Computational design of an epitope-specific Keap1 binding antibody using hotspot residues grafting and CDR loop swapping

Using Short Molecular Dynamics Simulations to Determine the Important Features of Interactions in Antibody-Protein Complexes

The last few years have seen the rapid proliferation of machine learning methods to design binding proteins. Although these methods have shown large increases in experimental success rates compared to prior approaches, the majority of their predictions fail when they are experimentally tested. It is evident that computational methods still struggle to distinguish the features of real protein binding interfaces from false predictions. Short molecular dynamics simulations of 20 antibody-protein complexes were conducted to identify features of interactions that should occur in binding interfaces. Intermolecular salt bridges, hydrogen bonds, and hydrophobic interactions were evaluated for their persistences, energies, and stabilities during the simulations. It was found that only the hydrogen bonds where both residues are stabilized in the bound complex are expected to persist and meaningfully contribute to binding between the proteins. In contrast, stabilization was not a requirement for salt bridges and hydrophobic interactions to persist. Still, interactions where both residues are stabilized in the bound complex persist significantly longer and have significantly stronger energies than other interactions. Two hundred and twenty real antibody-protein complexes and 8194 decoy complexes were used to train and test a random forest classifier using the features of expected persistent interactions identified in this study and the macromolecular features of interaction energy (IE), buried surface area (BSA), IE/BSA, and shape complementarity. It was compared to a classifier trained only on the expected persistent interaction features and another trained only on the macromolecular features. Inclusion of the expected persistent interaction features reduced the false positive rate of the classifier by two- to five-fold across a range of true positive classification rates.

Atomically accurate de novo design of antibodies with RFdiffusion

Despite the central role that antibodies play in modern medicine, there is currently no method to design novel antibodies that bind a specific epitope entirely in silico. Instead, antibody discovery currently relies on animal immunization or random library screening approaches. Here, we demonstrate that combining computational protein design using a fine-tuned RFdiffusion network alongside yeast display screening enables the generation of antibody variable heavy chains (VHHs) and single chain variable fragments (scFvs) that bind user-specified epitopes with atomic-level precision. To verify this, we experimentally characterized VHH binders to four disease-relevant epitopes using multiple orthogonal biophysical methods, including cryo-EM, which confirmed the proper Ig fold and binding pose of designed VHHs targeting influenza hemagglutinin and Clostridium difficile toxin B (TcdB). For the influenza-targeting VHH, high-resolution structural data further confirmed the accuracy of CDR loop conformations. While initial computational designs exhibit modest affinity, affinity maturation using OrthoRep enables production of single-digit nanomolar binders that maintain the intended epitope selectivity. We further demonstrate the de novo design of single-chain variable fragments (scFvs), creating binders to TcdB and a Phox2b peptide-MHC complex by combining designed heavy and light chain CDRs. Cryo-EM structural data confirmed the proper Ig fold and binding pose for two distinct TcdB scFvs, with high-resolution data for one design additionally verifying the atomically accurate conformations of all six CDR loops. Our approach establishes a framework for the rational computational design, screening, isolation, and characterization of fully de novo antibodies with atomic-level precision in both structure and epitope targeting.

Revolutionizing Synthetic Antibody Design: Harnessing Artificial Intelligence and Deep Sequencing Big Data for Unprecedented Advances

Synthetic antibodies (Abs) represent a category of engineered proteins meticulously crafted to replicate the functions of their natural counterparts. Such Abs are generated in vitro, enabling advanced molecular alterations associated with antigen recognition, paratope site engineering, and biochemical refinements. In a parallel realm, deep sequencing has brought about a paradigm shift in molecular biology. It facilitates the prompt and cost-effective high-throughput sequencing of DNA and RNA molecules, enabling the comprehensive big data analysis of Ab transcriptomes, including specific regions of interest. Significantly, the integration of artificial intelligence (AI), based on machine- and deep- learning approaches, has fundamentally transformed our capacity to discern patterns hidden within deep sequencing big data, including distinctive Ab features and protein folding free energy landscapes. Ultimately, current AI advances can generate approximations of the most stable Ab structural configurations, enabling the prediction of de novo synthetic Abs. As a result, this manuscript comprehensively examines the latest and relevant literature concerning the intersection of deep sequencing big data and AI methodologies for the design and development of synthetic Abs. Together, these advancements have accelerated the exploration of antibody repertoires, contributing to the refinement of synthetic Ab engineering and optimizations, and facilitating advancements in the lead identification process.

