Potential enthalpic energy of water in oils exploited to control supramolecular structure

A Supramolecular Nanosheet Assembled from Carpyridines and Water

The use of water as a solvent to facilitate supramolecular self-assembly and polymerization is well-documented; however, it is rare that water acts as a monomer that undergoes polymerization. We report the formation of nanosheets composed of water and a saddle-shaped porphyrinoid macrocycle, carpyridine, which allows for linearly stacked, eclipsed columns within formed 2D structures. Self-assembling carpyridine monomers from solutions with different extents of wetness permit the formation of nanosheets that appear identical by microscopy. Structural analysis through electron diffraction reveals fundamental changes in the local organization. Under dry conditions, carpyridine stacks are formed through π-π interactions between curved surfaces, whereas in solutions containing greater quantities of water, a hydrogen-bonded water-to-carpyridine-core network is propagated throughout perfectly linear columns. The observed wet phase can be interconverted to a dry one through vapor annealing, indicating an accessible energy surface of polymorphism.

Elucidating the Boundary of Intercalation vs Sequestration in Supramolecular Polymers by Retrosynthetic Design Toward the Construction of Complex Supramolecular Systems

Controlled social self-sorting by intercalation can offer distinct properties at the supramolecular level that go beyond the sum of its parts. Likewise, controlling narcissistic self-sorting by sequestration can induce unique system properties. In contrast, the interface between the two cases has hitherto remained underexplored, and clear design rules remain elusive. Herein it is demonstrated that by fine-tuning the molecular similarity of supramolecular synthons, intricate control over concerted supramolecular equilibria can be achieved. By reducing the molecular similarity, a former intercalator can be tuned to become a strong or weak sequestrator. Understanding these roles in binary mixtures allows to rationalize more complex tertiary systems. Consequently, the influence of an uncommon dual sequestration mechanism is revealed. Further, an unprecedented hybrid mechanism between supramolecular intercalation and sequestration can be demonstrated. We are hopeful that the results presented herein will contribute to the development and understanding of concerted processes in complex supramolecular systems.

How Preparation Protocols Control the Rheology of Organoclay Gels

We elucidate the effect of preparation conditions on the rheological properties of organophilic clays consisting of platelet-like primary particles, VG69 (trademark of SLB) dispersed in oil, by varying the homogenization rate, homogenization temperature, and amount of added water. We establish that stable, nonsedimenting gel formation requires homogenization temperatures higher than 45 °C and the addition of a small amount of water during the homogenization stage. Dried organoclay dispersions, on the other hand, do not form stable gels, independent of the homogenization rate and temperature, suggesting the existence of only weak attractions in the absence of water molecules. Water-induced attraction is necessary to form gels, probably through hydrogen bonding between the silanol group of clay particles and water molecules. Moreover, the effect of homogenization temperature is related to the extent of exfoliation during the homogenization stage as confirmed by X-ray scattering. The gel plateau modulus, G p, is found to increase with clay concentration as G P ∼ c clay 3.9, typical of fractal gel networks. More interestingly, a linear increase in the elastic modulus with water concentration is observed over a wide range of water concentrations, while analyzing the effective yield strain deduced from the yield stress and elastic modulus reveals the existence of three regimes. We finally present dynamic state diagrams that clearly indicate the required conditions for the creation of stable gels and demonstrate the importance of controlling the preparation protocols in the formulation of clay dispersions and gels with desirable structural and mechanical properties.

Biplane Ion-Pairing Induced Supramolecular Assembly for High-Performance Uranium Detection

It is still challenging to directly recognize the anionic species [UO2(CO3)3]4-, the dominant species in the environment (82%-93%), using current optical probes because of the adverse effects of its thick hydration shell on binding interactions. In this study, a water-soluble Pt(II) methylated terpyridine complex ([Pt(CH3-tpy)NCO]+) supramolecular probe is designed to directly target [UO2(CO3)3]4- by a new strategy of thick hydration shell overlapping arrangement. The optical response demonstrates excellent selectivity among ≈30 investigated interfering substances, along with rapid response (≈15 s), high sensitivity (64.1 nm) and dual-signals. It is confirmed both experimentally and theoretically that the superior detection performance is attributed to the formation of a unique supramolecular structure featuring biplane-like building block, bicolumnar stacking and water-bridged anionic networks, via the overlap of thick hydration shells of aligned [UO2(CO3)3]4- to boost a superentropic driving force, and the distinguishable dual-signals arises from the emergence of four types of Pt-Pt interactions, generating low-energy metal-to-metal charge transfer adsorption/emission. In addition, a [Pt(CH3-tpy)NCO]+-based hydrogel platform is constructed for detecting both anionic and cationic uranium, with a detection limit of 14.89 fg. This work unlocks not only a way to directly detect [UO2(CO3)3]4-, but also a new idea for sensing ions with extreme thick hydration layers.

Self-Assembly of Quinazolinedione Rosettes

A quinazoline-2,4(1H,3H)-dione bearing a phenylene moiety and aliphatic tails was synthesized as an alternative self-assembling building block to barbiturate molecules, aiming to achieve enhanced hydrolysis resistance. The compound self-assembles in non-polar solvents to form linear supramolecular polymers via the formation of hydrogen-bonded cyclic hexamers (rosettes), a process confirmed by powder X-ray diffraction (PXRD) analysis of the bulk material. Our results demonstrate that quinazoline-2,4(1H,3H)-dione serves as an effective hydrogen-bonding building block, suggesting its potential to form stable supramolecular polymers from versatile π-conjugated molecules.

