Laser-induced cavitation based micropump

Configurable Vibrational Coupling in Laser-Induced Microsecond Oscillations of Multi-Microbubble System

Microbubbles in liquids dynamically change their volumes through iterative vaporization and gas compression, driving highly localized (≈5 µm) and rapidly oscillating (≈1 MHz) flows. In contrast to an isolated bubble, closely spaced multiple bubbles can potentially induce not only stronger flows but also more complex flow profiles that are spatially and temporally regulated. However, precise on-demand control of bubble distance and the associated interactions between bubbles has remained elusive, limiting their applications in microfluidics. This study demonstrates the induction of two laser-induced microbubbles with configurable separations ranging from 14 to 92 µm with 1 µm precision. These microbubbles self-oscillating at sub-MHz frequencies are generated via photothermal heating, and their dynamics are captured in real-time using a high-speed camera. When the bubbles are in proximity (< 50 µm), their oscillation profiles are in stark contrast to those of an isolated bubble, exhibiting hybridized in-phase and anti-phase vibrations. The distance-dependent evolution of the coupled oscillation frequency, ranging from 0.5 to 0.8 MHz is quantitatively reproduced, using an extended Rayleigh-Plesset equation that accounts for pressure interactions. The findings pave the way for leveraging multiple microbubble arrays to generate complex yet well-regulated spatiotemporal flows previously unattainable in microfluidics.

Continuous motion of particles attached to cavitation bubbles

Microbubble-mediated therapeutic gene or drug delivery is a promising strategy for various cardiovascular diseases (CVDs), but the efficiency and precision need to be improved. Here, we propose a cavitation bubble-driven drug delivery strategy that can be applied to CVDs. A bubble-pulse-driving theory was proposed, and the formula of time-averaged thrust driven by bubble pulses was derived. The continuous motion of particles propelled by cavitation bubbles in the ultrasonic field is investigated experimentally by high-speed photography. The cavitation bubbles grow and collapse continuously, and generate periodic pulse thrust to drive the particles to move in the liquid. Particles attached to bubbles will move in various ways, such as ejection, collision, translation, rotation, attitude variation, and circular motion. The cavity attached to the particle is a relatively large cavitation bubble, which does not collapse to the particle surface, but to the axis of the bubble perpendicular to the particle surface. The cavitation bubble expands spherically and collapses asymmetrically, which makes the push on the particle generated by the bubble expansion greater than the pull on the particle generated by the bubble collapse. The time-averaged force of the cavitation bubble during its growth and collapse is the cavitation-bubble-driven force that propels the particle. Both the cavitation-bubble-driven force and the primary Bjerknes force act in the same position on the particle surface, but in different directions. In addition to the above two forces, particles are also affected by the mass force acting on the center of mass and the motion resistance acting on the surface, so the complex motion of particles can be explained.

A microfluidics vapor-membrane-valve generated by laser irradiation on carbon nanocoils

We have investigated a micro vapor membrane valve (MVMV) for closing the microfluidic channels by laser irradiation on carbon nanocoils (CNCs) attached to the inner wall of the microchannels. The microchannel with MVMVs was found to exhibit a "closed" state without the supply of laser energy, which is explained on the basis of the theory of heat and mass transfer. Multiple MVMVs for sealing the channels can be generated in sequence and exist simultaneously at different irradiation sites, independently. The significant advantages of the MVMV generated by the laser irradiation on CNCs are the elimination of extrinsic energy required to maintain the microfluidic channel "closed" state and the simplification of the structure integrated into the microfluidic channels and fluid control circuitries. The CNC-based MVMV is a powerful tool for the investigations of the functions of microchannel switching and sealing on microfluidic chips in biomedicine, chemical analysis and other fields. The study of MVMVs will have great significance for biochemical and cytological analysis.

Low-cost fluorescence microscope with microfluidic device fabrication for optofluidic applications

Optofluidic devices have revolutionized the manipulation and transportation of fluid at smaller length scales ranging from micrometers to millimeters. We describe a dedicated optical setup for studying laser-induced cavitation inside a microchannel. In a typical experiment, we use a tightly focused laser beam to locally evaporate the solution laced with a dye resulting in the formation of a microbubble. The evolving bubble interface is tracked using high-speed microscopy and digital image analysis. Furthermore, we extend this system to analyze fluid flow through fluorescence-Particle Image Velocimetry (PIV) technique with minimal adaptations. In addition, we demonstrate the protocols for the in-house fabrication of a microchannel tailored to function as a sample holder in this optical setup. In essence, we present a complete guide for constructing a fluorescence microscope from scratch using standard optical components with flexibility in the design and at a lower cost compared to its commercial analogues.

