The theoretical molecular weight of NaYF 4 :RE upconversion nanoparticles

Superfluorescent upconversion nanoparticles as an emerging second generation quantum technology material

Superfluorescence (SF) in lanthanide doped upconversion nanoparticles (UCNPs) is a room-temperature quantum phenomenon, first discovered in 2022. In a SF process, the many emissive lanthanide ions within a single UCNP are coherently coupled by an ultra-short (ns or fs) high-power excitation laser pulse. This leads to a superposition of excited emissive states which decrease the emissive lifetime of the UCNP by a factor proportional to the square of the number of lanthanide ions which are coherently coupled. This results in a dramatic decrease in UCNP emission lifetime from the μs regime to the ns regime. Thus SF offers a tantalizing prospect to achieving superior upconversion photon flux in upconversion materials, with potential applications such as imaging and sensing. This perspective article contextualizes how SF-UCNPs can be regarded as a second generation quantum technology, and notes several challenges, opportunities, and open questions for the development of SF-UCNPs.

Curvature-guided depletion stabilizes Kagome superlattices of nanocrystals

Shape-anisotropic nanocrystals and patchy particles have been explored to construct complex superstructures, but most studies have focused on convex shapes. We report that nonconvex, dumbbell-shaped nanocrystals (nanodumbbells) exhibit globally interlocking self-assembly behaviors governed by curvature-guided depletion interactions. By tailoring the local curvature of nanodumbbells, we can precisely and flexibly adjust particle bonding directionality, a level of control rarely achievable with conventional convex building blocks. These nanodumbbells can undergo long-range ordered assembly into various intricate two-dimensional superlattices, including the chiral Kagome lattice. Theoretical calculations reveal that the Kagome lattice is a thermodynamically stable phase, with depletion interactions playing a crucial role in stabilizing these non-close-packed structures. The emergence of Kagome lattices and other unusual structures highlights the vast potential of nonconvex nanocrystals for creating sophisticated architectures.

Autoclave reactor synthesis of upconversion nanoparticles, unreported variables, and safety considerations

Autoclave reactors are widely used across chemical and biological sciences, including for the synthesis of upconversion nanoparticles (UCNPs) and other nanomaterials. Yet, the details of how autoclave reactors are used in such synthesis are rarely reported in the literature, leaving several key synthesis variables widely unreported and thereby hampering experimental reproducibility. In this perspective, we discuss the safety considerations of autoclave reactors and note that autoclaves should only be used if they are (a) purchased from reputable suppliers/manufacturers and (b) have been certified compliant with relevant safety standards. Ultimately, using unsuitable autoclave equipment can pose a severe physical hazard and may breach legal safety requirements. In addition, we highlight several parameters in autoclave synthesis that should be reported as standard to maximise the reproducibility of autoclave synthesis experiments across materials and chemistry research. We encourage users of autoclave synthesis vessels to: (1) adopt high-safety autoclaves and (2) report the many experimental variables involved to enhance experimental reproducibility.

Direct Observation of Morphological and Chemical Changes during the Oxidation of Model Inorganic Ligand-Capped Particles

Functionalization and volatilization are competing reactions during the oxidation of carbonaceous materials and are important processes in many different areas of science and technology. Here, we present a combined ambient pressure X-ray photoelectron spectroscopy (APXPS) and grazing incidence X-ray scattering (GIXS) investigation of the oxidation of oleic acid ligands surrounding NaYF4 nanoparticles (NPs) deposited onto SiOx/Si substrates. While APXPS monitors the evolution of the oxidation products, GIXS provides insight into the morphology of the ligands and particles before and after the oxidation. Our investigation shows that the oxidation of the oleic acid ligands proceeds at O2 partial pressures of below 1 mbar in the presence of X-rays, with the oxidation eventually reaching a steady state in which mainly CHx and -COOH functional groups are observed. The scattering data reveal that the oxidation and volatilization reaction proceeds preferentially on the side of the particle facing the gas phase, leading to the formation of a chemically and morphologically asymmetric ligand layer. This comprehensive picture of the oxidation process could be obtained only by combining the X-ray scattering and APXPS data. The investigation presented here lays the foundation for further studies of the stability of NP layers in the presence of reactive trace gases and ionizing radiation and for other nanoscale systems where chemical and morphological changes happen simultaneously and cannot be understood in isolation.

