Long-chain anionic surfactants enabling stable perovskite/silicon tandems with greatly suppressed stress corrosion

Fluid Chemistry of Metal Halide Perovskites

Solution-processed metal halide perovskites (MHPs) have been rapidly developed worldwide, with much attention to fluid dynamic, fluid crystallization, and fluid interfaces, all falling within the realm of fluid chemistry. It is widely recognized that the theory of fluid chemistry has been proven to provide an effective means for the improvement of perovskite crystallization and the enhancement of perovskite solar cells (PSCs) performance. In this review, the fluid behavior, microfluidic synthesis, and aging process of perovskite materials are first investigated, with emphasis on the related improvement methods and chemical mechanisms. Second, the internal crystallization chemistry, external interface chemistry, and the large-area PSCs based on the fluid chemistry are discussed. Finally, four specific directions for future studies of fluid chemistry of MHPs are proposed, aiming to harness the theoretical advantages of fluid chemistry and contribute to the industrialization of PSCs.

Modulating Binding Strength and Acidity of Benzene-Derivative Ligands Enables Efficient and Hysteresis-Free Perovskite/Silicon Tandem Solar Cells

Passivating defects at the wide-bandgap perovskite/C60 interface without impeding interfacial charge transport can effectively enhance the efficiency of perovskite/silicon tandem solar cells (TSCs). Herein, we study the impact of benzene-derivative ligands with elaborately modulated binding strength and acidity on wide-bandgap perovskites for high-performance perovskite/silicon TSCs. Specifically, the acidity/alkalinity and binding strength are preliminarily tuned using different functional groups of -PO₃H₂, -COOH, and -NH₂, and further finely adjusted by altering the chain lengths between the benzene ring and the functional groups. The results show that strong binding is indispensable for effectively suppressing voltage loss. However, the commonly used benzylphosphonic acid (BPPA) for firm surface binding exhibits too strong acidity that can etch the perovskite surface, resulting in halide-vacancy defects and pronounced hysteresis. Increasing the side chain length of BPPA to (2-phenylethyl)phosphonic acid not only enables a suitable acid dissociation constant (pKa) to avoid acid-induced etching but also achieves robust anchoring to the perovskite surface with a parallel adsorption orientation, which reduces the charge transport barrier at the interface. These properties enable strong-adsorption surface termination (SAST) of the perovskite surface while preventing acid-induced etching. As a result, the SAST strategy achieves a remarkable efficiency of 32.13% (certified 31.72%) for hysteresis-free perovskite/silicon TSCs.

Hole-selective Transparent In Situ Passivation Contacts for Efficient and Stable n-i-p Graded Perovskite/Silicon Tandem Solar Cells

The optically deficient and intrinsically unstable hole transport layer (HTL) is the Achilles' heel of n-i-p perovskite/silicon tandems. Here, a minimalist transparent hole-selective contact is developed without additional HTL by simply integrating cross-linkable p-type small molecules into antisolvent. This strategy not only improves the perovskite crystallinity, shields the perovskite from external stressors, and suppresses interfacial mass exchange, but also provides efficient defect passivation and favorable band alignment via the formation of graded heterojunction. Consequently, the corresponding 1.65 eV perovskite solar cell achieves a stabilized efficiency of 19.6%, alongside significantly improved thermal, ultraviolet, and operation stabilities. Furthermore, leveraging its outstanding transparency, a bifacial single-junction device is showcased achieving a record bifaciality of 101.4%, and a monolithic perovskite/silicon tandem boasting a certified efficiency of 29.2% for 1.04 cm2, which represents the highest certified efficiency achieved for n-i-p perovskite/silicon tandems. The demonstration of efficient and stable minimalist hole-selective contacts encourages the tandem community to reevaluate the n-i-p structure, with the goal of harnessing the high open-circuit voltage of single-junction n-i-p PSCs.

