Effects of bioactive glass incorporation into glass ionomer cement on demineralized dentin

Advancing dentin remineralization: Exploring amorphous calcium phosphate and its stabilizers in biomimetic approaches

OBJECTIVE

This review elucidates the mechanisms underpinning intrafibrillar mineralization, examines various amorphous calcium phosphate (ACP) stabilizers employed in dentin's intrafibrillar mineralization, and addresses the challenges encountered in clinical applications of ACP-based bioactive materials.

METHODS

The literature search for this review was conducted using three electronic databases: PubMed, Web of Science, and Google Scholar, with specific keywords. Articles were selected based on inclusion and exclusion criteria, allowing for a detailed examination and summary of current research on dentin remineralization facilitated by ACP under the influence of various types of stabilizers.

RESULTS

This review underscores the latest advancements in the role of ACP in promoting dentin remineralization, particularly intrafibrillar mineralization, under the regulation of various stabilizers. These stabilizers predominantly comprise non-collagenous proteins, their analogs, and polymers. Despite the diversity of stabilizers, the mechanisms they employ to enhance intrafibrillar remineralization are found to be interrelated, indicating multiple driving forces behind this process. However, challenges remain in effectively designing clinically viable products using stabilized ACP and maximizing intrafibrillar mineralization with limited materials in practical applications.

SIGNIFICANCE

The role of ACP in remineralization has gained significant attention in dental research, with substantial progress made in the study of dentin biomimetic mineralization. Given ACP's instability without additives, the presence of ACP stabilizers is crucial for achieving in vitro intrafibrillar mineralization. However, there is a lack of comprehensive and exhaustive reviews on ACP bioactive materials under the regulation of stabilizers. A detailed summary of these stabilizers is also instrumental in better understanding the complex process of intrafibrillar mineralization. Compared to traditional remineralization methods, bioactive materials capable of regulating ACP stability and controlling release demonstrate immense potential in enhancing clinical treatment standards.

Evaluation of Physical Properties in Carboxymethyl Chitosan Modified Glass Ionomer Cements and the Effect for Dentin Remineralization: SEM/EDX, Compressive Strength, and Ca/P Ratio

OBJECTIVE

 The aim of this article was to evaluate the effects of modifying glass ionomer cement (GIC) with carboxymethyl chitosan (CMC) on surface morphology and remineralization outcomes by examining dentin morphology and calcium ion composition changes.

MATERIALS AND METHODS

 Thirty holes in a cylindrical acrylic mold were filled with three groups of restorative materials: GIC, GIC modified with CMC (GIC-CMC) 5%, and GIC-CMC10%. The surface morphology of each group's materials was observed using scanning electron microscopy (SEM). The compressive strength measurement was performed using a universal testing machine. The dentin remineralization process was performed by applying GIC, GIC-CMC5%, and GIC-CMC10% materials for 14 days on demineralized dentin cavities treated with 17% ethylenediamine tetraacetic acid (EDTA) for 7 days. A morphological evaluation was conducted using SEM. The calcium ion composition and calcium-to-phosphorous (Ca/P) ratio were examined using an energy-dispersive X-ray (EDX).

STATISTICAL ANALYSIS

 The Kruskal-Wallis and post-hoc Mann-Whitney U tests were performed to compare all four groups of calcium ions (p < 0.05).

RESULTS

 The modification of GIC with CMC affected the morphological changes in the materials in the form of reduced porosity and increased fractures. A significant difference was found in compressive strength between the GIC-CMC modification materials of GIC-CMC5% and GIC-CMC10% and the GIC control group. The dentin tubule morphology and surface changes were observed after applying GIC, GIC-CMC5%, and GIC-CMC10% materials for 14 days, as evaluated by SEM. The EDX examination showed an increase in calcium ion content and hydroxyapatite formation (Ca/P ratio) after applying the GIC-CMC10% material.