Breaking through Barriers: Ultrafast Microbullet Based on Cavitation Bubble

Micromotors hold great promise for extensive practical applications such as those in biomedical domains and reservoir exploration. However, insufficient propulsion of the micromotor limits its application in crossing biological barriers and breaking reservoir boundaries. In this study, an ultrafast microbullet based on laser cavitation that can utilize the energy of a cavitation bubble and realize its own hurtling motion is reported. The experiments are performed using high-speed photography. A boundary integral method is adopted to reveal the motion mechanism of a polystyrene (PS)/magnetic nanoparticle (MNP) microbullet under the action of laser cavitation. Furthermore, the influence of certain factors (including laser intensity, microbullet size, and ambient temperature) on the motion of the microbullet was explored. For the PS/MNP microbullet driven by laser cavitation, the instantaneous velocity obtained can reach 5.23 m s^-1 . This strategy of driving the PS/MNP microbullet provides strong penetration ability and targeted motion. It is believed that the reported propulsion mechanism opens up new possibilities for micromotors in a wide range of engineering applications.

The effect of scalable PDMS gas-entrapping microstructures on the dynamics of a single cavitation bubble

The effect of gas-entrapping polydimethylsiloxane (PDMS) microstructures on the dynamics of cavitation bubbles laser-induced next to the PDMS surface is investigated and compared against the cavitation dynamics next to a flat smooth boundary. Local pressure gradients produced by a cavitation bubble cause the air pockets entrapped in the PDMS microstructures to expand and oscillate, leading to a repulsion of the cavitation bubble. The microstructures were fabricated as boxed crevices via a simple and scalable laser ablation technique on cast acrylic, allowing for testing of variable structure sizes and reusable molds. The bubble dynamics were observed using high speed photography and the surrounding flows were visualized and quantified using particle tracking velocimetry. Smaller entrapped air pockets showed an enhanced ability to withstand deactivation at three stand-off distances and over 50 subsequent cavitation events. This investigation provides insight into the potential to direct the collapse of a cavitation bubble away from a surface to mitigate erosion or to enhance microfluidic mixing in low Reynolds number flows.

Directional transport and random motion of particles in ALF ultrasonic cavitation structure

The motion of particles of different properties and sizes in ALF ultrasonic cavitation structure is investigated experimentally with high-speed photography. Particles tend to transport along the bubble chain and move towards the focus repeatedly and predictably in ALF cavitation structures. Particles at the focus aggregate and separate alternately over time. The separation of particles mainly occurs in the expansion process of cavitation bubbles, while the movement and aggregation of particles mostly take place during the collapse stage. The directional transport of particles along the bubble chain of ALF cavitation cloud and the random aggregation and dispersion at the focus of ALF are all related to the cavitation bubbles attached to the particles. The directional transportation (predictable, repeatable and pipeline-free) and aggregation of particles in ALF cavitation clouds may be used in special occasions, for example, drug delivery and targeted therapy.

Single-shot interferometric measurement of cavitation bubble dynamics

We demonstrate an interferometric method to provide direct, single-shot measurements of cavitation bubble dynamics with nanoscale spatial and temporal resolution with results that closely match theoretical predictions. Implementation of this method reduces the need for expensive and complex ultra-high speed camera systems for the measurement of single cavitation events. This method can capture dynamics over large time intervals with sub-nanosecond temporal resolution and spatial precision surpassing the optical diffraction limit. We expect this method to have broad utility for examination of cavitation bubble dynamics, as well as for metrology applications such as optorheological materials characterization. This method provides an accurate approach for precise measurement of cavitation bubble dynamics suitable for metrology applications such as optorheological materials characterization.

Ultrasound and microbubble mediated therapeutic delivery: Underlying mechanisms and future outlook

Beyond the emerging field of oncological ultrasound molecular imaging, the recent significant advancements in ultrasound and contrast agent technology have paved the way for therapeutic ultrasound mediated microbubble oscillation and has shown that this approach is capable of increasing the permeability of microvessel walls while also initiating enhanced extravasation and drug delivery into target tissues. In addition, a large number of preclinical studies have demonstrated that ultrasound alone or combined with microbubbles can efficiently increase cell membrane permeability resulting in enhanced tissue distribution and intracellular drug delivery of molecules, nanoparticles, and other therapeutic agents. The mechanism behind the enhanced permeability is the temporary creation of pores in cell membranes through a phenomenon called sonoporation by high-intensity ultrasound and microbubbles or cavitation agents. At low ultrasound intensities (0.3-3 W/cm²), sonoporation may be caused by microbubbles oscillating in a stable motion, also known as stable cavitation. In contrast, at higher ultrasound intensities (greater than 3 W/cm²), sonoporation usually occurs through inertial cavitation that accompanies explosive growth and collapse of the microbubbles. Sonoporation has been shown to be a highly effective method to improve drug uptake through microbubble potentiated enhancement of microvascular permeability. In this review, the therapeutic strategy of using ultrasound for improved drug delivery are summarized with the special focus on cancer therapy. Additionally, we discuss the progress, challenges, and future of ultrasound-mediated drug delivery towards clinical translation.

