin, the micro-reactor shows a fast uranium adsorption rate and reaches a uranium extraction capacity of 629.3 mg g-1 within 10 min in 30 ppm uranium solution, as well as good recyclability in repeated use. Numerical simulation result confirms that the phoretic flow and electric field accelerate uranium transport to the adsorbent. Our work provides a new solution for the removal of radioactive uranium with high efficiency.

Coordination-Induced Magnetism Strategy for Highly Selective and Efficient Uranium Separation

Highly efficient separation of dispersed uranium is important for the sustainable development of nuclear industry, and adsorption is the most recognized approach. However, there are many coexisting interfering metal ions that compete with uranyl ion for the chelating ligands in the adsorbents and lead to low separation selectivity and efficiency. Herein, a coordination-induced magnetism strategy is presented for the separation of uranium based on the conversion of diamagnetic cyanoferrocene (Fc-CN) nanocrystals to uranium-containing magnetic recoverable ferromagnetic aggregates. Different from previous adsorption strategies, this strategy combines the mechanisms of photocatalytic uranium enrichment and chemical uranium adsorption. Under light irradiation, electron of Fe(II) in Fc-CN is excited and transfers to uranyl ion via the cyano group to form tight coordination bond between N atom in cyano group and uranium. This phenomenon is unique for uranyl ion, and thus, a high uranium removal rate of 97.98% is achieved in simulated nuclear wastewater with the presence of tremendous interfering ions, proving its highly selective and efficient uranium separation performance. The ability to form highly stable magnetic aggregates via photoinduced interaction between Fc-CN and uranium enriches the understanding on the chemical properties of Fc-CN and uranium.

Boosting uranium extraction from Seawater by micro-redox reactors anchored in a seaweed-like adsorbent

Efficient extraction of uranium from seawater is expected to provide virtually infinite fuel sources to power nuclear reactors and thus enable sustainable development of nuclear energy. The extraction efficiency for uranium greatly depends on the availability of active adsorption sites on the adsorbents. Maximization of the utilization rate of the binding sites in the adsorbent is vital for improving adsorption capacity. Herein, micro-redox reactors functioned by Cu(I)/Cu(II) conversion are constructed internally in an adsorbent bearing both amidoxime and carboxyl groups to induce active regeneration of the inactivated binding sites to enhance uranium capture. This adsorbent has high adsorption capacity (962.40 mg-U/g-Ads), superior anti-fouling ability as well as excellent uranium uptake (14.62 mg-U/g-Ads) in natural seawater after 56 days, placing it at the top of high-performance sorbent materials for uranium harvest from seawater.

DNA Nanostructure Disintegration-Assisted SPAAC Ligation for Electrochemical Biosensing

MicroRNAs (MiRNAs) are valuable biomarkers for the diagnosis and prognosis of diseases. The development of reliable assays is an urgent pursuit. We herein fabricate a novel electrochemical sensing strategy based on the conformation transitions of DNA nanostructures and click chemistry. Duplex-specific nuclease (DSN)-catalyzed reaction is first used for the disintegration of the DNA triangular pyramid frustum (DNA TPF). A DNA triangle is formed, which in turn assists strain-promoted alkyne-azide cycloaddition (SPAAC) to localize single-stranded DNA probes (P1). After SPAAC ligation, multiple DNA hairpins are spontaneously folded, and the labeled electrochemical species are dragged near the electrode interface. By recording and analyzing the responses, a highly sensitive electrochemical biosensor is established, which exhibits high sensitivity and reproducibility. Clinical applications have been verified with good stability. This sensing strategy relies on the integration of DNA nanostructures and click chemistry, which may inspire further designs for the development of DNA nanotechnology and applications in clinical chemistry.

Bis-substituted amino acid functionalized chitosan aerogels: High uranium adsorption capacity and antibacterial properties

Based on the goal of "carbon neutralization and carbon peaking", it is still challenging to develop a high adsorption performance and environmentally friendly material for uranium extraction. We proposed a new idea of "Three-Dimensional Environmental-Friendly". A series of amino acid bis-substituted chitosan aerogels (C-1, C-2, C-3, C-4 and C-5) were prepared by ice template method and selective substitution reaction in water environment. Among them, C-3 adsorbent has the antibacterial properties of gram-positive bacteria, gram-negative bacteria and marine bacteria, which is more suitable for uranium adsorption in complex environments. Also, C-3 adsorbent solves the shortcomings of poor adsorption property and easy to cause secondary pollution during modification of traditional chitosan materials. The selectivity and adsorption capacity of uranium are further improved by the unique functional groups of serine residues. At pH = 7, the maximum adsorption capacity reaches 606.32 mg/g. In addition, C-3 adsorbent have excellent selectivity and stability. The synergistic effect of coordination, electrostatic interaction and intraparticle diffusion between C-3 adsorbent and uranium may be the key to its high adsorption performance. The high performance of chitosan adsorbent provides a new idea for the design and application of green and efficient uranium adsorption materials.