Nucleic acid-functionalized upconversion luminescence biosensor based on strand displacement-mediated signal amplification for the detection of trivalent chromium ions

BACKGROUND

Rapid industrial development has generated serious pollution, including the presence of toxic and harmful heavy metal ions. Among them, trivalent chromium ion (Cr3+) is a very important element that poses a threat to life and health in our industrial wastewater pollution. Thus, it is important to develop efficient fluorescence methods for Cr3+ detection. In this study, an upconversion luminescence biosensor for detecting Cr3+ was constructed based on a DNAzyme, strand displacement reaction (SDR), and DNA-functionalized upconversion nanoparticles (UCNPs).

RESULTS

The sulfonate-rich poly (sodium 4-styrene sulfonate) (PSS) was modified onto the surface of UCNPs, forming UCNPs@PSS. Then, NH2-Capture probe DNA (NH2-Cp) was further modified onto the UCNPs@PSS surface through sulfonylation, resulting in UCNPs@PSS@NH2-Cp. The DNAzyme activated by Cr3+ triggered the release of the primer probe (Pp), which initiated the SDR system cycle, thereby releasing a tetramethylrhodamine (TAMRA)-modified signal probe (TAMRA-Sp). Finally, UCNPs@PSS@NH2-Cp bound to TAMRA-Sp through complementary base pairing, causing UCNPs and TAMRA to approach each other. Because of the luminescence resonance energy transfer (LRET) mechanism, the upconversion luminescence (UCL) signal of the UCNPs was quenched by TAMRA, enabling the detection of Cr3+ by the change of I585/I545 ratio. This biosensor has good stability, selectivity, and sensitivity, with a linear range of 0.5-75 nM and a detection limit of 0.135 nM for Cr3+.

SIGNIFICANCE AND NOVELTY

Firstly, based on LRET between UCNPs and TAMRA, the quantitative analysis of Cr3+ is achieved through the changes of ratio fluorescence. Secondly, the specificity of the biosensor is improved by utilizing the specific recognition of DNA enzymes. Thirdly, the signal amplification technology of the SDR cycle greatly improves the sensitivity of biosensor. This biosensor will be useful for future environmental safety monitoring and biopsy of biological fluids.

Assessing the Effect of Surface Coating on the Stability, Degradation, Toxicity and Cell Endocytosis/Exocytosis of Upconverting Nanoparticles

Lanthanide-doped up-converting nanoparticles (UCNPs) have emerged as promising biomedical tools in recent years. Most research efforts were devoted to the synthesis of inorganic cores with the optimal physicochemical properties. However, the careful design of UCNPs with the adequate surface coating to optimize their biological performance still remains a significant challenge. Here, we propose the functionalization of UCNPs with four distinct types of surface coatings, which were compared in terms of the provided colloidal stability and resistance to degradation in different biological-relevant media, including commonly avoided analysis in acidic lysosomal-mimicking fluids. Moreover, the influence of the type of particle surface coating on cell cytotoxicity and endocytosis/exocytosis was also evaluated. The obtained results demonstrated that the functionalization of UCNPs with poly(isobutylene-alt-maleic anhydride) grafted with dodecylamine (PMA-g-dodecyl) constitutes an outstanding strategy for their subsequent biomedical application, whereas poly(ethylene glycol) (PEG) coating, although suitable for colloidal stability purposes, hinders extensive cell internalization. Conversely, surface coating with small ligand were found not to be suitable, leading to large degradation degrees of UCNPs. The analysis of particle' behavior in different biological media and in vitro conditions here performed pretends to help researchers to improve the design and implementation of UCNPs as theranostic nanotools.

