Metabolic activity of mature biofilms of Mycobacterium tuberculosis and other non-tuberculous mycobacteria

Method to evaluate the microbial degradation activity in silage, cow rumen with in vitro test, and in manure and slurry

Microorganisms are present everywhere and can influence a variety of processes. In agriculture and husbandry, the level of microbial activity can be crucial information, yet the methods for determining microbial activity are usually very long, complex, and costly. In this work, a novel and easy-to-use method, already in use for determining soil microbial activity, named Fertimetro was tested as a fast and cheap solution for measuring microbial activity in silages, in vitro rumen fluids, and manure and slurry. The method was adjusted for the specific conditions of the new testing environments. The results indicate that this method is adequate for measuring cellulolytic microbial activity in vitro rumen fluids, with a coefficient of repeatability (RT%) 92.2 at 24 h and 87.5 at 48 h, and also for cellulolytic microbial activity measures in manure RT% 39.0. While, due to the specific conditions in silages and slurry, this method is less adequate for measuring cellulolytic microbial activity in these environments. This work demonstrates that Fertimetro method can be used in different environments as an easy and cheaper alternative for measuring microbial activity, especially if the interest is only in quantifying the microbial activity and not in knowing the microbial species.1.Fertimetro is an easy-to-use and not costly method to evaluate microbial activity in different environments.2.This method is very adequate for measuring cellulolytic microbial activity in vitro rumen fluids and manure.

Emerging Approaches for Mitigating Biofilm-Formation-Associated Infections in Farm, Wild, and Companion Animals

The importance of addressing the problem of biofilms in farm, wild, and companion animals lies in their pervasive impact on animal health and welfare. Biofilms, as resilient communities of microorganisms, pose a persistent challenge in causing infections and complicating treatment strategies. Recognizing and understanding the importance of mitigating biofilm formation is critical to ensuring the welfare of animals in a variety of settings, from farms to the wild and companion animals. Effectively addressing this issue not only improves the overall health of individual animals, but also contributes to the broader goals of sustainable agriculture, wildlife conservation, and responsible pet ownership. This review examines the current understanding of biofilm formation in animal diseases and elucidates the complex processes involved. Recognizing the limitations of traditional antibiotic treatments, mechanisms of resistance associated with biofilms are explored. The focus is on alternative therapeutic strategies to control biofilm, with illuminating case studies providing valuable context and practical insights. In conclusion, the review highlights the importance of exploring emerging approaches to mitigate biofilm formation in animals. It consolidates existing knowledge, highlights gaps in understanding, and encourages further research to address this critical facet of animal health. The comprehensive perspective provided by this review serves as a foundation for future investigations and interventions to improve the management of biofilm-associated infections in diverse animal populations.

Exploring the antimicrobial potential of isoniazid loaded Cu-based metal-organic frameworks as a novel strategy for effective killing of Mycobacterium tuberculosis

Tuberculosis (TB) remains one of the most infectious pathogens with the highest human mortality and morbidity. Biofilm formation during Mycobacterium tuberculosis (Mtb) infection is responsible for bacterial growth, communication, and, most essentially, increased resistance/tolerance to antibiotics leading to higher bacterial persistence. Thus, biofilm growth is presently considered a key virulence factor in the case of chronic disease. Metal-Organic Frameworks (MOFs) have recently emerged as a highly efficient system to improve existing antibiotics' therapeutic efficacy and reduce adverse effects. In this regard, we have synthesized Cu-MOF (IITI-3) using a solvothermal approach. IITI-3 was well characterized by various spectroscopic techniques. Herein, IITI-3 was first encapsulated with isoniazid (INH) to form INH@IITI-3 with 10 wt% loading within 1 hour. INH@IITI-3 was well characterized by PXRD, TGA, FTIR, and BET surface area analysis. Furthermore, the drug release kinetics studies of INH@IITI-3 have been performed at pH 5.8 and 7.4 to mimic the small intestine and blood pH, respectively. The results show that drug release follows first-order kinetics. Furthermore, the antimycobacterial activity of INH@IITI-3 demonstrated significant bacterial killing and altered the structural morphology of the bacteria. Moreover, INH@IITI-3 was able to inhibit the mycobacterial biofilm formation upon treatment and showed less cytotoxicity toward the murine RAW264.7 macrophages. Thus, this work significantly opens up new possibilities for the applications of INH@IITI-3 in biofilm infections in Mtb and further contributes to TB therapeutics.

