Microplastic contamination of the drilling bivalve Hiatella arctica in Arctic rhodolith beds

Experimental ingestion of microplastics in three common Antarctic benthic species

Microplastics (MP) have spread to every corner of the globe, reaching remote areas like Antarctica. Recent studies detected MP in marine environments, including biota. Benthic organisms suffer negative effects upon MP ingestion, leading to impacts on their populations. To address the current knowledge gap on how Antarctic benthic invertebrates interact with MP, we conducted an experiment exposing a bivalve (Aequiyoldia eightsii) and two ascidians (Cnemidocarpa verrucosa and Molgula pedunculata) to polyethylene microbeads (mb). Specimens of each species were exposed for 48 h to two different concentrations of microbeads, a low dose (100 mb/l) and a high dose (1000 mb/l), with the same proportion of four different microbead size fractions (Fine (10-20 μm), Small (45-53 μm), Medium (106-125 μm), and Large (850-1000 μm)). After exposure, all three species had ingested microbeads. Significant differences between doses were observed in A. eightsii and C. verrucosa but not in M. pedunculata. Both ascidians ingested microbeads of all size fractions, whereas the bivalve did not ingest the largest microbeads. No significant differences were found between species in the number nor sizes of microbeads ingested. Minor variations between taxa may be attributed to the specific biology and anatomy of each species. Our study highlights the need for a deeper understanding of Antarctic benthic ecosystems, suggesting that the interaction with MP is species-specific. We believe that this study provides a baseline for assessing MP pollution in Antarctic benthic invertebrates and will help to inform policy-makers in protecting and preserving Antarctic marine ecosystems from MP pollution.

Microplastic pollution in commercially important edible marine bivalves: A comprehensive review

Microplastics have become major pollutants in the marine environment and can accumulate in high concentrations, especially in the gut of marine organisms. Unlike other seafood, bivalves are consumed whole, along with their digestive systems, resulting in the transfer of microplastics to humans. Therefore, there is an urgent need to review the status of microplastic pollution in marine bivalves. In this context, this article provides a comprehensive review of the status of microplastic pollution in marine bivalves and the impact of microplastics on the physiology and immunology of marine bivalves. In general, marine bivalves can accumulate high levels of microplastics in a tissue-specific manner. Although microplastic pollution does not cause mortality in bivalves, it can adversely affects bivalves' immunity, byssus production, and reproduction, potentially affecting bivalve populations. This article provides important information that will aid establishing management measures and determining the direction of future research.

Spatial distribution of small microplastics in the Norwegian Coastal Current

High concentrations of microplastic (MP) particles have been reported in the Arctic Ocean. However, studies on the high-resolution lateral and vertical transport of MPs from the European waters to the Arctic are still scarce. Here, we provide information about the concentrations and compositions of MPs in surface, subsurface, and deeper waters (< 1 m, ∼ 4 m, and 17-1679 m) collected at 18 stations on six transects along the Norwegian Coastal Current (NCC) using an improved Neuston Catamaran, the COntinuos MicroPlastic Automatic Sampling System (COMPASS), and in situ pumps, respectively. FTIR microscopy and spectroscopy were applied to measure MP concentration, polymer composition, and size distribution. Results indicate that the concentrations of small microplastics (SMPs, <300 μm) varied considerably (0-1240 MP m-3) within the water column, with significantly higher concentrations in the surface (189 MP m-3) and subsurface (38 MP m-3) waters compared to deeper waters (16 MP m-3). Furthermore, the average concentration of SMPs in surface water samples was four orders of magnitude higher than the abundance of large microplastics (LMPs, >300 μm), and overall, SMPs <50 μm account for >80 % of all detected MPs. However, no statistically significant geographical patterns were observed in SMP concentrations in surface/subsurface seawaters between the six sampling transects, suggesting a relatively homogeneous horizontal distribution of SMPs in the upper ocean within the NCC/Norwegian Atlantic Current (NwAC) interface. The Lagrangian particle dispersal simulation model further enabled us to assess the large-scale transport of MPs from the Northern European waters to the Arctic.