Boosting Upconversion Efficiency in Optically Inert Shelled Structures with Electroactive Membrane through Electron Donation

This study innovatively addresses challenges in enhancing upconversion efficiency in lanthanide-based nanoparticles (UCNPs) by exploiting Shewanella oneidensis MR-1, a microorganism capable of extracellular electron transfer. Electroactive membranes, rich in c-type cytochromes, are extracted from bacteria and integrated into membrane-integrated liposomes (MILs), encapsulating core-shelled UCNPs with an optically inactive shell, forming UCNP@MIL constructs. The electroactive membrane, tailored to donate electrons through the inert shell, independently boosts upconversion emission under near-infrared excitation (980 or 1550 nm), bypassing ligand-sensitized UCNPs. The optically inactive shell restricts energy migration, emphasizing electroactive membrane electron donation. Density functional theory calculations elucidate efficient electron transfer due to the electroactive membrane hemes' highest occupied molecular orbital being higher than the valence band maximum of the optically inactive shell, crucial for enhancing energy transfer to emitter ions. The introduction of a SiO2 insulator coating diminishes light enhancement, underscoring the importance of unimpeded electron transfer. Luminescence enhancement remains resilient to variations in emitter or sensitizing ions, highlighting the robustness of the electron transfer-induced phenomenon. However, altering the inert shell material diminishes enhancement, emphasizing the role of electron transfer. This methodology holds significant promise for diverse biological applications. UCNP@MIL offers an advantage in cellular uptake, which proves beneficial for cell imaging.

Ultrasensitive determination of surface proteins on tumor-derived small extracellular vesicles for breast cancer identification based on lanthanide-activated signal amplification strategy

Small extracellular vesicles (sEVs) carrying multiple tumor-associated proteins inherited from parental cells play crucial roles in noninvasive breast cancer (BC) diagnosis. However, it is challenging to assess the subtle variations of surface proteins on sEV membranes due to the highly heterogeneous BC. Therefore, a simple and ultrasensitive assay based on lanthanide (Ln3+)-activated luminescence signal amplification was developed to detect multiple surface proteins on BC-derived sEVs. Multiple protein biomarkers on sEVs can be well identified with high sensitivity and specificity through dissolution-amplified luminescence of the NaEuF4 nanoparticle-based nanoprobe. We employ linear discriminant analysis to successfully discriminate triple negative BC cell (MDA-MB-231 cell) derived sEVs from other breast cell lines (MCF-7, SK-BR-3, BT474 and MCF-10A cell). Furthermore, the strategy enables high accuracy for districting the progression stages of BC patients and healthy donors. The simple and sensitive signal amplification strategy exhibits great potential for early clinic diagnosis by precise protein profiling of sEVs.

Synthesis, Characterization and Broad-Spectrum Bactericidal Effects of Ammonium Methyl and Ammonium Ethyl Styrene-Based Nanoparticles

Untreatable infections, growing healthcare costs, and increasing human mortality due to the rising resistance of bacteria to most of the available antibiotics are global phenomena that urgently require the discovery of new and effective antimicrobial agents. Cationic macromolecules, acting as membrane disruptors, are widely studied, and several compounds, including two styrene-based copolymers developed by us (P5 and P7), have proved to possess potent broad-spectrum antibacterial effects, regardless of the resistance profiles of the bacteria. Here, we first reported the synthesis and physicochemical characterization of new cationic nanoparticles (NPs) (CP1 and OP2), obtained by polymerizing the monomers 4-ammoniummethylstyrene (4-AMSTY) and 4-ammoniumethylstyrene (4-AESTY) hydrochlorides, whose structures were designed using the cationic monomers of P5 and P7 as template compounds. The antibacterial activity of CP1 and OP2 was assessed against several Gram-positive and Gram-negative multi-drug resistant (MDR) pathogens, observing potent antibacterial effects for both CP1 (MICs = 0.1-0.8 µM) and OP2 (MICs = 0.35-2.8 µM) against most of the tested isolates. Additionally, time-killing studies carried out with CP1 and OP2 on different strains of the most clinically relevant MDR species demonstrated that they kill pathogens rapidly. Due to their interesting physicochemical characteristics, which could enable their mutual formulation as hydrogels, CP1 and OP2 could represent promising ingredients for the development of novel antibacterial dosage forms for topical applications, capable of overcoming severe infections sustained by bacteria resistant to the presently available antibiotics.

pH-responsive polyelectrolyte complexation on upconversion nanoparticles: a multifunctional nanocarrier for protection, delivery, and 3D-imaging of therapeutic protein

