Low-temperature synthesis and investigation into the formation mechanism of high quality Ni-Fe layered double hydroxides hexagonal platelets

Efficient Dye Degradation and Antimicrobial Behavior with Molecular Docking Performance of Silver and Polyvinylpyrrolidone-Doped Zn-Fe Layered Double Hydroxide

Zn-Fe layered double hydroxide (LDH) was synthesized through the low-temperature-based coprecipitation method. Various concentrations of Ag (1, 3, and 5 wt %) with a fixed amount (5 wt %) of polyvinylpyrrolidone (PVP) were doped into LDH nanocomposites. This research aims to improve the bactericidal properties and catalytic activities of doping-dependent nanocomposites. Adding Ag and PVP to LDH enhanced oxygen vacancies, which increased the amount of hydroxide adsorption sites and the number of active sites. The doped LDH was employed to degrade rhodamine-B dye in the presence of a reducing agent (NaBH4), and the obtained results showed maximum dye degradation in a basic medium compared to acidic and neutral. The bactericidal efficacy of doped Zn-Fe (5 wt %) showed a considerably greater inhibition zone of 3.65 mm against Gram-negative (G-ve) or Escherichia coli (E. coli). Furthermore, molecular docking was used to decipher the mystery behind the microbicidal action of Ag-doped PVP/Zn-Fe LDH and to propose an inhibition mechanism of β-ketoacyl-acyl carrier protein synthase IIE. coli (FabH) and deoxyribonucleic acid gyrase E. coli behind in vitro results.

Synthesis of NiFe-layered double hydroxides using triethanolamine-complexed precursors as oxygen evolution reaction catalysts: effects of Fe valence

The synthesis of highly efficient NiFe-layered double hydroxides (NiFe-LDHs) to catalyze the oxygen evolution reaction (OER) is urgent and challenging. Herein, NiFe-FeCl3-x and NiFe-FeCl2-x samples (where FeCl3 and FeCl2 represent the Fe sources and x represents the imposed reaction time: 6, 12, and 24 h) were prepared via one-pot hydrothermal synthesis using Fe sources characterized by Fe(III) or Fe(II) valence states. In the presence of triethanolamine, when FeCl3 was used as the Fe source, pure NiFe-LDH was obtained, whose crystallinity increased with increasing hydrothermal treatment time. In contrast, when FeCl2 was used as the Fe source, a mixture of NiFe-LDH, Fe2O3, and trace amounts of Fe3O4 was obtained. The content of NiFe-LDH in the mixture increased under longer hydrothermal treatment and NiFe-FeCl3-x catalysts exhibited better OER performance than NiFe-FeCl2-x catalysts. Specifically, NiFe-FeCl3-6 afforded the highest OER performance with an overpotential of 246.8 mV at 10 mA cm-2 and a Tafel slope of 46.1 mV dec-1. Herein, we investigated the effects of the valence state of Fe precursors on the structures and OER activities of the prepared catalysts; the mechanism of NiFe-LDH formation via hydrothermal synthesis in the presence of triethanolamine was also proposed.

Alginate Microbeads Containing Halloysite and Layered Double Hydroxide as Efficient Carriers of Natural Antimicrobials

The present paper describes the preparation and characterization of novel microbeads from alginate filled with nanoclay such as halloysite nanotubes (HNTs). HNTs were used as support for the growth of layered double hydroxide (LDH) crystals producing a flower-like structure (HNT@LDH). Such nanofiller was loaded with grapefruit seed oil (GO), an active compound with antimicrobial activity, up to 50% wt. For comparison, the beads were also loaded with HNT and LDH separately, and filled with the same amount of GO. The characterization of the filler was performed using XRD and ATR spectroscopy. The beads were analyzed through XRD, TGA, ATR and SEM. The functional properties of the beads, as nanocarriers of the active compound, were investigated using UV-vis spectroscopy. The release kinetics were recorded and modelled as a function of the structural characteristics of the nanofiller.

