Shear stress affects the architecture and cohesion of Chlorella vulgaris biofilms

Modulation of biofilm growth by shear and fluctuations in turbulent environments

This work investigates the role of shear and turbulent fluctuations on multi-species biofilm growth. The study is mostly motivated by understanding biofouling on microplastics (MPs) in oceanic environments. By increasing particle stickiness, biofilms promote MP aggregation and sinking; therefore, a thorough understanding of this multi-scale process is crucial to improve predictions of the MPs fate. We conducted a series of laboratory experiments using an oscillating-grid system to promote biofilm growth on small plastic surfaces under homogeneous isotropic turbulence with grid Reynolds numbers between 305 and 2220. Two configurations were analyzed: one where plastic samples move along with the grid (shear-dominated) and another one where the samples are kept fixed downstream the grid, thus experiencing turbulence but no mean flow (shear-free). Biofilm formed in all cases in a time scale of days, then the biomass formed on the plastic pieces was carefully measured and analyzed as a function of the turbulence level. The shear-free results were further interpreted using a parsimonious physical model, coupling the nutrient uptake rate within the biofilm (Monod kinetics) with the turbulent diffusion of the surrounding bulk liquid. Results show that: (i) under shear-dominated conditions, the biofilm mass initially grows with turbulence intensity before decaying, presumably due to shear-induced erosion; (ii) in the shear-free experiments, the mass increases monotonically following an enhanced availability of nutrients, and then saturates due to uptake-limited kinetics. This latter behavior is well reproduced by the physical model. Furthermore, a subset of plastic pieces were analyzed with a scanning electron microscope, revealing that turbulence also affects the microscopic configuration of biofilm clusters, increasing their compactness as the amplitude of turbulent fluctuations increases. These results contribute not only to our fundamental understanding of biofilms under flow, but can also inform global models of MP transport in marine environments.

Bacterial species with different nanocolony morphologies have distinct flow-dependent colonization behaviors

Fluid flows are dominant features of many bacterial environments, and flow can often impact bacterial behaviors in unexpected ways. For example, the most common type of cardiovascular infection is heart valve colonization by gram-positive bacteria like Staphylococcus aureus and Enterococcus faecalis (endocarditis). This behavior is counterintuitive because heart valves experience high shear rates that would naively be expected to reduce colonization. To determine whether these bacteria preferentially colonize higher shear rate environments, we developed a microfluidic system to quantify the effect of flow conditions on the colonization of S. aureus and E. faecalis. We find that the preferential colonization in high flow of both species is not specific to heart valves and can be found in simple configurations lacking any host factors. This behavior enables bacteria that are outcompeted in low flow to dominate in high flow. Surprisingly, experimental and computational studies reveal that the two species achieve this behavior via distinct mechanisms. S. aureus grows in cell clusters and produces a dispersal signal whose transport is affected by shear rate. Meanwhile, E. faecalis grows in linear chains whose mechanical properties result in less dispersal in the presence of higher shear force. In addition to establishing two divergent mechanisms by which these bacteria each preferentially colonize high-flow environments, our findings highlight the importance of understanding bacterial behaviors at the level of collective interactions among cells. These results suggest that distinct multicellular nanocolony morphologies have previously unappreciated costs and benefits in different environments, like those introduced by fluid flow.

Effect of biofilm physical characteristics on their susceptibility to antibiotics: impacts of low-frequency ultrasound

