Photosensitive ion channels in layered MXene membranes modified with plasmonic gold nanostars and cellulose nanofibers

Regulate Ion Transport in Subnanochannel Membranes by Ion-Pairing

The ability of biological ion channels to respond to environmental stimuli, regulate ion permeation rates, and selectively transport specific ions is essential for sustaining physiological functions and holds immense potential for various practical applications. In this study, we report a highly selective ion separation membrane capable of responding to ionic stimuli, thereby regulating the permeation rate of the target ions. This membrane is constructed from two-dimensional MXene nanosheets functionalized with γ-poly(glutamic acid) (γ-PGA) molecules. Its biomimetic ion channel structure provides spatial confinements, as well as ion recognition and response sites. Remarkably, the membrane demonstrates the ability to respond to stimulus ions, achieving regulation of target ion permeation rates by over 2 orders of magnitude and achieving a K+/Mg2+ selectivity exceeding 10.3 Unlike traditional nanochannel membranes, where ion transport is predominantly driven by ion-channel interactions, this membrane operates through an ion-ion interaction-dominated mechanism. The introduction of stimulus ions dynamically alters ion-pair formation within the subnanochannels, thereby modulating the permeation rates of target ions. This study provides a fresh perspective on ion transport mechanisms in nanoconfined environments, reflecting conditions closer to those in real-world systems. It underscores the pivotal role of ion-ion interactions in regulating ion transport and offers valuable insights into the design of next-generation ion separation membranes with tailored responsiveness.

All-Biomass Derived Nanocomposite Films

Achieving simultaneous sustainability and property is a great challenge for current thermally managed composite films. The study proposes to prepare all-biomass derived nanocomposite films with excellent mechanical, thermal, and degradation properties by self-assembling carbon quantum dots (CQDs) and carbon nanosheets (CNSs) from cellulose nanofibers (CNFs). The results showed that the nanocomposite film with CQDs1@CNSs1/CF exhibited the best comprehensive properties with thermal conductivity of 0.817 W m-1 K-1, tensile strength of 39.60 MPa, elongation at break of 6.26%, tensile modulus of 5.34 GPa, degradation residual rate in water of 86.02%, degradation residual rate in PBS of 66.67%, and degradation residual rate in buried of 52%. The all-biomass derived nanocomposite films regarding the excellent thermal conductivity, biodegradability, and mechanical properties can be available with thermal management and excellent sustainability.

Light-boosted simultaneous acid and salinity gradient energy recovery from wastewater via a nanochannel membrane with multi-objective ion separation ability

The discharge of industrial wastewater has surged to unprecedented levels due to rapid industrialization. Developing effective strategies for the concurrent recovery of resources and energy from wastewater presents a promising pathway toward sustainable development. In this study, a composite nanochannel membrane with light-boosted ion separation capabilities was designed for the concurrent recovery of acid and salinity gradient energy from metallurgical industrial wastewater. The membrane demonstrated remarkable photothermal conversion efficiency, utilizing the synergy between localized surface plasmon resonance of Ti3C2Tx component and molecular vibration of Cu-TCPP component to achieve rapid temperature rise from room temperature to 139.5 °C within 60 s under illumination. This photothermal effect created an effective temperature gradient within nanochannels, enhancing the separation efficiency for both H⁺/Cl⁻ and H⁺/Fe2+ pairs by amplifying the differences in diffusion energy barriers. When applied to acidic wastewater, the membrane achieved an outstanding salinity gradient energy conversion power density of 7.31 W/m2 over an expanded testing area, along with a H+/Fe2+ selectivity of 64.18 for acid recovery. Both energy harvesting and acid recovery performance surpass those of state-of-the-art membranes under identical testing conditions. This work presents a critical strategy for energy conversion and resource recovery from wastewater, contributing to sustainable solutions for energy, environmental, and resource challenges.