Updated Review on the Mechanisms of Pathogenicity in Mycobacterium abscessus, a Rapidly Growing Emerging Pathogen

In recent years, Mycobacterium abscessus has appeared as an emerging pathogen, with an increasing number of disease cases reported worldwide that mainly occur among patients with chronic lung diseases or impaired immune systems. The treatment of this pathogen represents a challenge due to the multi-drug-resistant nature of this species and its ability to evade most therapeutic approaches. However, although predisposing host factors for disease are well known, intrinsic pathogenicity mechanisms of this mycobacterium are still not elucidated. Like other mycobacteria, intracellular invasiveness and survival inside different cell lines are pathogenic factors related to the ability of M. abscessus to establish infection. Some of the molecular factors involved in this process are well-known and are present in the mycobacterial cell wall, such as trehalose-dimycolate and glycopeptidolipids. The ability to form biofilms is another pathogenic factor that is essential for the development of chronic disease and for promoting mycobacterial survival against the host immune system or different antibacterial treatments. This capability also seems to be related to glycopeptidolipids and other lipid molecules, and some studies have shown an intrinsic relationship between both pathogenic mechanisms. Antimicrobial resistance is also considered a mechanism of pathogenicity because it allows the mycobacterium to resist antimicrobial therapies and represents an advantage in polymicrobial biofilms. The recent description of hyperpathogenic strains with the potential interhuman transmission makes it necessary to increase our knowledge of pathogenic mechanisms of this species to design better therapeutic approaches to the management of these infections.

Heme cross-feeding can augment Staphylococcus aureus and Enterococcus faecalis dual species biofilms

The contribution of biofilms to virulence and as a barrier to treatment is well-established for Staphylococcus aureus and Enterococcus faecalis, both nosocomial pathogens frequently isolated from biofilm-associated infections. Despite frequent co-isolation, their interactions in biofilms have not been well-characterized. We report that in combination, these two species can give rise to augmented biofilms biomass that is dependent on the activation of E. faecalis aerobic respiration. In E. faecalis, respiration requires both exogenous heme to activate the cydAB-encoded heme-dependent cytochrome bd, and the availability of O₂. We determined that the ABC transporter encoded by cydDC contributes to heme import. In dual species biofilms, S. aureus provides the heme to activate E. faecalis respiration. S. aureus mutants deficient in heme biosynthesis were unable to augment biofilms whereas heme alone is sufficient to augment E. faecalis mono-species biofilms. Our results demonstrate that S. aureus-derived heme, likely in the form of released hemoproteins, promotes E. faecalis biofilm formation, and that E. faecalis gelatinase activity facilitates heme extraction from hemoproteins. This interspecies interaction and metabolic cross-feeding may explain the frequent co-occurrence of these microbes in biofilm-associated infections.

Evolution of Antibacterial Drug Screening Methods: Current Prospects for Mycobacteria

The increasing resistance of infectious agents to available drugs urges the continuous and rapid development of new and more efficient treatment options. This process, in turn, requires accurate and high-throughput techniques for antimicrobials’ testing. Conventional methods of drug susceptibility testing (DST) are reliable and standardized by competent entities and have been thoroughly applied to a wide range of microorganisms. However, they require much manual work and time, especially in the case of slow-growing organisms, such as mycobacteria. Aiming at a better prediction of the clinical efficacy of new drugs, in vitro infection models have evolved to closely mimic the environment that microorganisms experience inside the host. Automated methods allow in vitro DST on a big scale, and they can integrate models that recreate the interactions that the bacteria establish with host cells in vivo. Nonetheless, they are expensive and require a high level of expertise, which makes them still not applicable to routine laboratory work. In this review, we discuss conventional DST methods and how they should be used as a first screen to select active compounds. We also highlight their limitations and how they can be overcome by more complex and sophisticated in vitro models that reflect the dynamics present in the host during infection. Special attention is given to mycobacteria, which are simultaneously difficult to treat and especially challenging to study in the context of DST.

