1
|
Xu Z, Chen Y, Cao Y, Xue B. Tough Hydrogels with Different Toughening Mechanisms and Applications. Int J Mol Sci 2024; 25:2675. [PMID: 38473922 DOI: 10.3390/ijms25052675] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2024] [Revised: 02/20/2024] [Accepted: 02/24/2024] [Indexed: 03/14/2024] Open
Abstract
Load-bearing biological tissues, such as cartilage and muscles, exhibit several crucial properties, including high elasticity, strength, and recoverability. These characteristics enable these tissues to endure significant mechanical stresses and swiftly recover after deformation, contributing to their exceptional durability and functionality. In contrast, while hydrogels are highly biocompatible and hold promise as synthetic biomaterials, their inherent network structure often limits their ability to simultaneously possess a diverse range of superior mechanical properties. As a result, the applications of hydrogels are significantly constrained. This article delves into the design mechanisms and mechanical properties of various tough hydrogels and investigates their applications in tissue engineering, flexible electronics, and other fields. The objective is to provide insights into the fabrication and application of hydrogels with combined high strength, stretchability, toughness, and fast recovery as well as their future development directions and challenges.
Collapse
Affiliation(s)
- Zhengyu Xu
- Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructure, Department of Physics, Nanjing University, Nanjing 210093, China
| | - Yanru Chen
- Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructure, Department of Physics, Nanjing University, Nanjing 210093, China
| | - Yi Cao
- Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructure, Department of Physics, Nanjing University, Nanjing 210093, China
- Jinan Microecological Biomedicine Shandong Laboratory, Jinan 250000, China
| | - Bin Xue
- Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructure, Department of Physics, Nanjing University, Nanjing 210093, China
- Jinan Microecological Biomedicine Shandong Laboratory, Jinan 250000, China
| |
Collapse
|
2
|
Naik K, Singh P, Yadav M, Srivastava SK, Tripathi S, Ranjan R, Dhar P, Verma AK, Chaudhary S, Parmar AS. 3D printable, injectable amyloid-based composite hydrogel of bovine serum albumin and aloe vera for rapid diabetic wound healing. J Mater Chem B 2023; 11:8142-8158. [PMID: 37431285 DOI: 10.1039/d3tb01151h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/12/2023]
Abstract
Protein-based biomaterials, particularly amyloids, have sparked considerable scientific interest in recent years due to their exceptional mechanical strength, excellent biocompatibility and bioactivity. In this work, we have synthesized a novel amyloid-based composite hydrogel consisting of bovine serum albumin (BSA) and aloe vera (AV) gel to utilize the medicinal properties of the AV gel and circumvent its mechanical frangibility. The synthesized composite hydrogel demonstrated an excellent porous structure, self-fluorescence, non-toxicity, and controlled rheological properties. Moreover, this hydrogel possesses inherent antioxidant and antibacterial properties, which accelerate the rapid healing of wounds. The in vitro wound healing capabilities of the synthesized composite hydrogel were evaluated using 3T3 fibroblast cells. Moreover, the efficacy of the hydrogel in accelerating chronic wound healing via collagen crosslinking was investigated through in vivo experiments using a diabetic mouse skin model. The findings indicate that the composite hydrogel, when applied, promotes wound healing by inducing collagen deposition and upregulating the expression of vascular endothelial growth factor (VEGF) and its receptors. We also demonstrate the feasibility of the 3D printing of the BSA-AV hydrogel, which can be tailored to treat various types of wound. The 3D printed hydrogel exhibits excellent shape fidelity and mechanical properties that can be utilized for personalized treatment and rapid chronic wound healing. Taken together, the BSA-AV hydrogel has great potential as a bio-ink in tissue engineering as a dermal substitute for customizable skin regeneration.
Collapse
Affiliation(s)
- Kaustubh Naik
- Biophysics and Nanotechnology Laboratory, Department of Physics, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India.
| | - Priyanka Singh
- Nanobiotech Lab, Kirorimal College, University of Delhi, 110007, Delhi, India.
| | - Monika Yadav
- Nanobiotech Lab, Kirorimal College, University of Delhi, 110007, Delhi, India.
| | - Saurabh Kr Srivastava
- Biophysics and Nanotechnology Laboratory, Department of Physics, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India.
| | - Shikha Tripathi
- Biophysics and Nanotechnology Laboratory, Department of Physics, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India.
| | - Rahul Ranjan
- School of Biochemical Engineering, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India
| | - Prodyut Dhar
- School of Biochemical Engineering, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India
| | - Anita Kamra Verma
- Nanobiotech Lab, Kirorimal College, University of Delhi, 110007, Delhi, India.
| | - Shilpi Chaudhary
- Department of Applied Sciences, Punjab Engineering College (Deemed to be University), Chandigarh, 160012, India.
| | - Avanish Singh Parmar
- Biophysics and Nanotechnology Laboratory, Department of Physics, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India.
- Centre for Biomaterials and Tissue Engineering, Indian Institute of Technology (BHU), Varanasi, India
| |
Collapse
|
3
|
Ahmed T. Biomaterial-based in vitro 3D modeling of glioblastoma multiforme. CANCER PATHOGENESIS AND THERAPY 2023; 1:177-194. [PMID: 38327839 PMCID: PMC10846340 DOI: 10.1016/j.cpt.2023.01.002] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/02/2022] [Revised: 12/24/2022] [Accepted: 01/04/2023] [Indexed: 02/09/2024]
Abstract
Adult-onset brain cancers, such as glioblastomas, are particularly lethal. People with glioblastoma multiforme (GBM) do not anticipate living for more than 15 months if there is no cure. The results of conventional treatments over the past 20 years have been underwhelming. Tumor aggressiveness, location, and lack of systemic therapies that can penetrate the blood-brain barrier are all contributing factors. For GBM treatments that appear promising in preclinical studies, there is a considerable rate of failure in phase I and II clinical trials. Unfortunately, access becomes impossible due to the intricate architecture of tumors. In vitro, bioengineered cancer models are currently being used by researchers to study disease development, test novel therapies, and advance specialized medications. Many different techniques for creating in vitro systems have arisen over the past few decades due to developments in cellular and tissue engineering. Later-stage research may yield better results if in vitro models that resemble brain tissue and the blood-brain barrier are used. With the use of 3D preclinical models made available by biomaterials, researchers have discovered that it is possible to overcome these limitations. Innovative in vitro models for the treatment of GBM are possible using biomaterials and novel drug carriers. This review discusses the benefits and drawbacks of 3D in vitro glioblastoma modeling systems.
Collapse
Affiliation(s)
- Tanvir Ahmed
- Department of Pharmaceutical Sciences, North South University, Bashundhara, Dhaka, 1229, Bangladesh
| |
Collapse
|
4
|
Sokolov P, Samokhvalov P, Sukhanova A, Nabiev I. Biosensors Based on Inorganic Composite Fluorescent Hydrogels. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:nano13111748. [PMID: 37299650 DOI: 10.3390/nano13111748] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2023] [Revised: 05/23/2023] [Accepted: 05/25/2023] [Indexed: 06/12/2023]
Abstract
Fluorescent hydrogels are promising candidate materials for portable biosensors to be used in point-of-care diagnosis because (1) they have a greater capacity for binding organic molecules than immunochromatographic test systems, determined by the immobilization of affinity labels within the three-dimensional hydrogel structure; (2) fluorescent detection is more sensitive than the colorimetric detection of gold nanoparticles or stained latex microparticles; (3) the properties of the gel matrix can be finely tuned for better compatibility and detection of different analytes; and (4) hydrogel biosensors can be made to be reusable and suitable for studying dynamic processes in real time. Water-soluble fluorescent nanocrystals are widely used for in vitro and in vivo biological imaging due to their unique optical properties, and hydrogels based on these allow the preservation of these properties in bulk composite macrostructures. Here we review the techniques for obtaining analyte-sensitive fluorescent hydrogels based on nanocrystals, the main methods used for detecting the fluorescent signal changes, and the approaches to the formation of inorganic fluorescent hydrogels via sol-gel phase transition using surface ligands of the nanocrystals.