CONCLUSION

 The surface porosity of the GIC modification material with the addition of CMC tended to decrease. However, an increase in cracked surfaces that widened, along with the rise in CMC percentage, was found. This modification also reduced the compressive strength of the materials, with the lowest average yield at 10% CMC addition. Therefore, the modification of GIC with CMC affects changes in morphology, calcium ion composition, and Ca/P ratio in demineralized dentin.

Evaluation of Surface Topography and Biomimetic Remineralization Capacity of Dendrimers in Comparison With Calcium Silicate Cement: An In Vitro Study

INTRODUCTION

Biodentine, a calcium silicate-based material, is known for its biocompatibility and ability to promote dentin regeneration. With their unique branching structure, polyamidoamine (PAMAM) dendrimers have shown promise in facilitating biomimetic remineralization processes.

AIM

This study investigates the synergistic effects of combining PAMAM with Biodentine on root dentin remineralization, aiming to develop a novel bioactive compound that offers superior protective and regenerative properties.

METHODS

The following predictions were made: (1) In a cyclic artificial saliva/acid regimen, among the test groups, the combination of Biodentine and PAMAM would cause the most root dentin remineralization (2). Biodentine alone would increase Ca and P concentrations, neutralize acid, and promote root dentin remineralization (3). PAMAM, on the other hand, can remineralize the demineralized root dentin.

RESULTS

Minimal mineral regeneration was accomplished in demineralized root dentin when treated with Biodentine or PAMAM alone. Root dentin remineralization was most pronounced when Biodentine and PAMAM were used together, and the hardness of demineralized root dentin was raised to an equivalent level to that of healthy root dentin.

DISCUSSION

The study demonstrated the exceptional ability of PAMAM + Biodentine to promote root dentin remineralization. In an acid-challenging environment, PAMAM + Biodentine promoted full and efficient root dentin remineralization. Restorations made using innovative PAMAM + Biodentine technology show promise in remineralizing and protecting tooth structures.

Effect of E-glass fibers addition on compressive strength, flexural strength, hardness, and solubility of glass ionomer based cement

BACKGROUND

In dentistry, glass-ionomer cements (GICs) are extensively used for a range of applications. The unique properties of GIC include fluoride ion release and recharge, chemical bonding to the tooth's hard tissues, biocompatibility, a thermal expansion coefficient like that of enamel and dentin, and acceptable aesthetics. Their high solubility and poor mechanical qualities are among their limitations. E-glass fibers are generally utilized to reinforce the polymer matrix and are identified by their higher silica content.

OBJECTIVES

The purpose of the study was to assess the impact of adding (10 wt% and 20 wt%) silane-treated E-glass fibers to traditional GIC on its mechanical properties (compressive strength, flexural strength, and surface hardness) and solubility.

METHODS

The characterization of the E-glass fiber fillers was achieved by XRF, SEM, and PSD. The specimens were prepared by adding the E-glass fiber fillers to the traditional GIC at 10% and 20% by weight, forming two innovative groups, and compared with the unmodified GIC (control group). The physical properties (film thickness and initial setting time) were examined to confirm operability after mixing. The evaluation of the reinforced GIC was performed by assessing the compressive strength, flexural strength, hardness, and solubility (n = 10 specimens per test). A one-way ANOVA and Tukey tests were performed for statistical analysis (p ≤ 0.05).

RESULTS

The traditional GIC showed the least compressive strength, flexural strength, hardness, and highest solubility. While the GIC reinforced with 20 wt% E-glass fibers showed the highest compressive strength, flexural strength, hardness, and least solubility. Meanwhile, GIC reinforced with 10 wt% showed intermediate results (P ≤ 0.05).

CONCLUSION

Using 20 wt% E-glass fiber as a filler with the traditional GIC provides a strengthening effect and reduced solubility.

