Flexible Superhydrophobic and Superoleophilic MoS2 Sponge for Highly Efficient Oil-Water Separation

Janus Textile: Advancing Wearable Technology for Autonomous Sweat Management and Beyond

To alleviate the discomfort caused by excessive sweating, there is a growing emphasis on developing wearable textiles that can evacuate sweat autonomously. These advanced fabrics, unlike their absorbent and retention-prone predecessors, harness the Janus structure-distinguished by its asymmetric wettability-to facilitate one-way transport of liquid. This unique characteristic has significant potential in addressing issues related to excessive bodily moisture and propelling the realm of smart wearables. This review offers a comprehensive overview of the advancements in Janus-structured textiles within the wearable field, delving into the mechanisms behind their unidirectional liquid transport, which rely on chemical gradient and curvature gradient strategies, alongside the methodologies for achieving asymmetric wettability. It further spotlights the multifaceted applications of Janus-based textiles in wearables, including moisture and thermal management, wound care, and sweat analysis. In addition to examining existing hurdles, the review also explores avenues for future innovation, envisioning a new era of Janus textiles tailored for personalized comfort and health monitoring capabilities.

Inside-out templating: A strategy to decorate helical carbon nanotubes and 2D MoS2 on ethyl cellulose sponge for enhanced oil adsorption and oil/water separation

Ethyl cellulose (EC)-based composite sponges were developed for oil spillage treatment. The EC sponge surface was decorated with helical carbon nanotubes (HCNTs) and molybdenum disulfide (MoS2) (1 phr) using the inside-out sugar templating method. The inside surface of a sugar cube was coated with HCNTs and MoS2. After filling the sugar cube pores with EC and the subsequent sugar leaching, the decorating materials presented on the sponge surface. The EC/HCNT/MoS2 sponge had a high level of oil removal based on its adsorption capacity (41.68 g/g), cycled adsorption (∼75-79 %), separation flux efficiency (∼85-95 %), and efficiency in oil/water emulsion separation (92-94 %). The sponge maintained adsorption capacity in acidic, basic, and salty conditions, adsorbed oil under water, and functioned as an oil/water separator in a continuous pump-assisted system. The compressive stress and Young's modulus of the EC sponge increased following its decoration using HCNTs and MoS2. The composite sponge was robust based on cycled compression and was thermally stable up to ∼120 οC. Based on the eco-friendliness of EC, the low loading of HCNTs and MoS2, and sponge versatility, the developed EC/HCNT/MoS2 sponge should be good candidate for use in sustainable oil adsorption and separation applications.

Degradation of sulfamethoxazole by super-hydrophilic MoS2 sponge co-catalytic Fenton: Enhancing Fe2+/Fe3+ cycle and mass transfer

To promote the cycle of Fe2+/Fe3+ in co-catalytic Fenton and enhance mass transfer in an external circulation sequencing batch packed bed reactor (ECSPBR), super-hydrophilicity MoS2 sponge (TMS) modified by tungstosilicic acid (TA) was prepared for efficiently degrading sulfamethoxazole (SMX) antibiotics in aqueous solution. The influence of hydrophilicity of co-catalyst on co-catalytic Fenton and the advantages of ECSPBR were systematically studied through comparative research methods. The results showed that the super hydrophilicity increased the contact between Fe2+ and Fe3+ with TMS, then accelerated Fe2+/Fe3+ cycle. The max Fe2+/Fe3+ ratio of TMS co-catalytic Fenton (TMS/Fe2+/H2O2) was 1.7 times that of hydrophobic MoS2 sponge (CMS) co-catalytic Fenton. SMX degradation efficiency could reach over 90% under suitable conditions. The structure of TMS remained unchanged during the process, and the max dissolved concentration of Mo was lower than 0.06 mg/L. Additionally, the catalytic activity of TMS could be restored by a simple re-impregnation. The external circulation of the reactor was conducive to improving the mass transfer and the utilization rate of Fe2+ and H2O2 during the process. This study offered new insights to prepare a recyclable and hydrophilic co-catalyst and develop an efficient co-catalytic Fenton reactor for organic wastewater treatment.