Collapse
Affiliation(s)
- Pavel Sokolov
- Life Improvement by Future Technologies (LIFT) Center, Skolkovo, 143025 Moscow, Russia
- Laboratory of Nano-Bioengineering, National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), 115522 Moscow, Russia
| | - Pavel Samokhvalov
- Life Improvement by Future Technologies (LIFT) Center, Skolkovo, 143025 Moscow, Russia
- Laboratory of Nano-Bioengineering, National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), 115522 Moscow, Russia
| | - Alyona Sukhanova
- Laboratoire de Recherche en Nanosciences, LRN-EA4682, Université de Reims Champagne-Ardenne, 51100 Reims, France
| | - Igor Nabiev
- Life Improvement by Future Technologies (LIFT) Center, Skolkovo, 143025 Moscow, Russia
- Laboratory of Nano-Bioengineering, National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), 115522 Moscow, Russia
- Laboratoire de Recherche en Nanosciences, LRN-EA4682, Université de Reims Champagne-Ardenne, 51100 Reims, France
| |
Collapse
|
5
|
Bassan GA, Marchesan S. Peptide-Based Materials That Exploit Metal Coordination. Int J Mol Sci 2022; 24:ijms24010456. [PMID: 36613898 PMCID: PMC9820281 DOI: 10.3390/ijms24010456] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2022] [Revised: 12/12/2022] [Accepted: 12/22/2022] [Indexed: 12/29/2022] Open
Abstract
Metal-ion coordination has been widely exploited to control the supramolecular behavior of a variety of building blocks into functional materials. In particular, peptides offer great chemical diversity for metal-binding modes, combined with inherent biocompatibility and biodegradability that make them attractive especially for medicine, sensing, and environmental remediation. The focus of this review is the last 5 years' progress in this exciting field to conclude with an overview of the future directions that this research area is currently undertaking.
Collapse
|
6
|
Drew EN, Piras CC, Fitremann J, Smith DK. Wet-spinning multi-component low-molecular-weight gelators to print synergistic soft materials. Chem Commun (Camb) 2022; 58:11115-11118. [PMID: 36102842 DOI: 10.1039/d2cc04003d] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Two different low-molecular-weight gelators (LMWGs) have been 3D-printed as filaments by wet-spininng. When the two LMWGs are simultaneously wet-spun, the co-assembled hybrid gel filaments combine the individual properties of the two gelators (dynamic pH response and in-situ metal nanoparticle formation) in synergistic ways, creating gel objects with new properties.
Collapse
Affiliation(s)
- Emma N Drew
- Department of Chemistry, University of York, Heslington, York, YO10 5DD, UK.
| | - Carmen C Piras
- Department of Chemistry, University of York, Heslington, York, YO10 5DD, UK.
| | - Juliette Fitremann
- IMRCP, UMR 5623, CNRS, Université de Toulouse, 118 route de Narbonne, F-31062 Toulouse, France
| | - David K Smith
- Department of Chemistry, University of York, Heslington, York, YO10 5DD, UK.
| |
Collapse
|
7
|
Lee YJ, Lee JS, Ajiteru O, Lee OJ, Lee JS, Lee H, Kim SW, Park JW, Kim KY, Choi KY, Hong H, Sultan T, Kim SH, Park CH. Biocompatible fluorescent silk fibroin bioink for digital light processing 3D printing. Int J Biol Macromol 2022; 213:317-327. [PMID: 35605719 DOI: 10.1016/j.ijbiomac.2022.05.123] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2022] [Revised: 05/15/2022] [Accepted: 05/17/2022] [Indexed: 11/28/2022]
Abstract
Chemically modified silk fibroin (SF) bioink has been used for three-dimensional (3D) bioprinting in tissue engineering because of its biocompatibility and printability. Also, fluorescent silk fibroin (FSF) from transgenic silkworms has been recently applied in biomedicine because of its fluorescence property. However, the fabrication of fluorescent hydrogel from FSF has not been elucidated. In this study, we showed the fabrication of a digital light processing (DLP) printable bioink from a chemically modified FSF. This bioink was fabricated by covalent conjugation of FSF and glycidyl methacrylate (GMA) and can be printed into various structures, such as the brain, ear, hand, lung, and internal organs. The physical properties of glycidyl methacrylated fluorescent silk fibroin (FSGMA) hydrogel was like the glycidyl methacrylated non-fluorescent silk fibroin (SGMA) hydrogel. The FSGMA hydrogel significantly retains its fluorescence property and has excellent biocompatibility. All these properties make FSGMA hydrogel a potent tool in encapsulated cell tracking and observing the scaffolds' degradation in vivo. This study suggested that our 3D DLP printable FSF bioink could play a promising role in the biomedical field.
Collapse
Affiliation(s)
- Young Jin Lee
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Joong Seob Lee
- Department of Otorhinolaryngology-Head and Neck Surgery, Hallym University Sacred Heart Hospital, Anyang 14068, Republic of Korea
| | - Olatunji Ajiteru
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Ok Joo Lee
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Ji Seung Lee
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Hanna Lee
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Seong Wan Kim
- Department of Agricultural Biology, National Institute of Agricultural Sciences, Rural Development Administration, Wanju, Jeollabuk-do 55365, Republic of Korea
| | - Jong Woo Park
- Department of Agricultural Biology, National Institute of Agricultural Sciences, Rural Development Administration, Wanju, Jeollabuk-do 55365, Republic of Korea
| | - Kee Young Kim
- Department of Agricultural Biology, National Institute of Agricultural Sciences, Rural Development Administration, Wanju, Jeollabuk-do 55365, Republic of Korea
| | - Kyu Young Choi
- Depratment of Otorhinolaryngology-Head and Neck Surgery, Kangnam Sacred Heart Hospital, Seoul 07441, Republic of Korea
| | - Heesun Hong
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Tipu Sultan
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Soon Hee Kim
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea
| | - Chan Hum Park
- Nano-Bio Regenerative Medical Institute (NBRM), Hallym University, Chuncheon 24252, Republic of Korea; Depratment of Otorhinolaryngology-Head and Neck Surgery, Chuncheon Sacred Heart Hospital, Chuncheon 24253, Republic of Korea.
| |
Collapse
|
8
|
3D printing of biocompatible low molecular weight gels: Imbricated structures with sacrificial and persistent N-alkyl-d-galactonamides. J Colloid Interface Sci 2022; 617:156-170. [PMID: 35276518 DOI: 10.1016/j.jcis.2022.02.076] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2021] [Revised: 02/17/2022] [Accepted: 02/18/2022] [Indexed: 12/25/2022]
Abstract
HYPOTHESIS We have shown earlier that low molecular weight gels based on N-heptyl-d-galactonamide hydrogels can be 3D printed by solvent exchange, but they tend to dissolve in the printing bath. We wanted to explore the printing of less soluble N-alkyl-d-galactonamides with longer alkyl chains. Less soluble hydrogels could be good candidates as cell culture scaffolds. EXPERIMENTS N-hexyl, N-octyl and N-nonyl-d-galactonamide solutions in dimethylsulfoxide are injected in a bath of water following patterns driven by a 2D drawing robot coupled to a z-platform. Solubilization of the gels with time has been determined and solubility of the gelators has been measured by NMR. Imbricated structures have been built with N-nonyl-d-galactonamide as a persistent ink and N-hexyl or N-heptyl-d-galactonamide as sacrificial inks. Human mesenchymal stem cells have been cultured on N-nonyl-d-galactonamide hydrogels prepared by cooling or by 3D printing. FINDINGS The conditions for printing well-resolved 3D patterns have been determined for the three gelators. In imbricated structures, the solubilization of N-hexyl or N-heptyl-d-galactonamide occurred after a few hours or days and gave channels. Human mesenchymal stem cells grown on N-nonyl-d-galactonamide hydrogels prepared by heating-cooling, which are stable and have a fibrillar microstructure, developed properly. 3D printed hydrogels, which microstructure is made of micrometric flakes, appeared too fragile to withstand cell growth.