High-efficiency and economical uranium extraction from seawater with easily prepared supramolecular complexes

Developing effective adsorbents for uranium extraction from natural seawater is strategically significant for the sustainable fuel supply of nuclear energy. Herein, stable and low-cost supramolecular complexes (PA-bPEI complexes) were facilely constructed through the assembly of phytic acid and hyperbranched polyethyleneimine based on the multiple modes of electrostatic interaction and hydrogen bonding. The PA-bPEI complexes exhibited not only high uptake (841.7 mg g-1) and selectivity (uranium/vanadium selectivity = 84.1) toward uranium but also good antibacterial ability against biofouling. Mechanism analysis revealed that phosphate chelating groups and amine assistant groups coordinated the uranyl ions together with a high affinity. To be more suitable for practical applications, powdery PA-bPEI complexes were compounded with sodium alginate to fabricate various macroscopic adsorbents with engineered forms, which achieved an extraction capacity of 9.0 mg g-1 in natural seawater after 50 days of testing. Impressively, the estimated economic cost of the macroscopic adsorbent for uranium extraction from seawater ($96.5 ∼ 138.1 kg-1 uranium) was lower than that of all currently available uranium adsorbents. Due to their good uranium extraction performance and low economic cost, supramolecular complex-based adsorbents show great potential for industrial uranium extraction from seawater.

Ultra-highly efficient enrichment of uranium from seawater via studtite nanodots growth-elution cycle

Consecutive uranium extraction from seawater is a promising approach to secure the long-term supply of uranium and the sustainability of nuclear energy. Here, we report an ultra-highly efficient strategy via studtite nanodots growth with impressive uranyl uptake capacity of ~ 154.50 mg/g from natural seawater in 12 consecutive days (i.e., average for ~ 12.875 mg/g/day). Uranyl can be extracted as studtite under visible light via the reaction between the adsorbed uranyl and the photogenerated H2O2 with imine-based Covalent-Organic Framework photocatalysts. In detail, over Tp-Bpy, Tp-Bpy-2 and Tp-Py with multiple uranyl chelating sites, uranyl is found extracted as studtite nanodots which can be eluted readily, while over Tp-Bd and Tb-Bpy, uranyl is transformed into studtite nanorods that is more inert for elution. Abundant chelating sites of uranyl via structural regulation of COF photocatalysts are proved to facilitate the formation and efficient elution of studtite nanodots.

A Mitochondria-Targeted Heptamethine Indocyanine Small Molecular Chelator for Attenuating Uranium Nephrotoxicity

Radionuclide uranium has both a chemical and radioactive toxicity, leading to severe nephrotoxicity as it predominantly deposits itself in the kidneys after entering into human bodies. It crosses renal cell membranes, accumulates in mitochondria and causes mitochondrial oxidative damage and dysfunction. In this study, a mitochondria-targeted heptamethine indocyanine small molecule chelator modified with gallic acid (IR-82) is synthesized for uranium detoxication. Both gallic acid and sulfonic acid, as two hydrophilic endings, make IR-82, being excreted feasibly through kidneys. Gallic acid with polyphenol groups has a steady metal chelation effect and potent antioxidant ability, which may facilitate IR-82-alleviated uranium nephrotoxicity simultaneously by enhancing uranium decorporation from the kidneys and reducing mitochondrial oxidative damage. Cell viability assays demonstrate that IR-82 can significantly improve the cell viability of uranium-exposed human renal (HK-2) cells. It is also demonstrated to accumulate in mitochondria and reduce mitochondrial ROS and total intracellular ROS, as well as intracellular uranium content. In vivo imaging experiments in mice show that IR-82 could be excreted out through kidneys. ICP-MS tests further reveal that IR-82 can efficiently decrease the uranium deposition in mouse kidneys. IR-82 treatment improves the animal survival rate and renal function of experimental mice after high-dose uranium exposure. Collectively, our study may evidence that the development of uranium decorporation agents with kidney-mitochondrion dual targeting abilities is a promising strategy for attenuating uranium-induced nephrotoxicity.

An imidazole-based covalent-organic framework enabling a super-efficiency in sunlight-driven uranium extraction from seawater

Uranium extraction from seawater represents an effective way to solve the difficulty of the insufficient uranium supply chain. However, this route is still restricted by the low extraction efficiency of reported adsorbents. Here, we find that reversing the donor-acceptor in imidazole-based COFs (covalent-organic frameworks) would be effective for enhancing the extraction efficiency of uranium. As a result, the TI-COF is found to enable a uranium extraction efficiency up to 8.8 mg g-1 day-1 from seawater under visible light irradiation, exceeding all established adsorbents for such use, and an unprecedented uranium extraction efficiency up to 6.9 mg g-1 day-1 from seawater under natural sunlight.

