Transforming carbon dioxide into jet fuel using an organic combustion-synthesized Fe-Mn-K catalyst

Sustainable Materials Enabled Terahertz Functional Devices

Terahertz (THz) devices, owing to their distinctive optical properties, have achieved myriad applications in diverse domains including wireless communication, medical imaging therapy, hazardous substance detection, and environmental governance. Concurrently, to mitigate the environmental impact of electronic waste generated by traditional materials, sustainable materials-based THz functional devices are being explored for further research by taking advantages of their eco-friendliness, cost-effective, enhanced safety, robust biodegradability and biocompatibility. This review focuses on the origins and distinctive biological structures of sustainable materials as well as succinctly elucidates the latest applications in THz functional device fabrication, including wireless communication devices, macromolecule detection sensors, environment monitoring sensors, and biomedical therapeutic devices. We further highlight recent applications of sustainable materials-based THz functional devices in hazardous substance detection, protein-based macromolecule detection, and environmental monitoring. Besides, this review explores the developmental prospects of integrating sustainable materials with THz functional devices, presenting their potential applications in the future.

Accelerated Oxide-Zeolite Catalyst Design for Syngas Conversion by Reaction Phase Diagram Analysis and Machine Learning

Oxide-zeolite (OXZEO) catalyst design concept provides an alternative approach for the direct syngas-to-olefins (STO) with superior selectivity. Enhancing the activity of oxide components remains a critical and long-pursued target in this field. However, rational design strategies for optimizing oxides and improving the catalyst performance in such complex reaction networks are still lacking. We employed energetic descriptors such as the adsorption energies of CO* and O* (GadCO* and GadO*) through reaction phase diagram (RPD) analysis to predict the catalyst performance. The prediction was initially validated by the catalytic activity trends measured by experiments. Machine learning (ML) was further utilized to accelerate the screening of new catalysts. Ultimately, Bi-doped and Sb-doped ZnCrOx were theoretically predicted as optimized oxide candidates for the OXZEO reaction, which was experimentally verified to be more active than the currently best ZnCrOx counterpart. This work demonstrated enhanced OXZEO catalysts for STO as well as a research paradigm integrating theory and experiment to optimize bifunctional catalysts for complex reaction networks.

Structure-Induced Iron Carbides for CO2 Hydrogenation into Liquid Fuels

Coal resources, due to their cheapness and high-energy density, are widely used in large quantities, causing greenhouse gas emissions in turn, and thus need to be utilized in a resourceful way to reduce carbon emissions. Herein, we designed an alternative route of value-added utilization using coal-based activated carbon support loaded with Fe nanoparticles for CO2 hydrogenation to liquid fuels. The coal-based derived carbon support with tunable structure, elemental composition, defects, and special surface area controlled by a proposed two-step coking-activation strategy, in which special scale-like or alveolate structures were obtained. It was demonstrated by characterization that the structure and defect of the carbon support affect the carburization behavior of iron species, and then the highest Fe5C2 content was found on FeK@AC-2.0-750 catalyst. The high level of exposure of active χ-Fe5C2 sites presents benign liquid fuel selectivity. In situ diffuse reflectance infrared Fourier transform spectroscopy and DFT calculation further support the improved carbon chain propagation over χ-Fe5C2 rather than θ-Fe3C. Compared with commercial carbon supports, its loaded Fe-based catalyst has a better performance with 29.3% CO2 conversion and 58.8% C5+ selectivity, respectively. These results provide new insights into the development of novel nanocarbons and the efficient utilization of coal-based resources as well as broaden the design of efficient iron-based catalysts for C1 chemistry.

Development of SAFT-Based Coarse-Grained Models of Carbon Dioxide and Nitrogen

We develop coarse-grained models for carbon dioxide (CO2) and nitrogen (N2) that capture the vapor-liquid equilibria of both their single components and their binary mixtures over a wide range of temperatures and pressures. To achieve this, we used an equation of state (EoS), namely Statistical Associating Fluid Theory (SAFT), which utilizes a molecular-based algebraic description of the free energy of chain fluids. This significantly accelerates the exploration of the parameter space, enabling the development of coarse-grained models that provide an optimal description of the macroscopic experimental data. SAFT creates models of fluids by chaining together spheres, which represent coarse-grained parts of a molecule. The result is a series of fitted parameters, such as bead size, bond length, and interaction strengths, that seem amenable to molecular simulation. However, only a limited set of models can be directly implemented in a particle-based simulation; this is predominantly due to how SAFT handles overlap between bonded monomers with parameters that do not translate to physical features, such as bond length. To translate such parameters to bond lengths in a coarse-grained force-field, we performed Wang-Landau transition-matrix Monte Carlo (WL-TMMC) simulations in the grand canonical ensemble on homonuclear fused two-segment Mie models and evaluated the phase behavior at different bond lengths. In the spirit of the law of corresponding states, we found that a force field, which matches SAFT predictions, can be derived by rescaling length and energy scales based on ratios of critical point properties of simulations and experiments. The phase behavior of CO2 and N2 mixtures was also investigated. Overall, we found excellent agreement over a wide range of temperatures and pressures in pure components and mixtures, similar to TraPPE CO2 and N2 models. Our proposed approach is the first step to establishing a more robust bridge between SAFT and molecular simulation modeling.

Long-Term CO2 Hydrogenation into Liquid Fuels with a Record-High Single-Pass Yield of 31.7% over Interfacial Fe-Zn Sites

Despite extensive research efforts in CO2 hydrogenation, achieving a high yield of liquid fuels remains a significant challenge due to the limited conversion of CO2 and the considerable formation of undesired C1 byproducts. In this study, we report a record-high yield of liquid fuels from CO2 hydrogenation facilitated by an Fe-Zn catalyst enriched with interfacial sites. These interfacial sites effectively enhanced carbon chain growth through the synergistic interaction of the carbide pathway and CO insertion while simultaneously suppressing the formation of CO and CH4. Consequently, the selectivity for undesired C1 byproducts was minimized to 14.7%, while maintaining a high selectivity of 72.2% for liquid fuels. Under optimized reaction conditions including 360 °C, 4.0 MPa, 4,000 mL gcat-1 h-1, and CO2/H2 = 3, the liquid fuel yield reached 31.7% at a single-pass CO2 conversion of 48.2%.

