High crystallinity design of Ir-based catalysts drives catalytic reversibility for water electrolysis and fuel cells

Triggering Intrinsic Electrochemical Hydrogen Evolution Activity within Heusler Alloys via Electronegativity-Induced Charge Rearrangement

Heusler alloys have gradually attracted extensive research interests in the electrochemical hydrogen evolution reaction (HER) due to their unique structural features. However, the inherent half-metallic characteristics of them impede their application. Therefore, reasonable tuning the electronic structure of Heusler alloy catalysts is crucial for enhancing their catalytic activity. Here, we modulated the Fe2MnSi Heusler alloy by precisely substituting Mn with Ru using arc melting and prepared Fe2MnxRu1- xSi materials with enhanced HER properties. The incorporation of highly electronegative Ru introduces substantial electronegativity gradients among the metals, prompting a pronounced Ru-induced electron enrichment effect that facilitates significant charge redistribution. This electronic modulation enhances conductivity and fine-tunes the d-band center, ultimately optimizing the hydrogen adsorption energy barrier at the Si active site. As a result, the overpotential at a current density of 10 mA cm-2 is significantly reduced from 525 mV to 19 mV under acidic conditions. This work provides insights into the design of highly efficient HER electrocatalysts and expands the potential applications of Heusler alloys in electrocatalysis.

Oxygen Reduction Allows Morphology-Tunable Copper Nanoparticle Electrodeposition from Aqueous Nanodroplets

Expanding the tunability of metallic nanoparticles in simple and cost-effective manners is essential for developing heterogeneous catalysts needed for the energy conversion systems of the future. Many current methods of switching between different nanoparticle morphologies and compositions include the use of surfactants, pH adjustments or other coreactants. One relatively unexplored and new route to tuning these nanoparticle properties involves taking advantage of the organic phase surrounding the aqueous droplets used in nanodroplet mediated electrodeposition techniques. These aqueous nanodroplets contain metal precursor salts that electrodeposit nanoparticles when they collide with a sufficiently biased electrode. Organic solvents such as 1,2-dichloroethane, known to have relatively high dioxygen solubilities compared to water, may provide an oxygen rich environment at the droplet interface, promoting heterogeneous oxygen reduction. In this work, the oxygen reduction reaction is used in the electrodeposition of copper to tune the resulting nanoparticle morphologies and compositions. These effects are also compared to those in bulk aqueous electrodeposition. The properties of the nanoparticles and the role of oxygen reduction in their synthesis are probed through electrochemical techniques, electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. When only reducing copper at the electrode, the resulting nanoparticles possess a range of cubic and spherical morphologies and multiple copper oxidation states indicative of zerovalent copper and copper oxide nanoparticles. When reducing both copper and oxygen, the electrodeposited nanoparticles possess a distinctive rod-like morphology with oxidation states and atomic ratios indicative of copper hydroxide. The latter nanoparticle morphology and composition was not attainable when copper was electrodeposited from a bulk aqueous solution at the same applied reducing potential. Our results show that one can take advantage of the fundamental electrochemistry taking place at the aqueous|organic|electrode interface to tune key properties of copper nanoparticles.

Isotopic labelling of water reveals the hydrogen transfer route in electrochemical CO2 reduction

Understanding the hydrogenation pathway in electrochemical CO2 reduction is important for controlling product selectivity. The Eley-Rideal mechanism involving proton-coupled electron transfer directly from solvent water is often considered to be the primary hydrogen transfer route. However, in principle, hydrogenation can also occur via the Langmuir-Hinshelwood mechanism using surface-adsorbed *H. Here, by performing CO2 reduction with Cu in H2O-D2O mixtures, we present evidence that the Langmuir-Hinshelwood mechanism is probably the dominant hydrogenation route. From this, we estimate the extent to which each mechanism contributes towards the formation of six important CO2 reduction products. Through computational simulations, we find that the formation of C-H bonds and O-H bonds is governed by the Langmuir-Hinshelwood and Eley-Rideal mechanism, respectively. We also show that promoting the Eley-Rideal pathway could be crucial towards selective multicarbon product formation and suppressing hydrogen evolution. These findings introduce important considerations for the theoretical modelling of CO2 reduction pathways and electrocatalyst design.

Achieving Higher Activity of Acidic Oxygen Evolution Reaction Using an Atomically Thin Layer of IrOx over Co3O4

The development of electrocatalysts with reduced iridium (Ir) loading for the oxygen evolution reaction (OER) is essential to produce low-cost green hydrogen from water electrolysis under acidic conditions. Herein, an atomically thin layer of iridium oxide (IrOx) has been uniformly dispersed onto cobalt oxide (Co3O4) nanocrystals to improve the efficient use of Ir for acidic OER. In situ characterization and theoretical calculations reveal that compared to the conventional IrOx cluster, the atomically thin layer of IrOx shows stronger interaction with the Co3O4 and consequently higher OER activity due to the Ir-O-Co bond formation at the interface. Equally important, the facile synthetic method and the promising activity in the proton exchange membrane water electrolyzer, reaching 1 A cm-2 at 1.7 V with remarkable durability, enable potential scale-up applications. These findings provide a mechanistic understanding for designing active, stable and lower-cost electrocatalysts with well-defined structures for acidic OER.