Collapse
|
9
|
Tavakoli J, Shrestha J, Bazaz SR, Rad MA, Warkiani ME, Raston CL, Tipper JL, Tang Y. Developing Novel Fabrication and Optimisation Strategies on Aggregation-Induced Emission Nanoprobe/Polyvinyl Alcohol Hydrogels for Bio-Applications. Molecules 2022; 27:molecules27031002. [PMID: 35164268 PMCID: PMC8840180 DOI: 10.3390/molecules27031002] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2022] [Revised: 01/29/2022] [Accepted: 01/31/2022] [Indexed: 11/16/2022] Open
Abstract
The current study describes a new technology, effective for readily preparing a fluorescent (FL) nanoprobe-based on hyperbranched polymer (HB) and aggregation-induced emission (AIE) fluorogen with high brightness to ultimately develop FL hydrogels. We prepared the AIE nanoprobe using a microfluidic platform to mix hyperbranched polymers (HB, generations 2, 3, and 4) with AIE (TPE-2BA) under shear stress and different rotation speeds (0-5 K RPM) and explored the FL properties of the AIE nanoprobe. Our results reveal that the use of HB generation 4 exhibits 30-times higher FL intensity compared to the AIE alone and is significantly brighter and more stable compared to those that are prepared using HB generations 3 and 2. In contrast to traditional methods, which are expensive and time-consuming and involve polymerization and post-functionalization to develop FL hyperbranched molecules, our proposed method offers a one-step method to prepare an AIE-HB nanoprobe with excellent FL characteristics. We employed the nanoprobe to fabricate fluorescent injectable bioadhesive gel and a hydrogel microchip based on polyvinyl alcohol (PVA). The addition of borax (50 mM) to the PVA + AIE nanoprobe results in the development of an injectable bioadhesive fluorescent gel with the ability to control AIEgen release for 300 min. When borax concentration increases two times (100 mM), the adhesion stress is more than two times bigger (7.1 mN/mm2) compared to that of gel alone (3.4 mN/mm2). Excellent dimensional stability and cell viability of the fluorescent microchip, along with its enhanced mechanical properties, proposes its potential applications in mechanobiology and understanding the impact of microstructure in cell studies.
Collapse
Affiliation(s)
- Javad Tavakoli
- Centre for Health Technologies, School of Biomedical Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, NSW 2007, Australia; (J.T.); (J.S.); (S.R.B.); (M.A.R.); (M.E.W.)
| | - Jesus Shrestha
- Centre for Health Technologies, School of Biomedical Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, NSW 2007, Australia; (J.T.); (J.S.); (S.R.B.); (M.A.R.); (M.E.W.)
| | - Sajad R. Bazaz
- Centre for Health Technologies, School of Biomedical Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, NSW 2007, Australia; (J.T.); (J.S.); (S.R.B.); (M.A.R.); (M.E.W.)
| | - Maryam A. Rad
- Centre for Health Technologies, School of Biomedical Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, NSW 2007, Australia; (J.T.); (J.S.); (S.R.B.); (M.A.R.); (M.E.W.)
| | - Majid E. Warkiani
- Centre for Health Technologies, School of Biomedical Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, NSW 2007, Australia; (J.T.); (J.S.); (S.R.B.); (M.A.R.); (M.E.W.)
| | - Colin L. Raston
- Institute for NanoScale Science and Technology, College of Science and Engineering, Flinders University, Adelaide, SA 5042, Australia;
| | - Joanne L. Tipper
- Centre for Health Technologies, School of Biomedical Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Sydney, NSW 2007, Australia; (J.T.); (J.S.); (S.R.B.); (M.A.R.); (M.E.W.)
- Correspondence: (J.L.T.); (Y.T.)
| | - Youhong Tang
- Institute for NanoScale Science and Technology, College of Science and Engineering, Flinders University, Adelaide, SA 5042, Australia;
- Medical Device Research Institute, College of Science and Engineering, Flinders University, Adelaide, SA 5042, Australia
- Correspondence: (J.L.T.); (Y.T.)
| |
Collapse
|
10
|
Biswakarma D, Dey N, Bhattacharya S. A biocompatible hydrogel as a template for oxidative decomposition reactions: a chemodosimetric analysis and in vitro imaging of hypochlorite. Chem Sci 2022; 13:2286-2295. [PMID: 35310481 PMCID: PMC8864679 DOI: 10.1039/d1sc05424d] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/02/2021] [Accepted: 01/06/2022] [Indexed: 11/21/2022] Open
Abstract
The self-assembly properties of new biocompatible, thermoreversible fluorescent hydrogels, composed of amino acid residues have been reported. A unique gel-to-sol transition is triggered by chemodosimetric interaction in the presence of hypochlorite.
Collapse
Affiliation(s)
- Dipen Biswakarma
- Department of Organic Chemistry, Indian Institute of Science, Bangalore, Karnataka 560012, India
- Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru 560064, Karnataka, India
| | - Nilanjan Dey
- Department of Chemistry, BITS Pilani, Hyderabad Campus, Jawahar Nagar, Shameerpet Mandal, Hyderabad-500078, India
| | - Santanu Bhattacharya
- Department of Organic Chemistry, Indian Institute of Science, Bangalore, Karnataka 560012, India
- School of Applied & Interdisciplinary Sciences, Indian Association for the Cultivation of Science, Kolkata 700032, India
- Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur, Bengaluru 560064, Karnataka, India
| |
Collapse
|
11
|
Milasheuskaya Y, Schwarz J, Dostál L, Růžičková Z, Bouška M, Olmrová Zmrhalová Z, Syrový T, Jambor R. Synthesis and optical properties of N→Ga coordinated gallium boroxines. Dalton Trans 2021; 50:18164-18172. [PMID: 34859799 DOI: 10.1039/d1dt02975d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Reactions of the N,C,N-chelated organogallium amide LGa(NEt2)2 (1), where L is {2,6-(Me2NCH2)2C6H3}-, with organoboronic acids RB(OH)2 yielded molecular gallium boroxines LGa(O3B2R2) (2: R = OH, 3: R = Ph, 4: R = 4-MeO-C6H4, 5: R = 4-CHO-C6H4, 6: R = Fc), neutral analogues of gallaborates. The molecular structures revealed the presence of a six-membered central GaB2O3 ring. The film forming properties of 5 allowed the deposition of transparent thin films by a spin coating method. The thicknesses, refractive index, energy of the optical gap (Eoptg), activation energy of surface electrical conductivity (Esa) and pre-exponential factor (σ0) of the thin layers of 5 were measured and they are close to those found for related oxygen glass. Finally, GBO 5 was also used as an additive to printing ink and a thin film of 5 was prepared by the gravure printing technique.