2D Conjugated Metal-Organic Framework-Based Composite Membranes for Nanofluidic Ionic Photoelectric Conversion

Nanofluidic photoelectric conversion system based on photo-excitable 2D materials can directly transduce light stimuli into an ion-transport-mediated electric signal, showing potential for mimicking the retina's function with a more favorable human-robot interactions. However, the current membranes suffer from low generation efficiency of charge carriers due to the mixed microstructure and limited charge transport ability caused by the large interlayer spacing and monotonous pathway. Here, a fully conjugated 2D hexaimino-substituted triphenylene-based metal-organic framework (2D-HATP-cMOF) based composite membrane with high conductivity for photoelectric conversion is presented. The extended π-d conjugation within the ab plane and the favorable transport pathway through π-π stacking of the c-MOF maximize the generation and transfer of charge carrier and greatly accelerate the ion transport. As a result, the 2D-HATP-cMOF-based composite membrane possesses ultrafast photoelectric response, superior to other reported 2D systems like graphene oxide (GO), transition metal carbides, carbonitrides and nitrides (MXene), and MoS2, which require at least 10 s. A successful ion pump phenomenon, that is active transport from low concentration to high concentration as an important way of information transmission in organisms, is realized based on the efficient photoelectric conversion capability. This work demonstrates the great promise of 2D c-MOF in ionic photoelectric conversion.

Scalable integration of photoresponsive highly aligned nanochannels for self-powered ionic devices

Artificial ionic nanochannels with light perception capabilities hold promise for creating ionic devices. Nevertheless, most research primarily focuses on regulating single nanochannels, leaving the cumulative effect of numerous nanochannels and their integration underexplored. We herein develop a biomimetic photoreceptor based on photoresponsive highly aligned nanochannels (pHANCs), which exhibit uniform channel heights, phototunable surface properties, and excellent compatibility with microfabrication techniques, enabling the scalable fabrication and integration into functional ionic devices. These pHANCs demonstrate exceptional ion selectivity and permeability due to the high surface charges and well-ordered conduits, resulting in outstanding energy harvesting from concentration gradients. Large-scale fabrication of pHANCs has been successfully realized, wherein hundreds of biomimetic photoreceptors produce an ultrahigh voltage over 76 volts, which has not been achieved previously. In addition, we demonstrate that the biomimetic photoreceptor can be further upscaled to be a self-powered ionic image sensor, capable of sensing and decoding incident light information.

Interlaced Composite Membranes by Charge-Induced Alternating Assembly of Monolayer Cationic COF and GO

The efficient preparation of two-dimensional large-sized monolayer covalent organic framework (COF) nanosheets for highly permeable membranes has posed a long-standing challenge in the COF field. While the self-exfoliation of charged COFs represents a promising method for nanosheet production, its efficiency requires further enhancement. In this study, we present a novel finding that the presence of hydroxyl groups on the monomer significantly influences the self-exfoliation efficiency of charged COFs. Through precise regulation of hydroxyl group numbers on the monomers, we successfully achieved the efficient fabrication of large monolayer cationic COF nanosheets with impressive solubilities in common organic solvents. By virtue of their positive charge, COF monolayer nanosheets rapidly interacted with negatively charged monolayer graphene oxide (GO) in solution, facilitating their assembly into interlaced composite membranes through electrostatic interactions. The composite membranes benefited from the strong Coulombic attraction between the COF and GO nanosheets, leading to enhanced membrane stability, while the shielding effect of GO on the COF pores contributed to improved size sieving efficiency. This innovative strategy enabled the composite membranes to achieve highly selective separation of ReO4- and MoO42-, with a remarkable 100% interception rate for MoO42-.