The delicate tertiary structure of proteins, their susceptibility to heat- and enzyme-induced irreversible denaturation, and their tendency to get accumulated at the cell membrane during uptake are daunting challenges in proteinaceous therapeutic delivery. Herein, a polyelectrolyte complex having encapsulated therapeutic protein has been designed on the surface of upconverting luminescent nanoparticles (NaYF₄:20%Yb³⁺,2%Er³⁺). This nanosized complex system has been found to overcome the challenges of protein aggregation at the cell membrane. It has also defended the cargo from denaturation against (a) enzymatic action of proteinase K and (b) heat (up to 60 °C). Additionally, the nanoparticles at the core of the loaded carrier served as near-infrared (980 nm) responsive probe to accomplish extended-duration 3D imaging during protein delivery. The outer layer of polymer played pivotal role to protect/retrieve the protein structure from denaturation as investigated by circular dichroism studies. Both the masked surface-charges of protein and the nanoscale size of the loaded carrier have facilitated their efficient passage through the cell membrane as observed through 3D images/videos. This nanocarrier is the first of its kind for direct delivery of protein. Thus, the findings can be useful to protect and transport various proteinaceous materials to overcome challenges of accumulation at the cell-membrane and low-temperature storage, as nature does.

Resonance Energy Transfer to Track the Motion of Lanthanide Ions—What Drives the Intermixing in Core-Shell Upconverting Nanoparticles?

The imagination of clearly separated core-shell structures is already outdated by the fact, that the nanoparticle core-shell structures remain in terms of efficiency behind their respective bulk material due to intermixing between core and shell dopant ions. In order to optimize the photoluminescence of core-shell UCNP the intermixing should be as small as possible and therefore, key parameters of this process need to be identified. In the present work the Ln(III) ion migration in the host lattices NaYF₄ and NaGdF₄ was monitored. These investigations have been performed by laser spectroscopy with help of lanthanide resonance energy transfer (LRET) between Eu(III) as donor and Pr(III) or Nd(III) as acceptor. The LRET is evaluated based on the Förster theory. The findings corroborate the literature and point out the migration of ions in the host lattices. Based on the introduced LRET model, the acceptor concentration in the surrounding of one donor depends clearly on the design of the applied core-shell-shell nanoparticles. In general, thinner intermediate insulating shells lead to higher acceptor concentration, stronger quenching of the Eu(III) donor and subsequently stronger sensitization of the Pr(III) or the Nd(III) acceptors. The choice of the host lattice as well as of the synthesis temperature are parameters to be considered for the intermixing process.

Hydrophobic Cargo Encapsulation into Virus Protein Cages by Self-Assembly in an Aprotic Organic Solvent

While extensive studies of virus capsid assembly in environments mimicking in vivo conditions have led to an understanding of the thermodynamic driving forces at work, applying this knowledge to virus assembly in other solvents than aqueous buffers has not been attempted yet. In this study, Brome mosaic virus (BMV) capsid proteins were shown to preserve their self-assembly abilities in an aprotic polar solvent, dimethyl sulfoxide (DMSO). This facilitated protein cage encapsulation of nanoparticles and dye molecules that favor organic solvents, such as β-NaYF4-based upconversion nanoparticles and BODIPY dye. Assembly was found to be robust relative to a surprisingly broad range of DMSO concentrations. Cargos with poor initial stability in aqueous solutions were readily encapsulated at high DMSO concentrations and then transferred to aqueous solvents, where they remained stable and preserved their function for months.

Structures, plasmon-enhanced luminescence, and applications of heterostructure phosphors

Heterostructure phosphor composites have been used widely in the fields of targeted bio-probes and bio-imaging, hyperthermia treatment, photocatalysis, solar cells, and fingerprint identification. The structures, plasmon-enhanced luminescence and mechanism of metal/fluorophore heterostructure composites, such as core-shell nanocrystals, multilayers, adhesion, islands, arrays, and composite optical glass, are reviewed in detail. Their extended applications were explored widely since the surface plasmon resonance effect increased the up-conversion efficiency of fluorophores significantly. We summarize their synthesis methods, size and shape control, absorption and excitation spectra, plasmon-enhanced up-conversion luminescence, and specific applications. The most important results acquired in each case are summarized, and the main challenges that need to be overcome are discussed.