Collapse
Affiliation(s)
- Yaraslava Milasheuskaya
- Department of General and Inorganic Chemistry, University of Pardubice, 532 10 Pardubice, Czech Republic.
| | - Jiří Schwarz
- Department of General and Inorganic Chemistry, University of Pardubice, 532 10 Pardubice, Czech Republic.
| | - Libor Dostál
- Department of General and Inorganic Chemistry, University of Pardubice, 532 10 Pardubice, Czech Republic.
| | - Zdenka Růžičková
- Department of General and Inorganic Chemistry, University of Pardubice, 532 10 Pardubice, Czech Republic.
| | - Marek Bouška
- Department of Graphic Arts and Photophysics, Faculty of Chemical Technology, University of Pardubice, 532 10 Pardubice, Czech Republic
| | - Zuzana Olmrová Zmrhalová
- Center of Materials and Nanotechnologies, Faculty of Chemical Technology, University of Pardubice, 532 10 Pardubice, Czech Republic
| | - Tomáš Syrový
- Department of Graphic Arts and Photophysics, Faculty of Chemical Technology, University of Pardubice, 532 10 Pardubice, Czech Republic
| | - Roman Jambor
- Department of General and Inorganic Chemistry, University of Pardubice, 532 10 Pardubice, Czech Republic.
| |
Collapse
|
12
|
Sethi S, Medha, Singh G, Sharma R, Kaith BS, Sharma N, Khullar S. Fluorescent hydrogel of chitosan and gelatin cross‐linked with maleic acid for optical detection of heavy metals. J Appl Polym Sci 2021. [DOI: 10.1002/app.51941] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Affiliation(s)
- Sapna Sethi
- Department of Chemistry DAV University Jalandhar Jalandhar Punjab India
| | - Medha
- Department of Chemistry DAV University Jalandhar Jalandhar Punjab India
| | | | - Rashmi Sharma
- Department of Chemistry DAV University Jalandhar Jalandhar Punjab India
| | - Balbir Singh Kaith
- Department of Chemistry Dr. B. R. Ambedkar National Institute of Technology Jalandhar Jalandhar Punjab India
| | - Neeraj Sharma
- Department of Chemistry DAV University Jalandhar Jalandhar Punjab India
| | - Sadhika Khullar
- Department of Chemistry Dr. B. R. Ambedkar National Institute of Technology Jalandhar Jalandhar Punjab India
| |
Collapse
|
13
|
Zaszczyńska A, Moczulska-Heljak M, Gradys A, Sajkiewicz P. Advances in 3D Printing for Tissue Engineering. MATERIALS (BASEL, SWITZERLAND) 2021; 14:3149. [PMID: 34201163 PMCID: PMC8226963 DOI: 10.3390/ma14123149] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/15/2021] [Revised: 06/01/2021] [Accepted: 06/04/2021] [Indexed: 12/18/2022]
Abstract
Tissue engineering (TE) scaffolds have enormous significance for the possibility of regeneration of complex tissue structures or even whole organs. Three-dimensional (3D) printing techniques allow fabricating TE scaffolds, having an extremely complex structure, in a repeatable and precise manner. Moreover, they enable the easy application of computer-assisted methods to TE scaffold design. The latest additive manufacturing techniques open up opportunities not otherwise available. This study aimed to summarize the state-of-art field of 3D printing techniques in applications for tissue engineering with a focus on the latest advancements. The following topics are discussed: systematics of the available 3D printing techniques applied for TE scaffold fabrication; overview of 3D printable biomaterials and advancements in 3D-printing-assisted tissue engineering.
Collapse
Affiliation(s)
- Angelika Zaszczyńska
- Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5b St., 02-106 Warsaw, Poland
| | - Maryla Moczulska-Heljak
- Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5b St., 02-106 Warsaw, Poland
| | - Arkadiusz Gradys
- Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5b St., 02-106 Warsaw, Poland
| | - Paweł Sajkiewicz
- Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5b St., 02-106 Warsaw, Poland
| |
Collapse
|
14
|
|
15
|
Yang J, Zhang Y, Qin M, Cheng W, Wang W, Cao Y. Understanding and Regulating Cell-Matrix Interactions Using Hydrogels of Designable Mechanical Properties. J Biomed Nanotechnol 2021; 17:149-168. [PMID: 33785089 DOI: 10.1166/jbn.2021.3026] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Similar to natural tissues, hydrogels contain abundant water, so they are considered as promising biomaterials for studying the influence of the mechanical properties of extracellular matrices (ECM) on various cell functions. In recent years, the growing research on cellular mechanical response has revealed that many cell functions, including cell spreading, migration, tumorigenesis and differentiation, are related to the mechanical properties of ECM. Therefore, how cells sense and respond to the extracellular mechanical environment has gained considerable attention. In these studies, hydrogels are widely used as the in vitro model system. Hydrogels of tunable stiffness, viscoelasticity, degradability, plasticity, and dynamical properties have been engineered to reveal how cells respond to specific mechanical features. In this review, we summarize recent process in this research direction and specifically focus on the influence of the mechanical properties of the ECM on cell functions, how cells sense and respond to the extracellular mechanical environment, and approaches to adjusting the stiffness of hydrogels.
Collapse
Affiliation(s)
- Jiapeng Yang
- Key Laboratory of Intelligent Optical Sensing and Integration, National Laboratory of Solid State Microstructure, and Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
| | - Yu Zhang
- Key Laboratory of Intelligent Optical Sensing and Integration, National Laboratory of Solid State Microstructure, and Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
| | - Meng Qin
- Key Laboratory of Intelligent Optical Sensing and Integration, National Laboratory of Solid State Microstructure, and Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
| | - Wei Cheng
- Department of Oral Implantology Nanjing Stomatological Hospital, Medical School of Nanjing University, Nanjing 210008, China
| | - Wei Wang
- Key Laboratory of Intelligent Optical Sensing and Integration, National Laboratory of Solid State Microstructure, and Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
| | - Yi Cao
- Key Laboratory of Intelligent Optical Sensing and Integration, National Laboratory of Solid State Microstructure, and Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
| |
Collapse
|
16
|
Grover G, Weiss RG. Luminescent Behavior of Gels and Sols Comprised of Molecular Gelators. Gels 2021; 7:19. [PMID: 33671130 PMCID: PMC8005951 DOI: 10.3390/gels7010019] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2021] [Revised: 02/08/2021] [Accepted: 02/11/2021] [Indexed: 12/05/2022] Open
Abstract
We present a brief review of some important conceptual and practical aspects for the design and properties of molecular luminescent gelators and their gels. Topics considered include structural and dynamic aspects of the gels, including factors important to their ability to emit radiation from electronically excited states.
Collapse
Affiliation(s)
| | - Richard G. Weiss
- Department of Chemistry, Institute for Soft Matter Synthesis and Metrology, Georgetown University, Washington, DC 20057, USA;
| |
Collapse
|
17
|
Tang M, Rich JN, Chen S. Biomaterials and 3D Bioprinting Strategies to Model Glioblastoma and the Blood-Brain Barrier. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2004776. [PMID: 33326131 PMCID: PMC7854518 DOI: 10.1002/adma.202004776] [Citation(s) in RCA: 47] [Impact Index Per Article: 15.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/13/2020] [Revised: 09/06/2020] [Indexed: 05/13/2023]
Abstract
Glioblastoma (GBM) is the most prevalent and lethal adult primary central nervous system cancer. An immunosuppresive and highly heterogeneous tumor microenvironment, restricted delivery of chemotherapy or immunotherapy through the blood-brain barrier (BBB), together with the brain's unique biochemical and anatomical features result in its universal recurrence and poor prognosis. As conventional models fail to predict therapeutic efficacy in GBM, in vitro 3D models of GBM and BBB leveraging patient- or healthy-individual-derived cells and biomaterials through 3D bioprinting technologies potentially mimic essential physiological and pathological features of GBM and BBB. 3D-bioprinted constructs enable investigation of cellular and cell-extracellular matrix interactions in a species-matched, high-throughput, and reproducible manner, serving as screening or drug delivery platforms. Here, an overview of current 3D-bioprinted GBM and BBB models is provided, elaborating on the microenvironmental compositions of GBM and BBB, relevant biomaterials to mimic the native tissues, and bioprinting strategies to implement the model fabrication. Collectively, 3D-bioprinted GBM and BBB models are promising systems and biomimetic alternatives to traditional models for more reliable mechanistic studies and preclinical drug screenings that may eventually accelerate the drug development process for GBM.