Ultra-fast uranium capture via the synergistic interaction of the intrinsic sulfur atoms and the phosphoric acid groups adhered to edge sulfur of MoS2

In order to deal with the sudden nuclear leakage event to suppress the spread of radioactive contaminants in a short period of time, it is extremely urgent needed to explore an adsorbent that could be capable of in-situ remedial actions to rapidly capture the leaked radionuclides in split second. An adsorbent was developed that MoS₂ via ultrasonic to expose more surface defects afterwards functionalized by phosphoric acid resulting in more active sites being endowed on the edge S atoms of Mo-vacancy defects, while simultaneously increased the hydrophilicity and interlayer spacing. Hence, an overwhelming fast adsorption rates (adsorption equilibrium within 30 s) are presented and place the MoS₂-PO₄ at the top of performing sorbent materials. Moreover, the maximum capacity calculated from Langmuir model is as high as 354.61 mg·g^-1, the selective adsorption capacity (S_U) achieving 71.2% in the multi-ion system and with more than 91% capacity retention after 5 cycles of recycling. Finally, XPS and DFT insight into the adsorption mechanism, which can be explained as interaction of UO₂²⁺ on the surface of MoS₂-PO₄ by forming U-O and U-S bonds. The successful fabrication of such a material may provide a promising solution for emergency treatment of radioactive wastewater during nuclear leakage events.

Prospective applications of two-dimensional materials beyond laboratory frontiers: A review

The development of nanotechnology has been advancing for decades and gained acceleration in the 21st century. Two-dimensional (2D) materials are widely available, giving them a wide range of material platforms for technological study and the advancement of atomic-level applications. The design and application of 2D materials are discussed in this review. In order to evaluate the performance of 2D materials, which might lead to greater applications benefiting the electrical and electronics sectors as well as society, the future paradigm of 2D materials needs to be visualized. The development of 2D hybrid materials with better characteristics that will help industry and society at large is anticipated to result from intensive research in 2D materials. This enhanced evaluation might open new opportunities for the synthesis of 2D materials and the creation of devices that are more effective than traditional ones in various sectors of application.

Preparation of 2D Materials and Their Application in Oil-Water Separation

The problems of environmental pollution are increasingly severe. Among them, industrial wastewater is one of the primary sources of pollution, so it is essential to deal with wastewater, especially oil and water mixtures. At present, biomimetic materials with special wettability have been proven to be effective in oil-water separation. Compared with three-dimensional (3D) materials, two-dimensional (2D) materials show unique advantages in the preparation of special wettable materials due to their high specific surface area, high porosity, controlled structure, and rich functional group rich on the surface. In this review, we first introduce oil-water mixtures and the common oil-water separation mechanism. Then, the research progress of 2D materials in oil-water separation is presented, including but not limited to their structure, types, preparation principles, and methods. In addition, it is still impossible to prepare 2D materials with large sizes because they are powder-like, which greatly limits the application in oil-water separation. Therefore, we provide here a review of several ways to transform 2D materials into 3D materials. In the end, the challenges encountered by 2D materials in separating oil-water are also clarified to promote future applications.

Production of an EP/PDMS/SA/AlZnO Coated Superhydrophobic Surface through an Aerosol-Assisted Chemical Vapor Deposition Process

In this study, a superhydrophobic coating on glass has been prepared through a single-step aerosol-assisted chemical vapor deposition (AACVD) process. During the process, an aerosolized precursor containing polydimethylsiloxane, epoxy resin, and stearic acid functionalized Al-doped ZnO nanoparticles was deposited onto the glass at 350 °C. X-ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy showed that the precursor was successfully coated and formed a nano/microstructure (surface roughness: 378.0 ± 46.1 nm) on the glass surface. The coated surface had a water contact angle of 159.1 ± 1.2°, contact angle hysteresis of 2.2 ± 1.7°, and rolling off-angle of 1°, indicating that it was superhydrophobic. In the self-cleaning test of the coated surface at a tilted angle of 20°, it was shown that water droplets rolled and washed out dirt on the surface. The stability tests showed that the surface remained superhydrophobic after 120 h of exposure to ultraviolet (UV) irradiation and even after heat exposure at 350 °C. In addition, the surface was highly repellent to water solutions of pH 1-13. The results showed that the addition of the functionalized nanoparticles into the precursor allowed for the control of surface roughness and provided a simplified single-step fabrication process of the superhydrophobic surface. This provides valuable information for developing the manufacturing process for superhydrophobic surfaces.

