Selected Heavy Metals Removal From Electroplating Wastewater by Purified and Polyhydroxylbutyrate Functionalized Carbon Nanotubes Adsorbents

Optical Chemosensors Synthesis and Appplication for Trace Level Metal Ions Detection in Aqueous Media: A Review

In recent years, the development of optical chemosensors for the sensitive and selective detection of trace level metal ions in aqueous media has garnered significant attention within the scientific community. This review article provides a comprehensive overview of the synthesis strategies and applications of optical chemosensors dedicated to the detection of metal ions at low concentrations in water-based environments. The discussion encompasses a wide range of metal ions, including but not limited to heavy metals, transition metals, and rare earth elements, emphasizing their significance in environmental monitoring, industrial processes, and biological systems. The review explores into the synthesis methodologies employed for designing optical chemosensors, discovering diverse materials like organic dyes, nanoparticles, polymers, and hybrid materials. Special attention is given to the design principles that enable the selective recognition of specific metal ions, highlighting the role of ligand chemistry, coordination interactions, and structural modifications. Furthermore, the article thoroughly surveys the analytical performance of optical chemosensors in terms of sensitivity, selectivity, response time, and detection limits. Real-world applications, including water quality assessment, environmental monitoring, and biomedical diagnostics, are extensively covered to underscore the practical relevance of these sensing platforms. Additionally, the review sheds light on emerging trends, challenges, and future prospects in the field, providing insights into potential advancements and innovations. By synthesizing the current state of knowledge on optical chemosensors for trace level metal ions detection. The collective information presented herein not only offers a comprehensive understanding of the existing technologies but also inspires future research endeavors to address the evolving demands in the realm of trace metal ion detection.

Bio-derived carbon-based materials for sustainable environmental remediation and wastewater treatment

Biosynthesized nanocomposites, particularly those incorporating carbon-based materials, exhibit exceptional tunability and multifunctionality, surpassing the capabilities of conventional materials in these aspects. Developing practical solutions is critical to address environmental toxins from pharmaceuticals, heavy metals, pesticides, and dyes. Biomass waste is a readily available carbon source, which emerges as a promising material for producing biochar due to its inherent advantages: abundance, low cost, and environmentally friendly nature. This distribution mainly uses carbon-based materials (CBMs) and biomass waste in wastewater treatment. This review paper investigates several CBM types, including carbon aerogels, nanotubes, graphene, and activated carbon. The development of bio-derived carbon-based nanomaterials are discussed, along with the properties and composition of carbon materials derived from biomass waste and various cycles, such as photodegradation, adsorption, and high-level oxidation processes for natural remediation. In conclusion, this review examines the challenges associated with biochar utilization, including cost, recovery, and practical implementation.

Adsorption of Cd(II) ions on magnetic graphene oxide/cellulose modified with β-cyclodextrin: Analytical interpretation via statistical physics modeling and fractal like kinetic approach

In the present study, β-cyclodextrin modified magnetic graphene oxide/cellulose (CN/IGO/Cel) was fabricated for removal of Cd(II) ions. The material was characterized through various analytical techniques like FTIR, XRD, TGA/DTA, SEM, TEM, and XPS. The point of zero charge of the material was obtained as 5.38. The controllable factors were optimized by Taguchi design and optimum values were: adsorbent dose-16 mg, equilibrium time-40 min, and initial concentration of Cd(II) ions-40 mg/L. The material shows high adsorption capacity (303.98 mg/g). The good fitting of Langmuir model to adsorption data (R2 = 0.9918-0.9936) revealed the monolayer coverage on adsorbent surface. Statistical physics model M 2 showed best fitting to adsorption data (R2 > 0.997), suggesting the binding of Cd(II) ions occurred on two different receptor sites (n). Stereographically n > 1 confirming vertical multi-molecular mechanisms of Cd(II) ions adsorption on CN/IGO/Cel surface. The adsorption energies (E1 = 23.71-28.95 kJ/mol; E2 = 22.69-29.38 kJ/mol) concluded the involvement of physical forces for Cd(II) ions adsorption. Kinetic data fitted well to fractal-like pseudo first-order model (R2 > 0.9952), concluding the adsorption of Cd(II) ions occurred on energetically heterogeneous surface. The kinetic analysis shows that both the film-diffusion and pore-diffusion were responsible for Cd(II) ions uptake. XPS analysis was utilized to explain the adsorption mechanism of Cd(II) ions onto CN/IGO/Cel.

A Critical Review on the Recovery of Base and Critical Elements from Electronic Waste-Contaminated Streams Using Microbial Biotechnology

Pollution by end-of-life electronics is a rapid ever-increasing threat and is a universal concern with production of million metric tons of these wastes per annum. Electronic wastes (E-waste) are rejected electric or electronic equipment which have no other applications. The aggrandized unproper land filling of E-waste may generate hazardous effects on living organisms and ecosystem. At present, millions of tons of E-waste await the advancement of more efficient and worthwhile recycling techniques. Recovery of base and critical elements from electronic scraps will not only reduce the mining of these elements from natural resources but also reduces the contamination caused by the hazardous chemicals (mostly organic micropollutants) released from these wastes when unproperly disposed of. Bioleaching is reported to be the most eco-friendly process for metal recycling from spent electronic goods. A detailed investigation of microbial biodiversity and a molecular understanding of the metabolic pathways of bioleaching microorganisms will play a vital function in extraction of valuable minerals from the end-of-life scraps. Bioleaching technique as an economic and green technology costs around 7 USD per kg for effective reusing of E-waste as compared to other physical and chemical techniques. This review provides a summary of worldwide scenario of electronic pollutants; generation, composition and hazardous components of electronic waste; recycling of valuable elements through bioleaching; mechanism of bioleaching; microorganisms involved in base and critical element recovery from E-waste; commercial bioleaching operations; and upcoming aspects of this eco-friendly technique.

Adsorption/desorption of mercury (II) by artificially weathered microplastics: Kinetics, isotherms, and influencing factors

While both mercury (Hg) and microplastics (MPs) are well-studied global pollutants, comparatively little is known about the interactions between them and the mobilization of Hg from MPs into organisms. We examined the affinity of Hg(II) to artificially weathered MPs, including polyamide (w-PA), polyethylene (w-PE), polyethylene terephthalate (w-PET), polyester fibers (w-PEST), polyvinyl chloride (w-PVC), and polylactic acid (w-PLA), along with crumb rubber (CR) and PE collected from a wastewater treatment plant (WWTP-PE). WWTP-PE, CR, and w-PEST had particularly high Hg(II) affinities, which can be attributed to electrostatic interaction and pore filling. The adsorption followed a pseudo-second-order kinetic process and fitted the Freundlich model, suggesting multi-step (mass transfer and intraparticle diffusion) and heterogeneous adsorptions. Hydrochemical conditions (pH, dissolved organic matter (DOM), salinity and co-existent metal ions) all impacted Hg-MP behavior. Changes in Hg speciation and MP surface properties contributed to the different Hg(II) adsorption capacities for the MPs. Weathering of MPs generally increased the adsorption of Hg(II) onto MPs, but CR, PET and PEST did not follow this trend. Less than 3% of adsorbed Hg(II) was mobilized from the MPs in freshwater, but that increased up to 73% under simulated avian digestive conditions, suggesting increased bioavailability of Hg(II) from ingested MPs. Overall, weathered MPs adsorb and retain Hg(II) under environmentally relevant conditions but desorb much of it in simulated avian digestion fluid, suggesting that birds that ingest MPs may have increased Hg(II) exposure.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Enhancing the efficiency of Ni(II), Cd(II), and Cu(II) adsorption from aqueous solution using schist/alginate composite: batch and continuous studies