Navigating the landscape: A comprehensive overview of computational approaches in therapeutic antibody design and analysis

Immunotherapy, harnessing components like antibodies, cells, and cytokines, has become a cornerstone in treating diseases such as cancer and autoimmune disorders. Therapeutic antibodies, in particular, have transformed modern medicine, providing a targeted approach that destroys disease-causing cells while sparing healthy tissues, thereby reducing the side effects commonly associated with chemotherapy. Beyond oncology, these antibodies also hold promise in addressing chronic infections where conventional therapeutics may fall short. However, antibodies identified through in vivo or in vitro methods often require extensive engineering to enhance their therapeutic potential. This optimization process, aimed at improving affinity, specificity, and reducing immunogenicity, is both challenging and costly, often involving trade-offs between critical properties. Traditional methods of antibody development, such as hybridoma technology and display techniques, are resource-intensive and time-consuming. In contrast, computational approaches offer a faster, more efficient alternative, enabling the precise design and analysis of therapeutic antibodies. These methods include sequence and structural bioinformatics approaches, next-generation sequencing-based data mining, machine learning algorithms, systems biology, immuno-informatics, and integrative approaches. These approaches are advancing the field by providing new insights and enhancing the accuracy of antibody design and analysis. In conclusion, computational approaches are essential in the development of therapeutic antibodies, significantly improving the precision and speed of discovery, optimization, and validation. Integrating these methods with experimental approaches accelerates therapeutic antibody development, paving the way for innovative strategies and treatments for various diseases ranging from cancers to autoimmune and infectious diseases.

CDRxAbs: antibody small-molecule conjugates with computationally designed target-binding synergy

Bioconjugates as therapeutic modalities combine the advantages and offset the disadvantages of their constituent parts to achieve a refined spectrum of action. We combine the concept of bioconjugation with the full atomic simulation capability of computational protein design to define a new class of molecular recognition agents: CDR-extended antibodies, abbreviated as CDRxAbs. A CDRxAb incorporates a covalently attached small molecule into an antibody/target binding interface using computational protein design to create an antibody small-molecule conjugate that binds tighter to the target of the small molecule than the small molecule would alone. CDRxAbs are also expected to increase the target binding specificity of their associated small molecules. In a proof-of-concept study using monomeric streptavidin/biotin pairs at either a nanomolar or micromolar-level initial affinity, we designed nanobody-biotin conjugates that exhibited >20-fold affinity improvement against their protein targets with step-wise optimization of binding kinetics and overall protein stability. The workflow explored through this process promises a novel approach to optimize small-molecule based therapeutics and to explore new chemical and target space for molecular-recognition agents in general.

Prediction of Paratope-Epitope Pairs Using Convolutional Neural Networks

Antibodies play a central role in the adaptive immune response of vertebrates through the specific recognition of exogenous or endogenous antigens. The rational design of antibodies has a wide range of biotechnological and medical applications, such as in disease diagnosis and treatment. However, there are currently no reliable methods for predicting the antibodies that recognize a specific antigen region (or epitope) and, conversely, epitopes that recognize the binding region of a given antibody (or paratope). To fill this gap, we developed ImaPEp, a machine learning-based tool for predicting the binding probability of paratope-epitope pairs, where the epitope and paratope patches were simplified into interacting two-dimensional patches, which were colored according to the values of selected features, and pixelated. The specific recognition of an epitope image by a paratope image was achieved by using a convolutional neural network-based model, which was trained on a set of two-dimensional paratope-epitope images derived from experimental structures of antibody-antigen complexes. Our method achieves good performances in terms of cross-validation with a balanced accuracy of 0.8. Finally, we showcase examples of application of ImaPep, including extensive screening of large libraries to identify paratope candidates that bind to a selected epitope, and rescoring and refining antibody-antigen docking poses.

