Defects in bilayer silica and graphene: common trends in diverse hexagonal two-dimensional systems

NanoTube Construct: A web tool for the digital construction of nanotubes of single-layer materials and the calculation of their atomistic descriptors powered by Enalos Cloud Platform

NanoTube Construct is a web tool for the digital construction of nanotubes based on real and hypothetical single-layer materials including carbon-based materials such as graphene, graphane, graphyne polymorphs, graphidiyene and non-carbon materials such as silicene, germanene, boron nitride, hexagonal bilayer silica, haeckelite silica, molybdene disulfide and tungsten disulfide. Contrary to other available tools, NanoTube Construct has the following features: a) it is not limited to zero thickness materials with specific symmetry, b) it applies energy minimisation to the geometrically constructed Nanotubes to generate realistic ones, c) it derives atomistic descriptors (e.g., the average potential energy per atom, the average coordination number, etc.), d) it provides the primitive unit cell of the constructed Nanotube which corresponds to the selected rolling vector (i.e., the direction in which the starting nanosheet is rolled to form a tube), e) it calculates whether the Nanotube or its corresponding nanosheet is more energetically stable and f) it allows negative chirality indexes. Application of NanoTube Construct for the construction of energy minimised graphane and molybdenum disulfide nanotubes are presented, showcasing the tool's capability. NanoTube Construct is freely accessible through the Enalos Cloud Platform (https://enaloscloud.novamechanics.com/diagonal/nanotube/).

Heptacyclic aromatic hydrocarbon isomers with two azulene units fused

Azulene, known for its unique electronic properties and structural asymmetry, serves as a promising building block for the design of novel non-benzenoid polycyclic aromatic hydrocarbons (PAHs). Herein, we present the synthesis, characterization, and physical properties of three diazulene-fused heptacyclic aromatic hydrocarbons, 8,17-dioctyldiazuleno[2,1-a:2',1'-h]anthracene (trans configuration), 16,18-dioctyldiazuleno[2,1-a:1',2'-j]anthracene (cis configuration) and 3,18-dioctyldiazuleno[2,1-a:1',2'-i]phenanthrene (zigzag configuration). Three compounds are configurational isomers with different fusing patterns of aromatic rings. All three isomers exhibit pronounced aromaticity, as revealed by nuclear magnetic resonance spectroscopy and theoretical calculations. They exhibit characteristics of both azulene and benzenoid PAHs and are much more stable than their all-benzene analogues. The optical and electrochemical properties of these three isomers were investigated through UV-vis absorption spectra and cyclic voltammetry, revealing distinct behaviors influenced by their molecular configurations. Furthermore, the isomer in trans configuration exhibits promising semiconducting properties with a hole mobility of up to 0.22 cm2 V-1 s-1, indicating its potential in organic electronics applications.

Carbon rich media for luminescence-based surface dosimetry and study of associated surface defects

The present study continues research into the utilisation of carbonaceous media for medical radiation dosimetry, focusing on the effects of surface area-to-volume ratio and carbon content on structural interaction alterations and dosimetric properties in sheet- and bead-type graphitic materials (with the respective carbon content of ∼98 wt% and ∼90 wt%). Using ⁶⁰Co gamma-rays and doses from 0.5 Gy to 20 Gy, the study has been made of the response of commercially available graphite in the form of 0.1 mm, 0.2 mm, 0.3 mm and 0.5 mm thick sheets, also of activated carbon beads. Confocal Raman and photoluminescence spectroscopy have been employed, examining radiation-induced structural interaction alterations. Dose-dependent variation in the Raman intensity ratio I_D/I_G relates to the varying dominance of defect generation and dose-driven defect annealing. Of the various thickness graphite sheets, the 0.1 mm thick medium possesses the greatest surface area-to-volume ratio. Perhaps unsurprisingly, it also exhibits the greatest thermoluminescence (TL) yield compared to that of the other carbonaceous sheet foils used herein. Moreover, the second greatest mass-normalised TL yield has been observed to be that of the porous beads, reflected in the greater defect density (I_D/I_G > 2) when compared to the other media, due in part to their inherent feature of large internal surface area. Considering the challenge posed in matching skin thickness with skin dose, the near tissue equivalent graphite sheets show particular promise as a skin dosimeter, sensitive as a function of depth.

