Field-deployable, rapid diagnostic testing of saliva for SARS-CoV-2

Ultrasensitive detection of intact SARS-CoV-2 particles in complex biofluids using microfluidic affinity capture

Measuring virus in biofluids is complicated by confounding biomolecules coisolated with viral nucleic acids. To address this, we developed an affinity-based microfluidic device for specific capture of intact severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Our approach used an engineered angiotensin-converting enzyme 2 to capture intact virus from plasma and other complex biofluids. Our device leverages a staggered herringbone pattern, nanoparticle surface coating, and processing conditions to achieve detection of as few as 3 viral copies per milliliter. We further validated our microfluidic assay on 103 plasma, 36 saliva, and 29 stool samples collected from unique patients with COVID-19, showing SARS-CoV-2 detection in 72% of plasma samples. Longitudinal monitoring in the plasma revealed our device's capacity for ultrasensitive detection of active viral infections over time. Our technology can be adapted to target other viruses using relevant cell entry molecules for affinity capture. This versatility underscores the potential for widespread application in viral load monitoring and disease management.

A LAMP-CRISPR/Cas12b rapid detection platform for canine parvovirus detection

Canine parvovirus (CPV) is one of the main pathogens causing toxic diarrhea in Chinese dogs, is the cause of large-scale epidemic of dogs, and poses a great threat to the dog industry in China. Rapid, sensitive, and specific CPV testing facilitates the timely diagnosis and treatment of sick dogs. The aim of this study was to build a LAMP-CRISPR/Cas12b platform for CPV detection. The loop mediated isothermal amplification (LAMP) technique was combined with CRISPR-Cas12b analysis to establish a "two-step" and "one-tube" CRISPR/Cas12b rapid CPV method, respectively. The detection system was constructed with specific LAMP primers and single guide RNA (sgRNA) for the highly conserved short fragment of the CPV gene, which could be detected within 1 h without cross-reaction with the other viruses causing canine diarrhea. The detection limits of both "two-step" and "one-tube" CRISPR/Cas12b reactions were 10-1 copies per μL, which was 100 times more sensitive than qPCR and LAMP. In order to achieve point-of-care testing (POCT) of CPV, a one-tube LAMP-CRISPR/Cas12b nucleic acid extraction and detection platform based on magnetic nanoparticle enrichment technology was established to achieve "sample in-result out". The results of this method for simulated samples were compared with those of quantitative real-time PCR; the results showed 100% consistency, and the time was shorter, which could be used to detect the diseased dogs earlier and provide a basis for clinical diagnosis. The LAMP-CRISPR/Cas12b method established in this study provides a sensitive and specific method for rapid detection of CPV, and provides technical support for rapid diagnosis of CPV.

Development of an integrated sample amplification control for salivary point-of-care pathogen testing

BACKGROUND

The COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed.

RESULTS

We developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 min without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples.

SIGNIFICANCE

IACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices.

Engineering of the LAMP-CRISPR/Cas12b platform for Chlamydia psittaci detection

Introduction. Chlamydia psittaci (C. psittaci) is a zoonotic infection, that causes psittacosis (parrot fever) in humans, leading to severe clinical manifestations, including severe pneumonia, adult respiratory distress syndrome, and, in rare cases, death.Gap Statement. Rapid, sensitive and specific detection of C. psittaci facilitates timely diagnosis and treatment of patients.Aim. This study aimed to engineer the LAMP-CRISPR/Cas12b platform for C. psittaci detection.Methodology. The loop-mediated isothermal amplification (LAMP) technique and clustered regularly interspaced short palindromic repeats-CRISPR associated protein 12b (CRISPR-Cas12b) assay were combined to establish two-step and one-tube LAMP-CRISPR/Cas12b reaction systems, respectively, for rapidly detecting C. psittaci.Results. The two-step and one-tube LAMP-CRISPR/Cas12b assay could complete detection within 1 h. No cross-reactivity was observed from non-C. psittaci templates with specific LAMP amplification primers and single-guide RNA (sgRNA) targeting the highly conserved short fragment CPSIT_0429 gene of C. psittaci. The detection limits of the two-step and one-tube LAMP-CRISPR/Cas12b reaction were 102 aM and 103 aM, respectively. The results were consistent with qPCR for nucleic acid detection in 160 clinical samples, including 80 suspected C. psittaci samples, kept in the laboratory.Conclusions. The LAMP-CRISPR/Cas12b assay developed in this study provides a sensitive and specific method for rapidly detecting C. psittaci and offers technical support for its rapid diagnosis.