Hydrophobic Porous Polypropylene with Hierarchical Structures for Ultrafast and Highly Selective Oil/Water Separation

Recently, various porous absorbents have been developed and the in situ vacuum/pump-assisted continuous separation process has proven to be the most efficient technique to utilize those absorbents for oil spill cleanup. However, to achieve a high oil removal throughput, a high pumping pressure and/or large absorbent pore sizes are required, which would compromise the selectivity of oil/water separation, as water may penetrate the absorbent beyond a critical external pressure. In this work, this challenge has been circumvented by employing hierarchically porous polypropylene (PP) with controlled pore sizes generated from a tricontinuous heterophase polymer blend system. As compared to unimodal pores, the incorporation of the secondary smaller pores significantly enhances the oil removal throughput by up to 4-5 times without the necessity of raising the pumping pressure or increasing the diameter of the primary pores, which in turn, prevents compromising the oil/water separation selectivity.

A Review on MoS2 Properties, Synthesis, Sensing Applications and Challenges

Molybdenum disulfide (MoS2) is one of the compounds discussed nowadays due to its outstanding properties that allowed its usage in different applications. Its band gap and its distinctive structure make it a promising material to substitute graphene and other semiconductor devices. It has different applications in electronics especially sensors like optical sensors, biosensors, electrochemical biosensors that play an important role in the detection of various diseases’ like cancer and Alzheimer. It has a wide range of energy applications in batteries, solar cells, microwave, and Terahertz applications. It is a promising material on a nanoscale level, with favorable characteristics in spintronics and magnetoresistance. In this review, we will discuss MoS2 properties, structure and synthesis techniques with a focus on its applications and future challenges.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

A multifunctional sponge incorporated with TiO2 and graphene oxide as a reusable absorbent for oil/water separation and dye absorption

Reusable TiO₂–GO–SA sponges can be used for the oil/water separation and absorption of oils and dyes.

Assembly of Ultralight Dual Network Graphene Aerogel with Applications for Selective Oil Absorption

High-performance graphene aerogels with well-developed internal structures are generally obtained by means of introducing additive materials such as carbon nanotubes, cellulose, and lignin into the aerogel network, which not only enhances the cost but also complicates the preparation process. Therefore, tailoring the internal structure of pristine graphene aerogel in a feasible way to achieve high performance is of great significance to the practical applications. Herein, a novel cysteamine/l-ascorbic acid graphene aerogel (CLGA) was fabricated by a simple one-step hydrothermal method followed by freeze-drying. Through the creative combination of the reducing agent l-ascorbic acid and cross-linking agent cysteamine, a dual-network structure was constructed by both layered physical stacking and vertical chemical cross-linking. The addition of cysteamine not only enhanced the reduction degree but also assisted the formation of more vertical connections between graphene nanosheets, resulting in more abundant pores with smaller sizes compared with graphene aerogels prepared by the traditional hydrothermal reduction method. CLGA possessed an ultra-low density of 4.2 mg/cm³ and a high specific surface area of 397.9 m²/g. As expected, this dual-network structure effectively improved the absorption capacity toward a variety of oil and organic solvents, with an outstanding oil absorption capacity up to 310 g/g. Furthermore, CLGA possessed good mechanical properties and oil/water selectivity. The absorbed oil could be recovered by both continuous absorption-removal process and mechanical squeezing, making the as-prepared aerogel superior absorbent material for a variety of applications, such as selective oil absorption and water treatment.