Machine learning-assisted optimization of multi-metal hydroxide electrocatalysts for overall water splitting

Green hydrogen produced via electrochemical water splitting is a suitable candidate to replace emission-intensive fuels. However, the successful widespread adoption of green hydrogen is contingent on the development of low-cost, earth-abundant catalysts. Herein, machine learning models built on experimental data were used to optimize the precursor ratios of hydroxide-based electrocatalysts, with the objective of improving the product's electrocatalytic performance for overall water splitting. The Neural Network-based models were found to be the most effective in predicting and minimizing the overpotentials of the catalysts, reaching a minimum in two iterations. The relatively mild reaction conditions of the synthesis procedure, coupled with its scalability demonstrated herein, renders the optimized catalyst relevant for industrial implementation in the future. The optimized catalyst, characterized to be a molybdate-intercalated CoFe LDH, demonstrated overpotentials of 266 and 272 mV at 10 mA cm-2 for oxygen and hydrogen evolution reactions respectively in alkaline electrolyte, alongside unwavering stability for overall water splitting over 50 h. Overall, our results reflect the efficacy and advantages of machine learning strategies to alleviate the time and labour-intensive nature of experimental optimizations, which can greatly accelerate electrocatalysts research.

Chitosan-gelatin hydrogel incorporating polyvinyl alcohol and MnFe double-layered hydroxide nanocomposites with biological activity

In this research, a novel nanocomposite scaffold was developed based on a natural chitosan-gelatin (CS-Ge) hydrogel by incorporating synthetic polyvinyl alcohol (PVA) and MnFe layered double hydroxides (LDHs). The CS-Ge/PVP/MnFe LDH nanocomposite hydrogels was characterized using Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Field Emission Scanning Electron Microscope (FE-SEM), Energy Dispersive X-Ray (EDX), vibrating-sample magnetometer (VSM), and Thermal gravimetric analysis (TGA). The biological tests conducted showed cell viability of the healthy cell line exceeding 95 % after 48 and 72 h. Additionally, the nanocomposite demonstrated high antibacterial activity against P. aeruginosa bacteria biofilm, as confirmed through Anti-biofilm assays. Furthermore, mechanical tests revealed that the storage modulus was greater than the loss modulus (G'/G" > 1), confirming the appropriate elastic state of the nanocomposite.

Low-Temperature Chemical Bath Deposition of Conformal and Compact NiOX for Scalable and Efficient Perovskite Solar Modules

A scalable and low-cost deposition of high-quality charge transport layers and photoactive perovskite layers are the grand challenges for large-area and efficient perovskite solar modules and tandem cells. An inverted structure with an inorganic hole transport layer is expected for long-term stability. Among various hole transport materials, nickel oxide has been investigated for highly efficient and stable perovskite solar cells. However, the reported deposition methods are either difficult for large-scale conformal deposition or require a high vacuum process. Chemical bath deposition is supposed to realize a uniform, conformal, and scalable coating by a solution process. However, the conventional chemical bath deposition requires a high annealing temperature of over 400 °C. In this work, an amino-alcohol ligand-based controllable release and deposition of NiOX using chemical bath deposition with a low calcining temperature of 270 °C is developed. The uniform and conformal in-situ growth precursive films can be adjusted by tuning the ligand structure. The inverted structured perovskite solar cells and large-area solar modules reached a champion PCE of 22.03% and 19.03%, respectively. This study paves an efficient, low-temperature, and scalable chemical bath deposition route for large-area NiOX thin films for the scalable fabrication of highly efficient perovskite solar modules.

Photocatalytic transfer of aqueous nitrogen into ammonia using nickel-titanium-layered double hydroxide

The development of solar-driven transfer of atmospheric nitrogen into ammonia is one of the green and sustainable strategies in industrial ammonia production. Nickel-titanium-layered double hydroxide (NiTi-LDH) was synthesised using the soft-chemical process for atmospheric nitrogen fixation application under photocatalysis in an aqueous system. NiTi-LDH was investigated using advanced characterisation techniques and confirmed the potential oxygen vacancies and/or surface defects owing to better photocatalytic activity under the solar spectrum. It also exhibited a bandgap of 2.8 eV that revealed its promising visible-light catalytic activities. A maximum of 33.52 µmol L-1 aqueous NH3 was obtained by continuous nitrogen (99.9% purity) supply into the photoreactor under an LED light source. Atmospheric nitrogen supply (≈78%) yielded 14.67 µmol L-1 aqueous NH3 within 60 min but gradually reduced to 3.6 µmol L-1 at 330 min. Interestingly, in weak acidic pH, 20.90 µmol L-1 NH3 was produced compared to 11.51 µmol L-1 NH3 in basic pH. The application of NiTi-LDH for visible-light harvesting capability and photoreduction of atmospheric N2 into NH3 thereby opens a new horizon of eco-friendly NH3 production using natural sunlight as alternative driving energy.