Enhanced Stability and Properties of Benzene-1,3,5-Tricarboxamide Supramolecular Copolymers through Engineered Coupled Equilibria

Improving the stability of multi-component and functional assemblies such as supramolecular copolymers without impeding their dynamicity is key for their implementation as innovative materials. Up to now, this has been achieved by a trial-and-error approach, requiring the time-consuming characterization of a series of supramolecular coassemblies. We report herein that this is possible to significantly enhance the stability of supramolecular copolymers by a minimal change in the chemical nature of one of the interacting monomers. This is achieved by replacing an ester function by an ether function in the structure of a chiral benzene-1,3,5-tricarboxamide (BTA) monomer, used as "sergeant", coassembled with achiral monomers, the "soldiers". Pseudo-phase diagrams, constructed by probing the nature of the coassemblies with multifarious analytical techniques, confirm that the greater stability of the resulting copolymers is mainly due to the minimization of competing species. This leads to better rheological and catalytic properties of the corresponding supramolecular copolymers. Favouring coassembly over undesired assembly pathways must be considered as a blueprint for the development of better-performing supramolecular multi-component systems.

Chiral Self-Assembly of a Pyrene-Appended Glutamylalanine Dipeptide and Its Charge Transfer Complex: Fabrication of Magneto-Responsive Hydrogels and Human Cell Imaging

The formation of a robust, self-healing hydrogel of a novel pyrene-appended dipeptide, Py-E-A (L-Glutamic acid short as E; L-Alanine short as A) is demonstrated. Detailed studies suggest that nanoscopic fibers with a length of several micrometers have formed by chiral self-organization of Py-E-A gelators. Additionally, live human PBMCs imaging is shown using the Py-E-A fluorophore. Interestingly, electron-rich Py-E-A couples with electron-deficient NDI-β-A (β-Alanine short as β-A) by charge transfer (CT) complexation and forms stable deep violet-colored CT super-hydrogel. X-ray diffraction, DFT, and 2D ROESY NMR studies suggest lamellar packing of both Py-E-A and the alternating CT stack in its hydrogel matrixes. Supramolecular chirality of the Py-E-A donor can be altered by adding an achiral acceptor NDI-β-A. Notably, the fibers of the CT hydrogel are found to be even thinner than the Py-E-A fibers, which, in turn, makes the CT hydrogel more tolerant to the applied strain. Further, the self-healing and injectable properties of the hydrogels are shown. Finally, the magneto-responsive behavior of the Py-E-A and CT hydrogels loaded with spin-canted Cu-ferrite (Cu0.6Zn0.4Fe2O4) nanoparticles (NPs) is demonstrated. The presence of magnetic NPs within the hydrogels has changed the fibrous morphology to rod-like nanoclusters.

Influence of Tacticity on the Self-Assembly of Poly(ethylene glycol)-b-poly(lactic acid) Block Copolymers

Lactide, possessing two stereocenters and thus three distinct configurations (DD, DL, and LL), serves as a captivating building block for polymers and self-assembly. Notably, polylactide (PLA) exhibits stereocomplexation, displaying heightened interactions between different configurations compared with interactions within the same configuration. This characteristic renders PLA an intriguing subject for investigating self-assembly behavior. In this study, 22 PEG-b-PLA polymers were synthesized and self-assembled, with analysis conducted through NMR and cryo-TEM techniques. A range of morphologies, including vesicles, diamond-shaped lamellae, and branched networks, were achieved by manipulating the tacticities. Enhanced comprehension of self-assembly interactions holds promise for advancing molecular recognition, self-replication, and asymmetric catalysis.

Chiral Symmetry Breaking in Nanocrystal Superlattices Enabled by Shear and Nanowires

The self-assembly of colloidal nanocrystals typically leads to the formation of highly symmetric superlattices, while chiral symmetry breaking within these structures remains rare. Here, we present a universal approach for achieving chiral symmetry breaking within self-assembled nanocrystal superlattices through the incorporation of nanowires and shear force. The networked film, composed of highly flexible nanowires that are only a few nanometers in diameter and bound by weak van der Waals interactions, can be manipulated to stretch and rotate, resulting in a controlled chiral pattern with a specified handedness. When combined with nanocrystal superlattices, the nanowires convey mechanical torque to the nanocrystals, inducing chiral symmetry breaking in the solid materials. This method is versatile and can be applied to various nanocrystal solids irrespective of their size, shape, or composition. Overall, this study enhances the repertoire of fabrication techniques for chiral nanomaterials, circumventing the need for chiral molecules.

