Two-phase wash to solve the ubiquitous contaminant-carryover problem in commercial nucleic-acid extraction kits

An Ion Concentration Polarization Microplatform for Efficient Enrichment and Analysis of ctDNA

Strategies for rapid, effective nucleic acid processing hold tremendous significance to the clinical analysis of circulating tumor DNA (ctDNA), a family of important markers indicating tumorigenesis and metastasis. However, traditional techniques remain challenging to achieve efficient DNA enrichment, further bringing about complicated operation and limited detection sensitivity. Here, we developed an ion concentration polarization microplatform that enabled highly rapid, efficient enrichment and purification of ctDNA from a variety of clinical samples, including serum, urine, and feces. The platform demonstrated efficiently separating and enriching ctDNA within 30 s, with a 100-fold improvement over traditional methods. Integrating an on-chip isothermal amplification module, the platform further achieved 100-fold enhanced sensitivity in ctDNA detection, which significantly eliminated false-negative results in the serum or urine samples due to the low abundance of ctDNA. Such a simple-designed platform offers a user-friendly yet powerful diagnosis technique with a wide applicability, ranging from early tumor diagnosis to infection screening.

Abridged solid-phase extraction with alkaline Poly(ethylene) glycol lysis (ASAP) for direct DNA amplification

Complexity of sample preparation decelerate the development of sample-in-answer-out devices for point-of-need nucleic acid amplification testing. Here, we present the consolidation of alkaline poly(ethylene) glycol-based lysis and solid-phase extraction for rapid and simple sample preparation compatible with direct on-bead amplification. Simultaneous cell lysis and binding of DNA were achieved using an optimised reagent comprising 15% PEG8000, 0.5 M NaCl, and 3.5 mM KOH. This was combined with direct, on-bead amplification using 1.5 μg beads per 20 μL PCR reaction mix. The novel single reagent, 5-min method improved the detection limit by 10 and 100-fold compared with commercial DNA extraction kits and the original alkaline PEG lysis method, respectively. The sensitivity can be further enhanced by one amplification cycle with an ethanol wash or by extending the incubation to 10 min before collecting the magnetic particles. Both methods successfully detected a single copy of Escherichia coli DNA. In biological fluids (saliva, sweat, and urine), the 5-min method was delayed by about one cycle compared to the 15-min method. The proposed methods are attractive for incorporation in the workflow for point-of-need testing of biological samples by providing a practical and chemical method for simple alternative DNA sample preparation.

Chemical Trends in Sample Preparation for Nucleic Acid Amplification Testing (NAAT): A Review

Nucleic acid amplification testing facilitates the detection of disease through specific genomic sequences and is attractive for point-of-need testing (PONT); in particular, the early detection of microorganisms can alert early response systems to protect the public and ecosystems from widespread outbreaks of biological threats, including infectious diseases. Prior to nucleic acid amplification and detection, extensive sample preparation techniques are required to free nucleic acids and extract them from the sample matrix. Sample preparation is critical to maximize the sensitivity and reliability of testing. As the enzymatic amplification reactions can be sensitive to inhibitors from the sample, as well as from chemicals used for lysis and extraction, avoiding inhibition is a significant challenge, particularly when minimising liquid handling steps is also desirable for the translation of the assay to a portable format for PONT. The reagents used in sample preparation for nucleic acid testing, covering lysis and NA extraction (binding, washing, and elution), are reviewed with a focus on their suitability for use in PONT.

An evaluation of DNA extraction methods on historical and roadkill mammalian specimen

Guidelines identifying appropriate DNA extraction methods for both museum and modern biological samples are scarce or non-existent for mammalian species. Yet, obtaining large-scale genetic material collections are vital for conservation and management purposes. In this study, we evaluated five protocols making use of either spin-column, organic solvents, or magnetic bead-based methods for DNA extraction on skin samples from both modern, traffic-killed (n = 10) and museum (n = 10) samples of European hedgehogs, Ericaneus europaeus. We showed that phenol-chloroform or silica column (NucleoSpin Tissue) protocols yielded the highest amount of DNA with satisfactory purity compared with magnetic bead-based protocols, especially for museum samples. Furthermore, extractions using the silica column protocol appeared to produce longer DNA fragments on average than the other methods tested. Our investigation demonstrates that both commercial extraction kits and phenol-chloroform protocol retrieve acceptable DNA concentrations for downstream processes, from degraded remnants of traffic-killed and museum samples of mammalian specimens. Although all the tested methods could be applied depending on the research questions and laboratory conditions, commercial extraction kits may be preferred due to their effectiveness, safety and the higher quality of the DNA extractions.