Mangrove mud clam as an effective sentinel species for monitoring changes in coastal microplastic pollution

The worldwide mangrove shorelines are experiencing considerable contamination from microplastics (MPs). Finding an effective sentinel species in the mangrove ecosystem is crucial for early warning of ecological and human health risks posed by coastal microplastic pollution. This study collected 186 specimens of the widely distributed mangrove clam (Geloina expansa, Solander, 1786) from 18 stations along the Leizhou Peninsula, the largest mangrove coast in Southern China. This study discovered that mangrove mud clams accumulated a relatively high abundance of MPs (2.96 [1.61 - 6.03] items·g-1) in their soft tissue, wet weight, as compared to previously reported levels in bivalves. MPs abundance is significantly (p < 0.05 or 0.0001) influenced by coastal urban development, aquaculture, and shell size. Furthermore, the aggregated MPs exhibit a significantly high polymer risk index (Level III, H = 353.83). The estimated annual intake risk (EAI) from resident consumption, as calculated via a specific questionnaire survey, was at a moderate level (990 - 2475, items·g -1·Capita -1). However, the EAI based on suggested nutritional standards is very high, reaching 113,990 (79,298 - 148,681), items·g -1·Capita -1. We recommend utilizing the mangrove mud clam as sentinel species for the monitoring of MPs pollution changing across global coastlines.

Glass reinforced plastic (GRP) boats and the impact on coastal environment - Evidence of fibreglass ingestion by marine bivalves from natural populations

Classified as marine debris, man made materials are polluting the world's oceans. Recently, glass reinforced plastic (GRP) has been shown to degrade and contaminate the coasts. In this pioneering study, fibreglass particles have been detected in the soft parts of oysters and mussels collected from natural populations, in front of an active boatyard. The presence of particulate glass, with concentrations up to 11,220 particles/kg ww in Ostrea edulis and 2740 particles/kg ww in Mytilus edulis, was confirmed by micro Raman spectroscopy. The results showed higher accumulation during the winter months, when boat maintenance activities are peaking and, through repair work, the release of glass fibres in the environment is more likely. Bivalves are considered high risk species due to their sessile nature and extensive filter feeding behaviour. The microparticle inclusion may contribute to adverse impacts on physiological processes and eventually to a decline in the overall health and subsequent death of the animal. The high costs involved in the proper GRP disposal and the lack of recycling facilities worldwide lead to boat abandonement and further contamination of the coasts. For the first time this study presents the extensive fibreglass contamination of natural bivalve populations, in a popular South England sailing harbour, designated a biological and geological site of specific scientific interest (SSRI).

Microplastic contamination in different shell length in Tivela mactroides (Born, 1778)

Microplastic identification and distribution throughout oceans has become a great concern due to its substantial uprising and its consequent interactions with marine biota. Microplastics can be absorbed and adsorbed by several marine species owing to their very small size. Among these organisms are bivalves, including ones used as food for humans. In this context, this research aims to understand the absorption scale of microplastics by Tivela mactroides according to their size and consequently life stage. Thus, T. mactroides mussels were collected at Camburi Beach (Brazil) and grouped into 30 different size classes from 06 to 35 mm. Later, 20 specimens from each size class (N = 600) had the soft tissues removed and a pool was performed through digestion with 10 % KOH solution. Results showed the presence of microplastics in all size classes of T. mactroides, evidencing that organisms from 06 mm can already be contaminated by microplastics and a tendency of the number of microplastics particles to increase as shell size increases. Furthermore, the amount of blue filament-type MPs was significantly higher than the other types and colors. Additionally, analyzes performed by Raman spectroscopy showed that the blue filaments have a PET composition. Finally, larger individuals presented larger quantities of MPs, as well as larger filaments. This might suggest that there are differences between the assimilation of the size of MPs in the different size classes, i.e. that size makes a difference.