Designing biomimetic two-dimensional channels for uranium separation from seawater

Efficient separation of uranium from seawater stands as a pivotal challenge. This study unveils an approach focusing on the ingenious design of biomimetic two-dimensional (2D) membranes tailored explicitly for this purpose. Leveraging the unique interplay of DNA strands housing U aptamers, pH-responsive i-motifs, and poly A(10) segments ingeniously embedded within graphene oxide membranes, a distinctive biomimetic 2D channel is engineered. The strategic integration of these bio-inspired elements enables dynamic adjustment of interlayer spacing, augmenting both the permeability of the membrane and the selectivity of the aptamer for uranyl ions. During the separation process, the encounter between uranyl ions and the enhanced aptamer within the interlayers initiates a crucial interaction, triggering a specific concentration polarization mechanism. This mechanism stands as the cornerstone for achieving a highly selective separation of uranyl ions from the vast and complex matrix of seawater. The membrane exhibits excellent performance in real seawater, with a rejection rate of uranyl ions of ≈100% and sustained selectivity of uranyl ions over ten cycles. Importantly, the selectivity of uranium and vanadium can reach 14.66. The significance of this research lies not only in the effective separation of uranyl ions but also in showcasing the broader applicability of 2D membrane design in chemical engineering.

Facile and scalable synthesis of functionalized hierarchical porous polymers for efficient uranium adsorption

Efficient uranium capture from wastewater holds great importance for the environmental remediation and sustainable development of nuclear energy, but it is a tremendous challenge. Herein, a facile and scalable approach is reported to fabricate functionalized hierarchical porous polymers (PPN-3) decorated with high density of phosphate groups for uranium adsorption. The as-constructed hierarchical porous structure could allow rapid diffusion of uranyl ions, while abundant phosphate groups that serve as adsorption sites could provide the high affinity for uranyl. Consequently, PPN-3 shows a high uranium adsorption uptake of 923.06 mg g-1 and reaches adsorption equilibrium within simply 10 min in uranium-spiked aqueous solution. Moreover, PPN-3 affords selective adsorption of uranyl over multiple metal ions and possesses a rapid and high removal rate of U(VI) in real water systems. Furthermore, this study offers direct polymerization strategy for the cost-effective fabrication of phosphate-functionalized porous organic polymers, which may provide promising application potential for uranium extraction.

Achieving ultrahigh uranium/vanadium selectivity of poly(amidoxime) via coupling MXene-enabled strong intermolecular interaction and separated photothermal interface

Poly(amidoxime) (PAO) has been recognized as the most potential candidate for extracting uranium from seawater, owing to its merits of outstanding uranium affinity, low cost, and large-scale production. Despite remarkable achievements, existing PAO sorbents suffer from unsatisfactory uranium extraction efficiency and selectivity, as imposed by the inherently sluggish uranium adsorption kinetics and inevitable spatial configuration transition of amidoxime, which diminishes uranium affinity. Herein, we discover a facile and integrated design to elaborate a PAO/MXene nanocomposite that delivers ultrahigh and durable uranium/vanadium (U/V) selectivity. The key to our design lies in harnessing MXene-enabled strong intermolecular interactions to PAO to minimize the spatial configuration transition of amidoxime and stabilizing its superior uranium affinity, as well as creating a separated photothermal interface to maximize temperature-strengthened affinity for uranium over vanadium. Such a synergetic effect allows the nanocomposite to acquire over a 4-fold improvement in U/V selectivity compared to that of pure PAO as well as an unprecedented distribution coefficient of uranium compared to most state-of-the-art sorbents. We further demonstrate that our nanocomposite exhibits durable U/V selectivity with negligible attenuation and good antibacterial ability even in long-term operation. The design concept and extraordinary performance in this study bring PAO-based sorbents a step closer to practical uranium extraction from seawater.

Emerging Nanomaterials toward Uranium Extraction from Seawater: Recent Advances and Perspectives

Nuclear energy holds great potential to facilitate the global energy transition and alleviate the increasing environmental issues due to its high energy density, stable energy output, and carbon-free emission merits. Despite being limited by the insufficient terrestrial uranium reserves, uranium extraction from seawater (UES) can offset the gap. However, the low uranium concentration, the complicated uranium speciation, the competitive metal ions, and the inevitable marine interference remarkably affect the kinetics, capacity, selectivity, and sustainability of UES materials. To date, massive efforts have been made with varying degrees of success to pursue a desirable UES performance on various nanomaterials. Nevertheless, comprehensive and systematic coverage and discussion on the emerging UES materials presenting the fast-growing progress of this field is still lacking. This review thus challenges this position and emphatically focuses on this topic covering the current mainstream UES technologies with the emerging UES materials. Specifically, this review elucidates the causality between the physiochemical properties of UES materials induced by the intellectual design strategies and the UES performances and further dissects the relationships of materials-properties-activities and the corresponding mechanisms in depth. This review is envisaged to inspire innovative ideas and bring technical solutions for developing technically and economically viable UES materials.

Phosphorus Nitride Imide Nanotubes for Uranium Capture from Seawater

Nuclear power plays a pivotal role in the global energy supply. The adsorption-based extraction of uranium from seawater is crucial for the rapid advancement of nuclear power. The phosphorus nitride imide (PN) nanotubes were synthesized in this study using a solvothermal method, resulting in chemically stable cross-linked tubular hollow structures that draw inspiration from the intricate snowflake fractal pattern. Detailed characterization showed that these nanotubes possess a uniformly distributed five-coordinated nanopocket, which exhibited great selectivity and efficiency in binding uranium. PN nanotubes captured 97.34% uranium from the low U-spiked natural seawater (∼355 μg L-1) and showed a high adsorption capacity (435.58 mg g-1), along with a distribution coefficient, KdU > 8.71 × 107 mL g-1. In addition, PN nanotubes showed a high adsorption capacity of 7.01 mg g-1 in natural seawater. The facile and scalable production of PN nanotubes presented in this study holds implications for advancing their large-scale implementation in the selective extraction of uranium from seawater.