Siloxane Decorated Water-Obstructing Guest for Efficient Air-Processed OSCs

The future applications of organic solar cells (OSCs) necessitate a thorough consideration of their ambient stability and processability, particularly for large area air-processed engineering, but water-induced degradation of active layer critically restricts its development. To surmount this hurdle, a water-obstructing guest (WOG) strategy is proposed to attenuate the interaction of the active layer with water molecules, reduce defects in blend films, and enhance the devices stability under high relative humidity (RH) conditions by introducing a siloxane-containing polymer D18-SiO. In addition to suppressing trap density, the WOG with hydrophobic and low surface free energy characteristics, forms a capping layer that blocks moisture penetration while preserving ideal nano-micromorphology with high crystallinity and tight packing properties. Power conversion efficiencies (PCE) of >19% is reported for spin coating OSCs fabricated across an RH range of 20 to 90%, and PCE of >17% blade coating OSCs at 90% RH. The D18-SiO, serves as a protective barrier to enhance the device stability, and the corresponding unencapsulated OSCs retained 80.7% of its initial performance in air (≈ 40% RH) after 600-h maximum power point tracking under continuous light illumination, showcasing great potential in designing WOG strategy for large-scale production of air-processed OSCs.

Top-Down Dual-Interface Carrier Management for Highly Efficient and Stable Perovskite/Silicon Tandem Solar Cells

Despite significant advancements in the power conversion efficiency (PCE) of perovskite/silicon tandem solar cells, improving carrier management in top cells remains challenging due to the defective dual interfaces of wide-bandgap perovskite, particularly on textured silicon surfaces. Herein, a series of halide ions (Cl-, Br-, I-) substituted piperazinium salts are designed and synthesized as post-treatment modifiers for perovskite surfaces. Notably, piperazinium chloride induces an asymmetric bidirectional ions distribution from the top to the bottom surface, with large piperazinium cations concentrating at the perovskite surface and small chloride anions migrating downward to accumulate at the buried interface. This results in effective dual-interface defect passivation and energy band modulation, enabling wide-bandgap (1.68 eV) perovskite solar cells to achieve a PCE of 22.3% and a record product of open-circuit voltage × fill factor (84.4% relative to the Shockley-Queisser limit). Furthermore, the device retains 91.3% of its initial efficiency after 1200 h of maximum power point tracking without encapsulation. When integrated with double-textured silicon heterojunction solar cells, a remarkable PCE of 31.5% is achieved for a 1.04 cm2 monolithic perovskite/silicon tandem solar cell, exhibiting excellent long-term operational stability (T80 = 755 h) without encapsulation in ambient air. This work provides a convenient strategy on dual-interface engineering for making high-efficiency and stable perovskite platforms.

Molecular Design of Hole-Collecting Materials for Co-Deposition Processed Perovskite Solar Cells: A Tripodal Triazatruxene Derivative with Carboxylic Acid Groups

High-performance and cost-effective hole-collecting materials (HCMs) are indispensable for commercially viable perovskite solar cells (PSCs). Here, we report an anchorable HCM composed of a triazatruxene core connected with three alkyl carboxylic acid groups (3CATAT-C3). In contrast to the phosphonic acid-containing tripodal analog (3PATAT-C3), 3CATAT-C3 molecules can form a hydrophilic monolayer on a transparent conducting oxide surface, which is beneficial for subsequent perovskite film deposition in the traditional layer-by-layer fabrication process. More importantly, the larger diffusion coefficient and higher surface energy make 3CATAT-C3 suitable for the simplified, cost-effective one-step co-deposition process in which 3CATAT-C3 was directly added as part of the perovskite precursor solution. 3CATAT-C3 is predominantly located at the perovskite bottom surface after spin-coating the mixed precursor solution, facilitating charge extraction. Devices with 3CATAT-C3 fabricated by this co-deposition method exhibit superior performance with a champion power conversion efficiency of over 23%. The unencapsulated devices showed good operational stability (retaining 90% of the initial output after 100 h), thermal durability (retaining 95% of the initial value after heating at 105 °C under air), and excellent storage stability (showing no drop in performance over 8000 h). Based on the results of time-of-flight secondary-ion mass spectroscopy (ToF-SIMS) and diffusion order nuclear magnetic resonance spectroscopy (DOSY), we elucidated the effect of anchoring groups on the performance of the tripodal HCMs in PSCs as well as the mechanism of the co-deposition fabrication process. Our findings provide valuable insights for the molecular design of multifunctional hole-collecting materials, further advancing the performance of perovskite solar cells.

