The combination of mesoglycan and VEGF promotes skin wound repair by enhancing the activation of endothelial cells and fibroblasts and their cross-talk

Bioactive poly(salicylic acid)-poly(citric acid) scaffolds improve diabetic wound repair via regulating HIF-1α, Nrf2 and macrophage

Diabetic wounds environment is over-oxidized, over-inflammatory, leading to difficulties in regenerating blood vessels, and retardation of healing in diabetic wounds. Therefore, diabetic wounds can be treated from the perspective of scavenging oxidative free radicals and reducing the level of inflammation. Herein, we report a bioactive poly(salicylic acid)-poly(citric acid) (FPSa-PCG) hydrogel for diabetic wound repair. The FPSa-PCG hydrogel shows abilities of antioxidation, anti-inflammation, and regulation of macrophage phenotype. The FPSa-PCG hydrogel showed good biocompatibility, and obtain the abilities of promotion of macrophages migration, reduction of ROS generation, suppression of the M1-type macrophage polarization. FPSa and PCG could synergistically enhance the angiogenesis through upregulating the mRNA expression of HIF1Α, VEGF, and CD31 in endothelial cells and reduce the ROS level of macrophages through upregulating the mRNA expression of Nrf2. The in vivo diabetic wound model confirmed the promoting effect of FPSa-PCG hydrogel on wound closure in diabetes. The further studies found that FPSa-PCG hydrogel could induce the CD31 protein expression in the subcutaneous tissue and inhibit the TNF-a protein expression. This work shows that the simple composition FPSa-PCG hydrogel has a promising therapeutic potential in the treatment of diabetic wounds.

The pro-healing effects of heparan sulfate and growth factors are enhanced by the heparinase enzyme: New association for skin wound healing treatment

Effective treatment strategies for skin wound repair are the focus of numerous studies. New pharmacological approaches appear necessary to guarantee a correct and healthy tissue regeneration. For these reasons, we purposed to investigate the effects of the combination between heparan sulfate and growth factors further adding the heparinase enzyme. Interestingly, for the first time, we have found that this whole association retains a marked pro-healing activity when topically administered to the wound. In detail, this combination significantly enhances the motility and activation of the main cell populations involved in tissue regeneration (keratinocytes, fibroblasts and endothelial cells), compared with single agents administered without heparinase. Notably, using an experimental C57BL/6 mouse model of skin wounding, we observed that the topical treatment of skin lesions with heparan sulfate + growth factors + heparinase promotes the highest closure of wounds compared to each substance mixed with the other ones in all the possible combinations. Eosin/hematoxylin staining of skin biopsies revealed that treatment with the whole combination allows the formation of a well-structured matrix with numerous new vessels. Confocal analyses for vimentin, FAP1α, CK10 and CD31 have highlighted the presence of activated fibroblasts, differentiated keratinocytes and endothelial cells at the closed region of wounds. Our results encourage defining this combined treatment as a new and appealing therapy expedient in skin wound healing, as it is able to activate cell components and promote a dynamic lesions closure.

Antibacterial and bioactive multilayer electrospun wound dressings based on hyaluronic acid and lactose-modified chitosan

Antibacterial multilayer electrospun matrices based on hyaluronic acid (HA) and a lactose-modified chitosan (CTL) were synthetized (i) by combining electrospun polycaprolactone (PCL) and polysaccharidic matrices in a bilayer device and (ii) by sequentially coating the PCL mat with CTL and HA. In both cases, the antibacterial activity was provided by loading rifampicin within the PCL support. All matrices disclosed suitable morphology and physicochemical properties to be employed as wound dressings. Indeed, both the bilayer and coated fibers showed an optimal swelling capacity (3426 ± 492 % and 1435 ± 251 % after 7 days, respectively) and water vapor permeability (160 ± 0.78 g/m2h and 170 ± 12 g/m2h at 7 days, respectively). On the other hand, the polysaccharidic dressings were completely wettable in the presence of various types of fluids. Depending on the preparation method, a different release of both polysaccharides and rifampicin was detected, and the immediate polysaccharide dissolution from the bilayer structure impacted the antibiotic release (42 ± 4 % from the bilayer structure against 25 ± 2 % from the coated fibers in 4 h). All the multilayer matrices, regardless of their production strategy and composition, revealed optimal biocompatibility and bioactivity with human dermal fibroblasts, as the released bioactive polysaccharides induced a faster wound closure in the cell monolayer (100 % in 24 h) compared to the controls (78 ± 8 % for untreated cells and 89 ± 5 % for cells treated with PCL alone, after 24 h). The inhibitory and bactericidal effects of the rifampicin loaded matrices were assessed on S. aureus, S. epidermidis, E. coli, and P. aeruginosa. The antibacterial matrices were found to be highly effective except for E. coli, which was more resistant even at higher amounts of rifampicin, with a bacterial concentration of 6.4 ± 0.4 log CFU/mL and 6.8 ± 0.3 log CFU/mL after 4 h in the presence of the rifampicin-loaded bilayer and coated matrices, respectively.