The main aim of this research is focused on the synthesis of schist/alginate composite (SC/AL) adsorbent and its utilization for the removal of Ni(II), Cu(II), and Cd(II) from waste streams using batch and column processes. The characterization of developed adsorbent was performed by X-ray fluorescence, X-ray diffraction, FTIR, and BET analyses. The most influential operating parameters (pH, contact time, temperature and initial adsorbate concentration) on the adsorption capacity of pollutants were examined to evaluate the performance of developed adsorbent. The kinetic and equilibrium adsorption results at pH 5.0 indicated that SC/AL composite had good adsorption capacity (qmax) for Ni(II), Cu(II), and Cd(II) estimated at 124.79 mg/g, 111.78 mg/g, and 119.78 mg/g, respectively. From the kinetic viewpoint, the good fit of pseudo-first-order kinetic model to the kinetic adsorption data indicated that dominant interaction of heavy metals with SC/AL composite was physisorption. The results of thermodynamic studies indicated that the adsorption of heavy metals onto SC/AL composite was endothermic and spontaneous in nature. The adsorption capacity of developed adsorbent could still reach relatively 85% of the original one after completing fifth cycle. Therefore, the reusability results of SC/AL composite were quite satisfied, making the developed adsorbent a commercially attractive and green method. Finally, in column studies, the effect of initial concentration of pollutants at pH 5.0 on the removal of heavy metal ions was investigated. The Thomas and Yoon-Nelson models provided a satisfactory explanation for the results of column data.

Removal of arsenic with functionalized multi-walled carbon nanotubes (MWCNTs-COOH) using the magnetic method (Fe3O4) from aqueous solutions

Heavy metals such as arsenic are one of the most important water pollutants and cause many environmental problems. One of the mechanisms for removing arsenic from aqueous media is the adsorption process. In this study, we investigated the efficiency of magnetized multi-walled carbon nanotubes with iron oxide (Fe3O4) nanoparticles. The precipitation method was used to synthesize Fe3O4 on PAC-(Fe3O4-f/MWCNTs) functionalized multi-walled carbon nanotubes. The effects of pH, contact time, amount of adsorbent, and contaminant concentration on the adsorption process were examined. Residual arsenic concentration was measured using induction chromatography and inductively coupled plasma mass spectrometry (ICP-MS). The physical and structural characteristics of the adsorbent were analyzed using XRD, TEM, FT-IR, TGA-DTA, BET, FESEM-EDS, Raman spectrum and X-ray. Optimal conditions for arsenic removal were pH = 2, As concentration = 6 mg L-1, and contact time = 30 minutes, using 0.02 g of adsorbent at room temperature. Also, fitting regression curves to the results showed that the Freundlich model (R2 > 0.9981) and a pseudo-second-order model (R2 = 1) best describe the isothermal and kinetic models of the adsorption process, respectively.

Adsorption of chromium from electroplating wastewater using activated carbon developed from water hyacinth

Industrial wastewater polluted with high concentrations of Cr is commonly discharged into water resources without proper treatment. This gives rise to the deterioration of water quality and imposes adverse effects on public health. Therefore, this study is aimed at removing Cr from electroplating wastewater using activated carbon produced from water hyacinth under a full factorial experimental design with three factors and three levels (pH,2,5 and 8, adsorbent dose 0.5,1and1.5 in 100 mL and contact time 30, 60 and120 min). A phosphoric acid solution of 37% was used to activate the carbon, which was then subjected to thermal decomposition for 15 min at 500 °C. The activated carbon was characterized by the presence of a high surface area (203.83 m²/g) of BET, cracking of adsorbent beads of SEM morphology, amorphous nature of XRD, and many functional groups of FTIR such as hydroxyl (3283 cm^-1), alkane (2920 cm^-1), nitrile (2114 cm^-1) and aromatics (1613 cm^-1). The minimum Cr adsorption performance of 15.6% was obtained whereas maximum removal of 90.4% was recorded at the experimental condition of pH 2, adsorbent dose of 1.5 g/100 mL, and contact time of 120 min at a fixed value of initial Cr concentration of 100 mg/L. Similarly, the maximum Cr removal from real electroplating wastewater was 81.2% at this optimum point. Langmuir's model best described the experimental value at R² 0.96 which implies the adsorption is chemically bonded, homogeneous, and monolayer. Pseudo-second-order model best fits with the experimental data with R² value of 0.99. The adsorbent was regenerated for seven cycles and the removal efficiency decreased from 93.25% to 21.35%. Finally, this technology is promising to be scaled up to an industrial level.

Fabrication and Characterization of Magnetic Cellulose-Chitosan-Alginate Composite Hydrogel Bead Bio-Sorbent

The implementation of inorganic adsorbents for the removal of heavy metals from industrial effluents generates secondary waste. Therefore, scientists and environmentalists are looking for environmentally friendly adsorbents isolated from biobased materials for the efficient removal of heavy metals from industrial effluents. This study aimed to fabricate and characterize an environmentally friendly composite bio-sorbent as an initiative toward greener environmental remediation technology. The properties of cellulose, chitosan, magnetite, and alginate were exploited to fabricate a composite hydrogel bead. The cross linking and encapsulation of cellulose, chitosan, alginate, and magnetite in hydrogel beads were successfully conducted through a facile method without any chemicals used during the synthesis. Energy-dispersive X-ray analysis verified the presence of element signals of N, Ca, and Fe on the surface of the composite bio-sorbents. The appearance and peak's shifting at 3330-3060 cm^-1 in the Fourier transform infrared spectroscopy analysis of the composite cellulose-magnetite-alginate, chitosan-magnetite-alginate, and cellulose-chitosan-magnetite-alginate suggested that there are overlaps of O-H and N-H and weak interaction of hydrogen bonding with the Fe₃O₄ particles. Material degradation, % mass loss, and thermal stability of the material and synthesized composite hydrogel beads were determined through thermogravimetric analysis. The onset temperature of the composite cellulose-magnetite-alginate, chitosan-magnetite-alginate, and cellulose-chitosan-magnetite-alginate hydrogel beads were observed to be lower compared to raw-material cellulose and chitosan, which could be due to the formation of weak hydrogen bonding resulting from the addition of magnetite Fe₃O₄. The higher mass residual of cellulose-magnetite-alginate (33.46%), chitosan-magnetite-alginate (37.09%), and cellulose-chitosan-magnetite-alginate (34.40%) compared to cellulose (10.94%) and chitosan (30.82%) after degradation at a temperature of 700 °C shows that the synthesized composite hydrogel beads possess better thermal stability, owing to the addition of magnetite and the encapsulation in the alginate hydrogel beads.