Spontaneous Catalytic Reaction of a Surfactant in the Interfacial Microenvironment of Colloidal Gold Nanoparticles

The performance of nanomaterials is significantly determined by the interfacial microenvironment, in which a surfactant plays an essential role as the adsorbent, but its involvement in the interfacial reaction is often overlooked. Here, it was discovered that citrate and ascorbic acid, the two primarily used surfactants for colloidal gold nanoparticles (Au NPs), can spontaneously undergo catalytic reaction with trace-level nitrogenous residue under ambient environment to form oxime, which is subsequently cleaved to generate CN- or a compound containing the -CN group. Such a catalytic reaction shows wide universality in both reactants, including various carbonaceous and nitrogenous sources, and metal catalysts, including Au, Ag, Fe, Cu, Ni, Pt, and Pd NPs. Furthermore, with the removal of this reaction, adsorbed CO with diverse adsorption configurations was observed via surface-enhanced Raman spectroscopy under ambient conditions without an applied potential. Our work highlights the non-negligible significance of surfactants in interfacial microenvironments and provides crucial insights into the fundamental understanding of interfacial chemical reactions.

Amphipathic Astaxanthin Additive for Low Voltage-loss Perovskite Solar Cells With Enhanced Quasi-Fermi Level Splitting and Solar Hydrogen Production Application

Even though the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is nearly approaching the Schottky-Queisser limit, low open-circuit voltage (Voc) and severe Voc loss problems continue to impede the improvement of PCEs. Astaxanthin (ASTA) additive is introduced in the formamidinium lead triiodide (FAPbI3) perovskite film as an additive, which can facilitate the transportation of charge carriers and interact with Pb2+ by its distinctive groupings. Furthermore, the addition of ASTA decreases the defect's active energy, regulates the deep-level defect by filling up the grain boundaries (GBs), and promotes the crystallization of perovskite film. Remarkably, an enhanced quasi-Fermi level splitting (QFLS) of 1.164 eV and a reduced Voc loss of only 96 mV are realized. The champion PCE of 24.56% is attained by ASTA-modified PSCs on the basis of 22.75% PCE. Moreover, the PSCs that underwent ASTA modification demonstrate improved operational stability, ensuring consistent output in real-world scenarios. Furthermore, PSCs with an active area of 1 cm2 are used for water electrolysis to produce hydrogen and exhibit a PCE of 22.41%. This work offers an environmentally benign solution to address the inherent issues of FAPbI3 PSCs and lays the groundwork for the development of a prospective solar hydrogen production application.

Towards the 10-Year Milestone of Monolithic Perovskite/Silicon Tandem Solar Cells

The perovskite/silicon tandem solar cell represents one of the most promising avenues for exceeding the Shockley-Queisser limit for single-junction solar cells at a reasonable cost. Remarkably, its efficiency has rapidly increased from 13.7% in 2015 to 34.6% in 2024. Despite the significant research efforts dedicated to this topic, the "secret" to achieving high-performance perovskite/silicon tandem solar cells seems to be confined to a few research groups. Additionally, the discrepancies in preparation and characterization between single-junction and tandem solar cells continue to impede the transition from efficient single-junction to efficient tandem solar cells. This review first revisits the key milestones in the development of monolithic perovskite/silicon tandem solar cells over the past decade. Then, a comprehensive analysis of the background, advancements, and challenges in perovskite/silicon tandem solar cells is provided, following the sequence of the tandem fabrication process. The progress and limitations of the prevalent stability measurements for tandem devices are also discussed. Finally, a roadmap for designing efficient, scalable, and stable perovskite/silicon tandem solar cells is outlined. This review takes the growth history into consideration while charting the future course of perovskite/silicon tandem research.