Low-temperature CO2 Hydrogenation to Olefins on Anorthic NaCoFe Alloy Carbides

The hydrogenation of carbon dioxide to olefins (CTO) represents an ideal pathway towards carbon neutrality. However, most current CTO catalysts require a high-temperature condition of 300-450 °C, resulting in high energy consumption and possible aggregation among active sites. Herein, we developed an efficient iron-based catalyst modified with high-sodium content (7 %) and low-cobalt content (2 %), achieving a CO2 conversion of 22.0 % and an olefin selectivity of 55.9 % at 240 °C and 1000 mL/g/h, and it is even active at 180 °C and 4000 mL/g/h with more than 25 % olefins in hydrocarbons. The catalyst was kept stable under continuous operating conditions of 500 hours. Numerous characterizations and calculations reveal high content of sodium as an electronic promoter enhances the stability of the active anorthic Fe5C2 phase at low temperatures. Further incorporating the above catalyst with cobalt, as a structural promoter, causes Fe species to form a FexCoy alloying phase, which in turn facilitates the formation of higher active anorthic (FexCoy)5C2 phase, different from the conventional carbides and alloy carbides. An in-depth investigation of the synergistic effects of structural and electronic promoters can improve catalyst performance, increase reaction efficiency and cost-effectiveness, and provide profound insights for understanding and optimizing CO2 hydrogenation reactions.

Structure-reactivity relationships in CO2 hydrogenation to C2+ chemicals on Fe-based catalysts

Catalytic conversion of carbon dioxide (CO2) to value-added products represents an important avenue towards achieving carbon neutrality. In this respect, iron (Fe)-based catalysts were recognized as the most promising for the production of C2+ chemicals via the CO2 hydrogenation reaction. However, the complex structural evolution of the Fe catalysts, especially during the reaction, presents significant challenges for establishing the structure-reactivity relationships. In this review, we provide critical analysis of recent in situ and operando studies on the transformation of Fe-based catalysts in the hydrogenation of CO2 to hydrocarbons and alcohols. In particular, the effects of composition, promoters, support, and particle size on reactivity; the role of the catalyst's activation procedure; and the catalyst's evolution under reaction conditions will be addressed.

Potential pathways for CO2 utilization in sustainable aviation fuel synthesis

The development of sustainable aviation fuels (SAFs) is a must for the decarbonization of the aviation industry. This paper explores various pathways for SAF production, focusing on innovative catalytic processes for the utilization of CO2 as a potential feedstock. Key pathways analyzed include the Modified Fischer-Tropsch Synthesis (MFTS), methanol synthesis, and subsequent transformations of methanol into hydrocarbons (MTH), aromatics (MTA) and olefin oligomerization. The potential of these processes is highlighted, alongside the challenges in catalyst development. The paper emphasizes the need for advanced catalytic processes to achieve high selectivity and stability under industrial conditions, which are critical for the commercial viability of CO2-based SAF production. Ultimately, this work aims to provide a comprehensive overview of the current state of research in SAFs, outlining promising directions for future research.

Hypothesis for Molecular Evolution in the Pre-Cellular Stage of the Origin of Life

Life was originated from inorganic world and had experienced a long period of evolution in about 3.8 billion years. The time for emergence of the pioneer creations on Earth is debatable nowadays, and how the scenario for the prebiotic molecular interactions is still mysterious. Before the spreading of cellular organisms, chemical evolution was perhaps prevailing for millions of years, in which inorganic biosynthesis was ultimately replaced by biochemical reactions. Understanding the major molecular players and their interactions toward cellular life is fundamental for current medical science and extraterrestrial life exploration. In this review, we propose a road map for the primordial molecular evolution in early Earth, which probably occurred adjacent to hydrothermal vents with a strong gradient of organic molecules, temperature, and metal contents. Natural selection of the macromolecules with strong secondary structures and catalytic centers is associated with decreasing of overall entropy of the biopolymers. Our review may shed lights into the important selection of gene-coding RNA with secondary structures from large amounts of random biopolymers and formation of ancient ribosomes with biological machines supporting the basic life processes. Integration of the free environmental ribosomes by the early cellular life as symbiotic molecular machines is probably the earliest symbiosis on Earth.

Carbon dioxide capture, sequestration, and utilization models for carbon management and transformation

The elevated level of carbon dioxide in the atmosphere has become a pressing concern for environmental health due to its contribution to climate change and global warming. Simultaneously, the energy crisis is a significant issue for both developed and developing nations. In response to these challenges, carbon capture, sequestration, and utilization (CCSU) have emerged as promising solutions within the carbon-neutral bioenergy sector. Numerous technologies are available for CCSU including physical, chemical, and biological routes. The aim of this study is to explore the potential of CCSU technologies, specifically focusing on the use of microorganisms based on their well-established metabolic part. By investigating these biological pathways, we aim to develop sustainable strategies for climate management and biofuel production. One of the key novelties of this study lies in the utilization of microorganisms for CO2 fixation and conversion, offering a renewable and efficient method for addressing carbon emissions. Algae, with its high growth rate and lipid contents, exhibits CO2 fixation capabilities during photosynthesis. Similarly, methanogens have shown efficiency in converting CO2 to methane by methanogenesis, offering a viable pathway for carbon sequestration and energy production. In conclusion, our study highlights the importance of exploring biological pathways, which significantly reduce carbon emissions and move towards a more environmentally friendly future. The output of this review highlights the significant potential of CCSU models for future sustainability. Furthermore, this review has been intensified in the current agenda for reduction of CO2 at considerable extends with biofuel upgrading by the microbial-shift reaction.