Intelligent Chip-Controlled Smart Oxygen Electrodes for Constructing Rechargeable Zinc-Air Batteries with Excellent Energy Efficiency and Durability

High-performance rechargeable oxygen electrodes are key devices for realizing high-specific-energy batteries, including zinc-air and lithium-air batteries. However, these batteries have severe problems of premature decay in energy efficiency by serious corrosion, wide charge-discharge gap, and catalyst peeling off. Herein, we propose a "smart dual-oxygen electrode", which is composed of an intelligent switch control module + heterostructured Fe₁Ni₃-LDH/PNCNF OER catalysis electrode layer + ion conductive | electronic insulating membrane + Pt/C ORR catalysis electrode layer, where OER and ORR layers are automatically switched by the intelligent switch control module as required. This smart dual-oxygen electrode offers an ultralow energy efficiency decay rate of 0.0067% after 300 cycles during cycling, much lower than that of the commercial Pt/C electrode (1.82%). The assembled rechargeable zinc-air battery (RZAB) displays a super narrow voltage gap and achieves a high energy efficiency of 71.7%, far higher than that of the existing RZABs (about 50%). Therefore, this strategy provides a complete solution for designing various high-performance metal-air secondary batteries.

Demonstrating the source of inherent instability in NiFe LDH-based OER electrocatalysts

Nickel-iron layered double hydroxides are known to be one of the most highly active catalysts for the oxygen evolution reaction in alkaline conditions. The high electrocatalytic activity of the material however cannot be sustained within the active voltage window on timescales consistent with commercial requirements. The goal of this work is to identify and prove the source of inherent catalyst instability by tracking changes in the material during OER activity. By combining in situ and ex situ Raman analyses we elucidate long-term effects on the catalyst performance from a changing crystallographic phase. In particular, we attribute electrochemically stimulated compositional degradation at active sites as the principal cause of the sharp loss of activity from NiFe LDHs shortly after the alkaline cell is turned on. EDX, XPS, and EELS analyses performed after OER also reveal noticeable leaching of Fe metals compared to Ni, principally from highly active edge sites. In addition, post-cycle analysis identified a ferrihydrite by-product formed from the leached Fe. Density functional theory calculations shed light on the thermodynamic driving force for the leaching of Fe metals and propose a dissolution pathway which involves [FeO₄]^2- removal at relevant OER potentials.

NiFe-Layered Double Hydroxides/Lead-free Cs2AgBiBr6 Perovskite 2D/2D Heterojunction for Photocatalytic CO2 Conversion

Designing of heterojunction photocatalysts with appropriate interfacial contact plays crucial roles in enhancing the interfacial charge transfer/separation. A two-dimensional (2D)/2D face-to-face heterojunction is an ideal option since this architecture with a large contact area can provide abundant reactive centers and promote the interfacial charge transfer/separation between layers. Herein, a novel 2D/2D heterojunction of NiFe-layered double hydroxides (NiFe-LDH)/Cs₂AgBiBr₆ (CABB) was fabricated by electrostatic self-assembly of NiFe-LDH and CABB nanosheets. This unique 2D/2D architecture endowed NiFe-LDH/CABB with a large contact area and a short charge transport distance, assuring remarkable interfacial charge transfer/separation rates. As a result, the 2D/2D NiFe-LDH/CABB heterojunction exhibited significant improvement in photocatalytic CO₂ reduction under visible light than the pristine counterparts. Based on density functional theory calculations and various characterizations, a step scheme charge-transfer mechanism was proposed. This investigation sheds light on the designing and manufacturing of highly efficient 2D/2D heterostructure photocatalysts for artificial photosynthesis.

Triethanolamine-assisted synthesis of NiFe layered double hydroxide ultrathin nanosheets for efficient oxygen evolution reaction

Water electrolysis is a promising technique for producing high-quality hydrogen, the application of which is impeded by the sluggish oxygen evolution reaction (OER) process. In this study, ultrathin nickel-iron layered double hydroxide (NiFe LDH) nanosheets were successfully synthesized through a facile hydrothermal reaction with the assistance of triethanolamine (TEA). Morphological and structural characterizations revealed that the presence of TEA modified the morphology of NiFe LDH, facilitated the synthesis of high-purity NiFe LDH, improved the crystallinity of NiFe LDH and resulted in a slight decrease in specific surface area. X-ray photoelectron spectroscopy (XPS) analysis demonstrated the modulation of the electronic structure engendered by the addition of TEA, with nickel and iron appearing in high valence state in the resulting NiFe LDH nanosheets. The as-prepared NiFe LDH nanosheets possessed outstanding OER activity with fast kinetics, exhibiting a low overpotential of 261 mV to achieve a current density of 10 mA cm-2 and a small Tafel slope of 32.5 mV dec-1 in 1 M KOH. The excellent OER performance and rapid OER kinetics are mainly attributed to the high-valence Ni and Fe rather than the modification in the morphology and microstructure.