Competitive immune-nanoplatforms with positive readout for the rapid detection of imidacloprid using gold nanoparticles

Two high-sensitivity competitive immune-nanoplatforms based on the inner filter effect (IFE-IN) and magnetic separation (MS-IN) with a positive readout were developed to rapidly detect imidacloprid (IMI) using gold nanoparticles (AuNPs). For IFE-IN, IMI competes with AuNPs-labeled IMI antigens (IMI-BSA-AuNPs) to bind with anti-IMI monoclonal antibody (mAb)-conjugated NaYF4:Yb,Er upconversion nanoparticles, which changes the fluorescence signal at excitation/emission wavelength of 980/544 nm. For MS-IN, the immunocomplex of IMI-BSA-AuNPs and magnetic-nanoparticles-labeled mAb (mAb-MNPs) dissociates in the presence of IMI, and the optical density of IMI-BSA-AuNPs at 525 nm increases with the IMI concentration after magnetic separation. Under the optimal conditions, the IMI concentration producing a 50% saturation of the signal (SC50) and linear range (SC10- SC90) were found to be 4.30 ng mL-1 and 0.47 - 21.37 ng mL-1 for IFE-IN, while 1.21 ng mL-1 and 0.07 - 10.21 ng mL-1 for MS-IN, respectively. Both IFE-IN and MS-IN achieved excellent accuracy for the detection of IMI in different matrices. The quantities of IMI in apple samples detected by IFE-IN and MS-IN were consistent with the high-performance liquid chromatography results. For IFE-IN, analyte competes with AuNPs-labeled-antigen to bind with the mAb-conjugated-UCNPs, which changes the fluorescence signal at 544 nm. For MS-IN, the immunocomplex of AuNPs-labeled-antigen and mAb-conjugated-MNPs dissociates in the presence of analyte, and the optical density of AuNPs-labeled-antigen at 525 nm increases with increasing analyte concentration after separation.

Synthesis and in vitro preliminary evaluation of prostate-specific membrane antigen targeted upconversion nanoparticles as a first step towards radio/fluorescence-guided surgery of prostate cancer

Over the last decade, upconversion nanoparticles (UCNP) have been widely investigated in nanomedicine due to their high potential as imaging agents in the near-infrared (NIR) optical window of biological tissues. Here, we successfully develop active targeted UCNP as potential probes for dual NIR-NIR fluorescence and radioactive-guided surgery of prostate-specific membrane antigen (PSMA)(+) prostate cancers. We designed a one-pot thermolysis synthesis method to obtain oleic acid-coated spherical NaYF4:Yb,Tm@NaYF4 core/shell UCNP with narrow particle size distribution (30.0 ± 0.1 nm, as estimated by SAXS analysis) and efficient upconversion luminescence. Polyethylene glycol (PEG) ligands bearing different anchoring groups (phosphate, bis- and tetra-phosphonate-based) were synthesized and used to hydrophilize the UCNP. DLS studies led to the selection of a tetra-phosphonate PEG(2000) ligand affording water-dispersible UCNP with sustained colloidal stability in several aqueous media. PSMA-targeting ligands (i.e., glutamate-urea-lysine derivatives called KuEs) and fluorescent or radiolabelled prosthetic groups were grafted onto the UCNP surface by strain-promoted azide-alkyne cycloaddition (SPAAC). These UCNP, coated with 10 or 100% surface density of KuE ligands, did not induce cytotoxicity over 24 h incubation in LNCaP-Luc or PC3-Luc prostate cancer cell lines or in human fibroblasts for any of the concentrations evaluated. Competitive binding assays and flow cytometry demonstrated the excellent affinity of UCNP@KuE for PSMA-positive LNCaP-Luc cells compared with non-targeted UCNP@CO2H. Furthermore, the binding of UCNP@KuE to prostate tumour cells was positively correlated with the surface density of PSMA-targeting ligands and maintained after 125I-radiolabelling. Finally, a preliminary biodistribution study in LNCaP-Luc-bearing mice demonstrated the radiochemical stability of non-targeted [125I]UCNP paving the way for future in vivo assessments.

