Chitosan hydrogel/silk fibroin/Mg(OH)2 nanobiocomposite as a novel scaffold with antimicrobial activity and improved mechanical properties

Ultrasmall zinc oxide nanoparticle-reinforced chitosan-fucoidan scaffolds for enhanced antibacterial activity and accelerated osteogenesis

Biomaterials derived from natural polymers have raised much attention for use in bone tissue engineering applications because of their high mechanical strength and biocompatibility. However, challenges persist in developing bone materials with the requisite physicochemical and osteogenic properties. In this study, the freeze-drying method fabricated a scaffold using chitosan and fucoidan reinforced with zinc oxide nanoparticles (CSFU@ZnO). The scaffolds were characterized and evaluated for their osteogenic differentiation, proliferation, and viability of pre-osteoblast cells (MC3T3-E1). Field emission-scanning electron microscopy analysis revealed a porous morphology with interconnected pores and hydrogen bond interaction between chitosan and fucoidan, as confirmed by Fourier transform infrared spectroscopy analysis. The combination of fucoidan with chitosan improved the mechanical properties, swelling capacity, and degradability. The CSFU@ZnO scaffold effectively inhibited the growth of S. aureus and E. coli, as shown by a zone of inhibition assay. In vitro studies revealed enhanced MC3T3-E1 viability, proliferation, and adhesion, as validated by SEM analysis. The osteogenic differentiation of the CSFU@ZnO scaffold showed increased alkaline phosphatase activity, better protein adsorption, and improved bone mineralization compared to the chitosan scaffold. These findings suggest that the ZnO nanoparticle-incorporated chitosan and fucoidan scaffold could be a good and viable material for bone tissue engineering.

Chitosan hydrogels loaded with Cu3SnS4 NSs for the treatment of second-degree burn wounds

Globally, burns pose a significant health concern, impairing the skin's normal function and elevating the risk of bacterial infection. Traditional burn dressings often fail to deliver the anticipated therapeutic benefits. Hence, there is an urgent need to develop an ideal wound dressing that exhibits satisfactory antibacterial properties, biocompatibility, and the ability to expedite burn wound healing. Here, we prepared chitosan-based hydrogel (CS/GP), and then loaded copper-tin -sulfur (Cu3SnS4) synthesized by hydrothermal method into the hydrogel to construct a new hydrogel dressing (CS/GP/Cu3SnS4). In vitro antibacterial tests demonstrated that the CS/GP/Cu3SnS4 hydrogel dressing exhibits considerable antibacterial properties, achieving an antibacterial rate exceeding 95% after 4 h of contact with Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Additionally, CCK-8 and live/dead cell staining experiments confirmed the dressing's good biocompatibility. Furthermore, in vivo experiments confirmed that the CS/GP/Cu3SnS4 hydrogel dressing demonstrates superior wound healing performance compared to the control group. In conclusion, the CS/GP/Cu3SnS4 hydrogel shows potential application prospects as a burn wound dressing.

Tri-network PVA/chitosan/gelatin hydrogel modified by tannic acid with self-healing, adhesive and anti-inflammatory properties to accelerate wound healing

Wound inflammation is a key issue in wound healing as it often causes serious complications and delays wound healing. In this study, hemostatic and antimicrobial hydrogels composed of polyvinyl alcohol (PVA), chitosan (CS) and gelatin (Gel) were prepared. Phenylboronic acid (3-CPBA) and tannic acid (TA) were introduced to modify the multinetwork hydrogel to promote wound repair. PGCPT-1.2 hydrogel had a water content of >85 % and was biocompatible. Due to the antibacterial effect of chitosan itself. The PGCPT hydrogel exhibited 100 % antimicrobial activity against both Escherichia coli and Staphylococcus aureus within 12 h. The hydrogel exhibited shape memory behavior and self-healing ability. Histological analysis showed that PGCPT-1.2 hydrogel reduced tumor necrosis factor-α (TNF-α) levels by accelerating collagen deposition. The wound healing rate at day 14 was 97 % ± 0.4 %. PGCPT-1.2 hydrogel dressing with 1.2 % TA addition had the best effect in promoting wound healing, and it is a promising dressing for promoting wound healing and a therapeutic strategy worth developing.

Bioengineered Silk Fibroin Hydrogel Reinforced with Collagen-Like Protein Chimeras for Improved Wound Healing

The study investigates the potentials of the rapid crosslinking hydrogel concoction comprising of natural silk fibroin (SF) and recombinant tailorable collagen-like protein with binding domains for wound repair. The formation of dityrosine crosslinks between the tyrosine moieties augments the formation of stable hydrogels, in the presence of the cytocompatible photo-initiator riboflavin and visible light. This uniquely engineered PASCH (Photo-activated silk fibroin and tailor-made collagen-like protein hydrogel) confers the key advantage of improved biological properties over the control hydrogels comprising only of SF. The physico-chemical characterization of the hydrogels with respect to crosslinking, modulus, and thermal stability delineates the ascendancy of PASCH 7:3 over other combinations. Furthermore, the hybrid protein hydrogel proves to be a favorable cellular matrix as it enhances cell adhesion, elongation, growth, and proliferation in vitro. Time-lapse microscopy studies reveal an enhanced wound closure in human endothelial cell monolayer (EA.hy926), while the gene expression studies portray the dynamic interplay of cytokines and growth factors in the wound milieu facilitating the repair and regeneration of cells, sculpted by the proteins. The results demonstrate the improved physical and biological properties of fabricated PASCH, depicting their synergism, and implying their competency for use in tissue engineering applications.

Synergistic effects of doxorubicin loaded silk fibroin nanoparticles and Cu-TiO2 nanoparticles for local chemo-sonodynamic therapy against breast cancer

A promising new approach to mitigate the adverse effects of chemotherapeutic drugs on healthy tissues involves combining sonodynamic therapy with topical chemotherapy to enhance the therapeutic efficacy of anticancer drugs. In this study, we introduce a multi-functional in situ chitosan hydrogel (CS) containing silk fibroin nanoparticles (SFNPs) loaded with doxorubicin (DOXSFNPs) and CuO/TiO2 nanoparticles (CTNPs) for combination therapy. The developed DOXSFNPs exhibited a size of 257 ± 6 nm, a zeta potential of -14.3 ± 1.8 mV, and a high loading capacity of 12.38 ± 1.73 %. The pH-dependent controlled release of DOX from DOXSF2/CS2 was observed to be more pronounced than that from DOX/CS2. MTT results indicated dose-dependent toxicity of CT/CS2 in response to ultrasaound radiation (US). Our findings revealed a 1.83-fold increase in reactive oxygen species (ROS) production with therapy, with the IC50 of CT3-DOXSF2/CS2-US showing a 58 % reduction compared to CT3/DOXSF2/CS2. In vivo outcomes and histopathological staining demonstrated that the CT3/DOXSF2/CS2-US treatment group exhibited the highest tumor growth inhibition rate, reaching approximately 83.65 %. These findings underscore the potential of this approach in minimizing the adverse effects of chemotherapy while maximizing therapeutic outcomes, offering a valuable contribution to the field of cancer therapy.