In-Situ Characterization Techniques for Mechanism Studies of CO2 Hydrogenation

The paramount concerns of global warming, fossil fuel depletion, and energy crises have prompted the need of hydrocarbons productions via CO2 conversion. In order to achieve global carbon neutrality, much attention needs to be diverted towards CO2 management. Catalytic hydrogenation of CO2 is an exciting opportunity to curb the increasing CO2 and produce value-added products. However, the comprehensive understanding of CO2 hydrogenation is still a matter of discussion due to its complex reaction mechanism and involvement of various species. This review comprehensively discusses three processes: reverse water gas shift (RWGS) reaction, modified Fischer Tropsch synthesis (MFTS), and methanol-mediated route (MeOH) for CO2 hydrogenation to hydrocarbons. Along with analysing the reaction pathways, it is also very important to understand the real-time evolvement of catalytic process and reaction intermediates by employing in-situ characterization techniques under actual reaction conditions. Subsequently, in second part of this review, we provided a systematic analysis of advancements in in-situ techniques aimed to monitor the evolution of catalysts during CO2 reduction process. The section also highlights the key components of in-situ cells, their working principles, and applications in identifying reaction mechanisms for CO2 hydrogenation. Finally, by reviewing respective achievements in the field, we identify key gaps and present some future directions for CO2 hydrogenation and in-situ studies.

Light-Induced Dynamic Activation of Copper/Silicon Interface for Highly Selective Carbon Dioxide Reduction

Numerous studies have shown a fact that phase transformation and/or reconstruction are likely to occur and play crucial roles in electrochemical scenarios. Nevertheless, a decisive factor behind the diverse photoelectrochemical activity and selectivity of various copper/silicon photoelectrodes is still largely debated and missing in the community, especially the possibly dynamic behaviors of metal catalyst/semiconductor interface. Herein, through in situ X-ray absorption spectroscopy and transmission electron microscope, a model system of Cu nanocrystals with well-defined facets on black p-type silicon (BSi) is unprecedentedly demonstrated to reveal the dynamic phase transformation of forming irreversible silicide at Cu nanocrystal-BSi interface during photoelectrocatalysis, which is validated to originate from the atomic interdiffusion between Cu and Si driven by light-induced dynamic activation process. Significantly, the adaptive junction at Cu-Si interface is activated by an expansion of interatomic Cu-Cu distance for CO2 electroreduction, which efficiently restricts the C-C coupling pathway but strengthens the bonding with key intermediate of *CHO for CH4 yield, resulting in a remarkable 16-fold improvement in the product ratio of CH4/C2 products and an intriguing selectivity switch. This work offers new insights into dynamic structural transformations of metal/semiconductor junction and design of highly efficient catalysts toward photosynthesis.

Recent Advances Hydrogenation of Carbon Dioxide to Light Olefins over Iron-Based Catalysts via the Fischer-Tropsch Synthesis

The massive burning of fossil fuels has been important for economic and social development, but the increase in the CO2 concentration has seriously affected environmental sustainability. In industrial and agricultural production, light olefins are one of the most important feedstocks. Therefore, the preparation of light olefins by CO2 hydrogenation has been intensively studied, especially for the development of efficient catalysts and for the application in industrial production. Fe-based catalysts are widely used in Fischer-Tropsch synthesis due to their high stability and activity, and they also exhibit excellent catalytic CO2 hydrogenation to light olefins. This paper systematically summarizes and analyzes the reaction mechanism of Fe-based catalysts, alkali and transition metal modifications, interactions between active sites and carriers, the synthesis process, and the effect of the byproduct H2O on catalyst performance. Meanwhile, the challenges to the development of CO2 hydrogenation for light olefin synthesis are presented, and future development opportunities are envisioned.

Long-Chain Hydrocarbons from Nonthermal Plasma-Driven Biogas Upcycling

The burgeoning necessity to discover new methodologies for the synthesis of long-chain hydrocarbons and oxygenates, independent of traditional reliance on high-temperature, high-pressure, and fossil fuel-based carbon, is increasingly urgent. In this context, we introduce a nonthermal plasma-based strategy for the initiation and propagation of long-chain carbon growth from biogas constituents (CO2 and CH4). Utilizing a plasma reactor operating at atmospheric room temperature, our approach facilitates hydrocarbon chain growth up to C40 in the solid state (including oxygenated products), predominantly when CH4 exceeds CO2 in the feedstock. This synthesis is driven by the hydrogenation of CO2 and/or amalgamation of CHx radicals. Global plasma chemistry modeling underscores the pivotal role of electron temperature and CHx radical genesis, contingent upon varying CO2/CH4 ratios in the plasma system. Concomitant with long-chain hydrocarbon production, the system also yields gaseous products, primarily syngas (H2 and CO), as well as liquid-phase alcohols and acids. Our finding demonstrates the feasibility of atmospheric room-temperature synthesis of long-chain hydrocarbons, with the potential for tuning the chain length based on the feed gas composition.

Tailoring MIL-100(Fe)-derived catalyst for controlled carbon dioxide conversion and product selectivity

Here in, we are reporting the effect of the catalyst particle size on the catalytic activity and product selectivity by understanding the strength of the interaction between the active catalyst and the reactants (CO2 and H2). In this regard, two catalytic systems having different active catalyst particle sizes and support surface areas were synthesized using metal-organic frameworks (MOF) (MIL-100(Fe)) having two crystal size ranges as sacrificial templates. The active catalyst having smaller nanoparticles exhibited greater chemisorption of hydrogen (Fe-H bond), resulting in heightened selectivity for paraffin due to hydrogenation of re-adsorbed olefins. Conversely, larger nanoparticles showed enhanced chemisorption of CO2 (Fe-C bond), leading to increased selectivity for olefins (O/P = 0.15). Additionally, a reduction in particle size boosts activity from 24% to 38.7% at 340 °C/20 bar. While, higher particle size enhances the selectivity towards C5+ from 11.1 to 45.6% at (300 °C/10 bar) and 9.6 to 21.3% at (340 °C/20 bar).

