Methanol on the rocks: green rust transformation promotes the oxidation of methane

Shared coordination geometries between metal ions within reactive minerals and enzymatic metal cofactors hints at mechanistic and possibly evolutionary homology between particular abiotic chemical mineralogies and biological metabolism. The octahedral coordination of reactive Fe2+/3+ minerals such as green rusts, endemic to anoxic sediments and the early Earth's oceans, mirrors the di-iron reaction centre of soluble methane monooxygenase (sMMO), responsible for methane oxidation in methanotrophy. We show that methane oxidation occurs in tandem with the oxidation of green rust to lepidocrocite and magnetite, mimicking radical-mediated methane oxidation found in sMMO to yield not only methanol but also halogenated hydrocarbons in the presence of seawater. This naturally occurring geochemical pathway for CH4 oxidation elucidates a previously unidentified carbon cycling mechanism in modern and ancient environments and reveals clues into mineral-mediated reactions in the synthesis of organic compounds necessary for the emergence of life.

Activation and catalytic transformation of methane under mild conditions

In the last few decades, worldwide scientists have been motivated by the promising production of chemicals from the widely existing methane (CH₄) under mild conditions for both chemical synthesis with low energy consumption and climate remediation. To achieve this goal, a whole library of catalytic chemistries of transforming CH₄ to various products under mild conditions is required to be developed. Worldwide scientists have made significant efforts to reach this goal. These significant efforts have demonstrated the feasibility of oxidation of CH₄ to value-added intermediate compounds including but not limited to CH₃OH, HCHO, HCOOH, and CH₃COOH under mild conditions. The fundamental understanding of these chemical and catalytic transformations of CH₄ under mild conditions have been achieved to some extent, although currently neither a catalyst nor a catalytic process can be used for chemical production under mild conditions at a large scale. In the academic community, over ten different reactions have been developed for converting CH₄ to different types of oxygenates under mild conditions in terms of a relatively low activation or catalysis temperature. However, there is still a lack of a molecular-level understanding of the activation and catalysis processes performed in extremely complex reaction environments under mild conditions. This article reviewed the fundamental understanding of these activation and catalysis achieved so far. Different oxidative activations of CH₄ or catalytic transformations toward chemical production under mild conditions were reviewed in parallel, by which the trend of developing catalysts for a specific reaction was identified and insights into the design of these catalysts were gained. As a whole, this review focused on discussing profound insights gained through endeavors of scientists in this field. It aimed to present a relatively complete picture for the activation and catalytic transformations of CH₄ to chemicals under mild conditions. Finally, suggestions of potential explorations for the production of chemicals from CH₄ under mild conditions were made. The facing challenges to achieve high yield of ideal products were highlighted and possible solutions to tackle them were briefly proposed.

Electrocatalytic Methane Functionalization with d0 Early Transition Metals Under Ambient Conditions

The undesirable loss of methane (CH₄ ) at remote locations welcomes approaches that ambiently functionalize CH₄ on-site without intense infrastructure investment. Recently, we found that electrochemical oxidation of vanadium(V)-oxo with bisulfate ligand leads to CH₄ activation at ambient conditions. The key question is whether such an observation is a one-off coincidence or a general strategy for electrocatalyst design. Here, a general scheme of electrocatalytic CH₄ activation with d⁰ early transition metals is established. The pre-catalysts' molecular structure, electrocatalytic kinetics, and mechanism were detailed for titanium (IV), vanadium (V), and chromium (VI) species as model systems. After a turnover-limiting one-electron electrochemical oxidation, the yielded ligand-centered cation radicals activate CH₄ with low activation energy and high selectivity. The reactivities are universal among early transition metals from Period 4 to 6, and the reactivities trend for different early transition metals correlate with their d orbital energies across periodic table. Our results offer new chemical insights towards developing advanced ambient electrocatalysts of natural gas.

Lanthanum modified Fe-ZSM-5 zeolites for selective methane oxidation with H2O2

Lanthanum modified Fe-ZSM-5 catalyst can both increase selective methane oxidation performance and decrease H2O2 consumption.

Mechanistic understanding of methane-to-methanol conversion on graphene-stabilized single-atom iron centers

DFT calculations and kinetic modeling elucidate solvent effects and complex mechanisms for the room-temperature methane-to-methanol conversion on an FeN4/graphene catalyst.

Ambient methane functionalization initiated by electrochemical oxidation of a vanadium (V)-oxo dimer

The abundant yet widely distributed methane resources require efficient conversion of methane into liquid chemicals, whereas an ambient selective process with minimal infrastructure support remains to be demonstrated. Here we report selective electrochemical oxidation of CH₄ to methyl bisulfate (CH₃OSO₃H) at ambient pressure and room temperature with a molecular catalyst of vanadium (V)-oxo dimer. This water-tolerant, earth-abundant catalyst possesses a low activation energy (10.8 kcal mol^‒1) and a high turnover frequency (483 and 1336 hr⁻¹ at 1-bar and 3-bar pure CH₄, respectively). The catalytic system electrochemically converts natural gas mixture into liquid products under ambient conditions over 240 h with a Faradaic efficiency of 90% and turnover numbers exceeding 100,000. This tentatively proposed mechanism is applicable to other d⁰ early transition metal species and represents a new scalable approach that helps mitigate the flaring or direct emission of natural gas at remote locations.