Chitosan and Its Nanoparticles: A Multifaceted Approach to Antibacterial Applications

Chitosan, a multifaceted amino polysaccharide biopolymer derived from chitin, has extensive antibacterial efficacy against diverse pathogenic microorganisms, including both Gram-negative and Gram-positive bacteria, in addition to fungi. Over the course of the last several decades, chitosan nanoparticles (NPs), which are polymeric and bio-based, have garnered a great deal of interest as efficient antibacterial agents. This is mostly due to the fact that they are used in a wide variety of applications, including medical treatments, food, chemicals, and agricultural products. Within the context of the antibacterial mechanism of chitosan and chitosan NPs, we present a review that provides an overview of the synthesis methods, including novel procedures, and compiles the applications that have been developed in the field of biomedicine. These applications include wound healing, drug delivery, dental treatment, water purification, agriculture, and food preservation. In addition to this, we focus on the mechanisms of action and the factors that determine the antibacterial activity of chitosan and its derivatives. In conjunction with this line of inquiry, researchers are strongly urged to concentrate their efforts on developing novel and ground-breaking applications of chitosan NPs.

Hybrid thermosensitive hydrogel/amniotic membrane structure incorporating S-nitrosothiol microparticles: potential uses for controlled nitric oxide delivery

Insufficient levels of nitric oxide may lead to chronic and acute wounds. Additionally, it is crucial that nitric oxide is prepared in a controlled-release manner due to its gaseous nature and short half-life. To address this issue, utilizing nitric oxide donors, particularly S-nitrosothiols such as S-nitrosoglutathione (GSNO), could efficiently overcome instability and aid in biomedical applications. Decellularized human amniotic membranes are also best known for their anti-inflammatory, angiogenic, and antimicrobial properties to promote wound epithelization. In this study, a novel nitric oxide-generated wound dressing based on an amniotic membrane was investigated. This construct consisted of a chitosan/β-glycerophosphate thermosensitive hydrogel covered with a decellularized human amniotic layer embedded with GSNO-loaded polylactic acid microparticles. The structure of GSNO was confirmed by spectrometric, elemental, and chemical analyses. The GSNO-loaded microparticles had a diameter of 40.66 ± 6.92 µm, and an encapsulation efficiency of 45.6 ± 6.74%. The hybrid construct and GSNO-loaded microparticles enhanced the long-term stable release of GSNO compared to free GSNO. The construct released nitric oxide ranging from 24 to 68 nM/mg during 7 days. The thermosensitive hydrogel was formed at 32.7 ± 1 °C and had a porous structure with a pore size of 41.76 ± 9.76 µm. The MTT and live/dead assays performed on human dermal fibroblast cells demonstrated suitable cell viability and adhesion to the final construct. Further, hemolysis analysis revealed less than a 5% hemolysis rate due to negligible blood cell adhesion. Overall, the prepared hybrid construct demonstrated suitable characteristics as a potential active wound dressing capable of controlled nitric oxide delivery.

Therapeutic potency of marine collagen/pectin scaffolds - Fabrication, characterization and evaluation

Skin is an important vital organ that must be given proper care and protection from external damage and harmful microbes. If injured, it must be treated with an ideal wound dressing material with potent hemostatic and non-toxic properties. In the present study, fish collagen (FC) was extracted from the fins and tails of Black pomfret (Parastromateus niger). The isolated fish collagen was homogenized with pectin (P) and freeze dried to obtain fish collagen/pectin (FC/P) scaffolds. Scanning electron microscopic analysis showed the porous nature of scaffolds with intermittent holes. UV-Visible and Fourier infrared spectroscopic analyses demonstrated the physicochemical properties of FC/P scaffolds. Hemolytic assay performed using human blood demonstrated the percentage of hemolysis as 0.5 %. In vitro blood clotting assay carried out to determine the hemostatic behaviour displayed the formation of blood clot within 60 s in the presence of FC/P scaffolds. 95 % of cells were viable with the highest concentration of FC/P scaffold used for MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay. Scratch wound assay demonstrated complete closure of wound in FC/P scaffold treated cells after 48 h of treatment. Chick embryo chorioallantoic membrane (CAM) assay showed the development of new blood vessels within 6 h of incubation with the FC/P scaffolds, thereby proving their angiogenic potency. These results indicate the potential use of FC/P scaffolds as effective biomaterials for tissue regenerative applications.

A Review of Chitosan-Based Materials for Biomedical, Food, and Water Treatment Applications

Chitosan, a natural biopolymer with excellent biocompatibility, biodegradability, and modifiable structure, has broad applications in regenerative medicine, tissue engineering, food packaging, and environmental technology. Its abundance, solubility in acidic solutions, and capacity for chemical modification make it highly adaptable for creating specialized derivatives with enhanced properties. Recent advances have demonstrated chitosan's efficacy in composite systems for tissue regeneration, drug delivery, and antimicrobial applications. This review examines chitosan's unique properties, with a focus on its antibacterial activity as influenced by factors like pH, concentration, molecular weight, and deacetylation degree. Additionally, chitosan's potential as a sustainable, non-toxic material for eco-friendly packaging and water treatment is explored, highlighting the growing interest in chitosan composites with other polymers and metallic nanoparticles for enhanced biomedical and environmental applications.

Blends of Silk Waste Protein and Polysaccharides for Enhanced Wound Healing and Tissue Regeneration: Mechanisms, Applications, and Future Perspectives

Wound healing is a highly sophisticated process, and therefore, a pioneering approach for designing excellent wound dressings with desirable characteristics vital for maintaining the external wound environment by assessing the inherent conditions of a patient for effective wound healing. Silk fibroin (SF), a versatile biocompatible material, has garnered significant attention for its potential in the field of wound healing and tissue regeneration. When SF is blended with polysaccharides, their synergistic properties can result in a material with enhanced bioactivity and tunable mechanical properties that facilitate the controlled release of therapeutic agents. This review explores how SF interacts with certain polysaccharides such as cellulose, chitosan, alginate, and hyaluronic acid (HA) and also delves into the underlying mechanisms through which these SF-polysaccharide blends induce processes such as cell adhesion, proliferation, and differentiation for enhanced wound healing and tissue regeneration. This review also emphasizes the potential of the aforementioned blends in diverse wound healing applications in conjunction with other treatment approaches, further addressing the current challenges in this domain and future directions for optimizing SF-polysaccharide blends for clinical research.

Alkaline range pH sensor based on chitosan hydrogel: A novel approach to pH sensing

Monitoring of pH under extreme alkaline range is still a challenge due to the lack of accuracy and validity. This research developed a novel pH sensor (hydrogel/BTB) based on the transition of bromothymol blue from the hydrogel matrix into the pH-examining sample solution. The hydrogel/BTB sensor was synthesized through the solvent casting of chitosan, citric acid as the crosslinker, and bromothymol blue as a pH-sensitive dye. The structure of hydrogel/BTB was characterized using Fourier-transform infrared spectroscopy (FT-IR), Energy-dispersive X-ray spectroscopy (EDS), Field emission scanning electron microscopy (FE-SEM), Brunauer-Emmett-Teller (BET) analysis, and thermogravimetric analysis (TGA). The effect of various parameters on pH determination was investigated. The developed pH sensor demonstrated a linear detection range validated from pH 10 to 14 using the gravimetric method, and from pH 11 to 14 using the colorimetric method. The sensor successfully detected pH in alkaline tap water, carbonate buffer, and ethanol amine buffer. The transition of bromothymol blue is described by the Peppas-Korsmeyer kinetic model. The activation and Gibbs free energy were obtained as 357.1 J/mol and 260 J/mol, respectively. This work furnished a new mechanism for pH detection, and it has excellent potential for developing novel sensors in this field.