Pathway-directed recyclable chirality inversion of coordinated supramolecular polymers

It remains challenging to elucidate the fundamental mechanisms behind the dynamic chirality inversion of supramolecular assemblies with pathway complexity. Herein, metal coordination driven assembly systems based on pyridyl-conjugated cholesterol (PVPCC) and metal ions (Ag+ or Al3+) are established to demonstrate pathway-directed, recyclable chirality inversion and assembly polymorphism. In the Ag(I)/PVPCC system, a competitive pathway leads Ag-Complex to form either kinetically controlled supramolecular polymer (Ag-SP I) or thermodynamically favored Ag-SP II, accompanied by reversible chiroptical inversion. Conversely, the Al(III)/PVPCC system displays a solvent-assisted consecutive pathway: the Al-Complex initially forms ethanol-containing Al-SP II, and subsequently converts into ethanol-free Al-SP I with opposite chiroptical performance upon thermal treatment. Moreover, stable chirality inversion in the solid state enables potential dynamic circularly polarized luminescence encryption when Ag(I)/PVPCC is co-assembled with thioflavin T. These findings provide the guidance for the dynamic modulation of chirality functionality in supramolecular materials for applications in information processing, data encryption, and chiral spintronics.

Pathway Selection in Temporal Evolution of Supramolecular Polymers of Ionic π-Systems: Amphiphilic Organic Solvent Dictates the Fate of Water

Understanding solvent-solute interactions is essential to designing and synthesising soft materials with tailor-made functions. Although the interaction of the solute with the solvent mixture is more complex than the single solvent medium, solvent mixtures are exciting to unfold several unforeseen phenomena in supramolecular chemistry. Here, we report two unforeseen pathways observed during the hierarchical assembly of cationic perylene diimides (cPDIs) in water and amphiphilic organic solvent (AOS) mixtures. When the aqueous supramolecular polymers (SPs) of cPDIs are injected into AOS, initially kinetically trapped short SPs are formed, which gradually transform into thermodynamically stable high aspect ratio SP networks. Using various experimental and theoretical investigations, we found that this temporal evolution follows two distinct pathways depending on the nature of the water-AOS interactions. If the AOS is isopropanol (IPA), water is released from cPDIs into bulk IPA due to strong hydrogen bonding interactions, which further decreases the monomer concentration of cPDIs (Pathway-1). In the case of dioxane AOS, cPDI monomer concentration further increases as water is retained among cPDIs (Pathway-2) due to relatively weak interactions between dioxane and water. Interestingly, these two pathways are accelerated by external stimuli such as heat and mechanical agitation.

Supramolecular Polymerization as a Tool to Reveal the Magnetic Transition Dipole Moment of Heptazines

Heptazine derivatives have attracted significant interest due to their small S1-T1 gap, which contributes to their unique electronic and optical properties. However, the nature of the lowest excited state remains ambiguous. In the present study, we characterize the lowest optical transition of heptazine by its magnetic transition dipole moment. To measure the magnetic transition dipole moment, the flat heptazine must be chiroptically active, which is difficult to achieve for single heptazine molecules. Therefore, we used supramolecular polymerization as an approach to make homochiral stacks of heptazine derivatives. Upon formation of the supramolecular polymers, the preferred helical stacking of heptazine introduces circular polarization of absorption and fluorescence. The magnetic transition dipole moments for the S1 ← S0 and S1 → S0 are determined to be 0.35 and 0.36 Bohr magneton, respectively. These high values of magnetic transition dipole moments support the intramolecular charge transfer nature of the lowest excited state from nitrogen to carbon in heptazine and further confirm the degeneracy of S1 and T1.

Functionalization of Supramolecular Polymers by Dynamic Covalent Boroxine Chemistry

Molecular scaffolds that enable the combinatorial synthesis of new supramolecular building blocks are promising targets for the construction of functional molecular systems. Here, we report a supramolecular scaffold based on boroxine that enables the formation of chiral and ordered 1D supramolecular polymers, which can be easily functionalized for circularly polarized luminescence. The boroxine monomers are quantitatively synthesized in situ, both in bulk and in solution, from boronic acid precursors and cooperatively polymerize into 1D helical aggregates stabilized by threefold hydrogen-bonding and π-π stacking. We then demonstrate amplification of asymmetry in the co-assembly of chiral/achiral monomers and the co-condensation of chiral/achiral precursors in classical and in situ sergeant-and-soldiers experiments, respectively, showing fast boronic acid exchange reactions occurring in the system. Remarkably, co-condensation of pyrene boronic acid with a hydrogen-bonding chiral boronic acid results in chiral pyrene aggregation with circularly polarized excimer emission and g-values in the order of 10-3. Yet, the electron deficiency of boron in boroxine makes them chemically addressable by nucleophiles, but also sensitive to hydrolysis. With this sensitivity in mind, we provide first insights into the prospects offered by boroxine-based supramolecular polymers to make chemically addressable, functional, and adaptive systems.

Water-Regulated Evolution of Inversion, Reinversion, and Amplification of Circularly Polarized Luminescence of Supramolecular Organogels Based on Glutamide-Cyanostilbene Amphiphile

Water incorporated with supramolecular building blocks in organic solvents can play a key role in the circularly polarized luminescence (CPL) inversion and amplification of supramolecular assemblies. Herein, we demonstrate that fine-tuning the water content regulated the assembly structure evolution and made the circular dichroism and CPL sign of the system undergo intriguing inversion, reinversion, and amplification processes based on a unique and interesting glutamide-cyanostilbene system, as supported by morphology, spectroscopic observations, and time-dependent density functional theory calculation.