Nanoarchitecture via Synchronic Stacking of Metallic and Nonmetallic Two-Dimensional Nanosheets for Optimal Light-Driven Ion Transport

The exceptional selectivity and responsive ion transport in biological channels inspire technology breakthrough in energy, environmental, and resource sectors. However, existing nanofluidic systems with a high photothermal conversion efficiency often exhibit excessive thermal conductivity, which impedes the creation of effective temperature gradients and results in a low ion transport efficiency. In this study, a strategy based on the synchronic stacking of metallic and nonmetallic two-dimensional (2D) nanosheets was presented to construct heterogeneous nanofluidic channels. This specific nanoconfined architecture sustained high temperatures in the illuminated area while maintaining low temperatures in the nonilluminated area, thus obtaining a robust driving force from sunlight for directional ion transport. As a result, our light-responsive ion transport system demonstrated significant potential in solar energy conversion and osmotic energy harvesting, surpassing those of all previously reported nanofluidic systems. Additionally, although it is still at the proof-of-concept stage, it shows great promise in light signal monitoring. This work provides an effective strategy for developing advanced light-responsive ion transport systems and their important applications.

Construction of a Borophene-Based Hybrid Aerogel for Multifunctional Applications

As a novel approach to pursue high-performance multifunctional materials, the structural design of cutting-edge two-dimensional (2D) materials has ignited substantial interests. Borophene, an emerging member in the realm of 2D materials, exhibits crucial attributes, including high theoretical carrier density, electrical conductivity, magnetism, and high aspect ratio, rendering it highly promising for diverse applications. Yet, the exploration of porous structural configurations of borophene remains untapped. Addressing this gap, our study focuses on the fabrication of a multifunctional borophene hybrid foam (CMB-foam). This hybridization leverages the exceptional multifunctionality of MXene alongside borophene within a three-dimensional porous framework, facilitating reflection and absorption of electromagnetic waves, thereby demonstrating remarkable electromagnetic interference (EMI) shielding capabilities. Moreover, this structural configuration exposes an enlarged surface area, thus shortening the transport pathway for electrolyte ions, leading to an excellent energy storage performance. Additionally, CMB-foam performs well in thermal management and thermal insulation. These findings underscore the potential of borophene-based materials in multifunctional applications and offer valuable insights into further performance explorations in this domain.

Tuning Nanochannel Microenvironments of a Thermoresponsive MXene Membrane for Mixed Molecule Gradient Separation

Drawing inspiration from dynamic biological ion channels, researchers have developed various artificial membranes featuring responsive nanochannels. Typically, these membranes modify mass transport behaviors by manipulating the responsive layer on the inner surfaces of the intrinsic layer. In this study, we build two-dimensional lamellar membranes composed of titanium carbide MXene and poly(N-isopropylacrylamide), endowed with dual-level regulatable nanochannels, achieved through adjustments of nanochannel microenvironments. The size of these two-dimensional nanochannels can be altered by both the thermoresponsive polymer layer and the intrinsic MXene layer that could undergo spontaneous oxidation. The multilevel regulation strategy substantially enhances the molecular selectivity of MXene separation membranes, which is further applied for precise gradient separation toward multiple molecules. This advancement showcases the versatility and transformative capabilities of responsive nanochannel technology, setting the stage for innovative developments in diverse fields.

Advanced functional materials based on nanocellulose/Mxene: A review

The escalating need for a sustainable future has driven the advancement of renewable functional materials. Nanocellulose, derived from the abundant natural biopolymer cellulose, demonstrates noteworthy characteristics, including high surface area, crystallinity, mechanical strength, and modifiable chemistry. When combined with two-dimensional (2D) graphitic materials, nanocellulose can generate sophisticated hybrid materials with diverse applications as building blocks, carriers, scaffolds, and reinforcing constituents. This review highlights the progress of research on advanced functional materials based on the integration of nanocellulose, a versatile biopolymer with tailorable properties, and MXenes, a new class of 2D transition metal carbides/nitrides known for their excellent conductivity, mechanical strength, and large surface area. By addressing the challenges and envisioning future prospects, this review underscores the burgeoning opportunities inherent in MXene/nanocellulose composites, heralding a sustainable frontier in the field of materials science.