Photocontrol of a microbubble in a fiber-based hollow microstructure

We experimentally demonstrated a novel photocontrol scheme of a microbubble. The microbubble was confined in a fiber-based hollow microstructure and its movement was driven by the laser-induced photothermal Marangoni force. The position of the microbubble was controlled at a micrometer scale by simply adjusting the drive laser power. This scheme permitted the firsthand control of a microbubble with a divergent single laser beam. As a practical demonstration, we proposed a variable fiber all-optical attenuator by exploiting the total internal reflection on the surface of the photo-controlled microbubble to modulate the target light beam. The experimental results showed that such a compact fiber attenuator possessed a low insertion loss of 0.83 dB, a maximum extinction ratio of 28.7 dB, and had potential to be integrated into the lab-on-a-chip for the modulation of the light beam power.

A review of bubble break-up

The coalescence and break-up of bubbles are important steps in many industrial processes. To date, most of the literature has been focussed on the coalescence process which has been studied using high speed cinematographic techniques. However, bubble break-up is equally important and requires further research. This review essentially details the break-up process and initially summarizes the different types of bubble deformation processes which lead to break-up. Break-up is considered in high and low turbulent (pseudo-static) conditions and the effect of fluctuations and shear forces on the break-up is reviewed. Different mechanisms of break-up are discussed including shearing-off, coalescence induced pitching and impact pinching following air entrapment. Also, the influence of bubble size, interfacial stability, and surfactant on break-up are reviewed and a summary of recent experimental techniques presented. Finally, the break-up process which occurs in micro-fluidics is summarized.

Nip the bubble in the bud: a guide to avoid gas nucleation in microfluidics

Gas bubbles are almost a routine occurrence encountered by researchers working in the field of microfluidics. The spontaneous and unexpected nature of gas bubbles represents a major challenge for experimentalists and a stumbling block for the translation of microfluidic concepts to commercial products. This is a startling example of successful scientific results in the field overshadowing the practical hurdles of day-to-day usage. We however believe such hurdles can be overcome with a sound understanding of the underlying conditions that lead to bubble formation. In this tutorial, we focus on the two main conditions that result in bubble nucleation: surface nuclei and gas supersaturation in liquids. Key theoretical concepts such as Henry's law, Laplace pressure, the role of surface properties, nanobubbles and surfactants are presented along with a view of practical implementations that serve as preventive and curative measures. These considerations include not only microfluidic chip design and bubble traps but also often-overlooked conditions that regulate bubble formation, such as gas saturation under pressure or temperature gradients. Scenarios involving electrolysis, laser and acoustic cavitation or T-junction/co-flow geometries are also explored to provide the reader with a broader understanding on the topic. Interestingly, despite their often-disruptive nature, gas bubbles have also been cleverly utilized for certain practical applications, which we briefly review. We hope this tutorial will provide a reference guide in helping to deal with a familiar foe, the "bubble".

Direction control of quasi-stokeslet induced by thermoplasmonic heating of a water vapor microbubble

We investigate the control of flow direction around a water vapor bubble using the thermoplasmonic effect of a gold nanoisland film (GNF) under laser irradiation with multiple spots. By focusing a laser spot on the GNF immersed in degassed water, a water vapor bubble with a diameter of ~10 μm is generated. Simultaneously, a sub laser spot was focused next to the bubble to yield a temperature gradient in the direction parallel to the GNF surface. Consequently, rapid flow was generated around the bubble, whose flow direction was dependent on the power of the sub laser spot. The observed flow was well-described using a stokeslet; the latter contained components normal and parallel to the GNF surface and was set to 10 μm above the GNF. This technique allows us to apply a significant force on the microfluid at the vicinity of the wall in the direction parallel to the wall surface, where the flow speed is generally suppressed by viscosity. It is expected to be useful for microfluidic pumping and microfluidic thermal management.

Experimental investigation on multiple breakdown in water induced by focused nanosecond laser

Multiple breakdowns in liquids still remains obscure for its complex, non-equilibrium and transient dynamic process. We introduced three methods, namely, plasma imaging, light-scattering technique, and acoustic detection, to measure the multiple breakdown in water induced by focused nanosecond laser pulses simultaneously. Our results showed that linear dependence existed among the cavitation-bubble lifetime, the far-field peak pressure of the initial shock wave, and the corresponding plasma volume. Such a relationship can be used to evaluate the ideal size and energy of each bubble during multiple breakdown. The major bubble lifetime was hardly affected by the inevitable coalescence of cavitation bubbles, thereby confirming the availability of light-scattering technique on the estimation of bubble size during multiple breakdown. Whereas, the strength of collapse-shock-wave and the subsequent rebound of bubbles was strongly influenced, i.e., the occurrence of multiple breakdown suppressed the cavitation-bubble energy being converted into collapse-shock-wave energy but enhanced conversion into rebound-bubble energy. This study is a valuable contribution to research on the rapid mixing of microfluidics, damage control of microsurgery, and photoacoustic applications.