Noncovalent Catalyst-cum-Inhibitor Directed Supramolecular Pathway Selection and Asymmetry Amplification by Aggregate Cross-Nucleation

The key to any controlled supramolecular polymerization (CSP) process lies in controlling the nucleation step, which is typically achieved by sequestering monomers in a kinetically trapped state. However, kinetic traps that are shallow cannot prevent spontaneous nucleation, thus limiting the applicability of the CSP in such systems. We use a molecular additive to overcome this limitation by modifying the energy landscape of a competitive self-assembly process and increasing the kinetic stability of an otherwise short-lived trap state. The additive achieves this by simultaneously catalyzing OFF-pathway nucleation and inhibiting ON-pathway aggregation. In the process, it guides the molecular assembly exclusively toward the OFF-pathway aggregate analogue. The mechanisms of OFF-pathway catalysis and ON-pathway inhibition are elucidated. By specifically targeting the nucleation step, it was possible to achieve pathway selection at an extremely low additive-to-monomer ratio of 1:100. The generality of our approach is also demonstrated for other related molecular systems. Finally, removing the additive triggers the cross-nucleation of the ON-pathway aggregate on the surface of a less stable, OFF-pathway aggregate analogue. The resultant supramolecular polymer not only exhibits a more uniform morphology but more importantly, a marked improvement in the structural order that leads to an amplification of chiral asymmetry and a high absorption dissymmetry factor (gAbs) of ∼0.05.

Revealing Pathway Complexity and Helical Inversion in Supramolecular Assemblies Through Solvent-Induced Radical Disparities

New insights are raised to interpret pathway complexity in the supramolecular assembly of chiral triarylamine tris-amide (TATA) monomer. In cosolvent systems, the monomer undergoes entirely different assembly processes depending on the chemical feature of the two solvents. Specifically, 1,2-dichloroethane (DCE) and methylcyclohexane (MCH) cosolvent trigger the cooperative growth of monomers with M helical arrangement, and hierarchical thin nanobelts are further formed. But in DCE and hexane (HE) combination, a different pathway occurs where monomers go through isodesmic growth to generate twisted nanofibers with P helical arrangement. Moreover, the two distinct assemblies exhibit opposite excited-state chirality. The driving force for both assemblies is the formation of intermolecular hydrogen bonds between amide moieties. However, the mechanistic investigation indicates that radical and neutral triarylamine species go through distinct assembly phases by changing solvent structures. The neutralization of radicals in MCH plays a critical role in pathway complexity, which significantly impacts the overall supramolecular assembly process, giving rise to inversed supramolecular helicity and distinct morphologies. This differentiation in pathways affected by radicals provides a new approach to manipulate chiral supramolecular assembly process by facile solvent-solute interactions.

Solvent effects in anion recognition

Anion recognition is pertinent to a range of environmental, medicinal and industrial applications. Recent progress in the field has relied on advances in synthetic host design to afford a broad range of potent recognition motifs and novel supramolecular structures capable of effective binding both in solution and at derived molecular films. However, performance in aqueous media remains a critical challenge. Understanding the effects of bulk and local solvent on anion recognition by host scaffolds is imperative if effective and selective detection in real-world media is to be viable. This Review seeks to provide a framework within which these effects can be considered both experimentally and theoretically. We highlight proposed models for solvation effects on anion binding and discuss approaches to retain strong anion binding in highly competitive (polar) solvents. The synthetic design principles for exploiting the aforementioned solvent effects are explored.

Shape-Assisted Self-Assembly of Hexa-Substituted Carpyridines into 1D Supramolecular Polymers

The extent of the influence that molecular curvature plays on the self-assembly of supramolecular polymers remains an open question in the field. We began addressing this fundamental question with the introduction of "carpyridines", which are saddle-shaped monomers that can associate with one another through π-π interactions and in which the rotational and translational movements are restricted. The topography displayed by the monomers led, previously, to the assembly of highly ordered 2D materials even in the absence of strong directional interactions such as hydrogen bonding. Here, we introduce a simple strategy to gain control over the dimensionality of the formed structures yielding classical unidimensional polymers. These have been characterized using well-established protocols allowing us to determine and confirm the self-assembly mechanism of both fibers and sheets. The calculated interaction energies are significantly higher than expected for flexible self-assembling units lacking classical "strong" non-covalent interactions. The versatility of this supramolecular unit to assemble into either supramolecular fibers or 2D sheets with strong association energies highlights remarkably well the potential and importance of molecular shape for the design of supramolecular materials and the applications thereof.

Stimuli-responsive synthetic helical polymers

Synthetic dynamic helical polymers (supramolecular and covalent) and foldamers share the helix as a structural motif. Although the materials are different, these systems also share many structural properties, such as helix induction or conformational communication mechanisms. The introduction of stimuli responsive building blocks or monomer repeating units in these materials triggers conformational or structural changes, due to the presence/absence of the external stimulus, which are transmitted to the helix resulting in different effects, such as assymetry amplification, helix inversion or even changes in the helical scaffold (elongation, J/H helical aggregates). In this review, we show through selected examples how different stimuli (e.g., temperature, solvents, cations, anions, redox, chiral additives, pH or light) can alter the helical structures of dynamic helical polymers (covalent and supramolecular) and foldamers acting on the conformational composition or molecular structure of their components, which is also transmitted to the macromolecular helical structure.