Nanofluidic Membrane-Assisted Organic Electrochemical Transistors for Bioinspired Gustatory Sensation Based on Selective Cation Transport

Natural organisms have evolved precise sensing systems relying on unique ion channels, which can efficiently perceive various physical/chemical stimuli based on ionic signal transmission in biological fluid environments. However, it is still a huge challenge to achieve extensive applications of the artificial counterparts as an efficient wet sensing platform due to the fluidity of the working medium. Herein, nanofluidic membranes with selective cation transport properties and solid-state organic electrochemical transistors (OECTs) with amplified signals are integrated together to mimic human gustatory sensation, achieving ionic gustatory reagent recognition and a portable configuration. Cu-HHTP nanofluidic membranes with selective cation transport through their uniform micropores are constructed first, followed by assembly with OECTs to form the designed nanofluidic membrane-assisted OECTs (nanofluidic OECTs). As a result, they can distinguish typically ionic gustatory reagents, and even ionic liquids (ILs), demonstrating enhanced gustatory perception performance under a wide concentration range (10-7-10-1 m) compared with those of conventional OECTs. The linear correlations between the response and the reagent concentration further indicate the promising potential for practical application as a next-generation sensing platform. It is suggested that nanofluidic membranes mediated intramembrane cation transport based on the steric hindrance effect, resulting in distinguishable and improved response to multiple ions.

Multi-Interface Engineering of MXenes for Self-Powered Wearable Devices

Self-powered wearable devices with integrated energy supply module and sensitive sensors have significantly blossomed for continuous monitoring of human activity and the surrounding environment in healthcare sectors. The emerging of MXene-based materials has brought research upsurge in the fields of energy and electronics, owing to their excellent electrochemical performance, large surface area, superior mechanical performance, and tunable interfacial properties, where their performance can be further boosted via multi-interface engineering. Herein, a comprehensive review of recent progress in MXenes for self-powered wearable devices is discussed from the aspects of multi-interface engineering. The fundamental properties of MXenes including electronic, mechanical, optical, and thermal characteristics are discussed in detail. Different from previous review works on MXenes, multi-interface engineering of MXenes from termination regulation to surface modification and their impact on the performance of materials and energy storage/conversion devices are summarized. Based on the interfacial manipulation strategies, potential applications of MXene-based self-powered wearable devices are outlined. Finally, proposals and perspectives are provided on the current challenges and future directions in MXene-based self-powered wearable devices.

MXenes for Wearable Physical Sensors toward Smart Healthcare

The gradual rise of personal healthcare awareness is accelerating the deployment of wearable sensors, whose ability of acquiring physiological vital signs depends on sensing materials. MXenes have distinct chemical and physical superiorities over other 2D nanomaterials for wearable sensors. This review presents a comprehensive summary of the latest advancements in MXenes-based materials for wearable physical sensors. It begins with an introduction to special structural features of MXenes for sensing performance, followed by an in-depth exploration of versatile functionalities. A detailed description of different sensing mechanisms is also included to illustrate the contribution of MXenes to the sensing performance and its improvement. In addition, the real-world applications of MXenes-based physical sensors for monitoring different physiological signs are included as well. The remaining challenges of MXenes-based materials for wearable physical sensors and their promising opportunities are finally narrated, in conjunction with a prospective for future development.

Nanofluidic sensing inspired by the anomalous water dynamics in electrical angstrom-scale channels

Manipulation of confined water dynamics by voltage keeps great importance for diverse applications. However, limitations on the membrane functions, voltage-control range, and unclear dynamics need to be addressed. Herein, we report an anomalous electrically controlled gating phenomenon on cation-intercalated multi-layer Ti3C2 membranes and reveal the confined water dynamics. The water permeation rate was improved rapidly following the application and rise of voltage and finally reached a maximum rate at 0.9 V. The permeation rate starts to decrease from 0.9 V. Below 0.9 V, the electric field affects the charge and polarity of water molecules and then leads to ordered and denser rearrangement in the two-dimensional (2D) channel to accelerate the permeation rate. Above 0.9 V, with the assistance of metal cations, the surge in current induced aggregation of water molecules into clusters, thereby limiting the water mobility. Based on these findings, a high-performance humidity sensor was developed by simultaneously optimizing the response and recovery speeds through electric manipulation. This work provides flexible strategies in intelligent membrane design and nanofluidic sensing.