Development of an Integrated Sample Amplification Control for Salivary Point-of-Care Pathogen Testing

Background

The COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed.

Results

We developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 minutes without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples.

Significance

IACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices.

Effect of carrier yeast RNAs in the detection of SARS-CoV-2 by RT-LAMP

The COVID-19 pandemic caused by SARS-CoV-2 has underscored the need for rapid and accurate diagnostic methods. Reverse Transcription Loop-Mediated Isothermal Amplification (RT-LAMP) has emerged as a promising molecular tool in least developed countries due to its simplicity, speed, and sensitivity. Nevertheless, reliable SARS-CoV-2 detection can be challenged by the chain custody of the samples. In this context, carrier RNA can act as a preservative. In this study, we explored the potential of yeast total and transference RNA (tRNA) in the SARS-CoV-2 RT-LAMP. We have found that most optimal conditions are reached with 1 μg/μL tRNA in the RT-LAMP reaction.

Recent advances in RNA sample preparation techniques for the detection of SARS-CoV-2 in saliva and gargle

Molecular detection of SARS-CoV-2 in gargle and saliva complements the standard analysis of nasopharyngeal swabs (NPS) specimens. Although gargle and saliva specimens can be readily obtained non-invasively, appropriate collection and processing of gargle and saliva specimens are critical to the accuracy and sensitivity of the overall analytical method. This review highlights challenges and recent advances in the treatment of gargle and saliva samples for subsequent analysis using reverse transcription polymerase chain reaction (RT-PCR) and isothermal amplification techniques. Important considerations include appropriate collection of gargle and saliva samples, on-site inactivation of viruses in the sample, preservation of viral RNA, extraction and concentration of viral RNA, removal of substances that inhibit nucleic acid amplification reactions, and the compatibility of sample treatment protocols with the subsequent nucleic acid amplification and detection techniques. The principles and approaches discussed in this review are applicable to molecular detection of other microbial pathogens.

Recent progress on wastewater-based epidemiology for COVID-19 surveillance: A systematic review of analytical procedures and epidemiological modeling

On March 11, 2020, the World Health Organization declared the coronavirus disease 2019 (COVID-19), whose causative agent is the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), a pandemic. This virus is predominantly transmitted via respiratory droplets and shed via sputum, saliva, urine, and stool. Wastewater-based epidemiology (WBE) has been able to monitor the circulation of viral pathogens in the population. This tool demands both in-lab and computational work to be meaningful for, among other purposes, the prediction of outbreaks. In this context, we present a systematic review that organizes and discusses laboratory procedures for SARS-CoV-2 RNA quantification from a wastewater matrix, along with modeling techniques applied to the development of WBE for COVID-19 surveillance. The goal of this review is to present the current panorama of WBE operational aspects as well as to identify current challenges related to it. Our review was conducted in a reproducible manner by following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines for systematic reviews. We identified a lack of standardization in wastewater analytical procedures. Regardless, the reverse transcription-quantitative polymerase chain reaction (RT-qPCR) approach was the most reported technique employed to detect and quantify viral RNA in wastewater samples. As a more convenient sample matrix, we suggest the solid portion of wastewater to be considered in future investigations due to its higher viral load compared to the liquid fraction. Regarding the epidemiological modeling, the data-driven approach was consistently used for the prediction of variables associated with outbreaks. Future efforts should also be directed toward the development of rapid, more economical, portable, and accurate detection devices.