Biofilms are highly resistant to antimicrobials, often causing chronic infections. Combining antimicrobials with low-frequency ultrasound (LFU) enhances antimicrobial efficiency, but little is known about the underlying mechanisms. Biofilm physical characteristics, which depend on factors such as growth conditions and age, can have significant effects on inactivation efficiency. In this study, we investigated the susceptibility of Pseudomonas aeruginosa biofilms to tobramycin, with and without LFU treatment. The biofilms were grown under low and high fluid shear to provide different characteristics. Low-shear biofilms exhibited greater thickness, roughness, and porosity and lower density, compared to high-shear biofilms. The biofilm matrix of the high-shear biofilms had a three times higher protein-to-polysaccharide ratio, suggesting greater biofilm stiffness. This was supported by microrheology measurements of biofilm creep compliance. For the low-shear biofilms without LFU, the viability of the biofilms in their inner regions was largely unaffected by the antibiotic after a 2-hour treatment. However, when tobramycin was combined with LFU, the inactivation for the entire biofilm increased to 80% after 2 h. For the high-shear biofilms without LFU, higher LFU intensities were needed to achieve similar inactivation results. Microrheology measurements revealed that changes in biofilm inactivation profiles were closely related to changes in biofilm mechanical properties. Modeling suggests that LFU changes antibiotic diffusivity within the biofilm, probably due to a "decohesion" effect. Overall, this research suggests that biofilm physical characteristics (e.g., compliance, morphology) are linked to antimicrobial efficiency. LFU weakens the biofilm while increasing its diffusivity for antibiotics.

The role of air relative humidity on the wettability of Pseudomonas fluorescens AR11 biofilms

Biofilms are complex porous materials formed by microorganisms, polysaccharides, proteins, eDNA, inorganic matter, and water. They are ubiquitous in various environmental niches and are known to grow at solid-liquid, solid-air and air-liquid interfaces, often causing problems in several industrial and sanitary fields. Their removal is a challenge in many applications and numerous studies have been conducted to identify promising chemical species as cleaning agents. While these substances target specific components of biofilm structure, the role of water content in biofilm, and how it can influence wettability and detergent absorption have been quite neglected in the literature. Estimating water content in biofilm is a challenging task due to its heterogeneity in morphology and chemical composition. In this study, we controlled water content in Pseudomonas fluorescens AR 11 biofilms grown on submerged glass slides by regulating environmental relative humidity after drying. Interfacial properties of biofilm were investigated by measuring wetting of water and soybean oil. The morphology of biofilm structure was evaluated using Confocal Laser Scanning Microscopy and Scanning Electron Microscopy. The results showed that biofilm water content has a significant and measurable effect on its wettability, leading to the hypothesis that a preliminary control of water content can play a crucial role in biofilm removal process.

The effect of light intensity on microalgae biofilm structures and physiology under continuous illumination

The interest by biofilm-based microalgae technologies has increased lately due to productivity improvement, energy consumption reduction and easy harvesting. However, the effect of light, one key factor for system's operation, received less attention than for planktonic cultures. This work assessed the impact of Photon Flux Density (PFD) on Chlorella vulgaris biofilm dynamics (structure, physiology, activity). Microalgae biofilms were cultivated in a flow-cell system with PFD from 100 to 500 [Formula: see text]. In the first stage of biofilm development, uniform cell distribution was observed on the substratum exposed to 100 [Formula: see text] while cell clusters were formed under 500 [Formula: see text]. Though similar specific growth rate in exponential phase (ca. 0.3 [Formula: see text]) was obtained under all light intensities, biofilm cells at 500 [Formula: see text] seem to be ultimately photoinhibited (lower final cell density). Data confirm that Chlorella vulgaris showed a remarkable capability to cope with high light. This was marked for sessile cells at 300 [Formula: see text], which reduce very rapidly (in 2 days) their chlorophyll-a content, most probably to reduce photodamage, while maintaining a high final cell density. Besides cellular physiological adjustments, our data demonstrate that cellular spatial organization is light-dependent.

Microalgal-bacterial biofilms for wastewater treatment: Operations, performances, mechanisms, and uncertainties