Microplastics in rocky shore mollusks of different feeding habits: An assessment of sentinel performance

Microplastics (MPs) accumulation in rocky shore organisms has limited knowledge. This study investigated MPs accumulation in filter-feeding oysters, herbivorous limpets and carnivorous snails to assess their performance as sentinel species in the MPs trophic transfer. The samples were obtained along a contamination gradient in the Santos Estuarine System, Brazil. All three studied species showed MPs concentrations related to the contamination gradient, being the oysters the species that showed the highest levels, followed by limpets and snails (average of less and most contaminated sites of 1.06-8.90, 2.28-5.69 and 0.44-2.10 MP g-1, respectively), suggesting that MPs ingestion rates are linked to feeding habits. MPs were mainly polystyrene and polyacetal. The polymer types did not vary among sites nor species. Despite minor differences in percentages and diversity of size, shape, and color classes, the analyzed species were equally able to demonstrate dominance of small, fiber, transparent, black and blue MPs. Thus, oysters, limpets, and snails are proposed as sentinels of MPs in monitoring assessments.

The impact of microplastics on bivalve mollusks: A bibliometric and scientific review

Bivalves are important members of the ecosystem and their populations are declining globally, making them a concern for their role in ecosystem services and the fishing industry. Bivalves are excellent bioindicators of MPs pollution due to their widespread distribution, filtering capabilities, and close association with human health. Microplastics (MPs) have direct and indirect impacts on bivalves, affecting their physiology, habitat structure, food sources, and persistence of organic pollutants. This review provides an extensive overview of the impact of MPs on bivalves, covering various aspects such as their economic significance, ecological roles, and importance in biomonitoring environmental quality. The article presents the current state of knowledge on the sources and pathways of MPs in aquatic environments and their effects on bivalves. The mechanisms underlying the effects of MPs on bivalves, including ingestion, filtration activity, feeding inhibition, accumulation, bioaccumulation, and reproduction, are also discussed. Additionally, a bibliometric analysis of research on MPs in bivalves is presented, highlighting the number of papers, geographical distribution, and keyword clusters relating to MPs. Finally, the review emphasizes the importance of ongoing research and the development of mitigation strategies to reduce the negative effects of MPs pollution on bivalves and their habitats in oceans and coastal waters.

Oysters and mussels as equivalent sentinels of microplastics and natural particles in coastal environments

Filter-feeder organisms such as oyster and mussels are exposed to particles like microplastics (MPs). Although widely used to monitor MPs contamination, little is known about their performance as sentinels, which are biological monitors accumulating contaminants without significant adverse effects. This study comparatively evaluated the quantitative and qualitative accumulation of MPs by oysters (Crassostrea brasiliana) and mussels (Perna perna) along a gradient of contamination in a highly urbanized estuarine system of Brazil. In the most contaminated site, both species presented the worst status of nutrition and health, and also one of the highest MPs levels reported for molluscs to date (up to 44.1 particles·g^-1). Despite some inter-specific differences, oysters and mussels were suitable and showed an equivalent performance as sentinels, reflecting the gradient condition demonstrated for other contaminants in the region. The similarity in MPs accumulation was also observed for qualitative aspects (polymer composition, sizes, shapes and colors). Particles were mostly <1000 μm, fibrous, colorless and composed by cellulose and polymethyl methacrylate (PMMA). Thus, despite small variations, the usage of C. brasiliana and P. perna is recommended and provides reliable information for environmental levels of microplastics.

Comparison of two rapid automated analysis tools for large FTIR microplastic datasets

One of the biggest issues in microplastic (MP, plastic items  <5 mm) research is the lack of standardisation and harmonisation in all fields, reaching from sampling methodology to sample purification, analytical methods and data analysis. This hampers comparability as well as reproducibility among studies. Concerning chemical analysis of MPs, Fourier-transform infrared (FTIR) spectroscocopy is one of the most powerful tools. Here, focal plane array (FPA) based micro-FTIR (µFTIR) imaging allows for rapid measurement and identification without manual preselection of putative MP and therefore enables large sample throughputs with high spatial resolution. The resulting huge datasets necessitate automated algorithms for data analysis in a reasonable time frame. Although solutions are available, little is known about the comparability or the level of reliability of their output. For the first time, within our study, we compare two well-established and frequently applied data analysis algorithms in regard to results in abundance, polymer composition and size distributions of MP (11-500 µm) derived from selected environmental water samples: (a) the siMPle analysis tool (systematic identification of MicroPlastics in the environment) in combination with MPAPP (MicroPlastic Automated Particle/fibre analysis Pipeline) and (b) the BPF (Bayreuth Particle Finder). The results of our comparison show an overall good accordance but also indicate discrepancies concerning certain polymer types/clusters as well as the smallest MP size classes. Our study further demonstrates that a detailed comparison of MP algorithms is an essential prerequisite for a better comparability of MP data.

