Physical visualization and squalene-based scanning electrochemical microscopy imaging of latent fingerprints on PVDF membrane

Fingerprints have long been the gold standard for personal identification in forensic science. However, realizing the high-resolution enhancement of eccrine LFPs is difficult using the traditional methods and the label-free detection of fingerprint residue information is also challenging. Herein, we propose two enhancement strategies for LFPs on PVDF membrane (LFPs/PVDF) using blue-black ink staining and scanning electrochemical microscopy (SECM). The blue-black ink staining method was used for the first time to develop three types (sebaceous, natural and eccrine) of LFPs/PVDF based on the difference in wettability between the fingerprint residues and PVDF membrane. The enhanced fingerprints clearly displayed levels 1-3 features with high contrast and low background interference. Furthermore, we achieved chemical imaging of the LFP/PVDF samples, where their possible visualization mechanisms were ascribed to the electrochemical reactivity of squalene and difference in wettability between the LFP and PVDF membrane, which was first proposed and investigated by SECM imaging and water contact angle (WCA) measurements, respectively. Significantly, SECM imaging not only provided fingerprint patterns without any labelling but also revealed the spatial distribution information of squalene in LFPs simultaneously. In addition, it was also demonstrated that LFPs deposited on various surfaces were first successfully transferred to the PVDF membrane, and then further developed with both methods, making them general for personal identity-related applications. Taken together, the blue-black ink staining method can easily and quickly obtain level 3 features of LFPs/PVDF and the SECM approach can non-invasively image the topography and chemical information of LFPs/PVDF, and thus they can be potentially selected according to various requirements in forensic scenarios.

Full-color Persistent Room-temperature Phosphorescence from Carbon Dot Composites Based on a Single Nonaromatic Carbon Source

Herein, a series of carbon dot composites (CDC) with full-color and long-lived room-temperature phosphorescence (RTP) are prepared by a simple solid-phase one-step method from a single non-conjugated and non-aromatic carbon source. The RTP emission wavelength can be adjusted from 462 to 623 nm by changing the feeding ratio and reaction temperature. The luminescent lifetime and quantum yield of a green emissive CDC (AB-CDC-3) reach 1.1 s and 39%, respectively, because of the close interaction between carbon dots and inorganic matrix. Due to the existence of multiple luminescent centers, these CDC exhibit excitation wavelength-dependent RTP and a white emission when excited at a specific wavelength. A single-component afterglow luminescent diode based on AB-CDC-4 shows a high-quality white emission with CIE of (0.30, 0.33) and color-rendering index of 88. Based on the unique photophysical properties of the composites, they exhibit huge application potential in the field of multilevel anti-counterfeiting, fingerprint identification, and optoelectronic devices.

AI-Assisted Fusion of Scanning Electrochemical Microscopy Images Using Novel Soft Probe

Scanning electrochemical microscopy (SECM) is one of the scanning probe techniques that has attracted considerable attention because of its ability to interrogate surface morphology or electrochemical reactivity. However, the quality of SECM images generally depends on the sizes of the electrodes and many uncontrollable factors. Furthermore, manipulating fragile glass ultramicroelectrodes and blurred images sometimes frustrate researchers. To overcome the challenges of modern SECM, we developed novel soft gold probes and then established the AI-assisted methodology for image fusion. A novel gold microelectrode probe with high softness was developed to scan fragile samples. The distribution of EGFR (protein biomarker) in oral cancer was investigated. Then, we fused the optical microscopic and SECM images to enhance the image quality using Matlab software. However, thousands of fused images were generated by changing the parameters for image fusion, which is annoying for researchers. Thus, a deep learning model was built to select the best-fused images according to the contrast and clarity of the fused images. Therefore, the quality of the SECM images was improved using a novel soft probe and combining the image fusion technique. In the future, a new scanning probe with AI-assisted fused SECM image processing may be interpreted more preciously and contribute to the early detection of cancers.

Flexible Disk Ultramicroelectrode for High-Resolution and Substrate-Tolerable Scanning Electrochemical Microscopy Imaging

