Determination of hexamethylene diisocyanate-based isocyanates in spray-painting operations. Part 2. Comparison of high performance liquid chromatography with capillary zone electrophoresis

Molecular Characterization and Experimental Utility of Monoclonal Antibodies with Specificity for Aliphatic Di- and Polyisocyanates

Aliphatic di- and polyisocyanates are crucial chemical ingredients in many industrial processes and are a well-recognized cause of occupational asthma. Serologic detection of "chemical epitopes" in biological samples could serve as an exposure surveillance approach toward disease prevention, and thus we sought to generate aliphatic isocyanate-specific monoclonal antibodies (mAbs). Three hybridomas were generated from Balb/c mice immunized with a commercial product containing a combination of uretdione, homopolymer, and monomeric forms of hexamethylene diisocyanate (HDI). Three stable hybridomas were subcloned by limiting dilution, two secreting IgG1κ and one secreting IgMκ mAb that bind aliphatic di- and polyisocyanates (conjugated to albumin), but not aromatic toluene or methylene diphenyl diisocyanate (TDI or MDI). Each mAb demonstrates slight differences in epitope specificity, for example, recognition of hydrogenated MDI (HMDI) or different carrier proteins (transferrin, actin) reacted with vapor phase HDI, and is encoded by unique recombination of different germline antibody genes, with distinct complementary determining regions. By western blot, all three mAbs detect a molecule with characteristics of an albumin adduct uniquely in urine from mice skin exposed to a mixture of aliphatic di- and polyisocyanate. Together, the data define molecular determinants of humoral immune recognition of aliphatic di- and polyisocyanates through new mAbs, which will serve as useful research reagents and may be applicable to future exposure surveillance efforts.

Determination of isocyanates by capillary electrophoresis with tris(2,2'-bipyridine)ruthenium(II) electrochemiluminescence

CE with tris(2,2'-bipyridyl) ruthenium(II) (Ru(bpy)(3) (2+)) electrochemiluminescence (ECL) detection for the quantitative determination of isocyanates was first reported. Hexamethylene diisocyanate (HDI) and hexyl isocyanate (HI) were used as the model analytes. Commercially available N,N-diethyl-N'-methylethylenediamine was used as the derivatization reagent. It has both a secondary amine group and a tertiary amine group. The secondary amine group can quantitatively react with isocyanate group, and the tertiary amine group can react with Ru(bpy)(3) (2+) to produce strong ECL signal for sensitive detection. The derivatization reaction was almost instantaneous and is much faster than other reported derivative reactions using other derivative reagents. The urea formed was stable. Linear calibration curve was obtained in the range from 0.01 to 10 microM for HDI, and 0.02 to 20 microM for hexyl isocyanate (HI). The detection limit is 0.01 microM for HDI and 0.02 microM for HI. The method is more sensitive than UV-detection and electrochemical detection. For practical application, recovery higher than 90% for HDI and HI was obtained for foam sample.

Determination of airborne isocyanates

Isocyanates are important in industrial hygiene and workplace monitoring. Owing to their severe acute toxicity and sensitizing properties, analytical methods with high sampling efficiency and sensitivity in the low ppb to ppt range are required. The reactivity of isocyanates necessitates initial derivatization with nucleophilic agents--usually amines--for stabilization and enrichment; this is often followed by chromatographic separation with spectroscopic, electrochemical, or mass spectrometric detection. Sampling strategies for airborne isocyanates comprise active, i.e. pumped, or passive, i.e. diffusive, methods; the method selected depends on the application. Whereas active methods rely mainly on impingers, reagent-coated filters, or sampling tubes, passive samplers make use of reagent-coated filters, the surface of which is connected to the air sample by diffusion channels. Because airborne isocyanates are prone to occur in different forms, i.e. as vapors, as aerosols, or adsorbed on particulate matter, denuder sampling has been introduced, thus enabling simultaneous collection of gaseous and aerosol isocyanates. The first part of this review summarizes chemical methods and reagents which have been introduced for derivatization of airborne isocyanates. The advantages and drawbacks of the individual derivatization procedures and their combination with different detection principles are evaluated. In the second part, the most recent developments in air sampling for isocyanates, with special focus on diffusive sampling, are reviewed and critically discussed.

Validation of a diffusive sampling method for airborne low-molecular isocyanates using 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole-impregnated filters and liquid chromatography–tandem mass spectrometry

A diffusive sampling method for the determination of low-molecular isocyanates as their 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ) derivatives using tandem mass spectrometry (MS/MS) after atmospheric pressure chemical ionisation (APCI) is presented. Isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC) and phenyl isocyanate (PhIC) are collected on NBDPZ-impregnated polystyrene divinyl benzene (SDB) filter tapes. The method was validated for MIC, EIC and PhIC for concentrations between 0.5 and 50 ppb at relative humidity (RH) conditions from 10 up to 90%. Validation was carried out by active sampling using 1-(2-methoxyphenyl)piperazine (2-MP) as derivatising agent. Sampling periods applied were between 15 min and more than 8 h. The sampling rates were determined to be 21.0 mL/min for MIC with a relative standard deviation (RSD) of 9.0% for 184 samplers, 15.6 mL/min for EIC (RSD 11.6%; N = 154) and 11.5 mL/min for PhIC (RSD 8.4%; N = 87). The limits of quantification were 1.4 ppb for MIC and 1.3 ppb for EIC and PhIC applying 15 min sampling periods. Owing to high background signals, isocyanic acid could only be determined when it was present in concentrations in the high ppb range.

Flow-Injection Chemiluminescence Determination of Formaldehyde with a Bromate-Rhodamine 6G System

In this paper, a novel flow-injection chemiluminescence (CL) system for the determination of formaldehyde is described. It is based on a strong enhance effect of formaldehyde on the weak CL emission of the reaction between potassium bromate and rhodamine 6G in a sulfuric acid medium. A possible mechanism for this CL reaction is proposed. A CL calibration graph was linear in the range of 0.8 - 200 microg l(-1) and the detection limit was 0.3 microg l(-1) (3sigma). The relative standard deviation was less than 3% for 10 microg l(-1) formaldehyde (n = 11). The method has been applied to determine formaldehyde in the air samples.