Microalgal-bacterial biofilms have been increasingly considered of great potential in wastewater treatment due to the advantages of microalgal-bacterial synergistic pollutants removal/recovery, CO2 sequestration, and cost-effective biomass-water separation. However, such advantages may vary widely among different types of microalgal-bacterial biofilms, as the biofilms could be formed on different shapes and structures of attachment substratum, generating "false hope" for certain systems in large-scale wastewater treatment if the operating conditions and pollutants removal properties are evaluated based on the general term "microalgal-bacterial biofilm". This study, therefore, classified microalgal-bacterial biofilms into biofilms formed on 2D substratum, biofilms formed on 3D substratum, and biofilms formed without substratum (i.e. microalgal-bacterial granular sludge, MBGS). Biofilms formed on 2D substratum display higher microalgae fractions and nutrients removal efficiencies, while the adopted long hydraulic retention times were unacceptable for large-scale wastewater treatment. MBGS are featured with much lower microalgae fractions, most efficient pollutants removal, and acceptable retention times for realistic application, yet the feasibility of using natural sunlight should be further explored. 3D substratum systems display wide variations in operating conditions and pollutants removal properties because of diversified substratum shapes and structures. 2D and 3D substratum biofilms share more common in eukaryotic and prokaryotic microbial community structures, while MGBS biofilms are more enriched with microorganisms favoring EPS production, biofilm formation, and denitrification. The specific roles of stratified extracellular polymeric substances (EPS) in nutrients adsorption and condensation still require in-depth exploration. Nutrients removal uncertainties caused by microalgal-bacterial synergy decoupling under insufficient illumination, limited microbial community control, and possible greenhouse gas emission exacerbation arising from microalgal N2O generation were also indicated. This review is helpful for revealing the true potential of applying various microalgal-bacterial biofilms in large-scale wastewater treatment, and will provoke some insights on the challenges to the ideal state of synergistic pollutants reclamation and carbon neutrality via microalgal-bacterial interactions.

Migration of surface-associated microbial communities in spaceflight habitats

Astronauts are spending longer periods locked up in ships or stations for scientific and exploration spatial missions. The International Space Station (ISS) has been inhabited continuously for more than 20 years and the duration of space stays by crews could lengthen with the objectives of human presence on the moon and Mars. If the environment of these space habitats is designed for the comfort of astronauts, it is also conducive to other forms of life such as embarked microorganisms. The latter, most often associated with surfaces in the form of biofilm, have been implicated in significant degradation of the functionality of pieces of equipment in space habitats. The most recent research suggests that microgravity could increase the persistence, resistance and virulence of pathogenic microorganisms detected in these communities, endangering the health of astronauts and potentially jeopardizing long-duration manned missions. In this review, we describe the mechanisms and dynamics of installation and propagation of these microbial communities associated with surfaces (spatial migration), as well as long-term processes of adaptation and evolution in these extreme environments (phenotypic and genetic migration), with special reference to human health. We also discuss the means of control envisaged to allow a lasting cohabitation between these vibrant microscopic passengers and the astronauts.

The impact of light/dark regimes on structure and physiology of Chlorella vulgaris biofilms

Introduction

Biofilm-based microalgae production technologies offer enormous potential for improving sustainability and productivity. However, the light pattern induced by these technologies is a key concern for optimization.

Methods

In this work, the effects of light/dark cycles on architecture, growth, and physiology of Chlorella vulgaris biofilms were assessed in a millifluidic flow-cell with different time cycles (15 s to 3 min) keeping the average light constant at 100 μmol·m-2·s-1.

Results and discussion

Results showed that photoinhibition can be mitigated by applying a light fraction of 1/3 and a cycle time of 15 s. By contrast, when the cycle time is extended to 90 s and 3 min, photoinhibition is high and photoefficiency dramatically decreases. To cope with light stress, cells acclimate and organize themselves differently in space. A high peak light (500 μmol·m-2·s-1) triggers a stress, reducing cell division and inducing clusters in the biofilm. This work provides guidelines for optimizing rotating microalgae production systems in biofilms and assesses the minimum rotating frequency required to maintain the net growth rate close to that of continuous light of the same average intensity, mitigating photo-inhibition. The overall gain in productivity is then provided by the total surface of the biofilm turning in the illuminated surface area.