Role of Surface Chemistry in Pyrrole Autoxidation

Chemical compounds in liquid hydrocarbon fuels that contain five-membered pyrrole (Py) rings readily react with oxygen from air and polymerize through a process known as autoxidation. Autoxidation degrades the quality of fuel and leads to the formation of unwanted gum deposits in fuel storage vessels and engine components. Recent work has found that the rate of formation of these gum deposits is affected by material surfaces exposed to the fuel, but the origins of these effects are not yet understood. In this work, atomic layer deposition (ALD) is employed to grow aluminum oxide, zinc oxide, titanium dioxide, and manganese oxide films on silicon substrates to control material surface chemistry and study Py adsorption and gum nucleation on these surfaces. Quartz crystal microbalance (QCM) studies of gas-phase Py adsorption indicate 1.5-2.8 kcal/mol exergonic adsorption of Lewis basic Py onto Lewis acidic surface sites. More favorable Py adsorption onto Lewis acidic surfaces correlates with faster polypyrrole (PPy) film nucleation in vapor phase oxidative molecular deposition (oMLD) polymerization studies. Liquid-phase studies of Py autoxidation reveal primarily particulate formation, indicating a homogeneous PPy propagation step rather than a completely surface-based polymerization mechanism. The amount of PPy particulate formation is positively correlated with more acidic surfaces (lower pH-PZC values), indicating that the rate-limiting step for Py autoxidation involves Lewis acidic surface sites. These studies help to establish new mechanistic insights into the role of surface chemistry in the autoxidation of pyrrolic species. We apply this knowledge to demonstrate a polymer coating formed by vapor phase polymer deposition that slows autoxidation by 2 orders of magnitude.

Silver Nanoparticle-Functionalized Postsynthetically Modified Thiol MOF UiO-66-NH-SH for Efficient CO2 Fixation

Thiols are essential functional groups imparting unique properties, such as reactivity and selectivity, to many vital enzymes and biomolecules. The integration of electronically soft thiol groups within metal-organic frameworks (MOFs) yields elevated reactivity and a pronounced affinity for soft metal ions. However, the scarcity of thiol-based ligands and synthetic challenges hinder the advancement of thiol-based MOFs. To bypass the difficulties of synthesizing thiol MOFs by a direct reaction between thiol-based ligands and corresponding metal salts, postsynthetic modification (PSM) of MOFs is an efficient strategy to introduce thiol functionality. Herein, we have introduced Ag nanoparticles in postsynthetically modified thiol MOFs UiO-66-NH-SH (1) (synthesized by reaction between UiO-66-NH2 and thioglycolic acid) and UiO-66-NH-SH (2) (synthesized by reaction between UiO-66-NH2 and 3-mercaptopropionic acid) to synthesize a series of heterogeneous catalysts for CO2 fixation. Catalysts Cat 1-2 and Cat 3 - 4 were synthesized from UiO-66-NH-SH (1) and UiO-66-NH-SH (2), respectively, by using varying concentrations of silver (AgNO3). Catalyst Ag@UiO-66-NH-SH (1) (Ag = 3.45%; namely Cat 2) shows the highest efficiency for the catalytic conversion of propargylic alcohol and terminal epoxide to the corresponding cyclic carbonates. Finally, a rationalized reaction mechanism is proposed by correlating our results with the current literature. This work presents a viable strategy to utilize the thiol functionality of MOFs (avoiding the complexities associated with synthesizing thiol MOFs directly from thiol ligands) as a platform for introducing catalytically active metal centers and applying them as a heterogeneous catalyst for CO2 fixation reactions.

Novel heterogeneous Fe-based catalysts for carbon dioxide hydrogenation to long chain α-olefins-A review

The thermocatalytic conversion of carbon dioxide (CO2) into high value-added chemicals provides a strategy to address the environmental problems caused by excessive carbon emissions and the sustainable production of chemicals. Significant progress has been made in the CO2 hydrogenation to long chain α-olefins, but controlling C-O activation and C-C coupling remains a great challenge. This review focuses on the recent advances in catalyst design concepts for the synthesis of long chain α-olefins from CO2 hydrogenation. We have systematically summarized and analyzed the ingenious design of catalysts, reaction mechanisms, the interaction between active sites and supports, structure-activity relationship, influence of reaction process parameters on catalyst performance, and catalyst stability, as well as the regeneration methods. Meanwhile, the challenges in the development of the long chain α-olefins synthesis from CO2 hydrogenation are proposed, and the future development opportunities are prospected. The aim of this review is to provide a comprehensive perspective on long chain α-olefins synthesis from CO2 hydrogenation to inspire the invention of novel catalysts and accelerate the development of this process.

Tailoring the CO2 Hydrogenation Performance of Fe-Based Catalyst via Unique Confinement Effect of the Carbon Shell

Even though Fe-based catalysts have been widely employed for CO2 hydrogenation into hydrocarbons, oxygenates, liquid fuels, etc., the precise regulation of their physicochemical properties is needed to enhance the catalytic performance. Herein, under the guidance of the traditional concept in heterogeneous catalysis-confinement effect, a core-shell structured catalyst Na-Fe3 O4 @C is constructed to boost the CO2 hydrogenation performance. Benefiting from the carbon-chain growth limitation, tailorable H2 /CO2 ratio on the catalytic interface, and unique electronic property that all endowed by the confinement effect, the selectivity and space-time yield of light olefins (C2 = -C4 = ) are as high as 47.4 % and 15.9 g molFe -1  h-1 , respectively, which are all notably higher than that from the shell-less counterpart. The function mechanism of the confinement effect in Fe-based catalysts are clarified in detail by multiple characterization and density functional theory (DFT). This work may offer a new prospect for the rational design of CO2 hydrogenation catalyst.

Carbon-Based Electron Buffer Layer on ZnOx -Fe5 C2 -Fe3 O4 Boosts Ethanol Synthesis from CO2 Hydrogenation

The conversion of CO2 into ethanol with renewable H2 has attracted tremendous attention due to its integrated functions of carbon elimination and chemical synthesis, but remains challenging. The electronic properties of a catalyst are essential to determine the adsorption strength and configuration of the key intermediates, therefore altering the reaction network for targeted synthesis. Herein, we describe a catalytic system in which a carbon buffer layer is employed to tailor the electronic properties of the ternary ZnOx -Fe5 C2 -Fe3 O4 , in which the electron-transfer pathway (ZnOx →Fe species or carbon layer) ensures the appropriate adsorption strength of -CO* on the catalytic interface, facilitating C-C coupling between -CHx * and -CO* for ethanol synthesis. Benefiting from this unique electron-transfer buffering effect, an extremely high ethanol yield of 366.6 gEtOH  kgcat -1  h-1 (with CO of 10 vol % co-feeding) is achieved from CO2 hydrogenation. This work provides a powerful electronic modulation strategy for catalyst design in terms of highly oriented synthesis.