Highly conductive, rapid self-healing, and anti-freezing poly(3,4-ethylenedioxythiophene)/lignosulfonate-cationic guar gum ionogels for multifunctional sensors

Soft ionic conductors exhibit immense potential for applications in soft ionotronics, including ionic skin, human-machine interface, and soft luminescent device. Nevertheless, the majority of ionogel-based soft ionic conductors are plagued by issues such as freezing, evaporation, liquid leakage, and inadequate self-healing capabilities, thereby constraining their usability in complex environments. In this study, we present a novel strategy for fabricating conductive ionogels through the proportionally mixing cationic guar gum (CGG), water, 1-butyl-3-methylimidazolium chloride (BmimCl)/glycerol eutectic-based ionic liquid, and poly(3,4-ethylenedioxythiophene)/lignosulfonate (PEDOT/LS). The resultant benefits from strong hydrogen bonding and electrostatic interactions among its constituents, endowing it with an ultrafast self-healing capability (merely 30 s) while sustaining high electrical conductivity (~16.5 mS cm-1). Moreover, it demonstrates exceptional water retention (62 % over 10 days), wide temperature tolerance (-20 to 60 °C), and injectability. A wearable sensor fabricated from this ionogel displayed remarkable sensitivity (gauge factor = 17.75) and a rapid response to variations in strain, pressure, and temperature, coupled with both long-term stability and wide working temperature range. These attributes underscore its potential for applications in healthcare devices and flexible electronics.

Photothermal controlled antibacterial Ta4C3Tx-AgNPs/nanocellulose bioplastic food packaging

Uncontrolled antibacterial, insufficient barrier and low strength are the bottlenecks of food packaging applications. Herein, Ta4C3Tx nanosheet as a template was used to prepare Ta4C3Tx immobilized silver nanoparticles (Ta4C3Tx-AgNPs), which was compounded with nanocellulose to obtain high-strength and high barrier controllable bactericidal nanocellulose-based bioplastic packaging (CTa-Ag). The results indicated that due to the hydrogen bonding between nanocellulose and Ta4C3Tx, the bridging effect of QCS (quaternized chitosan) and the filling of Ta4C3Tx-AgNPs, the CTa-Ag had tightly stacked microstructure, which endowed them with excellent mechanical properties (4.0 GPa), ultra-low oxygen permeability (0.009 cm3/m2·d·atm) and stable photothermal conversion efficiency. Importantly, the packaging exhibits the ability to control the release of antibacterial active ingredients. Moreover, the synergistic effects of controllable release of nano active factors, photothermal and photocatalysis in CTa-Ag gave it long-lasting antibacterial properties. This study brings new insights into the design and manufacture of multifunctional, controllable and long-lasting antibacterial bioplastic food packaging.

Photo-Driven Ion Directional Transport across Artificial Ion Channels: Band Engineering of WS2 via Peptide Modification

Biological photo-responsive ion channels play important roles in the important metabolic processes of living beings. To mimic the unique functions of biological prototypes, the transition metal dichalcogenides, owing to their excellent mechanical, electrical, and optical properties, are already used for artificial intelligent channel constructions. However, there remain challenges to building artificial bio-semiconductor nanochannels with finely tuned band gaps for accurately simulating or regulating ion transport. Here, two well-designed peptides are employed for the WS2 nanosheets functionalization with the sequences of PFPFPFPFC and DFDFDFDFC (PFC and DFC; P: proline, D: aspartate, and F: phenylalanine) through cysteine (Cys, C) linker, and an asymmetric peptide-WS2 membrane (AP-WS2M) could be obtained via self-assembly of peptide-WS2 nanosheets. The AP-WS2M could realize the photo-driven anti-gradient ion transport and vis-light enhanced osmotic energy conversion by well-designed working patterns. The photo-driven ion transport mechanism stems from a built-in photovoltaic motive force with the help of formed type II band alignment between the PFC-WS2 and DFC-WS2. As a result, the ions would be driven across the channels of the membrane for different applications. The proposed system provides an effective solution for building photo-driven biomimetic 2D bio-semiconductor ion channels, which could be extensively applied in the fields of drug delivery, desalination, and energy conversion.