Electron-Beam- and Thermal-Annealing-Induced Structural Transformations in Few-Layer MnPS3

Quasi-two-dimensional (2D) manganese phosphorus trisulfide, MnPS₃, which exhibits antiferromagnetic ordering, is a particularly interesting material in the context of magnetism in a system with reduced dimensionality and its potential technological applications. Here, we present an experimental and theoretical study on modifying the properties of freestanding MnPS₃ by local structural transformations via electron irradiation in a transmission electron microscope and by thermal annealing under vacuum. In both cases we find that MnS_1-xP_x phases (0 ≤ x < 1) form in a crystal structure different from that of the host material, namely that of the α- or γ-MnS type. These phase transformations can both be locally controlled by the size of the electron beam as well as by the total applied electron dose and simultaneously imaged at the atomic scale. For the MnS structures generated in this process, our ab initio calculations indicate that their electronic and magnetic properties strongly depend on both in-plane crystallite orientation and thickness. Moreover, the electronic properties of the MnS phases can be further tuned by alloying with phosphorus. Therefore, our results show that electron beam irradiation and thermal annealing can be utilized to grow phases with distinct properties starting from freestanding quasi-2D MnPS₃.

2D honeycomb transformation into dodecagonal quasicrystals driven by electrostatic forces

Dodecagonal oxide quasicrystals are well established as examples of long-range aperiodic order in two dimensions. However, despite investigations by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), low-energy electron microscopy (LEEM), photoemission spectroscopy as well as density functional theory (DFT), their structure is still controversial. Furthermore, the principles that guide the formation of quasicrystals (QCs) in oxides are elusive since the principles that are known to drive metallic QCs are expected to fail for oxides. Here we demonstrate the solution of the oxide QC structure by synchrotron-radiation based surface x-ray diffraction (SXRD) refinement of its largest-known approximant. The oxide QC formation is forced by large alkaline earth metal atoms and the reduction of their mutual electrostatic repulsion. It drives the n = 6 structure of the 2D Ti₂O₃ honeycomb arrangement via Stone-Wales transformations into an ordered structure with empty n = 4, singly occupied n = 7 and doubly occupied n = 10 rings, as supported by DFT.

Synthesis of Defective Nanographenes Containing Joined Pentagons and Heptagons

Defective nanographenes containing joined pentagons and heptagons exhibit striking physicochemical properties from both experimental and theoretical perspectives compared with their pure hexagonal counterparts. Thus, the synthesis and characterization of these unique polyarenes with well-defined defective topologies have attracted increasing attention. Despite extensive research on nonalternant molecules since the last century, most studies focused on the corresponding mutagenic and carcinogenic activities. Recently, researchers have realized that the defective domain induces geometric bending and causes electronic perturbation, thus leading to significant alteration of the photophysical properties. This review discusses the synthesis and characterization of small nonalternant polycyclic hydrocarbons in the early stage and recent developments in embedding pentagon-heptagon (5-7) pairs into large carbon skeletons through in-solution chemistry.

Two-Dimensional Ultrathin Silica Films

Two-dimensional (2D) ultrathin silica films have the potential to reach technological importance in electronics and catalysis. Several well-defined 2D-silica structures have been synthesized so far. The silica bilayer represents a 2D material with SiO₂ stoichiometry. It consists of precisely two layers of tetrahedral [SiO₄] building blocks, corner connected via oxygen bridges, thus forming a self-saturated silicon dioxide sheet with a thickness of ∼0.5 nm. Inspired by recent successful preparations and characterizations of these 2D-silica model systems, scientists now can forge novel concepts for realistic systems, particularly by atomic-scale studies with the most powerful and advanced surface science techniques and density functional theory calculations. This Review provides a solid introduction to these recent developments, breakthroughs, and implications on ultrathin 2D-silica films, including their atomic/electronic structures, chemical modifications, atom/molecule adsorptions, and catalytic reactivity properties, which can help to stimulate further investigations and understandings of these fundamentally important 2D materials.