Mycobacterium abscessus biofilms produce an extracellular matrix and have a distinct mycolic acid profile

A non-tuberculous mycobacterium, Mycobacterium abscessus is an emerging opportunistic pathogen associated with difficult to treat pulmonary infections, particularly in patients suffering from cystic fibrosis. It is capable of forming biofilms in vitro that result in an increase of already high levels of antibiotic resistance in this bacterium. Evidence that M. abscessus forms biofilm-like microcolonies in patient lungs and on medical devices further implicated the need to investigate this biofilm in detail. Therefore, in this study we characterized the M. abscessus pellicular biofilm, formed on a liquid-air interface, by studying its molecular composition, and its transcriptional profile in comparison to planktonic cells. Using scanning electron micrographs and fluorescence microscopy, we showed that M. abscessus biofilms produce an extracellular matrix composed of lipids, proteins, carbohydrates and extracellular DNA. Transcriptomic analysis of biofilms revealed an upregulation of pathways involved in the glyoxylate shunt, redox metabolism and mycolic acid biosynthesis. Genes involved in elongation and desaturation of mycolic acids were highly upregulated in biofilms and, mirroring those findings, biochemical analysis of mycolates revealed molecular changes and an increase in mycolic acid chain length. Together these results give us an insight into the complex structure of M. abscessus biofilms, the understanding of which may be adapted for clinical use in treatment of biofilm infections, including strategies for dispersing the extracellular matrix, allowing antibiotics to gain access to bacteria within the biofilm.

Mycobacterial biofilms as players in human infections: a review

The role of biofilms in pathogenicity and treatment strategies is often neglected in mycobacterial infections. In recent years, the emergence of nontuberculous mycobacterial infections has necessitated the development of novel prophylactic strategies and elucidation of the mechanisms underlying the establishment of chronic infections. More importantly, the question arises whether members of the Mycobacterium tuberculosis complex can form biofilms and contribute to latent tuberculosis and drug resistance because of the long-lasting and recalcitrant nature of its infections. This review discusses some of the molecular mechanisms by which biofilms could play a role in infection or pathological events in humans.

A Review of Methods to Determine Viability, Vitality, and Metabolic Rates in Microbiology

Viability and metabolic assays are commonly used as proxies to assess the overall metabolism of microorganisms. The variety of these assays combined with little information provided by some assay kits or online protocols often leads to mistakes or poor interpretation of the results. In addition, the use of some of these assays is restricted to simple systems (mostly pure cultures), and care must be taken in their application to environmental samples. In this review, the necessary data are compiled to understand the reactions or measurements performed in many of the assays commonly used in various aspects of microbiology. Also, their relationships to each other, as metabolism links many of these assays, resulting in correlations between measured values and parameters, are discussed. Finally, the limitations of these assays are discussed.

Overexpression of the celA1 gene in BCG modifies surface pellicle, glucosamine content in biofilms, and affects in vivo replication

Biofilm formed in vitro by mycobacteria has been associated with increased antibiotic tolerance as compared with planktonic cells. Cellulose has been identified as a component of DTT-exposed biofilms formed by M. tuberculosis. The celA1 gene of M. tuberculosis encodes a cellulase, which could affect the formation of biofilm by slow-growing mycobacteria. In this work, the celA1 gene of M. tuberculosis was cloned into the integrative pMV361 plasmid and then transformed into M. bovis BCG Pasteur to produce BCG:celA1, to have celA1 expressed from the strong promoter hsp60. We compared planktonic and biofilm growth, possible presence of CelA1 in whole protein extracts, quantitated biofilm, presence of monosaccharides, and bacillary burden in lungs after aerosol infection in BALB/c mice. Differences in the appearance of the surface pellicle and of the biofilm attached to the substrate were observed. In biofilms, we observed a significant decrease of glucosamine in BCG:celA1 compared with BCG:pMV361. Finally, BCG:celA1 had lower viable bacteria than the BCG:pMV361 strain after 24 h and 3 weeks post-infection, but no difference was found at 9 weeks post-infection.

Allyl piperidine-1-carbodiothioate and benzyl 1H-imidazole 1 carbodithioate: two potential agents to combat against mycobacteria

AIMS

The emergence of multidrug resistant strains of Mycobacterium tuberculosis has made tuberculosis more difficult to manage clinically. With the aim of obtaining new and effective anti-mycobacterial agent(s), this study investigated the anti-mycobacterial activity of several imidazole and piperidine derivatives.