Comparative physicochemical analysis of galvanic sludge wastes

The paper provides the physicochemical analysis of galvanic sludge to determine the presence and concentration of toxic metals. Two sludges sampled from the same factory, but from different technological processes, alkaline galvanic sludge obtained from galvanizing process and acidic sludge generated from the chromium plating process were analyzed. Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES) revealed increased concentrations of toxic heavy metal ions Zn²⁺, Cr³⁺, Ni²⁺ and Pb²⁺ in the sludge from the galvanizing process and Cr³⁺, Cu²⁺, Ni²⁺, Pb²⁺, Cd²⁺ and Zn²⁺ from the chroming process. Moreover, the sludges were further physicochemically characterized by Reflectance Fourier Transform InfraRed Spectrometry (FTIR), Scanning Electron Microscopy with Energy-dispersive X-ray Spectroscopy Analysis (SEM-EDX) and X-ray diffraction (XRD). The results of ICP-OES were corroborated by FTIR. Analysis of FTIR spectra revealed the specific bands indicating the existence of metal oxides in the analyzed sludges, as well as the presence of organic substances, i.e. solvents and surfactants, used in the electroplating process. The analysis was accomplished following international norms and confirmed the increased concentrations of heavy metal ions from both sludges. In line with the regulations of the Environmental Protection Agency (EPA), the results proved the hypothesis that galvanic sludge is hazardous waste.

Divalent metal ion removal from simulated water using sustainable starch aerogels: Effect of crosslinking agent concentration and sorption conditions

This paper evaluates corn starch aerogels, studying different crosslinking agent (trisodium citrate) concentrations (1:1, 1:1.5, and 1:2) and sorption conditions (contact time, adsorbent weight, and initial concentration) regarding the potentially toxic elements (PTEs) [Cd(II) or Zn(II)] adsorption of the aqueous systems. Besides, other properties of aerogels, such as structural properties, specific surface area, and mechanical performance, were evaluated. For adsorption results, better values were observed in adsorption capacity and efficiency for the initial concentration of 100 ppm. In addition, an adsorption time of 12 h and an adsorbent weight of 3.0 g obtained better results due to the possible balance in this time and the high specific surface area available for Cd(II) adsorption. As for the type of adsorbent, the Aero 1:1.5 sample (intermediate crosslinking agent concentration) obtained better results, possibly due to the high porosity, smaller pore sizes, high pore density, and high specific surface area (198 m²·g^-1). In addition, hydroxyl groups in the starch aerogel removed Cd(II) ions with 30 % adsorption efficiency. Lastly, Aero 1:1.5 obtained a high mechanical strength at compression and a satisfactory compressive modulus. In contrast, starch aerogels did not absorb the Zn(II) ion.

Adsorptive removal of Cd2+ ions using dolochar at an industrial-scale process optimization by response surface methodology

In this work, performance of laboratory-synthesized dolochar has been investigated for adsorption of Cd²⁺ ions in a large-scale process with the application of Aspen Adsorption. Moreover, the optimum values of the operating parameters (namely, flow rate, bed height, and inlet metal ion concentration) that would result into maximum amount of cadmium ion adsorption (high exhaustion capacity) in minimum time (less exhaustion time) for a fixed mass of dolochar have been calculated via the application of response surface methodology. It was found that, at optimum values of bed height (3.48 m), flow rate (76.31 m³/day), and inlet concentration (10 ppm), the optimized value of exhaustion capacity and exhaustion time for cadmium ion adsorption in dolochar packed bed is equal to 1.85 mg/g and 11.39 h, respectively. The validity of these simulation experiments can be proven by the fact that the obtained exhaustion capacity of dolochar packed bed always remained in close proximity of the experimentally obtained value of adsorption capacity of the dolochar in batch process mode (equal to 2.1 mg/g).

Recent advances in nanotechnology for remediation of heavy metals

Heavy metal contamination of the environment has become an alarming environmental issue that has constituted serious threats to humans and the ecosystem. These metals have been identified as a priority class of pollutants due to their persistency in the environment and their potential to bioaccumulate in biological systems. Consequently, the remediation of heavy metals from various environmental matrices becomes a critical topic from the biological and environmental perspectives. To this end, various research interests have shifted to the need to put forward economically feasible and highly efficient approaches for mitigating these contaminants in the environment. Thus, numerous conventional approaches have reportedly been employed for the remediation of heavy metals, with each of the methods having its inherent limitations. More recently, studies have revealed that nanomaterials in their various forms show unique potential for the removal of various contaminants including heavy metals in comparison to their bulk counterparts making them a topic of importance to researchers in various fields. Also, various studies have documented specifically tailored nanomaterials that have been synthesized for the removal of heavy metals from various environmental matrices. This review provides up-to-date information on the application of nanotechnology for the remediation of heavy metals. It highlights various nanomaterials that have been employed for the remediation of heavy metals, current details on their methods of synthesis, factors affecting their adsorption processes, and the environmental and health impact of nanomaterials. Finally, it provides the challenges and future trends of nanomaterials for heavy metal removal.

The Use of Polymer Inclusion Membranes for the Removal of Metal Ions from Aqueous Solutions-The Latest Achievements and Potential Industrial Applications: A Review

The growing demand for environmentally friendly and economical methods of removing toxic metal ions from polluted waters and for the recovery of valuable noble metal ions from various types of waste, which are often treated as their secondary source, has resulted in increased interest in techniques based on the utilization of polymer inclusion membranes (PIMs). PIMs are characterized by many advantages (e.g., the possibility of simultaneous extraction and back extraction, excellent stability and high reusability), and can be adapted to the properties of the removed target analyte by appropriate selection of carriers, polymers and plasticizers used for their formulation. However, the selectivity and efficiency of the membrane process depends on many factors (e.g., membrane composition, nature of removed metal ions, composition of aqueous feed solution, etc.), and new membranes are systematically designed to improve these parameters. Numerous studies aimed at improving PIM technology may contribute to the wider use of these methods in the future on an industrial scale, e.g., in wastewater treatment. This review describes the latest achievements related to the removal of various metal ions by PIMs over the past 3 years, with particular emphasis on solutions with potential industrial application.

Enhancement of separation selectivity of hemicellulose from bamboo using freeze-thaw-assisted p-toluenesulfonic acid treatment at low acid concentration and high temperature

The cellulose-rich residual solids are obtained with p-toluenesulfonic acid (p-TsOH) treatment. However, better fractionation of hemicellulose and separation is difficult to obtain during treatment. This study aims at investigating the separation selectivity of bamboo hemicellulose using freeze-thaw-assisted p-TsOH (F/p-TsOH) treatment. The desired separation effect was achieved at freezing temperature -40 °C, freezing time 20 h, p-TsOH concentration 3.0 %, treatment temperature 130 °C and time 80 min. 93.26 % hemicellulose separation was found, which was 32.88 % higher than that of conventional p-TsOH treatment. Furthermore, the separation yield of lignin decreased significantly from 69.29 % to 13.98 %. The distinct lignin characteristic absorption peaks were found, while that of hemicellulose was difficult to observe. The fiber crystallinity index increased from 50.42 to 56.55 %. Furthermore, greater selectivity for hemicellulose separation was achieved. The results provide a new research thinking for efficient fractionation of lignocellulosic biomass by organic acid treatment.