Bioelectrocatalytic CO2 Reduction by Mo-Dependent Formylmethanofuran Dehydrogenase

Massive efforts are invested in developing innovative CO2 -sequestration strategies to counter climate change and transform CO2 into higher-value products. CO2 -capture by reduction is a chemical challenge, and attention is turned toward biological systems that selectively and efficiently catalyse this reaction under mild conditions and in aqueous solvents. While a few reports have evaluated the effectiveness of isolated bacterial formate dehydrogenases as catalysts for the reversible electrochemical reduction of CO2 , it is imperative to explore other enzymes among the natural reservoir of potential models that might exhibit higher turnover rates or preferential directionality for the reductive reaction. Here, we present electroenzymatic catalysis of formylmethanofuran dehydrogenase, a CO2 -reducing-and-fixing biomachinery isolated from a thermophilic methanogen, which was deposited on a graphite rod electrode to enable direct electron transfer for electroenzymatic CO2 reduction. The gas is reduced with a high Faradaic efficiency (109±1 %), where a low affinity for formate prevents its electrochemical reoxidation and favours formate accumulation. These properties make the enzyme an excellent tool for electroenzymatic CO2 -fixation and inspiration for protein engineering that would be beneficial for biotechnological purposes to convert the greenhouse gas into stable formate that can subsequently be safely stored, transported, and used for power generation without energy loss.

The potential of CO2-based production cycles in biotechnology to fight the climate crisis

Rising CO2 emissions have pushed scientists to develop new technologies for a more sustainable bio-based economy. Microbial conversion of CO2 and CO2-derived carbon substrates into valuable compounds can contribute to carbon neutrality and sustainability. Here, we discuss the potential of C1 carbon sources as raw materials to produce energy, materials, and food and feed using microbial cell factories. We provide an overview of potential microbes, natural and synthetic C1 utilization pathways, and compare their metabolic driving forces. Finally, we sketch a future in which C1 substrates replace traditional feedstocks and we evaluate the costs associated with such an endeavor.

Synthesis of Liquid Hydrocarbon via Direct Hydrogenation of CO2 over FeCu-Based Bifunctional Catalyst Derived from Layered Double Hydroxides

Here, we report a Na-promoted FeCu-based catalyst with excellent liquid hydrocarbon selectivity and catalytic activity. The physiochemical properties of the catalysts were comprehensively characterized by various characterization techniques. The characterization results indicate that the catalytic performance of the catalysts was closely related to the nature of the metal promoters. The Na-AlFeCu possessed the highest CO2 conversion due to enhanced CO2 adsorption of the catalysts by the introduction of Al species. The introduction of excess Mg promoter led to a strong methanation activity of the catalyst. Mn and Ga promoters exhibited high selectivity for light hydrocarbons due to their inhibition of iron carbides generation, resulting in a lack of chain growth capacity. The Na-ZnFeCu catalyst exhibited the optimal C5+ yield, owing to the fact that the Zn promoter improved the catalytic activity and liquid hydrocarbon selectivity by modulating the surface CO2 adsorption and carbide content. Carbon dioxide (CO2) hydrogenation to liquid fuel is considered a method for the utilization and conversion of CO2, whereas satisfactory activity and selectivity remains a challenge. This method provides a new idea for the catalytic hydrogenation of CO2 and from there the preparation of high-value-added products.

Genome-wide identification, classification, and expression analysis of heat shock transcription factor family in switchgrass (Panicum virgatum L.)

Switchgrass is one of the most promising bioenergy crops and is generally cultivated in arid climates and poor soils. Heat shock transcription factors (Hsfs) are key regulators of plant responses to abiotic and biotic stressors. However, their role and mechanism of action in switchgrass have not been elucidated. Hence, this study aimed to identify the Hsf family in switchgrass and understand its functional role in heat stress signal transduction and heat tolerance by using bioinformatics and RT-PCR analysis. Forty-eight PvHsfs were identified and divided into three main classes based on their gene structure and phylogenetic relationships: HsfA, HsfB, and HsfC. The results of the bioinformatics analysis showed a DNA-binding domain (DBD) at the N-terminal in PvHsfs, and they were not evenly distributed on all chromosomes except for chromosomes 8 N and 8 K. Many cis-elements related to plant development, stress responses, and plant hormones were identified in the promoter sequence of each PvHsf. Segmental duplication is the primary force underlying Hsf family expansion in switchgrass. The results of the expression pattern of PvHsfs in response to heat stress showed that PvHsf03 and PvHsf25 might play critical roles in the early and late stages of switchgrass response to heat stress, respectively, and HsfB mainly showed a negative response to heat stress. Ectopic expression of PvHsf03 in Arabidopsis significantly increased the heat resistance of seedlings. Overall, our research lays a notable foundation for studying the regulatory network in response to deleterious environments and for further excavating tolerance genes in switchgrass.