Progress in Diamanes and Diamanoids Nanosystems for Emerging Technologies

New materials are the backbone of their technology-driven modern civilization and at present carbon nanostructures are the leading candidates that have attracted huge research activities. Diamanes and diamanoids are the new nanoallotropes of sp3 hybridized carbon which can be fabricated by proper functionalization, substitution, and via Birch reduction under controlled pressure using graphitic system as a precursor. These nanoallotropes exhibit outstanding electrical, thermal, optical, vibrational, and mechanical properties, which can be an asset for new technologies, especially for quantum devices, photonics, and space technologies. Moreover, the features like wide bandgap, tunable thermal conductivity, excellent thermal insulation, etc. make diamanes and diamanoids ideal candidates for nano-electrical devices, nano-resonators, optical waveguides, and the next generation thermal management systems. In this review, diamanes and diamanoids are discussed in detail in terms of its historical prospect, method of synthesis, structural features, broad properties, and cutting-edge applications. Additionally, the prospects of diamanes and diamanoids for new applications are carefully discussed. This review aims to provide a critical update with important ideas for a new generation of quantum devices based on diamanes and diamanoids which are going to be an important topic in the future of carbon nanotechnology.

Phonons as a platform for non-Abelian braiding and its manifestation in layered silicates

Topological phases of matter have revolutionised the fundamental understanding of band theory and hold great promise for next-generation technologies such as low-power electronics or quantum computers. Single-gap topologies have been extensively explored, and a large number of materials have been theoretically proposed and experimentally observed. These ideas have recently been extended to multi-gap topologies with band nodes that carry non-Abelian charges, characterised by invariants that arise by the momentum space braiding of such nodes. However, the constraints placed by the Fermi-Dirac distribution to electronic systems have so far prevented the experimental observation of multi-gap topologies in real materials. Here, we show that multi-gap topologies and the accompanying phase transitions driven by braiding processes can be readily observed in the bosonic phonon spectra of known monolayer silicates. The associated braiding process can be controlled by means of an electric field and epitaxial strain, and involves, for the first time, more than three bands. Finally, we propose that the band inversion processes at the Γ point can be tracked by following the evolution of the Raman spectrum, providing a clear signature for the experimental verification of the band inversion accompanied by the braiding process.

Structural evolution of two-dimensional silicates using a "bond-switching" algorithm

Silicates are the most abundant materials in the earth's crust. In recent years, two-dimensional (2D) versions of them grown on metal supports (known as bilayer silicates) have allowed their study in detail down to the atomic scale. These structures are self-containing. They are not covalently bound to the metal support but interact with it through van der Waals forces. Like their three-dimensional counterparts, the 2D-silicates can form both crystalline and vitreous structures. Furthermore, the interconversion between vitreous to crystalline structures has been experimentally observed at the nanoscale. While theoretical work has been carried out to try to understand these transformations, a limitation for ab initio methods, and even molecular dynamics methods, is the computational cost of studying large systems and long timescales. In this work, we present a simple and computationally inexpensive approach, that can be used to represent the evolution of bilayer silicates using a bond-switching algorithm. This approach allows reaching equilibrium ring size distributions as a function of a parameter that can be related to the ratio between temperature and the energy required for the bond-switching event. The ring size distributions are compared to experimental data available in the literature.

A Silica Bilayer Supported on Ru(0001): Following the Crystalline-to Vitreous Transformation in Real Time with Spectro-microscopy

The crystalline-to-vitreous phase transformation of a SiO2 bilayer supported on Ru(0001) was studied by time-dependent LEED, local XPS, and DFT calculations. The silica bilayer system has parallels to 3D silica glass and can be used to understand the mechanism of the disorder transition. DFT simulations show that the formation of a Stone-Wales-type of defect follows a complex mechanism, where the two layers show decoupled behavior in terms of chemical bond rearrangements. The calculated activation energy of the rate-determining step for the formation of a Stone-Wales-type of defect (4.3 eV) agrees with the experimental value. Charge transfer between SiO2 bilayer and Ru(0001) support lowers the activation energy for breaking the Si-O bond compared to the unsupported film. Pre-exponential factors obtained in UHV and in O2 atmospheres differ significantly, suggesting that the interfacial ORu underneath the SiO2 bilayer plays a role on how the disordering propagates within the film.