Collapse
Affiliation(s)
- Min Tang
- Department of NanoEngineering, University of California San Diego, La Jolla, CA, 92093, USA
| | - Jeremy N. Rich
- Division of Regenerative Medicine, Department of Medicine, Department of Neurosciences, University of California San Diego, La Jolla, CA, 92093, USA
- Sanford Consortium for Regenerative Medicine, La Jolla, CA, 92093, USA
| | - Shaochen Chen
- Department of NanoEngineering, University of California San Diego, La Jolla, CA, 92093, USA
- Department of Bioengineering, Materials Science and Engineering Program, Chemical Engineering Program, University of California San Diego, La Jolla, CA, 92093, USA
| |
Collapse
|
18
|
Gómez J, Sierra D, Cárdenas C, Guzmán F. Bio-organometallic Peptide Conjugates: Recent Advances in Their Synthesis and Prospects for Biomedical Application. CURR ORG CHEM 2020. [DOI: 10.2174/1385272824666200309093938] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Abstract
One area of organometallic chemistry that has attracted great interest in recent
years is the syntheses, characterization and study of organometallic complexes conjugated
to biomolecules with different steric and electronic properties as potential therapeutic
agents against cancer and malaria, as antibiotics and as radiopharmaceuticals. This minireview
focuses on the unique structural diversity that has recently been discovered in α-
amino acids and the reactions of metallocene complexes with peptides having different
chemical behavior and potential medical applications. Replacing α-amino acids with metallocene
fragments is an effective way of selectively influencing the physicochemical,
structural, electrochemical and biological properties of the peptides. Consequently, research
in the field of bioorganometallic chemistry offers the opportunity to develop bioactive
metal compounds as an innovative and promising approach in the search for pharmacological control of
different diseases.
Collapse
Affiliation(s)
- Johana Gómez
- Nucleo de Biotecnologia Curauma, Pontificia Universidad Catolica de Valparaiso, Av. Universidad 330, Valparaiso, Chile
| | - Diego Sierra
- Instituto de Quimica y Bioquimica, Facultad de Ciencias, Universidad de Valparaiso, Av. Gran Bretana 1111, Valparaíso, Chile
| | - Constanza Cárdenas
- Nucleo de Biotecnologia Curauma, Pontificia Universidad Catolica de Valparaiso, Av. Universidad 330, Valparaiso, Chile
| | - Fanny Guzmán
- Nucleo de Biotecnologia Curauma, Pontificia Universidad Catolica de Valparaiso, Av. Universidad 330, Valparaiso, Chile
| |
Collapse
|
19
|
Cheng Q, Hao A, Xing P. Stimulus-responsive luminescent hydrogels: Design and applications. Adv Colloid Interface Sci 2020; 286:102301. [PMID: 33160099 DOI: 10.1016/j.cis.2020.102301] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2020] [Revised: 10/24/2020] [Accepted: 10/25/2020] [Indexed: 11/15/2022]
Abstract
Luminescent hydrogels are emerging soft materials with applications in photoelectric, biomedicine, sensors and actuators, which are fabricated via covalently conjugation of luminophors to hydrogelators or physical loading of luminescent organic/inorganic materials into hydrogel matrices. Due to the intrinsic stimulus-responsiveness for hydrogels such as thermo-, pH, ionic strength, light and redox, luminescent hydrogels could respond to external physical or chemical stimuli through varying the luminescent properties such as colors, fluorescent intensity and so on, affording diverse application potential in addition to the pristine individual hydrogels or luminescent materials. Based on the rapid development of such area, here we systematically summarize and discuss the design protocols, properties as well as the applications of stimulus-responsive luminescent hydrogels. Because of the stimuli-responsiveness, biocompatibility, injectable and controllability of luminescent hydrogels, they are widely used as functional smart materials. We illustrate the applications of luminescent hydrogels. The future developments about luminescent hydrogels are also presented.
Collapse
Affiliation(s)
- Qiuhong Cheng
- School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, People's Republic of China
| | - Aiyou Hao
- School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, People's Republic of China
| | - Pengyao Xing
- School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, People's Republic of China.
| |
Collapse
|
20
|
Wei S, Li Z, Lu W, Liu H, Zhang J, Chen T, Tang BZ. Multicolor Fluorescent Polymeric Hydrogels. Angew Chem Int Ed Engl 2020. [DOI: 10.1002/ange.202007506] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Affiliation(s)
- Shuxin Wei
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Zhao Li
- Institute of Engineering Medicine Beijing Institute of Technology 5 South Zhongguancun Street, Haidian District Beijing 100081 China
- Department of Chemistry Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction, and Institute for Advanced Study The Hong Kong University of Science and Technology (HKUST) Clear Water Bay, Kowloon Hong Kong China
| | - Wei Lu
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
- Guangdong Provincial Key Laboratory of Luminescence from Molecular Aggregates South China University of Technology) Guangzhou 510640 China
| | - Hao Liu
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Jiawei Zhang
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Tao Chen
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Ben Zhong Tang
- Department of Chemistry Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction, and Institute for Advanced Study The Hong Kong University of Science and Technology (HKUST) Clear Water Bay, Kowloon Hong Kong China
- Center for Aggregation-Induced Emission SCUT-HKUST Joint Research Institutes State Key Laboratory of Luminescent Materials and Devices South China University of Technology Guangzhou 510640 China
| |
Collapse
|
21
|
Wei S, Li Z, Lu W, Liu H, Zhang J, Chen T, Tang BZ. Multicolor Fluorescent Polymeric Hydrogels. Angew Chem Int Ed Engl 2020; 60:8608-8624. [DOI: 10.1002/anie.202007506] [Citation(s) in RCA: 68] [Impact Index Per Article: 17.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2020] [Revised: 07/03/2020] [Indexed: 01/08/2023]
Affiliation(s)
- Shuxin Wei
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Zhao Li
- Institute of Engineering Medicine Beijing Institute of Technology 5 South Zhongguancun Street, Haidian District Beijing 100081 China
- Department of Chemistry Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction, and Institute for Advanced Study The Hong Kong University of Science and Technology (HKUST) Clear Water Bay, Kowloon Hong Kong China
| | - Wei Lu
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
- Guangdong Provincial Key Laboratory of Luminescence from Molecular Aggregates South China University of Technology) Guangzhou 510640 China
| | - Hao Liu
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Jiawei Zhang
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Tao Chen
- Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective Technologies Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China
- School of Chemical Sciences University of Chinese Academy of Sciences 19A Yuquan Road Beijing 100049 China
| | - Ben Zhong Tang
- Department of Chemistry Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction, and Institute for Advanced Study The Hong Kong University of Science and Technology (HKUST) Clear Water Bay, Kowloon Hong Kong China
- Center for Aggregation-Induced Emission SCUT-HKUST Joint Research Institutes State Key Laboratory of Luminescent Materials and Devices South China University of Technology Guangzhou 510640 China
| |
Collapse
|
22
|
Tavakoli J, Wang J, Chuah C, Tang Y. Natural-based Hydrogels: A Journey from Simple to Smart Networks for Medical Examination. Curr Med Chem 2020; 27:2704-2733. [PMID: 31418656 DOI: 10.2174/0929867326666190816125144] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2018] [Revised: 07/22/2019] [Accepted: 08/01/2019] [Indexed: 02/07/2023]
Abstract
Natural hydrogels, due to their unique biological properties, have been used extensively for various medical and clinical examinations that are performed to investigate the signs of disease. Recently, complex-crosslinking strategies improved the mechanical properties and advanced approaches have resulted in the introduction of naturally derived hydrogels that exhibit high biocompatibility, with shape memory and self-healing characteristics. Moreover, the creation of self-assembled natural hydrogels under physiological conditions has provided the opportunity to engineer fine-tuning properties. To highlight recent studies of natural-based hydrogels and their applications for medical investigation, a critical review was undertaken using published papers from the Science Direct database. This review presents different natural-based hydrogels (natural, natural-synthetic hybrid and complex-crosslinked hydrogels), their historical evolution, and recent studies of medical examination applications. The application of natural-based hydrogels in the design and fabrication of biosensors, catheters and medical electrodes, detection of cancer, targeted delivery of imaging compounds (bioimaging) and fabrication of fluorescent bioprobes is summarised here. Without doubt, in future, more useful and practical concepts will be derived to identify natural-based hydrogels for a wide range of clinical examination applications.