"Redirecting an anti-IL-1β antibody to bind a new, unrelated and computationally predicted epitope on hIL-17A"

Antibody engineering technology is at the forefront of therapeutic antibody development. The primary goal for engineering a therapeutic antibody is the generation of an antibody with a desired specificity, affinity, function, and developability profile. Mature antibodies are considered antigen specific, which may preclude their use as a starting point for antibody engineering. Here, we explore the plasticity of mature antibodies by engineering novel specificity and function to a pre-selected antibody template. Using a small, focused library, we engineered AAL160, an anti-IL-1β antibody, to bind the unrelated antigen IL-17A, with the introduction of seven mutations. The final redesigned antibody, 11.003, retains favorable biophysical properties, binds IL-17A with sub-nanomolar affinity, inhibits IL-17A binding to its cognate receptor and is functional in a cell-based assay. The epitope of the engineered antibody can be computationally predicted based on the sequence of the template antibody, as is confirmed by the crystal structure of the 11.003/IL-17A complex. The structures of the 11.003/IL-17A and the AAL160/IL-1β complexes highlight the contribution of germline residues to the paratopes of both the template and re-designed antibody. This case study suggests that the inherent plasticity of antibodies allows for re-engineering of mature antibodies to new targets, while maintaining desirable developability profiles.

How can we discover developable antibody-based biotherapeutics?

Antibody-based biotherapeutics have emerged as a successful class of pharmaceuticals despite significant challenges and risks to their discovery and development. This review discusses the most frequently encountered hurdles in the research and development (R&D) of antibody-based biotherapeutics and proposes a conceptual framework called biopharmaceutical informatics. Our vision advocates for the syncretic use of computation and experimentation at every stage of biologic drug discovery, considering developability (manufacturability, safety, efficacy, and pharmacology) of potential drug candidates from the earliest stages of the drug discovery phase. The computational advances in recent years allow for more precise formulation of disease concepts, rapid identification, and validation of targets suitable for therapeutic intervention and discovery of potential biotherapeutics that can agonize or antagonize them. Furthermore, computational methods for de novo and epitope-specific antibody design are increasingly being developed, opening novel computationally driven opportunities for biologic drug discovery. Here, we review the opportunities and limitations of emerging computational approaches for optimizing antigens to generate robust immune responses, in silico generation of antibody sequences, discovery of potential antibody binders through virtual screening, assessment of hits, identification of lead drug candidates and their affinity maturation, and optimization for developability. The adoption of biopharmaceutical informatics across all aspects of drug discovery and development cycles should help bring affordable and effective biotherapeutics to patients more quickly.

Analysis of conformational stability of interacting residues in protein binding interfaces

After approximately 60 years of work, the protein folding problem has recently seen rapid advancement thanks to the inventions of AlphaFold and RoseTTAFold, which are machine-learning algorithms capable of reliably predicting protein structures from their sequences. A key component in their success was the inclusion of pairwise interaction information between residues. As research focus shifts towards developing algorithms to design and engineer binding proteins, it is likely that knowledge of interaction features at protein interfaces can improve predictions. Here, 574 protein complexes were analyzed to identify the stability features of their pairwise interactions, revealing that interactions between pre-stabilized residues are a selected feature in protein binding interfaces. In a retrospective analysis of 475 de novo designed binding proteins with an experimental success rate of 19%, inclusion of pairwise interaction pre-stabilization parameters increased the frequency of identifying experimentally successful binders to 40%.

Optimizing Antibody Affinity and Developability Using a Framework-CDR Shuffling Approach-Application to an Anti-SARS-CoV-2 Antibody