Water-Assisted Programmable Assembly of Flexible and Self-Standing Janus Membranes

Janus membranes with asymmetric wettability have been considered cutting-edge for energy/environmental-sustainable applications like water/fog harvester, breathable skin, and smart sensor; however, technical challenges in fabrication and accurate regulation of asymmetric wettability limit their development. Herein, by using water-assisted hydrogen-bonded (H-bonded) assembly of small molecules at water/oil interface, a facile strategy is proposed for one-step fabrication of membranes with well-regulable asymmetric wettability. Asymmetric orderly patterns, beneficial for mass transport based on abundant high-permeability sites and large surface area, are constructed on opposite membrane surfaces. Upon tuning water-assisted H-bonding via H-sites/configuration design and temperature/pH modulation, double-hydrophobic, double-hydrophilic, and hydrophobic-hydrophilic membranes are facilely fabricated. The Janus membranes show smart vapor-responsive curling and unidirectional water transport with promising flux of 1158±25 L m-2  h-1 under natural gravity and 31500±670 L·(m-2  h-1  bar-1 ) at negative pressure. This bottom-up approach offers a feasible-to-scalable avenue to precise-manipulation of Janus membranes for advanced applications, providing an effective pathway for developing tailor-made self-assembled nanomaterials.

Superstructure-Induced Hierarchical Assemblies for Nanoconfined Photocatalysis

Most attempts to synthesize supramolecular nanosystems are limited to a single mechanism, often resulting in the formation of nanomaterials that lack diversity in properties. Herein, hierarchical assemblies with appropriate variety are fabricated in bulk via a superstructure-induced organic-inorganic hybrid strategy. The dynamic balance between substructures and superstructures is managed using covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as dual building blocks to regulate the performances of hierarchical assemblies. Significantly, the superstructures resulting from the controlled cascade between COFs and MOFs create highly active photocatalytic systems through multiple topologies. Our designed tandem photocatalysis can precisely and efficiently regulate the conversion rates of bioactive molecules (benzo[d]imidazoles) through competing redox pathways. Furthermore, benzo[d]imidazoles catalyzed by such supramolecular nanosystems can be isolated in yields ranging from 70 % to 93 % within tens of minutes. The multilayered structural states within the supramolecular systems demonstrate the importance of hierarchical assemblies in facilitating photocatalytic propagation and expanding the structural repertoire of supramolecular hybrids.

Controlled Noncovalent Synthesis of Secondary Supramolecular Polymers

Dynamic supramolecular polymers, with their functional similarities to classical covalent polymers and their adaptive and self-repairing nature reminiscent of biological assemblies, have emerged as highly promising systems for the design of smart soft materials. Recent advancements in mechanistic investigations and novel synthetic strategies, such as living supramolecular polymerization, have significantly enhanced our ability to control the primary structure of these supramolecular polymers. However, realizing their full functional potential requires expanding their topological diversity in a manner akin to classical polymers as well as achieving precise molecular organization at higher hierarchical levels of self-assembly. In this paper, we present a remarkable advancement in this field, introducing an unprecedented and controlled synthesis of secondary supramolecular polymers. Our innovative strategy combines chirality-controlled surface-catalyzed secondary nucleation and a bioinspired peptide design, effectively stabilizing higher-order assembly. Furthermore, by harnessing this stereoselective nucleation process, we demonstrate the successful synthesis of racemic supramolecular polymers featuring parallelly stacked conglomerate microstructures─a previously unreported topology in synthetic self-assembled systems. Additionally, we elucidate that the extent of secondary supramolecular polymers can be regulated by modulating the enantiomeric excess of the chiral monomers. Consequently, our study unveils new topologies that exhibit enhanced higher-order structural complexity in the realm of supramolecular polymers.

Stereoselective Assembly of Hydrogen-Bonded Anionic Cages Dictated by Organophosphate-Based Chiral Nodes

Inspired by the signal transduction function of organophosphates in biological systems, bioactive organophosphates were utilized for the first time as chiral nodes to dictate the stereoselective assembly of hydrogen-bonded anionic cages. Phosphonomycin (antibiotics), tenofovir (antivirals), adenosine monophosphate (natural product, AMP) and clindamycin phosphate (antibiotics) were assembled with an achiral bis-monourea ligand, thereby leading to the stereoselective formation of quadruple or triple helicates. The extent of the stereoselectivity could be enhanced by either lowering the temperature or adding stronger-binding cations as templates. With the chiral anionic cages as the host, some enantioselectivity was achieved when binding chiral quaternary ammonium cations.