A microscale system for in situ investigation of immobilized microalgal cell resistance against liquid flow in the early inoculation stage

In attached microalgae cultivation systems, cell detachment due to fluid hydrodynamic flow is not a subject matter that is commonly looked into. However, this phenomenon is of great relevance to optimizing the operating parameters of algae cultivation and feasible reactor design. Hence, this current work miniaturizes traditional benchtop assays into a microfluidic platform to study the cell detachment of green microalgae, Chlorella vulgaris, from porous substrates during its early cultivation stage under precisely controlled conditions. As revealed by time lapse microscopy, an increase in bulk flow velocity facilitated nutrient transport but also triggered cell detachment events. At a flow rate of 1000 μL min-1 of growth medium for 120 min, the algal cell coverage was up to 5% lower than those at 5 μL min-1 and 50 μL min-1. In static seeding, the evolution of attached cell resistance toward liquid flows was dependent on hydrodynamic zones. The center zone of the microchannel was shown to be a "comfortable zone" of the attached cells to sequester nutrients effectively at lower medium flow rates but there was a profile transition where outlet zones favored cell attachment the most at higher flow rates (1.13 times higher than the center zone for 1000 μL min-1). Besides, computational fluid dynamics (CFD) simulations illustrated that the focusing band varied between cross-sections and depths, while the streamline was the least concentrated along the side walls and bottom plane of the microfluidic devices. It was intriguing to learn that cell detachment was not primarily happening along the symmetry streamline. Insight gained from this study could be further applied in the optimization of operating conditions of attached cultivation systems whilst preserving laminar flow conditions.

Multichannel Microfluidic Platform for Temporal-Spatial Investigation of Niche Roles of Pseudomonas aeruginosa and Escherichia coli within a Dual-Species Biofilm

In natural or man-made environments, microorganisms exist predominantly as biofilms forming surface-associated bacterial communities embedded in extracellular polymeric substances (EPSs). Often, biofilm reactors used for endpoint and disruptive analyses of biofilm are not suitable for periodic observation of biofilm formation and development. In this study, a microfluidic device designed with multiple channels and a gradient generator was used for high-throughput analysis and real-time monitoring of dual-species biofilm formation and development. We compared the structural parameters of monospecies and dual-species biofilms containing Pseudomonas aeruginosa (expressing mCherry) and Escherichia coli (expressing green fluorescent protein [GFP]) to understand the interactions in the biofilm. The rate of biovolume increase of each species in monospecies biofilm (2.7 × 105 μm3) was higher than those in a dual-species biofilm (9.68 × 104 μm3); however, synergism was still observed in the dual-species biofilm due to overall increases in biovolume for both species. Synergism was also observed in a dual-species biofilm, where P. aeruginosa forms a "blanket" over E. coli, providing a physical barrier against shear stress in the environment. The microfluidic chip was useful for monitoring the dual-species biofilm in the microenvironment, indicating that different species in a multispecies biofilm exhibit different niches for the survival of the biofilm community. Finally, we demonstrated that the nucleic acids can be extracted from the dual-species biofilm in situ after biofilm imaging analysis. In addition, gene expression supported that the activation and suppression of different quorum sensing genes resulted in the different phenotype seen in the biofilm. This study showed that the integration of microfluidic device with microscopy analysis and molecular techniques could be a promising tool for studying biofilm structure and gene quantification and expression simultaneously. IMPORTANCE In natural or man-made environments, microorganisms exist predominantly as biofilms forming surface-associated bacterial communities embedded in extracellular polymeric substances (EPSs). Often, biofilm reactors used for endpoint and disruptive analyses of biofilm are not suitable for periodic observation of biofilm formation and development. Here, we demonstrate that a microfluidic device with multiple channels and a gradient generator can be useful for high-throughput analysis and real-time monitoring of dual-species biofilm formation and development. Our study revealed synergism in the dual-species biofilm, where P. aeruginosa forms a "blanket" over E. coli, providing a physical barrier against shear stress in the environment. Furthermore, different species in a multispecies biofilm exhibit different niches for the survival of the biofilm community. This study showed that the integration of microfluidic device with microscopy analysis and molecular techniques could be a promising tool for studying biofilm structure and gene quantification and expression simultaneously.