Electrochemical Promotion of CO2 Hydrogenation Using a Pt/YSZ Fuel Cell Type Reactor

The hydrogenation of CO₂ is a reaction of key technological and environmental importance, as it contributes to the sustainable production of fuels while assisting in the reduction of a major greenhouse gas. The reaction has received substantial attention over the years within the catalysis and electrocatalysis communities. In this respect, the electrochemical promotion of catalysis (EPOC) has been applied successfully to the CO₂ hydrogenation reaction to improve the catalytic activity and selectivity of conductive films supported on solid electrolytes. However, designing an effective electrocatalytic reactor remains a challenge due to the connections required between the electrodes and the external potentiostat/galvanostat. This drawback could be alleviated if the catalytic reaction occurs in a reactor that simultaneously operates as a power generator. In this work, the Electrochemical Promotion of the CO₂ hydrogenation reaction in a low-temperature solid oxide electrolyte fuel cell (SOFC) reactor is studied using yttria-stabilized zirconia (YSZ) and a platinum (Pt) electrode catalyst. The system has been studied in two distinct operation modes: (i) when the necessary energy for the electrochemical promotion is produced through the parallel reaction of H₂ oxidation (galvanic operation) and (ii) when a galvanostat/potentiostat is used to impose the necessary potential (electrolytic operation). The performance of the fuel cell declines less than 15% in the presence of the reactant mixture (CO₂ and H₂) while producing enough current to conduct EPOC experiments. During the electrolytic operation of the electrochemical cell, the CO production rate is significantly increased by up to 50%.

Nanoreactor Engineering Can Unlock New Possibilities for CO2 Tandem Catalytic Conversion to C-C Coupled Products

Climate change is becoming increasingly more pronounced every day while the amount of greenhouse gases in the atmosphere continues to rise. CO2 reduction to valuable chemicals is an approach that has gathered substantial attention as a means to recycle these gases. Herein, some of the tandem catalysis approaches that can be used to achieve the transformation of CO2 to C-C coupled products are explored, focusing especially on tandem catalytic schemes where there is a big opportunity to improve performance by designing effective catalytic nanoreactors. Recent reviews have highlighted the technical challenges and opportunities for advancing tandem catalysis, especially highlighting the need for elucidating structure-activity relationships and mechanisms of reaction through theoretical and in situ/operando characterization techniques. In this review, the focus is on nanoreactor synthesis strategies as a critical research direction, and discusses these in the context of two main tandem pathways (CO-mediated pathway and Methanol-mediated pathway) to C-C coupled products.

Toward combined photobiological-photochemical formation of kerosene-type biofuels: which small 1,3-diene photodimerizes most efficiently?

A transition from fossil- to bio-based hydrocarbon fuels is required to reduce greenhouse gas emissions; yet, traditional biomass cultivation for biofuel production competes with food production and impacts negatively on biodiversity. Recently, we reported a proof-of-principle study of a two-step photobiological-photochemical approach to kerosene biofuels in which a volatile hydrocarbon (isoprene) is produced by photosynthetic cyanobacteria, followed by its photochemical dimerization into C₁₀ hydrocarbons. Both steps can utilize solar irradiation. Here, we report the triplet state (T₁)-sensitized photodimerization of a broader set of small 1,3-dienes to identify which structural features lead to rapid photodimerization. Neat 1,3-cyclohexadiene gave the highest yield (93%) after 24 h of irradiation at 365 nm, followed by isoprene (66%). The long triplet lifetime of 1,3-cyclohexadiene, which is two orders of magnitude longer than those of acyclic dienes, is key to its high photoreactivity and stem from its planar T₁ state structure. In contrast, while isoprene is conformationally flexible, it has both photochemical and photobiological advantages, as it is the most reactive among the volatile 1,3-dienes and it can be produced by cyanobacteria. Finally, we explored the influence of solvent viscosity, diene concentration, and triplet sensitizer loading on the photodimerization, with a focus on conditions that are amenable when the dienes are produced photobiologically. Our findings should be useful for the further development of the two-step photobiological-photochemical approach to kerosene biofuels.

Combustion, Chemistry, and Carbon Neutrality

Combustion is a reactive oxidation process that releases energy bound in chemical compounds used as fuels─energy that is needed for power generation, transportation, heating, and industrial purposes. Because of greenhouse gas and local pollutant emissions associated with fossil fuels, combustion science and applications are challenged to abandon conventional pathways and to adapt toward the demand of future carbon neutrality. For the design of efficient, low-emission processes, understanding the details of the relevant chemical transformations is essential. Comprehensive knowledge gained from decades of fossil-fuel combustion research includes general principles for establishing and validating reaction mechanisms and process models, relying on both theory and experiments with a suite of analytic monitoring and sensing techniques. Such knowledge can be advantageously applied and extended to configure, analyze, and control new systems using different, nonfossil, potentially zero-carbon fuels. Understanding the impact of combustion and its links with chemistry needs some background. The introduction therefore combines information on exemplary cultural and technological achievements using combustion and on nature and effects of combustion emissions. Subsequently, the methodology of combustion chemistry research is described. A major part is devoted to fuels, followed by a discussion of selected combustion applications, illustrating the chemical information needed for the future.

Light-independent anaerobic microbial oxidation of manganese driven by an electrosyntrophic coculture

Anaerobic microbial manganese oxidation (AMMO) has been considered an ancient biological metabolism for Mn element cycling on Archaean Earth before the presence of oxygen. A light-dependent AMMO was recently observed under strictly anoxic conditions, providing a new proxy for the interpretation of the evolution of oxygenic photosynthesis. However, the feasibility of biotic Mn(II) oxidation in dark geological habitats that must have been abundant remains unknown. Therefore, we discovered that it would be possible to achieve AMMO in a light-independent electrosyntrophic coculture between Rhodopseudomonas palustris and Geobacter metallireducens. Transmission electron microscopy analysis revealed insoluble particle formation in the coculture with Mn(II) addition. X-ray diffraction and X-ray photoelectron spectroscopy analysis verified that these particles were a mixture of MnO2 and Mn3O4. The absence of Mn oxides in either of the monocultures indicated that the Mn(II)-oxidizing activity was induced via electrosyntrophic interactions. Radical quenching and isotopic experiments demonstrated that hydroxyl radicals (•OH) produced from H2O dissociation by R. palustris in the coculture contributed to Mn(II) oxidation. All these findings suggest a new, symbiosis-dependent and light-independent AMMO route, with potential importance to the evolution of oxygenic photosynthesis and the biogeochemical cycling of manganese on Archaean and modern Earth.