Simulating Assembly Landscapes for Comprehensive Understanding of Supramolecular Polymer-Solvent Systems

Complexity in supramolecular polymer systems arises from interactions between different components, including solvent molecules. By varying their concentration or temperature in such multicomponent systems, complex phenomena can occur such as thermally bisignate and dilution-induced assembly of supramolecular polymers. Herein, we demonstrate that both these phenomena emerge from the same underlying interaction mechanism between the components. As a model system, amide-decorated supramolecular polymers of porphyrins were investigated in combination with aliphatic alcohols as hydrogen-bond scavengers, and thermodynamic mass-balance models were applied to map the three-dimensional assembly landscapes. These studies unveiled that the interaction between hydrogen-bond scavengers and monomers is temperature-dependent and becomes dominant at high monomer concentrations. With these insights, we could exploit competitive monomer-alcohol interactions to prompt the dilution-induced assembly of various common monomers as well as bisignate assembly events. Moreover, kinetic insights were obtained by navigating through the assembly landscape. Similar to phase diagrams of covalent polymers, these assembly landscapes provide a comprehensive picture of supramolecular polymerizations, which helps to precisely regulate the system properties. The generality of this approach using assembly landscapes makes it relevant for any supramolecular system, and this enhanced control will open the door to build complex and functional supramolecular polymer systems.

Selection of diverse polymorphic structures from a small dynamic molecular network controlled by the environment

The complex interplay between systems and their environment plays an important role in processes ranging from self-assembly to evolution. Polymorphism, where, from the same ingredients different products can be formed, is likely to be an important enabler for evolutionary adaptation. Environmental pressures may induce polymorphic behaviour, where different pressures result in different structural organisation. Here we show that by combining covalent and non-covalent bond formation three distinct polymorphs can emerge from the same small dynamic molecular network: vesicular aggregates, self-replicating fibres and nanoribbons, depending on the nature of the solvent environment. Additionally, a particular set of conditions allows the transient co-existence of both vesicles and fibres.

Real-time chirality transfer monitoring from statistically random to discrete homochiral nanotubes

Real time monitoring of chirality transfer processes is necessary to better understand their kinetic properties. Herein, we monitor an ideal chirality transfer process from a statistically random distribution to a diastereomerically pure assembly in real time. The chirality transfer is based on discrete trimeric tubular assemblies of planar chiral pillar[5]arenes, achieving the construction of diastereomerically pure trimers of pillar[5]arenes through synergistic effect of ion pairing between a racemic rim-differentiated pillar[5]arene pentaacid bearing five benzoic acids on one rim and five alkyl chains on the other, and an optically resolved pillar[5]arene decaamine bearing ten amines. When the decaamine is mixed with the pentaacid, the decaamine is sandwiched by two pentaacids through ten ion pairs, initially producing a statistically random mixture of a homochiral trimer and two heterochiral trimers. The heterochiral trimers gradually dissociate and reassemble into the homochiral trimers after unit flipping of the pentaacid, leading to chirality transfer from the decaamine and producing diastereomerically pure trimers.

Evolution of Transient Luminescent Assemblies Regulated by Trace Water in Organic Solvents

Trace water in organic solvents can play a crucial role in the construction of supramolecular assemblies, which has not gained enough attention until very recent years. Herein, we demonstrate that residual water in organic solvents plays a decisive role in the regulation of the evolution of assembled structures and their functionality. By adding Mg(ClO₄)₂ into a multi-component organic solution containing terpyridine-based ligand 3Tpy and monodentate imidazole-based ligand M2, the system underwent an unexpected kinetic evolution. Metallo-supramolecular polymers (MSP) formed first by the coordination of 3Tpy and Mg²⁺, but they subsequently decomposed due to the interference of M2, resulting in a transient MSP system. Further investigation revealed that this occurred because residual water in the solvent and M2 cooperatively coordinated with Mg²⁺. This allowed M2 to capture Mg²⁺ from MSP, which led to depolymerization. However, owing to the slow reaction between trace water/M2/Mg²⁺, the formation of MSP still occurred first. Therefore, water regulated both the thermodynamics and kinetics of the system and was the key factor for constructing the transient MSP. Fine-tuning the water content and other assembly motifs regulated the assembly evolution pathway, tuned the MSP lifetime, and made the luminescent color of the system undergo intriguing transition processes over time.

How Subtle Changes Can Make a Difference: Reproducibility in Complex Supramolecular Systems

The desire to construct complex molecular systems is driven by the need for technological (r)evolution and our intrinsic curiosity to comprehend the origin of life. Supramolecular chemists tackle this challenge by combining covalent and noncovalent reactions leading to multicomponent systems with emerging complexity. However, this synthetic strategy often coincides with difficult preparation protocols and a narrow window of suitable conditions. Here, we report on unsuspected observations of our group that highlight the impact of subtle "irregularities" on supramolecular systems. Based on the effects of pathway complexity, minute amounts of water in organic solvents or small impurities in the supramolecular building block, we discuss potential pitfalls in the study of complex systems. This article is intended to draw attention to often overlooked details and to initiate an open discussion on the importance of reporting experimental details to increase reproducibility in supramolecular chemistry.