A simple and universal strategy for fabricating flexible 25 μm platinum (Pt) disk ultramicroelectrodes (UMEs) was proposed, where a pulled borosilicate glass micropipette acted as a mold for shaping the flexible tip with flexible epoxy resin. The whole preparation procedure was highly efficient, enabling 10 or more probes to be manually fabricated within 10 h. Intriguingly, this technique permits an adjustable RG ratio, tip length, and stiffness, which could be tuned according to varying experimental demands. Besides, the electroactive area of the probe could be exposed and made renewable with a thin blade, allowing its reuse in multiple experiments. The flexibility characterization was then employed to optimize the resin/hardener mass ratio of epoxy resin and the tip position during HF etching in the fabrication process, suggesting that more hardener, a larger RG value, or a longer tip length obtained stronger deformation resistance. Subsequently, the as-prepared probe was examined by optical microscopy, cyclic voltammetry, and SECM approach curves. The results demonstrated the probe possessed good geometry with a small RG ratio of less than 3 and exceptional electrochemical properties, and its insulating sheath remained undeformed after blade cutting. Owing to the tip's flexibility, it could be operated in contactless mode with an extremely low working distance and even in contact mode scanning to achieve high spatial resolution and high sensitivity while guaranteeing that the tip and samples would suffer minimal damage if the tip crashed. Finally, the flexible probe was successfully employed in three scanning scenarios where tilted and 3D structured PDMS microchips, a latent fingerprint deposited on the stiff copper sheet, and soft egg white were included. In all, the flexible probe encompasses the advantages of traditional disk UMEs and circumvents their principal drawbacks of tip crash and causing sample scratches, which is thus more compatible with large specimens of 3D structured, stiff, or even soft topography.

Recent Advances in Excimer-Based Fluorescence Probes for Biological Applications

The fluorescent probe is a powerful tool for biological sensing and optical imaging, which can directly display analytes at the molecular level. It provides not only direct visualization of biological structures and processes, but also the capability of drug delivery systems regarding the target therapy. Conventional fluorescent probes are mainly based on monomer emission which has two distinguishing shortcomings in practice: small Stokes shifts and short lifetimes. Compared with monomer-based emission, excimer-based fluorescent probes have large Stokes shifts and long lifetimes which benefit biological applications. Recent progress in excimer-based fluorescent sensors (organic small molecules only) for biological applications are highlighted in this review, including materials and mechanisms as well as their representative applications. The progress suggests that excimer-based fluorescent probes have advantages and potential for bioanalytical applications.

Preparation of Novel Magnetic Nanomaterials Based on "Facile Coprecipitation" for Developing Latent Fingerprints (LFP) in Crime Scenes

Recently, the application of novel nanomaterials, especially magnetic nanomaterials in the development of latent fingerprints (LFP), has become the hot focus for forensic scientists and criminal investigators. As a type of recyclable, environment-friendly material, Fe₃O₄ nanoparticles achieve a wonderful effect in visualization of LFP. We first report the synthesis and encapsulation of nano-Fe₃O₄ through "facile coprecipitation", (3-mercaptopropyl)triethoxysilane was covalently embedded into Fe₃O₄ nanoparticles, and the Fe₃O₄ core was encapsulated by the nanosilver to prepare novel magnetic nanomaterials (P-MNP@Ag) with the core-shell configuration. For comparison, the magnetic nanomaterials (S-MNP@Ag) were prepared by surface modification. Their composition, structure, and properties were characterized by SEM, TEM, XRD, IR, XPS, and VSM. Compared with commercially available gold powder, silver powder, bare magnetic powder, and prepared S-MNP@Ag, the development effect of LFP on different objects by using P-MNP@Ag had better performance, which presented the advantages of low background interference, high sensitivity, and clear secondary details in LFP. In the crime scenes of some influential cases, P-MNP@Ag had been applied to the visualization of LFP. The biometric identification of criminal suspects was confirmed through fingerprint comparison, which was highly affirmed by the public security department.

Applications of Carbon Dots (CDs) in Latent Fingerprints Imaging

Carbon dots (CDs), a new member of the carbon-based material family, possess unique properties, such as high fluorescence, non-toxicity, eco-friendliness, stability and cost-effectiveness. These properties helped CDs to receive tremendous attention in various fields, namely, biological, opto-electronic, bio-imaging and energy-related applications. Although CDs are widely explored in bio-imaging and bio-sensing applications, their effectiveness in forensic science and technology is comparatively new. In this review, applications of CDs pertaining to latent FPs recovery since 2015 to 2020 is summarized comprehensively.

Advances in fingermark age determination techniques

Fingermarks have long been recognized as one of the most reliable and valuable evidence for personal identification. In practice, fingerprint analysis primarily concentrates on latent fingerprint visualization. However, fingerprint visualization techniques do not always enable individualization when fingermarks collected in crime scenes are fragmentary, ambiguous, or deformed. Age determination techniques based on physical and chemical composition changes in fingerprints over time have attracted researchers' attention in recent years. Nevertheless, the components of fingerprints are liable to factors including donor features, deposition conditions, substrate properties, environmental conditions and revealing methods. All the influences mainly contribute to unreliable outcomes of age estimation. Recent developments in fingermark age determination have moved forward to more precise approaches. The advanced methods can be classified into two categories including techniques based on the modifications of physical characteristics and chemical composition characteristics. Herein, the review includes the five types of variables that influence the aging process. The methodologies are subsequently highlighted along with their advantages and disadvantages. Furthermore, photography, optical, microscopy and electrochemical methods, and vibrational spectroscopy and mass spectrometry (MS) techniques are summarized in detail, with an emphasis on their utilization.