Photothermal generation of programmable microbubble array on nanoporous gold disks

We present a novel technique to generate microbubbles photothermally by continuous-wave laser irradiation of nanoporous gold disk (NPGD) array covered microfluidic channels. When a single laser spot is focused on the NPGDs, a microbubble can be generated with controlled size by adjusting the laser power. The dynamics of both bubble growth and shrinkage are studied. Using computer-generated holography on a spatial light modulator (SLM), simultaneous generation of multiple microbubbles at arbitrary locations with independent control is demonstrated. A potential application of flow manipulation is demonstrated using a microfluidic X-shaped junction. The advantages of this technique are flexible bubble generation locations, long bubble lifetimes, no need for light-adsorbing dyes, high controllability over bubble size, and relatively lower power consumption.

Microparticle manipulation using femtosecond photonic nanojet-assisted laser cavitation

We report the effect of laser cavitation in water initiated by femtosecond pulses confined into subwavelength volume of photonic nanojet of spherical microparticles. The effect of nanoscale optical breakdown was employed for controllable and nondestructive micromanipulation of silica microspheres. We combine this technique with optical trapping for cyclic particle movements and estimate a peak velocity and an acceleration acquired by microspheres propelled by nanojet cavitation. Our study provides a strategy for nondestructive optical micromanipulation, cavitation-assisted drug delivery, and laser energy transduction in microdevices.

Fundamentals of Laser-Based Hydrogel Degradation and Applications in Cell and Tissue Engineering

The cell and tissue engineering fields have profited immensely through the implementation of highly structured biomaterials. The development and implementation of advanced biofabrication techniques have established new avenues for generating biomimetic scaffolds for a multitude of cell and tissue engineering applications. Among these, laser-based degradation of biomaterials is implemented to achieve user-directed features and functionalities within biomimetic scaffolds. This review offers an overview of the physical mechanisms that govern laser-material interactions and specifically, laser-hydrogel interactions. The influences of both laser and material properties on efficient, high-resolution hydrogel degradation are discussed and the current application space in cell and tissue engineering is reviewed. This review aims to acquaint readers with the capability and uses of laser-based degradation of biomaterials, so that it may be easily and widely adopted.

Quantitative microfluidic delivery based on an optical breakdown-driven micro-pump for the fabrication of fiber functional devices

An optical breakdown-driven micro-pump was reported to deliver the quantitative liquid to the fiber microstructure efficiently. The amount of the pumped liquid can be controlled by adjusting the irradiation time of the femtosecond laser pulses. Such a method of microfluidic delivery has potential for the fabrication of fiber functional devices and the rapid injection of analytes into a lab-in-fiber for chemical and biological analysis. As a demonstration, a fiber spirit level based on a mobile microbubble was achieved by pumping nanoliter scale liquid into a fiber micro-cavity with this method.

A Micromanipulator and Transporter Based on Vibrating Bubbles in an Open Chip Environment

A novel micromanipulation technique of multi-objectives based on vibrating bubbles in an open chip environment is described in this paper. Bubbles were created in an aqueous medium by the thermal energy converted from a laser. When the piezoelectric stack fixed under the chip vibrated the bubbles, micro-objects (microparticles, cells, etc.) rapidly moved towards the bubbles. Results from numerical simulation demonstrate that convective flow around the bubbles can provide forces to capture objects. Since bubbles can be generated at arbitrary destinations in the open chip environment, they can act as both micromanipulators and transporters. As a result, micro- and bio-objects could be collected and transported effectively as masses in the open chip environment. This makes it possible for scientific instruments, such as atomic force microscopy (AFM) and scanning ion conductive microscopy (SICM), to operate the micro-objects directly in an open chip environment.

Characterization of periodic cavitation in optical tweezers

Microscopic vapor explosions or cavitation bubbles can be generated repeatedly in optical tweezers with a microparticle that partially absorbs at the trapping laser wavelength. In this work we measure the size distribution and the production rate of cavitation bubbles for microparticles with a diameter of 3 μm using high-speed video recording and a fast photodiode. We find that there is a lower bound for the maximum bubble radius R(max)∼2  μm which can be explained in terms of the microparticle size. More than 94% of the measured R(max) are in the range between 2 and 6 μm, while the same percentage of the measured individual frequencies f(i) or production rates are between 10 and 200 Hz. The photodiode signal yields an upper bound for the lifetime of the bubbles, which is at most twice the value predicted by the Rayleigh equation. We also report empirical relations between R(max), f(i), and the bubble lifetimes.