Arrayed metal phosphide heterostructure by Fe doping for robust overall water splitting

Transition metal phosphides (TMPs) show promise in water electrolysis due to their electronic structures, which activate hydrogen/oxygen reaction intermediates. However, TMPs face limitations in catalytic efficiency due to insufficient active sites, poor conductivity, and multiple intermediate steps in water electrolysis. Here, we synthesize a highly efficient bifunctional self-supported electrocatalyst, which consists of an N-doped carbon shell anchored on Fe-doped CoP/Co2P arrays on nickel foam (NC@Fe-CoxP/NF) using hydrothermal and phosphorization techniques. Experimental and theoretical results indicate that the modified morphology, with increased active site density and a tunable electronic structure induced by Fe doping in the CoP/Co2P heterostructure, leads to superior water electrolysis performance. The resulting NC@Fe0.1-CoP/Co2P/NF catalyst exhibits overpotentials of 122 mV for the hydrogen evolution reaction (HER) and 270 mV for the oxygen evolution reaction (OER) at 100 mA cm-2. Furthermore, using NC@Fe0.1-CoP/Co2P/NF as both the cathode and anode in an alkaline electrolyzer enables the cell system to achieve 100 mA cm-2 at a voltage of 1.70 V, while maintaining long-term catalytic durability. This work may pave the way for designing self-supported, highly efficient electrocatalysts for practical water electrolysis applications.

An oxycarbide-derived-carbon supported nickel ferrite/copper tungstate ternary composite for enhanced electrocatalytic activity towards the oxygen evolution reaction

This work integrates a unique porous carbon with a binary heterostructured NiFe2O4/CuWO4 composite to enhance electrocatalytic activity towards the oxygen evolution reaction. The NiFe2O4/CuWO4 binary heterostructure was prepared through the conventional co-precipitation method. The porous carbon with turbostratic order was obtained by the selective etching of SiO2 nanodomains from preceramic polymer-derived SiOC. Finally, an optimum ternary NiFe2O4/CuWO4/C composite was prepared through hydrothermal treatment. Microstructural findings reveal that NiFe2O4/CuWO4 nanocomposite particulates are distributed homogeneously within the porous carbon matrix. Electrochemical findings reveal that the optimum composite with uniform carbon distribution requires an overpotential of 360 mV to attain a current density of 10 mA cm-2 with the lowest Tafel slope of 43 mV dec-1 as opposed to 450 mV and 55 mV dec-1, respectively, for the composites without carbon. The ternary composite demonstrated a stable potential over a prolonged period of 24 hours with enhanced mass activity. The improved electrocatalytic efficiency of the material is attributed to the presence of graphitic carbon and ample porosity within the additive carbon phase, which enhances the catalyst-electrolyte interaction interface area and electronic conductivity.

Unconventional Hexagonal Close-Packed High-Entropy Alloy Surfaces Synergistically Accelerate Alkaline Hydrogen Evolution

Accelerating the alkaline hydrogen evolution reaction (HER), which involves the slow cleavage of HO-H bonds and the adsorption/desorption of hydrogen (H*) and hydroxyl (OH*) intermediates, requires developing catalysts with optimal binding strengths for these intermediates. Here, the unconventional hexagonal close-packed (HCP) high-entropy alloy (HEA) atomic layers are prepared composed of five platinum-group metals to enhance the alkaline HER synergistically. The breakthrough is made by layer-by-layer heteroepitaxial deposition of subnanometer RuRhPdPtIr HEA layers on the HCP Ru seeds, despite the thermodynamic stability of Rh, Pd, Pt, and Ir in a face-centered cubic (FCC) structure except for Ru. The synchrotron X-ray absorption spectroscopy (XAS) confirms the atomic mixing and coordination environment of HCP RuRhPdPtIr HEA. Most importantly, they exhibit notable improvements in both electrocatalytic activity and durability for the HER in an alkaline environment, as compared to their FCC RuRhPdPtIr counterparts. Electrochemical measurements, operando XAS analysis, and density functional theory unveil that the binding strengths of H* and OH* intermediates on the active Pt and Ir sites can be weakened and strengthened to a moderate level, respectively, by mixing non-active Ru, Rh, and Pd atoms with Pt and Ir atoms within the HCP HEA with strong synergistic electronic effects.

Crystalline-Amorphous IrOx Supported on Perovskite Nanotubes for pH-Universal OER

Designing catalysts with desirable oxygen evolution reaction (OER) performance under pH-universal conditions is of great significance to promote the development of hydrogen production. Herein, we successfully synthesized a crystalline-amorphous IrOx supported on perovskite oxide nanotubes to obtain IrOx@La0.6Ca0.4Fe0.8Ni0.2O3 with superior OER performance in whole pH media. The overpotential of the IrOx@La0.6Ca0.4Fe0.8Ni0.2O3 catalyst in media of pH 14, 7.2, and 1 has been demonstrated to be 120, 400, and 143 mV, respectively, with no significant element dissolution as well as double-layer capacitance decay after the durability test. Through comparative experiments with IrOx@CNT and the physical mixture of IrOx and La0.6Ca0.4Fe0.8Ni0.2O3, it is found that the strong metal-support interaction (SMSI) in IrOx@La0.6Ca0.4Fe0.8Ni0.2O3 makes IrOx exist in an amorphous state rich in Ir3+, which is closely associated with the surface-active species Ir-OH. Through the regulation of Ir by a perovskite oxide support at the heterointerface, the reaction breaks through the limitation of the adsorbate evolution mechanism (AEM) and converts to a lattice-oxygen-mediated mechanism (LOM), which was fully demonstrated by the addition of the probe tetramethylammonium cation (TMA+), a LOM reaction intermediate, to the electrolyte. This work fills the research gap of perovskite oxide supported Ir-based catalysts with heterogeneous structures, providing an excellent strategy for the structural design of efficient pH-universal OER catalysts for hydrogen production systems.