A Chemically Recyclable Crosslinked Polymer Network Enabled by Orthogonal Dynamic Covalent Chemistry

Chemical recycling of synthetic polymers offers a solution for developing sustainable plastics and materials. Here we show that two types of dynamic covalent chemistry can be orthogonalized in a solvent-free polymer network and thus enable a chemically recyclable crosslinked material. Using a simple acylhydrazine-based 1,2-dithiolane as the starting material, the disulfide-mediated reversible polymerization and acylhydrazone-based dynamic covalent crosslinking can be combined in a one-pot solvent-free reaction, resulting in mechanically robust, tough, and processable crosslinked materials. The dynamic covalent bonds in both backbones and crosslinkers endow the network with depolymerization capability under mild conditions and, importantly, virgin-quality monomers can be recovered and separated. This proof-of-concept study show opportunities to design chemically recyclable materials based on the dynamic chemistry toolbox.

Dynamics and Rheology of Supramolecular Assemblies at Elevated Pressures

A methodology to investigate the linear viscoelastic properties of complex fluids at elevated pressures (up to 120 MPa) is presented. It is based on a dynamic light scattering (DLS) setup coupled with a stainless steel chamber, where the test sample is pressurized by means of an inert gas. The viscoelastic spectra are extracted through passive microrheology. We discuss an application to hydrogen-bonding motif 2,4-bis(2-ethylhexylureido)toluene (EHUT), which self-assembles into supramolecular structures (tubes and filaments) in apolar solvents dodecane and cyclohexane. High levels of pressure (roughly above 20 MPa) are found to slow down the terminal relaxation process; however, the increases in the entanglement plateau modulus and the associated persistence length are not significant. The concentration dependence of the plateau modulus, relaxation times (fast and slow), and correlation length is practically the same for all pressures and exhibits distinct power-law behavior in different regimes. Within the tube phase in dodecane, the relative viscosity increment is weakly enhanced with increasing pressure and reaches a plateau at about 60 MPa. In fact, depending on concentration, the application of pressure in the tube regime may lead to a transition from a viscous (unentangled) to a viscoelastic (partially entangled to well-entangled) solution. For well-entangled, long tubes, the extent of the plateau regime (ratio of high- to low-moduli crossover frequencies) increases with pressure. The collective information from these observations is summarized in a temperature-pressure state diagram. These findings provide ingredients for the formulation of a solid theoretical framework to better understand and exploit the role of pressure in the structure and dynamics of supramolecular polymers.

In situ Synthesis of Supramolecular Polymers: Finding the Right Conditions when Combining Covalent and Non-Covalent Synthesis

The combination of covalent and non-covalent synthesis is omnipresent in nature and potentially enables access to new materials. Yet, the fundamental principles that govern such a synthesis are barely understood. Here, we demonstrate how even simple reaction mixtures behave surprisingly complex when covalent reactions are coupled to self-assembly processes. Specifically, we study the reaction behavior of a system in which the in situ formation of discotic benzene-1,3,5-tricarboxamide (BTA) monomers is linked to an intertwined non-covalent reaction network including self-assembly into helical BTA polymers. This system shows an unexpected phase-separation behavior in which an interplay of reactant/product concentrations, side-products and solvent purity determines the system composition. We envision that these insights can bring us one step closer to how to design the synthesis of systems in a combined covalent/non-covalent fashion.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Shape-assisted self-assembly

Self-assembly and molecular recognition are critical processes both in life and material sciences. They usually depend on strong, directional non-covalent interactions to gain specificity and to make long-range organization possible. Most supramolecular constructs are also at least partially governed by topography, whose role is hard to disentangle. This makes it nearly impossible to discern the potential of shape and motion in the creation of complexity. Here, we demonstrate that long-range order in supramolecular constructs can be assisted by the topography of the individual units even in the absence of highly directional interactions. Molecular units of remarkable simplicity self-assemble in solution to give single-molecule thin two-dimensional supramolecular polymers of defined boundaries. This dramatic example spotlights the critical function that topography can have in molecular assembly and paves the path to rationally designed systems of increasing sophistication.

Self-assembly and molecular recognition usually depend on strong, directional non-covalent interactions but also topography can play a role in the formation of supramolecular constructs which makes it nearly impossible to discern the potential of shape and motion in the creation of complexity. Here, the authors demonstrate that long-range order in supramolecular constructs can be assisted by the topography of the individual units even in the absence of highly directional interactions.

Bottom-up supramolecular assembly in two dimensions

The self-assembly of molecules in two dimensions (2D) is gathering attention from all disciplines across the chemical sciences. Attracted by the interesting properties of two-dimensional inorganic analogues, monomers of different chemical natures are being explored for the assembly of dynamic 2D systems. Although many important discoveries have been already achieved, great challenges are still to be addressed in this field. Hierarchical multicomponent assembly, directional non-covalent growth and internal structural control are a just a few of the examples that will be discussed in this perspective about the exciting present and the bright future of two-dimensional supramolecular assemblies.

The self-assembly of molecules in two dimensions (2D) is gathering attention from all disciplines across the chemical sciences. This perspective discusses the main strategies to direct the supramolecular self-assembly of organic monomers in 2D.