The undesirable geological release of methane at remote locations can be lessened through an efficient methane conversion process. Here, the authors report selective ambient functionalization of methane by a vanadium (V)-oxo electrocatalyst with a low activation energy and a high turnover frequency.

Direct and Selective Photocatalytic Oxidation of CH4 to Oxygenates with O2 on Cocatalysts/ZnO at Room Temperature in Water

Direct conversion of methane into methanol and other liquid oxygenates still confronts considerable challenges in activating the first C-H bond of methane and inhibiting overoxidation. Here, we report that ZnO loaded with appropriate cocatalysts (Pt, Pd, Au, or Ag) enables direct oxidation of methane to methanol and formaldehyde in water using only molecular oxygen as the oxidant under mild light irradiation at room temperature. Up to 250 micromoles of liquid oxygenates with ∼95% selectivity is achieved for 2 h over 10 mg of ZnO loaded with 0.1 wt % of Au. Experiments with isotopically labeled oxygen and water reveal that molecular O₂, rather than water, is the source of oxygen for direct CH₄ oxidation. We find that ZnO and cocatalyst could concertedly activate CH₄ and O₂ into methyl radical and mildly oxidative intermediate (hydroperoxyl radical) in water, which are two key precursor intermediates for generating oxygenated liquid products in direct CH₄ oxidation. Our study underlines two equally significant aspects for realizing direct and selective photooxidation of CH₄ to liquid oxygenates, i.e., efficient C-H bond activation of CH₄ and controllable activation of O₂.

Mechanistic Complexity of Methane Oxidation with H2O2 by Single-Site Fe/ZSM-5 Catalyst

Periodic density functional theory (DFT) calculations were carried out to investigate the mechanism of methane oxidation with H₂O₂ over the defined Fe sites in Fe/ZSM-5 zeolite. The initial Fe site is modeled as a [(H₂O)₂–Fe(III)–(μO)₂–Fe(III)–(H₂O)₂]²⁺ extraframework cluster deposited in the zeolite pore and charge-compensated by two anionic lattice sites. The activation of this cluster with H₂O₂ gives rise to the formation of a variety of Fe(III)-oxo and Fe(IV)-oxo complexes potentially reactive toward methane dissociation. These sites are all able to promote the first C–H bond cleavage in methane by following three possible reaction mechanisms: namely, (a) heterolytic and (b) homolytic methane dissociation as well as (c) Fenton-type reaction involving free OH radicals as the catalytic species. The C–H activation step is followed by formation of MeOH and MeOOH and regeneration of the active site. The Fenton-type path is found to proceed with the lowest activation barrier. Although the barriers for the alternative heterolytic and homolytic pathways are found to be somewhat higher, they are still quite favorable and are expected to be feasible under reaction conditions, resulting ultimately in MeOH and MeOOH products. H₂O₂ oxidant competes with CH₄ substrate for the same sites. Since the oxidation of H₂O₂ to O₂ and two [H⁺] is energetically more favorable than the C–H oxofunctionalization, the overall efficiency of the latter target process remains low.

The Combination of Hydrogen and Methanol Production through Artificial Photosynthesis-Are We Ready Yet?

Because 100 % quantum efficiency for the photosynthetic production of H₂ from H₂ O under visible illumination has been achieved recently, the oxidation of H₂ O to O₂ remains the bottleneck to the overall water-splitting reaction. Oxidation of CH₄ to CH₃ OH might be combined with water reduction instead, so that H₂ and CH₃ OH chemical fuels can be simultaneously produced through a one-step process under solar illumination. This combination would be a promising approach towards a more sustainable future of chemistry, in which developing different strategies for artificial photosynthesis is of paramount importance. By using free and adsorbed HO^. radicals on the semiconductor surface, CH₄ can be activated to H₃ C^. radicals and converted into CH₃ OH, respectively, with great selectivity up to 100 %. The present lack of efficient photosynthetic systems for the formation of H₂ and CH₃ OH from abundant H₂ O and CH₄ motivates future research for basic science and industrial applications.

New oxidovanadium(iv) complex with a BIAN ligand: synthesis, structure, redox properties and catalytic activity

The combination of a new oxidovanadium(iv) complex1with pyrazine-2-carboxylic acid (PCA; a cocatalyst) affords a catalytic system for the efficient oxidation of saturated hydrocarbons.