Direct Observation of Topological Defects in Striped Block Copolymer Discs and Polymersomes

Topology and defects are of fundamental importance for ordered structures on all length scales. Despite extensive research on block copolymer self-assembly in solution, knowledge about topological defects and their effect on nanostructure formation has remained limited. Here, we report on the self-assembly of block copolymer discs and polymersomes with a cylinder line pattern on the surface that develops specific combinations of topological defects to satisfy the Euler characteristics for closed spheres as described by Gauss-Bonnet theorem. The dimension of the line pattern allows the direct visualization of defect emergence, evolution, and annihilation. On discs, cylinders either form end-caps that coincide with λ^+1/2 disclinations or they bend around τ^+1/2 disclinations in 180° turns (hairpin loops). On polymersomes, two λ^+1/2 defects connect into three-dimensional (3D) Archimedean spirals, while two τ^+1/2 defects form 3D Fermat spirals. Electron tomography reveals two complementary line patterns on the inside and outside of the polymersome membrane, where λ^+1/2 and τ^+1/2 disclinations always eclipse on opposing sides ("defect communication"). Attractive defects are able to annihilate with each other into +1 disclinations and stabilize anisotropic polymersomes with sharp tips through screening of high-energy curvature. This study fosters our understanding of the behavior of topological defects in self-assembled polymer materials and aids in the design of polymersomes with preprogrammed shapes governed by synthetic block length and topological rules.

Generalized network theory of physical two-dimensional systems

The properties of a wide range of two-dimensional network materials are investigated by developing a generalized network theory. The methods developed are shown to be applicable to a wide range of systems generated from both computation and experiment; incorporating atomistic materials, foams, fullerenes, colloidal monolayers, and geopolitical regions. The ring structure in physical networks is described in terms of the node degree distribution and the assortativity. These quantities are linked to previous empirical measures such as Lemaître's law and the Aboav-Weaire law. The effect on these network properties is explored by systematically changing the coordination environments, topologies, and underlying potential model of the physical system.

Tuning two-dimensional phase formation through epitaxial strain and growth conditions: silica and silicate on NixPd1-x(111) alloy substrates

Two-dimensional (2D) materials can have multiple phases close in energy but with distinct properties, with the phases that form during growth dependent on experimental conditions and the growth substrate. Here, the competition between 2D van der Waals (VDW) silica and 2D Ni silicate phases on Ni_xPd_1-x(111) alloy substrates was systematically investigated experimentally as a function of Si surface coverage, annealing time and temperature, O₂ partial pressure, and substrate composition and the results were compared with thermodynamic predictions based on density functional theory (DFT) calculations and thermochemical data for O₂. Experimentally, 2D Ni silicate was exclusively observed at higher O₂ pressures (∼10^-6 Torr), higher annealing temperatures (1000 K), and more prolonged annealing (10 min) if the substrate contained any Ni and for initial Si coverages up to 2 monolayers. In contrast, decreasing the O₂ pressure to ∼10^-8 Torr and restricting the annealing temperature and time enabled 2D VDW silica formation. Amorphous 2D VDW silica was observed even when the substrate composition was tuned to lattice match crystalline 2D VDW silica. The trend of decreased O₂ pressure favoring 2D VDW silica was consistent with the theoretical predictions; however, theory also suggested that sufficient Si coverage could avoid Ni silicate formation. The effect of epitaxial strain on 2D Ni silicate was investigated by modifying the solid solution alloy substrate composition. It was found that 2D Ni silicate will stretch to match the substrate lattice constant up to 1.12% tensile strain. When the lattice mismatch was over 1.40%, incommensurate crystalline domains were observed, indicating relaxation of the overlayer to its favored lattice constant. The limited epitaxial strain that could be applied was attributed to a combination of the 2D silicate stiffness, the insensitivity of its bonding to the substrate to its alignment with the substrate, and its lack of accessible structural rearrangements that can reduce the strain energy. The results demonstrate how the resulting 2D material can be manipulated through the growth conditions and how a solid solution alloy substrate can be used to maximize the epitaxial strain imparted to the 2D system.