Three-Dimensional Network of Highly Uniform Cobalt Oxide Microspheres/MXene Composite as a High-Performance Electrocatalyst in Hydrogen Evolution Reaction

Due to its affordable cost, excellent redox capability, and relatively effective resistance to corrosion in alkaline environments, spinel Co3O4 demonstrates potential as a viable alternative to noble-metal-based electrocatalysts. Nevertheless, these materials continue to exhibit drawbacks, such as limited active surface area and inadequate intrinsic conductivity. Researchers have been trying to increase the electrical conductivity of Co3O4 nanostructures by integrating them with various conductive substrates due to the low conductivity of pristine Co3O4. In this study, uniform cobalt glycerate solid spheres are first synthesized as the precursor and subsequently transformed into cobalt oxide microspheres by a simple annealing procedure. Co3O4 grown on the surface of Ti3C2Tx-MXene nanosheets (Co3O4/MXene) was successfully synthesized through electrostatic attraction. In order to create a positively charged surface, the Co3O4 microspheres were treated with aminopropyltriethoxysilane. The Co3O4/MXene exhibited a low overpotential of 118 mV at 10 mA cm-2 and a Tafel slope of 113 mV dec-1 for the hydrogen evolution reaction, which is much lower than the pristine Co3O4 at 232 and 195.3 mV dec-1.

Green Alga-Inspired Underwater Vision Based on Light-Driven Active Ion Transport across Janus Dual-Field Heterostructures

Natural organisms have evolved various biological ion channels to make timely responses toward different physical and/or chemical stimuli, giving guidance to construct artificial counterparts and expand the corresponding applications. They have also shown promising potential to overcome disadvantages of traditional electronic devices (e.g., energy-consuming operation and adverse humidity interference). Herein, we constructed a green alga-inspired nanofluidic system based on a Janus dual-field heterogeneous membrane (i.e., J-HM), which can function underwater as an artificial visual platform for light perception through enhanced active ion transport. The J-HM was obtained through sequentially assembled MXene and Cu-HHTP (i.e., a metal-organic framework based on the reaction between 2,3,6,7,10,11-hexahydroxytriphenylene hydrate (HHTP) and Cu2+) building units. Due to the formed temperature gradient and intramembrane electric field caused by the localized thermal excitation and efficient charge separation of J-HM under illumination, thermo-osmotic and photo-driven forces are generated for preferential cation transport from Cu-HHTP to MXene. Furthermore, unidirectional active transport can be enhanced by self-diffusion under a concentration gradient. Then, the corresponding underwater light perceptions at various light illumination conditions are explored, showing nearly a linear correlation with the light intensity. Finally, it is demonstrated that the visual platform can achieve object shape, definition, and distance recognition using a defined pixelated matrix, giving impetus to develop ionic signal transmission based sensing systems.

Light-responsive and ultrapermeable two-dimensional metal-organic framework membrane for efficient ionic energy harvesting

Nanofluidic membranes offer exceptional promise for osmotic energy conversion, but the challenge of balancing ionic selectivity and permeability persists. Here, we present a bionic nanofluidic system based on two-dimensional (2D) copper tetra-(4-carboxyphenyl) porphyrin framework (Cu-TCPP). The inherent nanoporous structure and horizontal interlayer channels endow the Cu-TCPP membrane with ultrahigh ion permeability and allow for a power density of 16.64 W m-2, surpassing state of-the-art nanochannel membranes. Moreover, leveraging the photo-thermal property of Cu-TCPP, light-controlled ion active transport is realized even under natural sunlight. By combining solar energy with salinity gradient, the driving force for ion transport is reinforced, leading to further improvements in energy conversion performance. Notably, light could even eliminate the need for salinity gradient, achieving a power density of 0.82 W m-2 in a symmetric solution system. Our work introduces a new perspective on developing advanced membranes for solar/ionic energy conversion and extends the concept of salinity energy to a notion of ionic energy.