Influence of Fe-clustering on the water oxidation performance of two-dimensional layered double hydroxides

Among the two-dimensional (2D) materials family, layered double hydroxides (LDHs) represent a key member due to their unparalleled chemical versatility. In particular, Fe-based LDHs are distinguished candidates due to their high efficiency as oxygen evolution reaction (OER) electrocatalysts. Herein, we have selected MgFe-based LDH phases as model systems in order to decipher whether Fe-clustering exerts an effect on the OER performance. For that, we have optimized hydrothermal synthesis by using triethanolamine (TEA) as the chelating agent. The magnetic characterisation allows us to identify the Fe-clustering degree by following both magnetic susceptibility as well as magnetization values at 2 K. Thanks to this, we demonstrated that TEA induces an increment in Fe-clustering. Electrochemical OER measurements show that both samples behave identically by using glassy carbon electrodes. Interestingly, when the samples are tested in the most commonly employed electrode, nickel foam, striking differences arise. The sample exhibiting a lower Fe-clustering behaves as a better electrocatalyst with a reduction of the overpotential values of more than 50 mV to reach 100 mA cm^-2, as a consequence of a favoured surface transformation of MgFe-LDHs phases into more reactive oxyhydroxide NiFe-based phases during the electrochemical tests. Hence, this work alerts about the importance of the electrocatalyst-electrode collector interactions which can induce misinterpretations in the OER performance.

Nickel-Iron Layered Double Hydroxide Dispersions in Ethanol Stabilized by Acetate Anions

This work reports a method to obtain stable dispersions of nickel-iron layered double hydroxide (NiFe-LDH) nanosheets in ethanol by exposing the as-synthetized bulk NiFe-LDH to a sodium acetate solution or by adding acetate and citrate anions inside the reaction mixture. In the case of citrate-containing NiFe-LDH, the formation of single-layer nanosheets is confirmed by X-ray diffraction and atomic force microscopy measurements. Lastly, the effect of acetate ions on the electrocatalytic activity of NiFe-LDH is discussed for the oxygen evolution reaction. Our results provide useful information to improve the existing LDH exfoliation routes based on the use of green solvent alternatives to the mostly used formamide.

Innovative in situ remediation of mine waters using a layered double hydroxide-biochar composite

The current demand for alternative water sources requires the incorporation of low-cost composites in remediation technologies. These represent a sustainable alternative to more expensive, commercially used adsorbents. The main objective of this comprehensive field-scale study was to incorporate the layered double hydroxides (LDHs) into the hybrid biochar-based composites and apply an innovative material to remediate As/Sb-rich mine waters. The presence of hydrous Fe oxides (HFOs) within the composite enhanced the total adsorption efficiency of the composite for As(V) and Sb(V). The kinetic data fitted a pseudo-second order model. Equilibrium experiments confirmed that the composite had a stronger interaction with As(V) than with Sb(V). The efficient removal of As(V) from mine water was achieved in both batch and continuous flow column systems, reaching up to 98% and 80%, respectively. Sb(V) showed different behavior to As(V) during mine water treatment, reaching adsorption efficiencies of up to 39% and 26% in batch and column experiments, respectively. The migration of Sb(V) in mine water was mostly attributed to its dispersion before it was able to show affinity to the composite. In general, the proposed column technology is suitable for the field remediation of small volumes of contaminated water, and thus has significant commercial potential.