Indoor microplastics and bacteria in the atmospheric fallout in urban homes

Humans may be exposed to microplastics (MPs) through food, drink, and air. Although several studies have examined indoor environmental MPs, none have yet compared atmospheric MP and bacterial deposition characteristics among rooms in homes. We investigated indoor airborne MPs and bacteria in five room types (bedroom, dining room, living room, bathroom, and study) based on the duration of usage of each room. We identified synthetic polymers (23,889 MP particles of 21 types) and bacterial communities (383 genera belong to 24 phyla) collected through atmospheric deposition in various rooms of 20 homes. The abundance and composition of MPs are related to the duration of usage, human activities, goods, cleanliness, and the composition of occupants (family members) in households. In addition, the homes of elderly families (age 68-81 years) showed higher bacterial concentrations than those of young families (age 28-35 years), indicating that age markedly affects the structure of household microbiota. Furthermore, a significant correlation between MP concentration and bacterial community structure was observed. The abundances of polyamide (PA), polyurethane (PU), and polyethylene (PE) showed positive correlations with the relative abundances of major bacterial phyla. Taken together, our results suggest that various rooms in the home exhibit distinct MP abundances and bacterial structures that may be affected by age, cleanliness, and human activities.

The relative effects of interspecific and intraspecific diversity on microplastic trapping in coastal biogenic habitats

Our understanding of how anthropogenic stressors such as climate change and plastic pollution interact with biodiversity is being widened to include diversity below the species level, i.e., intraspecific variation. The emerging appreciation of the key ecological importance of intraspecific diversity and its potential loss in the Anthropocene, further highlights the need to assess the relative importance of intraspecific versus interspecific diversity. One such issue is whether a species responds as a homogenous whole to plastic pollution. Using manipulative field transplant experiments and laboratory-controlled hydrodynamic simulations, we assessed the relative effects of intraspecific and interspecific diversity on microplastic trapping in coastal biogenic habitats dominated by two key bioengineers, the brown intertidal macroalgae Fucus vesiculosus and F. guiryi. At the individual level, northern morphotypes of F. guiryi trapped more microplastics than southern individuals, and F. vesiculosus trapped more microplastics than F. guiryi. Canopy density varied among species, however, leading to reversed patterns of microplastic accumulation, with F. guiryi canopies accumulating more microplastics than those of F. vesiculosus, while no differences were observed between the canopies of F. guiryi morphotypes. We emphasize the importance of assessing the effects of intraspecific variation which, along with other crucial factors such as canopy density, flow velocity and polymer composition, modulates the extent of microplastic accumulation in coastal biogenic habitats. Our findings indicate that a realistic estimation of plastic accumulation in biogenic habitats requires an understanding of within- and between-species traits at both the individual and population levels.

How does bivalve size influence microplastics accumulation?