The in vitro assessment of rheological properties and dentin remineralization of saliva substitutes containing propolis and aloe vera extracts

Saliva substitutes with enhanced dentin remineralization properties were expected to help manage caries progression in patients with xerostomia. This in vitro study examined the rheological properties and remineralization action of experimental saliva substitutes containing propolis extract and aloe vera extract on demineralized dentin. Four experimental saliva substitutes were formulated with varying concentrations of propolis extract (P) and aloe vera extract (A) were prepared. A commercial saliva substitute (Biotene Oral Rinse) was used as a commercial comparison. The rheological properties and viscosity of these materials were measured using a strain-controlled rheometer (n = 3). The remineralizing actions of saliva substitutes on demineralized dentin after 2 weeks were determined using ATR-FTIR and SEM-EDX (n = 8). The results were expressed as a percentage increase in the mineral-to-matrix ratio. Biotene demonstrated a significantly higher viscosity (13.5 mPa·s) than experimental saliva substitutes (p<0.05). The addition of extracts increased the viscosity of the saliva substitutes from 4.7 mPa·s to 5.2 mPa·s. All formulations showed minimal shear thinning behavior, which was the viscoelastic properties of natural saliva. The formulation containing 5 wt% of propolis exhibited the highest increase in the median mineral-to-matrix ratio (25.48%). The SEM-EDX analysis revealed substantial mineral precipitation in demineralized dentin, especially in formulations with 5 wt% or 2.5 wt% of propolis. The effect of the aloe vera extract was minimal. The addition of propolis and aloe vera extracts increased the viscosity of saliva substitutes. the addition of propolis for 2.5 or 5 wt% to saliva substitutes increased mineral apatite precipitation and tubule occlusion. To conclude, the saliva substitute containing propolis extract demonstrated superior remineralizing actions compared with those containing only aloe vera extract.

Bioactivity and remineralization potential of modified glass ionomer cement: A systematic review of the impact of calcium and phosphate ion release

This systematic review investigates the effectiveness of calcium and phosphate ions release on the bioactivity and remineralization potential of glass ionomer cement (GIC). Electronic databases, including PubMed-MEDLINE, Scopus, and Web of Science, were systematically searched according to PRISMA guidelines. This review was registered in the PROSPERO database. Five eligible studies on modifying GIC with calcium and phosphate ions were included. The risk of bias was assessed using the RoBDEMAT tool. The incorporation of these ions into GIC enhanced its bioactivity and remineralization properties. It promoted hydroxyapatite formation, which is crucial for remineralization, increased pH and inhibited cariogenic bacteria growth. This finding has implications for the development of more effective dental materials. This can contribute to improved oral health outcomes and the management of dental caries, addressing a prevalent and costly oral health issue. Nevertheless, comprehensive longitudinal investigations are needed to evaluate the clinical efficacy of this GIC's modification.

Sol-Gel Technologies to Obtain Advanced Bioceramics for Dental Therapeutics

The aim of this work is to review the application of bioceramic materials in the context of current regenerative dentistry therapies, focusing on the latest advances in the synthesis of advanced materials using the sol-gel methodology. Chemical synthesis, processing and therapeutic possibilities are discussed in a structured way, according to the three main types of ceramic materials used in regenerative dentistry: bioactive glasses and glass ceramics, calcium phosphates and calcium silicates. The morphology and chemical composition of these bioceramics play a crucial role in their biological properties and effectiveness in dental therapeutics. The goal is to understand their chemical, surface, mechanical and biological properties better and develop strategies to control their pore structure, shape, size and compositions. Over the past decades, bioceramic materials have provided excellent results in a wide variety of clinical applications related to hard tissue repair and regeneration. Characteristics, such as their similarity to the chemical composition of the mineral phase of bones and teeth, as well as the possibilities offered by the advances in nanotechnology, are driving the development of new biomimetic materials that are required in regenerative dentistry. The sol-gel technique is a method for producing synthetic bioceramics with high purity and homogeneity at the molecular scale and to control the surfaces, interfaces and porosity at the nanometric scale. The intrinsic nanoporosity of materials produced by the sol-gel technique correlates with the high specific surface area, reactivity and bioactivity of advanced bioceramics.