Removal of Cu2+ metal ions from water using Mg-Fe layered double hydroxide and Mg-Fe LDH/5-(3-nitrophenyllazo)-6-aminouracil nanocomposite for enhancing adsorption properties

Herein, a new adsorbent was prepared by modifying Mg-Fe LDH for the removal of Cu²⁺ metal ions from wastewater. Mg-Fe LDH with 5-(3-nitrophenyllazo)-6-aminouracil ligand has been successfully prepared using direct co-precipitation methods and was fully characterized using FTIR analysis, X-ray diffraction, BET surface area theory, zeta potential, partial size, TGA/DTA, CHN, EDX, FESEM, and HRTEM. The surface areas of Mg-Fe LDH and Mg-Fe LDH/ligand were 73.9 m²/g and 34.7 m²/g respectively. Moreover, Cu²⁺ adsorption on LDH surfaces was intensively examined by adjusting different parameters like time, adsorbent dosage, pH, and Cu²⁺ metal ion concentration. Several isotherm and kinetic models were investigated to understand the mechanism of adsorption towards Cu²⁺ metal ions. Adsorption capacity values of LDH and ligand-LDH rounded about 165 and 425 mg/g respectively, applying nonlinear fitting of Freundlich and Langmuir isotherm equations showing that the ligand-LDH can be considered a potential material to produce efficient adsorbent for removal of heavy metal from polluted water. The adsorption of Cu²⁺ metal ions followed a mixed 1,2-order mechanism. The isoelectric point (PZC) of the prepared sample was investigated and discussed. The effect of coexisting cations on the removal efficiency of Cu²⁺ ions shows a minor decrease in the adsorption efficiency. Recyclability and chemical stability of these adsorbents show that using Mg-Fe LDH/ligand has an efficiency removal for Cu²⁺ ions higher than Mg-Fe LDH through seven adsorption/desorption cycles. Moreover, the recycling of the Cu²⁺ ions was tested using cyclic voltammetry technique from a neutral medium, and the Cu²⁺ ion recovery was 68%.

Growth Dynamics of Vertical and Lateral Layered Double Hydroxide Nanosheets during Electrodeposition

Layered double hydroxides (LDHs) are a class of lamellar materials with a wide range of potential catalytic applications. LDHs form from positively charged 2D atomic layers separated by charge-balancing anions and solvent molecules. Typically, nanoscale LDH sheets can grow vertical or parallel to a substrate, exposing their different active facets. These two growth modes of LDH nanosheets have a significant impact on their electrocatalytic properties, yet the details of their growth remain unknown, hindering our ability to design and synthesize high-performance LDH-based electrocatalysts. Here, we investigate the growth pathways of LDH nanosheets using in situ electrochemical liquid-phase transmission electron microscopy (TEM) and show that the growth modes of LDH nanosheets can be controlled by tuning the precursor concentrations. Moreover, our observations reveal that LDH nanosheets grow via two pathways: (1) monomer addition, where the adatoms are heterogeneously deposited onto the LDH nanosheets, and (2) coalescence, where adjacent nanosheets merge together.

Granular Mg-Fe layered double hydroxide prepared using dual polymers: Insights into synergistic removal of As(III) and As(V)

Controlling the particle size and aggregation of nanosheet layers in layered double hydroxides (LDHs) is critical for their application. Herein, we report the preparation of Mg-Fe LDH through a co-precipitation method. The LDH was embedded using polyacrylamide (PAM) and polyvinyl alcohol (PVA; the LDH was designated as PAM/PVA-LDH) for As(III) and As(V) removal. We found that doping with 0.3 mL PVA (2 g L^-1) and 0.4 mL (20 g L^-1) PAM solution delaminated the nanosheet layers of 1 g of the LDH (PAM₄₀/PVA₃₀-LDH) and restructured the crystal phase from monoclinic to orthorhombic. This increased the surface area and pore volume. Furthermore, PAM₄₀/PVA₃₀-LDH exhibited higher affinity for As(III) and As(V) removal with maximum adsorption capacities of 14.1 and 22.8 mg g^-1, respectively, compared to LDH alone with adsorption capacities of 7.1 and 7.9 mg g^-1, respectively. It was found that the highest adsorption capacities of As(III) and As(V) using PAM₄₀/PVA₃₀-LDH occurred at pH ∼7 and pH 2.5, respectively. X-ray photoelectron spectroscopy analysis revealed that the removal of As(III) and As(V) on PAM₄₀/PVA₃₀-LDH was mainly attributable to ion exchange with intercalated SO₄^2-, hydrogen bonding, and complexation mechanisms. These findings illustrate that PAM₄₀/PVA₃₀-LDH would be an excellent adsorbent for the remediation of arsenic-polluted wastewater.