Removal of contaminant in electroplating wastewater and its toxic effect using biosynthesized silver nanoparticles

Abstract

This research is designed to remove contaminant in electroplating wastewater, using biosynthesize silver nanoparticles (SNPs) and to determine its in-vivo toxic effect. Silver nanoparticles (SNPs: 1,2,3 and 4) synthesized at different conditions and characterised, yielded spherical shapes of irregular sizes comprising of − OH, − C=C, − C=O, − C–H and − NO functional groups. The electroplating wastewater treated with the synthesized SNPs, were subjected to physicochemical analysis which revealed the ability of the SNPs to remove pollutants, with SNP4 displaying a higher affinity. The haematological investigation disclosed no significant impact on haemoglobin, packed cell volume, mean corpuscular haemoglobin concentration, red blood cell, neutrophils and lymphocytes compared to the control group. Although, the liver tissues revealed toxic effects of the treated wastewater. The study validates that the biosynthesized SNPs contained stabilizing and reducing agent and also has the ability to eliminate pollutant in electroplating wastewater.

Article highlights

Treatment of electroplating industry wastewater: a review on the various techniques

Water pollution by recalcitrant compounds is an increasingly important problem due to the continuous introduction of new chemicals into the environment. Choosing appropriate measures and developing successful strategies for eliminating hazardous wastewater contaminants from industrial processes is currently a primary goal. Electroplating industry wastewater involves highly toxic cyanide (CN), heavy metal ions, oils and greases, organic solvents, and the complicated composition of effluents and may also contain biological oxygen demand (BOD), chemical oxygen demand (COD), SS, DS, TS, and turbidity. The availability of these metal ions in electroplating industry wastewater makes the water so toxic and corrosive. Because these heavy metals are harmful to living things, they must be removed to prevent them from being absorbed by plants, animals, and humans. As a result, exposure to electroplating wastewater can induce necrosis and nephritis in humans and lung cancer, digestive system cancer, anemia, hepatitis, and maxillary sinus cancer with prolonged exposure. For the safe discharge of electroplating industry effluents, appropriate wastewater treatment has to be provided. This article examines and assesses new approaches such as coagulation and flocculation, chemical precipitation, ion exchange, membrane filtration, adsorption, electrochemical treatment, and advanced oxidation process (AOP) for treating the electroplating industry wastewater. On the other hand, these physicochemical approaches have significant drawbacks, including a high initial investment and operating cost due to costly chemical reagents, the production of metal complexes sludge that needs additional treatment, and a long recovery process. At the same time, advanced techniques such as electrochemical treatment can remove various kinds of organic and inorganic contaminants such as BOD, COD, and heavy metals. The electrochemical treatment process has several advantages over traditional technologies, including complete removal of persistent organic pollutants, environmental friendliness, ease of integration with other conventional technologies, less sludge production, high separation, and shorter residence time. The effectiveness of the electrochemical treatment process depends on various parameters, including pH, electrode material, operation time, electrode gap, and current density. This review mainly emphasizes the removal of heavy metals and another pollutant such as CN from electroplating discharge. This paper will be helpful in the selection of efficient techniques for treatment based on the quantity and characteristics of the effluent produced.

Carbon-based adsorbents as proficient tools for the removal of heavy metals from aqueous solution: A state of art-review emphasizing recent progress and prospects

Carbon-centric adsorbents (CCA) are diverse forms, from simple biochar (BC) to graphene derivatives, carbon nanotubes (CNTs), and activated carbon (AC), which have been vastly explored for their removal of a plethora of pollutants, including heavy metals (HM). The prominent features of CCA are their operational attributes like extensive surface area, the occurrence of flexible surface functional groups, etc. This work offers a comprehensive examination of contemporary research on CCA for their superior metal removal aptitude and performances in simulated solutions and wastewater flows; via portraying the recent research advances as an outlook on the appliances of CACs for heavy metal adsorption for removal via distinct forms like AC, BC, Graphene oxide (GO), and CNTs. The bibliometric analysis tool was employed to highlight the number of documents, country-wise contribution, and co-occurrence mapping based on the Scopus database. The coverage of research works in this review is limited to the last 5 years (2017-2021) to highlight recent progress and prospects in using CCAs such as AC, BC, GO, and CNTs to remove HM from aqueous media, which makes the review unique. Besides an overview of the common mechanisms of CACs, the future scope of CAC, especially towards HM mitigation, is also discussed in this review. This review endorses that further efforts should be commenced to enhance the repertory of CCAs that effectively eliminate multiple targeted metals in both simulated and real wastewater.

The synthesis of nanocellulose-based nanocomposites for the effective removal of hexavalent chromium ions from aqueous solution

The present study reports the synthesis of a polydopamine (PDA)/nanocellulose (NC) nanocomposite for the effective removal of chromium ions from water. PDA was used to modify NC surface producing a nanocomposite namely PDA/NC, by in situ polymerization of dopamine on the surface of NC. Thereafter, the as-synthesized nanocomposite was characterized using familiar techniques such as Fourier transform infrared, X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, and transmission electron microscopy. All results indicated the successful combination of PDA and NC in one nanocomposite. The PDA/NC nanocomposite was evaluated for the removal of hexavalent Cr(vi) ions from an aqueous solution. The adsorption conditions, such as pH, contact time, and initial Cr(vi) concentration, were optimized. Adsorption kinetic studies revealed that Cr(vi) removal on the surface of PDA/NC nanocomposite followed the pseudo-second-order kinetic model. Furthermore, isotherm studies revealed that Cr(vi) removal followed the Langmuir isotherm model with a maximum adsorption capacity (q m) of 210 mg/g. The adsorption mechanism study indicated that the Cr(vi) removal was reached via complexation, adsorption, and chemical reduction. The reusability of a PDA/NC nanocomposite for the removal of Cr(vi) ions was studied up to five cycles with acceptable results. The high adsorption capacity and multiple removal mechanisms validated the effective applicability of PDA/NC nanocomposite as a useful adsorbent for the removal of Cr(vi) ions from aqueous solution.

Selective removal and recovery of gallium and germanium from synthetic zinc refinery residues using biosorption and bioprecipitation

The depletion of primary ores, the environmental concerns related to mining activities, and the need to promote circular economy has drawn attention to the recycling of metallic compounds. Bio-based technologies are suitable for metal recovery, as they operate under mild conditions (ambient temperature and pressure) and are ideal for treating low-concentration waters. This study compared the effectiveness of adsorption and precipitation for the removal and recovery of gallium, germanium and zinc. Adsorption of the metallic ions on elemental forms of sulfur (S⁰), selenium (Se⁰) and tellurium (Te⁰), both of chemical and biological sources, was tested. Biosorption onto elemental forms of S⁰_bio, Se⁰_bio and Te⁰_bio effectively removed Ga and Zn. The highest removal efficiency (ղ) was obtained for Ga onto the adsorbent Te⁰_bio (69 ± 0.4%), with an adsorption capacity (q) of 74 mg Ga (g Te⁰_bio)^-1, followed by Zn (ղ = 40 ± 0.7%) with 43 mg Zn (g Te⁰_bio)^-1. Precipitation with chemical and biogenic sulfide at different metal to sulfide (Me/S) ratios was also assessed. Biologically produced sulfide was more efficient for Ga and Zn compared to chemical sulfide. Precipitation with biogenic sulfide was efficient for the removal of Ga (ղ = 59.9 ± 2.6%) and Zn (ղ = 44.2 ± 3.0%). The lowest ratio between metal to sulfide (Me/S = 0.2) achieved higher zinc removal efficiencies, whereas gallium removal was more efficient at Me/S = 1.5. None of the tested methods allowed for recovery of Ge. Biosorption and bioprecipitation gave nevertheless high removal and recovery of Ga and Zn.