Functional MXenes: Progress and Perspectives on Synthetic Strategies and Structure-Property Interplay for Next-Generation Technologies

MXenes are a class of 2D materials that include layered transition metal carbides, nitrides, and carbonitrides. Since their inception in 2011, they have garnered significant attention due to their diverse compositions, unique structures, and extraordinary properties, such as high specific surface areas and excellent electrical conductivity. This versatility has opened up immense potential in various fields, catalyzing a surge in MXene research and leading to note worthy advancements. This review offers an in-depth overview of the evolution of MXenes over the past 5 years, with an emphasis on synthetic strategies, structure-property relationships, and technological prospects. A classification scheme for MXene structures based on entropy is presented and an updated summary of the elemental constituents of the MXene family is provided, as documented in recent literature. Delving into the microscopic structure and synthesis routes, the intricate structure-property relationships are explored at the nano/micro level that dictate the macroscopic applications of MXenes. Through an extensive review of the latest representative works, the utilization of MXenes in energy, environmental, electronic, and biomedical fields is showcased, offering a glimpse into the current technological bottlenecks, such asstability, scalability, and device integration. Moreover, potential pathways for advancing MXenes toward next-generation technologies are highlighted.

Light-Augmented Multi-ion Interaction in MXene Membrane for Simultaneous Water Treatment and Osmotic Power Generation

The mixing of wastewater and natural water releases abundant osmotic energy. Harvesting this energy could significantly reduce the energy and economic cost of water treatment, leading to sustainable wastewater treatment technology. Yet, such energy harvesting is highly challenging because it requires a material that is highly permeable to nontoxic ions while rejecting toxic ions in wastewater to reach high power density and prevent environmental pollution. In this work, we demonstrate that a light-augmented biomimetic multi-ion interaction in an MXene membrane can simultaneously realize high permeability of Na+ ions for enhanced osmotic power generation and high selectivity to heavy metal ions up to a ratio of 2050 for wastewater treatment. The Na+ permeability is enhanced by the photothermal effect of the MXene membrane. The transport of heavy metal ions, however, is suppressed because, under angstrom-confinement, heavy metal ions are strongly electrostatically repelled by the increased number of permeating Na+ ions. As a result, the membrane can stably generate osmotic power from simulated industrial wastewater, and the power density can be enhanced by 4 times under light illumination of approximate 1 sun intensity. This work highlights the importance of multi-ion interaction for the transport properties of ionic materials, which remains rarely investigated and poorly understood in previous studies.

Efficient photo-driven ion pump through slightly reduced vertical graphene oxide membranes

Solar energy can be harvested using biological light-driven ion pumps for the sustainability of life. It remains a significant challenge to develop high-performance artificial light-driven ion pumps for solar energy harvesting in all solid-state materials. Here, we exploit the benefits of short channel lengths and efficient light absorption to demonstrate efficient photo-driven ion transport in slightly reduced vertical graphene oxide membranes (GOMs). Remarkably, this photo-driven ion pump exhibits excellent ability, countering a 10-fold electrolyte concentration gradient. We propose a plausible mechanism where light illumination enhances the electric potential of ion channels on GOMs triggered by the separation of photoexcited charge carriers between the sp2 and sp3 carbon clusters. This results in the establishment of an electric potential difference across the effective ion channels composed of sp3 carbon clusters, thus driving the directional transport of cations from the illuminated side to the non-illuminated side. The promising results of this study provide new possibilities for the application of vertical 2D nanofluidic membranes in areas such as artificial photosynthesis, light harvesting, and water treatment.