Development of Antifouling Strategies for Marine Applications

Marine biofouling is an undeniable challenge for aquatic systems since it is responsible for several environmental and ecological problems and economic losses. Several strategies have been developed to mitigate fouling-related issues in marine environments, including developing marine coatings using nanotechnology and biomimetic models, and incorporating natural compounds, peptides, bacteriophages, or specific enzymes on surfaces. The advantages and limitations of these strategies are discussed in this review, and the development of novel surfaces and coatings is highlighted. The performance of these novel antibiofilm coatings is currently tested by in vitro experiments, which should try to mimic real conditions in the best way, and/or by in situ tests through the immersion of surfaces in marine environments. Both forms present their advantages and limitations, and these factors should be considered when the performance of a novel marine coating requires evaluation and validation. Despite all the advances and improvements against marine biofouling, progress toward an ideal operational strategy has been slow given the increasingly demanding regulatory requirements. Recent developments in self-polishing copolymers and fouling-release coatings have yielded promising results which set the basis for the development of more efficient and eco-friendly antifouling strategies.

Evaluation of Biofilm Cultivation Models for Efficacy Testing of Disinfectants against Salmonella Typhimurium Biofilms

Within the European Union, Salmonella is frequently reported in food and feed products. A major route of transmission is upon contact with contaminated surfaces. In nature, bacteria such as Salmonella are often encountered in biofilms, where they are protected against antibiotics and disinfectants. Therefore, the removal and inactivation of biofilms is essential to ensure hygienic conditions. Currently, recommendations for disinfectant usage are based on results of efficacy testing against planktonic bacteria. There are no biofilm-specific standards for the efficacy testing of disinfectants against Salmonella. Here, we assessed three models for disinfectant efficacy testing on Salmonella Typhimurium biofilms. Achievable bacterial counts per biofilm, repeatability, and intra-laboratory reproducibility were analyzed. Biofilms of two Salmonella strains were grown on different surfaces and treated with glutaraldehyde or peracetic acid. Disinfectant efficacy was compared with results for planktonic Salmonella. All methods resulted in highly repeatable cell numbers per biofilm, with one assay showing variations of less than 1 log10 CFU in all experiments for both strains tested. Disinfectant concentrations required to inactivate biofilms were higher compared to planktonic cells. Differences were found between the biofilm methods regarding maximal achievable cell numbers, repeatability, and intra-laboratory reproducibility of results, which may be used to identify the most appropriate method in relation to application context. Developing a standardized protocol for testing disinfectant efficacy on biofilms will help identify conditions that are effective against biofilms.

Nanoparticle Coatings on Glass Surfaces to Prevent Pseudomonas fluorescens AR 11 Biofilm Formation

Microbial colonization of surfaces is a sanitary and industrial issue for many applications, leading to product contamination and human infections. When microorganisms closely interact with a surface, they start to produce an exo-polysaccaridic matrix to adhere to and protect themselves from adverse environmental conditions. This type of structure is called a biofilm. The aim of our work is to investigate novel technologies able to prevent biofilm formation by surface coatings. We coated glass surfaces with melanin-ZnO2, melanin-TiO2, and TiO2 hybrid nanoparticles. The functionalization was performed using cold plasma to activate glass-substrate-coated surfaces, that were characterized by performing water and soybean oil wetting tests. A quantitative characterization of the antibiofilm properties was done using Pseudomonas fluorescens AR 11 as a model organism. Biofilm morphologies were observed using confocal laser scanning microscopy and image analysis techniques were used to obtain quantitative morphological parameters. The results highlight the efficacy of the proposed surface coating to prevent biofilm formation. Melanin-TiO2 proved to be the most efficient among the particles investigated. Our results can be a valuable support for future implementation of the technique proposed here in an extended range of applications that may include further testing on other strains and other support materials.

Dynamic Changes in Biofilm Structures under Dynamic Flow Conditions

Detachment is an important process determining the structure and function of bacterial biofilm, which has significant implications for biogeochemical cycling of elements, biofilm application, and infection control in clinical settings. Quantifying the responses of biofilm structure to hydrodynamics is crucial for understanding biofilm detachment mechanisms in aquatic environments.