Production of a magnetic nanocomposite for biological and hyperthermia applications based on chitosan-silk fibroin hydrogel incorporated with carbon nitride

Hydrogels based on natural polymers have lightened the path of novel drug delivery systems, wound healing, and tissue engineering fields because they are renewable, non-toxic, biocompatible, and biodegradable. Furthermore, applying modified hydrogels can upgrade their biological activity. Herein, Chitosan (CS) was used to create a hydrogel using terephthaloyl thiourea as a cross-linker. Silk fibroin (SF) and carbon nitride (CN) were added to the hydrogel to enhance its strength and biocompatibility. Finally, CS hydrogel/SF/CN was in situ magnetized using Fe3O4 magnetic nanoparticles (MNPs) and manufactured as a nanobiocomposite for improved hyperthermia. The structural properties of the nanobiocomposite were assessed using several analytical techniques, including VSM, FTIR, TGA, EDX, XRD, and FESEM. The saturation magnetization of this magnetic nanocomposite was 23.94 emu/g. The hemolytic experiment on the nanobiocomposite resulted in ca. 98 % cell survival, with a hemolysis rate of 1.69 %. Anticancer property is confirmed by a 20.0 % reduction in cell viability of BT549 cells at 1.75 mg/mL concentration compared to 0.015 mg/mL. The nanocomposite is non-toxic to the human embryonic kidney cell line (HEK293T), indicating its potential for biomedical applications. Finally, the magnetic nanocomposite's hyperthermia behavior was examined using a specific absorption rate (SAR), achieving the highest value of 47.44 W/g at 200.0 kHz. When subjected to an alternating magnetic field, the nanobiocomposite may perform well in hyperthermia therapy. These results indicate that the magnetic nanobiocomposite has the potential to perform well in hyperthermia therapy when subjected to an alternating magnetic field.

Hyperthermia and biological investigation of a novel magnetic nanobiocomposite based on acacia gum-silk fibroin hydrogel embedded with poly vinyl alcohol

The design and synthesis of biocompatible nanostructures for biomedical applications are considered vital challenges. Herein, a nanobiocomposite based on acacia hydrogel, natural silk fibroin protein, and synthetic protein fibers of polyvinyl alcohol was fabricated and magnetized with iron oxide nanoparticles (Fe3O4 MNPs). The structural properties of the hybrid nanobiocomposite were investigated by essential analyses such as Fourier Transform Infrared Spectrometer (FTIR), Field emission scanning electron microscopy (FE-SEM), and X-ray powder diffraction)XRD(analyses, Thermogravimetric and Differential thermogravimetric analysis (TGA-DTG), Vibrating-sample magnetometry (VSM), and Energy Dispersive X-Ray Analysis (EDX). The biological activities and functional properties of the prepared magnetic nanobiocomposite were studied. Results proved that this nanobiocomposite is non-toxic to the healthy HEK293T cell line. In addition, the synthesized nanobiocomposite showed an approximately 22 % reduction in cell viability of BT549 cells after 72 h. All results confirmed the anti-cancer properties of nanobiocomposite against breast cancer cell lines. Therefore, the prepared nanobiocomposite is an excellent material that can use for in-vivo application. Finally, the hyperthermia application was evaluated for this nanobiocomposite. The SAR was measured 93.08 (W/g) at 100 kHz.

l-Arginine-Loaded Oxidized Isabgol/Chitosan-Based Biomimetic Composite Scaffold Accelerates Collagen Synthesis, Vascularization, and Re-epithelialization during Wound Healing in Diabetic Rats

Impaired wound healing in diabetic wounds is common due to infection, inflammation, less collagen synthesis, and vascularization. Diabetic wound healing in patients is still a challenge and needs an ideal wound dressing to treat and manage diabetic wounds. Herein, an efficacious wound dressing biomaterial was fabricated by cross-linking oxidized isabgol (Oisab) and chitosan (Cs) via trisodium trimetaphosphate and Schiff base bonds. l-Arginine (l-Arg) was incorporated as a bioactive substance in the Oisab + Cs scaffold to promote cell adhesion, cell proliferation, collagen synthesis, and vascularization. The fabricated scaffolds showed microporous networks in the scanning electron microscopy analysis. The scaffold also possessed excellent hemocompatibility. In vitro studies using fibroblasts (L929 and human dermal fibroblast cells) confirmed the cytocompatibility of these scaffolds. The results of the in vivo chicken chorioallantoic membrane assay confirmed the proangiogenic activity of the Oisab + Cs + l-Arg scaffolds. The wound-healing potential of these scaffolds was studied in streptozotocin-induced diabetic rats. This in vivo study showed that the period of epithelialization in the Oisab + Cs + l-Arg scaffold-treated wounds was 21.67 ± 1.6 days, which was significantly faster than the control (30.33 ± 2.5 days). Histological and immunohistochemical studies showed that the Oisab + Cs + l-Arg scaffolds significantly accelerated the rate of wound contraction by reducing inflammation, improving collagen synthesis, and promoting neovascularization. These findings suggest that the Oisab + Cs + l-Arg scaffolds could be beneficial in treating diabetic wounds in clinical applications.

Potential use of extracted flax seed mucilage in the construction of macroporous cryo-scaffolds

Mucilage is a natural source of polysaccharides that has recently attracted attention for use in biomaterial production. It attracts attention with its easy and fast extraction, biocompatibility, high water retention capacity, and biodegradability. Although there are studies on the characterization of mucilage obtained from different plant sources, the interaction of this polymer with other polymers and its potential to form new biomaterials have not yet been sufficiently investigated. Based on this, in this study, the potential of mucilage extracted from flaxseed for the production of cryogels for tissue engineering applications was demonstrated. Firstly, yield, basic physicochemical properties, morphology, and surface charge-dependent isoelectric point determination studies were carried out for the characterization of the extracted mucilage. The successful preparation of mucilage was evaluated for the construction of cryo-scaffolds and 3D, spongy, and porous structures were obtained in the presence of chitosan and polyvinyl alcohol polymers. A heterogeneous morphology with interconnected macro and micro porosity in the range of approximately 85-115 m pore diameter was exhibited. Due to the high hydrophilic structure of the mucilage, which is attached to the structure with weak hydrogen bonds, the contact angle values of the scaffolds were obtained below 80° and they showed the ability to absorb 1000 times their dry weight in approximately 30 min. As a preliminary optimization study for the evaluation of mucilage in cryogel formation, this work introduced a new construct to be developed as wound dressing scaffold for deep and chronic wounds.