Electronic Band Structure of Ultimately Thin Silicon Oxide on Ru(0001)

Silicon oxide can be formed in a crystalline form, when prepared on a metallic substrate. It is a candidate support catalyst and possibly the ultimately thin version of a dielectric host material for two-dimensional materials and heterostructures. We determine the atomic structure and chemical bonding of the ultimately thin version of the oxide, epitaxially grown on Ru(0001). In particular, we establish the existence of two sublattices defined by metal-oxygen-silicon bridges involving inequivalent substrate sites. We further discover four electronic bands below the Fermi level, at high binding energy, two of them having a linear dispersion at their crossing K point (Dirac cones) and two others forming semiflat bands. While the latter two correspond to hybridized states between the oxide and the metal, the former relate to the topmost silicon-oxygen plane, which is not directly coupled to the substrate. Our analysis is based on high-resolution X-ray photoelectron spectroscopy, angle-resolved photoemission spectroscopy, scanning tunneling microscopy, and density functional theory calculations.

Study of Implantation Defects in CVD Graphene by Optical and Electrical Methods

A Chemical Vapor Deposition graphene monolayer grown on 6H–SiC (0001) substrates was used for implantation experiments. The graphene samples were irradiated by He+ and N+ ions. The Raman spectra and electrical transport parameters were measured as a function of increasing implantation fluence. The defect concentration was determined from intensity ratio of the Raman D and G peaks, while the carrier’s concentration was determined from the relations between G and 2D Raman modes energies. It was found that the number of defects generated by one ion is 0.0025 and 0.045 and the mean defect radius about 1.5 and 1.34 nm for He+ and N+, respectively. Hole concentration and mobility were determined from van der Pauw measurements. It was found that mobility decreases nearly by three orders of magnitude with increase of defect concentration. The inverse of mobility versus defect concentration is a linear function, which indicates that the main scattering mechanism is related to defects generated by ion implantation. The slope of inverse mobility versus defect concentration provides the value of defect radius responsible for scattering carriers at about 0.75 nm. This estimated defect radius indicates that the scattering centres most likely consist of reconstructed divacancies or larger vacancy complexes.

Influence of the support on stabilizing local defects in strained monolayer oxide films

Two-dimensional materials with a honeycomb lattice, such as graphene and hexagonal boron nitride, often contain local defects in which the hexagonal elements are replaced by four-, five-, seven-, and eight-membered rings. An example is the Stone-Wales (S-W) defect, where a bond rotation causes four hexagons to be transformed into a cluster of two pentagons and two heptagons. A further series of similar defects incorporating divacancies results in larger structures of non-hexagonal elements. In this paper, we use scanning tunneling microscopy (STM) and density functional theory (DFT) modeling to investigate the structure and energetics of S-W and divacancy defects in a honeycomb (2 × 2) Ti2O3 monolayer grown on an Au(111) substrate. The epitaxial rumpled Ti2O3 monolayer is pseudomorphic and in a state of elastic compression. As a consequence, divacancy defects, which induce tension in freestanding films, relieve the compression in the epitaxial Ti2O3 monolayer and therefore have significantly lower energies when compared with their freestanding counterparts. We find that at the divacancy defect sites there is a local reduction of the charge transfer between the film and the substrate, the rumpling is reduced, and the film has an increased separation from the substrate. Our results demonstrate the capacity of the substrate to significantly influence the energetics, and hence favor vacancy-type defects, in compressively strained 2D materials. This approach could be applied more broadly, for example to tensile monolayers, where vacancy-type defects would be rare and interstitial-type defects might be favored.

Impact of a van der Waals interface on intrinsic and extrinsic defects in an MoSe2 monolayer

In this work, we study growth and migration of atomic defects in MoSe₂ on graphene using multiple advanced transmission electron microscopy techniques to explore defect behavior in vdW heterostructures. A MoSe₂/graphene vdW heterostructure is prepared by a direct growth of both monolayers, thereby attaining an ideal vdW interface between the monolayers. We investigate the intrinsic defects (inversion domains and grain boundaries) in synthesized MoSe₂, their evolution amid growth processing steps, and their influence on the formation and movement of extrinsic defects. Electron diffraction identifies a preferential interlayer orientation of 2° between MoSe₂ and graphene, which is caused by the presence of intrinsic IBD defects. Extrinsic defects (point and line defects) are generated by in situ electron irradiation in the MoSe₂ layer. Our results shed light on how to independently modify the MoSe₂ atomic structure in vdW heterostructures for potential utilization in device processing.