Vivid COVID-19 LAMP is an ultrasensitive, quadruplexed test using LNA-modified primers and a zinc ion and 5-Br-PAPS colorimetric detection system

Sensitive and rapid point-of-care assays have been crucial in the global response to SARS-CoV-2. Loop-mediated isothermal amplification (LAMP) has emerged as an important diagnostic tool given its simplicity and minimal equipment requirements, although limitations exist regarding sensitivity and the methods used to detect reaction products. We describe the development of Vivid COVID-19 LAMP, which leverages a metallochromic detection system utilizing zinc ions and a zinc sensor, 5-Br-PAPS, to circumvent the limitations of classic detection systems dependent on pH indicators or magnesium chelators. We make important strides in improving RT-LAMP sensitivity by establishing principles for using LNA-modified LAMP primers, multiplexing, and conducting extensive optimizations of reaction parameters. To enable point-of-care testing, we introduce a rapid sample inactivation procedure without RNA extraction that is compatible with self-collected, non-invasive gargle samples. Our quadruplexed assay (targeting E, N, ORF1a, and RdRP) reliably detects 1 RNA copy/µl of sample (=8 copies/reaction) from extracted RNA and 2 RNA copies/µl of sample (=16 copies/reaction) directly from gargle samples, making it one of the most sensitive RT-LAMP tests and even comparable to RT-qPCR. Additionally, we demonstrate a self-contained, mobile version of our assay in a variety of high-throughput field testing scenarios on nearly 9,000 crude gargle samples. Vivid COVID-19 LAMP can be an important asset for the endemic phase of COVID-19 as well as preparing for future pandemics.

Advances in RT-LAMP for COVID-19 testing and diagnosis

INTRODUCTION

The SARS-CoV-2 pandemic, and the subsequent limitations on standard diagnostics, has vastly expanded the user base of Reverse Transcription Loop-mediated isothermal Amplification (RT-LAMP) in fundamental research and development. RT-LAMP has also penetrated commercial markets, with emergency use authorizations for clinical diagnosis.

AREAS COVERED

This review discusses the role of RT-LAMP within the context of other technologies like RT-qPCR and rapid antigen tests, progress in sample preparation strategies to enable simplified workflow for RT-LAMP directly from clinical specimens, new challenges with primer and assay design for the evolving pandemic, prominent detection modalities including colorimetric and CRISPR-mediated methods, and translational research and commercial development of RT-LAMP for clinical applications.

EXPERT OPINION

RT-LAMP occupies a middle ground between RT-qPCR and rapid antigen tests. The simplicity approaches that of rapid antigen tests, making it suitable for point-of-care use, but the sensitivity nears that of RT-qPCR. RT-LAMP still lags RT-qPCR in fundamental understanding of the mechanism, and the interplay between sample preparation and assay performance. Industry is now beginning to address issues around scalability and usability, which could finally enable LAMP and RT-LAMP to find future widespread application as a diagnostic for other conditions, including other pathogens with pandemic potential.

Development of an optimized colorimetric RT-LAMP for SARS-CoV-2 assay with enhanced procedure controls for remote diagnostics

The coronavirus pandemic accentuated the need for molecular diagnostic tests. A technique highly used to this end is the Polymerase Chain Reaction (PCR)-a sensitive and specific technique commonly used as the gold standard for molecular diagnostics. However, it demands highly trained personnel and high-maintenance equipment and is relatively time-consuming. An alternative is the Loop-Mediated Isothermal Amplification (LAMP) technique, which doesn't need sample purification or expensive equipment, and is similar to PCR when compared in sensitivity and specificity. In this paper, we developed an optimized colorimetric Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) Point-of-Care test using a portable device to diagnose COVID-19. Variables such as concentration of primers, magnesium sulfate, betaine, hydrochloride guanidine, Bst, and temperature of the reactions were tested. We also created a pipetting quality control system-using a combination of dyes-to avoid false negatives due to a lack of samples added to the reaction test tube. Mineral oil was incorporated in the composition of the RT-LAMP reactions to avoid evaporation when a heating lid isn't available. The final RT-LAMP test is tenfold more sensitive when compared to the WarmStart Colorimetric Master mix from New England Biolabs with a sensitivity of 5 copies per μL.