Homogeneous Functionalization of Methane

One of the remaining "grand challenges" in chemistry is the development of a next generation, less expensive, cleaner process that can allow the vast reserves of methane from natural gas to augment or replace oil as the source of fuels and chemicals. Homogeneous (gas/liquid) systems that convert methane to functionalized products with emphasis on reports after 1995 are reviewed. Gas/solid, bioinorganic, biological, and reaction systems that do not specifically involve methane functionalization are excluded. The various reports are grouped under the main element involved in the direct reactions with methane. Central to the review is classification of the various reports into 12 categories based on both practical considerations and the mechanisms of the elementary reactions with methane. Practical considerations are based on whether or not the system reported can directly or indirectly utilize O₂ as the only net coreactant based only on thermodynamic potentials. Mechanistic classifications are based on whether the elementary reactions with methane proceed by chain or nonchain reactions and with stoichiometric reagents or catalytic species. The nonchain reactions are further classified as CH activation (CHA) or CH oxidation (CHO). The bases for these various classifications are defined. In particular, CHA reactions are defined as elementary reactions with methane that result in a discrete methyl intermediate where the formal oxidation state (FOS) on the carbon remains unchanged at -IV relative to that in methane. In contrast, CHO reactions are defined as elementary reactions with methane where the carbon atom of the product is oxidized and has a FOS less negative than -IV. This review reveals that the bulk of the work in the field is relatively evenly distributed across most of the various areas classified. However, a few areas are only marginally examined, or not examined at all. This review also shows that, while significant scientific progress has been made, greater advances, particularly in developing systems that can utilize O₂, will be required to develop a practical process that can replace the current energy and capital intensive natural gas conversion process. We believe that this classification scheme will provide the reader with a rapid way to identify systems of interest while providing a deeper appreciation and understanding, both practical and fundamental, of the extensive literature on methane functionalization. The hope is that this could accelerate progress toward meeting this "grand challenge."

Recent advances in heterogeneous selective oxidation catalysis for sustainable chemistry

Oxidation catalysis not only plays a crucial role in the current chemical industry for the production of key intermediates such as alcohols, epoxides, aldehydes, ketones and organic acids, but also will contribute to the establishment of novel green and sustainable chemical processes. This review is devoted to dealing with selective oxidation reactions, which are important from the viewpoint of green and sustainable chemistry and still remain challenging. Actually, some well-known highly challenging chemical reactions involve selective oxidation reactions, such as the selective oxidation of methane by oxygen. On the other hand some important oxidation reactions, such as the aerobic oxidation of alcohols in the liquid phase and the preferential oxidation of carbon monoxide in hydrogen, have attracted much attention in recent years because of their high significance in green or energy chemistry. This article summarizes recent advances in the development of new catalytic materials or novel catalytic systems for these challenging oxidation reactions. A deep scientific understanding of the mechanisms, active species and active structures for these systems are also discussed. Furthermore, connections among these distinct catalytic oxidation systems are highlighted, to gain insight for the breakthrough in rational design of efficient catalytic systems for challenging oxidation reactions.

Synthesis and Characterization of Scandium Silyl Complexes of the Type Cp*2ScSiHRR‘. σ-Bond Metathesis Reactions and Catalytic Dehydrogenative Silation of Hydrocarbons

The scandium dihydrosilyl complexes Cp*(2)ScSiH(2)R (R = Mes (4), Trip (5), SiPh(3) (6), Si(SiMe(3))(3) (7); Mes = 2,4,6-Me(3)C(6)H(2), Trip = 2,4,6-(i)()Pr(3)C(6)H(2)) and Cp*(2)ScSiH(SiMe(3))(2) (8) were synthesized by addition of the appropriate hydrosilane to Cp*(2)ScMe (1). Studies of these complexes in the context of hydrocarbon activation led to discovery of catalytic processes for the dehydrogenative silation of hydrocarbons (including methane, isobutene and cyclopropane) with Ph(2)SiH(2) via sigma-bond metathesis.

Homogeneous catalysis with methane. A strategy for the hydromethylation of olefins based on the nondegenerate exchange of alkyl groups and sigma-bond metathesis at scandium

The scandium alkyl Cp*(2)ScCH(2)CMe(3) (2) was synthesized by the addition of a pentane solution of LiCH(2)CMe(3) to Cp*(2)ScCl at low temperature. Compound 2 reacts with the C-H bonds of hydrocarbons including methane, benzene, and cyclopropane to yield the corresponding hydrocarbyl complex and CMe(4). Kinetic studies revealed that the metalation of methane proceeds exclusively via a second-order pathway described by the rate law: rate = k[2][CH(4)] (k = 4.1(3) x 10(-4) M(-1)s(-1) at 26 degrees C). The primary inter- and intramolecular kinetic isotope effects (k(H)/k(D) = 10.2 (CH(4) vs CD(4)) and k(H)/k(D) = 5.2(1) (CH(2)D(2)), respectively) are consistent with a linear transfer of hydrogen from methane to the neopentyl ligand in the transition state. Activation parameters indicate that the transformation involves a highly ordered transition state (DeltaS++ = -36(1) eu) and a modest enthalpic barrier (DeltaH++ = 11.4(1) kcal/mol). High selectivity toward methane activation suggested the participation of this chemistry in a catalytic hydromethylation, which was observed in the slow, Cp*(2)ScMe-catalyzed addition of methane across the double bond of propene to form isobutane.