Collapse
Affiliation(s)
- Javad Tavakoli
- Institute of NanoScale Science and Technology, Medical Device Research Institute, College of Science and Engineering, Flinders University, South Australia 5042, Australia.,School of Biomedical Engineering, University of Technology Sydney, Ultimo, 2007 NSW, Australia
| | - Jing Wang
- Institute of NanoScale Science and Technology, Medical Device Research Institute, College of Science and Engineering, Flinders University, South Australia 5042, Australia.,Key Laboratory of Advanced Textile Composite Materials of Ministry of Education, Institute of Textile Composite, School of Textile, Tianjin Polytechnic University, Tianjin 300387, China
| | - Clarence Chuah
- Institute of NanoScale Science and Technology, Medical Device Research Institute, College of Science and Engineering, Flinders University, South Australia 5042, Australia
| | - Youhong Tang
- Institute of NanoScale Science and Technology, Medical Device Research Institute, College of Science and Engineering, Flinders University, South Australia 5042, Australia
| |
Collapse
|
23
|
Tavakoli J, Raston CL, Tang Y. Tuning Surface Morphology of Fluorescent Hydrogels Using a Vortex Fluidic Device. Molecules 2020; 25:E3445. [PMID: 32751141 PMCID: PMC7435964 DOI: 10.3390/molecules25153445] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2020] [Revised: 07/26/2020] [Accepted: 07/27/2020] [Indexed: 12/28/2022] Open
Abstract
In recent decades, microfluidic techniques have been extensively used to advance hydrogel design and control the architectural features on the micro- and nanoscale. The major challenges with the microfluidic approach are clogging and limited architectural features: notably, the creation of the sphere, core-shell, and fibers. Implementation of batch production is almost impossible with the relatively lengthy time of production, which is another disadvantage. This minireview aims to introduce a new microfluidic platform, a vortex fluidic device (VFD), for one-step fabrication of hydrogels with different architectural features and properties. The application of a VFD in the fabrication of physically crosslinked hydrogels with different surface morphologies, the creation of fluorescent hydrogels with excellent photostability and fluorescence properties, and tuning of the structure-property relationship in hydrogels are discussed. We conceive, on the basis of this minireview, that future studies will provide new opportunities to develop hydrogel nanocomposites with superior properties for different biomedical and engineering applications.
Collapse
Affiliation(s)
- Javad Tavakoli
- Centre for Health Technologies, School of Biomedical Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Ultimo NSW 2007, Australia;
- Institute for NanoScale Science and Technology, College of Science and Engineering, Flinders University, Bedford Park, SA 5042, Australia;
| | - Colin L. Raston
- Institute for NanoScale Science and Technology, College of Science and Engineering, Flinders University, Bedford Park, SA 5042, Australia;
| | - Youhong Tang
- Institute for NanoScale Science and Technology, College of Science and Engineering, Flinders University, Bedford Park, SA 5042, Australia;
| |
Collapse
|
24
|
Hedegaard CL, Mata A. Integrating self-assembly and biofabrication for the development of structures with enhanced complexity and hierarchical control. Biofabrication 2020; 12:032002. [DOI: 10.1088/1758-5090/ab84cb] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
25
|
Liu H, Wei S, Qiu H, Zhan B, Liu Q, Lu W, Zhang J, Ngai T, Chen T. Naphthalimide‐Based Aggregation‐Induced Emissive Polymeric Hydrogels for Fluorescent Pattern Switch and Biomimetic Actuators. Macromol Rapid Commun 2020; 41:e2000123. [DOI: 10.1002/marc.202000123] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/09/2020] [Revised: 04/26/2020] [Indexed: 11/07/2022]
Affiliation(s)
- Hao Liu
- Key Laboratory of Marine Materials and Related TechnologiesZhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of Sciences Ningbo 315201 China
- School of Chemical SciencesUniversity of Chinese Academy of Sciences Beijing 100049 China
| | - Shuxin Wei
- Key Laboratory of Marine Materials and Related TechnologiesZhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of Sciences Ningbo 315201 China
- School of Chemical SciencesUniversity of Chinese Academy of Sciences Beijing 100049 China
| | - Huiyu Qiu
- Key Laboratory of Marine Materials and Related TechnologiesZhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of Sciences Ningbo 315201 China
| | - Beibei Zhan
- Key Laboratory of Marine Materials and Related TechnologiesZhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of Sciences Ningbo 315201 China
- School of Materials Science and TechnologyHunan Provincial Key Laboratory of Advanced Materials for New Energy Storage and ConversionHunan University of Science and Technology Xiangtan 411201 China
| | - Qingquan Liu
- School of Materials Science and TechnologyHunan Provincial Key Laboratory of Advanced Materials for New Energy Storage and ConversionHunan University of Science and Technology Xiangtan 411201 China
| | - Wei Lu
- Key Laboratory of Marine Materials and Related TechnologiesZhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of Sciences Ningbo 315201 China
- School of Chemical SciencesUniversity of Chinese Academy of Sciences Beijing 100049 China
| | - Jiawei Zhang
- Key Laboratory of Marine Materials and Related TechnologiesZhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of Sciences Ningbo 315201 China
- School of Chemical SciencesUniversity of Chinese Academy of Sciences Beijing 100049 China
| | - To Ngai
- Department of ChemistryThe Chinese University of Hong Kong Shatin, N.T. Hong Kong 999077 China
| | - Tao Chen
- Key Laboratory of Marine Materials and Related TechnologiesZhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of Sciences Ningbo 315201 China
- School of Chemical SciencesUniversity of Chinese Academy of Sciences Beijing 100049 China
| |
Collapse
|
26
|
Lee KH, Zhang YZ, Jiang Q, Kim H, Alkenawi AA, Alshareef HN. Ultrasound-Driven Two-Dimensional Ti 3C 2T x MXene Hydrogel Generator. ACS NANO 2020; 14:3199-3207. [PMID: 32078295 DOI: 10.1021/acsnano.9b08462] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Ultrasound is a source of ambient energy that is rarely exploited. In this work, a tissue-mimicking MXene-hydrogel (M-gel) implantable generator has been designed to convert ultrasound power into electric energy. Unlike the present harvesting methods for implantable ultrasound energy harvesters, our M-gel generator is based on an electroacoustic phenomenon known as the streaming vibration potential. Moreover, the output power of the M-gel generator can be improved by coupling with triboelectrification. We demonstrate the potential of this generator for powering implantable devices through quick charging of electric gadgets, buried beneath a centimeter thick piece of beef. The performance is attractive, especially given the extremely simple structure of the generator, consisting of nothing more than encapsulated M-gel. The generator can harvest energy from various ultrasound sources, from ultrasound tips in the lab to the probes used in hospitals and households for imaging and physiotherapy.