In vitro methods to study bubble-cell interactions: Fundamentals and therapeutic applications

Besides their use as contrast agents for ultrasound imaging, microbubbles are increasingly studied for a wide range of therapeutic applications. In particular, their ability to enhance the uptake of drugs through the permeabilization of tissues and cell membranes shows great promise. In order to fully understand the numerous paths by which bubbles can interact with cells and the even larger number of possible biological responses from the cells, thorough and extensive work is necessary. In this review, we consider the range of experimental techniques implemented in in vitro studies with the aim of elucidating these microbubble-cell interactions. First of all, the variety of cell types and cell models available are discussed, emphasizing the need for more and more complex models replicating in vivo conditions together with experimental challenges associated with this increased complexity. Second, the different types of stabilized microbubbles and more recently developed droplets and particles are presented, followed by their acoustic or optical excitation methods. Finally, the techniques exploited to study the microbubble-cell interactions are reviewed. These techniques operate over a wide range of timescales, or even off-line, revealing particular aspects or subsequent effects of these interactions. Therefore, knowledge obtained from several techniques must be combined to elucidate the underlying processes.

A multi-functional bubble-based microfluidic system

Recently, the bubble-based systems have offered a new paradigm in microfluidics. Gas bubbles are highly flexible, controllable and barely mix with liquids, and thus can be used for the creation of reconfigurable microfluidic systems. In this work, a hydrodynamically actuated bubble-based microfluidic system is introduced. This system enables the precise movement of air bubbles via axillary feeder channels to alter the geometry of the main channel and consequently the flow characteristics of the system. Mixing of neighbouring streams is demonstrated by oscillating the bubble at desired displacements and frequencies. Flow control is achieved by pushing the bubble to partially or fully close the main channel. Patterning of suspended particles is also demonstrated by creating a large bubble along the sidewalls. Rigorous analytical and numerical calculations are presented to describe the operation of the system. The examples presented in this paper highlight the versatility of the developed bubble-based actuator for a variety of applications; thus providing a vision that can be expanded for future highly reconfigurable microfluidics.

A microscopic steam engine implemented in an optical tweezer

The introduction of improved steam engines at the end of the 18th century marked the start of the industrial revolution and the birth of classical thermodynamics. Currently, there is great interest in miniaturizing heat engines, but so far traditional heat engines operating with the expansion and compression of gas have not reached length scales shorter than one millimeter. Here, a micrometer-sized piston steam engine is implemented in an optical tweezer. The piston is a single colloidal microparticle that is driven by explosive vapourization of the surrounding liquid (cavitation bubbles) and by optical forces at a rate between a few tens of Hertz and one kilo-Hertz. The operation of the engine allows to exert impulsive forces with optical tweezers and induce streaming in the liquid, similar to the effect of transducers when driven at acoustic and ultrasound frequencies.

Optofluidic microvalve-on-a-chip with a surface plasmon-enhanced fiber optic microheater

We present an optofluidic microvalve utilizing an embedded, surface plasmon-enhanced fiber optic microheater. The fiber optic microheater is formed by depositing a titanium thin film on the roughened end-face of a silica optical fiber that serves as a waveguide to deliver laser light to the titanium film. The nanoscale roughness at the titanium-silica interface enables strong light absorption enhancement in the titanium film through excitation of localized surface plasmons as well as facilitates bubble nucleation. Our experimental results show that due to the unique design of the fiber optic heater, the threshold laser power required to generate a bubble is greatly reduced and the bubble growth rate is significantly increased. By using the microvalve, stable vapor bubble generation in the microchannel is demonstrated, which does not require complex optical focusing and alignment. The generated vapor bubble is shown to successfully block a liquid flow channel with a size of 125 μm × 125 μm and a flow rate of ∼10 μl/min at ∼120 mW laser power.

Fast temperature measurement following single laser-induced cavitation inside a microfluidic gap

Single transient laser-induced microbubbles have been used in microfluidic chips for fast actuation of the liquid (pumping and mixing), to interact with biological materials (selective cell destruction, membrane permeabilization and rheology) and more recenty for medical diagnosis. However, the expected heating following the collapse of a microbubble (maximum radius ~ 10–35 µm) has not been measured due to insufficient temporal resolution. Here, we extend the limits of non-invasive fluorescence thermometry using high speed video recording at up to 90,000 frames per second to measure the evolution of the spatial temperature profile imaged with a fluorescence microscope. We found that the temperature rises are moderate (< 12.8°C), localized (< 15 µm) and short lived (< 1.3 ms). However, there are significant differences between experiments done in a microfluidic gap and a container unbounded at the top, which are explained by jetting and bubble migration. The results allow to safe-guard some of the current applications involving laser pulses and photothermal bubbles interacting with biological material in different liquid environments.