Interlayer manipulation of bio-inspired Ti3C2Tx nanocontainer through intercalation of amino acid molecules to dramatically boosting uranyl hijacking capability from seawater

More than 4.5 billion tons of unconventional uranium resources [UO2(CO3)3]4- are uniformly dissolved in seawater, providing a sustainable and abundant fuel source for the development of nuclear energy. Herein, we presented a rational design and development of Ti3C2Tx nanocontainer inspired by the exceptional selectivity and affinity exhibited by superb-uranyl proteins through amino acid intercalation. The amino acid intercalation of Ti3C2Tx demonstrated exceptional UO22+ capture capacity (Arg-Ti3C2Tx, His-Ti3C2Tx, and Lys-Ti3C2Tx with qmax values of 594.46, 846.04, and 1030.17 mg/g). Furthermore, these intercalated materials exhibited remarkable sequestration efficiency and selectivity (Uinitial = ∼45.2 ∼7636 μg/L; ∼84.45% ∼98.08%; and ∼2.72 ×104 ∼1.28 ×105 KdU value), despite the presence of an overwhelming surplus of Na+, Ca2+, Mg2+, and Co2+ ions. Significantly, even in the 0.3 M NaHCO3 solution and surpassing 103-fold of the Na3VO4 system, the adsorption efficiency of Lys-Ti3C2Tx still achieved a remarkable 63.73% and 65.05%. Moreover, the Lys-Ti3C2Tx can extract ∼30.23 ∼8664.03 μg/g uranium after 24 h contact in ∼13.3 ∼5000 μg/L concentration from uranium-spiked natural seawater. The mechanism analysis revealed that the high binding capability can be attributed to the chelation of carboxyl and amino groups with uranyl ions. This innovative state-of-the-art approach in regulating uranium harvesting capability through intercalation of amino acid molecules provides novel insights for extracting uranium from seawater.

Yeast-Raised Polyamidoxime Hydrogel Prepared by Ice Crystal Dispersion for Efficient Uranium Extraction from Seawater

Uranium extraction from seawater has attracted worldwide attention due to the massive reserves of uranium. Due to the straightforward synthesis and strong affinity toward uranyl ions (UO2 2+), the amidoxime group shows promise for use in highly efficient uranium capture.  However, the low mass transfer efficiency within traditional amidoxime-based adsorbents severely limits the adsorption rate and the utilization of adsorption sites. In this work, a macroporous polyamidoxime (PAO) hydrogel is prepared by yeast-based biological foaming combined with ice crystal dispersion that effectively maintained the yeast activity. The yeast-raised PAO (Y-PAO) adsorbent has numerous bubble-like holes with an average pore diameter >100 µm. These macropores connected with the intrinsic micropores of PAO to construct efficient diffusion channels for UO2 2+ provided fast mass transporting channels, leading to the sufficient exposure of hidden binding sites. The maximum adsorption capacity of Y-PAO membrane reached 10.07 mg-U/g-ads, ≈1.54 times higher than that of the control sample. It took only eight days for Y-PAO to reach the saturation adsorption capacity of the control PAO (6.47 mg-U/g-ads, 28 days). Meanwhile, Y-PAO possessed excellent ion selectivity, good reusability, and low cost. Overall, the Y-PAO membrane is a highly promising adsorbent for use in industrial-scale uranium extraction from seawater.

Ultrafast Removal of Thorium and Uranium from Radioactive Waste and Groundwater Using Highly Efficient and Radiation-Resistant Functionalized Triptycene-Based Porous Organic Polymers

Thorium (Th) and uranium (U) are important strategic resources in nuclear energy-based heavy industries such as energy and defense sectors that also generate significant radioactive waste in the process. The management of nuclear waste is therefore of paramount importance. Contamination of groundwater/surface water by Th/U is increasing at an alarming rate in certain geographical locations. This necessitates the development of strategic adsorbent materials with improved performance for capturing Th/U species from radioactive waste and groundwater. This report describes the design of a unique, robust, and radiation-resistant porous organic polymer (POP: TP-POP-SO3NH4), which demonstrates ultrafast removal of Th(IV) (<30 s)/U(VI) (<60 s) species present in simulated radioactive wastewater/groundwater samples. Thermal, chemical, and radiation stabilities of these POPs were studied in detail. The synthesized ammoniated POP revealed exceptional capture efficiency for trace-level Th (<4 ppb) and U (<3 ppb) metal ions through the cation-exchange mechanism. TP-POP-SO3NH4 shows a significant sorption capacity [Th (787 mg/g) and U (854 mg/g)] with an exceptionally high distribution coefficient (Kd) of 107 mL/g for Th. This work also demonstrates a facile protocol to convert a nonperforming POP, by simple chemical modifications, into a superfast adsorbent for efficient uptake/removal of U/Th.