Topochemical synthesis of low-dimensional nanomaterials

Over the past several decades, nanomaterials have been extensively studied owing to having a series of unique physical and chemical properties that exceed those of conventional bulk materials. Researchers have developed a lot of strategies for the synthesis of low-dimensional nanomaterials. Among them, topochemical synthesis has attracted increasing attention because it can provide more new nanomaterials by improving and upgrading inexpensive and accessible nanomaterials. In this review, we summarize and analyze many existing topochemical synthesis methods, including selective etching, liquid phase reactions, high-temperature atmosphere reactions, electrochemically assisted methods, etc. The future direction of topochemical synthesis is also proposed.

Effect of LDHs and Other Clays on Polymer Composite in Adsorptive Removal of Contaminants: A Review

Recently, the development of a unique class of layered silicate nanomaterials has attracted considerable interest for treatment of wastewater. Clean water is an essential commodity for healthier life, agriculture and a safe environment at large. Layered double hydroxides (LDHs) and other clay hybrids are emerging as potential nanostructured adsorbents for water purification. These LDH hybrids are referred to as hydrotalcite-based materials or anionic clays and promising multifunctional two-dimensional (2D) nanomaterials. They are used in many applications including photocatalysis, energy storage, nanocomposites, adsorption, diffusion and water purification. The adsorption and diffusion capacities of various toxic contaminants heavy metal ions and dyes on different unmodified and modified LDH-samples are discussed comparatively with other types of nanoclays acting as adsorbents. This review focuses on the preparation methods, comparison of adsorption and diffusion capacities of LDH-hybrids and other nanoclay materials for the treatment of various contaminants such as heavy metal ions and dyes.

Basicity and Electrolyte Composition Dependent Stability of Ni-Fe-S and Ni-Mo Electrodes during Water Splitting

Non-noble metal electro-catalysts for water splitting are highly desired when we are moving towards a society where green electrons are becoming abundantly available, offering clear prospects to make our society more sustainable. In this work, Ni-Fe-S is reported as a high performing anode material for the water splitting reaction, operating at low overpotentials and showing high apparent stability. Furthermore, Ni-Mo electrodes are developed on metallic foam substrates and optimized in terms of their performance. The Ni-Fe-S material as anode, combined and integrated with Ni-Mo as cathode in a cell configuration, splits water at 10 mA cm-2 and a potential of 1.55 V. Similar to previous reports, we confirm that Mo leaches from Ni-Mo/Ni foam electrodes. Cycling tests and ICP-AES measurements show that the stability of Ni-Fe-S is apparent, and that in reality S is leaching from the material as was already suggested in literature. We expand on this knowledge and show that the leaching of S is dependent on both pH and the cation used during electrocatalysis. Furthermore, we find that applying an oxidative potential is in truth stabilizing towards S and that the alkalinity causes leaching. S was furthermore mobile and found to segregate towards the surface. Finally, using too low pH values (11 and lower) result in the passivating hydroxide metal layers being destroyed and the Ni-Fe-S dissolving completely.

Role of Transition Metals in Layered Double Hydroxides for Differentiating the Oxygen Evolution and Nonenzymatic Glucose Sensing

Layered double hydroxides (LDH) belong to the class of two-dimensional materials having a wide variety of applications ranging from energy storage to catalysis. Often, these materials when used for nonenzymatic electrochemical glucose sensing tend to be interfering with oxygen evolution reaction (OER), resulting in overestimation of the glucose. Herein, to address this, NiFe-based LDH were selected because of their ability to vary the metal ratios. The synthesized LDH have been characterized using various spectroscopic and microscopic techniques. Among the LDH synthesized, Ni₄Fe-LDH have been able to differentiate the glucose oxidation potential and the onset potential of OER with minimum interference. The Ni₄Fe-LDH sensor shows a sensitivity of 20.43 μA mM^-1 cm^-2 in the linear range of 0-4 mM concentrations. To further enhance the sensitivity, composites of reduced graphene oxide (rGO) have been synthesized in situ, and the Ni₄Fe/rGO₅ composites have shown an increased sensitivity of 176.8 μA mM^-1 cm^-2 attributed to the charge-transfer interactions. To understand the experimental observations, detailed computational studies have been carried out to study the effect of the electronic structure on the metal ratios of the LDH and its role in differentiating glucose sensing and the oxygen evolution reaction. Along with this, theoretical calculations are also carried out on LDH-graphene composites to study the charge-transfer interactions.