Structure Sensitivity of CO2 Conversion over Nickel Metal Nanoparticles Explained by Micro-Kinetics Simulations

Nickel metal nanoparticles are intensively researched for the catalytic conversion of carbon dioxide. They are commercially explored in the so-called power-to-methane application in which renewably resourced H2 reacts with CO2 to produce CH4, which is better known as the Sabatier reaction. Previous work has shown that this reaction is structure-sensitive. For instance, Ni/SiO2 catalysts reveal a maximum performance when nickel metal nanoparticles of ∼2-3 nm are used. Particularly important to a better understanding of the structure sensitivity of the Sabatier reaction over nickel-based catalysts is to understand all relevant elementary reaction steps over various nickel metal facets because this will tell as to which type of nickel facets and which elementary reaction steps are crucial for designing an efficient nickel-based methanation catalyst. In this work, we have determined by density functional theory (DFT) calculations and micro-kinetics modeling (MKM) simulations that the two terrace facets Ni(111) and Ni(100) and the stepped facet Ni(211) barely show any activity in CO2 methanation. The stepped facet Ni(110) turned out to be the most effective in CO2 methanation. Herein, it was found that the dominant kinetic route corresponds to a combination of the carbide and formate reaction pathways. It was found that the dissociation of H2CO* toward CH2* and O* is the most critical elementary reaction step on this Ni(110) facet. The calculated activity of a range of Wulff-constructed nickel metal nanoparticles, accounting for varying ratios of the different facets and undercoordinated atoms exposed, reveals the same trend of activity-versus-nanoparticle size, as was observed in previous experimental work from our research group, thereby providing an explanation for the structure-sensitive nature of the Sabatier reaction.

High-yield production of liquid fuels in CO2 hydrogenation on a zeolite-free Fe-based catalyst

Catalytic conversion of CO₂ to long-chain hydrocarbons with high activity and selectivity is appealing but hugely challenging. For conventional bifunctional catalysts with zeolite, poor coordination among catalytic activity, CO selectivity and target product selectivity often limit the long-chain hydrocarbon yield. Herein, we constructed a singly cobalt-modified iron-based catalyst achieving 57.8% C₅₊ selectivity at a CO₂ conversion of 50.2%. The C₅₊ yield reaches 26.7%, which is a record-breaking value. Co promotes the reduction and strengthens the interaction between raw CO₂ molecules and iron species. In addition to the carbide mechanism path, the existence of Co₃Fe₇ sites can also provide sufficient O-containing intermediate species (CO*, HCOO*, CO₃ ²*, and ) for subsequent chain propagation reaction via the oxygenate mechanism path. Reinforced cascade reactions between the reverse water gas shift (RWGS) reaction and chain propagation are achieved. The improved catalytic performance indicates that the KZFe-5.0Co catalyst could be an ideal candidate for industrial CO₂ hydrogenation catalysts in the future.

A Review on Green Hydrogen Valorization by Heterogeneous Catalytic Hydrogenation of Captured CO2 into Value-Added Products

The catalytic hydrogenation of captured CO2 by different industrial processes allows obtaining liquid biofuels and some chemical products that not only present the interest of being obtained from a very low-cost raw material (CO2) that indeed constitutes an environmental pollution problem but also constitute an energy vector, which can facilitate the storage and transport of very diverse renewable energies. Thus, the combined use of green H2 and captured CO2 to obtain chemical products and biofuels has become attractive for different processes such as power-to-liquids (P2L) and power-to-gas (P2G), which use any renewable power to convert carbon dioxide and water into value-added, synthetic renewable E-fuels and renewable platform molecules, also contributing in an important way to CO2 mitigation. In this regard, there has been an extraordinary increase in the study of supported metal catalysts capable of converting CO2 into synthetic natural gas, according to the Sabatier reaction, or in dimethyl ether, as in power-to-gas processes, as well as in liquid hydrocarbons by the Fischer-Tropsch process, and especially in producing methanol by P2L processes. As a result, the current review aims to provide an overall picture of the most recent research, focusing on the last five years, when research in this field has increased dramatically.

Recent advances and challenges in the bioconversion of acetate to value-added chemicals

Acetate is a major byproduct of the bioconversion of the greenhouse gas carbon dioxide, pretreatment of lignocellulose biomass, and microbial fermentation. The utilization and valorization of acetate have been emphasized in transforming waste to clean energy and value-added platform chemicals, contributing to the development of a closed carbon loop toward a low-carbon circular bio-economy. Acetate has been used to produce several platform chemicals, including succinate, 3-hydroxypropionate, and itaconic acid, highlighting the potential of acetate to synthesize many biochemicals and biofuels. On the other hand, the yields and titers have not reached the theoretical maximum. Recently, recombinant strain development and pathway regulation have been suggested to overcome this limitation. This review provides insights into the important constraints limiting the yields and titers of the biochemical and metabolic pathways of bacteria capable of metabolizing acetate for acetate bioconversion. The current developments in recombinant strain engineering are also discussed.

A review of catalytic hydrogenation of carbon dioxide: From waste to hydrocarbons

With the rapid development of industrial society and humankind’s prosperity, the growing demands of global energy, mainly based on the combustion of hydrocarbon fossil fuels, has become one of the most severe challenges all over the world. It is estimated that fossil fuel consumption continues to grow with an annual increase rate of 1.3%, which has seriously affected the natural environment through the emission of greenhouse gases, most notably carbon dioxide (CO₂). Given these recognized environmental concerns, it is imperative to develop clean technologies for converting captured CO₂ to high-valued chemicals, one of which is value-added hydrocarbons. In this article, environmental effects due to CO₂ emission are discussed and various routes for CO₂ hydrogenation to hydrocarbons including light olefins, fuel oils (gasoline and jet fuel), and aromatics are comprehensively elaborated. Our emphasis is on catalyst development. In addition, we present an outlook that summarizes the research challenges and opportunities associated with the hydrogenation of CO₂ to hydrocarbon products.