Saliva-based methods for SARS-CoV-2 testing in low- and middle-income countries

As the coronavirus disease 2019 (COVID-19) continues to disproportionately affect low- and middle-income countries, the need for simple, accessible and frequent diagnostic testing grows. In lower-resource settings, case detection is often limited by a lack of available testing for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). To address global inequities in testing, alternative sample types could be used to increase access to testing by reducing the associated costs. Saliva is a sensitive, minimally invasive and inexpensive diagnostic sample for SARS-CoV-2 detection that is appropriate for asymptomatic surveillance, symptomatic testing and at-home collection. Saliva testing can lessen two major challenges faced by lower- and middle-income countries: constrained resources and overburdened health workers. Saliva sampling enables convenient self-collection and requires fewer resources than swab-based methods. However, saliva testing for SARS-CoV-2 diagnostics has not been implemented on a large scale in low- and middle-income countries. While numerous studies based in these settings have demonstrated the usefulness of saliva sampling, there has been insufficient attention on optimizing its implementation in practice. We argue that implementation science research is needed to bridge this gap between evidence and practice. Low- and middle-income countries face many barriers as they continue their efforts to provide mass COVID-19 testing in the face of substantial inequities in global access to vaccines. Laboratories should look to replicate successful approaches for sensitive detection of SARS-CoV-2 in saliva, while governments should act to facilitate mass testing by lifting restrictions that limit implementation of saliva-based methods.

SARS-CoV-2 detection methods: A comprehensive review

The ongoing novel COVID-19 has remained the center of attention, since its declaration as a pandemic in March 2020, due to its rapid and uncontrollable worldwide spread. Diagnostic tests are the first line of defense against the transmission of this infectious disease among individuals, with reverse-transcription quantitative polymerase chain reaction (RT-qPCR) being the approved gold standard for showing high sensitivity and specificity in detecting SARS-CoV-2. However, alternative tests are being invested due to the global demand for facilities, reagents, and healthcare workers needed for rapid population-based testing. Also, the rapid evolution of the viral genome and the emergence of new variants necessitates updating the existing methods. Scientists are aiming to improve tests to be affordable, simple, fast, and at the same time accurate, and efficient, as well as friendly user testing. The current diagnostic methods are either molecular-based that detect nucleic acids abundance, like RT-qPCR and reverse-transcription loop-mediated isothermal amplification (RT-LAMP); or immunologically based that detect the presence of antigens or antibodies in patients' specimens, like enzyme-linked immunosorbent assay (ELISA), lateral flow assay (LFA), chemiluminescent immunoassay (CLIA), and neutralization assay. In addition to these strategies, sensor-based or CRISPR applications are promising tools for the rapid detection of SARS-CoV-2. This review summarizes the most recent updates on the SARS-CoV-2 detection methods with their limitations. It will guide researchers, epidemiologists, and clinicians in identifying a more rapid, reliable, and sensitive method of diagnosing SARS-CoV-2 including the most recent variant of concern Omicron.

Strategies That Facilitate Extraction-Free SARS-CoV-2 Nucleic Acid Amplification Tests

The COVID-19 pandemic has resulted in an unprecedented global demand for in vitro diagnostic reagents. Supply shortages and hoarding have impacted testing capacity which has led to inefficient COVID-19 case identification and transmission control, predominantly in developing countries. Traditionally, RNA extraction is a prerequisite for conducting SARS-CoV-2 nucleic acid amplification tests (NAAT); however, simplified methods of sample processing have been successful at bypassing typical nucleic acid extraction steps, enabling extraction-free SARS-CoV-2 NAAT workflows. These methods involve chemical and physical approaches that are inexpensive and easily accessible alternatives to overcome extraction kit supply shortages, while offering acceptable test performance. Here we provide an overview of three main sample preparation strategies that have been shown to facilitate extraction-free SARS-CoV-2 NAATs.