The computational methods used for engineering antibodies for clinical development have undergone a transformation from three-dimensional structure-guided approaches to artificial-intelligence- and machine-learning-based approaches that leverage the large sequence data space of hundreds of millions of antibodies generated by next-generation sequencing (NGS) studies. Building on the wealth of available sequence data, we implemented a computational shuffling approach to antibody components, using the complementarity-determining region (CDR) and the framework region (FWR) to optimize an antibody for improved affinity and developability. This approach uses a set of rules to suitably combine the CDRs and FWRs derived from naturally occurring antibody sequences to engineer an antibody with high affinity and specificity. To illustrate this approach, we selected a representative SARS-CoV-2-neutralizing antibody, H4, which was identified and isolated previously based on the predominant germlines that were employed in a human host to target the SARS-CoV-2-human ACE2 receptor interaction. Compared to screening vast CDR libraries for affinity enhancements, our approach identified fewer than 100 antibody framework-CDR combinations, from which we screened and selected an antibody (CB79) that showed a reduced dissociation rate and improved affinity against the SARS-CoV-2 spike protein (7-fold) when compared to H4. The improved affinity also translated into improved neutralization (>75-fold improvement) of SARS-CoV-2. Our rapid and robust approach for optimizing antibodies from parts without the need for tedious structure-guided CDR optimization will have broad utility for biotechnological applications.

MutDock: A computational docking approach for fixed-backbone protein scaffold design

Despite the successes of antibodies as therapeutic binding proteins, they still face production and design challenges. Alternative binding scaffolds of smaller size have been developed to overcome these issues. A subset of these alternative scaffolds recognizes target molecules through mutations to a set of surface resides, which does not alter their backbone structures. While the computational design of antibodies for target epitopes has been explored in depth, the same has not been done for alternative scaffolds. The commonly used dock-and-mutate approach for binding proteins, including antibodies, is limited because it uses a constant sequence and structure representation of the scaffold. Docking fixed-backbone scaffolds with a varied group of surface amino acids increases the chances of identifying superior starting poses that can be improved with subsequent mutations. In this work, we have developed MutDock, a novel computational approach that simultaneously docks and mutates fixed backbone scaffolds for binding a target epitope by identifying a minimum number of hydrogen bonds. The approach is broadly divided into two steps. The first step uses pairwise distance alignment of hydrogen bond-forming areas of scaffold residues and compatible epitope atoms. This step considers both native and mutated rotamers of scaffold residues. The second step mutates clashing variable interface residues and thermodynamically unfavorable residues to create additional strong interactions. MutDock was used to dock two scaffolds, namely, Affibodies and DARPins, with ten randomly selected antigens. The energies of the docked poses were minimized and binding energies were compared with docked poses from ZDOCK and HADDOCK. The top MutDock poses consisted of higher and comparable binding energies than the top ZDOCK and HADDOCK poses, respectively. This work contributes to the discovery of novel binders based on smaller-sized, fixed-backbone protein scaffolds.

Understanding and Modulating Antibody Fine Specificity: Lessons from Combinatorial Biology

Combinatorial biology methods such as phage and yeast display, suitable for the generation and screening of huge numbers of protein fragments and mutated variants, have been useful when dissecting the molecular details of the interactions between antibodies and their target antigens (mainly those of protein nature). The relevance of these studies goes far beyond the mere description of binding interfaces, as the information obtained has implications for the understanding of the chemistry of antibody–antigen binding reactions and the biological effects of antibodies. Further modification of the interactions through combinatorial methods to manipulate the key properties of antibodies (affinity and fine specificity) can result in the emergence of novel research tools and optimized therapeutics.

Higher Affinity Antibodies Bind With Lower Hydration and Flexibility in Large Scale Simulations

We have carried out a long-timescale simulation study on crystal structures of nine antibody-antigen pairs, in antigen-bound and antibody-only forms, using molecular dynamics with enhanced sampling and an explicit water model to explore interface conformation and hydration. By combining atomic level simulation and replica exchange to enable full protein flexibility, we find significant numbers of bridging water molecules at the antibody-antigen interface. Additionally, a higher proportion of interactions excluding bulk waters and a lower degree of antigen bound CDR conformational sampling are correlated with higher antibody affinity. The CDR sampling supports enthalpically driven antibody binding, as opposed to entropically driven, in that the difference between antigen bound and unbound conformations do not correlate with affinity. We thus propose that interactions with waters and CDR sampling are aspects of the interface that may moderate antibody-antigen binding, and that explicit hydration and CDR flexibility should be considered to improve antibody affinity prediction and computational design workflows.