Facile fabrication of carboxymethylcellulose/ZnO/g-C3N4 containing nutmeg extract with photocatalytic performance for infected wound healing

New topical antibacterial agents are required to inhibit and development of bacteria and also promoting the wound healing process. This study was evaluating the healing effect of Myristica fragrans extract coated with carboxymethyl cellulose, zinc oxide and graphite carbon nitride (CMC/ZnO/g-C3N4/MyR) by photocatalytic process on the healing process of full-thickness infectious excision wounds in mice. Nanosheets were prepared and physicochemical properties were evaluated. Safety, in vitro release, antibacterial activities under in vitro and in vivo condition, wound contraction, histopathological properties and the protein expressions of tumor necrosis factor-α (TNF-α), collagen 1A (COL1A) and CD31 were also evaluated. Physicochemical properties confirmed their successful synthesis. Nanosheets exhibited antibacterial activity under in vitro and in vivo conditions. The formulations containing CMC/ZnO/g-C3N4/MyR, significantly (P < 0.05) competed with standard ointment of mupirocin for accelerating the wound healing process due to their effects on bacterial count and the expression of TNF-α and also accelerating the proliferative phase. This structure can be used as a safe structure in combination with other agents for accelerating the wound healing process following future clinical studies.

Utilization of Lyotropic Liquid Crystalline Gels for Chronic Wound Management

Management of chronic wounds is becoming a serious health problem worldwide. To treat chronic wounds, a suitable healing environment and sustained delivery of growth factors must be guaranteed. Different therapies have been applied for the treatment of chronic wounds such as debridement and photodynamic therapy. Among them, growth factors are widely used therapeutic drugs. However, at present, growth factor delivery systems cannot meet the demand of clinical practice; therefore new methods should be developed to meet the emerging need. For this reason, researchers have tried to modify hydrogels through some methods such as chemical synthesis and molecule modifications to enhance their properties. However, there are still a large number of limitations in practical use like byproduct problems, difficulty to industrialize, and instability of growth factor. Moreover, applications of new materials like lyotropic liquid crystalline (LLC) on chronic wounds have emerged as a new trend. The structure of LLC is endowed with many excellent properties including low cost, ordered structure, and excellent loading efficiency. LLC can provide a moist local environment for the wound, and its lattice structure can embed the growth factors in the water channel. Growth factor is released from the high-concentration carrier to the low-concentration release medium, which can be precisely regulated. Therefore, it can provide sustained and stable delivery of growth factors as well as a suitable healing environment for wounds, which is a promising candidate for chronic wound healing and has a broad prospective application. In conclusion, more reliable and applicable drug delivery systems should be designed and tested to improve the therapy and management of chronic wounds.

Effects of Bacterial Lysates and Metabolites on Collagen Homeostasis in TNF-α-Challenged Human Dermal Fibroblasts

During skin aging, the production of extracellular matrix (ECM) proteins, such as type I collagen, decreases and the synthesis of ECM-degrading matrix metalloproteinases (MMPs) rises, leading to an imbalance in homeostasis and to wrinkle formation. In this study, we examined the effects of bacterial lysates and metabolites from three bifidobacteria and five lactobacilli on collagen homeostasis in human dermal fibroblasts during challenge with tumor necrosis factor alpha (TNF-α), modeling an inflammatory condition that damages the skin's structure. Antiaging properties were measured, based on fibroblast cell viability and confluence, amount of type I pro-collagen, ratio of MMP-1 to type I pro-collagen, cytokines, and growth factors. The TNF-α challenge increased the MMP-1/type I pro-collagen ratio and levels of proinflammatory cytokines, as expected. With the probiotics, differences were clearly dependent on bacterial species, strain, and form. In general, the lysates elicited less pronounced responses in the biomarkers. Of all strains, the Bifidobacterium animalis ssp. lactis strains Bl-04 and B420 best maintained type I pro-collagen production and the MMP-1/collagen type I ratio under no-challenge and challenge conditions. Metabolites that were produced by bifidobacteria, but not their lysates, reduced several proinflammatory cytokines (IL-6, IL-8, and TNF-α) during the challenge, whereas those from lactobacilli did not. These results indicate that B. animalis ssp. lactis-produced metabolites, especially those of strains Bl-04 and B420, could support collagen homeostasis in the skin.

Activated fibroblasts in cancer: Perspectives and challenges

Activated fibroblasts in tumors, or cancer-associated fibroblasts (CAFs), have become a popular research area over the past decade. As important players in many aspects of tumor biology, with functions ranging from collagen deposition to immunosuppression, CAFs have been the target of clinical and pre-clinical studies that have revealed their potential pro- and anti-tumorigenic dichotomy. In this review, we describe the important role of CAFs in the tumor microenvironment and the technological advances that made these discoveries possible, and we detail the models that are currently available for CAF investigation. Additionally, we present evidence to support the value of encompassing CAF investigation as a future therapeutic avenue alongside immune and cancer cells while highlighting the challenges that must be addressed for successful clinical translation of new findings.