Highly Surface-Active Ca(OH)2 Monolayer as a CO2 Capture Material

Greenhouse gas emissions originating from fossil fuel combustion contribute significantly to global warming, and therefore the design of novel materials that efficiently capture CO₂ can play a crucial role in solving this challenge. Here, we show that reducing the dimensionality of bulk crystalline portlandite results in a stable monolayer material, named portlandene, that is highly effective at capturing CO₂. On the basis of theoretical analysis comprised of ab initio quantum mechanical calculations and force-field molecular dynamics simulations, we show that this single-layer phase is robust and maintains its stability even at high temperatures. The chemical activity of portlandene is seen to further increase upon defect engineering of its surface using vacancy sites. Defect-containing portlandene is capable of separating CO and CO₂ from a syngas (CO/CO₂/H₂) stream, yet is inert to water vapor. This selective behavior and the associated mechanisms have been elucidated by examining the electronic structure, local charge distribution, and bonding orbitals of portlandene. Additionally, unlike conventional CO₂ capturing technologies, the regeneration process of portlandene does not require high temperature heat treatment because it can release the captured CO₂ by application of a mild external electric field, making portlandene an ideal CO₂ capturing material for both pre- and postcombustion processes.

Modelling the atomic arrangement of amorphous 2D silica: a network analysis

The recent experimental discovery of a semi two-dimensional silica glass has offered a realistic description of the random network theory of a silica glass structure, initially discussed by Zachariasen.

Grain Boundary Structures and Collective Dynamics of Inversion Domains in Binary Two-Dimensional Materials

Understanding and controlling the properties and dynamics of topological defects is a lasting challenge in the study of two-dimensional materials, and is crucial to achieve high-quality films required for technological applications. Here grain boundary structures, energies, and dynamics of binary two-dimensional materials are investigated through the development of a phase field crystal model that is parametrized to match the ordering, symmetry, energy, and length scales of hexagonal boron nitride. Our studies reveal some new dislocation core structures for various symmetrically and asymmetrically tilted grain boundaries, in addition to those obtained in previous experiments and first-principles calculations. We also identify a defect-mediated growth dynamics for inversion domains governed by the collective atomic migration and defect core transformation at grain boundaries and junctions, a process that is related to inversion symmetry breaking in binary lattice.

Assessing the amorphousness and periodicity of common domain boundaries in silica bilayers on Ru(0 0 0 1)

Domain boundaries are hypothesized to play a role in the crystalline to amorphous transition. Here we examine domain boundary structures in comparison to crystalline and amorphous structures in bilayer silica grown on Ru(0 0 0 1). Atomically resolved scanning probe microscopy data of boundaries in crystalline bilayer films are analyzed to determine structural motifs. A rich variety of boundary structures including rotational, closed-loop, antiphase, and complex boundaries are identified. Repeating units with ring sizes of 558 and 57 form the two most common domain boundary types. Quantitative metrics are utilized to assess the structural composition and degree of order for the chemically equivalent crystalline, domain boundary, and amorphous structures. It is found that domain boundaries in the crystalline phase show similarities to the amorphous phase in their ring statistics and, in some cases, in terms of the observed ring neighborhoods. However, by assessing order and periodicity, domain boundaries are shown to be distinct from the glassy state. The role of the Ru(0 0 0 1) substrate in influencing grain boundary structure is also discussed.

Growth of two dimensional silica and aluminosilicate bilayers on Pd(111): from incommensurate to commensurate crystalline

2D silicate lattice strain energy was significantly reduced by Al-doping resulting in a structural transition from incommensurate to commensurate crystalline.