Evaluation of Abfraction Lesions Restored with Three Dental Materials: A Comparative Study

BACKGROUND

Abfraction lesions are manifested as damage to hard tissues in the cervical area of dental crowns. The study aimed to assess the direct restoration of abfraction lesions according to the modified United States Public Health Service (USPHS) criteria for 24 months. The restorations were accomplished with Fuji Bulk-GC, Omnichroma Flow-Tokuyama, and Beautifil® II-Shofu dental materials, and the therapy was or was not associated with wearing thermoformed mouthguards.

METHODS

From the 53 selected and analyzed patients (n = 53), 28 patients (with restorations of abfraction lesions) belonged to the 1st group and 25 patients (with 105 restorations, who also wore mouthguards) belonged to the 2nd group. Blind determination assessments were effectuated at baseline and after 2, 6, 12, 18, and 24 months. Results showed that, regardless of the rating score, there are no significant statistical differences in the evaluation criteria between the two groups of patients Conclusions: For each material, the scores of USPHS criterion presented good clinical performances after 24 months, with no significant statistical differences between the fillings and the applied therapy in the two groups of patients.

Effect of Biosilicate® Addition on Physical-Mechanical and Biological Properties of Dental Glass Ionomer Cements

This study investigated the influence of incorporating Biosilicate^® on the physico-mechanical and biological properties of glass ionomer cement (GIC). This bioactive glass ceramic (23.75% Na₂O, 23.75% CaO, 48.5% SiO₂, and 4% P₂O₅) was incorporated by weight (5%, 10%, or 15%) into commercially available GICs (Maxxion R and Fuji IX GP). Surface characterization was made by SEM (n = 3), EDS (n = 3), and FTIR (n = 1). The setting and working (S/W time) times (n = 3) and compressive strength (CS) were analyzed (n = 10) according to ISO 9917-1:2007. The ion release (n = 6) was determined and quantified by ICP OES and by UV-Vis for Ca, Na, Al, Si, P, and F. To verify cell cytotoxicity, stem cells from the apical papilla (SCAP) were exposed to eluates (n = 3, at a ratio of 1.8 cm²/mL) and analyzed 24 h post-exposure. Antimicrobial activity against Streptococcus mutans (ATCC 25175, NCTC 10449) was analyzed by direct contact for 2 h (n = 5). The data were submitted for normality and lognormality testing. One-way ANOVA and Tukey's test were applied for the working and setting time, compressive strength, and ion release data. Data from cytotoxicity and antimicrobial activity were submitted for Kruskal-Wallis' testing and Dunn's post hoc test (α = 0.05). Among all experimental groups, only those with 5% (wt) of Biosilicate^® showed better surface quality. Only M5% showed a comparable W/S time to the original material (p = 0.7254 and p = 0.5912). CS was maintained for all Maxxion R groups (p > 0.0001) and declined for Fuji IX experimental groups (p < 0.0001). The Na, Si, P, and F ions released were significantly increased for all Maxxion R and Fuji IX groups (p < 0.0001). Cytotoxicity was increased only for Maxxion R with 5% and 10% of Biosilicate^®. A higher inhibition of S. mutans growth was observed for Maxxion R with 5% of Biosilicate^® (less than 100 CFU/mL), followed by Maxxion R with 10% of Biosilicate^® (p = 0.0053) and Maxxion R without the glass ceramic (p = 0.0093). Maxxion R and Fuji IX presented different behaviors regarding Biosilicate^® incorporation. The impacts on physico-mechanical and biological properties were different depending on the GIC, but therapeutic ion release was increased for both materials.