Stable and Highly Efficient Antibody-Nanoparticles Conjugation

Functional ligands and polymers have frequently been used to yield target-specific bio-nanoconjugates. Herein, we provide a systematic insight into the effect of the chain length of poly(oligo (ethylene glycol) methyl ether acrylate) (POEGMEA) containing polyethylene glycol on the colloidal stability and antibody-conjugation efficiency of nanoparticles. We employed Reversible Addition-Fragmentation Chain Transfer (RAFT) to design diblock copolymers composed of 7 monoacryloxyethyl phosphate (MAEP) units and 6, 13, 35, or 55 OEGMEA units. We find that when the POEGMEA chain is short, the polymer cannot effectively stabilize the nanoparticles, and when the POEGMEA chain is long, the nanoparticles cannot be efficiently conjugated to antibody. In other words, the majority of the carboxylic groups in larger POEGMEA chains are inaccessible to further chemical modification. We demonstrate that the polymer containing 13 OEGMEA units can effectively bind up to 64% of the antibody molecules, while the binding efficiency drops to 50% and 0% for the polymer containing 35 and 55 OEGMEA units. Moreover, flow cytometry assay statistically shows that about 9% of the coupled antibody retained its activity to recognize B220 biomarkers on the B cells. This work suggests a library of stabile, specific, and bioactive lanthanide-doped nanoconjugates for flow cytometry and mass cytometry application.

Nanotransducers for Wireless Neuromodulation

Understanding the signal transmission and processing within the central nervous system (CNS) is a grand challenge in neuroscience. The past decade has witnessed significant advances in the development of new tools to address this challenge. Development of these new tools draws diverse expertise from genetics, materials science, electrical engineering, photonics and other disciplines. Among these tools, nanomaterials have emerged as a unique class of neural interfaces due to their small size, remote coupling and conversion of different energy modalities, various delivery methods, and mitigated chronic immune responses. In this review, we will discuss recent advances in nanotransducers to modulate and interface with the neural system without physical wires. Nanotransducers work collectively to modulate brain activity through optogenetic, mechanical, thermal, electrical and chemical modalities. We will compare important parameters among these techniques including the invasiveness, spatiotemporal precision, cell-type specificity, brain penetration, and translation to large animals and humans. Important areas for future research include a better understanding of the nanomaterials-brain interface, integration of sensing capability for bidirectional closed-loop neuromodulation, and genetically engineered functional materials for cell-type specific neuromodulation.

Oligonucleotide sensor based on magnetic capture and photoligation of upconverting nanoparticles in solid surfaces

In this work, we present a luminescence platform that can be used as point of care system for determining the presence and concentration of specific oligonucleotide sequences. This sensor exhibited a limit of detection as low as 50 fM by means of: (i) the use of single-stranded DNA (ssDNA) functionalized magnetic microparticles that captured and concentrated ssDNA-upconverting nanoparticles (ssDNA-UCNPs) on a solid support, when the target sequence (miR-21-5p DNA-analogue) was in the sample, and (ii) a photoligation reaction that covalently linked the ssDNA-UCNPs and the ssDNA magnetic microparticles, allowing stringent washes. The presented sensor showed a similar limit of detection when the assays were conducted in samples containing total miRNA extracted from human serum, demonstrating its suitability for detecting small specific oligonucleotide sequences under real-like conditions. The strategy of combining UCNPs, magnetic microparticles, and a photoligation reaction provides new insight into low-cost, rapid, and ultra-sensitive detection of oligonucleotide sequences.

Positive role of the long luminescence lifetime of upconversion nanophosphors on resonant surfaces for ultra-compact filter-free bio-assays

We introduce a compact array fluorescence sensor principle that takes advantage of the long luminescence lifetimes of upconversion nanoparticles (UCNPs) to deploy a filter-free, optics-less contact geometry, advantageous for modern biochemical assays of biomolecules, pollutants or cells. Based on technologically mature CMOS chips for ∼10 kHz technical/scientific imaging, we propose a contact geometry between assayed molecules or cells and a CMOS chip that makes use of only a faceplate or direct contact, employing time-window management to reject the 975 nm excitation light of highly efficient UCNPs. The chip surface is intended to implement, in future devices, a resonant waveguide grating (RWG) to enhance excitation efficiency, aiming at the improvement of upconversion luminescence emission intensity of UCNP deposited atop of such an RWG structure. Based on mock-up experiments that assess the actual chip rejection performance, we bracket the photometric figures of merit of such a promising chip principle and predict a limit of detection around 10-100 nanoparticles.