Scalable Solid-State Synthesis of Carbon-Supported Ir Electrocatalysts for Acidic Oxygen Evolution Reaction: Exploring the Structure-Activity Relationship

Enhancing iridium (Ir)-based electrocatalysts to achieve high activity and robust durability for the oxygen evolution reaction (OER) in acidic environments has been an ongoing mission in the commercialization of proton exchange membrane (PEM) electrolyzers. In this study, we present the synthesis of carbon-supported Ir nanoparticles (NPs) using a modified impregnation method followed by solid-state reduction, with Ir loadings of 20 and 40 wt % on carbon. Among the catalysts, the sample with an Ir loading of 20 wt % synthesized at 1000 °C with a heating rate of 300 °C/h demonstrated the highest mass-normalized OER performance of 1209 A gIr-1 and an OER current retention of 80% after 1000 cycles of cyclic voltammetry (CV). High-resolution STEM images confirmed the uniform dispersion of NPs, with diameters of 1.6 ± 0.4 nm across the support. XPS analysis revealed that the C-O and C═O peaks shifted slightly toward higher binding energies for the best-performing catalyst. In comparison, the metallic Ir state shifted toward lower binding energies compared to other samples. This suggests electron transfer from the carbon support to the Ir NPs, indicating a potential interaction between the catalyst and the support. This work underscores the strong potential of the solid-state method for the scalable synthesis of supported Ir catalysts.

Atomic Molybdenum Nanomaterials for Electrocatalysis

As a sustainable energy technology, electrocatalytic energy conversion requires electrocatalysts, which greatly motivates the exploitation of high-performance electrocatalysts based on nonprecious metals. Molybdenum-based nanomaterials have demonstrated promise as electrocatalysts because of their unique physiochemical and electronic properties. Among them, atomic Mo catalysts, also called Mo-based single-atom catalysts (Mo-SACs), have the most accessible active sites and tunable microenvironments and are thrivingly explored in various electrochemical conversion reactions. A timely review of such rapidly developing topics is necessary to provide guidance for further exploration of optimized Mo-SACs toward electrochemical energy technologies. In this review, recent advances in the synthetic strategies for Mo-SACs are highlighted, focusing on the microenvironment engineering of Mo atoms. Then, the representative achievements of their applications in various electrocatalytic reactions involving the N2, H2O, and CO2 cycles are summarized by combining experimental and computational results. Finally, prospects for the future development of Mo-SACs in electrocatalysis are provided and the key challenges that require further investigation and optimization are highlighted.

Atomic-Layer IrOx Enabling Ligand Effect Boosts Water Oxidation Electrocatalysis

An in situ formed IrOx (x ≤ 2) layer driven by anodic bias serves as the essential active site of Ir-based materials for oxygen evolution reaction (OER) electrocatalysis. Once being confined to atomic thickness, such an IrOx layer possesses both a favorable ligand effect and maximized active Ir sites with a lower O-coordination number. However, limited by a poor understanding of surface reconstruction dynamics, obtaining atomic layers of IrOx remains experimentally challenging. Herein, we report an idea of material design using intermetallic IrVMn nanoparticles to induce in situ formation of an ultrathin IrOx layer (O-IrVMn/IrOx) to enable the ligand effect for achieving superior OER electrocatalysis. Theoretical calculations predict that a strong electronic interaction originating from an orderly atomic arrangement can effectively hamper the excessive leaching of transition metals, minimizing vacancies for oxygen coordination. Linear X-ray absorption near edge spectra analysis, extended X-ray absorption fine structure fitting outcomes, and X-ray photoelectron spectroscopy collectively confirm that Ir is present in lower oxidation states in O-IrVMn/IrOx due to the presence of unsaturated O-coordination. Consequently, the O-IrVMn/IrOx delivers excellent acidic OER performances with an overpotential of only 279 mV at 10 mA cm-2 and a high mass activity of 2.3 A mg-1 at 1.53 V (vs RHE), exceeding most Ir-based catalysts reported. Moreover, O-IrVMn/IrOx also showed excellent catalytic stability with only 0.05 at. % Ir dissolution under electrochemical oxidation, much lower than that of disordered D-IrVMn/IrOx (0.20 at. %). Density functional theory calculations unravel that the intensified ligand effect optimizes the adsorption energies of multiple intermediates involved in the OER and stabilizes the as-formed catalytic IrOx layer.

Advancing electrocatalytic reactions through mapping key intermediates to active sites via descriptors

Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.

Rapid Defect Engineering in FeCoNi/FeAl2O4 Hybrid for Enhanced Oxygen Evolution Catalysis: A Pathway to High-Performance Electrocatalysts

Rational modulation of surface reconstruction in the oxygen evolution reaction (OER) utilizing defect engineering to form efficient catalytic activity centers is a topical interest in the field of catalysis. The introduction of point defects has been demonstrated to be an effective strategy to regulate the electronic configuration of electrocatalysts, but the influence of more complex planar defects (e.g., twins and stacking faults), on their intrinsic activity is still not fully understood. This study harnesses ultrasonic cavitation for rapid and controlled introduction of different types of defects in the FeCoNi/FeAl2O4 hybrid coating, optimizing OER catalytic activity. Theoretical calculations and experiments demonstrate that the different defects optimize the coordination environment and facilitate the activation of surface reconstruction into true catalytic activity centers at lower potentials. Moreover, it demonstrates exceptional durability, maintaining stable oxygen production at a high current density of 300 mA cm-2 for over 120 hours. This work not only presents a novel pathway for designing advanced electrocatalysts but also deepens our understanding of defect-engineered catalytic mechanisms, showcasing the potential for rapid and efficient enhancement of electrocatalytic performance.