One-Step Thermochemical Conversion of Biomass Waste into Superhydrophobic Carbon Material by Catalytic Pyrolysis

Preparation of superhydrophobic carbon materials from lignocellulosic biomass waste via one-step carbonization is very difficult due to the existences of polar functional groups and ashes, which are extremely hydrophilic. Herein, superhydrophobic carbon materials can be facilely synthesized by catalytic pyrolysis of biomass waste using FeCl3 as catalyst. The results show that the surface energy of lignin-derived char (CharL) is significantly reduced to 19.25 mN m-1 from 73.29 mN m-1, and the water contact angle increased from 0 to 151.5°, by interaction with FeCl3. Multiple characterizations and control experiments demonstrate that FeCl3 can catalyze the pyrolytic volatiles to form a rough graphite and diamond-like carbon layer that isolates the polar functional groups and ashes on CharL, contributing to the superhydrophobicity of the CharL. The one-step catalytic pyrolysis is able to convert different natural biomass waste (e.g., lignin, cellulose, sawdust, rice husk, maize straw, and pomelo peel) into superhydrophobic carbon materials. This study contributes new information related to the interfacial chemistry during the sustainable utilization of biomass waste.

Carbon Microtube Aerogel Derived from Kapok Fiber: An Efficient and Recyclable Sorbent for Oils and Organic Solvents

A carbon microtube aerogel (CMA) with hydrophobicity, strong adsorption capacity, and superb recyclability was obtained by a feasible approach with economical raw material, such as kapok fiber. The CMA possesses a great adsorption capacity of 78-348 times its weight. Attributed to its outstanding thermal stability and excellent mechanical properties, the CMA can be used for many cycles of distillation, squeezing, and combustion without degradation, which suggests a potential practical application in oil-water separation. In addition, the adsorption capacity still retained 98% by distillation, 97% by squeezing, and 90% by combustion after 10 cycles. Therefore, the obtained CMA has a broad prospect as an economical, efficient, and environmentally friendly adsorbent.

Effect of Nano-SnS and Nano-MoS2 on the Corrosion Protection Performance of the Polyvinylbutyral and Zinc-Rich Polyvinylbutyral Coatings

In this paper, four composite coatings of nano-SnS/polyvinylbutyral (PVB), nano-MoS2/PVB, nano-SnS-Zn/PVB, and nano-MoS2-Zn/PVB were prepared, and their anti-corrosion mechanism was analyzed by experimental and theoretical calculations. The results of the electrochemical experiments show that the effect of nano-MoS2 on the corrosion protection performance of PVB coating is better than that of nano-SnS in 3% NaCl solution, and that the addition of Zn further enhances this effect, which is consistent with the results of weight loss measurements. Furthermore, the observation of the corrosion matrix by the field emission scanning electron microscope (FESEM) further confirmed the above conclusion. At last, the molecular dynamics (MD) simulation were carried out to investigate the anti-corrosion mechanism of the nanofillers/PVB composites for the copper surface. The results show that both nano-SnS and nano-MoS2 are adsorbed strongly on the copper surface, and the binding energy of nano-MoS2 is larger than that of nano-SnS.

Polydimethylsiloxane/Nanodiamond Composite Sponge for Enhanced Mechanical or Wettability Performance

Polydimethylsiloxane (PDMS) is widely utilized in material science, chemical engineering, and environmental science due to its excellent properties. By utilizing fillers, so-called composite materials can be obtained with enhanced mechanical, wettability, or thermal conductivity performance. Here, we present a simple, cost-effective approach to vary either the mechanical properties (Young's modulus) or surface wettability of bulk PDMS and PDMS sponges simply by adding nanodiamond filler with different surface terminations, either oxidized (oND) or hydrogenated (reduced, rND) nanodiamond. Minuscule amounts of oxidized nanodiamond particles as filler showed to benefit the compressive Young's modulus of composite sponges with up to a 52% increase in its value, while the wettability of composite sponges was unaffected. In contrast, adding reduced nanodiamond particles to PDMS yielded inclined water contact angles on the PDMS/nanodiamond composite sponges. Finally, we show that the PDMS/rND composites are readily utilized as an absorbent for oil/water separation problems. This signifies that the surface termination of the ND particle has a crucial effect on the performance of the composite.