Preparation of High Conductive Medium and Establishment of Laege Capacity Conductive Channel

The preparation of highly conductive media and the construction of conducting channels play a crucial role in improving the electrical conductivity of electrically conductive adhesives. Therefore, a new MXene structure is reported in this paper, and the improved structure is rationally designed by computational modeling, which greatly prevents the buildup of MXene nanosheets, improves the stability of the structure, and creates a wide electron transfer channel, and the capacitance contribution of this structure is up to 86.3%. By mixing MXene modified with Ag-plated copper powder in a quantitative relationship to form high conductive media, the electrical conductivity is largely improved and the defect of low electron transfer rate of conventional conductive fillers is broken. The potential value of high conductive media is largely exploited using high throughput and machine learning methods, and here we show that the resistivity has reached 9.668 × 10-7 Ω m. The first principles investigate the conductive channels and electron transfer pathways of high-conductive media at the atomic level, further revealing the mechanism of action of high-conductive media. This study is also the first report on the application of MXene to high-conductive media.

Near-Infrared-Driven Nanorocket for Rapid and Ultrasensitive Detection of MicroRNA

Herein, by introducing gold nanostars (AuNSs) as fuel core, a near-infrared-driven nanorocket (NIDNR) with pretty fast walking was exploited for ultrasensitive miRNA detection. Compared with traditional nanomaterials-comprised nanomachines (NMs), the NIDNR possesses much better kinetic and thermodynamic performance owing to the extra photothermal driving force from localized surface plasmon (LSP). Impressively, the whole reaction time of NIDNR down to 15 min was realized, which is almost more than 8 times beyond those of conventional DNA-based NMs. This way, the inherent obstacle of traditional NMs, including long reaction time and low efficiency, could be easily addressed. As a proof of concept, the NIDNR was successfully applied to develop an electrochemical biosensing platform for rapid and sensitive detection of miRNA with an LOD down to 2.95 aM and achieved the real-time assay of real biological samples from human hepatocellular carcinoma cells (MHCC97L) and HeLa, thus providing an innovative insight to design more versatile DNA nanomachines for ultimate application in biosensing platform construction and clinical sample detection.

Carbonized Syndiotactic Polystyrene/Carbon Nanotube/MXene Hybrid Aerogels with Egg-Box Structure: A Platform for Electromagnetic Interference Shielding and Solar Thermal Energy Management

Functional materials for electromagnetic interference (EMI) shielding are a consistently hot topic in the booming communication engineering, proceeding the development that tends to the multifunctional EMI shielding materials. Herein, a series of carbonized syndiotactic polystyrene/carbon nanotube/MXene (CsPS/CNT/MXene) hybrid aerogels were fabricated for EMI shielding and solar thermal energy conversion purposes. To fabricate the hybrid aerogels, a porous CNT/MXene framework was initially prepared using freeze-casting. Subsequently, sPS was infused into the porous structure, followed by hyper-cross-linking and carbonization of sPS under an inert atmosphere. The resulting aerogels exhibited a distinctive egg-box structure, comprising numerous nanofibrous carbon microspheres embedded within the lamellar framework. The mass ratio between CNT and MXene was regulated to identify an optimum aerogel, that is, the CCM-4-6, which exhibited impressive properties including Young's compression modulus of 0.67 MPa, a water contact angle of 137.6 ± 4.1°, a specific surface area of 110 m2 g-1, an electrical conductivity of 43.0 S m-1, and an EMI SE value of 40 dB. Meanwhile, phase-change composites were fabricated through encapsulating paraffin wax within the hybrid aerogels. For the CCM-4-6 aerogel, a noteworthy encapsulation ratio was achieved at about 76.7%, along with remarkable latent heat, good thermal reliability, and commendable solar thermal energy conversion capacity. This study presents a facile route to prepare multifunctional EMI shielding materials.