Solvent-free autocatalytic supramolecular polymerization

Solvent-free chemical manufacturing is one of the awaited technologies for addressing an emergent issue of environmental pollution. Here, we report solvent-free autocatalytic supramolecular polymerization (SF-ASP), which provides an inhibition-free template-assisted catalytic organic transformation that takes great advantage of the fact that the product (template) undergoes a termination-free nucleation-elongation assembly (living supramolecular polymerization) under solvent-free conditions. SF-ASP allows for reductive cyclotetramerization of hydrogen-bonding phthalonitriles into the corresponding phthalocyanines in exceptionally high yields (>80%). SF-ASP requires the growing polymer to form hexagonally packed crystalline fibres, which possibly preorganize the phthalonitriles at their cross-sectional edges for their efficient transformation. With metal oleates, SF-ASP produces single-crystalline fibres of metallophthalocyanines again in exceptionally high yields, which grow in both directions without terminal coupling until the phthalonitrile precursors are completely consumed. By taking advantage of this living nature of polymerization, multistep SF-ASP without/with metal oleates allows for the precision synthesis of multi-block supramolecular copolymers.

Elucidating the Supramolecular Copolymerization of N- and C-Centered Benzene-1,3,5-Tricarboxamides: The Role of Parallel and Antiparallel Packing of Amide Groups in the Copolymer Microstructure

An in-depth study of the supramolecular copolymerization behavior of N- and C-centered benzene-1,3,5-tricarboxamides (N- and C-BTAs) has been conducted in methylcyclohexane and in the solid state. The connectivity of the amide groups in the BTAs differs, and mixing N- and C-BTAs results in supramolecular copolymers with a blocky microstructure in solution. The blocky microstructure results from the formation of weaker and less organized, antiparallel hydrogen bonds between N- and C-BTAs. In methylcyclohexane, the helical threefold hydrogen-bonding network present in C- and N-BTAs is retained in the mixtures. In the solid state, in contrast, the hydrogen bonds of pure BTAs as well as their mixtures organize in a sheet-like pattern, and in the mixtures long-range order is lost. Drop-casting to kinetically trap the solution microstructures shows that C-BTAs retain the helical hydrogen bonds, but N-BTAs immediately adopt the sheet-like pattern, a direct consequence of the lower stabilization energy of the helical hydrogen bonds. In the copolymers, the stability of the helical aggregates depends on the copolymer composition, and helical aggregates are only preserved when a high amount of C-BTAs is present. The method outlined here is generally applicable to elucidate the copolymerization behavior of supramolecular monomers both in solution as well as in the solid state.

Computational Insights into the Aggregation Pathway of Self-Assembled Nanotubules

We performed molecular dynamics simulations of self-assembled supramolecular nanotubules constructed from amphiphiles with bent-shaped rods. By systematically examining the structure from dimeric aggregates to the fully developed nanotubule, we identified the basic building block of the nanotubule and the optimal dimensions of its stable structure which are consistent with experimental findings. Moreover, we demonstrate that the cooperative interplay of different interactions drives aggregation by selecting and stabilizing the optimal self-assembled structures for various intermediates through a complex pathway. Additionally, contraction of the nanotubule, which accompanies the dehydration process, was observed upon heating. It is suggested that the optimal stability of the self-assembled aggregates is achieved by balancing entropic and enthalpic contributions, of which the ratio is a critical factor that drives the aggregation pathway.

Encapsulation of phenolic compounds within food-grade carriers and delivery systems by pH-driven method: a systematic review

In comparison to conventional encapsulation methods of phenolic compounds (PCs), pH-driven method is green, simple and requires low energy consumption. It has a huge potential for industrial applications, and can overcome more effectively the aqueous solubility, stability and bioavailability issues related to PCs by changing pH to induce the encapsulation of PCs. This review aims to shed light on the use of pH-driven method for encapsulating PCs. The preparation steps and principles governing pH-driven method using various carriers and delivery systems are provided. A comparison of pH-driven with other methods is also presented. To circumvent the drawbacks of pH-driven method, improvement strategies are proposed. The essence of pH-driven method relies simultaneously on alkalization and acidification to bind PCs and carriers. It is used for the development of nanoemulsions, liposomes, edible films, nanoparticles, nanogels and functional foods. As a result of pH-driven method, PCs-loaded carriers may have smaller size, high encapsulation efficiency, more sustained-release and good bioavailability, due mainly to effects of pH change on the structure and properties of PCs as well as carriers. Finally, modification of wall materials and type of acidifier are considered as efficient approaches to improve the pH-driven method.

Temperature-dependent modulation by biaryl-based monomers of the chain length and morphology of biphenyl-based supramolecular polymers

Supramolecular copolymerizations offer attractive options to introduce structural and functional diversity in supramolecular polymer materials. Yet, general principles and structure–property relationships for rational comonomer design remain lacking. Here, we report on the supramolecular (co)aggregation of a phenylpyridine and bipyridine derivative of a recently reported biphenyl tetracarboxamide-based monomer. We show that both arylpyridines are poor monomers for supramolecular homopolymerizations. However, the two arylpyridines efficiently influence supramolecular polymers of a biphenyl-based polymer. The phenylpyridine derivatives primarily sequestrate biphenyl monomers, while the bipyridine intercalates into the polymers at high temperatures. Thereby, these two poorly homopolymerizing monomers allow for a fine control over the length of the biphenyl-based supramolecular polymers. As such, our results highlight the potential to control the structure and morphology of supramolecular polymers by tailoring the electronic properties of additives.

Supramolecular copolymerizations offer attractive options to introduce structural and functional diversity in supramolecular polymer materials.