Microplastics (wasted plastic particles < 5 mm in diameter) are ubiquitously distributed in the marine environment. Filter-feeding and low trophic level bivalves are vulnerable to microplastics accumulation from the surrounding depositional environment, thereby threatening both ecological health and human food safety. Microplastics had been detected in lots of coastal Bivalvia species. However, the influence of biological morphology on the mechanism of microplastics accumulation is not clear. There is also a knowledge gap of which species are preferred for commercial consumption, which creates loopholes in risk identification for food safety. A survey on a commercial popular eaten but under-researched hard clam (Meretrix meretrix; Linnaeus, 1758) from a famous fishery port city in southern China was carried out to comprehensively analyze shell size influence on microplastics accumulation in bivalves and consequently, human intake risk via bivalve consumption. Detected microplastics count in per individual (MCI) was 24.64 ± 19.11 items · individual^-1, and microplastics count per gram (MCG; wet weight with shell) was 0.66 ± 0.54 items · g^-1. When the shell width grew by 1 mm, MCI increased by 1.01 times, but MCG decreased by 0.97 times. Dominant microplastics characteristics found in this study was fiber and fragment. Sizes ranged from 25 to 150 μm, and dark colors (black, red, and blue) were found. The mostly common polymers were polyethene (PE, 40%), polyethylene terephthalate (PET, 23%), and polypropylene (PP, 18%). Estimated annual intake (EAI) risk of microplastics via hard clam consumption by residents was 6652.26 ± 5327.28 items · year ^-1 · person ^-1. The microplastics in bivalves and EAI was relatively high. When shell width grew by 1 mm, EAI decreased by 0.97 times. Therefore, eating a fixed amount of larger hard clams with a relatively low amount of microplastics can reduce EAI risk for consumers. A systematic investigation of emission sources along main coast, where bivalve production is prominent will be useful for food safety control in this region.

Microplastics in global bivalve mollusks: A call for protocol standardization

A growing body of evidence shows that microplastic pollution is ubiquitous in bivalve mollusks globally and is of particular concern due to its potential impact on human health. However, non-standardized sampling, processing, and analytical techniques increased the difficulty of direct comparisons among existing studies. Based on 61 peer-reviewed papers, we summarized the current knowledge of microplastics in bivalve mollusks globally and provided an in-depth analysis of factors affecting the outcome of microplastic data, with the main focus on the effects of different species and methodologies. We found no significant differences in microplastic abundance among genera from the same family but significant differences among bivalve families, indicating habitats play an important role in microplastic ingestion by bivalve mollusks. This also provided foundational knowledge for using epifaunal and infaunal bivalves to monitor microplastic pollution in water and sediment, respectively. Recommendations for microplastic monitoring protocol in bivalve mollusks were proposed according to the results of this review, covering (i) a sample size of at least 50 bivalves in the study area, (ii) the use of 10 % KOH as the digestion solution, and (iii) the pore size of a filter membrane of < 5 µm. Acknowledging the need for a standard procedure, more efforts towards protocol standardization used in long-term and large-scale microplastic monitoring programs in bivalve mollusks are needed.

From properties to toxicity: Comparing microplastics to other airborne microparticles

Microplastic (MP) debris is considered as a potentially hazardous material. It is omnipresent in our environment, and evidence that MP is also abundant in the atmosphere is increasing. Consequently, the inhalation of these particles is a significant exposure route to humans. Concerns about potential effects of airborne MP on human health are rising. However, currently, there are not enough studies on the putative toxicity of airborne MP to adequately assess its impact on human health. Therefore, we examined potential drivers of airborne MP toxicity. Physicochemical properties like size, shape, ζ-potential, adsorbed molecules and pathogens, and the MP's bio-persistence have been proposed as possible drivers of MP toxicity. Since their role in MP toxicity is largely unknown, we reviewed the literature on toxicologically well-studied non-plastic airborne microparticles (asbestos, silica, soot, wood, cotton, hay). We aimed to link the observed health effects and toxicology of these microparticles to the abovementioned properties. By comparing this information with studies on the effects of airborne MP, we analyzed possible mechanisms of airborne MP toxicity. Thus, we provide a basis for a mechanistic understanding of airborne MP toxicity. This may enable the assessment of risks associated with airborne MP pollution, facilitating effective policymaking and product design.