Preparation Strategies, Functional Regulation, and Applications of Multifunctional Nanomaterials-Based DNA Hydrogels

With the extensive attention of DNA hydrogels in biomedicine, biomaterial, and other research fields, more and more functional DNA hydrogels have emerged to match the various needs. Incorporating nanomaterials into the hydrogel network is an emerging strategy for functional DNA hydrogel construction. Surprisingly, nanomaterials-based DNA hydrogels can be engineered to possess favorable properties, such as dynamic mechanical properties, excellent optical properties, particular electrical properties, perfect encapsulation properties, improved magnetic properties, and enhanced antibacterial properties. Herein, the preparation strategies of nanomaterials-based DNA hydrogels are first highlighted and then different nanomaterial designs are used to demonstrate the functional regulation of DNA hydrogels to achieve specific properties. Subsequently, representative applications in biosensing, drug delivery, cell culture, and environmental protection are introduced with some selected examples. Finally, the current challenges and prospects are elaborated. The study envisions that this review will provide an insightful perspective for the further development of functional DNA hydrogels.

Functionalized hydrogen-bonded organic superstructures via molecular self-assembly for enhanced uranium extraction

Effective uranium extraction from water is essential for the development of nuclear power industry and the protection of human health and environment. Nevertheless, it still remains challenging to realize efficient and cost-effective uranium extraction. Herein, a fast and simple method for the direct fabrication of novel functionalized hydrogen-bonded organic superstructures via molecular self-assembly is reported. The as-constructed flower-like superstructures (MCP-5) can allow the exposure of adsorption sites and facilitate the transport of uranyl ions, while synergism between amino and phosphate groups can realize selective uranium extraction. Consequently, MCP-5 possesses excellent uranium adsorption ability with a high saturated adsorption capacity of 950.52 mg g-1, high utilization rate of adsorption sites and adsorption equilibrium time of simply 5 min in uranium-spiked aqueous solution. Furthermore, MCP-5 offers selective uranium adsorption over a broad range of metal ions. The facile synthesis and low-cost raw materials make it have promising potential for uranium capture. Simultaneously, this study opens a design avenue of functionalized hydrogen-bonded organic material for efficient uranium extraction.

Heavy Metal-Induced Assembly of DNA Network Biosensor from Double-Loop Hairpin Probes for Ultrasensitive Detection of UO22+ in Water and Soil Samples

The uranyl ion (UO22+) is the most stable form of uranium, which exhibits high toxicity and bioavailability posing a severe risk to human health. The construction of ultrasensitive, reliable, and robust sensing techniques for UO22+ detection in water and soil samples remains a challenge. Herein, a DNA network biosensor was fabricated for UO22+ detection using DNAzyme as the heavy metal recognition element and double-loop hairpin probes as DNA assembly materials. UO22+-activated specific cleavage of the DNAzyme will liberate the triggered DNA fragment, which can be utilized to launch a double-loop hairpin probe assembly among Hab, Hbc, and Hca. Through multiple cyclic cross-hybridization reactions, hexagonal DNA duplex nanostructures (n[Hab•Hbc•Hca]) were formed. This DNA network sensing system generates a high fluorescence response for UO22+ monitoring. The biosensor is ultrasensitive, with a detection limit of 2 pM. This sensing system also displays an excellent selectivity and robustness, enabling the DNA network biosensor to work even in complex water and soil samples with excellent accuracy and reliability. With the advantages of enzyme-free operation, outstanding specificity, and high sensitivity, our proposed DNA network biosensor provides a reliable, simple, and robust method for trace levels of UO22+ detection in environmental samples.

Perilla frutescens: A new strategy for uranium decorporation

Radionuclide uranium is a great threat to human health, due to its high chemical toxicity and radioactivity. Finding suitable uranium decorporation to reduce damage caused by uranium internal contamination is an important aspect of nuclear emergency response. However, the poor selectivity and/or high toxicity of the only excretory promoter approved by Food and Drug Administration (FDA) is an obvious disadvantage. Herein, we choose an edible natural product, the traditional Chinese medicine called Perilla frutescens (PF), which has wide sources and can be used as an excellent and effective uranyl decorporation. In vivo uranium decorporation assays illustrate the removal efficiency of uranium in kidney were 68.87% and 43.26%, in femur were 56.66% and 54.53%, by the test of prophylactic and immediate administration, respectively. Cell level experiments confirmed that it had better biocompatibility than CaNa3-DTPA (CaNa3-diethylenetriamine pentaacetate, a commercial actinide excretion agent). In vitro static adsorption experiments exhibited that its excellent selectivity sorption for uranyl. All those results findings would provide new research insights about natural product for uranyl decorporation.