METHODS AND RESULTS

Towards obtaining new anti-mycobacterial agents, Mycobacterium smegmatis cells were treated with different compounds for their growth inhibitory activity. Among these, benzyl 1H-imidazole-1-carbodithioate and allyl piperidine-1-carbodiothioate exhibited better inhibition than the others. Thereafter, anti-biofilm property of these two was examined by treating M. smegmatis with these agents before and after the formation of biofilm. The result showed that both the compounds at their sublethal dose inhibited the formation of biofilm as well as dispersed preformed biofilm. Consistently, they augmented the activity of isoniazid or rifampicin against biofilm-encapsulated cells. MTT assay was performed to examine the toxic effects of this combinatorial therapy on different cell lines. Results exhibited a low cytotoxicity for this combinatorial treatment. The activity of these two was also verified against dormant mycobacterial cells and was found to be effective.

CONCLUSION

The present study identified two compounds that exhibited anti-mycobacterial activities against both planktonic and dormant cells. These two also exhibited anti-biofilm activity at their sublethal dose and augmented the activity of isoniazid and rifampicin against biofilm encapsulated cells.

SIGNIFICANCE AND IMPACT OF THE STUDY

The current study provides two new agents that have the potential to be used in anti-mycobacterial therapy and may help in public health management.

Transcriptional portrait of M. bovis BCG during biofilm production shows genes differentially expressed during intercellular aggregation and substrate attachment

Mycobacterium tuberculosis and M. smegmatis form drug-tolerant biofilms through dedicated genetic programs. In support of a stepwise process regulating biofilm production in mycobacteria, it was shown elsewhere that lsr2 participates in intercellular aggregation, while groEL1 was required for biofilm maturation in M. smegmatis. Here, by means of RNA-Seq, we monitored the early steps of biofilm production in M. bovis BCG, to distinguish intercellular aggregation from attachment to a surface. Genes encoding for the transcriptional regulators dosR and BCG0114 (Rv0081) were significantly regulated and responded differently to intercellular aggregation and surface attachment. Moreover, a M. tuberculosis H37Rv deletion mutant in the Rv3134c-dosS-dosR regulon, formed less biofilm than wild type M. tuberculosis, a phenotype reverted upon reintroduction of this operon into the mutant. Combining RT-qPCR with microbiological assays (colony and surface pellicle morphologies, biofilm quantification, Ziehl–Neelsen staining, growth curve and replication of planktonic cells), we found that BCG0642c affected biofilm production and replication of planktonic BCG, whereas ethR affected only phenotypes linked to planktonic cells despite its downregulation at the intercellular aggregation step. Our results provide evidence for a stage-dependent expression of genes that contribute to biofilm production in slow-growing mycobacteria.

Isothermal Microcalorimetry of Tumor Cells: Enhanced Thermogenesis by Metastatic Cells

Tumor cells exhibit rewired metabolism. We carried out comparative analyses attempting to investigate whether metabolic reprograming could be measured by isothermal microcalorimetry. Intact metastatic cell lines of tongue cell carcinoma, human and murine melanoma, lung, and breast tumors consistently released more heat than non-metastatic cells or cells displaying lower metastatic potential. In tongue squamous carcinoma cells mitochondrial enriched extract reproduced the heat release pattern of intact cells. Cytochalasin D, an actin filament inhibitor, and suppression of metastasis marker Melanoma associated gene 10 (MAGEA10) decreased heat release. Uncoupling protein 2 was highly expressed in metastatic cells, but not in non-metastatic cells. Carnitine palmitoyl transferase-1 inhibitor, Etomoxir strongly inhibited heat release by metastatic cells, thus linking lipid metabolism to thermogenesis. We propose that heat release may be a quantifiable trait of the metastatic process.

Comparison of isothermal microcalorimetry and BACTEC MGIT960 for the detection of the metabolic activity of Mycobacterium tuberculosis in sputum samples

INTRODUCTION

This study explores the uses of microcalorimetry to detect Mycobacterium tuberculosis (TB) in sputum. Microcalorimetry measures metabolic heat evolution during cellular proliferation of tuberculosis (TB) and is considered as a possible alternative to conventional diagnostic tools.