Recent advances of carbon-based nanomaterials (CBNMs) for wastewater treatment: Synthesis and application

Carbon-based nanomaterials (CBNMs) have attracted significant alert due to the affluent science underpinning their implementations associated with a novel mixture of high aspect proportions, greater thermal and electrical performance, outstanding optical features, and high exterior area. CBNMs not only bear assurance in a broad range of implementations in medication, nano and microelectronics, and ecological remedies but may also be utilized in practical laboratory determinations. More specifically, CBNMs perform as an outstanding adsorbent in terminating heavy metal ions (HMI) from wastewater. There is presently a deficiency of powerful threat inspection instruments owing to their complex detection and related deficit in the health risk database. Therefore, our present review concentrates on spreading CBNMs to release pollutants from wastewater. The article wraps the effect of these contaminants and photocatalytic strategies towards treating these mixtures in wastewater, along with their restrictions and challenges, convincing resolutions, and possibilities of these approaches.

Adsorption of chlortetracycline in aquaculture wastewater by lanthanum modified multi-walled carbon nanotubes

The lanthanum modified multi-walled carbon nanotubes (La-CNTs) prepared by an impregnation method were investigated for the adsorption of chlortetracycline (CTC) in aquaculture wastewater. The adsorbents were characterized by SEM, EDS, XRD and BET. The effects of some factors including La-containing impregnant concentration, adsorbent dosage, CTC adsorbate concentration, adsorption time, pH of the adsorbate solution and additional ions on the CTC adsorption by La-CNTs were investigated in detail, and the optimal adsorption conditions were determined. The adsorption kinetics obeyed the quasi-second-order kinetic model. The adsorption isotherms obeyed the Langmuir model and the fitted maximum capacity of La-CNTs for CTC adsorption was 55.3 mg/g.

A critical overview of MXenes adsorption behavior toward heavy metals

In recent years, tremendous interest has been generated in MXenes as a fast-growing and diversified family of two-dimensional (2D) materials with a wide range of potential uses. MXenes exhibit many unique structural and physicochemical properties that make them particularly attractive as adsorbents for removing heavy metals from aqueous media, including a large surface area, abundant surface terminations, electron-richness, and hydrophilic nature. In light of the adsorption capabilities of MXenes at the ever-increasing rate of expansion, this review investigates the recent computational predictions for the adsorption capabilities of MXenes and the effect of synthesis of different MXene on their remediation behavior toward heavy metals. The influence of MXene engineering strategies such as alkalization, acidification, and incorporation into organic and inorganic hosts on their surface properties and adsorption capacity is compared to provide critical insights for designing effective MXene adsorbents. Additionally, the review discusses MXenes' adsorption mechanisms, the effect of coexisting ions on MXenes' selectivity, the regeneration of exhausted MXenes, and provides an overview of MXenes' stability and biocompatibility to demonstrate their potentiality for wastewater remediation. Finally, the review identifies current flaws and offers recommendations for further research.

Graphene-based nanomaterials in the electroplating industry: A suitable choice for heavy metal removal from wastewater

The presence of various heavy metal ions in the industrial waste waters has recently been a challenging issue for human health. Since heavy metals are highly soluble in the aquatic environments and they can be absorbed easily by living organisms, their removal is essential from the environmental point of view. Many studies have been devoted to investigating the environmental behaviour of graphene-based nanomaterials as sorbent agents to remove metals from wastewaters arising by galvanic industries. Among the graphene derivates, especially graphene oxide (GO), due to its abundant oxygen functional groups, high specific area and hydrophilicity, is a high-efficient adsorbent for the removal of heavy and precious metals in aquatic environment. This paper reviews the main graphene, GO, functionalized GO and their composites and its applications in the metals removal process. The influencing factors, adsorption capacities and reuse capability are highlighted for the most extensively used heavy metals, including copper, zinc, nickel, chromium, cobalt and precious metals (i.e., gold, silver, platinum, palladium, rhodium, and ruthenium) in the electroplating process.

Synchronous Cr(VI) Remediation and Energy Production Using Microbial Fuel Cell from a Subsurface Environment: A Review

Applying microbial fuel cell (MFC) technology for eco-remediation of Cr(VI) pollution from a subsurface environment has great scientific value and practical significance due to its promising advantages of pollutant remediation and renewable energy generation. The aim of the current review is to summarize the migration characteristics of Cr(VI) in a subsurface soil/water environment and investigate the factors affecting the MFC performance for synchronous Cr(VI) remediation and power generation, and sequentially highlight diverse challenges of MFC technology for in situ remediation of subsurface groundwater and soils. The critical review put forward that Cr(VI) removal efficiency and energy production of MFC can be improved by enhancing the adjustability of cathode pH, setting potential, modifying electrode, and incorporating other technologies into MFC. It was recommended that designing typical large-scale, long-term continuous flow MFC systems, adding electron shuttle media or constructing artificial electron according to actual groundwater/soil and Cr(VI) pollution characteristics, site geology, and the hydrogeology condition (hydrochemical conditions, colloid type, and medium) are essential to overcome the limitations of the small size of the laboratory experiments and improve the application of technology to in situ Cr(VI) remediation. This review provided reference and ideas for future research of MFC-mediated onsite Cr(VI) remediation.

Dual-function hydrogel composite for post-electroplating cationic and anionic metal removal: A practicality study

Metals produced as by-products of the electroplating process pose threats to both human and environmental health, so it is important that they are removed from electroplating effluents. In this study, a dual-function hydrogel composite, prepared from a pair of cationic and anionic hydrogel composites via a facile method, was tested in batch and in a fluidized-bed column to treat a simulated electroplating effluent. For the batch treatment, both adsorption and desorption reached equilibrium within 30 min, showing the dual-function composite's fast adsorption capacity. Additionally, the removal efficiency was found to be pH-independent, and insignificant effect was found in the co-presence of monovalent ions (up to 10 meq L^-1). Reusability of the dual-function composite was tested for six cycles, where the treated effluent consistently met discharge standards, and the reused adsorbent was confirmed by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy to be highly stable. The fast settling by gravity of the dual-function composite in batch motivated further studies of the material in a fluidized-bed column. Process variables such as feed flow, airflow, and adsorbent's bed depth were optimized using response surface methodology (RSM). Using an optimal solution, the model predicted a treatable cationic volume of 1045 mL and an anionic volume of 1695 mL; their corresponding experimental values were 1028 and 1680 mL. Therefore, in terms of practicality (fast removal, pH-independence, high stability, and gravity-driven settling), the application of the dual-function composite in a fluidized-bed reactor has shown much promise for the simultaneous removal of post-electroplating cationic and anionic metals.

In-situ, Ex-situ, and nano-remediation strategies to treat polluted soil, water, and air - A review

Nanotechnology, as an emerging science, has taken over all fields of life including industries, health and medicine, environmental issues, agriculture, biotechnology etc. The use of nanostructure molecules has revolutionized all sectors. Environmental pollution is a great concern now a days, in all industrial and developing as well as some developed countries. A number of remedies are in practice to overcome this problem. The application of nanotechnology in the bioremediation of environmental pollutants is a step towards revolution. The use of various types of nanoparticles (TiO2 based NPs, dendrimers, Fe based NPs, Silica and carbon nanomaterials, Graphene based NPs, nanotubes, polymers, micelles, nanomembranes etc.) is in practice to diminish environmental hazards. For this many In-situ (bioventing, bioslurping, biosparging, phytoremediation, permeable reactive barrier etc.) and Ex-situ (biopile, windrows, bioreactors, land farming etc.) methodologies are employed. Improved properties like nanoscale size, less time utilization, high adaptability for In-situ and Ex-situ use, undeniable degree of surface-region to-volume proportion for possible reactivity, and protection from ecological elements make nanoparticles ideal for natural applications. There are distinctive nanomaterials and nanotools accessible to treat the pollutants. Each of these methods and nanotools depends on the properties of foreign substances and the pollution site. The current designed review highlights the techniques used for bioremediation of environmental pollutants as well as use of various nanoparticles along with proposed In-situ and Ex-situ bioremediation techniques.