Advances in computational structure-based antibody design

Antibodies are currently the most important class of biotherapeutics and are used to treat numerous diseases. Recent advances in computational methods are ushering in a new era of antibody design, driven in part by accurate structure prediction. Previously, structure-based antibody design has been limited to a relatively small number of cases where accurate structures or models of both the target antigen and antibody were available. As we move towards a time where it is possible to accurately model most antibodies and antigens, and to reliably predict their binding site, there is vast potential for true computational antibody design. In this review, we describe the latest methods that promise to launch a paradigm shift towards entirely in silico structure-based antibody design.

Exploring the binding of rationally engineered tandem-repeat proteins to E3 ubiquitin ligase Keap1

The process of displaying functional peptides by 'grafting' them onto loops of a stable protein scaffold can be used to impart binding affinity for a target, but it can be difficult to predict the affinity of the grafted peptide and the effect of grafting on scaffold stability. In this study, we show that a series of peptides that bind to the E3 ubiquitin ligase Keap1 can be grafted into the inter-repeat loop of a consensus-designed tetratricopeptide repeat (CTPR) protein resulting in proteins with high stability. We found that these CTPR-grafted peptides had similar affinities to their free peptide counterparts and achieved a low nanomolar range. This result is likely due to a good structural match between the inter-repeat loop of the CTPR and the Keap1-binding peptide. The grafting process led to the discovery of a new Keap1-binding peptide, Ac-LDPETGELL-NH2, with low nanomolar affinity for Keap1, highlighting the potential of the repeat-protein class for application in peptide display.

Rosetta-Enabled Structural Prediction of Permissive Loop Insertion Sites in Proteins

While loop motifs frequently play a major role in protein function, our understanding of how to rationally engineer proteins with novel loop domains remains limited. In the absence of rational approaches, the incorporation of loop domains often destabilizes proteins, thereby requiring massive screening and selection to identify sites that can accommodate loop insertion. We developed a computational strategy for rapidly scanning the entire structure of a scaffold protein to determine the impact of loop insertion at all possible amino acid positions. This approach is based on the Rosetta kinematic loop modeling protocol and was demonstrated by identifying sites in lipase that were permissive to insertion of the LAP peptide. Interestingly, the identification of permissive sites was dependent on the contribution of the residues in the near-loop environment on the Rosetta score and did not correlate with conventional structural features (e.g., B-factors). As evidence of this, several insertion sites (e.g., following residues 17, 47-49, and 108), which were predicted and confirmed to be permissive, interrupted helices, while others (e.g., following residues 43, 67, 116, 119, and 121), which are situated in loop regions, were nonpermissive. This approach was further shown to be predictive for β-glucosidase and human phosphatase and tensin homologue (PTEN), and to facilitate the engineering of insertion sites through in silico mutagenesis. By enabling the design of loop-containing protein libraries with high probabilities of soluble expression, this approach has broad implications in many areas of protein engineering, including antibody design, improving enzyme activity, and protein modification.

Deep phylogeny of cancer drivers and compensatory mutations

Driver mutations (DM) are the genetic impetus for most cancers. The DM are assumed to be deleterious in species evolution, being eliminated by purifying selection unless compensated by other mutations. We present deep phylogenies for 84 cancer driver genes and investigate the prevalence of 434 DM across gene-species trees. The DM are rare in species evolution, and 181 are completely absent, validating their negative fitness effect. The DM are more common in unicellular than in multicellular eukaryotes, suggesting a link between these mutations and cell proliferation control. 18 DM appear as the ancestral state in one or more major clades, including 3 among mammals. We identify within-gene, compensatory mutations for 98 DM and infer likely interactions between the DM and compensatory sites in protein structures. These findings elucidate the evolutionary status of DM and are expected to advance the understanding of the functions and evolution of oncogenes and tumor suppressors.

Rochman et al. present deep phylogenies for 84 cancer driver genes and examine the prevalence of driver mutations across gene-species trees. Their results show that driver mutations are rare in species evolution and give insight into the evolution of driver mutations and oncogenes.