Solution combustion synthesis: the relevant metrics for producing advanced and nanostructured photocatalysts

The current developments and progress in energy and environment-related areas pay special attention to the fabrication of advanced nanomaterials via green and sustainable paths to accomplish chemical circularity. The design and preparation methods of photocatalysts play a prime role in determining the structural, surface characteristics and optoelectronic properties of the final products. The solution combustion synthesis (SCS) technique is a relatively novel, cost-effective, and efficient method for the bulk production of nanostructured materials. SCS-fabricated metal oxides are of great technological importance in photocatalytic, environmental and energy applications. To date, the SCS route has been employed to produce a large variety of solid materials such as metals, sulfides, carbides, nitrides and single or complex metal oxides. This review intends to provide a holistic perspective of the different steps involved in the chemistry of SCS of advanced photocatalysts, and pursues several SCS metrics that influence their photocatalytic performances to establish a feasible approach to design advanced photocatalysts. The study highlights the fundamentals of SCS and the importance of various combustion parameters in the characteristics of the fabricated photocatalysts. Consequently, this work deals with the design of a concise framework to link the fine adjustment of SCS parameters for the development of efficient metal oxide photocatalysts for energy and environmental applications.

Hydrogenation of Carbon Dioxide to Value-Added Liquid Fuels and Aromatics over Fe-Based Catalysts Based on the Fischer–Tropsch Synthesis Route

Hydrogenation of CO2 to value-added chemicals and fuels not only effectively alleviates climate change but also reduces over-dependence on fossil fuels. Therefore, much attention has been paid to the chemical conversion of CO2 to value-added products, such as liquid fuels and aromatics. Recently, efficient catalysts have been developed to face the challenge of the chemical inertness of CO2 and the difficulty of C–C coupling. Considering the lack of a detailed summary on hydrogenation of CO2 to liquid fuels and aromatics via the Fischer–Tropsch synthesis (FTS) route, we conducted a comprehensive and systematic review of the research progress on the development of efficient catalysts for hydrogenation of CO2 to liquid fuels and aromatics. In this work, we summarized the factors influencing the catalytic activity and stability of various catalysts, the strategies for optimizing catalytic performance and product distribution, the effects of reaction conditions on catalytic performance, and possible reaction mechanisms for CO2 hydrogenation via the FTS route. Furthermore, we also provided an overview of the challenges and opportunities for future research associated with hydrogenation of CO2 to liquid fuels and aromatics.

Copper ferrite and cobalt oxide two-layer coated macroporous SiC substrate for efficient CO2-splitting and thermochemical energy conversion

CO₂-splitting and thermochemical energy conversion effectiveness are still challenged by the selectivity of metal/metal oxide-based redox materials and associated chemical reaction constraints. This study proposed an interface/substrate engineering approach for improving CO₂-splitting and thermochemical energy conversion through CuFe₂O₄ and Co₃O₄ two-layer coating SiC. The newly prepared material reactive surface area available for gas-solid reactions is characterized by micro-pores CuFe₂O₄ alloy easing inter-layer oxygen micro mass exchanges across a highly stable SiC-Co₃O₄ layer. Through a thermogravimetry analysis, oxidation of the thermally activated oxygen carriers exhibited remarkably CO₂-splitting capacities with a total CO yield of 1919.33 µmol/g at 1300 °C. The further analysis of the material CO₂-splitting performance at the reactor scale resulted in 919.04 mL (788.94 µmol/g) of CO yield with an instantaneous CO production rate of 22.52 mL/min and chemical energy density of 223.37 kJ/kg at 1000 °C isothermal redox cycles. The reaction kinetic behavior indicated activation energy of 30.65 kJ/mol, which suggested faster CO₂ activation and oxidation kinetic on SiC-Co₃O₄-CuFe₂O₄ O-deficit surfaces. The underlying mechanism for the remarkable thermochemical performances was analyzed by combining experiment and density functional theory (DFT) calculations. The significance of exploiting the synergy between CuFe₂O₄ and Co₃O₄ layers and stoichiometric reaction characteristics provided fundamental insights useful for the theoretical modeling and practical application of the solar thermochemical process.

Vacancy engineering of two-dimensional W2N3 nanosheets for efficient CO2 hydrogenation

Peaking carbon emissions and achieving carbon neutrality have become the consensus goal of the international community to solve the environmental problems threatening mankind caused by accumulative greenhouse gases like CO₂. Herein we proposed vacancy engineering of two-dimensional (2D) topological W₂N₃ for efficient CO₂ hydrogenation into high value-added chemicals and fuels. Spherical aberration corrected scanning transmission electron microscopy (Cs-corrected STEM) confirmed a large amount of N vacancies on the catalyst surface, which significantly reduced the energy barrier for the formation of the essential intermediates of *CO and *CHO as revealed by density functional theory (DFT) calculations. Consequently, the highly stable catalyst exhibited efficient CO₂ hydrogenation superior to many previous reports with a maximum CO₂ conversion rate of 24% and a high selectivity of 23% for C₂₊ hydrocarbons. This work provided not only insight into the vacancy-controlled CO₂ hydrogenation mechanism, but also fresh ammunition to bring the remaining potential of 2D topological transition metal nitrides in the field of catalysis.

Using Biomass Gasification Mineral Residue as Catalyst to Produce Light Olefins from CO, CO2 , and H2 Mixtures

Gasification is a process to transform solids, such as agricultural and municipal waste, into gaseous feedstock for making transportation fuels. The so-called coarse solid residue (CSR) that remains after this conversion process is currently discarded as a process solid residue. In the context of transitioning from a linear to a circular society, the feasibility of using the solid process residue from waste gasification as a solid catalyst for light olefin production from CO, CO2 , and H2 mixtures was investigated. This CSR-derived catalyst converted biomass-derived syngas, a H2 -poor mixture of CO, CO2 , H2 , and N2 , into methane (57 %) and C2 -C4 olefins (43 %) at 450 °C and 20 bar. The main active ingredient of CSR was Fe, and it was discovered with operando X-ray diffraction that metallic Fe, present after pre-reduction in H2 , transformed into an Fe carbide phase under reaction conditions. The increased formation of Fe carbides correlated with an increase in CO conversion and olefin selectivity. The presence of alkali elements, such as Na and K, in CSR-derived catalyst increased olefin production as well.