In Situ Growth of COF/PVA-Carrageenan Hydrogel Using the Impregnation Method for the Purpose of Highly Sensitive Ammonia Detection

Flexible ammonia (NH3) gas sensors have gained increasing attention for their potential in medical diagnostics and health monitoring, as they serve as a biomarker for kidney disease. Utilizing the pre-designable and porous properties of covalent organic frameworks (COFs) is an innovative way to address the demand for high-performance NH3 sensing. However, COF particles frequently encounter aggregation, low conductivity, and mechanical rigidity, reducing the effectiveness of portable NH3 detection. To overcome these challenges, we propose a practical approach using polyvinyl alcohol-carrageenan (κPVA) as a template for in the situ growth of two-dimensional COF film and particles to produce a flexible hydrogel gas sensor (COF/κPVA). The synergistic effect of COF and κPVA enhances the gas sensing, water retention, and mechanical properties. The COF/κPVA hydrogel shows a 54.4% response to 1 ppm NH3 with a root mean square error of less than 5% and full recovery compared to the low response and no recovery of bare κPVA. Owing to the dual effects of the COF film and the particles anchoring the water molecules, the COF/κPVA hydrogel remained stable after 70 h in atmospheric conditions, in contrast, the bare κPVA hydrogel was completely dehydrated. Our work might pave the way for highly sensitive hydrogel gas sensors, which have intriguing applications in flexible electronic devices for gas sensing.

Recent advances on biomedical applications of gellan gum: A review

Gellan gum (GG) has attracted considerable attention as a versatile biopolymer with numerous potential biological applications, especially in the fields of tissue engineering, wound healing, and cargo delivery. Due to its distinctive characteristics like biocompatibility, biodegradability, nontoxicity, and gel-forming ability, GG is well-suited for these applications. This review focuses on recent research on GG-based hydrogels and biocomposites and their biomedical applications. It discusses the incorporation of GG into hydrogels for controlled drug release, its role in promoting wound healing processes, and its potential in tissue engineering for various tissues including bone, retina, cartilage, vascular, adipose, and cardiac tissue. It provides an in-depth analysis of the latest findings and advancements in these areas, making it a valuable resource for researchers and professionals in these fields.

Limbal stem cells carried by a four-dimensional -printed chitosan-based scaffold for corneal epithelium injury in diabetic rabbits

Methods: Herein, we obtained and characterized deltaN p63- and adenosine triphosphate-binding cassette subfamily G member 2-expressing limbal stem cells (LSCs). Chitosan and carboxymethyl chitosan (CTH) were cross-linked to be an in situ thermosensitive hydrogel (ACH), which was printed through four-dimensional (4D) printing to obtain a porous carrier with uniform pore diameter (4D-CTH). Rabbits were injected with alloxan to induce diabetes mellitus (DM). Following this, the LSC-carrying hydrogel was spread on the surface of the cornea of the diabetic rabbits to cure corneal epithelium injury. Results: Compared with the control group (LSCs only), rapid wound healing was observed in rabbits treated with LSC-carrying 4D-CTH. Furthermore, the test group also showed better corneal nerve repair ability. The results indicated the potential of LSC-carrying 4D-CTH in curing corneal epithelium injury. Conclusion: 4D-CTH holds potential as a useful tool for studying regenerative processes occurring during the treatment of various diabetic corneal epithelium pathologies with the use of stem cell-based technologies.

3D printing of heart valves

3D printing technologies have the potential to revolutionize the manufacture of heart valves through the ability to create bespoke, complex constructs. In light of recent technological advances, we review the progress made towards 3D printing of heart valves, focusing on studies that have utilised these technologies beyond manufacturing patient-specific moulds. We first overview the key requirements of a heart valve to assess functionality. We then present the 3D printing technologies used to engineer heart valves. By referencing International Organisation for Standardisation (ISO) Standard 5840 (Cardiovascular implants - Cardiac valve prostheses), we provide insight into the achieved functionality of these valves. Overall, 3D printing promises to have a significant positive impact on the creation of artificial heart valves and potentially unlock full complex functionality.

Silk fibroin-based dressings with antibacterial and anti-inflammatory properties

Silk fibroin is a fibrillar protein obtained from arthropods such as mulberry and non-mulberry silkworms. Silk fibroin has been used as a dressing in wound treatment for its physical, chemical, mechanical, and biological properties. This systematic review analyzed studies from PubMed, Web of Science, and Scopus databases to identify the molecules preferred for functionalizing silk fibroin-based dressings and to describe their mechanisms of exhibiting anti-inflammatory and antibacterial properties. The analysis of the selected articles allowed us to classify the dressings into different conformations, such as membranes, films, hydrogels, sponges, and bioadhesives. The incorporation of various molecules, including antibiotics, natural products, peptides, nanocomposites, nanoparticles, secondary metabolites, growth factors, and cytokines, has allowed the development of dressings that promote wound healing with antibacterial and immunomodulatory properties. In addition, silk fibroin-based dressings have been established to have the potential to regenerate wounds such as venous ulcers, arterial ulcers, diabetic foot, third-degree burns, and neoplastic ulcers. Evaluation of the efficacy of silk fibroin-based dressings in tissue engineering is an area of great activity that has shown significant advances in recent years.

Nanogel-based composites for bacterial antibiofilm activity: advances, challenges, and prospects

Nano-based approaches, particularly nanogels, have recently emerged as a potential strategy for combating biofilm-related infections. Their exceptional characteristics including biocompatibility, biodegradability, stability, high water content, stimuli-responsiveness, and their nano size (which enables their penetration into biofilms) make nanogels a promising technology in the biomedical field. However, exploring nanogels for biofilm treatment remains in its early stages. This review examined the status of nanogels application for the treatment of bacterial biofilms. Recent investigations studied nanogels derived from natural polymers like chitosan (CS), hyaluronic acid (HA), and alginate, among others, for eliminating and inhibiting biofilms. These nanogels were utilized as carriers for diverse antibiofilm agents, encompassing antibiotics, antimicrobial peptides, natural extracts, and nanoparticles. Utilizing mechanisms like conventional antibody-mediated pathways, photodynamic therapy, photothermal therapy, chemodynamic therapy, and EPS degradation, these nanogels effectively administered antibiofilm drugs, exhibiting efficacy across several bacterial strains, notably Staphylococcus aureus (S. aureus), Pseudomonas aeruginosa (P. aeruginosa), and Escherichia coli (E. coli), among others. Despite showing promise, nanogels remain relatively underexplored in biofilm treatment. This review concludes that research gaps are still present in biofilm treatment processes including (i) a better understanding of the stimuli-responsive behaviors of nanogels, (ii) active targeting strategies, and (iii) the narrow spectrum of antibiofilm agents loaded into nanogels. Hence, future studies could be directed towards the following elements: the exploration of multi-strain biofilms rather than single-strain biofilms, other endogenous and exogenous stimuli to trigger drug release, active targeting mechanisms, a broader range of antibiofilm agents when employing nanogels, and fostering more comprehensive and reliable biofilm treatment strategies. This review found that there are currently several research gaps as well in the use of nanogels for biofilm therapy, and these include: (i) very limited exogenous and endogenous stimuli were explored to trigger drug release from nanogels, (ii) the active targeting strategies were not explored, (iii) a very narrow spectrum of antibiofilm agents was loaded into nanogels, and (iv) only biofilms of single strains were investigated.