Collapse
Affiliation(s)
- Kang Hyuck Lee
- Materials Science and Engineering, Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Yi-Zhou Zhang
- Materials Science and Engineering, Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Qiu Jiang
- Materials Science and Engineering, Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Hyunho Kim
- Materials Science and Engineering, Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Abdulkader A Alkenawi
- College of Applied Medical Science, King Saud bin Abdulaziz University for Health Sciences, Jeddah 22384, Saudi Arabia
| | - Husam N Alshareef
- Materials Science and Engineering, Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| |
Collapse
|
27
|
Gillispie G, Prim P, Copus J, Fisher J, Mikos AG, Yoo JJ, Atala A, Lee SJ. Assessment methodologies for extrusion-based bioink printability. Biofabrication 2020; 12:022003. [PMID: 31972558 PMCID: PMC7039534 DOI: 10.1088/1758-5090/ab6f0d] [Citation(s) in RCA: 133] [Impact Index Per Article: 33.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
Extrusion-based bioprinting is one of the leading manufacturing techniques for tissue engineering and regenerative medicine. Its primary limitation is the lack of materials, known as bioinks, which are suitable for the bioprinting process. The degree to which a bioink is suitable for bioprinting has been described as its 'printability.' However, a lack of clarity surrounding the methodologies used to evaluate a bioink's printability, as well as the usage of the term itself, have hindered the field. This article presents a review of measures used to assess the printability of extrusion-based bioinks in an attempt to assist researchers during the bioink development process. Many different aspects of printability exist and many different measurements have been proposed as a consequence. Researchers often do not evaluate a new bioink's printability at all, while others simply do so qualitatively. Several quantitative measures have been presented for the extrudability, shape fidelity, and printing accuracy of bioinks. Different measures have been developed even within these aspects, each testing the bioink in a slightly different way. Additionally, other relevant measures which had little or no examples of quantifiable methods are also to be considered. Looking forward, further work is needed to improve upon current assessment methodologies, to move towards a more comprehensive view of printability, and to standardize these printability measurements between researchers. Better assessment techniques will naturally lead to a better understanding of the underlying mechanisms which affect printability and better comparisons between bioinks. This in turn will help improve upon the bioink development process and the bioinks available for use in bioprinting.
Collapse
Affiliation(s)
- Gregory Gillispie
- Wake Forest Institute for Regenerative Medicine, Wake Forest School of Medicine, Winston-Salem, North Carolina, USA
- School of Biomedical Engineering and Sciences, Wake Forest University-Virginia Tech, Winston-Salem, North Carolina, USA
| | - Peter Prim
- Wake Forest Institute for Regenerative Medicine, Wake Forest School of Medicine, Winston-Salem, North Carolina, USA
| | - Joshua Copus
- Wake Forest Institute for Regenerative Medicine, Wake Forest School of Medicine, Winston-Salem, North Carolina, USA
- School of Biomedical Engineering and Sciences, Wake Forest University-Virginia Tech, Winston-Salem, North Carolina, USA
| | - John Fisher
- Fischell Department of Bioengineering, University of Maryland, College Park, Maryland, USA
| | - Antonios G. Mikos
- Departments of Bioengineering and Chemical and Biomolecular Engineering, Rice University, Houston, Texas, USA
| | - James J. Yoo
- Wake Forest Institute for Regenerative Medicine, Wake Forest School of Medicine, Winston-Salem, North Carolina, USA
- School of Biomedical Engineering and Sciences, Wake Forest University-Virginia Tech, Winston-Salem, North Carolina, USA
| | - Anthony Atala
- Wake Forest Institute for Regenerative Medicine, Wake Forest School of Medicine, Winston-Salem, North Carolina, USA
- School of Biomedical Engineering and Sciences, Wake Forest University-Virginia Tech, Winston-Salem, North Carolina, USA
| | - Sang Jin Lee
- Wake Forest Institute for Regenerative Medicine, Wake Forest School of Medicine, Winston-Salem, North Carolina, USA
- School of Biomedical Engineering and Sciences, Wake Forest University-Virginia Tech, Winston-Salem, North Carolina, USA
| |
Collapse
|
28
|
Martin AD, Thordarson P. Beyond Fmoc: a review of aromatic peptide capping groups. J Mater Chem B 2020; 8:863-877. [PMID: 31950969 DOI: 10.1039/c9tb02539a] [Citation(s) in RCA: 43] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Self-assembling short peptides have attracted widespread interest due to their tuneable, biocompatible nature and have potential applications in energy materials, tissue engineering, sensing and drug delivery. The hierarchical self-assembly of these peptides is highly dependent on the selection of not only amino acid sequence, but also the capping group which is often employed at the N-terminus of the peptide to drive self-assembly. Although the Fmoc (9H-fluorenylmethyloxycarbonyl) group is commonly used due to its utility in solid phase peptide synthesis, many other aromatic capping groups have been reported which yield functional, responsive materials. This review explores recent developments in the utilisation of functional, aromatic capping groups beyond the Fmoc group for the creation of redox-responsive, fluorescent and drug delivering hydrogel scaffolds.
Collapse
Affiliation(s)
- Adam D Martin
- Dementia Research Centre, Department of Biomedical Science, Faculty of Medicine and Health Sciences, Macquarie University, Sydney, NSW 2109, Australia.
| | - Pall Thordarson
- School of Chemistry, The Australian Centre for Nanomedicine and the ARC Centre of Excellence in Convergent Bio-Nano Science & Technology, University of New South Wales, Sydney, NSW 2052, Australia.
| |
Collapse
|
29
|
Nikoloudakis E, Mitropoulou K, Landrou G, Charalambidis G, Nikolaou V, Mitraki A, Coutsolelos AG. Self-assembly of aliphatic dipeptides coupled with porphyrin and BODIPY chromophores. Chem Commun (Camb) 2019; 55:14103-14106. [PMID: 31603154 DOI: 10.1039/c9cc06125h] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
In this work, the self assembly ability of chromophores covalently linked to aliphatic dipeptides is described. Altering various parameters such as the protecting group, the solvent mixture, the dipeptide and the chromophore resulted in different nanostructures. Interestingly, a peptide-porphyrin hybrid is capable of forming a hydrogel in HFIP-water solvent mixture.
Collapse
Affiliation(s)
- Emmanouil Nikoloudakis
- Department of Chemistry, University of Crete, Laboratory of Bioinorganic Chemistry, Voutes Campus, 70013 Heraklion, Crete, Greece.
| | - Konstantina Mitropoulou
- University of Crete, Department of Materials Science and Technology and Institute of Electronic Structure and Laser (I.E.S.L.), Foundation for Research and Technology - Hellas (FO.R.T.H.), Vassilika Vouton, Heraklion, 70013, Crete, Greece.
| | - Georgios Landrou
- Department of Chemistry, University of Crete, Laboratory of Bioinorganic Chemistry, Voutes Campus, 70013 Heraklion, Crete, Greece.
| | - Georgios Charalambidis
- Department of Chemistry, University of Crete, Laboratory of Bioinorganic Chemistry, Voutes Campus, 70013 Heraklion, Crete, Greece.
| | - Vasilis Nikolaou
- Department of Chemistry, University of Crete, Laboratory of Bioinorganic Chemistry, Voutes Campus, 70013 Heraklion, Crete, Greece.
| | - Anna Mitraki
- University of Crete, Department of Materials Science and Technology and Institute of Electronic Structure and Laser (I.E.S.L.), Foundation for Research and Technology - Hellas (FO.R.T.H.), Vassilika Vouton, Heraklion, 70013, Crete, Greece.
| | - Athanassios G Coutsolelos
- Department of Chemistry, University of Crete, Laboratory of Bioinorganic Chemistry, Voutes Campus, 70013 Heraklion, Crete, Greece.
| |
Collapse
|
30
|
Wang X, Wei C, Gao S, He B, Lin Y. Assembly of (l+d)-Tryptophan Derivatives Containing an Imidazole Group Selectively Forms a Rare Purple Ni 2+-Hydrogel. ChemistryOpen 2019; 8:1172-1175. [PMID: 31497471 PMCID: PMC6718073 DOI: 10.1002/open.201900214] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2019] [Revised: 07/08/2019] [Indexed: 01/09/2023] Open
Abstract
Design of metal-selective hydrogels is attractive due to potential applications in materials and biological sciences. Although much progress has been made, assembly of both l- and d-amino acid derivatives was less explored for design of metallohydrogels. In this study, we synthesized a facile and small tryptophan derivative containing an imidazole ligand with both l- and d- configurations (denoted as l/d-ImW). Intriguingly, the assembly of (l+d)-ImW gelators was found to selectively form a Ni2+-hydrogel in aqueous medium at room temperature, which shows a rare purple color and exhibits excellent multi-responsiveness. In addition to insights into the gelation mechanism, this study provides a novel approach to the design of metallohydrogels, by the assembly of (l+d)-amino acid derivatives containing both aromatic rings and multiple metal coordination sites.