Enhancing the Robustness of Superhydrophobic Coatings via the Addition of Sulfide

Micro/nano hierarchical structures with special wettability impart a wide spectrum of unique properties to the superhydrophobic surfaces that are applicable in different potential fields. Therefore, it is necessary to develop advanced superhydrophobic materials with excellent wear-resistance properties. In this study, PDMS-based robust superhydrophobic coatings, which used MoS₂ or WS₂ as a solid lubricant, PDMS as a binder, and SiO₂ as a filler, were prepared on glass substrate by the one-step air spaying method. Lamellar MoS₂ and WS₂ with high crystallinity had intrinsic hydrophobic properties. The MoS₂@SiO₂-PDMS (MSP) and WS₂@SiO₂-PDMS (WSP) coatings with very rough textures showed good water-repellent behavior with water contact angles of 167.8 and 166.2°, respectively. The results demonstrated that the addition of microsized MoS₂ or WS₂ could easily format micro/nano second-level hierarchical structures, thus realizing the superhydrophobic properties. The friction coefficient decreased gradually with the increasing in MoS₂ or WS₂. A 4:1 ratio of SiO₂ to MoS₂/WS₂ could cause the samples to preserve their superhydrophobic properties even after 100 cycles on the abraser. As a result, superhydrophobic coatings with excellent wear resistance will be good candidates for water-repellent surfaces to meet practical emerging needs in industry applications.

Reaction Kinetics for the Covalent Functionalization of Two-Dimensional MoS2 by Aryl Diazonium Salts

The two-dimensional transition-metal dichalcogenide molybdenum disulfide (MoS₂) has been intensely studied in the past several years due to its exceptional electronic, optical, and chemical properties in a wide range of applications. The chemical functionalization of MoS₂ allows its properties and interfacial interactions to be tuned and controlled. Recently, we reported the direct covalent functionalization of semiconducting MoS₂ with aryl diazonium salts, without the use of harsh initial treatments or phase engineering. In this paper, we confirm and expand the covalent functionalization reaction model by performing a detailed study of the reaction kinetics for monolayer MoS₂ functionalized by 4-nitrobenzene tetrafluoroborate (4-NBD). We find that both the Freundlich and Temkin isotherm models are good descriptors of the reaction due to the energetically inhomogeneous surface of MoS₂ and the indirect adsorbate-adsorbate interactions from previously attached nitrophenyl groups, respectively. The reaction kinetics was then found to be well described using a pseudo-second-order model, showing that the order of this reaction is two. This study supports our previous work and gives us a deeper understanding of the nature of the covalent functionalization of MoS₂.

Novel Superhydrophobic Sand and Polyurethane Sponge Coated with Silica/Modified Asphaltene Nanoparticles for Rapid Oil Spill Cleanup

Superhydrophobic nanomaterials are promising in the important pursuit to alleviate the environmental pollution caused by the petroleum crude oil industry, especially to clean-up oil spills. In this work, asphaltenes isolated from crude oil were modified to act as capping agents during the synthesis of hydrophobic silica nanoparticles (HSNPs). The chemical structure, surface morphology, particle size, and surfaces charge of HSNPs were investigated. The contact angles of water droplets on HSNP film surfaces were measured to investigate their wetting properties. Finally, superhydrophobic sand and polyurethane sponge were prepared by coating them with HSNPs and applied in the cleanup of oil spills of viscous heavy Arabian crude oil.