3D pulsed laser-triggered high-speed microfluidic fluorescence-activated cell sorter

We report a 3D microfluidic pulsed laser-triggered fluorescence-activated cell sorter capable of sorting at a throughput of 23 000 cells per s with 90% purity in high-purity mode and at a throughput of 45 000 cells per s with 45% purity in enrichment mode in one stage and in a single channel. This performance is realized by exciting laser-induced cavitation bubbles in a 3D PDMS microfluidic channel to generate high-speed liquid jets that deflect detected fluorescent cells and particles focused by 3D sheath flows. The ultrafast switching mechanism (20 μs complete on-off cycle), small liquid jet perturbation volume, and three-dimensional sheath flow focusing for accurate timing control of fast (1.5 m s(-1)) passing cells and particles are three critical factors enabling high-purity sorting at high-throughput in this sorter.

Dynamics of an oscillating bubble in a narrow gap

The complex dynamics of a single bubble of a few millimeters in size oscillating inside a narrow fluid-filled gap between two parallel plates is studied using high-speed videography. Two synchronized high-speed cameras were used to observe both the side and front views of the bubble. The front-view images show bubble expansion and collapse with the formation of concentric dark and bright rings. The simultaneous recordings reveal the mechanism behind these rings. The side-view images reveal two different types of collapse behavior of the bubble including a previously unreported collapse phenomenon that is observed as the gap width is changed. At narrow widths, the bubble collapses towards the center of the gap; when the width is increased, the bubble splits before collapsing towards the walls. The bubble dynamics is also observed to be unaffected by the hydrophobic or hydrophilic nature of the plate surface due to the presence of a thin film of liquid between each of the plates and the bubble throughout the bubble lifetime. It is revealed that such systems do not behave as quasi-two-dimensional systems; three-dimensional effects are important.

One-dimensional model of inertial pumping

A one-dimensional model of inertial pumping is introduced and solved. The pump is driven by a high-pressure vapor bubble generated by a microheater positioned asymmetrically in a microchannel. The bubble is approximated as a short-term impulse delivered to the two fluidic columns inside the channel. Fluid dynamics is described by a Newton-like equation with a variable mass, but without the mass derivative term. Because of smaller inertia, the short column refills the channel faster and accumulates a larger mechanical momentum. After bubble collapse the total fluid momentum is nonzero, resulting in a net flow. Two different versions of the model are analyzed in detail, analytically and numerically. In the symmetrical model, the pressure at the channel-reservoir connection plane is assumed constant, whereas in the asymmetrical model it is reduced by a Bernoulli term. For low and intermediate vapor bubble pressures, both models predict the existence of an optimal microheater location. The predicted net flow in the asymmetrical model is smaller by a factor of about 2. For unphysically large vapor pressures, the asymmetrical model predicts saturation of the effect, while in the symmetrical model net flow increases indefinitely. Pumping is reduced by nonzero viscosity, but to a different degree depending on the microheater location.

Exploration of water jet generated by Q-switched laser induced water breakdown with different depths beneath a flat free surface

The dynamics of a water jet on a flat free surface are investigated using a nanosecond pulsed laser for creating an oscillating bubble with different depths beneath the free surface. A thin jet is shown to deform a crater surface resulted from surface depression and cause a circular ring-shaped crater on the connection surface between the crater of surface depression and the thin jet. The collapse of this circular ring-shaped crater is proposed to the crown-like formation around a thick jet. The evolution of the bubble depth suggests a classification of four distinctive ranges of the bubble depths: non-crown formation when the parameter of bubble depth over the maximum bubble radius γ ≤ 0.5, unstable crown formation when 0.5 ≤ γ ≤ 0.6, crown-like structure with a complete crown wall when 0.6 ≤ γ ≤ 1.1, and non-crown formation when 1.1 ≤ γ. Furthermore, the orientation of the crown wall gradually turns counterclockwise to vertical direction with increasing γ from 0.5 to 1.1, implying a high correlation between the orientation of the crown wall and the depth of the bubble. This correlation is explained and discussed by the directional change of the jet eruption from the collapse of circular ring-shaped crater.