Collapse
Affiliation(s)
- Xiao‐Juan Wang
- School of Chemistry and Chemical EngineeringUniversity of South ChinaHengyang421001China
- Hunan Key Laboratory for the Design and Application of Actinide ComplexesUniversity of South ChinaHengyang421001China
| | - Chuan‐Wan Wei
- School of Chemistry and Chemical EngineeringUniversity of South ChinaHengyang421001China
- Hunan Key Laboratory for the Design and Application of Actinide ComplexesUniversity of South ChinaHengyang421001China
| | - Shu‐Qin Gao
- Laboratory of Protein Structure and FunctionUniversity of South ChinaHengyang421001China
| | - Bo He
- School of Chemistry and Chemical EngineeringUniversity of South ChinaHengyang421001China
- Hunan Key Laboratory for the Design and Application of Actinide ComplexesUniversity of South ChinaHengyang421001China
| | - Ying‐Wu Lin
- School of Chemistry and Chemical EngineeringUniversity of South ChinaHengyang421001China
- Hunan Key Laboratory for the Design and Application of Actinide ComplexesUniversity of South ChinaHengyang421001China
- Laboratory of Protein Structure and FunctionUniversity of South ChinaHengyang421001China
| |
Collapse
|
31
|
Li P, Zhang D, Zhang Y, Lu W, Zhang J, Wang W, He Q, Théato P, Chen T. Aggregation-Caused Quenching-Type Naphthalimide Fluorophores Grafted and Ionized in a 3D Polymeric Hydrogel Network for Highly Fluorescent and Locally Tunable Emission. ACS Macro Lett 2019; 8:937-942. [PMID: 35619491 DOI: 10.1021/acsmacrolett.9b00337] [Citation(s) in RCA: 38] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
Polymer hydrogels with intense yet tunable fluorescence are of great research interest due to their wide potential use in biological imaging, sensing, information storage, etc. However, the conventional fluorophores such as naphthalimide and its derivatives are usually not recommended to prepare highly fluorescent hydrogels because of their aggregation-caused quenching (ACQ) nature and spontaneous tendency to undergo fluorescence self-quenching in quasi-solid-state hydrogel systems. Additionally, local regulation over fluorescent behavior of hydrogels, despite being important, still remains underdeveloped. Herein, we report highly fluorescent polymeric hydrogels based on conventional ACQ-type naphthalimide fluorophores, followed by spatial and temporal control of their fluorescent behavior. The hydrogels were prepared by one-pot radical copolymerization of naphthalimide-containing monomer and acrylamide in chitosan-acetic acid solution. Their intense emission comes from synergetic anchoring and diluting effect of the protonated naphthalimide moieties grafted on polymer chains, which result in the electrostatic repulsion among ACQ luminogens and reduced PET (photoinduced electron transfer) effect from adjacent dimethylamine groups to naphthalimide fluorophores. After being deprotonated in alkaline conditions, both PET and the ACQ effect work again to greatly quench fluorescence, endowing the hydrogels with pH-sensitive emission behavior. These properties encourage us to develop a diffusion-reaction (D-R) method to spatially and temporally control their fluorescent behavior. Based on these results, the ion-transfer-printing-assisted D-R method was further developed to fabricate many high-precision and meaningful fluorescent patterns on hydrogels. These fluorescent patterns are invisible under daylight but become vivid under specific UV light illumination, suggesting their wide potential applications in information security and transmission.
Collapse
Affiliation(s)
- Ping Li
- Faculty of Materials Science and Chemical Engineering, Ningbo University, 818 Fenghua Road, Ningbo 315211, China
- Key Laboratory of Bio-Based Polymeric Materials Technology and Application of Zhejiang Province, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Dong Zhang
- Department of Chemical & Biomolecular Engineering, The University of Akron, Akron, Ohio 44325, United States
| | - Yuchong Zhang
- Key Laboratory of Bio-Based Polymeric Materials Technology and Application of Zhejiang Province, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Wei Lu
- Key Laboratory of Bio-Based Polymeric Materials Technology and Application of Zhejiang Province, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Jiawei Zhang
- Key Laboratory of Bio-Based Polymeric Materials Technology and Application of Zhejiang Province, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Wenqin Wang
- Faculty of Materials Science and Chemical Engineering, Ningbo University, 818 Fenghua Road, Ningbo 315211, China
| | - Qingsong He
- Jiangsu Provincial Key Laboratory of Bionic Functional Materials, Institute of Bio-inspired Structure and Surface Engineering, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China
| | - Patrick Théato
- Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesser Str. 18, D-76131 Karlsruhe, Germany
| | - Tao Chen
- Key Laboratory of Bio-Based Polymeric Materials Technology and Application of Zhejiang Province, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| |
Collapse
|
32
|
Wei CW, Wang XJ, Gao SQ, Wen GB, Lin YW. A La 3+-selective metallohydrogel with a facile gelator of a phenylalanine derivative containing an imidazole group. Dalton Trans 2018; 47:13788-13791. [PMID: 30252009 DOI: 10.1039/c8dt03557a] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
The first La3+-selective metallohydrogel was constructed by using a facile gelator of a phenylalanine derivative containing an imidazole group, N-(1H-imidazol-4-yl)methylidene-l-phenylalanine, namely La-ImF, which exhibits multi-stimuli responsive properties, including to heat, shearing, pH, etc. Various measurements were also carried out to obtain insights into the mechanism of gelation. Moreover, the La-ImF hydrogel can adsorb toxic dyes, making it a potential candidate for sewage treatment.
Collapse
Affiliation(s)
- Chuan-Wan Wei
- School of Chemistry and Chemical Engineering, University of South China, Hengyang 421001, China.
| | | | | | | | | |
Collapse
|
33
|
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering. J Funct Biomater 2018; 9:jfb9010022. [PMID: 29494503 PMCID: PMC5872108 DOI: 10.3390/jfb9010022] [Citation(s) in RCA: 238] [Impact Index Per Article: 39.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/16/2018] [Revised: 02/23/2018] [Accepted: 02/26/2018] [Indexed: 12/13/2022] Open
Abstract
Three-dimensional printing has significant potential as a fabrication method in creating scaffolds for tissue engineering. The applications of 3D printing in the field of regenerative medicine and tissue engineering are limited by the variety of biomaterials that can be used in this technology. Many researchers have developed novel biomaterials and compositions to enable their use in 3D printing methods. The advantages of fabricating scaffolds using 3D printing are numerous, including the ability to create complex geometries, porosities, co-culture of multiple cells, and incorporate growth factors. In this review, recently-developed biomaterials for different tissues are discussed. Biomaterials used in 3D printing are categorized into ceramics, polymers, and composites. Due to the nature of 3D printing methods, most of the ceramics are combined with polymers to enhance their printability. Polymer-based biomaterials are 3D printed mostly using extrusion-based printing and have a broader range of applications in regenerative medicine. The goal of tissue engineering is to fabricate functional and viable organs and, to achieve this, multiple biomaterials and fabrication methods need to be researched.
Collapse
|