Circularly polarized lanthanide luminescence for advanced security inks

Authenticating products and documents with security inks is vital to global commerce, security and health. Lanthanide complexes are widely used in luminescent security inks owing to their unique and robust photophysical properties. Lanthanide complexes can also be engineered to undergo circularly polarized luminescence (CPL), which encodes chiral molecular fingerprints in luminescence spectra that cannot be decoded by conventional optical measurements. However, chiral CPL signals have not yet been exploited as an extra security layer in advanced security inks. This Review introduces CPL and related concepts that are necessary to appreciate the challenges and potential of lanthanide-based, CPL-active security inks. We describe recent advances in CPL analysis and read-out technologies that have expedited CPL-active security ink applications. Further, we provide a systematic meta-analysis of strongly CPL-active Euⁱⁱⁱ, Tbⁱⁱⁱ, Smⁱⁱⁱ, Ybⁱⁱⁱ, Cmⁱⁱⁱ, Dyⁱⁱⁱ and Crⁱⁱⁱ complexes, discussing the suitability of their photophysical properties and highlighting promising candidates. We conclude by providing key recommendations for the development and advancement of the field.

Time-resolved luminescence spectroscopy for monitoring the stability and dissolution behaviour of upconverting nanocrystals with different surface coatings

We demonstrate the potential of time-resolved luminescence spectroscopy for the straightforward assessment and in situ monitoring of the stability of upconversion nanocrystals (UCNPs). Therefore, we prepared hexagonal NaYF4:Yb3+,Er3+ UCNPs with various coatings with a focus on phosphonate ligands of different valency, using different ligand exchange procedures, and studied their dissolution behaviour in phosphate-buffered saline (PBS) dispersions at 20 °C and 37 °C with various analytical methods. The amount of the released UCNPs constituting fluoride ions was quantified by potentiometry using a fluoride ion-sensitive electrode and particle disintegration was confirmed by transmission electron microscopy studies of the differently aged UCNPs. In parallel, the luminescence features of the UCNPs were measured with special emphasis on the lifetime of the sensitizer emission to demonstrate its suitability as screening parameter for UCNP stability and changes in particle composition. The excellent correlation between the changes in luminescence lifetime and fluoride concentration highlights the potential of our luminescence lifetime method for UCNP stability screening and thereby indirect monitoring of the release of potentially hazardous fluoride ions during uptake and dissolution in biological systems. Additionally, the developed in situ optical method was used to distinguish the dissolution dynamics of differently sized and differently coated UCNPs.

808 nm-activable core@multishell upconverting nanoparticles with enhanced stability for efficient photodynamic therapy

BACKGROUND

The unique upconversion properties of rare-earth-doped nanoparticles offers exciting opportunities for biomedical applications, in which near-IR remote activation of biological processes is desired, including in vivo bioimaging, optogenetics, and light-based therapies. Tuning of upconversion in purposely designed core-shell nanoparticles gives access to biological windows in biological tissue. In recent years there have been several reports on NIR-excitable upconverting nanoparticles capable of working in biological mixtures and cellular settings. Unfortunately, most of these nanosystems are based on ytterbium's upconversion at 980 nm, concurrent with water's absorption within the first biological window. Thus, methods to produce robust upconverting nanoplatforms that can be efficiently excited with other than 980 nm NIR sources, such as 808 nm and 1064 nm, are required for biomedical applications.

RESULTS

Herein, we report a synthetic method to produce aqueous stable upconverting nanoparticles that can be activated with 808 nm excitation sources, thus avoiding unwanted heating processes due to water absorbance at 980 nm. Importantly, these nanoparticles, once transferred to an aqueous environment using an amphiphilic polymer, remain colloidally stable for long periods of time in relevant biological media, while keeping their photoluminescence properties. The selected polymer was covalently modified by click chemistry with two FDA-approved photosensitizers (Rose Bengal and Chlorin e6), which can be efficiently and simultaneously excited by the light emission of our upconverting nanoparticles. Thus, our polymer-functionalization strategy allows producing an 808 nm-activable photodynamic nanoplatform. These upconverting nanocomposites are preferentially stored in acidic lysosomal compartments, which does not negatively affect their performance as photodynamic agents. Upon 808 nm excitation, the production of reactive oxidative species (ROS) and their effect in mitochondrial integrity were demonstrated.