Vibrational Properties of a Two-Dimensional Silica Kagome Lattice

Kagome lattices are structures possessing fascinating magnetic and vibrational properties, but in spite of a large body of theoretical work, experimental realizations and investigations of their dynamics are scarce. Using a combination of Raman spectroscopy and density functional theory calculations, we study the vibrational properties of two-dimensional silica (2D-SiO2), which has a kagome lattice structure. We identify the signatures of crystalline and amorphous 2D-SiO2 structures in Raman spectra and show that, at finite temperatures, the stability of 2D-SiO2 lattice is strongly influenced by phonon-phonon interaction. Our results not only provide insights into the vibrational properties of 2D-SiO2 and kagome lattices in general but also suggest a quick nondestructive method to detect 2D-SiO2.

Stability and geometry of silica nano-ribbons (SNRs): a first-principles study

Silica based materials are attractive because of their versatility and their unique structures and properties, which have led to numerous applications of silica in a range of fields. Recently, various low-dimensional silica materials have been synthesized experimentally. Here we present a first-principles study on the geometry and stability of novel low-dimensional silica nano-ribbons (SNRs) using density-functional theory (DFT) with van der Waals interactions (optB88-vdW). SNRs of various widths with different surface groups, and with the geometry of hexagonal rings and squares, were taken into consideration. An atomically flat ribbon with mixing squares and rings is also included. The calculations showed high stability for the single layer and bilayer silica ribbons, both containing hexagonal rings. The calculations also revealed a high flexibility of silica chains. The local structure and chemical bonding were carefully analyzed. Electronic band structure calculations showed an insulating nature of the SNRs with energy gaps of about 5.0 to 6.0 eV, which are determined by nonbonding and anti-bonding O 2p states.

Thermal exfoliation of stoichiometric single-layer silica from the stishovite phase: insight from first-principles calculations

Mechanical cleavage, chemical intercalation and chemical vapor deposition are the main methods that are currently used to synthesize nanosheets or monolayers. Here, we propose a new strategy, thermal exfoliation for the fabrication of silica monolayers. Using a variety of state-of-the-art theoretical calculations we show that a stoichiometric single-layer silica with a tetragonal lattice, T-silica, can be thermally exfoliated from the stishovite phase in a clean environment at room temperature. The resulting single-layer silica is dynamically, thermally, and mechanically stable with exceptional properties, including a large band gap of 7.2 eV, an unusual negative Poisson's ratio, a giant Stark effect, and a high breakdown voltage. Moreover, other analogous structures like single-layer GeO2 can also be obtained by thermal exfoliation of its bulk phase. Our findings are expected to motivate experimental efforts on developing new techniques for the synthesis of monolayer materials.

Structure of Periodic Crystals and Quasicrystals in Ultrathin Films of Ba-Ti-O

We model the remarkable thin-film Ba-Ti-O structures formed by heat treatment of an initial perovskite BaTiO₃ thin film on a Pt(111) surface. All structures contain a rumpled Ti-O network with all Ti threefold coordinated with O, and with Ba occupying the larger. mainly Ti₇O₇, pores. The quasicrystal structue is a simple decoration of three types of tiles: square, triangle and 30° rhombus, with edge lengths 6.85 Å, joined edge-to-edge in a quasicrystalline pattern; observed periodic crystals in ultrathin film Ba-Ti-O are built from these and other tiles. Simulated STM images reproduce the patterns seen experimentally, and identify the bright protrusions as Ba atoms. The models are consistent with all experimental observations.

Possibilities and limitations of advanced transmission electron microscopy for carbon-based nanomaterials

A major revolution for electron microscopy in the past decade is the introduction of aberration correction, which enables one to increase both the spatial resolution and the energy resolution to the optical limit. Aberration correction has contributed significantly to the imaging at low operating voltages. This is crucial for carbon-based nanomaterials which are sensitive to electron irradiation. The research of carbon nanomaterials and nanohybrids, in particular the fundamental understanding of defects and interfaces, can now be carried out in unprecedented detail by aberration-corrected transmission electron microscopy (AC-TEM). This review discusses new possibilities and limits of AC-TEM at low voltage, including the structural imaging at atomic resolution, in three dimensions and spectroscopic investigation of chemistry and bonding. In situ TEM of carbon-based nanomaterials is discussed and illustrated through recent reports with particular emphasis on the underlying physics of interactions between electrons and carbon atoms.