Polyethylene over magnetite-multiwalled carbon nanotubes for kerosene removal from water

In this study, a nano-adsorbent was prepared for kerosene removal from water. Multiwalled carbon nanotubes (MWCNTs) were functionalized with concentrated HNO₃ (nitric acid). Subsequently, Fe₃O₄ (magnetite) nanoparticles were deposited on the MWCNTs to prepare a magnetite/MWCNTs (Fe-MWCNTs) nanocomposite. Then, polyethylene was added to the Fe-MWCNTs to fabricate a polyethylene/magnetite/MWCNTs (PE/Fe-MWCNTs) novel nanocomposite. The nano-adsorbent was characterized using BET, FTIR, Raman, XRD, TEM, and SEM. A kerosene-water model mixture was used for adsorption tests. Several parameters: adsorption time, adsorbent dose, solution pH, solution temperature, and kerosene concentration in the kerosene-water model mixture, were analyzed during adsorption experiments. After each batch experiment, kerosene concentration was determined using high-performance liquid chromatography (HPLC). Magnetic field was used to remove the adsorbent after each experiment. The kerosene adsorption capacity and removal efficiency of the PE/Fe-MWCNTs nanocomposite (3560 mg/g and 71.2 %, respectively) were higher than those of Fe-MWCNTs, ox-MWCNTs, and fresh MWCNTs (3154 mg/g and 63.1 %, 2204 mg/g and 44.0 %, and 2092 mg/g and 41.8 %, respectively). Kerosene adsorption followed a pseudo-second-order kinetic model (R² = 0.999) and the Langmuir isotherm model, suggesting that adsorption was uniform and homogenous process.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Recent Insights and Multifactorial Applications of Carbon Nanotubes

Nanotechnology has undergone significant development in recent years, particularly in the fabrication of sensors with a wide range of applications. The backbone of nanotechnology is nanostructures, which are determined on a nanoscale. Nanoparticles are abundant throughout the universe and are thought to be essential building components in the process of planet creation. Nanotechnology is generally concerned with structures that are between 1 and 100 nm in at least one dimension and involves the production of materials or electronics that are that small. Carbon nanotubes (CNTs) are carbon-based nanomaterials that have the structure of tubes. Carbon nanotubes are often referred to as the kings of nanomaterials. The diameter of carbon is determined in nanometers. They are formed from graphite sheets and are available in a variety of colors. Carbon nanotubes have a number of characteristics, including high flexibility, good thermal conductivity, low density, and chemical stability. Carbon nanotubes have played an important part in nanotechnology, semiconductors, optical and other branches of materials engineering owing to their remarkable features. Several of the applications addressed in this review have already been developed and used to benefit people worldwide. CNTs have been discussed in several domains, including industry, construction, adsorption, sensors, silicon chips, water purifiers, and biomedical uses, to show many treatments such as injecting CNTs into kidney cancers in rats, drug delivery, and directing a near-infrared laser at the cancers. With the orderly development of research in this field, additional therapeutic modalities will be identified, mainly for dispersion and densification techniques and targeted drug delivery systems for managing and curing posterior cortical atrophy. This review discusses the characteristics of carbon nanotubes as well as therapeutic applications such as medical diagnostics and drug delivery.

Biodegradable polymers and their nano-composites for the removal of endocrine-disrupting chemicals (EDCs) from wastewater: A review

Endocrine-disrupting chemicals (EDCs) target the endocrine system by interfering with the natural hormones in the body leading to adverse effects on human and animal health. These chemicals have been identified as major polluting agents in wastewater effluents. Pharmaceuticals, personal care products, industrial compounds, pesticides, dyes, and heavy metals are examples of substances that could be considered endocrine active chemicals. In humans, these chemicals could cause obesity, cancer, Alzheimer's disease, autism, reproductive abnormalities, and thyroid problems. While in wildlife, dysfunctional gene expression could lead to the feminization of some aquatic organisms, metabolic diseases, cardiovascular risk, and problems in the reproductive system as well as its levels of hatchability and vitellogenin. EDCs could be effectively removed from wastewater using advanced technologies such as reverse osmosis, membrane treatment, ozonation, advanced oxidation, filtration, and biodegradation. However, adsorption has been proposed as a more promising and sustainable method for water treatment than any other reported technique. Increased attention has been paid to biodegradable polymers and their nano-composites as promising adsorbents for the removal of EDCs from wastewater. These polymers could be either natural, synthetic, or a combination of both. This review presents a summary of the most relevant cases where natural and synthetic biodegradable polymers have been used for the successful removal of EDCs from wastewater. It demonstrates the effectiveness of these polymers as favorable adsorbents for novel wastewater treatment technologies. Hitherto, very limited work has been published on the use of both natural and synthetic biodegradable polymers to remove EDCs from wastewater, as most of the studies focused on the utilization of only one type, either natural or synthetic. Therefore, this review could pave the way for future exploration of biodegradable polymers as promising and sustainable adsorbents for the removal of various types of pollutants from wastewater.

Electrospun Polyacrylonitrile/Lignin/Poly(Ethylene Glycol)-Based Porous Activated Carbon Nanofiber for Removal of Nickel(II) Ion from Aqueous Solution

The issue of heavy metal contamination has caused a great deal of concern among water quality experts today, as it contributes to water pollution. Activated carbon nanofibers (ACNFs) showed a significant ability in removing heavy metals from the wastewater. In this study, polyacrylonitrile (PAN) was blended and electrospun with an abundant and inexpensive biopolymer, lignin and a water soluble polymer, poly(ethylene glycol) (PEG), by using an electrospinning technique to form nanofibers. The electrospun nanofibers were then investigated as a precursor for the production of porous ACNFs to study the removal of nickel(II) ions by adsorption technique. PEG was added to act as a porogen and to create the porous structure of carbon nanofibers (CNFs). CNFs were prepared by thermal treatment of the electrospun nanofibers and followed by activation of CNFs by thermal and acid treatment on CNFs. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) spectral analysis of the ACNFs showed a strong absorption peak of the C-O functional group, indicating the increase in the oxygenated compound. Field emission scanning electron microscopy (FESEM) images concluded that the ACNFs have more porous and compact fibers with a smaller fiber diameter of 263 ± 11 nm, while the CNFs are less compact and have slightly larger fiber diameter of 323 ± 6 nm. The adsorption study showed that the ACNFs possessed a much higher adsorption capacity of 18.09 mg/g compared with the CNFs, which the amount adsorbed was achieved only at 2.7 mg/g. The optimum adsorption conditions that gave the highest percentage of 60% for nickel(II) ions removal were 50 mg of adsorbent dosage, 100 ppm of nickel(II) solution, pH 3, and a contact time of 60 min. The study demonstrated that the fabrication of ACNFs from PAN/lignin/PEG electrospun nanofibers have potential as adsorbents for the removal of heavy metal contaminants.