Update on Dental Luting Materials

A dental luting material aids in the retention and stability of indirect restorations on the prepared tooth structure. In dentistry, clinicians are using a wide range of luting materials for the cementation of indirect restorations. Zinc oxide eugenol and non-eugenol cements, zinc phosphate cement, zinc polycarboxylate cement, glass ionomer cement and resin cements are common dental cements used in dentistry. Each luting material or cement possesses unique properties and clinical implications. An ideal luting cement should be biocompatible, insoluble, resistant to thermal and chemical assaults, antibacterial, aesthetic, simple and easy to use. It should have high strength properties under tension, shear and compression to resist stress at the restoration-tooth interface, as well as adequate working and setting times. So far, no luting material possesses all of these properties of an ideal cement. Scientists have been modifying the conventional luting cements to improve the material's clinical performance and developing novel materials for clinical use. To achieve the best clinical outcome, clinicians should update their knowledge and gain a good understanding of the luting materials so that they can make a wise clinical decision on the material selection and obtain an insight into the development of luting cements. Therefore, the objective of this study is to provide a discussion on the physical, chemical, adhesive and aesthetic properties of common luting materials. The clinical indications of these luting materials are suggested based on their properties. In addition, overviews of the modification of the conventional luting materials and the newly developed luting materials are provided.

Effect of Dentin Desensitizer Containing Novel Bioactive Glass on the Permeability of Dentin

The objective of this study was to evaluate the effect of novel bioactive glass (BAG)-containing desensitizers on the permeability of dentin. Experimental dentin desensitizers containing 3 wt% BAG with or without acidic functional monomers (10-MDP or 4-META) were prepared. A commercial desensitizer, Seal & Protect (SNP), was used as a control. To evaluate the permeability of dentin, real-time dentinal fluid flow (DFF) rates were measured at four different time points (demineralized, immediately after desensitizer application, after two weeks in simulated body fluid (SBF), and post-ultrasonication). The DFF reduction rate (ΔDFF) was also calculated. The surface changes were analyzed using field emission scanning electron microscopy (FE-SEM). Raman spectroscopy was performed to analyze chemical changes on the dentin surface. The ΔDFF of the desensitizers containing BAG, BAG with 10-MDP, and BAG with 4-META significantly increased after two weeks of SBF storage and post-ultrasonication compared to the SNP at each time point (p < 0.05). Multiple precipitates were observed on the surfaces of the three BAG-containing desensitizers. Raman spectroscopy revealed hydroxyapatite (HAp) peaks on the dentin surfaces treated with the three BAG-containing desensitizers. Novel BAG-containing dentin desensitizers can reduce the DFF rate about 70.84 to 77.09% in the aspect of reduction of DFF through the HAp precipitations after two weeks of SBF storage.

Effect of bioactive glass addition on the physical properties of mineral trioxide aggregate

Background

The addition of bioactive glass (BG), a highly bioactive material with remineralization potential, might improve the drawback of weakening property of mineral trioxide aggregates (MTA) when it encounters with body fluid. This study aims to evaluate the effect of BG addition on physical properties of MTA.

Methods

ProRoot (MTA), and MTA with various concentrations of BG (1, 2, 5 and 10% BG/MTA) were prepared. Simulated body fluid (SBF) was used to investigate the effect of the storage solution on dentin remineralization. Prepared specimens were examined as following; the push-out bond strength to dentin, compressive strength, setting time solubility and X-ray diffraction (XRD) analysis.

Results

The 2% BG/MTA showed higher push-out bond strengths than control group after 7 days of SBF storage. The 2% BG/MTA exhibited the highest compressive strength. Setting times were reduced in the 1 and 2% BG/MTA groups, and solubility of all experimental groups were clinically acceptable. In all groups, precipitates were observed in dentinal tubules via SEM. XRD showed the increased hydroxyapatite peaks in the 2, 5 and 10% BG/MTA groups.

Conclusion

It was verified that the BG-added MTA increased dentin push-out bond strength and compressive strength under SBF storage. The addition of BG did not negatively affect the MTA maturation reaction; it increased the amount of hydroxyapatite during SBF maturation.