Computational approaches to therapeutic antibody design: established methods and emerging trends

Antibodies are proteins that recognize the molecular surfaces of potentially noxious molecules to mount an adaptive immune response or, in the case of autoimmune diseases, molecules that are part of healthy cells and tissues. Due to their binding versatility, antibodies are currently the largest class of biotherapeutics, with five monoclonal antibodies ranked in the top 10 blockbuster drugs. Computational advances in protein modelling and design can have a tangible impact on antibody-based therapeutic development. Antibody-specific computational protocols currently benefit from an increasing volume of data provided by next generation sequencing and application to related drug modalities based on traditional antibodies, such as nanobodies. Here we present a structured overview of available databases, methods and emerging trends in computational antibody analysis and contextualize them towards the engineering of candidate antibody therapeutics.

Adaption of human antibody λ and κ light chain architectures to CDR repertoires

Monoclonal antibodies bind with high specificity to a wide range of diverse antigens, primarily mediated by their hypervariable complementarity determining regions (CDRs). The defined antigen binding loops are supported by the structurally conserved β-sandwich framework of the light chain (LC) and heavy chain (HC) variable regions. The LC genes are encoded by two separate loci, subdividing the entity of antibodies into kappa (LC_κ) and lambda (LC_λ) isotypes that exhibit distinct sequence and conformational preferences. In this work, a diverse set of techniques were employed including machine learning, force field analysis, statistical coupling analysis and mutual information analysis of a non-redundant antibody structure collection. Thereby, it was revealed how subtle changes between the structures of LC_κ and LC_λ isotypes increase the diversity of antibodies, extending the predetermined restrictions of the general antibody fold and expanding the diversity of antigen binding. Interestingly, it was found that the characteristic framework scaffolds of κ and λ are stabilized by diverse amino acid clusters that determine the interplay between the respective fold and the embedded CDR loops. In conclusion, this work reveals how antibodies use the remarkable plasticity of the beta-sandwich Ig fold to incorporate a large diversity of CDR loops.

Structural and mechanistic insights into the Keap1-Nrf2 system as a route to drug discovery

The proteins Keap1 and Nrf2 together act as a cytoprotective mechanism that enables cells to overcome electrophilic and oxidative stress. Research has shown that manipulating this system by modulating the Keap1-Nrf2 interaction either through inhibition at the binding interface or via the covalent modification of Keap1 could provide a powerful therapeutic strategy for a range of diseases. However, despite intensive investigation of the system and significant progress in the development of inhibitory small molecules, there is still much to learn about the pathways associated with the Keap1-Nrf2 system and the structural details underpinning its mechanism of action. In this review, we discuss how a deeper understanding could prove revolutionary in the development of new inhibitors and activators as well as guiding how to best harness Keap1 for targeted protein degradation.

Structure-Guided Design of a Peptide Lock for Modular Peptide Binders

Peptides play an important role in intermolecular interactions and are frequent analytes in diagnostic assays, also as unstructured, linear epitopes in whole proteins. Yet, due to the many different sequence possibilities even for short peptides, classical selection of binding proteins from a library, one at a time, is not scalable to proteomes. However, moving away from selection to a rational assembly of preselected modules binding to predefined linear epitopes would split the problem into smaller parts. These modules could then be reassembled in any desired order to bind to, in principle, arbitrary sequences, thereby circumventing any new rounds of selection. Designed Armadillo repeat proteins (dArmRPs) are modular, and they do bind elongated peptides in a modular way. Their consensus sequence carries pockets that prefer arginine and lysine. In our quest to select pockets for all amino acid side chains, we had discovered that repetitive sequences can lead to register shifts and peptide flipping during selections from libraries, hindering the selection of new binding specificities. To solve this problem, we now created an orthogonal binding specificity by a combination of grafting from β-catenin, computational design and mutual optimization of the pocket and the bound peptide. We have confirmed the design and the desired interactions by X-ray structure determination. Furthermore, we could confirm the absence of sliding in solution by a single-molecule Förster resonance energy transfer. The new pocket could be moved from the N-terminus of the protein to the middle, retaining its properties, further underlining the modularity of the system.