Cleaner technologies to combat heavy metal toxicity

Heavy metals frequently occur as silent poisons present in our daily diet, the environment we live and the products we use, leaving us victims to various associated drastic health and ecological bad effects even in meagre quantities. The prevalence of heavy metals can be traced from children's toys, electronic goods, industrial effluents, pesticide preparation, and even in drinking water in some instances; necessitating methods to remediate them. The current review discusses the various physicochemical and biological methods employed to tackle the problem of heavy metal pollution. Apart from the conventional methods following the principles of adsorption, precipitation, coagulation, and various separation techniques, the advancements made in the directions of biological heavy metal detoxification using microbes, plants, algae have been critically analyzed to identify the specific utility of different agents for specific heavy metal removal. The review paper is a nutshell of different heavy metal remediation strategies, their merits, demerits, and modifications done to alleviate process of heavy metal pollution.

Polystyrene-Fe3O4-MWCNTs Nanocomposites for Toluene Removal from Water

In this research, multi-walled carbon nanotubes (MWCNTs) were functionalized by oxidation with strong acids HNO₃, H₂SO₄, and H₂O₂. Then, magnetite/MWCNTs nanocomposites were prepared and polystyrene was added to prepare polystyrene/MWCNTs/magnetite (PS:MWCNTs:Fe) nanocomposites. The magnetic property of the prepared nano-adsorbent PS:MWCNTs:Fe was successfully checked. For characterization, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and BET surface area were used to determine the structure, morphology, chemical nature, functional groups, and surface area with pore volume of the prepared nano-adsorbents. The adsorption procedures were carried out for fresh MWCNTs, oxidized MWCNTs, MWCNTs-Fe, and PS:MWCNTs:Fe nanocomposites in batch experiments. Toluene standard was used to develop the calibration curve. The results of toluene adsorption experiments exhibited that the PS:MWCNTs:Fe nonabsorbent achieved the highest removal efficiency and adsorption capacity of toluene removal. The optimum parameters for toluene removal from water were found to be 60 min, 2 mg nano-sorbent dose, pH of 5, solution temperature of 35 °C at 50 mL volume, toluene concentration of 50 mg/L, and shaking speed of 240 rpm. The adsorption kinetic study of toluene followed the pseudo-second-order kinetics, with the best correlation (R²) value of 0.998, while the equilibrium adsorption study showed that the Langmuir isotherm was obeyed, which suggested that the adsorption is a monolayer and homogenous.

Deciphering the microbial patterns of anammox process under hexavalent chromium stress: Abundant and rare subcommunity respond differently

This study aims to unravel the microbial responses to Cr(VI) stress in anaerobic ammonium oxidation (anammox) reactor. The result showed that anammox process could tolerate 2 mg/L Cr(VI) after acclimation, while 5 mg/L Cr(VI) stress resulted in significant inhibition on anammox bacterial activity. Ca. Jettenia was the predominant anammox genus, whose abundance showed a decreasing tendency with increasing Cr(VI) dosage. Cr(VI) addition resulted in significant and irreversible changes in microbial community structure, and increased the relative influence of stochastic processes on community assembly. Furthermore, rare subcommunity contributed greatly to biodiversity of whole community (90.35%), while abundant subcommunity were more similar to the whole community. Importantly, Cr(VI) exposure caused greater variations in rare subcommunity compared with abundant one, indicating that rare taxa were more sensitive to Cr(VI) stress. This was further confirmed by ABT model, which showed higher relative influence of Cr(VI) on rare subcommunity. In addition, results suggested that rare taxa play essential roles in whole community stability, because of their great contribution to species richness and community variations, and keystone roles in ecosystem network. Moreover, network analysis showed that conditionally rare taxa frequently and positively interacted with abundant taxa, which may contribute to the community resilience to Cr(VI) stress.

Microalgae and bio-polymeric adsorbents: an integrative approach giving new directions to wastewater treatment

This review analyses the account of biological (microalgae) and synthetic (bio-polymeric adsorbents) elements to compass the treatment efficiencies of various water pollutants and mechanisms behind them. While considering pollutant removal, both techniques have their own merits and demerits. Microalgal-based methods have been dominantly used as a biological method for pollutant removal. The main limitations of microalgal methods are capacity, scale, dependence on variables of environment and duration of the process. Biopolymers on the other hand are naturally produced, abundant in nature, environmentally safe and biocompatible with cells and many times biodegradable. Algal immobilization in biopolymers has promoted the reuse of cells for further treatment and protected cells from toxic environment monitoring and controlling the external factors like pH, temperature and salinity can promote the removal process while working with the mentioned technologies. In this review, a mechanistic view of both these techniques along with integrated approaches emphasizing on their loopholes and possibilities of improvement in these techniques is represented. In addition to these, the review also discusses the post-treatment effect on algal cells which are specifically dependent on pollutant type and their concentration. All these insights will aid in developing integrated solutions to improve removal efficiencies in an environmentally safe and cost-effective manner.Novelty statement The main objective of this review is to thoroughly understand the role of micro-algal cells and synthetic adsorbents individually as well as their integrative effect in the removal of pollutants from wastewater. Many reviews have been published containing information related to either removal mechanism by algae or synthetic adsorbents. While in this review we have discussed the agents, algae and synthetic adsorbents along with their limitations and explained how these limitations can be overcome with the integration of both the moieties together in process of immobilization. We have covered both the analytical and mechanistic parts of these technologies. Along with this, the post-treatment effects on algae have been discussed which can give us a critical understanding of algal response to pollutants and by-products obtained after treatment. This review contains three different sections, their importance and also explained how these technologies can be improved in the future aspects.

Zinc removal and recovery from industrial wastewater with a microbial fuel cell: Experimental investigation and theoretical prediction

Microbial fuel cells (MFCs) that simultaneously remove organic contaminants and recovering metals provide a potential route for industry to adopt clean technologies. In this work, two goals were set: to study the feasibility of zinc removal from industrial effluents using MFCs and to understand the removal process by using reaction rate models. The removal of Zn²⁺ in MFC was over 96% for synthetic and industrial samples with initial Zn²⁺ concentrations less than 2.0 mM after 22 h of operation. However, only 83 and 42% of the zinc recovered from synthetic and industrial samples, respectively, was attached on the cathode surface of the MFCs. The results marked the domination of electroprecipitation rather than the electrodeposition process in the industrial samples. Energy dispersive X-ray (EDX) analysis showed that the recovered compound contained not only Zn but also O, evidence that Zn(OH)₂ could be formed. The removal of Zn²⁺ in the MFC followed a mechanism where oxygen was reduced to hydroxide before reacting with Zn²⁺. Nernst equations and rate law expressions were derived to understand the mechanism and used to estimate the Zn²⁺ concentration and removal efficiency. The zero-, first- and second-order rate equations successfully fitted the data, predicted the final Zn²⁺ removal efficiency, and suggested that possible mechanistic reactions occurred in the electrolysis cell (direct reduction), MFC (O₂ reduction), and control (chemisorption) modes. The half-life, t_1/2, of the Zn²⁺ removal reaction using synthetic and industrial samples was estimated to be 7.0 and 2.7 h, respectively. The t_1/2 values of the controls (without the power input from the MFC bioanode) were much slower and were recorded as 21.5 and 7.3 h for synthetic and industrial samples, respectively. The study suggests that MFCs can act as a sustainable and environmentally friendly technology for heavy metal removal without electrical energy input or the addition of chemicals.