Self-Standing Porous Aromatic Framework Electrodes for Efficient Electrochemical Uranium Extraction

Electrochemical uranium extraction from seawater provides a new opportunity for a sustainable supply of nuclear fuel. However, there is still room for studying flexible electrode materials in this field. Herein, we construct amidoxime group modified porous aromatic frameworks (PAF-144-AO) on flexible carbon cloths in situ using an easy to scale-up electropolymerization method followed by postdecoration to fabricate the self-standing, binder-free, metal-free electrodes (PAF-E). Based on the architectural design, adsorption sites (amidoxime groups) and catalytic sites (carbazole groups) are integrated into PAF-144-AO. Under the action of an alternating electric field, uranyl ions are selectively captured by PAN-E and subsequently transformed into Na2O(UO3·H2O)x precipitates in the presence of Na+ via reversible electron transfer, with an extraction capacity of 12.6 mg g-1 over 24 days from natural seawater. This adsorption-electrocatalysis mechanism is also demonstrated at the molecular level by ex situ spectroscopy. Our work offers an effective approach to designing flexible porous organic polymer electrodes, which hold great potential in the field of electrochemical uranium extraction from seawater.

Unveiling the Critical Role of Surface Hydroxyl Groups for Electro-Assisted Uranium Extraction from Wastewater

The electro-driven extraction of uranium from fluorine-containing uranium wastewater is anticipated to address the challenge of separating fluoro-uranium complexes in conventional technologies. Herein, we developed hydroxy-rich cobalt-based oxides (CoOx) for electro-assisted uranium extraction from fluorine-containing wastewater. Relying on theoretical calculations and other spectral measurements, the hydroxy-rich CoOx nanosheets can enhance the affinity for uranium due to the existence of a substantial quantity of hydroxyl groups. Accordingly, the CoOx nanosheets exhibit outstanding U(VI) removal efficiency in the presence of fluorine ions. Through the utilization of X-ray absorption fine structure (XAFS), we confirm that hydroxy-rich CoOx nanosheets capture free uranyl ions to form a sturdy 2Oax-1U-3Oeq configuration, which can be achieved through electro-driven fluorine-uranium separation. Notably, for the first time, the whole reaction process of uranium species on the CoOx surface from the initial uranium single atom growth to uranium oxide nanosheets is monitored by aberration-corrected transmission electron microscopes (AC-TEM). This work provides a paradigm for the advancement of novel functional materials as electrocatalysts for uranium extraction, as well as a new approach for studying the evolution mechanism of uranium species.

Solar-powered simultaneous highly efficient seawater desalination and highly specific target extraction with smart DNA hydrogels

Obtaining freshwater and important minerals from seawater with solar power facilitates the sustainable development of human society. Hydrogels have demonstrated great solar-powered water evaporation potential, but highly efficient and specific target extraction remains to be expanded. Here, we report the simultaneous highly efficient seawater desalination and specific extraction of uranium with smart DNA hydrogels. The DNA hydrogel greatly promoted the evaporation of water, with the water evaporation rate reached a high level of 3.54 kilograms per square meter per hour (1 kilowatt per square meter). Simultaneously, uranyl-specific DNA hydrogel exhibited a high capture capacity of 5.7 milligrams per gram for uranium from natural seawater due to the rapid ion transport driven by the solar powered interfacial evaporation and the high selectivity (10.4 times over vanadium). With programmable functions and easy-to-use devices, the system is expected to play a role in future seawater treatment.

Biomimetic Helical Hydrogen Bonded Organic Framework Membranes for Efficient Uranium Recovery from Seawater

Inspired by the uranyl-imidazole interactions via nitrogen's (N's) of histidine residues in single helical protein assemblies with open framework geometry that allows through migration/coordination of metal ions. Here, preliminary components of a stable hydrogen-bonded organic framework (HOF) are designed to mimic the stable single helical open framework with imidazole residues available for Uranium (U) binding. The imidazolate-HOF (CSMCRI HOF2-S) is synthesized with solvent-directed H-bonding in 1D array and tuned hydrophobic CH-π interactions leading to single helix pattern having enhanced hydrolytic stability. De-solvation led CSMCRI HOF2-P with porous helical 1D channels are transformed in a freestanding thin film that showcased improved mass transfer and adsorption of uranyl carbonate. CSMCRI HOF2-P thin film can effectively extract ≈14.8 mg g-1 in 4 weeks period from natural seawater, with > 1.7 U/V (Uranium to Vanadium ratio) selectivity. This strategy can be extended for rational designing of hydrolytically stable, U selective HOFs to realize the massive potential of the blue economy toward sustainable energy.

Efficient separation of uranium(VI) from aqueous solution using magnetic Co/Al layered double oxides coated with carbon dots

Herein, magnetic layered double oxides coated with carbon dots (MLCs) were synthesized through introducing sodium dodecylbenzene sulfonate and FeCl2 into Co/Al LDH for capturing uranium from aqueous solution. When the molar ratio of Co to Al was 4 : 1, the MLC composite possessed the strongest affinity to uranium(VI) in solution with short equilibrium time (<160 min), high adsorption efficiency (94.31%) and large removal capacity (513.85 mg g-1). The adsorption behavior of MLCs for uranium(VI) was well fitted with Langmuir and pseudo-second-order models, suggesting that the monolayer chemical adsorption was the rate-limiting step. Besides, MLC-3 could be reused by using 0.15 mol L-1 ethylene diamine tetraacetic acid as an eluent and the removal percentage still remained at a high level (>83.3%) after 5 adsorption/desorption cycles. Redox reaction, chemical complexation and electrostatic attraction were proved to play significant roles in uranium(VI) separation. Therefore, MLC-3 could be used as a potential adsorbent in uranium(VI)-containing wastewater treatment due to its excellent adsorption performance for uranium(VI).