Low voltage transmission electron microscopy of graphene

The initial isolation of graphene in 2004 spawned massive interest in this two-dimensional pure sp(2) carbon structure due to its incredible electrical, optical, mechanical, and thermal effects. This in turn led to the rapid development of various characterization tools for graphene. Examples include Raman spectroscopy and scanning tunneling microscopy. However, the one tool with the greatest prowess for characterizing and studying graphene is the transmission electron microscope. State-of-the-art (scanning) transmission electron microscopes enable one to image graphene with atomic resolution, and also to conduct various other characterizations simultaneously. The advent of aberration correctors was timely in that it allowed transmission electron microscopes to operate with reduced acceleration voltages, so that damage to graphene is avoided while still providing atomic resolution. In this comprehensive review, a brief introduction is provided to the technical aspects of transmission electron microscopes relevant to graphene. The reader is then introduced to different specimen preparation techniques for graphene. The different characterization approaches in both transmission electron microscopy and scanning transmission electron microscopy are then discussed, along with the different aspects of electron diffraction and electron energy loss spectroscopy. The use of graphene for other electron microscopy approaches such as in-situ investigations is also presented.

Implantation and atomic-scale investigation of self-interstitials in graphene

Crystallographic defects play a key role in determining the properties of crystalline materials. The new class of two-dimensional materials, foremost graphene, have enabled atomically resolved studies of defects, such as vacancies,1-4 grain boundaries,(5-7) dislocations,(8,9) and foreign atom substitutions.(10-14) However, atomic resolution imaging of implanted self-interstitials has so far been reported neither in any three-dimensional nor in any two-dimensional material. Here, we deposit extra carbon into single-layer graphene at soft landing energies of ∼ 1 eV using a standard carbon coater. We identify all the self-interstitial dimer structures theoretically predicted earlier,(15-17) employing 80 kV aberration-corrected high-resolution transmission electron microscopy. We demonstrate accumulation of the interstitials into larger aggregates and dislocation dipoles, which we predict to have strong local curvature by atomistic modeling, and to be energetically favorable configurations as compared to isolated interstitial dimers. Our results contribute to the basic knowledge on crystallographic defects and lay out a pathway into engineering the properties of graphene by pushing the crystal into a state of metastable supersaturation.

Polycrystalline graphene and other two-dimensional materials

Graphene, a single atomic layer of graphitic carbon, has attracted intense attention because of its extraordinary properties that make it a suitable material for a wide range of technological applications. Large-area graphene films, which are necessary for industrial applications, are typically polycrystalline - that is, composed of single-crystalline grains of varying orientation joined by grain boundaries. Here, we present a review of the large body of research reported in the past few years on polycrystalline graphene. We discuss its growth and formation, the microscopic structure of grain boundaries and their relations to other types of topological defect such as dislocations. The Review further covers electronic transport, optical and mechanical properties pertaining to the characterizations of grain boundaries, and applications of polycrystalline graphene. We also discuss research, still in its infancy, performed on other two-dimensional materials such as transition metal dichalcogenides, and offer perspectives for future directions of research.

Stable single-layer honeycomblike structure of silica

Silica or SiO(2), the main constituent of Earth's rocks has several 3D complex crystalline and amorphous phases, but it does not have a graphitelike layered structure in 3D. Our theoretical analysis and numerical calculations from the first principles predict a single-layer honeycomblike allotrope, hα silica, which can be viewed to be derived from the oxidation of silicene and it has intriguing atomic structure with reentrant bond angles in hexagons. It is a wide band gap semiconductor, which attains remarkable electromechanical properties showing geometrical changes under an external electric field. In particular, it is an auxetic metamaterial with a negative Poisson's ratio and has a high piezoelectric coefficient. While it can form stable bilayer and multilayer structures, its nanoribbons can show metallic or semiconducting behavior depending on their chirality. Coverage of dangling Si orbitals by foreign adatoms can attribute new functionalities to hα silica. In particular, Si(2)O(5), where Si atoms are saturated by oxygen atoms from top and bottom sides alternatingly can undergo a structural transformation to make silicatene, another stable, single layer structure of silica.