In Vitro and In Vivo Evaluation of Chitosan/HPMC/Insulin Hydrogel for Wound Healing Applications

Treatment of chronic wounds is challenging, and the development of different formulations based on insulin has shown efficacy due to their ability to regulate oxidative stress and inflammatory reactions. The formulation of insulin with polysaccharides in biohybrid hydrogel systems has the advantage of synergistically combining the bioactivity of the protein with the biocompatibility and hydrogel properties of polysaccharides. In this study, a hydrogel formulation containing insulin, chitosan, and hydroxypropyl methyl cellulose (Chi/HPMC/Ins) was prepared and characterized by FTIR, thermogravimetric, and gel point analyses. The in vitro cell viability and cell migration potential of the Chi/HPMC/Ins hydrogel were evaluated in human keratinocyte cells (HaCat) by MTT and wound scratch assay. The hydrogel was applied to excisional full-thickness wounds in diabetic mice for twenty days for in vivo studies. Cell viability studies indicated no cytotoxicity of the Chi/HPMC/Ins hydrogel. Moreover, the Chi/HPMC/Ins hydrogel promoted faster gap closure in the scratch assay. In vivo, the wounds treated with the Chi/HPMC/Ins hydrogel resulted in faster wound closure, formation of a more organized granulation tissue, and hair follicle regeneration. These results suggest that Chi/HPMC/Ins hydrogels might promote wound healing in vitro and in vivo and could be a new potential dressing for wound healing.

Preparation and characterization of a jelly fig (Ficus awkeotsang Makino) polysaccharide-based bioactive 3D scaffold for improved vascularization and skin tissue engineering applications

Jelly fig polysaccharides (JFP) were extracted from Ficus awkeotsang Makino achenes. The yield of JFP was approximately 10-15 %. FT-IR spectrum of the extracted JFP confirmed that it was made of low methoxyl pectin (LMP). 3D scaffolds of JFP (JFP scaffold) were fabricated using ionic crosslinking of 2 % (w/v) JFP solution with Ca2+ ions and freeze-drying. The JFP scaffold showed 73.46 ± 1.97 % porosity and a 12-fold swelling capacity. The porous morphology was also observed in SEM micrographs. JFP scaffolds were completely degraded in 14 days when incubated in 1 mg/mL lysozyme solution, compared to the 50 % degradation observed in PBS alone. The antioxidant activity of the JFP and JFP scaffold was approximately 40 %. The hemolytic assay of the JFP scaffold showed <5 % (3.0 ± 0.4) RBC lysis. The cytocompatibility of the JFP scaffold was evaluated using L929 mouse fibroblasts and human dermal fibroblasts (HDF). The in vitro studies using L929 cells showed that the JFP scaffold is cytocompatible. HDF cells cultured in the presence of JFP scaffolds show a higher fold cell viability, proliferation, and migration. Collagen expression and deposition were also studied, and no significant changes occurred with JFP scaffold treatment. In vivo CAM assay showed an increase in the number and thickness of blood vessels by 1.185-fold and 1.19-fold, respectively. These results confirm the angiogenic property of the JFP scaffold. These biocompatible and bioactive properties of the JFP scaffold could be beneficial for tissue engineering and regenerative medicine applications.

Nanohybrid dual-network chitosan-based hydrogels: Synthesis, characterization, quicken infected wound healing by angiogenesis and immune-microenvironment regulation

Infectious wounds are difficult to heal because of vascular damage and immune imbalance. The multi-functional hydrogel dressing can regulate vascular regeneration and immune microenvironment through continuous supply of bioactive ingredients to the wound site, which can effectively accelerate the healing speed of infected wounds. In this work, a multifunctional dual-network hydrogel (QCMOD) with good injectability, stability, self-healing and adhesion was designed by combining methacrylic anhydride-modified quaternized chitosan (QCM) with oxidized dextran (OD) via Schiff base reaction and photo-crosslinked polymerization. Subsequently, MgO/Icariin composite nanoparticles with icariin coating were prepared and loaded in QCMOD hydrogel to establish nanohybrid dual-network chitosan-based hydrogels (QCMOD@MI), which possessed a controlled release of Mg2+ and icariin as well as the ability of guiding physiological behavior in wound healing progress. In vitro results showed the nanohybrid hydrogel reduced bacterial infection and possessed multiple physiological functions including promoting cell migration, angiogenesis and reducing secretion of inflammatory factors. In vivo, the nanohybrid hydrogel showed excellent pro-healing abilities for infected full-thickness wounds by reducing bacterial infections and improving the microenvironment of ischemia and inflammation. This study provides a new paradigm for the design of multifunctional bioactive hydrogels and the obtained hydrogel is expected to become a new type of functional dressing.

Functional modification of silk fibroin from silkworms and its application to medical biomaterials: A review

Silk fibroin (SF) from the silkworm Bombyx mori is a fibrous protein identified as a widely suitable biomaterial due to its biocompatibility, tunable degradation, and mechanical strength. Various modifications of SF protein can give SF fibers new properties and functions, broadening their applications in textile and biomedical industries. A diverse array of functional modifications on various forms of SF has been reported. In order to provide researchers with a more systematic understanding of the types of functional modifications of SF protein, as well as the corresponding applications, we comprehensively review the different types of functional modifications, including transgenic modification, modifications with chemical groups or biologically active substance, cross-linking and copolymerization without chemical reactions, their specific modification methods and applications. Furthermore, recent applications of SF in various medical biomaterials are briefly discussed.

Importance of a nano-sized molybdenum composite synthesized using a microwave oven in the sorption enhancement of Au(iii) from the aqueous phase

Sorption and reduction of Au(iii) by CS-MoCOM-Th on different scales.

Chitosan nanocomposite for tissue engineering and regenerative medicine: A review

Regenerative medicine and tissue engineering have emerged as a multidisciplinary promising field in the quest to address the limitations of traditional medical approaches. One of the key aspects of these fields is the development of such types of biomaterials that can mimic the extracellular matrix and provide a conducive environment for tissue regeneration. In this regard, chitosan has played a vital role which is a naturally derived linear bi-poly-aminosaccharide, and has gained significant attention due to its biocompatibility and unique properties. Chitosan possesses many unique physicochemical properties, making it a significant polysaccharide for different applications such as agriculture, nutraceutical, biomedical, food, nutraceutical, packaging, etc. as well as significant material for developing next-generation hydrogel and bio-scaffolds for regenerative medicinal applications. Moreover, chitosan can be easily modified to incorporate desirable properties, such as improved mechanical strength, enhanced biodegradability, and controlled release of bioactive molecules. Blending chitosan with other polymers or incorporating nanoparticles into its matrix further expands its potential in tissue engineering applications. This review summarizes the most recent studies of the last 10 years based on chitosan, blends, and nanocomposites and their application in bone tissue engineering, hard tissue engineering, dental implants, dental tissue engineering, dental fillers, and cartilage tissue engineering.