Iridium-Based Alkaline Hydrogen Oxidation Reaction Electrocatalysts

The hydroxide exchange membrane fuel cells (HEMFCs) are promising but lack of high-performance anode hydrogen oxidation reaction (HOR) electrocatalysts. The platinum group metals (PGMs) have the HOR activity in alkaline medium two to three orders of magnitude lower than those in acid, leading to the high required PGMs amount on anode to achieve high HEMFC performance. The mechanism study demonstrates the hydrogen binding energy of the catalyst determines the alkaline HOR kinetics, and the adsorbed OH and water on the catalyst surface promotes HOR. Iridium (Ir) has a unique advantage for alkaline HOR due to its similar hydrogen binding energy to Pt and enhanced adsorption of OH. However, the HOR activity of Ir/C is still unsatisfied in practical HEMFC applications. Further fine tuning the adsorption of the intermediate on Ir-based catalysts is of great significance to improve their alkaline HOR activity, which can be reasonably realized by structure design and composition regulation. In this concept, we address the current understanding about the alkaline HOR mechanism and summarize recent advances of Ir-based electrocatalysts with enhanced alkaline HOR activity. We also discuss the perspectives and challenges on Ir-based electrocatalysts in the future.

Recent development and applications of differential electrochemical mass spectrometry in emerging energy conversion and storage solutions

Electrochemical energy conversion and storage are playing an increasingly important role in shaping the sustainable future. Differential electrochemical mass spectrometry (DEMS) offers an operando and cost-effective tool to monitor the evolution of gaseous/volatile intermediates and products during these processes. It can deliver potential-, time-, mass- and space-resolved signals which facilitate the understanding of reaction kinetics. In this review, we show the latest developments and applications of DEMS in various energy-related electrochemical reactions from three distinct perspectives. (I) What is DEMS addresses the working principles and key components of DEMS, highlighting the new and distinct instrumental configurations for different applications. (II) How to use DEMS tackles practical matters including the electrochemical test protocols, quantification of both potential and mass signals, and error analysis. (III) Where to apply DEMS is the focus of this review, dealing with concrete examples and unique values of DEMS studies in both energy conversion applications (CO2 reduction, water electrolysis, carbon corrosion, N-related catalysis, electrosynthesis, fuel cells, photo-electrocatalysis and beyond) and energy storage applications (Li-ion batteries and beyond, metal-air batteries, supercapacitors and flow batteries). The recent development of DEMS-hyphenated techniques and the outlook of the DEMS technique are discussed at the end. As DEMS celebrates its 40th anniversary in 2024, we hope this review can offer electrochemistry researchers a comprehensive understanding of the latest developments of DEMS and will inspire them to tackle emerging scientific questions using DEMS.

Atomically dispersed Iridium on Mo2C as an efficient and stable alkaline hydrogen oxidation reaction catalyst

Hydroxide exchange membrane fuel cells (HEMFCs) have the advantages of using cost-effective materials, but hindered by the sluggish anodic hydrogen oxidation reaction (HOR) kinetics. Here, we report an atomically dispersed Ir on Mo2C nanoparticles supported on carbon (IrSA-Mo2C/C) as highly active and stable HOR catalysts. The specific exchange current density of IrSA-Mo2C/C is 4.1 mA cm-2ECSA, which is 10 times that of Ir/C. Negligible decay is observed after 30,000-cycle accelerated stability test. Theoretical calculations suggest the high HOR activity is attributed to the unique Mo2C substrate, which makes the Ir sites with optimized H binding and also provides enhanced OH binding sites. By using a low loading (0.05 mgIr cm-2) of IrSA-Mo2C/C as anode, the fabricated HEMFC can deliver a high peak power density of 1.64 W cm-2. This work illustrates that atomically dispersed precious metal on carbides may be a promising strategy for high performance HEMFCs.

Designing Efficient Non-Precious Metal Electrocatalysts for High-Performance Hydrogen Production: A Comprehensive Evaluation Strategy

Developing abundant Earth-element and high-efficient electrocatalysts for hydrogen production is crucial in effectively reducing the cost of green hydrogen production. Herein, a strategy by comprehensively considering the computational chemical indicators for H* adsorption/desorption and dehydrogenation kinetics to evaluate the hydrogen evolution performance of electrocatalysts is proposed. Guided by the proposed strategy, a series of catalysts are constructed through a dual transition metal doping strategy. Density Functional Theory (DFT) calculations and experimental chemistry demonstrate that cobalt-vanadium co-doped Ni3N is an exceptionally ideal catalyst for hydrogen production from electrolyzed alkaline water. Specifically, Co,V-Ni3N requires only 10 and 41 mV in alkaline electrolytes and alkaline seawater, respectively, to achieve a hydrogen evolution current density of 10 mA cm-2. Moreover, it can operate steadily at a large industrial current density of 500 mA cm-2 for extended periods. Importantly, this evaluation strategy is extended to single-metal-doped Ni3N and found that it still exhibits significant universality. This study not only presents an efficient non-precious metal-based electrocatalyst for water/seawater electrolysis but also provides a significant strategy for the design of high-performance catalysts of electrolyzed water.

Ir-Sn pair-site triggers key oxygen radical intermediate for efficient acidic water oxidation

The anode corrosion induced by the harsh acidic and oxidative environment greatly restricts the lifespan of catalysts. Here, we propose an antioxidation strategy to mitigate Ir dissolution by triggering strong electronic interaction via elaborately constructing a heterostructured Ir-Sn pair-site catalyst. The formation of Ir-Sn dual-site at the heterointerface and the resulting strong electronic interactions considerably reduce d-band holes of Ir species during both the synthesis and the oxygen evolution reaction processes and suppress their overoxidation, enabling the catalyst with substantially boosted corrosion resistance. Consequently, the optimized catalyst exhibits a high mass activity of 4.4 A mgIr-1 at an overpotential of 320 mV and outstanding long-term stability. A proton-exchange-membrane water electrolyzer using this catalyst delivers a current density of 2 A cm-2 at 1.711 V and low degradation in an accelerated aging test. Theoretical calculations unravel that the oxygen radicals induced by the π* interaction between Ir 5d-O 2p might be responsible for the boosted activity and durability.