Saliva versus Upper Respiratory Swabs: Equivalent for Severe Acute Respiratory Syndrome Coronavirus 2 University Screening while Saliva Positivity Is Prolonged After Symptom Onset in Coronavirus Disease 2019 Hospitalized Patients

Reopening of schools and workplaces during the ongoing coronavirus disease 2019 (COVID-19) pandemic requires affordable and convenient population-wide screening methods. Although upper respiratory swab is considered the preferable specimen for testing, saliva offers several advantages, such as easier collection and lower cost. In this study, we compared the performance of saliva with upper respiratory swab for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection. Paired saliva and anterior nares specimens were collected from a largely asymptomatic cohort of students, faculty, and staff from the University of Pennsylvania. Paired saliva and combined nasopharyngeal/oropharyngeal (NP/OP) specimens were also collected from hospitalized patients with symptomatic COVID-19 following confirmatory testing. All study samples were tested by real-time PCR in the Hospital of the University of Pennsylvania. In the university cohort, positivity rates were 37 of 2500 for saliva (sensitivity, 86.1%) and 36 of 2500 for anterior nares (sensitivity, 83.7%), with an overall agreement of 99.6%. In the hospital study cohort, positivity rates were 35 of 49 for saliva (sensitivity, 89.3%) and 28 of 49 for NP/OP (sensitivity, 75.8%), with an overall agreement of 75.6%. A larger proportion of saliva than NP/OP samples tested positive after 4 days of symptom onset in hospitalized patients. Our results show that saliva has an acceptable sensitivity and is comparable to upper respiratory swab, supporting the use of saliva for SARS-CoV-2 detection in both symptomatic and asymptomatic populations.

Portable real-time colorimetric LAMP-device for rapid quantitative detection of nucleic acids in crude samples

Loop-mediated isothermal amplification is known for its high sensitivity, specificity and tolerance to inhibiting-substances. In this work, we developed a device for performing real-time colorimetric LAMP combining the accuracy of lab-based quantitative analysis with the simplicity of point-of-care testing. The device innovation lies on the use of a plastic tube anchored vertically on a hot surface while the side walls are exposed to a mini camera able to take snapshots of the colour change in real time during LAMP amplification. Competitive features are the rapid analysis (< 30 min), quantification over 9 log-units, crude sample-compatibility (saliva, tissue, swabs), low detection limit (< 5 copies/reaction), smartphone-operation, fast prototyping (3D-printing) and ability to select the dye of interest (Phenol red, HNB). The device’s clinical utility is demonstrated in cancer mutations-analysis during the detection of 0.01% of BRAF-V600E-to-wild-type molecules from tissue samples and COVID-19 testing with 97% (Ct < 36.8) and 98% (Ct < 30) sensitivity when using extracted RNA and nasopharyngeal-swabs, respectively. The device high technology-readiness-level makes it a suitable platform for performing any colorimetric LAMP assay; moreover, its simple and inexpensive fabrication holds promise for fast deployment and application in global diagnostics.

Performances of rapid and connected salivary RT-LAMP diagnostic test for SARS-CoV-2 infection in ambulatory screening

In the context of social events reopening and economic relaunch, sanitary surveillance of SARS-CoV-2 infection is still required. Here, we evaluated the diagnostic performances of a rapid, extraction-free and connected reverse-transcription loop-mediated isothermal amplification (RT-LAMP) assay on saliva. Nasopharyngeal (NP) swabs and saliva from 443 outpatients were collected simultaneously and tested by reverse-transcription quantitative PCR (RT-qPCR) as reference standard test. Seventy-one individuals (16.0%) were positive by NP and/or salivary RT-qPCR. Sensitivity and specificity of salivary RT-LAMP were 85.9% (95%CI 77.8–94.0%) and 99.5% (98.7–100%), respectively. Performances were similar for symptomatic and asymptomatic participants. Moreover, SARS-CoV-2 genetic variants were analyzed and no dominant mutation in RT-LAMP primer region was observed during the period of the study. We demonstrated that this RT-LAMP test on self-collected saliva is reliable for SARS-CoV-2 detection. This simple connected test with optional automatic results transfer to health authorities is unique and opens the way to secure professional and social events in actual context of economics restart.