Designing Surface Passivators Through Intramolecular Potential Manipulation for Efficient and Stable Perovskite Solar Cells

The conjugation of terminal ammonium salt groups with perovskite surfaces is a frequently employed technique that aims to enhance the overall performance of perovskite materials, encompassing both bulk and surface properties. Particularly, it exhibits heightened efficacy when applied to surface modification, due to its ability to mitigate defect accumulation and facilitate facile binding with the receptive sites inherent to the perovskite structure. However, the interaction of the bulk ammonium group with PbI2 has the potential to form a low-dimensional phase of perovskite, which may obstruct carrier extraction at the interface. Therefore, the surface passivators (MeO-PFACl) are designed through intramolecular potential manipulation. The combinations of the electron-donating methoxy group and π-π conjugation of the phenyl ring reduce the local potential at the reactive site of formamidinium group, making it less likely to form a low-dimension phase with perovskite. This surface passivation strategy effectively suppresses the surface nonradiative recombination and promotes the interface carrier extraction. The devices treated with MeO-PFACl have demonstrated exceptional performance, achieving a peak power conversion efficiency (PCE) of 25.88%, with an average PCE of 25.37%. These works offer a novel principle for enhancing both the efficiency and stability of PSCs using ammonium-incorporated molecules without the induction of an additional phase layer.

Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells Enabled by Contact-Resistance-Tunable Indium Tin Oxide Interlayer

The imperfect charge behavior at the interfaces of perovskite/electron-transport layer (ETL)/transparent conducting oxide (TCO) limits the further performance improvement of perovskite/silicon tandem solar cells. Herein, an indium tin oxide interlayer is deposited between ETL and TCO to address this issue. Specifically, the interlayer is prepared using an all-physical and H2O-free method, electron-beam evaporation, which can avoid any potential damage to the underlying perovskite and ETL layers. Moreover, the interlayer's composition can be readily tuned by changing the evaporator component, enabling authors to regulate the contact resistance and energy-level alignment of the ETL/TCO interface. Consequently, the resultant perovskite/silicon tandem solar cells exhibit an impressive power conversion efficiency (PCE) of 30.8% (certified 30.3%). Moreover, the device retains 98% of its initial PCE after continuous operation under ambient conditions for 1078 h, representing one of the most stable and efficient perovskite/silicon tandem solar cells.

A crystal capping layer for formation of black-phase FAPbI3 perovskite in humid air

Black-phase formamidinium lead iodide (α-FAPbI3) perovskites are the desired phase for photovoltaic applications, but water can trigger formation of photoinactive impurity phases such as δ-FAPbI3. We show that the classic solvent system for perovskite fabrication exacerbates this reproducibility challenge. The conventional coordinative solvent dimethyl sulfoxide (DMSO) promoted δ-FAPbI3 formation under high relative humidity (RH) conditions because of its hygroscopic nature. We introduced chlorine-containing organic molecules to form a capping layer that blocked moisture penetration while preserving DMSO-based complexes to regulate crystal growth. We report power conversion efficiencies of >24.5% for perovskite solar cells fabricated across an RH range of 20 to 60%, and 23.4% at 80% RH. The unencapsulated device retained 96% of its initial performance in air (with 40 to 60% RH) after 500-hour maximum power point operation.