CONCLUSIONS

In summary, we have demonstrated the feasibility of using photosensitizer-polymer-modified upconverting nanoplatforms that can be activated by 808 nm light excitation sources for application in photodynamic therapy. Our nanoplatforms remain photoactive after internalization by living cells, allowing for 808 nm-activated ROS generation. The versatility of our polymer-stabilization strategy promises a straightforward access to other derivatizations (for instance, by integrating other photosensitizers or homing ligands), which could synergistically operate as multifunctional photodynamic platforms nanoreactors for in vivo applications.

Photophysical Properties of Upconverting Nanoparticle-Phthalocyanine Complexes

Interaction between upconverting nanoparticles and aluminum octacarboxyphthalocyanine was studied. The efficiency of non-radiative energy transfer from the nanoparticles to phthalocyanine increased with the number of phthalocyanine molecules adsorbed on the nanoparticle, but only up to a certain limit. Further increase in the phthalocyanine concentration resulted in a decrease of its sensitized fluorescence due to the dimerization of dye molecules on the nanoparticle surface. When subjected to infrared irradiation, phthalocyanine molecules in the hybrid complex generated singlet oxygen. The observed effects are of interest in regard to the targeted search for new components of efficient third-generation hybrid photosensitizers.

Selective cellular imaging with lanthanide-based upconversion nanoparticles

Upconversion nanoparticles (UCNPs) with sodium yttrium fluoride, NaYF4 (host lattice) doped with Yb3+ (sensitizer) and Er3+ (activator) were synthesized via hydrothermal route incorporating polyethyleneimine (PEI) for their long-term stability in water. The cationic PEI-modified UCNPs with diameter 20 ± 4 nm showed a zeta potential value of +36.5 mV and showed an intense, visible red luminescence and low-intensity green emission with 976 nm laser excitation. The particles proven to be nontoxic to endothelial cells, with a 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay, showing 90% to 100% cell viability, across a wide range of UCNP concentrations (0.3 ng/mL-0.3 mg/mL) were used in multiphoton imaging. Multiphoton cellular imaging and emission spectroscopy data reported here prove that the UCNPs dispersed in cell culture media are predominantly concentrated in the cytoplasm than the cell nucleus. The energy transfer from PEI-coated UCNPs to surrounding media for red luminescence in the biological system is also highlighted with spectroscopic measurements. Results of this study propose that UCNPs can, therefore, be used for cytoplasm selective imaging together with multiphoton dyes (eg, 4',6-diamidino-2-phenylindole (DAPI)) that are selective to cell nucleus.

Energy Transfer between Tm-Doped Upconverting Nanoparticles and a Small Organic Dye with Large Stokes Shift

Lanthanide-doped upconverting nanoparticles (UCNP) are being extensively studied for bioapplications due to their unique photoluminescence properties and low toxicity. Interest in RET applications involving UCNP is also increasing, but due to factors such as large sizes, ion emission distributions within the particles, and complicated energy transfer processes within the UCNP, there are still many questions to be answered. In this study, four types of core and core-shell NaYF₄-based UCNP co-doped with Yb3+ and Tm3+ as sensitizer and activator, respectively, were investigated as donors for the Methyl 5-(8-decanoylbenzo[1,2-d:4,5-d']bis([1,3]dioxole)-4-yl)-5-oxopentanoate (DBD-6) dye. The possibility of resonance energy transfer (RET) between UCNP and the DBD-6 attached to their surface was demonstrated based on the comparison of luminescence intensities, band ratios, and decay kinetics. The architecture of UCNP influenced both the luminescence properties and the energy transfer to the dye: UCNP with an inert shell were the brightest, but their RET efficiency was the lowest (17%). Nanoparticles with Tm3+ only in the shell have revealed the highest RET efficiencies (up to 51%) despite the compromised luminescence due to surface quenching.

Heterogeneous growth of palladium nanocrystals on upconversion nanoparticles for multimodal imaging and photothermal therapy

Based on the heterogeneous growth of nano-palladium on UCNPs, a new kind of nanocomposite was developed that can be used for dual-imaging guided photothermal therapy. This smart strategy provides new insights for future development of materials based on the multicomponent nanocomposites.