Morphological and Coordination Modulations in Iridium Electrocatalyst for Robust and Stable Acidic OER Catalysis

Proton exchange membrane water splitting (PEMWS) technology has high-level current density, high operating pressure, small electrolyzer-size, integrity, flexibility, and has good adaptability to the volatility of wind power and photovoltaics, but the development of both active and high stability of the anode electrocatalyst in acidic environment is still a huge challenge, which seriously hinders the promotion and application of PEMWS. In recent years, researchers have made tremendous attempts in the development of high-quality active anode electrocatalyst, and we summarize some of the research progress made by our group in the design and synthesis of PEMWS anode electrocatalysts with different nanostructures, and makes full use of electrocatalytic activity points to increase the inherent activity of Iridium (Ir) sites, and provides optimization strategies for the long-term non-decay of catalysts under high anode potential in acidic environments. At this stage, these research advances are expected to facilitate the research and technological progress of PEMWS, and providing some research ideas and references for future research on efficient and inexpensive PEMWS anode electrocatalysts.

Design and Synthesis of Noble Metal-Based Alloy Electrocatalysts and Their Application in Hydrogen Evolution Reaction

Hydrogen energy is regarded as the ultimate energy source for future human society, and the preparation of hydrogen from water electrolysis is recognized as the most ideal way. One of the key factors to achieve large-scale hydrogen production by water splitting is the availability of highly active and stable electrocatalysts. Although non-precious metal electrocatalysts have made great strides in recent years, the best hydrogen evolution reaction (HER) electrocatalysts are still based on noble metals. Therefore, it is particularly important to improve the overall activity of the electrocatalysts while reducing the noble metals load. Alloying strategies can shoulder the burden of optimizing electrocatalysts cost and improving electrocatalysts performance. With this in mind, recent work on the application of noble metal-based alloy electrocatalysts in the field of hydrogen production from water electrolysis is summarized. In this review, first, the mechanism of HER is described; then, the current development of synthesis methods for alloy electrocatalysts is presented; finally, an example analysis of practical application studies on alloy electrocatalysts in hydrogen production is presented. In addition, at the end of this review, the prospects, opportunities, and challenges facing noble metal-based alloy electrocatalysts are tried to discuss.

Self-Optimized Ligand Effect of Single-Atom Modifier in Ternary Pt-Based Alloy for Efficient Hydrogen Oxidation

Modifying the atomic and electronic structure of platinum-based alloy to enhance its activity and anti-CO poisoning ability is a vital issue in hydrogen oxidation reaction (HOR). However, the role of foreign modifier metal and the underlying ligand effect is not fully understood. Here, we propose that the ligand effect of single-atom Cu can dynamically modulate the d-band center of Pt-based alloy for boosting HOR performance. By in situ X-ray absorption spectroscopy, our research has identified that the potential-driven structural rearrangement into high-coordination Cu-Pt/Pd intensifies the ligand effect in Pt-Cu-Pd, leading to enhanced HOR performance. Thereby, modulating the d-band structure leads to near-optimal hydrogen/hydroxyl binding energies and reduced CO adsorption energies for promoting the HOR kinetics and the CO-tolerant capability. Accordingly, PtPdCu₁/C exhibits excellent CO tolerance even at 1,000 ppm impurity.

Recent Advances of Transition Metal Basic Salts for Electrocatalytic Oxygen Evolution Reaction and Overall Water Electrolysis

Electrocatalytic oxygen evolution reaction (OER) has been recognized as the bottleneck of overall water splitting, which is a promising approach for sustainable production of H2. Transition metal (TM) hydroxides are the most conventional and classical non-noble metal-based electrocatalysts for OER, while TM basic salts [M2+(OH)2-x(Am-)x/m, A = CO32-, NO3-, F-, Cl-] consisting of OH- and another anion have drawn extensive research interest due to its higher catalytic activity in the past decade. In this review, we summarize the recent advances of TM basic salts and their application in OER and further overall water splitting. We categorize TM basic salt-based OER pre-catalysts into four types (CO32-, NO3-, F-, Cl-) according to the anion, which is a key factor for their outstanding performance towards OER. We highlight experimental and theoretical methods for understanding the structure evolution during OER and the effect of anion on catalytic performance. To develop bifunctional TM basic salts as catalyst for the practical electrolysis application, we also review the present strategies for enhancing its hydrogen evolution reaction activity and thereby improving its overall water splitting performance. Finally, we conclude this review with a summary and perspective about the remaining challenges and future opportunities of TM basic salts as catalysts for water electrolysis.

Annealing and electrochemically activated amorphous ribbons: Surface nanocrystallization and oxidation effects enhanced for oxygen evolution performance

Annealing and cyclic voltammetry (CV) are essential for the activation of amorphous alloy ribbons. Various amorphous alloy ribbons have been activated in the fields of environmental catalysts using either annealing or CV. However, the combination of the two methods for improving the oxygen evolution reaction (OER) performance has rarely been reported. This combination is expected to significantly improve the OER performance of amorphous ribbons. Here, we developed an "annealing +CV-activation" integrated strategy to treat a free-standing NiFeBSiP ribbon, which as an efficient and stable oxygen-evolving electrode. The "annealing +CV-activation" strategy induces the nanocrystallization and oxidation effects on the surface of the NiFeBSiP ribbon. The effects significantly increase the electron transfer ability, the Ni/Fe/P oxidation state and the surface area of the NiFeBSiP ribbon, which consequently leads to enhancing the OER performance. As a result, the treated ribbon exhibits a low overpotential of 269 mV at 10 mA cm^-2 and a small Tafel slope of 40.5 mV dec^-1, which are much better than the OER performance of the as-spun ribbon. The enhanced OER performance of the NiFeBSiP ribbon demonstrates the significant and promising effect of the "annealing +CV-activation" integrated strategy for designing high-efficiency amorphous alloy ribbons electrocatalysts.