Ultrathin (∼30 µm) flexible monolithic perovskite/silicon tandem solar cell

The efficiency of rigid perovskite/silicon tandem solar cells has reached 33.9%. However, there has been no report on flexible perovskite/silicon tandem solar cells due to the challenge of overcoming the poor light absorption of ultrathin silicon bottom cells while maintaining their mechanical flexibility. Herein, we report the first demonstration of the perovskite/silicon tandem solar cell based on flexible ultrathin silicon. We show that reducing the wafer thicknesses and feature sizes of the light-trapping textures can significantly improve the flexibility of silicon without sacrificing light utilization. In addition, the capping of the perovskite top cells can further improve the device's mechanical durability by shifting the neutral plane toward the silicon surface that is prone to fracture. Finally, the resulting ultrathin (∼30 µm) flexible perovskite/silicon tandem solar cell achieves a certified stabilized efficiency of 22.8% with an extremely high power-to-weight ratio of 3.12 W g-1. Moreover, the flexible tandems exhibit remarkable bending durability, maintaining 98.2% of their initial performance after 3000 bending cycles at a radius of only 1 cm.

Identification and Dynamics of Microsecond Long-Lived Charge Carriers for CsPbBr3 Perovskite Quantum Dots, Featuring Ambient Long-Term Stability

We analyze the stability and photophysical dynamics of CsPbBr3 perovskite quantum dots (PeQDs), fabricated under mild synthetic conditions and embedded in an amorphous silica (SiOx) matrix (CsPbBr3@SiOx), underscoring their sustained performance in ambient conditions for over 300 days with minimal optical degradation. However, this stability comes at the cost of a reduced photoluminescence efficiency. Time-resolved spectroscopic analyses, including flash-photolysis time-resolved microwave conductivity and time-resolved photoluminescence, show that excitons in CsPbBr3@SiOx films decay within 2.5 ns, while charge carriers recombine over approximately 230 ns. This longevity of the charge carriers is due to photoinduced electron transfer to the SiOx matrix, enabling hole retention. The measured hole mobility in these PeQDs is 0.880 cm2 V-1 s-1, underscoring their potential in optoelectronic applications. This study highlights the role of the silica matrix in enhancing the durability of PeQDs in humid environments and modifying exciton dynamics and photoluminescence, providing valuable insights for developing robust optoelectronic materials.

Cross-Linkable Fullerene Enables Elastic and Conductive Grain Boundaries for Efficient and Wearable Tin-Based Perovskite Solar Cells

Tin-based perovskite solar cells (TPSCs) have received increasing attention due to their low toxicity, high theoretical efficiency, and potential applications as wearable devices. However, the inherent fast and uncontrollable crystallization process of tin-based perovskites results in high defect density in the film. Meanwhile, when fabricated into flexible devices, the prepared perovskite film exhibits inevitable brittleness and high Young's modulus, seriously weakening the mechanical stability. In this work, we design and synthesize a cross-linkable fullerene, thioctic acid functionalized C60 fulleropyrrolidinium iodide (FTAI), which has multiple interactions with perovskite components and can finely regulate the crystallization quality of perovskite film. The obtained perovskite film shows an increased grain size and a more matched energy level with the electron transport material, effectively improving the carrier extraction efficiency. The FTAI-based rigid device achieves a champion efficiency of 14.91 % with enhanced stability. More importantly, the FTAI located at the perovskite grain boundaries could spontaneously cross-link during the perovskite annealing process, which effectively improves the conductivity and elasticity of grain boundaries, thereby giving the film excellent bending resistance. Finally, the FTAI-based wearable device yields a record efficiency of 12.35 % and displays robust bending durability, retaining about 90 % of the initial efficiency after 10,000 bending times.