Towards Risk Assessments of Microplastics in Bivalve Mollusks Globally

The ubiquitous presence of microplastics in bivalve mollusks and related risks have raised particular concerns. In this study, the available data on the abundance and polymer type of microplastics in bivalves from twenty-two countries were extracted to comprehensively understand the risks of microplastics in bivalves. Following the data from 52 peer-reviewed papers, the abundance, chemical composition, and human exposure risks of microplastics of bivalves among countries were initially assessed. Abundance risk results indicated that bivalves from 22 countries presented a low pollution load index, showing a lower risk level (level I). The polymer risk index (H) of bivalves from Portugal (Hcountry = 1335, level IV) and India (Hcountry = 1187, level IV) were higher than the other countries due to the occurrence of hazardous microplastics, such as polyvinyl chloride. For the human exposure risks, the global mean value of microplastic exposure to humans via mollusk consumption is estimated to be 751 microplastics/capita/year, with the maximum intake by the Chinese. This study suggests that abundance risk may be a fundamental indicator for assessing the potential hazard to humans until the chemical composition risks are confirmed. This study is the first attempt to assess the potential risks of microplastics in bivalves using three evaluation models based on microplastic abundances and polymer types, which will contribute to establishing future human health risk assessment frameworks. These findings will also assist efforts in policy-making to minimize microplastic risks in seafood.

'Ten Years After'-a long-term settlement and bioerosion experiment in an Arctic rhodolith bed (Mosselbukta, Svalbard)

Rhodolith beds and bioherms formed by ecosystem engineering crustose coralline algae support the northernmost centres of carbonate production, referred to as polar cold-water carbonate factories. Yet, little is known about biodiversity and recruitment of these hard-bottom communities or the bioeroders degrading them, and there is a demand for carbonate budgets to include respective rates of polar carbonate build-up and bioerosion. To address these issues, a 10-year settlement and bioerosion experiment was carried out at the Arctic Svalbard archipelago in and downslope of a rhodolith bed. The calcifiers recorded on experimental settlement tiles (56 taxa) were dominated by bryozoans, serpulids and foraminiferans. The majority of the bioerosion traces (30 ichnotaxa) were microborings, followed by attachment etchings and grazing traces. Biodiversity metrics show that calcifier diversity and bioerosion ichnodiversity are both elevated in the rhodolith bed, if compared to adjacent aphotic waters, but these differences are statistically insignificant. Accordingly, there were only low to moderate dissimilarities in the calcifier community structure and bioerosion trace assemblages between the two depth stations (46 and 127 m), substrate orientations (up- and down-facing) and substrate types (PVC and limestone), in that order of relevance. In contrast, surface coverage as well as the carbonate accretion and bioerosion rates were all significantly elevated in the rhodolith bed, reflecting higher abundance or size of calcifiers and bioerosion traces. All three measures were highest for up-facing substrates at 46 m, with a mean coverage of 78.2% (on PVC substrates), a mean accretion rate of 24.6 g m^-2   year^-1 (PVC), and a mean bioerosion rate of -35.1 g m^-2  year^-1 (limestone). Differences in these metrics depend on the same order of factors than the community structure. Considering all limestone substrates of the two platforms, carbonate accretion and bioerosion were nearly in balance at a net rate of -2.5 g m^-2  year^-1 . A latitudinal comparison with previous settlement studies in the North Atlantic suggests that despite the harsh polar environment there is neither a depletion in the diversity of hard-bottom calcifier communities nor in the ichnodiversity of grazing traces, attachment etchings and microborings formed by organotrophs. In contrast, microborings produced by phototrophs are strongly depleted because of limitations in the availability of light (condensed photic zonation, polar night, shading by sea ice). Also, macroborings were almost absent, surprisingly. With respect to carbonate production, the Svalbard carbonate factory marks the low end of a latitudinal gradient while bioerosion rates are similar or even higher than at comparable depth or photic regime at lower latitudes, although this might not apply to shallow euphotic waters (not covered in our experiment), given the observed depletion in bioeroding microphytes and macroborers. While echinoid grazing is particularly relevant for the bioerosion in the rhodolith bed, respective rates are far lower than those reported from tropical shallow-water coral reefs. The slow pace of carbonate production but relatively high rates of bioerosion (both promoted by low carbonate supersaturation states in Arctic waters), in concert with high retention of skeletal carbonates on the seafloor and no calcite cements forming in open pore space created by microborers, suggest a low fossilisation potential for polar carbonates, such as those formed in the Mosselbukta rhodolith beds.