Superhydrophobic WS2-Nanosheet-Wrapped Sponges for Underwater Detection of Tiny Vibration

Underwater vibration detection is of great importance in personal safety, environmental protection, and military defense. Sealing layers are required in many underwater sensor architectures, leading to limited working-life and reduced sensitivity. Here, a flexible, superhydrophobic, and conductive tungsten disulfide (WS2) nanosheets-wrapped sponge (SCWS) is reported for the high-sensitivity detection of tiny vibration from the water surfaces and from the grounds. When the SCWS is immersed in water, a continuous layer of bubbles forms on its surfaces, providing the sensor with two special abilities. One is sealing-free feature due to the intrinsic water-repellent property of SCWS. The other is functioning as a vibration-sensitive medium to convert mechanical energy into electric signals through susceptible physical deformation of bubbles. Therefore, the SCWS can be used to precisely detect tiny vibration of water waves, and even sense those caused by human footsteps, demonstrating wide applications of this amphibious (water/ground) vibration sensor. Results of this study can initiate the exploration of superhydrophobic materials with elastic and conductive properties for underwater flexible electronic applications.

Environmental Applications of 2D Molybdenum Disulfide (MoS2) Nanosheets

In an era of graphene-based nanomaterials as the most widely studied two-dimensional (2D) materials for enhanced performance of devices and systems in numerous environmental applications, molybdenum disulfide (MoS₂) nanosheets stand out as a promising alternative 2D material with many excellent physicochemical, biological, and mechanical properties that differ significantly from those of graphene-based nanomaterials, potentially leading to new environmental phenomena and novel applications. This Critical Review presents the latest advances in the use of MoS₂ nanosheets for important water-related environmental applications such as contaminant adsorption, photocatalysis, membrane-based separation, sensing, and disinfection. Various methods for MoS₂ nanosheet synthesis are examined, and their suitability for different environmental applications is discussed. The unique structure and properties of MoS₂ nanosheets enabling exceptional environmental capabilities are compared with those of graphene-based nanomaterials. The environmental implications of MoS₂ nanosheets are emphasized, and research needs for future environmental applications of MoS₂ nanosheets are identified.

Janus Graphene Oxide Sponges for High-Purity Fast Separation of Both Water-in-Oil and Oil-in-Water Emulsions

Membrane separation of oil and water with high purity and high permeability is of great interest in environmental and industrial processes. However, membranes with fixed wettability can separate only one type of surfactant-stabilized emulsion (water-in-oil or oil-in-water). Here, we report on Janus graphene oxide (J-GO) sponges for high purity and high permeability separation of both water-in-oil and oil-in-water emulsions. Millimeter-scale reduced GO sponges with a controlled pore size (11.2 or 94.1 μm) are synthesized by freeze drying, and the wettability is further controlled by fluorine (hydrophobic/oleophilic in air) or oxygen (hydrophilic/oleophilic in air) functionalization. J-GO sponges are prepared by the fluorine functionalization on one side and oxygen functionalization on the other side. Interestingly, the oil wettability of oxygen-functionalized surface turns into an oleophobic surface when immersed in water, which is explained by Young's theory. This effect is further used in the separation of both water-in-oil and oil-in-water emulsions by changing the flow direction. The purity of the separated oil and water is very high (≥99.2%), and the permeability is more than an order of magnitude greater than those of the other Janus membranes reported. J-GO sponges can be reused with an excellent repeatability, demonstrating feasibility in practical applications.

Superhydrophobic hBN-Regulated Sponges with Excellent Absorbency Fabricated Using a Green and Facile Method

The world faces severe environmental, human and ecological problems when major oil spills and organic discharges are released into the environment. And so it is imperative to develop tools and high performance innovative materials that can efficiently absorb these organic discharges. Furthermore, green, facile methods to produce these advanced materials are also needed. In this paper, we demonstrate a novel porous supersponge based on melamine coated with hBN. This superhydrophobic sponge (with a contact angle >150°) exhibits excellent absorption performance for oils and organic solvents, including good selectivity, high capacity (up to 175 g·g⁻¹) and extraordinary recyclability (less than 20% decline after 30 cycles of absorption/squeezing). The synthetic procedure required only ultrasonication and immersion of the sponge in aqueous hBN solution, being a green, cost-effective and scalable production methodology. By virtue of the straightforward and cost-effective fabrication method, along with the excellent absorption performance, hBN-decorated sponges have great promise for real world practical application in the field of oil spills and organic leakage cleanup.