Improved DNA extraction on bamboo paper and cotton is tightly correlated with their crystallinity and hygroscopicity

DNA extraction, a vital pre-requisite for most biological studies, continues to be studied extensively. According to some studies, DNA shows a certain degree of absorbability on filter paper made of plant fiber-based adsorbent material. However, the principle underlying such specific adsorption as well as plant species associated with plant fiber-based adsorbents and optimized extraction conditions have not yet been studied. This study demonstrates the tight correlation between crystallinity and hygroscopicity in plant fiber-based adsorbents used for DNA extraction and proposes the concept of DNA adsorption on plant fiber-based adsorbents, for the first time. We also explored optimal extracting and eluting conditions and developed a novel plant fiber-based DNA extraction method that was quadruple times more powerful than current approaches. Starting with the screening of various types of earthed plant fiber-based adsorbents, we went on to mine new plant fiber-based adsorbents, bamboo paper and degreased cotton, and succeeded in increasing their efficiency of DNA extraction to 4.2 times than that of current approaches. We found a very strong correlation between the crystallinity and hygroscopicity of plant fiber-based adsorbents which showed efficiency for DNA extraction, and thus propose a principle that potentially governs such specific adsorption processes, in the hope that this information may guide related multidisciplinary research studies in the future. Nanodrop, electrophoresis and PCR were selected to demonstrate the quantity, quality, integrity and utility of the extracted DNA. Furthermore, crystallinity, hygroscopicity, pore size distribution and composition of plant fiber-based adsorbents were studied to explore their correlation in an attempt to understand the principle underlying this particular type of adsorption. The findings of this study may be further extended to the extraction of other types of nucleic acids with similar biochemical properties.

Filtration-assisted magnetofluidic cartridge platform for HIV RNA detection from blood

The ability to detect and quantify HIV RNA in blood is essential to sensitive detection of infections and monitoring viremia throughout treatment. Current options for point-of-care HIV diagnosis (i.e. lateral flow rapid tests) lack sensitivity for early detection and are unable to quantify viral load. HIV RNA diagnostics typically require extensive pre-processing of blood to isolate plasma and extract nucleic acids, in addition to expensive equipment for conducting nucleic acid amplification and fluorescence detection. Therefore, molecular HIV diagnostics is still mainly limited to clinical laboratories and there is an unmet need for high sensitivity point-of-care screening and at-home HIV viral load quantification. In this work, we outline a streamlined workflow for extraction of plasma from whole blood coupled with HIV RNA extraction and quantitative polymerase chain reaction (qPCR) in a portable magnetofluidic cartridge platform for use at the point-of-care. Viral particles were isolated from blood using manual filtration through a 3D-printed filter module in seconds followed by automated nucleic acid capture, purification, and transfer to qPCR using magnetic beads. Both nucleic acid extraction and qPCR were integrated within cartridges using compact instrumentation consisting of a motorized magnet arm, miniaturized thermocycler, and image-based fluorescence detection. We demonstrated detection down to 1000 copies of HIV viral particles from whole blood in <30 minutes.

Two-phase wash to solve the ubiquitous contaminant-carryover problem in commercial nucleic-acid extraction kits

The success of fundamental and applied nucleic acid (NA) research depends on NA purity, but obtaining pure NAs from raw, unprocessed samples is challenging. Purification using solid-phase NA extractions utilizes sequential additions of lysis and wash buffers followed by elution. The resulting eluent contains NAs and carryover of extraction buffers. Typically, these inhibitory buffers are heavily diluted by the reaction mix (e.g., 10x dilution is 1 µL eluent in 9 µL reaction mix), but in applications requiring high sensitivity (e.g., single-cell sequencing, pathogen diagnostics) it is desirable to use low dilutions (e.g., 2x) to maximize NA concentration. Here, we demonstrate pervasive carryover of inhibitory buffers into eluent when several commercial sample-preparation kits are used following manufacturer protocols. At low eluent dilution (2-2.5x) we observed significant reaction inhibition of polymerase chain reaction (PCR), loop-mediated isothermal amplification (LAMP), and reverse transcription (RT). We developed a two-phase wash (TPW) method by adding a wash buffer with low water solubility prior to the elution step. The TPW reduces carryover of extraction buffers, phase-separates from the eluent, and does not reduce NA yield (measured by digital PCR). We validated the TPW for silica columns and magnetic beads by demonstrating significant improvements in performance and reproducibility of qPCR, LAMP, and RT reactions.