Implementation of a Rapid RT-LAMP Saliva-Based SARS-CoV-2 Testing Program in the Workplace

Rising SARS-CoV-2 cases, testing delays, and the risk of pre-symptomatic and asymptomatic transmission provided the impetus for an in-house rapid testing program. Employees and their household contacts were encouraged to self-collect saliva samples that were pooled for routine testing using an established colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay. In brief, individual or a maximum of four saliva samples were pooled and heat-inactivated to render microorganisms, especially SARS-CoV-2, non-infectious prior to being added to RT-LAMP assay tubes containing either the human sample control gene, RNase P, or a region of the SARS-CoV-2 gene, ORF1ab. During the second wave of SARS-CoV-2 infections in November 2020, two samples from an employee and a member of their household tested positive via RT-LAMP within two days of each other. A delayed clinical qRT-PCR test confirmation of both individuals 5 days later underscored the power of routine rapid testing with within-the-hour turnaround times. Workplace rapid testing programs using RT-LAMP are flexible in their design, have a reduced cost compared to qRT-PCR, may involve non-invasive self-saliva collection for increased safety for the testing personnel, and can be performed with minimal training.

Assessment of a Smartphone-Based Loop-Mediated Isothermal Amplification Assay for Detection of SARS-CoV-2 and Influenza Viruses

Importance

A critical need exists in low-income and middle-income countries for low-cost, low-tech, yet highly reliable and scalable testing for SARS-CoV-2 virus that is robust against circulating variants.

Objective

To assess whether a smartphone-based assay is suitable for SARS-CoV-2 and influenza virus testing without requiring specialized equipment, accessory devices, or custom reagents.

Design, Setting, and Participants

This cohort study enrolled 2 subgroups of participants (symptomatic and asymptomatic) at Santa Barbara Cottage Hospital. The symptomatic group consisted of 20 recruited patients who tested positive for SARS-CoV-2 with symptoms; 30 asymptomatic patients were recruited from the same community, through negative admission screening tests for SARS-CoV-2. The smartphone-based real-time loop-mediated isothermal amplification (smaRT-LAMP) was first optimized for analysis of human saliva samples spiked with either SARS-CoV-2 or influenza A or B virus; these results then were compared with those obtained by side-by-side analysis of spiked samples using the Centers for Disease Control and Prevention (CDC) criterion-standard reverse transcriptase-quantitative polymerase chain reaction (RT-qPCR) assay. Next, both assays were used to test for SARS-CoV-2 and influenza viruses present in blinded clinical saliva samples obtained from 50 hospitalized patients. Statistical analysis was performed from May to June 2021.

Exposures

Testing for SARS-CoV-2 and influenza A and B viruses.

Main Outcomes and Measures

SARS-CoV-2 and influenza infection status and quantitative viral load were determined.

Results

Among the 50 eligible participants with no prior SARS-CoV-2 infection included in the study, 29 were men. The mean age was 57 years (range, 21 to 93 years). SmaRT-LAMP exhibited 100% concordance (50 of 50 patient samples) with the CDC criterion-standard diagnostic for SARS-CoV-2 sensitivity (20 of 20 positive and 30 of 30 negative) and for quantitative detection of viral load. This platform also met the CDC criterion standard for detection of clinically similar influenza A and B viruses in spiked saliva samples (n = 20), and in saliva samples from hospitalized patients (50 of 50 negative). The smartphone-based LAMP assay was rapid (25 minutes), sensitive (1000 copies/mL), low-cost (<$7/test), and scalable (96 samples/phone).

Conclusions and Relevance

In this cohort study of saliva samples from patients, the smartphone-based LAMP assay detected SARS-CoV-2 infection and exhibited concordance with RT-qPCR tests. These findings suggest that this tool could be adapted in response to novel CoV-2 variants and other pathogens with pandemic potential including influenza and may be useful in settings with limited resources.

A paper-based colorimetric molecular test for SARS-CoV-2 in saliva

Herein, we describe the development of a paper-based device to detect nucleic acids of pathogens of interest in complex samples using loop-mediated isothermal amplification (LAMP) by producing a colorimetric response visible to the human eye. To demonstrate the utility of this device in emerging public health emergencies, we developed and optimized our device to detect SARS-CoV-2 in human saliva without preprocessing. The resulting device was capable of detecting the virus within 60 min and had an analytical sensitivity of 97% and a specificity of 100% with a limit of detection of 200 genomic copies/μL of patient saliva using image analysis. The device consists of a configurable number of reaction zones constructed of Grade 222 chromatography paper separated by 20 mil polystyrene spacers attached to a Melinex® backing via an ARclean® double-sided adhesive. The resulting device is easily configurable to detect multiple targets and has the potential to detect a variety of pathogens simply by changing the LAMP primer sets.