Synthesis of curcuma longa doped cellulose grafted hydrogel for catalysis, bactericidial and insilico molecular docking analysis

Curcumin (diferuloylmethane), the primary curcuminoid in turmeric rhizome, has been acknowledged as a bioactive compound for numerous pharmacological activities. Nonetheless, the hydrophobic nature, rapid metabolism, and physicochemical and biological instability of this phenolic compound correspond to its poor bioavailability. So, recent scientific advances have found many components and strategies for enhancing the bioavailability of curcumin with the inclusion of biotechnology and nanotechnology to address its existing limitations. Therefore, In this study, copolymerized aqua-gel was synthesized by graft polymerization of poly-acrylic acid (P-AA) on cellulose nanocrystals (CNC), after that Curcuma longa (Cur) was incorporated as dopant (5, 10, 15, and 25 mg) in hydrogel (Cur/C-P) as a stabilizing agent for evaluation of bacterial potential and sewage treatment. The antioxidant tendency of 25 mg Cur/C-P was much higher (72.21 %) than other samples and displayed a catalytic activity of up to 93.89 % in acidic conditions and optimized bactericidal inclinations toward gram-positive bacterial strains. Furthermore, ligand binding was conducted against targeted protein enoyl-[acylcarrier-protein] reductase (FabI) enzyme to comprehend the putative mechanism of microbicidal action of CNC-PAA (CP), Cur/C-P, and curcumin. Our outcomes suggest that 25 mg Cur/C-P hydrogels are plausible sources for hybrid, multifunctional biological activity.

Magnetic xanthan gum-silk fibroin hydrogel: A nanocomposite for biological and hyperthermia applications

A magnetic xanthan hydrogel/silk fibroin nanobiocomposite (XG hydrogel/SF/Fe3O4) was designed, fabricated, and characterized using analyzing methods such as FT-IR, EDX, FE-SEM, XRD, TGA, and VSM to evaluate the exact structure of product nanobiocomposite. The FE-SEM images reveal the presence of spherical shapes exhibiting a narrow size range and homogeneous distribution, measuring between 30 and 35 nm in diameter. The VSM analysis demonstrates the superparamagnetic properties of the XG hydrogel/SF/Fe3O4 nanobiocomposite, exhibiting a magnetic saturation of 54 emu/g at room temperature. The biological response of the nanobiocomposite scaffolds was assessed through cell viability and red blood cell hemolytic assays. MCF10A cells were exposed to a concentration of 1.75 mg/mL of the nanobiocomposite, and after 2 and 3 days, the cell viability was found to be 96.95 % and 97.02 %, respectively. The hemolytic effect was nearly 0 % even at higher concentrations (2 mg/mL). Furthermore, the magnetic nanobiocomposite showed excellent potential for hyperthermia applications, with a maximum specific absorption rate of 7 W/g for 1 mg/mL of the sample under a magnetic field in different frequencies (100, 200, 300, and 400 MHz) and 5 to 20 min time intervals.

Design and fabrication of a magnetic nanobiocomposite based on flaxseed mucilage hydrogel and silk fibroin for biomedical and in-vitro hyperthermia applications

In this research work, a magnetic nanobiocomposite is designed and presented based on the extraction of flaxseed mucilage hydrogel, silk fibroin (SF), and Fe3O4 magnetic nanoparticles (Fe3O4 MNPs). The physiochemical features of magnetic flaxseed mucilage hydrogel/SF nanobiocomposite are evaluated by FT-IR, EDX, FE-SEM, TEM, XRD, VSM, and TG technical analyses. In addition to chemical characterization, given its natural-based composition, the in-vitro cytotoxicity and hemolysis assays are studied and the results are considerable. Following the use of highest concentration of magnetic flaxseed mucilage hydrogel/SF nanobiocomposite (1.75 mg/mL) and the cell viability percentage of two different cell lines including normal HEK293T cells (95.73%, 96.19%) and breast cancer BT549 cells (87.32%, 86.9%) in 2 and 3 days, it can be inferred that this magnetic nanobiocomposite is biocompatible with HEK293T cells and can inhibit the growth of BT549 cell lines. Besides, observing less than 5% of hemolytic effect can confirm its hemocompatibility. Furthermore, the high specific absorption rate value (107.8 W/g) at 200 kHz is generated by a determined concentration of this nanobiocomposite (1 mg/mL). According to these biological assays, this magnetic responsive cytocompatible composite can be contemplated as a high-potent substrate for further biomedical applications like magnetic hyperthermia treatment and tissue engineering.

State of the art on the separation and purification of proteins by magnetic nanoparticles

The need for excellent, affordable, rapid, reusable and biocompatible protein purification techniques is justified based on the roles of proteins as key biomacromolecules. Magnetic nanomaterials nowadays have become the subject of discussion in proteomics, drug delivery, and gene sensing due to their various abilities including rapid separation, superparamagnetism, and biocompatibility. These nanomaterials also referred to as magnetic nanoparticles (MNPs) serve as excellent options for traditional protein separation and analytical methods because they have a larger surface area per volume. From ionic metals to carbon-based materials, MNPs are easily functionalized by modifying their surface to precisely recognize and bind proteins. This review excavates state-of-the-art MNPs and their functionalizing agents, as efficient protein separation and purification techniques, including ionic metals, polymers, biomolecules, antibodies, and graphene. The MNPs could be reused and efficaciously manipulated with these nanomaterials leading to highly improved efficiency, adsorption, desorption, and purity rate. We also discuss the binding and selectivity parameters of the MNPs, as well as their future outlook. It is concluded that parameters like charge, size, core-shell, lipophilicity, lipophobicity, and surface energy of the MNPs are crucial when considering protein selectivity, chelation, separation, and purity.

Fabrication of chitosan/phenylboronic acid/SiO2 hydrogel composite silk fabrics for enhanced adsorption and controllable release on luteolin

Due to the growing demand for self-health and safety, eco-friendly health textile products with natural colors and pharmacological functionalities have gained considerable popularity. Rapid adsorption and controlled release of active molecules are important issues for functional health textiles. In this study, a functionalized chitosan-based hydrogel composite silk fabric was prepared using chitosan, 3-carboxyphenylboronic acid, and 3-(2, 3-epoxypropyl oxygen) propyl silane by dip-pad and vacuum freeze-drying techniques. The results showed that the incorporation of chitosan/phenylboronic/SiO2 hydrogel into silk fibers improved the UV protection capacity, mechanical properties, and adsorption properties of silk fabrics. The effects of various parameters on the luteolin adsorption properties of silk fabrics were discussed, including metal salt types, salt dosage, pH value, dyeing temperature, initial luteolin concentration, and dyeing time. Under the dyeing temperature of 60 °C and pH of 6.8, the luteolin exhaustion of the composite silk was more than that of the untreated silk, and the adsorption process followed the quasi-second-order kinetic model and the Langmuir adsorption isotherm model. Furthermore, the luteolin-dyed composite silk materials exhibited strong antioxidant activity and controllable release behavior with various pH levels. The as-prepared chitosan-hydrogel composite silk could be a promising material for the sustained release of drugs in medical and healthcare textiles.

Preparation of imidazole acids grafted chitosan with enhanced antioxidant, antibacterial and antitumor activities

Herein, imidazole acids grafted chitosan derivatives were synthesized, including HACC, HACC derivatives, TMC, TMC derivatives, amidated chitosan and amidated chitosan bearing imidazolium salts. The prepared chitosan derivatives were characterized by FT-IR and ¹H NMR. The tests evaluated the biological antioxidant, antibacterial, and cytotoxic activities of chitosan derivatives. The antioxidant capacity (DPPH radical, superoxide anion radical and hydroxyl radical) of chitosan derivatives was 2.4-8.3 times higher than that of chitosan. The antibacterial capacity against E. coli and S. aureus of cationic derivatives (HACC derivatives, TMC derivatives, and amidated chitosan bearing imidazolium salts) was more active than only imidazole-chitosan (amidated chitosan). In particular, the inhibition effect of HACC derivatives on E. coli was 15.625 μg/mL. Moreover, the series of chitosan derivatives bearing imidazole acids showed certain activity against MCF-7 and A549 cells. The present results suggest that the chitosan derivatives in this paper seem to be promising carrier materials for use in drug delivery systems.

Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions

Three-dimensional (3D) printing plays an important role in cardiovascular disease through the use of personalised models that replicate the normal anatomy and its pathology with high accuracy and reliability. While 3D printed heart and vascular models have been shown to improve medical education, preoperative planning and simulation of cardiac procedures, as well as to enhance communication with patients, 3D bioprinting represents a potential advancement of 3D printing technology by allowing the printing of cellular or biological components, functional tissues and organs that can be used in a variety of applications in cardiovascular disease. Recent advances in bioprinting technology have shown the ability to support vascularisation of large-scale constructs with enhanced biocompatibility and structural stability, thus creating opportunities to replace damaged tissues or organs. In this review, we provide an overview of the use of 3D bioprinting in cardiovascular disease with a focus on technologies and applications in cardiac tissues, vascular constructs and grafts, heart valves and myocardium. Limitations and future research directions are highlighted.

A novel nanocomposite containing zinc ferrite nanoparticles embedded in carboxymethylcellulose hydrogel plus carbon nitride nanosheets with multifunctional bioactivity

A novel and biologically active nanobiocomposite is synthesized based on carbon nitride nanosheet (g-C3N4) based carboxymethylcellulose hydrogels with embedded zinc ferrite nanoparticles. Physical-chemical aspects, morphological properties, and their multifunctional biological properties have been considered in the process of evaluation of the synthesized structure. The hydrogels' compressive strength and compressive modulus are 1.98 ± 0.03 MPa and 3.46 ± 0.05 MPa, respectively. Regarding the biological response, it is shown that the nanobiocomposite is non-toxic and biocompatible, and hemocompatible (with Hu02 cells). In addition, the developed material offers a suitable antibacterial activity for both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli).

Concurrent Reduction and Stabilization of Graphene Oxide Dispersion by Silk-Inspired Polymer

Silk, a popular biomaterial, is used as a greener alternative of toxic reducing agent in biocompatible graphene synthesis. However, silk often forms gel uncontrollably due to its heavy-chain molecular weight and faces significant challenges in the reduction, stabilization, and dispersion process of graphene. In this contribution, we report a rapid chemical synthesis approach for a low-molecular-weight silk-inspired polymer via ring-opening and microwave-assisted Diels-Alder-aided step-growth polymerizations. This synthetic polymer with periodic sequences of hydrophilic and hydrophobic moieties not only reduces graphene oxide efficiently but also enhances the dispersibility of hydrophobic reduced graphene oxide in aqueous media.

Physical dual-network photothermal antibacterial multifunctional hydrogel adhesive for wound healing of drug-resistant bacterial infections synthesized from natural polysaccharides

Wound-healing of drug-resistant bacterial infections has always been a clinical challenge. The design and development of effective and economically safe wound dressings with antimicrobial activity and healing-promoting properties is highly desirable, especially in the context of wound-infections. Herein, we designed a physical dual-network multifunctional hydrogel adhesive based on polysaccharide material for the treatment of full-thickness skin defects infected with multidrug-resistant bacteria. The hydrogel utilized ureido-pyrimidinone (UPy)-modified Bletilla striata polysaccharide (BSP) as the first physical interpenetrating network for providing some brittleness and rigidity; and then branched macromolecules formed after cross-linking Fe³⁺ with dopamine-conjugated di-aldehyde-hyaluronic acid as the second physical interpenetrating network for providing some flexibility and elasticity. In this system, BSP and hyaluronic acid (HA) are used as synthetic matrix materials to provide strong biocompatibility and wound-healing ability. In addition, ligand cross-linking of catechol-Fe³⁺ and quadrupole hydrogen-bonding cross-linking of UPy-dimer can form a highly dynamic physical dual-network structure, which imparts good rapid self-healing, injectability, shape-adaptation, NIR/pH responsiveness, high tissue-adhesion and mechanical properties of this hydrogel. Meanwhile, bioactivity experiments demonstrated that the hydrogel also possesses powerful antioxidant, hemostatic, photothermal-antibacterial and wound-healing effects. In conclusion, this functionalized hydrogel is a promising candidate for clinical treatment of full-thickness bacteria-stained wound dressing materials.

Graphene oxide reinforced chitosan/polyvinyl alcohol antibacterial coatings on stainless steel surfaces exhibit superior bioactivity without human cell cytotoxicity

The study proposes an alternative therapeutics to diminish bacterial attachment in biomedical implants by modifying their surface with passive coatings. A uniform, thin-film of chitosan/polyvinyl alcohol/graphene oxide (CS/PVA/GO) was coated on 316 L stainless steel (SS) surface through spread casting followed by solvent evaporation. The abundant anchoring sites available at macromolecular interfaces of chitosan/PVA matrix facilitated a smooth, dense loading of GO. The effect of GO content on physicochemical features, antibacterial potential, and biocompatibility of coatings was thoroughly studied. The hybrid films displayed good adhesion behavior, and UV-protection ability with desired mechanical and thermal stability when coated on SS surface. Coatings manifested a 1.5-1.7 fold rise in antibacterial efficacy against Staphylococcus epidermidis and Staphylococcus aureus and exhibited a permanent biocidal response after 6 h of contact-active behaviour. We investigated a 3-fold generation of reactive oxygen species as the predominant antibacterial mechanism, which diminishes bacterial integrity by inducing protein leakage (8.5-9 fold higher) and suppressing respiratory chain activity as two secondary mechanisms. All coatings with varying GO content appeared non-haemolytic (<2%) with ultra-low cytotoxicity (<29.08%) against human hepatocellular carcinoma (HepG2) and peripheral blood mononuclear cells. The degradation rate of coatings in simulated body fluid exhibited a higher stability, indicated by a lower weight loss (69-78%) and a decrease in pH values as the GO content in coatings increased from 0.05 to 0.15 wt%. Such anti-infective coating is a step forward in inhibiting bacterial colonization on SS surfaces to extend its lifespan.

Biomedical applications of chitosan/silk fibroin composites: A review

Natural polymers have been used in the biomedical fields for decades, mainly derived from animals and plants with high similarities with biomacromolecules in the human body. As an alkaline polysaccharide, chitosan (CS) attracts much attention in tissue regeneration and drug delivery with favorable biocompatibility, biodegradation, and antibacterial activity. However, to overcome its mechanical properties and degradation behavior drawbacks, a robust fibrous protein-silk fibroin (SF) was introduced to prepare the CS/SF composites. Not only can CS be combined with SF via the amide and hydrogen bond formation, but also their functions are complementary and tunable with the blending ratio. To further improve the performances of CS/SF composites, natural (e.g., hyaluronic acid and collagen) and synthetic biopolymers (e.g., polyvinyl alcohol and hexanone) were incorporated. Also, the CS/SF composites acted as slow-release carriers for inorganic non-metals (e.g., hydroxyapatite and graphene) and metal particles (e.g., silver and magnesium), which could enhance cell functions, facilitate tissue healing, and inhibit bacterial growth. This review presents the state-of-the-art and future perspectives of different biomaterials combined with CS/SF composites as sponges, hydrogels, membranes, particles, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a multitude of applications.