Aggregation enhanced FRET: A simple but efficient strategy for the ratiometric detection of uranyl ion

Uranium is one of the most important radionuclides but could also cause potential health risks to human beings due to its radioactive and chemical toxicity. It is an urgent task to develop a simple but efficient sensing platform for UO₂²⁺, the main existing form of uranium in environment. Herein, a rhodamine-functionalized carbon dots (o-CDs-Rho) was synthesized and applied for UO₂²⁺ sensing through a simple but novel aggregation-enhanced FRET strategy. The weak FRET efficiency (16.2%) of o-CDs-Rho in dispersed solution is significantly enhanced (>77.2%) after UO₂²⁺ triggered aggregation due to the increased number of rhodamine acceptors around each CDs from dispersed 80 to aggregated 2800. This is the first ratiometric fluorescence sensor with an inverse change of fluorescence intensity at dual emission wavelengths under single-wavelength excitation for UO₂²⁺. Under optimized experiment conditions, o-CDs-Rho nanosensor shows a low detection limit of 53 nM and excellent selectivity. Meanwhile, the as-prepared nanosensor also shows high reliability and stability. These excellent properties make it successful in detecting uranium content in real samples.

High-efficiency uranium extraction from seawater by low-cost natural protein hydrogel

Utilization of uranium resource in seawater are highly possible to meet the growth demands for the sustainable development of nuclear energy industry. Bio-adsorbents exhibit high performance in terms of adsorption selectivity, equilibrium speed, and environmental friendliness, while the high fabrication cost hinders their practical application. In this study, a low-cost soy protein isolate (SPI) is used to fabricate adsorbent named SPI hydrogel for uranium extraction. This is the first report on applying bio-adsorbents derived from low-cost natural proteins for uranium extraction. The SPI hydrogel showed high uranium adsorption capacity of 53.94 mg g^-1 in simulated nuclear wastewater and 5.29 mg g^-1 is achieved in natural seawater, which is higher than all currently available adsorbents based on non-modified natural biomolecules. The amino and oxygen-containing groups are identified as the functional groups for uranyl binding by providing four oxygen and two nitrogen atoms to form equatorial coordination with uranyl, which guarantees the high binding selectivity and affinity to uranyl ions. The low cost for accessing the raw material together with the environmental friendliness, high salt tolerance, high uranium adsorption ability, and high selectivity to uranium, make SPI hydrogel a promising adsorbent for uranium extraction from seawater and nuclear wastewater.

DNAzyme-Derived Aptamer Reversely Regulates the Two Types of Enzymatic Activities of Covalent-Organic Frameworks for the Colorimetric Analysis of Uranium

Nanozymes are nanomaterials with enzyme-mimetic activity. It is known that DNA can interact with various nanozymes in different ways, enhancing or inhibiting the activity of nanozymes, which can be used to develop various biosensors. In this work, we synthesized a photosensitive covalent-organic framework (Tph-BT) as a nanozyme, and its oxidase and peroxidase activities could be reversely regulated by surface modification of single-stranded DNA (ssDNA) for the colorimetric detection of UO₂²⁺. Tph-BT exhibits excellent oxidase activity and weak peroxidase activity, and it is surprising to find that the UO₂²⁺-specific DNA aptamer can significantly inhibit the oxidase activity while greatly enhancing the peroxidase activity. The present UO₂²⁺ interacts with the DNA aptamer to form secondary structures and detaches from the surface of Tph-BT, thereby restoring the enzymatic activity of Tph-BT. Based on the reversed regulation effects of the DNA aptamer on the two types of enzymatic activities of Tph-BT, a novel "off-on" and "on-off" sensing platform can be constructed for the colorimetric analysis of UO₂²⁺. This research demonstrates that ssDNA can effectively regulate the different types of enzymatic activities of single COFs and achieve the sensitive and selective colorimetric analysis of radionuclides by the naked eye.

Ultrafast extraction of uranium from seawater using photosensitized biohybrid system with bioinspired cascaded strategy

The highly effective utilization of uranium resources in global seawater is a viable method to satisfy the rising demands for fueling nuclear energy industry. Herein, inspired by the multi-mechanisms of the marine bacteria for uranium immobilization, CdS nanoparticles are deposited on the cell of marine bacterial strain Bacillus velezensis UUS-1 to create a photosensitized biohybrid system UUS-1/CdS. This system achieves high uranium extraction efficiency using a cascaded strategy, where the bacterial cells guarantee high extraction selectivity and the photosensitive CdS nanoparticles realize cascading photoreduction of high soluble U(VI) to low soluble U(IV) to enhance extraction capacity. As one of the fastest-acting adsorbents in natural seawater, a high extraction capacity for uranium of 7.03 mg g^-1 is achieved with an ultrafast extraction speed of 4.69 mg g^-1 d^-1. The cascaded strategy promisingly improves uranium extraction performance and pioneers a new direction for the design of adsorbents to extract uranium from seawater.