CRISPR detectives against SARS-CoV-2: a major setback against COVID-19 blowout

The emergence of SARS-CoV-2 has brought the world to a standstill, and till date, effective treatments and diagnostics against this idiosyncratic pathogen are lacking. As compared to the standard WHO/CDC qPCR detection method, which consumes several hours for detection, CRISPR-based SHERLOCK, DETECTR, and FELUDA have emerged as rapid diagnostic tools for the detection of the RNA genome of SARS-CoV-2 within an hour with 100% accuracy, specificity, and sensitivity. These attributes of CRISPR-based detection technologies have taken themselves one step ahead of available detection systems and are emerging as an inevitable tool for quick detection of the virus. Further, the discovery of Cas13s nucleases and their orthologs has opened a new corridor for exploitation of Cas13s as an antiviral therapy against SARS-CoV-2 and other viral diseases. One such approach is Prophylactic Antiviral CRISPR in huMAN cells (PACMAN), which needs a long haul to bring into therapy. The approval of SHERLOCK as the first CRISPR-based SARS-CoV-2 test kit by the FDA, for emergency diagnosis of COVID-19 patients, has given positive hope to scientists that sooner human trials of CRISPR-based therapy will be ratified. In this review, we have extensively reviewed the present CRISPR-based approaches, challenges, and future prospects in the light of diagnostics and therapeutics against SARS-CoV-2. KEY POINTS: • The discovery of Cas12 and Cas13 siblings allowed scientists to detect the viral genes. • Cas13d's identification aided scientists in precisely cleaving the SARS-CoV-2 ssRNA. • CRISPR-Cas system acts as "molecular detector and antiviral proctor."

Isothermal amplification and fluorescent detection of SARS-CoV-2 and SARS-CoV-2 variant virus in nasopharyngeal swabs

The COVID-19 pandemic caused by the SARS-CoV-2 is a serious health threat causing worldwide morbidity and mortality. Real-time reverse transcription PCR (RT-qPCR) is currently the standard for SARS-CoV-2 detection. Although various nucleic acid-based assays have been developed to aid the detection of SARS-CoV-2 from COVID-19 patient samples, the objective of this study was to develop a diagnostic test that can be completed in 30 minutes without having to isolate RNA from the samples. Here, we present an RNA amplification detection method performed using reverse transcription loop-mediated isothermal amplification (RT-LAMP) reactions to achieve specific, rapid (30 min), and sensitive (<100 copies) fluorescent detection in real-time of SARS-CoV-2 directly from patient nasopharyngeal swab (NP) samples. When compared to RT-qPCR, positive NP swab samples assayed by fluorescent RT-LAMP had 98% (n = 41/42) concordance and negative NP swab samples assayed by fluorescent RT-LAMP had 87% (n = 59/68) concordance for the same samples. Importantly, the fluorescent RT-LAMP results were obtained without purification of RNA from the NP swab samples in contrast to RT-qPCR. We also show that the fluorescent RT-LAMP assay can specifically detect live virus directly from cultures of both SARS-CoV-2 wild type (WA1/2020), and a SARS-CoV-2 B.1.1.7 (alpha) variant strain with equal sensitivity to RT-qPCR. RT-LAMP has several advantages over RT-qPCR including isothermal amplification, speed (<30 min), reduced costs, and similar sensitivity and specificity.