Magnetized chitosan hydrogel and silk fibroin, reinforced with PVA: a novel nanobiocomposite for biomedical and hyperthermia applications

Herein, a multifunctional nanobiocomposite was designed for biological application, amongst which hyperthermia cancer therapy application was specifically investigated. This nanobiocomposite was fabricated based on chitosan hydrogel (CS), silk fibroin (SF), water-soluble polymer polyvinyl alcohol (PVA) and iron oxide magnetic nanoparticles (Fe3O4 MNPs). CS and SF as natural compounds were used to improve the biocompatibility, biodegradability, adhesion and cell growth properties of the nanobiocomposite that can prepare this nanocomposite for the other biological applications such as wound healing and tissue engineering. Since the mechanical properties are very important in biological applications, PVA polymer was used to increase the mechanical properties of the prepared nanobiocomposite. All components of this nanobiocomposite have good dispersion in water due to the presence of hydrophilic groups such as NH2, OH, and COOH, which is one of the effective factors in increasing the efficiency of hyperthermia cancer therapy. The structural analyzes of the hybrid nanobiocomposite were determined by FT-IR, XRD, EDX, FE-SEM, TGA and VSM. Biological studies such as MTT and hemolysis testing proved that it is hemocompatible and non-toxic for healthy cells. Furthermore, it can cause the death of cancer cells to some extent (20.23%). The ability of the nanobiocomposites in hyperthermia cancer therapy was evaluated. Also, the results showed that it can be introduced as an excellent candidate for hyperthermia cancer therapy.

Reduced graphene oxide-enriched chitosan hydrogel/cellulose acetate-based nanofibers application in mild hyperthermia and skin regeneration

Asymmetric wound dressings have captured researchers' attention due to their ability to reproduce the structural and functional properties of the skin layers. Furthermore, recent studies also report the benefits of using near-infrared (NIR) radiation-activated photothermal therapies in treating infections and chronic wounds. Herein, a chitosan (CS) and reduced graphene oxide (rGO) hydrogel (CS_rGO) was combined with a polycaprolactone (PCL) and cellulose acetate (CA) electrospun membrane (PCL_CA) to create a new NIR-responsive asymmetric wound dressing. The rGO incorporation in the hydrogel increased the NIR absorption capacity and allowed a mild hyperthermy effect, a temperature increase of 12.4 °C when irradiated with a NIR laser. Moreover, the PCL_CA membrane presented a low porosity and hydrophobic nature, whereas the CS_rGO hydrogel showed the ability to provide a moist environment, prevent exudate accumulation and allow gaseous exchanges. Furthermore, the in vitro data demonstrate the capacity of the asymmetric structure to act as a barrier against bacteria penetration as well as mediating a NIR-triggered antibacterial effect. Additionally, human fibroblasts were able to adhere and proliferate in the CS_rGO hydrogel, even under NIR laser irradiation, presenting cellular viabilities superior to 90 %. Altogether, our data support the application of the NIR-responsive asymmetric wound dressings for skin regeneration.

Can dietary magnesium sources and buffer change the ruminal microbiota composition and fermentation of lactating dairy cows?

Magnesium oxide (MgO) is one of the most used Mg supplements in livestock. However, to avoid relying upon only one Mg source, it is important to have alternative Mg sources. Therefore, the objective of this study was to evaluate the effects of the interaction of two Mg sources with buffer use on the ruminal microbiota composition, ruminal fermentation, and nutrient digestibility in lactating dairy cows. Twenty lactating Holstein cows were blocked by parity and days in milk into five blocks with four cows each, in a 2 × 2 factorial design. Within blocks, cows were assigned to one of four treatments: 1) MgO; 2) MgO + Na sesquicarbonate (MgO+); 3) calcium-magnesium hydroxide (CaMgOH); 4) CaMgOH + Na sesquicarbonate (CaMgOH+). For 60 d, cows were individually fed a corn silage-based diet, and treatments were top-dressed. Ruminal fluid was collected via an orogastric tube, for analyses of the microbiota composition, volatile fatty acids (VFA), lactate, and ammonia nitrogen (NH3-N). The microbiota composition was analyzed using V4/16S rRNA gene sequencing, and taxonomy was assigned using the Silva database. Statistical analysis was carried out following the procedures of block design analysis, where block and cow were considered random variables. Effects of Mg source, buffer, and the interaction between Mg Source × Buffer were analyzed through orthogonal contrasts. There was no interaction effect of the two factors evaluated. There was a greater concentration of NH3-N, lactate, and butyrate in the ruminal fluid of cows fed with CaMg(OH)2, regardless of the buffer use. The increase in these fermentation intermediates/ end-products can be explained by an increase in abundance of micro-organisms of the genus Prevotella, Lactobacillus, and Butyrivibrio, which are micro-organisms mainly responsible for proteolysis, lactate-production, and butyrate-production in the rumen, respectively. Also, dietary buffer use did not affect the ruminal fermentation metabolites and pH; however, an improvement of the apparent total tract digestibility of dry matter (DM), organic matter (OM), neutral fiber detergent (NDF), and acid fiber detergent (ADF) were found for animals fed with dietary buffer. In summary, there was no interaction effect of buffer use and Mg source, whereas buffer improved total tract apparent digestibility of DM and OM through an increase in NDF and ADF digestibility and CaMg(OH)2 increased ruminal concentration of butyrate and abundance of butyrate-producing bacteria.

Recent advances in the medical applications of hemostatic materials

Bleeding caused by trauma or surgery is a serious health problem, and uncontrollable bleeding can result in death. Therefore, developing safe, effective, and convenient hemostatic materials is important. Active hemostatic agents currently used to investigate the field of hemostasis are divided into four broad categories: natural polymers, synthetic polymers, inorganic materials, and metal-containing materials. Hemostatic materials are prepared in various forms for wound care applications based on the active ingredients used. These materials include nanofibers, gels, sponges, and nanoparticles. Hemostatic materials find their applications in the field of wound care, and they are also used for hemostasis during malignant tumor surgery. Prompt and effective hemostasis can reduce the possibility of the spread of tumor cells with blood. This review discusses the outcomes of current research conducted in the field and the problems persisting in the field of developing hemostatic materials. The review also presents a platform for the further development of hemostatic materials. Bleeding caused by trauma or surgery is a serious health problem, and uncontrollable bleeding can result in death. Therefore, developing safe, effective, and convenient hemostatic materials is important. Active hemostatic agents currently used to investigate the field of hemostasis are divided into four broad categories: natural polymers, synthetic polymers, inorganic materials, and metal-containing materials. Hemostatic materials are prepared in various forms for wound care applications based on the active ingredients used. These materials include nanofibers, gels, sponges, and nanoparticles. Hemostatic materials find their applications in the field of wound care, and they are also used for hemostasis during malignant tumor surgery. Prompt and effective hemostasis can reduce the possibility of the spread of tumor cells with blood. This review discusses the outcomes of current research conducted in the field and the problems persisting in the field of developing hemostatic materials. The review also presents a platform for the further development of hemostatic materials.