Energy partition at the collapse of spherical cavitation bubbles

Spherically collapsing cavitation bubbles produce a shock wave followed by a rebound bubble. Here we present a systematic investigation of the energy partition between the rebound and the shock. Highly spherical cavitation bubbles are produced in microgravity, which suppresses the buoyant pressure gradient that otherwise deteriorates the sphericity of the bubbles. We measure the radius of the rebound bubble and estimate the shock energy as a function of the initial bubble radius (2-5.6mm) and the liquid pressure (10-80kPa). Those measurements uncover a systematic pressure dependence of the energy partition between rebound and shock. We demonstrate that these observations agree with a physical model relying on a first-order approximation of the liquid compressibility and an adiabatic treatment of the noncondensable gas inside the bubble. Using this model we find that the energy partition between rebound and shock is dictated by a single nondimensional parameter ξ=Δpγ6/[p(g0)1/γ(ρc2)1-1/γ], where Δp=p∞ - pv is the driving pressure, p∞ is the static pressure in the liquid, pv is the vapor pressure, pg0 is the pressure of the noncondensable gas at the maximal bubble radius, γ is the adiabatic index of the noncondensable gas, ρ is the liquid density, and c is the speed of sound in the liquid.

Scanning laser pulses driven microfluidic peristaltic membrane pump

We reported a pulsed laser driven peristaltic pump for driving fluid in multilayer polydimethylsiloxane (PDMS) microchannels. By synchronizing the dynamics of deforming membrane valves with pulsed laser generated bubbles, a maximum pumping rate of 460 pl s(-1) has been achieved.

Universal scaling law for jets of collapsing bubbles

Cavitation bubbles collapsing and rebounding in a pressure gradient ∇p form a "microjet" enveloped by a "vapor jet." This Letter presents unprecedented observations of the vapor jets formed in a uniform gravity-induced ∇p, modulated aboard parabolic flights. The data uncover that the normalized jet volume is independent of the liquid density and viscosity and proportional to ζ ≡ |∇p|R(0)/Δp, where R(0) the maximal bubble radius and Δp is the driving pressure. A derivation inspired by "Kelvin-Blake" considerations confirms this law and reveals its negligible dependence of surface tension. We further conjecture that the jet only pierces the bubble boundary if ζ ≳ 4 × 10(-4).

Laser-induced thermal bubbles for microfluidic applications

We present a unique bubble generation technique in microfluidic chips using continuous-wave laser-induced heat and demonstrate its application by creating micro-valves and micro-pumps. In this work, efficient generation of thermal bubbles of controllable sizes has been achieved using different geometries of chromium pads immersed in various types of fluid. Effective blocking of microfluidic channels (cross-section 500 × 40 μm(2)) and direct pumping of fluid at a flow rate of 7.2-28.8 μl h(-1) with selectable direction have also been demonstrated. A particular advantage of this technique is that it allows the generation of bubbles at almost any location in the microchannel and thus enables microfluidic control at any point of interest. It can be readily integrated into lab-on-a-chip systems to improve functionality.

High-speed droplet generation on demand driven by pulse laser-induced cavitation

We report on a pulse laser-driven droplet generation (PLDG) mechanism that enables on-demand droplet generation at rates up to 10,000 droplets per second in a single-layer PDMS-based microfluidic device. Injected droplet volumes can be continuously tuned between 1 pL and 150 pL with less than 1% volume variation.

Characterizing bubble dynamics created by high-intensity focused ultrasound for the delivery of antibacterial nanoparticles into a dental hard tissue

Hig hintensity focused ultrasound (HIFU) has been applied for drug delivery in various disease conditions. Delivery of antibacterial-nanoparticles into dental hard tissues may open up new avenues in the treatment of dental infections. However, the basic mechanism of bubble dynamics, its characterization, and working parameters for effective delivery of nanoparticles, warrants further understanding. This study was conducted to highlight the basic concept of HIFU and the associated bubble dynamics for the delivery of nanoparticles. Characterization experiments to deliver micro-scale particles into simulated tubular channels, activity of ultrasonic bubbles, and pressure measurement inside the HIFU system were conducted. Subsequently, experiments were carried out to test the ability of HIFU to deliver nanoparticles into human dentine using field emission scanning electron micrographs (FESEM) and elemental dispersive X-ray analysis (EDX). The characterization experiments showed that the bubbles collapsing at the opening of tubular channels were able to propel particles along their whole length. The pressure measured showed sufficient negative and positive pressure suggesting that the bubble grew to a certain size before collapsing, thus enabling the particles to be pushed. The FESEM and EDX analysis highlighted the ability of HIFU to deliver nanoparticles deep within the dentinal tubules. This study highlighted the characteristics and the mechanism involved of the bubbles generated by the HIFU and their capability to deliver nanoparticles.