COVID-19 Seroprevalence and Active Infection in an Asymptomatic Population

In response to the COVID-19 pandemic, immediate and scalable testing solutions are needed to direct return to full capacity planning in the general public and across the Department of Defense (DoD). To fully understand the extent to which a population has been affected by COVID-19, active monitoring approaches require an estimation of overall seroprevalence in addition to accurate, affordable, and rapid tests to detect current SARS-CoV-2 infection. In this study, researchers in the Air Force Research Laboratory's 711th Human Performance Wing, Airman Systems Directorate evaluated the performance of various testing methods for the detection of SARS-CoV-2 antibodies and viral RNA in asymptomatic adults working at Wright-Patterson Air Force Base and the surrounding area during the period of 23 July 2020-23 Oct 2020. Altogether, there was a seroprevalance of 3.09% and an active infection rate of 0.5% (determined via the testing of saliva samples) amongst individuals tested, both of which were comparable to local and national averages at the time. This work also presents technical and non-technical assessments of various testing strategies as compared to the gold standard approaches (e.g., lateral flow assays vs. ELISA and RT-LAMP vs. RT-PCR) in order to explore orthogonal supply chains and fieldability. Exploration and validation of multiple testing strategies will allow the DoD and other workforces to make informed responses to COVID-19 and future pandemics.

Evaluation of saliva as a complementary technique to the diagnosis of COVID-19: a systematic review

BACKGROUND

Infectious disease coronavirus 2019 (COVID-19) is caused by the SARS-CoV-2 virus, and it mainly affects the upper respiratory tract. The gold standard for its diagnosis is real-time reverse transcription polymerase chain reaction (RT-qPCR) performed on a nasopharyngeal swab. In contrast, testing saliva has significant advantages as a diagnostic method.

MATERIAL AND METHODS

We searched for articles evaluating saliva as a diagnostic method for COVID-19 on the PUBMED/MEDLINE, WEB OF SCIENCE, COCHRANE, and SCIELO platforms. We initially found 233 articles and 20 were selected for inclusion following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses protocol: 18 cross-sectional studies and 2 case reports, including 8 from America, 8 from Asia, and 4 from Europe. The studies evaluated the presence of viral RNA, IgG, IgM, and IgA in samples of unstimulated saliva from adults with confirmed or suspected COVID-19. The vast majority of the studies performed RT-qPCR on the saliva samples and compared the results with the gold standard (a nasopharyngeal swab of the same patient).

RESULTS

Saliva samples analyzed by RT-qPCR, reverse transcription isothermal amplification (RT-LAMP), spectroscopy, and enzyme-linked immunosorbent assay (ELISA) offer high sensitivity to detect SARS-CoV-2 in the early stages of the disease and among asymptomatic patients as compared to nasopharyngeal swab RT-qPCR. In addition, the self-collection of saliva offers the possibility of receiving telemedicine instructions to carry out the test, reducing the risk of contagion.

CONCLUSIONS

The diagnosis of COVID-19 through saliva is sensitive, non-invasive, and is of low risk for the healthcare professionals. However, further studies are recommended to validate its clinical use.

Reverse Transcription Loop-Mediated Isothermal Amplification Assay for Ultrasensitive Detection of SARS-CoV-2 in Saliva and Viral Transport Medium Clinical Samples

The COVID-19 pandemic has underscored the shortcomings in the deployment of state-of-the-art diagnostics platforms. Although several polymerase chain reaction (PCR)-based techniques have been rapidly developed to meet the growing testing needs, such techniques often need samples collected through a swab, the use of RNA extraction kits, and expensive thermocyclers in order to successfully perform the test. Isothermal amplification-based approaches have also been recently demonstrated for rapid severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection by minimizing sample preparation while also reducing the instrumentation and reaction complexity. In addition, there are limited reports of saliva as the sample source, and some of these indicate inferior sensitivity when comparing reverse transcription loop-mediated isothermal amplification (RT-LAMP) with PCR-based techniques. In this paper, we demonstrate an improved sensitivity assay from saliva using a two-step RT-LAMP assay, where a short 10 min RT step is performed with only B3 and backward inner primers before the final reaction. We show that while the one-step RT-LAMP demonstrates satisfactory results, the optimized two-step approach allows detection of only few molecules per reaction and performs significantly better than the one-step RT-LAMP and conventional two-step RT-LAMP approaches with all primers included in the RT step. We show control measurements with RT-PCR, and importantly, we demonstrate RNA extraction-free RT-LAMP-based assays for detection of SARS-CoV-2 from viral transport media and saliva clinical samples.