Crystalline-Dependent Discharge Process of Locally Enhanced Electrooxidation Activity on Ni2P

The state-of-the-art transition-based electrocatalysts in alkaline media generally suffer from unavoidable surface reconstruction during oxygen evolution reaction measurements, leading to the collapse and loss of the crystalline matrix. Low potential discharge offers a gentle way for surface reconstruction and thus realizes the manipulation of the real active site. Nevertheless, the absence of a fundamental understanding focus on this discharge region renders the functional phase, either the crystalline or amorphous matrix, for the controllable reconstruction still undecidable. Herein, we report a scenario to employ different crystalline matrices as electrocatalysts for discharge region reconstruction. The representative low crystalline Ni₂P (LC-Ni₂P) possesses a relatively weak surface structure compared with highly crystalline or amorphous Ni₂P (HC-Ni₂P or A-Ni₂P), which contributes abundant oxygen vacancies after the discharge process. The fast discharge behavior of LC-Ni₂P leads to the uniform distribution of these vacancies and thus endows the inner interface with reactant activating functionality. A high increase in current density of 36.7% is achieved at 2.32 V (vs RHE) for the LC-Ni₂P electrode. The understanding of the discharge behavior in this study, on different crystalline matrices, presents insights into the establishment of controllable surface reconstruction for an effective oxygen evolution reaction.

A Template Editing Strategy to Create Interlayer-Confined Active Species for Efficient and Durable Oxygen Evolution Reaction

Substantial overpotentials and insufficient and unstable active sites of oxygen evolution reaction (OER) electrocatalysts limit their efficiency and stability in OER-related energy conversion and storage technologies. Here, a template editing strategy is proposed to graft highly active catalytic species onto highly conductive rigid frameworks to tackle this challenge. As a successful attempt, two types of NiO₆ units of layered Ni BDC (BDC stands for 1,4-benzenedicarboxylic acid) metal organic frameworks are selectively edited by chemical etching-assisted electroxidation to create layered γ-NiOOH with intercalated Ni-O species. In such an interlayer-confined intercalated architecture, the large interlayer space with high ion permeability offers an ideal reaction region to sufficiently expose the OER active sites comprising high-density intercalated Ni-O species, which also suppresses the undesirable γ to β phase transformation, thus exhibiting efficient and durable OER activity. As a result, water oxidation can occur at an extremely low overpotential of 130 mV and affords 1000 h stability at 100 mA cm^-2 . The strategy conceptually shows the possibility of achieving stable homogeneous-like catalysis in heterogeneous catalysis.

Enhanced Acidic Water Oxidation by Dynamic Migration of Oxygen Species at the Ir/Nb2 O5-x Catalyst/Support Interfaces

Catalyst/support interaction plays a vital role in catalysis towards acidic oxygen evolution (OER), and the performance reinforcement is currently interpreted by either strain or electron donation effect. We herein report that these views are insufficient, where the dynamic evolution of the interface under potential bias must be considered. Taking Nb₂ O_5-x supported iridium (Ir/Nb₂ O_5-x ) as a model catalyst, we uncovered the dynamic migration of oxygen species between IrO_x and Nb₂ O_5-x during OER. Direct spectroscopic evidence combined with theoretical computation suggests these migrations not only regulate the in situ Ir structure towards boosted activity, but also suppress its over-oxidation via spontaneously delivering excessive oxygen from IrO_x to Nb₂ O_5-x . The optimized Ir/Nb₂ O_5-x thus demonstrated exceptional performance in scalable water electrolyzers, i.e., only need 1.839 V to attain 3 A cm^-2 (surpassing the DOE 2025 target), and no activity decay during a 2000 h test at 2 A cm^-2 .

Mastering the D-Band Center of Iron-Series Metal-Based Electrocatalysts for Enhanced Electrocatalytic Water Splitting

The development of non-noble metal-based electrocatalysts with high performance for hydrogen evolution reaction and oxygen evolution reaction is highly desirable in advancing electrocatalytic water-splitting technology but proves to be challenging. One promising way to improve the catalytic activity is to tailor the d-band center. This approach can facilitate the adsorption of intermediates and promote the formation of active species on surfaces. This review summarizes the role and development of the d-band center of materials based on iron-series metals used in electrocatalytic water splitting. It mainly focuses on the influence of the change in the d-band centers of different composites of iron-based materials on the performance of electrocatalysis. First, the iron-series compounds that are commonly used in electrocatalytic water splitting are summarized. Then, the main factors affecting the electrocatalytic performances of these materials are described. Furthermore, the relationships among the above factors and the d-band centers of materials based on iron-series metals and the d-band center theory are introduced. Finally, conclusions and perspectives on remaining challenges and future directions are given. Such information can be helpful for adjusting the active centers of catalysts and improving electrochemical efficiencies in future works.