Homology Modeling-Based in Silico Affinity Maturation Improves the Affinity of a Nanobody

Affinity maturation and rational design have a raised importance in the application of nanobody (VHH), and its unique structure guaranteed these processes quickly done in vitro. An anti-CD47 nanobody, Nb02, was screened via a synthetic phage display library with 278 nM of K_D value. In this study, a new strategy based on homology modeling and Rational Mutation Hotspots Design Protocol (RMHDP) was presented for building a fast and efficient platform for nanobody affinity maturation. A three-dimensional analytical structural model of Nb02 was constructed and then docked with the antigen, the CD47 extracellular domain (CD47^ext). Mutants with high binding affinity are predicted by the scoring of nanobody-antigen complexes based on molecular dynamics trajectories and simulation. Ultimately, an improved mutant with an 87.4-fold affinity (3.2 nM) and 7.36 °C higher thermal stability was obtained. These findings might contribute to computational affinity maturation of nanobodies via homology modeling using the recent advancements in computational power. The add-in of aromatic residues which formed aromatic-aromatic interaction plays a pivotal role in affinity and thermostability improvement. In a word, the methods used in this study might provide a reference for rapid and efficient in vitro affinity maturation of nanobodies.

High-Throughput Antibody Structure Modeling and Design Using ABodyBuilder

Antibodies are proteins of the adaptive immune system; they can be designed to bind almost any molecule, and are increasingly being used as biotherapeutics. Experimental antibody design is an expensive and time-consuming process, and computational antibody design methods can now be used to help develop new therapeutics and diagnostics. Within the design pipeline, accurate antibody structure modeling is essential, as it provides the basis for antibody-antigen docking, binding affinity prediction, and estimating thermal stability. Ideally, models should be rapidly generated, allowing the exploration of the breadth of antibody space. This allows methods to replicate the natural processes of antibody diversification (e.g., V(D)J recombination and somatic hypermutation), and cope with large volumes of data that are typical of next-generation sequencing datasets. Here we describe ABodyBuilder and PEARS, algorithms that build and mutate antibody model structures. These methods take ~30 s to generate a model antibody structure.

Exploring new strategies for grafting binding peptides onto protein loops using a consensus-designed tetratricopeptide repeat scaffold

Peptide display approaches, in which peptide epitopes of known binding activities are grafted onto stable protein scaffolds, have been developed to constrain the peptide in its bioactive conformation and to enhance its stability. However, peptide grafting can be a lengthy process requiring extensive computational modeling and/or optimisation by directed evolution techniques. In this study, we show that ultra-stable consensus-designed tetratricopeptide repeat (CTPR) proteins are amenable to the grafting of peptides that bind the Kelch-like ECH-associated protein 1 (Keap1) onto the loop between adjacent repeats. We explore simple strategies to optimize the grafting process and show that modest improvements in Keap1-binding affinity can be obtained by changing the composition of the linker sequence flanking either side of the binding peptide.

Third generation antibody discovery methods: in silico rational design

Owing to their outstanding performances in molecular recognition, antibodies are extensively used in research and applications in molecular biology, biotechnology and medicine. Recent advances in experimental and computational methods are making it possible to complement well-established in vivo (first generation) and in vitro (second generation) methods of antibody discovery with novel in silico (third generation) approaches. Here we describe the principles of computational antibody design and review the state of the art in this field. We then present Modular, a method that implements the rational design of antibodies in a modular manner, and describe the opportunities offered by this approach.

Creation of artificial protein-protein interactions using α-helices as interfaces

Designing novel protein-protein interactions (PPIs) with high affinity is a challenging task. Directed evolution, a combination of randomization of the gene for the protein of interest and selection using a display technique, is one of the most powerful tools for producing a protein binder. However, the selected proteins often bind to the target protein at an undesired surface. More problematically, some selected proteins bind to their targets even though they are unfolded. Current state-of-the-art computational design methods have successfully created novel protein binders. These computational methods have optimized the non-covalent interactions at interfaces and thus produced artificial protein complexes. However, to date there are only a limited number of successful examples of computationally designed de novo PPIs. De novo design of coiled-coil proteins has been extensively performed and, therefore, a large amount of knowledge of the sequence-structure relationship of coiled-coil proteins has been accumulated. Taking advantage of this knowledge, de novo design of inter-helical interactions has been used to produce artificial PPIs. Here, we review recent progress in the in silico design and rational design of de novo PPIs and the use of α-helices as interfaces.