Oil palm empty fruit bunch valorization for activated and non-activated carbon nanoparticles and its heavy-metal-removal efficiency

In this study, we examined activated and non-activated carbon nanoparticles (CNPs) derived from oil palm empty fruit bunch (OPEFB) fibers for their nanomaterial characteristics and their potential effectiveness in heavy metal removal. To investigate these properties, transmission electron microscopy, scanning electron microscopy (SEM), EDX, Fourier transform infrared spectroscopy, particle size analysis, X-ray diffraction, and atomic absorption spectrophotometry were employed. This study shows that both the activated and the non-activated CNPs were in the form of well-dispersed and aggregated particles. As analyzed using SEM, the external surfaces of the non-activated CNPs were determined to be irregular, while those of the activated CNPs had a more circular shape without aggregation. Carbon was the most dominant element observed in these CNPs, and the occurrence of its activation process altered the chemical functional groups of the non-activated CNPs by shifting their wavenumbers and intensities. Additionally, the activation process increased the crystallinity domain in the activated CNPs. OPEFB fibers could be valorized to obtain both activated and non-activated CNPs that had the potential efficiency to remove heavy metals, including copper (Cu), lead (Pb), iron (Fe), and zinc (Zn) at certain times. Based on the analysis of the Langmuir and Freundlich models, the activated and non-activated CNPs were found to have shown favorable adsorption to Cu, Pb, and Fe, with a percentage of heavy metal removal of over 84%. The adsorption of heavy metals was carried out via a chemical process.

A multi-factorial mathematical model for the selection of electropolishing parameters with a view to reducing the environmental impact

Electrochemical metal processing is a process that generates harmful pollution. An important goal often disregarded by researchers is not only the achievement of the best possible quality of electropolished surface, but also minimising the load of metal ions in the wastewater generated in the process. The conducted experiments on the electropolishing of stainless steel in laboratory conditions, varied time, temperature and current density conditions, as well as process bath contamination (ranging from 0 to 6% Fe mass) allowed us to develop a multi-factorial mathematical model. This model offers the possibility of being able to select the process parameters recommended for achieving the desired effects. It takes into account such surface quality parameters as roughness and gloss, process duration and current density that determine power consumption, as well as the weight loss of the electropolished element that influence the rate of contamination in processing baths and wastewater. The study presents the composition of a passive film of stainless steel after the electropolishing process at the initial and final stages of the process bath's exploitation. The results obtained from XPS tests were then correlated with the results of corrosion tests and resistance to pitting corrosion in the environment of 0.1 M NaCl.

Heavy Metals Removal from Electroplating Wastewater by Waste Fiber-Based Poly(amidoxime) Ligand

An efficient and economical treatment technology for heavy metal removal from the electroplating wastewaters is needed for the water purification. Therefore, pure cellulosic materials were derived from two waste fiber (pandanus fruit and durian rind) and conversion of the cellulose into the poly(acrylonitrile)-grafted material was accomplished by free radical grafting system. Thereafter, poly(amidoxime) ligand was produced from the grafted materials. Sorption capacity (qe) of several toxic metals ions was found to be high, e.g., copper capacity (qe) was 298.4 mg g−1 at pH 6. In fact, other metal ions, such as cobalt chromium and nickel also demonstrated significant sorption capacity at pH 6. Sorption mechanism played acceptable meet with pseudo second-order rate of kinetic pattern due to the satisfactory correlation with the experimental sorption values. A significant correlation coefficient (R2 > 0.99) with Langmuir model isotherm showed the single or monolayer sorption occurred on the surfaces. The reusability study showed that the polymer ligand can be useful up to six cycles with minimum loss (7%) of efficiency and can be used in the extraction of toxic metal ions present in the wastewaters. Therefore, two types of electroplating wastewater were used in this study, one containing high concentration of copper (23 ppm) and iron (32 ppm) with trace level of others heavy metals (IWS 1) and another containing high concentration of copper (85.7 ppm) only with trace level of others heavy metals (IWS 2). This polymeric ligand showed acceptable removal magnitude, up to 98% of toxic metal ions can be removed from electroplating wastewater.

Design and characterization of PANI/starch/Fe2O3 bio composite for wastewater remediation

A new synthesized polyaniline/starch/hematite bio composite (PANI/S/Fe₂O₃ BC) has been studied as an effective material for on-site water remediation. PANI/S/Fe₂O₃ BC was developed by combining the techniques of co-precipitation and interfacial polymerization in the presence of aqueous starch solution in an acidic medium under ultrasonic irradiation. The nano-morphologies and structures of the designed PANI/S/Fe₂O₃ BC were evaluated by various techniques relative to PANI and Fe₂O₃ nanoparticles. In single and multiple systems, PANI/S/Fe₂O₃ BC was evaluated as a possible adsorbent for different heavy metals, including As³⁺, Zn²⁺, and Co²⁺, relative to PANI and Fe₂O₃ nanoparticles. In terms of pH value, operating temperature, initial heavy metal concentration, contact time, adsorbent dose and competitive ions in the solutions, the adsorption process was optimized. For 92% overall adsorption of Co²⁺ and 100% overall adsorption of both As³⁺ and Zn²⁺, the adsorption equilibrium was achieved within 60 and 120 min, respectively. In addition, adsorption thermodynamic analysis shows that the As³⁺ ions adsorption process was not random and the pseudo-second-order fitted with experimental results. Moreover, PANI/S/Fe₂O₃ BC was evaluated as an antibacterial agent against Gram-negative bacteria (Salmonella typhimurium) and Gram-positive bacteria (S. aureus, Methicillin-Resistant Staphylococcus, Aureus Clinical isolate and Bacillus subtilis). The reported performances indicated that the PANI/S/Fe₂O₃ BC is a potent candidate for industrial water bioremediation.

Effect of hexavalent chromium on the environment and removal techniques: A review

Despite the importance of chromium (Cr) in most anthropogenic activities, the subsequent environmental adulteration is now a source of major concern. Cr occurs in numerous oxidation states, with the furthermost stable and frequently occur states being Cr(0), Cr(III) and Cr(VI). Cr(0) and Cr(III) are vital trace elements while Cr(VI) is dispensable and noxious to living organisms. Predominantly in plants, Cr at low concentrations of about 0.05-1 mg/L assist to boost growth as well as increase productivity. However, accumulation of Cr could represent a potential threat to living organisms. Cr absorption, displacement and accretion depend on its speciation, which also determines its toxicity which is often diverse. Indications of its toxicity include; reduction of seed germination, retardation of growth, reduction of yield, inhibition of enzymatic activities, weakening of photosynthesis, nutrient, oxidative disparities and genetic mutation in plants as well as several injurious diseases in animals and humans. In this study, we have presented a comprehensive review as well as an informative account of the influence of Cr on the environment drawn from researches carried out over the years following an analytical approach. Uniquely, this work presents a review of the effects and remediation of Cr from soil and wastewater drawn from several evidence and meta-data-based articles and other publications. Accordingly, the write-up is intended to appeal to the consciousness of the general public that the significance of Cr notwithstanding, its environmental toxicity should not be taken for granted.