A high-throughput integrated biofilm-on-a-chip platform for the investigation of combinatory physicochemical responses to chemical and fluid shear stress

Physicochemical conditions play a key role in the development of biofilm removal strategies. This study presents an integrated, double-layer, high-throughput microfluidic chip for real-time screening of the combined effect of antibiotic concentration and fluid shear stress (FSS) on biofilms. Biofilms of Escherichia coli LF82 and Pseudomonas aeruginosa were tested against gentamicin and streptomycin to examine the time dependent effects of concentration and FSS on the integrity of the biofilm. A MatLab image analysis method was developed to measure the bacterial surface coverage and total fluorescent intensity of the biofilms before and after each treatment. The chip consists of two layers. The top layer contains the concentration gradient generator (CGG) capable of diluting the input drug linearly into four concentrations. The bottom layer contains four expanding FSS chambers imposing three different FSSs on cultured biofilms. As a result, 12 combinatorial states of concentration and FSS can be investigated on the biofilm simultaneously. Our proof-of-concept study revealed that the reduction of E. coli biofilms was directly dependent upon both antibacterial dose and shear intensity, whereas the P. aeruginosa biofilms were not impacted as significantly. This confirmed that the effectiveness of biofilm removal is dependent on bacterial species and the environment. Our experimental system could be used to investigate the physicochemical responses of other biofilms or to assess the effectiveness of biofilm removal methods.

The architecture and metabolic traits of monospecific photosynthetic biofilms studied in a custom flow-through system

Microalgae biofilms have great ecological importance and high biotechnological potential. Nevertheless, an in-depth and combined structural (i.e., the architecture of the biofilm) and physiological characterization of microalgae biofilms is still missing. An approach able to provide the same time physiological and structural information during biofilm growth would be of paramount importance to understand these complex biological systems and to optimize their productivity. In this study, monospecific biofilms of a diatom and a green alga were grown under dynamic conditions in custom flow cells represented by UV/Vis spectroscopic cuvettes. Such flow cells were conceived to characterize the biofilms by several techniques mostly in situ and in a nondestructive way. Physiological traits were obtained by measuring variable chlorophyll a fluorescence by pulse amplitude modulated fluorometry and by scanning the biofilms in a spectrometer to obtain in vivo pigments spectral signatures. The architectural features were obtained by imaging the biofilms with a confocal laser scanning microscopy and an optical coherence tomography. Overall, this experimental setup allowed us to follow the growth of two biofilm-forming microalgae showing that cell physiology is more affected in complex biofilms likely as a consequence of alterations in local environmental conditions.

Understanding photosynthetic biofilm productivity and structure through 2D simulation

We present a spatial model describing the growth of a photosynthetic microalgae biofilm. In this 2D-model we consider photosynthesis, cell carbon accumulation, extracellular matrix excretion, and mortality. The rate of each of these mechanisms is given by kinetic laws regulated by light, nitrate, oxygen and inorganic carbon. The model is based on mixture theory and the behaviour of each component is defined on one hand by mass conservation, which takes into account biological features of the system, and on the other hand by conservation of momentum, which expresses the physical properties of the components. The model simulates the biofilm structural dynamics following an initial colonization phase. It shows that a 75 μm thick active region drives the biofilm development. We then determine the optimal harvesting period and biofilm height which maximize productivity. Finally, different harvesting patterns are tested and their effect on biofilm structure are discussed. The optimal strategy differs whether the objective is to recover the total biofilm or just the algal biomass.

Microalgae have many industrial applications, ranging from aquaculture, pharmaceutics, food industry to green energy. Planktonic cultivation of microalgae is energy-consuming. Growing them under a biofilm form is a new trend with attracting promises. Biofilms are complex heterogeneous ecosystems composed of microorganisms embedded within a self-produced extracellular matrix and stuck to a surface. Most of the studies have focused on bacterial biofilms and knowledge about microalgae biofilms is still very limited. In this paper, we propose a mathematical model describing microalgae biofilm development. We simulate in 1D and 2D the impact of harvesting conditions on biofilm productivity. In agreement with available experimental observations, we find that there exist optimal frequencies and patterns that optimize the productivity. We also show that the optimal conditions differ whether for maximizing the productivity of microalgae or of the whole biofilm.