Narrow Bandgap Metal Halide Perovskites for All-Perovskite Tandem Photovoltaics

All-perovskite tandem solar cells are attracting considerable interest in photovoltaics research, owing to their potential to surpass the theoretical efficiency limit of single-junction cells, in a cost-effective sustainable manner. Thanks to the bandgap-bowing effect, mixed tin-lead (Sn-Pb) perovskites possess a close to ideal narrow bandgap for constructing tandem cells, matched with wide-bandgap neat lead-based counterparts. The performance of all-perovskite tandems, however, has yet to reach its efficiency potential. One of the main obstacles that need to be overcome is the─oftentimes─low quality of the mixed Sn-Pb perovskite films, largely caused by the facile oxidation of Sn(II) to Sn(IV), as well as the difficult-to-control film crystallization dynamics. Additional detrimental imperfections are introduced in the perovskite thin film, particularly at its vulnerable surfaces, including the top and bottom interfaces as well as the grain boundaries. Due to these issues, the resultant device performance is distinctly far lower than their theoretically achievable maximum efficiency. Robust modifications and improvements to the surfaces of mixed Sn-Pb perovskite films are therefore critical for the advancement of the field. This Review describes the origins of imperfections in thin films and covers efforts made so far toward reaching a better understanding of mixed Sn-Pb perovskites, in particular with respect to surface modifications that improved the efficiency and stability of the narrow bandgap solar cells. In addition, we also outline the important issues of integrating the narrow bandgap subcells for achieving reliable and efficient all-perovskite double- and multi-junction tandems. Future work should focus on the characterization and visualization of the specific surface defects, as well as tracking their evolution under different external stimuli, guiding in turn the processing for efficient and stable single-junction and tandem solar cell devices.

Multifunctional Trifluoroborate Additive for Simultaneous Carrier Dynamics Governance and Defects Passivation to Boost Efficiency and Stability of Inverted Perovskite Solar Cells

The main obstacles to promoting the commercialization of perovskite solar cells (PSCs) include their record power conversion efficiency (PCE), which still remains below the Shockley-Queisser limit, and poor long-term stability, attributable to crystallographic defects in perovskite films and open-circuit voltage (Voc) loss in devices. In this study, potassium (4-tert-butoxycarbonylpiperazin-1-yl) methyl trifluoroborate (PTFBK) was employed as a multifunctional additive to target and modulate bulk perovskite defects and carrier dynamics of PSCs. Apart from simultaneously passivating anionic and cationic defects, PTFBK could also optimize the energy-level alignment of devices and weaken the interaction between carriers and longitudinal optical phonons, resulting in a carrier lifetime of greater than 3 μs. Furthermore, it inhibited non-radiative recombination and improved the crystallization capacity in the target perovskite film. Hence, the target rigid and flexible p-i-n PSCs yielded champion PCEs of 24.99 % and 23.48 %, respectively. More importantly, due to hydrogen bonding between formamidinium and fluorine, the target devices exhibited remarkable thermal, humidity, and operational tracking at maximum power point stabilities. The reduced Young's modulus and residual stress in the perovskite layer also provided excellent bending stability for flexible target devices.

Supramolecular Polyurethane "Ligaments" Enabling Room-Temperature Self-Healing Flexible Perovskite Solar Cells and Mini-Modules

Flexible perovskite solar cells (F-PSCs) have emerged as promising alternatives to conventional silicon solar cells for applications in portable and wearable electronics. However, the mechanical stability of inherently brittle perovskite, due to residual lattice stress and ductile fracture formation, poses significant challenges to the long-term photovoltaic performance and device lifetime. In this paper, to address this issue, a dynamic "ligament" composed of supramolecular poly(dimethylsiloxane) polyurethane (DSSP-PPU) is introduced into the grain boundaries of the PSCs, facilitating the release of residual stress and softening of the grain boundaries. Remarkably, this dynamic "ligament" exhibits excellent self-healing properties and enables the healing of cracks in perovskite films at room temperature. The obtained PSCs have achieved power conversion efficiencies of 23.73% and 22.24% for rigid substrates and flexible substrates, respectively, also 17.32% for flexible mini-modules. Notably, the F-PSCs retain nearly 80% of their initial efficiency even after subjecting the F-PSCs to 8000 bending cycles (r = 2 mm), which can further recover to almost 90% of the initial efficiency through the self-healing process. This remarkable improvement in device stability and longevity holds great promise for extending the overall lifetime of F-PSCs.