High-Performance Iridium Thin Films for Water Splitting by CVD Using New Ir(I) Precursors

Thin films of iridium can be utilized in a wide range of applications and are particularly interesting for catalytic transformations. For the scalable deposition of functional Ir thin films, metalorganic chemical vapor deposition (MOCVD) is the method of choice, for which organometallic precursors that embody a high volatility and thermal stability need to be specifically tailored. Herein, we report the synthesis, analysis, and evaluation of new volatile Ir(I)-1,5-cyclooctadiene complexes bearing all-nitrogen coordinating guanidinate (N,N'-diisopropyl-2-dimethylamido-guanidinate (DPDMG)), amidinate (N,N'-diisopropyl-amidinate (DPAMD)), and formamidinate (N,N'-diisopropyl-formamidinate (DPfAMD)) ligands. The amidinate-based Ir complex [Ir(COD)(DPAMD)] together with O₂ was implemented in MOCVD experiments resulting in highly crystalline, dense, and conductive Ir films on a variety of substrate materials. The Ir deposits achieved outstanding electrochemical performance with overpotentials in the range of 50 mV at -10 mA·cm^-2 for catalytic hydrogen evolution reaction (HER) in acidic solution. The ability to deposit Ir layers via MOCVD exhibiting promising functional properties is a significant step toward large-scale applications.

Sequential galvanic replacement mediated Pd-doped hollow Ru-Te nanorods for enhanced hydrogen evolution reaction mass activity in alkaline media

High catalytic activity, long-term stability, and economical Pt-free catalysts for the hydrogen evolution reaction (HER) are required for the conversion of renewable energy systems. Noble nanomaterial Pt is a superior electrolysis catalyst for water splitting under typical experimental conditions with a relatively low overpotential. However, the use of Pt is limited by its high cost and activity degradation over time. Among several prospective alternatives, Ru has emerged as a promising alkaline electrolysis catalyst because of its significant catalytic activity and reduced cost compared to Pt. We designed and suggested Pd-doped hollow Ru-Te nanorods (PdRuTeNRs) via successive galvanic replacement reactions of sacrificial Te nanotemplates to further boost efficiency. The Pd/partially oxidized RuO₂/Ru/Te hetero-interfaced composition exhibited an HER mass activity of 11.3 A g^-1 Ru, twice that of Pt. In addition, the present PdRuTeNRs sufficiently maintained the activity from the 2000-cycle continuous test, greatly reducing the required cost by a quarter.

Versatile Bifunctional and Supported IrNi Oxide Catalyst for Photoelectrochemical Water Splitting

Designing a high-performance electrocatalyst that operates with photon-level energy is of the utmost importance in order to address the world’s urgent energy concerns. Herein, we report IrNi nanoparticles uniformly distributed on cost-effective activated carbon support with a low mass loading of 3% by weight to drive the overall water splitting reaction under light illumination over a wide pH range. The prepared IrNi nanomaterials were extensively characterized by SEM/EDX, TEM, XRD, Raman, and UV-visible absorption spectroscopy. The experimental results demonstrate that when the Ir:Ni ratio is 4:1, the water splitting rate is high at 32 and 25 mA cm−2 for hydrogen (at −1.16 V) and oxygen evolution reactions (at 1.8 V) in alkaline electrolyte, respectively, upon the light irradiation (100 mW cm−2). The physical and electrochemical characterization of metal and alloy combinations show that the cumulative effect of relatively high crystallinity (among the materials used in this study), reduced charge recombination rate, and improved oxygen vacancies observed with the 4Ir1Ni@AC electrode is the reason for the superior activity obtained. A high level of durability for hydrogen and oxygen evolution under light illumination is seen in the chronoamperometric study over 15 h of operation. Overall water splitting examined in 0.1 M of NaOH medium at a 50 mV s−1 scan rate showed a cell voltage of 1.94 V at a 10 mA cm−2 current density.

N-Doped Carbon as a Promoted Substrate for Ir Nanoclusters toward Hydrogen Oxidation in Alkaline Electrolytes

Development of effective electrocatalysts toward hydrogen oxidation with a low content of noble metals has attracted the attention of the catalytic community. In this work, a novel catalyst composed of nitrogen-doped carbon acting as the substrate and Ir nanoclusters as active species was prepared, which was then employed as an effective catalyst for the hydrogen oxidation reaction (HOR) in an alkaline electrolyte. In 0.1 M KOH, the optimized catalyst provides an exchange current density of 0.144 mA cm_Ir^-2 for HOR that outperforms the catalytic activity of the commercial Pt/C catalyst with a Pt content of 20 wt %. The substrate induces highly active Ir sites that markedly boosted the electrocatalytic activity for HOR. The nitrogen-doped carbon substrate increases the stability of Ir nanoclusters and decreases the absorption energy of hydrogen on Ir sites; at the same time, the higher electrostatic potential around the adsorbed hydrogen on Ir/N-doped carbon also enables them to be easily attracted by OH^- species, both of which enhanced the catalytic activity. The excellent catalytic activity and the understanding shown here will give some hints for the development of HOR catalysts used in alkaline electrolytes.

Highly Active Si Sites Enabled by Negative Valent Ru for Electrocatalytic Hydrogen Evolution in LaRuSi

The discovery and identification of novel active sites are paramount for deepening the understanding of the catalytic mechanism and driving the development of remarkable electrocatalysts. Here, we reveal that the genuine active sites for the hydrogen evolution reaction (HER) in LaRuSi are Si sites, not the usually assumed Ru sites. Ru in LaRuSi has a peculiar negative valence state, which leads to strong hydrogen binding to Ru sites. Surprisingly, the Si sites have a Gibbs free energy of hydrogen adsorption that is near zero (0.063 eV). The moderate adsorption of hydrogen on Si sites during the HER process is also validated by in situ Raman analysis. Based on it, LaRuSi exhibits an overpotential of 72 mV at 10 mA cm^-2 in alkaline media, which is close to the benchmark of Pt/C. This work sheds light on the recognition of real active sites and the exploration of innovative silicide HER electrocatalysts.