Effect of Novel Bioactive Glass-Containing Dentin Adhesive on the Permeability of Demineralized Dentin

This study aimed to evaluate the effect of a novel bioactive glass (BAG)-containing dentin adhesive on the permeability of demineralized dentin. Bioactive glass (85% SiO₂, 15% CaO) was fabricated using the sol-gel process, and two experimental dentin adhesives were prepared with 3 wt% silica (silica-containing dentin adhesive; SCA) or BAG (BAG-containing dentin adhesive; BCA). Micro-tensile bond strength (μTBS) test, fracture mode analysis, field-emission scanning electron microscopy (FE-SEM) analysis of adhesive and demineralized dentin, real-time dentinal fluid flow (DFF) rate measurement, and Raman confocal microscopy were performed to compare SCA and BCA. There was no difference in μTBS between the SCA and BCA (p > 0.05). Multiple precipitates were evident on the surface of the BCA, and partial occlusion of dentinal tubules was observed in FE-SEM of BCA-approximated dentin. The DFF rate was reduced by 50.10% after BCA approximation and increased by 6.54% after SCA approximation. Raman confocal spectroscopy revealed an increased intensity of the hydroxyapatite (HA) peak on the dentin surface after BCA application. The novel BAG-containing dentin adhesive showed the potential of both reducing dentin permeability and dentin remineralization.

Effect of Bioactive Glass-Containing Light-Curing Varnish on Enamel Remineralization

This study aimed to evaluate the effect of novel experimental light-curing bioactive glass (BAG)-containing varnish on enamel remineralization. An experimental light-curing, BAG-containing varnish and two commercial varnishes (Nupro White Varnish; Dentsply International, York, PA, USA and Tooth Mousse; GC Corporation, Tokyo, Japan) were used. Microhardness tests (n = 3), field emission scanning electron microscopy (FE-SEM) coupled with energy dispersive X-ray spectroscopy (EDS) (n = 5), and X-ray diffraction (XRD) analysis (n = 5) were performed to compare the remineralization effect of three varnishes with and without ultrasonication. The data of microhardness test were analyzed using one-way ANOVA and Tukey's post hoc comparison (P < 0.05). Microhardness of demineralized enamel increased after the application of three varnishes (P < 0.05). The experimental BAG-containing varnish showed the highest microhardness among the three varnishes (P < 0.05). Ultrasonication decreased microhardness of Tooth Mousse and BAG-containing varnish groups (P < 0.05). FE-SEM and XRD revealed precipitates of hydroxyapatite (HAP) or fluorapatite (FAP) crystals of three varnishes. The novel experimental BAG-containing varnish may be a promising clinical strategy for the remineralization of early carious lesions or demineralized enamel surfaces.

Synergistic Effect of Bioactive Inorganic Fillers in Enhancing Properties of Dentin Adhesives-A Review

Dentin adhesives (DAs) play a critical role in the clinical success of dental resin composite (DRC) restorations. A strong bond between the adhesive and dentin improves the longevity of the restoration, but it is strongly dependent on the various properties of DAs. The current review was aimed at summarizing the information present in the literature regarding the improvement of the properties of DAs noticed after the addition of bioactive inorganic fillers. From our search, we were able to find evidence of multiple bioactive inorganic fillers (bioactive glass, hydroxyapatite, amorphous calcium phosphate, graphene oxide, calcium chloride, zinc chloride, silica, and niobium pentoxide) in the literature that have been used to improve the different properties of DAs. These improvements can be seen in the form of improved hardness, higher modulus of elasticity, enhanced bond, flexural, and ultimate tensile strength, improved fracture toughness, reduced nanoleakage, remineralization of the adhesive-dentin interface, improved resin tag formation, greater radiopacity, antibacterial effect, and improved DC (observed for some fillers). Most of the studies dealing with the subject area are in vitro. Future in situ and in vivo studies are recommended to positively attest to the results of laboratory findings.