OBJECTIVES

To compare the time to detection (TTD) from the BACTEC™ MGIT™ 960 and the calScreener™ calorimetric system.

METHODS

Sixty-four sputa samples were selected from patients with confirmed pulmonary tuberculosis. Those sample were then decontaminated and analysed using calorimetry and BACTEC MGIT 960 system.

RESULTS

The incubation period until detection of M. tuberculosis in the sample was 8·5 ± 3·7 days for the MGIT system and 10·1 ± 4·1 days (mean ± SD) for calorimetry.

CONCLUSIONS

The microincubations in the 48-well format calScreener offers potential for rapid and accurate diagnostic of TB in different samples. Although TTD from calorimetry is still longer than with the MGIT, our findings suggest that several improvements are possible. Still, the instrument is ideal for continuous, real-time analysis of net metabolic heat release of limited sample numbers.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our result emphasizes that with further optimization, calorimetry can become an alternative detection method for tuberculosis.

Rapid Calorimetric Detection of Bacterial Contamination: Influence of the Cultivation Technique

Modern isothermal microcalorimeters (IMC) are able to detect the metabolic heat of bacteria with an accuracy sufficient to recognize even the smallest traces of bacterial contamination of water, food, and medical samples. The modern IMC techniques are often superior to conventional detection methods in terms of the detection time, reliability, labor, and technical effort. What is missing is a systematic analysis of the influence of the cultivation conditions on calorimetric detection. For the acceptance of IMC techniques, it is advantageous if already standardized cultivation techniques can be combined with calorimetry. Here we performed such a systematic analysis using Lactobacillus plantarum as a model bacterium. Independent of the cultivation techniques, IMC detections were much faster for high bacterial concentrations (>102 CFU⋅mL-1) than visual detections. At low bacterial concentrations (<102 CFU⋅mL-1), detection times were approximately the same. Our data demonstrate that all kinds of traditional cultivation techniques like growth on agar (GOA) or in agar (GIA), in liquid media (GL) or on agar after enrichment via membrane filtration (GF) can be combined with IMC. The order of the detection times was GF < GIA ≈ GL ≈ GOA. The observed linear relationship between the calorimetric detection times and the initial bacterial concentrations can be used to quantify the bacterial contamination. Further investigations regarding the correlation between the filling level (in mm) of the calorimetric vessel and the specific maximum heat flow (in μW⋅g-1) illustrated two completely different results for liquid and solid media. Due to the better availability of substrates and the homogeneous distribution of bacteria growing in a liquid medium, the volume-related maximum heat flow was independent on the filling level of the calorimetric vessels. However, in a solid medium, the volume-related maximum heat flow approached a threshold and achieved a maximum at low filling levels. This fundamentally different behavior can be explained by the spatial limitation of the growth of bacterial colonies and the reduced substrate supply due to diffusion.

Testing Anti-Biofilm Polymeric Surfaces: Where to Start?

Present day awareness of biofilm colonization on polymeric surfaces has prompted the scientific community to develop an ever-increasing number of new materials with anti-biofilm features. However, compared to the large amount of work put into discovering potent biofilm inhibitors, only a small number of papers deal with their validation, a critical step in the translation of research into practical applications. This is due to the lack of standardized testing methods and/or of well-controlled in vivo studies that show biofilm prevention on polymeric surfaces; furthermore, there has been little correlation with the reduced incidence of material deterioration. Here an overview of the most common methods for studying biofilms and for testing the anti-biofilm properties of new surfaces is provided.

Size-dependent antimycobacterial activity of titanium oxide nanoparticles against Mycobacterium tuberculosis

The titanium oxide nanoparticles showed excellent antibiofilm activity against Mycobacterium tuberculosis by inhibiting the colony formation and damage the cell wall leads to immature biofilm formation as well as inhibition of metabolic activity.

Mupirocin at Subinhibitory Concentrations Induces Biofilm Formation in Staphylococcus aureus

OBJECTIVES

Mupirocin is a useful antibiotic against superficial skin infections. We compared the impact of mupirocin with a cephalosporin, a fluoroquinolone, an aminoglycoside, and a macrolide on planktonic cell growth and biofilm formation of methicillin-susceptible Staphylococcus aureus (MSSA) and methicillin-resistant S. aureus (MRSA).