Metallopolymer Particle Engineering via Etching of Boronate Polymers toward High-Performance Overall Water Splitting Catalysts

Metallopolymers combine the property features of both metallic compounds and organic polymers, representing a typical direction for the design of high-performance hybrid materials. Here, a highly adaptive etching method to create pores and cavities in the metallopolymer particles is established. Starting from boronate polymer (BP) and inorganic@BP core-shell particles, porous, hollow, and yolk-shell metallopolymer particles can be fabricated, respectively. By taking advantage of the easy control over composition and pore/cavity structure, these metallopolymer particles provide a universal platform for the fabrication of nitrogen, boron co-doped carbon nanocomposites loaded with metals (M-NBCs). The as-prepared M-NBCs exhibit remarkable catalytic activities toward oxygen evolution reaction and hydrogen evolution reaction. An alkaline overall water splitting cell assembled by using M-NBCs as the anode and cathode can be driven by a single AAA battery. The proposed strategy for the construction of metallopolymer composites may enlighten for the design of complex hybrid nanomaterials.

Engineering Water Molecules Activation Center on Multisite Electrocatalysts for Enhanced CO2 Methanation

The renewable energy-powered electrolytic reduction of carbon dioxide (CO₂) to methane (CH₄) using water as a reaction medium is one of the most promising paths to store intermittent renewable energy and address global energy and sustainability problems. However, the role of water in the electrolyte is often overlooked. In particular, the slow water dissociation kinetics limits the proton-feeding rate, which severely damages the selectivity and activity of the methanation process involving multiple electrons and protons transfer. Here, we present a novel tandem catalyst comprising Ir single-atom (Ir₁)-doped hybrid Cu₃N/Cu₂O multisite that operates efficiently in converting CO₂ to CH₄. Experimental and theoretical calculation results reveal that the Ir₁ facilitates water dissociation into proton and feeds to the hybrid Cu₃N/Cu₂O sites for the *CO protonation pathway toward *CHO. The catalyst displays a high Faradaic efficiency of 75% for CH₄ with a current density of 320 mA cm^-2 in the flow cell. This work provides a promising strategy for the rational design of high-efficiency multisite catalytic systems.

Iridium and IrOx nanoparticles: an overview and review of syntheses and applications

Precious metals are key in various fields of research and precious metal nanomaterials are directly relevant for optics, catalysis, pollution management, sensing, medicine, and many other applications. Iridium based nanomaterials are less studied than metals like gold, silver or platinum. A specific feature of iridium nanomaterials is the relatively small size nanoparticles and clusters easily obtained, e.g. by colloidal syntheses. Progress over the years overcomes the related challenging characterization and it is expected that the knowledge on iridium chemistry and nanomaterials will be growing. Although Ir nanoparticles have been preferred systems for the development of kinetic-based models of nanomaterial formation, there is surprisingly little knowledge on the actual formation mechanism(s) of iridium nanoparticles. Following the impulse from the high expectations on Ir nanoparticles as catalysts for the oxygen evolution reaction in electrolyzers, new areas of applications of iridium materials have been reported while more established applications are being revisited. This review covers different synthetic strategies of iridium nanoparticles and provides an in breadth overview of applications reported. Comprehensive Tables and more detailed topic-oriented overviews are proposed in Supplementary Material, covering synthesis protocols, the historical role or iridium nanoparticles in the development of nanoscience and applications in catalysis.

Oxygen Evolution Reaction in Energy Conversion and Storage: Design Strategies Under and Beyond the Energy Scaling Relationship

The oxygen evolution reaction (OER) is the essential module in energy conversion and storage devices such as electrolyzer, rechargeable metal-air batteries and regenerative fuel cells. The adsorption energy scaling relations between the reaction intermediates, however, impose a large intrinsic overpotential and sluggish reaction kinetics on OER catalysts. Developing advanced electrocatalysts with high activity and stability based on non-noble metal materials is still a grand challenge. Central to the rational design of novel and high-efficiency catalysts is the development and understanding of quantitative structure-activity relationships, which correlate the catalytic activities with structural and electronic descriptors. This paper comprehensively reviews the benchmark descriptors for OER electrolysis, aiming to give an in-depth understanding on the origins of the electrocatalytic activity of the OER and further contribute to building the theory of electrocatalysis. Meanwhile, the cutting-edge research frontiers for proposing new OER paradigms and crucial strategies to circumvent the scaling relationship are also summarized. Challenges, opportunities and perspectives are discussed, intending to shed some light on the rational design concepts and advance the development of more efficient catalysts for enhancing OER performance.

Atomic Cation-Vacancy Engineering of NiFe-Layered Double Hydroxides for Improved Activity and Stability towards the Oxygen Evolution Reaction

NiFe-layered double hydroxides (NiFe-LDH) are among the most active catalysts developed to date for the oxygen evolution reaction (OER) in alkaline media, though their long-term OER stability remains unsatisfactory. Herein, we reveal that the stability degradation of NiFe-LDH catalysts during alkaline OER results from a decreased number of active sites and undesirable phase segregation to form NiOOH and FeOOH, with metal dissolution underpinning both of these deactivation mechanisms. Further, we demonstrate that the introduction of cation-vacancies in the basal plane of NiFe LDH is an effective approach for achieving both high catalyst activity and stability during OER. The strengthened binding energy between the metals and oxygen in the LDH sheets, together with reduced lattice distortions, both realized by the rational introduction of cation vacancies, drastically mitigate metal dissolution from NiFe-LDH under high oxidation potentials, resulting in the improved long-term OER stability. In addition, the cation vacancies (especially M³⁺ vacancies) accelerate the evolution of surface γ-(NiFe)OOH phases, thereby boosting the OER activity. The present study highlights that tailoring atomic cation-vacancies is an important strategy for the development of active and stable OER electrocatalysts.