Creation of cavitation activity in a microfluidic device through acoustically driven capillary waves

We present a study on achieving intense acoustic cavitation generated by ultrasonic vibrations in polydimethylsiloxane (PDMS) based microfluidic devices. The substrate to which the PDMS is bonded was forced into oscillation with a simple piezoelectric transducer attached at 5 mm from the device to a microscopic glass slide. The transducer was operated at 100 kHz with driving voltages ranging between 20 V and 230 V. Close to the glass surface, pressure and vibration amplitudes of up to 20 bar and 400 nm were measured respectively. It is found that this strong forcing leads to the excitation of nonlinear surface waves when gas-liquid interfaces are present in the microfluidic channels. Also, it is observed that nuclei leading to intense inertial cavitation are generated by the entrapment of gas pockets at those interfaces. Subsequently, cavitation bubble clusters with void fractions of more than 50% are recorded with high-speed photography at up to 250,000 frames/s. The cavitation clusters can be sustained through the continuous injection of gas using a T-junction in the microfluidic device.

A boundary element model of the transport of a semi-infinite bubble through a microvessel bifurcation

Motivated by a developmental gas embolotherapy technique for selective occlusion of blood flow to tumors, we examined the transport of a pressure-driven semi-infinite bubble through a liquid-filled bifurcating channel. Homogeneity of bubble splitting as the bubble passes through a vessel bifurcation affects the degree to which the vascular network near the tumor can be uniformly occluded. The homogeneity of bubble splitting was found to increase with bubble driving pressure and to decrease with increased bifurcation angle. Viscous losses at the bifurcation were observed to affect the bubble speed significantly. The potential for oscillating bubble interfaces to induce flow recirculation and impart high stresses on the vessel endothelium was also observed.

Nonspherical laser-induced cavitation bubbles

The generation of arbitrarily shaped nonspherical laser-induced cavitation bubbles is demonstrated with a optical technique. The nonspherical bubbles are formed using laser intensity patterns shaped by a spatial light modulator using linear absorption inside a liquid gap with a thickness of 40 microm. In particular we demonstrate the dynamics of elliptic, toroidal, square, and V-shaped bubbles. The bubble dynamics is recorded with a high-speed camera at framing rates of up to 300,000 frames per second. The observed bubble evolution is compared to predictions from an axisymmetric boundary element simulation which provides good qualitative agreement. Interesting dynamic features that are observed in both the experiment and simulation include the inversion of the major and minor axis for elliptical bubbles, the rotation of the shape for square bubbles, and the formation of a unidirectional jet for V-shaped bubbles. Further we demonstrate that specific bubble shapes can either be formed directly through the intensity distribution of a single laser focus, or indirectly using secondary bubbles that either confine the central bubble or coalesce with the main bubble. The former approach provides the ability to generate in principle any complex bubble geometry.

Delivery of antibacterial nanoparticles into dentinal tubules using high-intensity focused ultrasound

INTRODUCTION

High-intensity focused ultrasound (HIFU) produces collapsing cavitation bubbles. This study aims to investigate the efficacy of collapsing cavitation bubbles to deliver antibacterial nanoparticles into dentinal tubules to improve root canal disinfection.

METHODS

In stage 1, experiments were performed to characterize the efficacy of collapsing cavitation bubbles to deliver the miniature plaster beads into a tubular channel model. In stage 2, experiments were conducted on root-dentin blocks to test the efficacy of HIFU applied at 27 kHz for 2 minutes to deliver antibacterial nanoparticles into dentinal tubules. After the stage 2 experiment, the samples were sectioned and analyzed using field-emission scanning electron microscopy and energy dispersive X-ray analysis.

RESULTS

The stage 1 experiment showed that collapsing cavitation bubbles using HIFU delivered plaster beads along the entire length of the tubular channel. It was observed from the stage 2 experiments that the diffusion of fluids alone was not able to deliver antibacterial nanoparticles into dentinal tubules. The collapsing cavitation bubbles treatment using HIFU resulted in significant penetration up to 1,000 microm of antibacterial nanoparticles into the dentinal tubules. The statistical analysis showed a highly significant difference in the depth of penetration of antibacterial nanoparticles between the two groups (<0.005).

CONCLUSION

The cavitation bubbles produced using HIFU can be used as a potential method to deliver antibacterial nanoparticles into the dentinal tubules to enhance root canal disinfection.

Cavitation bubble dynamics in microfluidic gaps of variable height

We study experimentally the dynamics of laser-induced cavitation bubbles created inside a narrow gap. The gap height, h , is varied from 15 to 400 microm and the resulting bubble dynamics is compared to a semiunbounded fluid. The cavitation bubbles are created with pulsed laser light at constant laser energy and are imaged with a high-speed camera. The bubble lifetime increases with decreasing gap height by up to 50% whereas the maximum projected bubble radius remains constant. Comparing the radial dynamics to potential flow models, we find that with smaller gaps, the bubble-induced flow becomes essentially planar, thus slower flows with reduced shear. These findings might have important consequences for microfluidic applications where it is desirable to tune the strength and range of the interactions such as in the case of cell lysis and cell membrane poration.