Intercalation of salicylaldoxime into layered double hydroxide: ultrafast and highly selective uptake of uranium from different water systems via versatile binding modes

We report the first example of MgAl layered double hydroxide intercalated with salicylaldoxime (SA-LDH) which exhibits excellent uranium (U(VI)) capture performance. In U(VI) aqueous solutions, the SA-LDH shows a tremendous maximum U(VI) sorption capacity (q_m^U) of 502 mg·g^-1, surpassing most known sorbents. For the aqueous solution with an initial U(VI) concentration (C₀^U) of ∼ 10 ppm, ≥99.99 % uptake is achieved in a wide pH range of 3-10. At C₀^U ∼ 20 ppm, >99 % uptake is reached within only 5 min, and pseudo-second-order kinetics rate constant (k₂) of 44.9 g·mg^-1·min^-1 reaches the record value, placing the SA-LDH amongst the fastest U adsorbing materials reported to date. In contaminated seawater with 35 ppm of U while highly concentrated metal ions of Na⁺, Mg²⁺, Ca²⁺, and K⁺, the SA-LDH still displays exceptionally high selectivity and ultrafast extraction for UO₂²⁺, giving >95 % uptake of U(VI) within 5 min, and the k₂ value of 0.308 g·mg^-1·min^-1 for seawater surpasses most reported values for aqueous solutions. Versatile binding modes toward U by SA-LDH, including complexation (UO₂²⁺ with SA^- and/or CO₃^2-), ion exchange and precipitation, contribute to the preferable uptake of U at different concentrations. X-ray absorption fine structure (XAFS) analyses demonstrate that one uranyl ion (UO₂²⁺) binds to two SA^- anions and two H₂O molecules forming 8-coordinated configuration. The U coordinates with O atom of the phenolic hydroxyl group and N atom of the -CN-O^- group of SA^-, forming a stable six-membered ring motif, which endows the fast and robust capture of U. The wonderful uranium trapping ability makes the SA-LDH among the best adsorbent used for uranium extraction from various solution systems including seawater.

Modulating Uranium Extraction Performance of Multivariate Covalent Organic Frameworks through Donor-Acceptor Linkers and Amidoxime Nanotraps

Covalent organic frameworks (COFs) can be designed to allow uranium extraction from seawater by incorporating photocatalytic linkers. However, often sacrificial reagents are required for separating photogenerated charges which limits their practical applications. Herein, we present a COF-based adsorption-photocatalysis strategy for selective removal of uranyl from seawater in the absence of sacrificial reagents. A series of ternary and quaternary COFs were synthesized containing the electron-rich linker 2,4,6-triformylphloroglucinol as the electron donor, the electron-deficient linker 4,4'-(thiazolo[5,4-d]thiazole-2,5-diyl)dibenzaldehyde as the acceptor, and amidoxime nanotraps for selective uranyl capture (with the quaternary COFs incorporating [2,2'-bipyridine-5,5'-diamine-Ru(Bp)₂]Cl₂ as a secondary photosensitizer). The ordered porous structure of the quaternary COFs ensured efficient mass transfer during the adsorption-photocatalysis capture of uranium from seawater samples, with photocatalytically generated electrons resulting in the reduction of adsorbed U(VI) to U(IV) in the form of UO₂. A quaternary COF, denoted as COF 2-Ru-AO, possessed a high uranium uptake capacity of 2.45 mg/g/day in natural seawater and good anti-biofouling abilities, surpassing most adsorbents thus far. This work shows that multivariate COF adsorption-photocatalysts can be rationally engineered to work efficiently and stably without sacrificial electron donors, thus opening the pathway for the economic and efficient extraction of uranium from the earth's oceans.

Uranium extraction from seawater: material design, emerging technologies and marine engineering

Uranium extraction from seawater (UES), a potential approach to securing the long-term uranium supply and sustainability of nuclear energy, has experienced significant progress in the past decade. Promising adsorbents with record-high capacities have been developed by diverse innovative synthetic strategies, and scale-up marine field tests have been put forward by several countries. However, significant challenges remain in terms of the adsorbents' properties in complex marine environments, deployment methods, and the economic viability of current UES systems. This review presents an up-to-date overview of the latest advancements in the UES field, highlighting new insights into the mechanistic basis of UES and the methodologies towards the function-oriented development of uranium adsorbents with high adsorption capacity, selectivity, biofouling resistance, and durability. A distinctive emphasis is placed on emerging electrochemical and photochemical strategies that have been employed to develop efficient UES systems. The most recent achievements in marine tests by the major countries are summarized. Challenges and perspectives related to the fundamental, technical, and engineering aspects of UES are discussed. This review is envisaged to inspire innovative ideas and bring technical solutions towards the development of technically and economically viable UES systems.