MATERIALS AND METHODS

Minimum inhibitory concentration (MIC) of mupirocin was determined against S. aureus strains used in this study. Biofilm formation of S. aureus strains exposed to mupirocin was quantified by crystal violet staining assay. Moreover, biofilm structure and viability of the biofilm cells were visualized by Live/Dead staining assay. Biofilm-related gene expression was investigated by quantitative real-time PCR.

RESULTS

MRSA USA300 clone was resistant to mupirocin with MIC of 1,024 mg/L, while MRSA ATCC-43300 and MSSA ATCC-29213 were susceptible with MICs of 0.03 mg/L. Planktonic cell growth of the S. aureus strains was inhibited by mupirocin in a dose-dependent manner. However, some of the low concentrations of mupirocin less than the MICs promoted biofilm formation. Confocal laser scanning microscopy of the biofilm structures and cell viabilities showed established biofilms of slightly higher cell density in the mupirocin treated groups, especially in the MRSA USA300 clone. Gene expression of RNAIII in planktonic cells and biofilms of MRSA USA300 clone showed the highest upregulation after initial exposure to sub-MIC of mupirocin followed by downregulation, whereas the other antibiotics showed various fluctuations.

CONCLUSION

The results showed that subinhibitory concentrations of mupirocin promoted biofilm formation of S. aureus, in particular the MRSA USA300 clone.

Viability, biofilm formation, and MazEF expression in drug-sensitive and drug-resistant Mycobacterium tuberculosis strains circulating in Xinjiang, China

Background

Tuberculosis (TB) caused by Mycobacterium tuberculosis (MTB) is one of the most common chronic infectious amphixenotic diseases worldwide. Prevention and control of TB are greatly difficult, due to the increase in drug-resistant TB, particularly multidrug-resistant TB. We speculated that there were some differences between drug-sensitive and drug-resistant MTB strains and that mazEF3,6,9 toxin–antitoxin systems (TASs) were involved in MTB viability. This study aimed to investigate differences in viability, biofilm formation, and MazEF expression between drug-sensitive and drug-resistant MTB strains circulating in Xinjiang, China, and whether mazEF3,6,9 TASs contribute to MTB viability under stress conditions.

Materials and methods

Growth profiles and biofilm-formation abilities of drug-sensitive, drug-resistant MTB strains and the control strain H37Rv were monitored. Using molecular biology experiments, the mRNA expression of the mazF3, 6, and 9 toxin genes, the mazE3, 6, and 9 antitoxin genes, and expression of the MazF9 protein were detected in the different MTB strains, H37RvΔmazEF3,6,9 mutants from the H37Rv parent strain were generated, and mutant viability was tested.

Results

Ex vivo culture analyses demonstrated that drug-resistant MTB strains exhibit higher survival rates than drug-sensitive strains and the control strain H37Rv. However, there was no statistical difference in biofilm-formation ability in the drug-sensitive, drug-resistant, and H37Rv strains. mazE3,6 mRNA-expression levels were relatively reduced in the drug-sensitive and drug-resistant strains compared to H37Rv. Conversely, mazE3,9 expression was increased in drug-sensitive strains compared to drug-resistant strains. Furthermore, compared with the H37Rv strain, mazF3,6 expression was increased in drug-resistant strains, mazF9 expression was increased in drug-sensitive strains, and mazF9 exhibited reduced expression in drug-resistant strains compared with drug-sensitive strains. Protein expression of mazF9 was increased in drug-sensitive and drug-resistant strains compared to H37Rv, while drug-resistant strains exhibited reduced mazF9 expression compared to drug-sensitive strains. Compared to H37Rv, H37RvΔmazEF3,6,9-deletion mutants grew more slowly under both stress conditions, and their ability to survive in host macrophages was also weaker. Furthermore, the host macrophage-apoptosis rate was higher after infection with any of the H37RvΔmazEF3,6,9 mutants than with the H37Rv strain.

Conclusion

The increased viability of MTB drug-resistant strains compared with drug-sensitive strains is likely to be related to differential MazEF mRNA and protein expression. mazEF3,6,9 TASs contribute to MTB viability under stress conditions.