Biofilm formation under high shear stress increases resilience to chemical and mechanical challenges

The effect that the hydrodynamic conditions under which biofilms are formed has on their persistence is still unknown. This study assessed the behaviour of Pseudomonas fluorescens biofilms, formed on stainless steel under different shear stress (τw) conditions (1, 2 and 4 Pa), to chemical (benzalkonium chloride - BAC, glutaraldehyde - GLUT and sodium hypochlorite - SHC) and mechanical (20 Pa) treatments (alone and combined). The biofilms formed under different τw  showed different structural characteristics. Those formed under a higher τw were invariably more tolerant to chemical and mechanical stresses. SHC was the biocide which caused the highest biofilm killing and removal, followed by BAC. The sequential exposure to biocides and mechanical stress was found to be insufficient for effective biofilm control. A basal layer containing biofilm cells mostly in a viable state remained on the surface of the cylinders, particularly for the 2 and 4 Pa-generated biofilms.

Propelling the practical application of the intimate coupling of photocatalysis and biodegradation system: System amelioration, environmental influences and analytical strategies

The intimate coupling of photocatalysis and biodegradation (ICPB) possesses an enhanced ability of recalcitrant contaminant removal and energy generation, owing to the compact communication between biotic components and photocatalysts during the system operation. The photocatalysts in the ICPB system could dispose of noxious contaminants to relieve the external pressure on microorganisms which could realize the mineralization of the photocatalytic degradation products. However, due to the complex components in the composite system, the mechanism of the ICPB system has not been completely understood. Moreover, the variable environmental conditions would play a significant role in the ICPB system performance. The further development of the ICPB scheme requires clarification on how to reach an accurate understanding of the system condition during the practical application. This review starts by offering detailed information on the system construction and recent progress in the system components' amelioration. We then describe the potential influences of relevant environmental factors on the system performance, and the analytical strategies applicable for comprehending the critical processes during the system operation are further summarized. Finally, we put forward the research gaps in the current system and envision the system's prospective application. This review provides a valuable reference for future researches that are devoted to assessing the environmental disturbance and exploring the reaction mechanisms during the practical application of the ICPB system.

Wetting of Dehydrated Hydrophilic Pseudomonas fluorescens Biofilms under the Action of External Body Forces

Wetting of dehydrated Pseudomonas fluorescens biofilms grown on glass substrates by an external liquid is employed as a means to investigate the complex morphology of these biofilms along with their capability to interact with external fluids. The porous structure left behind after dehydration induces interesting droplet spreading on the external surface and imbibition into pores upon wetting. Static contact angles and volume loss by imbibition measured right upon droplet deposition indicate that biofilms of higher incubation times show a higher porosity and effective hydrophilicity. Furthermore, during subsequent rotation tests, using Kerberos device, these properties dictate a peculiar forced wetting/spreading behavior. As rotation speed increases a long liquid tail forms progressively at the rear part of the droplet, which stays pinned at all times, while only the front part of the droplet depins and spreads. Interestingly, the experimentally determined retention force for the onset of droplet sliding on biofilm external surface is lower than that on pure glass. An effort is made to describe such complex forced wetting phenomena by presenting apparent contact angles, droplet length, droplet shape contours, and edges position as obtained from detailed image analysis.

Influence of light and flow on taxon composition and photosynthesis of marine phototrophic biofilm in photobioreactors

In this study, marine biofilms were cultured in a flow-lane, semi-continuous photobioreactor at different irradiances and flows to evaluate their combined effect on biofilms' phototrophic composition and photosynthetic activity. Taxon richness, evaluated by different microscopy techniques, including transmission and scanning electron microscopy, resulted to be heavily reduced from source communities to mature cultures. The strongest decrease was observed for diatoms, which were overcome by cyanobacteria and green algae over time. Photosynthetic performance was investigated by pulse amplitude modulated fluorescence. Irradiance was the main driver of data distribution of the photosynthetic parameters rel.ETR_max and I_k, while flow rate affected α and ΔF/F_m'. The combination of irradiance and flow rate affected ΔF/F_m' reflecting the photosynthetic performance of the most relatively abundant taxa. Higher ΔF/F_m' was attained when cyanobacteria and green algae were dominating, whilst lower ΔF/F_m' when diatoms occurred in the initial phase of biofilm development.