Light-Mediated 3D Printing of Micro-Pyramid-Decorated Tailorable Wound Dressings with Endogenous Growth Factor Sequestration for Improved Wound Healing

Medical dressings play an important role in the field of tissue engineering owing to their ability to accelerate the process of wound healing. Great efforts have been made to fabricate wound dressings with distinctive features for promoting wound healing. However, most of the current synthesis methods either generate dressings of uniform size or involve complex fabrication techniques, thus limiting their commercialization for the personalized dressings. We report here a dressing, which presents a paradigm shift in the design of the dressing from uniform films to a micro-patterned film. The hypothesis driving the design is the ability of the 3D patterns to provide an efficient transient matrix filling the depth of the wound rather than just providing a barrier and slight re-epithelialization. We demonstrate the use of the digital light processing 3D printing technique to generate micro-pyramid-decorated wound healing dressings with individualized design and with bio-compatible gelatin methacryloyl to contact the wounded areas. In addition to providing better adhesion to the migratory cells, the micro-pyramids also enable covalent conjugation of heparin, providing capability to sequester endogenous growth factors (GFs). Based on these advantages, the developed dressing not only adheres strongly to the wound bed but also promotes the treatment of a rat wound model by utilizing the power of endogenous GFs for tissue regeneration. Thus, it is believed that the developed dressing can break through the limitation of traditional wound treatment and be an ideal candidate for wound healing.

A Comprehensive Review on Bio-Based Materials for Chronic Diabetic Wounds

Globally, millions of people suffer from poor wound healing, which is associated with higher mortality rates and higher healthcare costs. There are several factors that can complicate the healing process of wounds, including inadequate conditions for cell migration, proliferation, and angiogenesis, microbial infections, and prolonged inflammatory responses. Current therapeutic methods have not yet been able to resolve several primary problems; therefore, their effectiveness is limited. As a result of their remarkable properties, bio-based materials have been demonstrated to have a significant impact on wound healing in recent years. In the wound microenvironment, bio-based materials can stimulate numerous cellular and molecular processes that may enhance healing by inhibiting the growth of pathogens, preventing inflammation, and stimulating angiogenesis, potentially converting a non-healing environment to an appropriately healing one. The aim of this present review article is to provide an overview of the mechanisms underlying wound healing and its pathophysiology. The development of bio-based nanomaterials for chronic diabetic wounds as well as novel methodologies for stimulating wound healing mechanisms are also discussed.

Biomaterials and Tissue Engineering Approaches using Glycosaminoglycans for Tissue Repair: Lessons Learned from the Native Extracellular Matrix

Glycosaminoglycans (GAGs) are an important component of the extracellular matrix as they influence cell behavior and have been sought for tissue regeneration, biomaterials, and drug delivery applications. GAGs are known to interact with growth factors and other bioactive molecules and impact tissue mechanics. This review will provide an overview of native GAGs, their structure, and properties, specifically their interaction with proteins, their effect on cell behavior, and their mechanical role in the ECM. GAGs' function in the extracellular environment is still being understood however, promising studies have led to the development of medical devices and therapies. Native GAGs, including hyaluronic acid, chondroitin sulfate, and heparin, have been widely explored in tissue engineering and biomaterial approaches for tissue repair or replacement. This review will focus on orthopaedic and wound healing applications. The use of GAGs in these applications have had significant advances leading to clinical use. Promising studies using GAG mimetics and future directions will also be discussed. STATEMENT OF SIGNIFICANCE: Glycosaminoglycans (GAGs) are an important component of the native extracellular matrix and have shown promise in medical devices and therapies. This review emphasizes the structure and properties of native GAGs, their role in the ECM providing biochemical and mechanical cues that influence cell behavior, and their use in tissue regeneration and biomaterial approaches for orthopaedic and wound healing applications.

Production of Mesoglycan/PCL Based Composites through Supercritical Impregnation

The development of targeted therapies for wound repair is knowing a growing interest due to the increasing aging of the population and the incidence of chronic pathologies, mainly pressure ulcers. Among molecules recruiting cell populations and promoting the formation of new vital tissue, sodium mesoglycan (MSG) has been proven to be effective in wound healing. In this work, MSG impregnation of polymer matrices has been attempted by a supercritical carbon dioxide-based process. Polymeric matrices are composed of polycaprolactone blends, where water-soluble polymers, polyethylene glycol, polyvinyl pyrrolidone, gelatin, and thermoplastic starch, have been employed to modulate the MSG release, making the devices potentially suitable for topical administrations. Two different techniques have been used to obtain the films: the first one is compression molding, producing compact and continuous structures, and the second one is electrospinning, producing membrane-like designs. A higher amount of MSG can be loaded into the polymeric matrix in the membrane-like structures since, in these films, the impregnation process is faster than in the case of compression molded films, where the carbon dioxide has firstly diffused and then released the active molecule. The type of water-soluble polymer influences the drug release rate: the blend polycaprolactone-gelatin gives a prolonged release potentially suitable for topical administration.