Recent advances in the chemical imaging of human fingermarks (a review)

This review highlights the considerable advances in the chemical imaging of human fingermarks that provide more chemical information, including numerous endogenous and exogenous constituents. Despite remarkable development in DNA analysis and recognition, human fingermark analysis remains one of the priority approaches available for obtaining reliable forensic evidence. Additional information about the donor can be obtained from the chemical composition of latent fingermarks in addition to the ridge pattern, such as the age, gender, medical history, and possible drug habits. The analytical approaches reviewed here include spectroscopy, mass spectrometry, immuno-labelling and electrochemical methods. Each method has different capabilities with respect to sensitivity, reproducibility, selectivity, reliability and ultimately applicability, either for use in routine forensic practice or in academic research work. The advantages of spectroscopic techniques, including infrared, Raman and micro-X-ray fluorescence spectroscopy, are the capabilities of a rapid and non-destructive imaging of fingermarks by providing spectral information on chemical composition. In addition, mass spectrometry imaging can provide spatially specific information on fingermark chemical composition. Recently, the use of immuno-labelling in latent fingermark detection has attracted significant attention because it can overcome the sensitivity and selectivity problems experienced with other existing methods. The electrochemical method has also been employed to image latent fingermarks by measuring the electric current changes with the spatial chemical composition from the ridges and valleys at high resolution to provide a third level of detail, which is especially useful for multicoloured background surfaces or for surfaces contaminated with blood or other bodily fluids.

Covalent Organic Polymers for Rapid Fluorescence Imaging of Latent Fingerprints

Rapid, simple and highly sensitive identification of latent fingerprints (LFPs) is an important issue related to national security and recognition of potential crimes. Here, we synthesize a series of covalent organic polymers (COPs) with colorful fluorescence (from blue to green, pale yellow, bright yellow, and red) and further investigate their performance for fluorescence imaging of LFPs. Results indicate that the COP materials can be used as fluorescence probes to rapidly visualize the precision substructure of LFPs within 5 s by simply spraying method, and tunable fluorescent color makes the COP probes have a high contrast and low interference for fluorescence imaging of LFPs on different substrates (including glass slides, paper, aluminum foil, plastic, ironware) in different backgrounds. We also further reveal the mechanism of COP probes for fluorescence imaging of LFPs. Importantly, the COP probes show high stability and could successfully achieve the fluorescence imaging for LFPs after aged for 45 days or washed by water. In short, this is the first report on the porous polymers for fluorescence imaging of LFPs and expected that it can be also applied to the fluorescence imaging of other fields.

Plastic fingerprint replica: solvent-assisted 3D molding and motion-promoted nano-spherulite formation

Fingerprinting is an essential form of identification for both biometric security and forensics today. Herein, we describe the procedure and principle of creating highly resolved, chemically robust, 3D fingerprint physical replicas, which is based on the solvent-assisted molding of transparent plastics and motion-promoted growth of semi-crystalline polymeric nanostructures. Prior to fingerprinting atop, polycarbonate, a commercial polymer with excellent durability and optical transparency, is first swelled and softened with a mild solvent (acetone). The molding motion conforms polymer chains between fingerprint ridges, which facilitates the formation of semi-crystalline spherulites and results in greater opacity between ridges than underneath ridges. Besides being more enduring than digital scanning and ink printed counterparts, the plastic fingerprint replicas can provide additional morphological information (depth of the ridge) and high-level details (distribution of sweat pores).

Candle Soot Coating for Latent Fingermark Enhancement on Various Surfaces

We demonstrate a facile method termed candle soot coating (CSC) for fast developing latent fingermarks (LFMs) on various kinds of surfaces (glass, ceramic, metal, paper and adhesive tape). The CSC method can be considered as simple, fast, and low-cost as well as providing high contrast for LFM visualization in potential forensic applications.

Hydrochromic Approaches to Mapping Human Sweat Pores

Hydrochromic materials, which undergo changes in their light absorption and/or emission properties in response to water, have been extensively investigated as humidity sensors. Recent advances in the design of these materials have led to novel applications, including monitoring the water content of organic solvents, water-jet-based rewritable printing on paper, and hydrochromic mapping of human sweat pores. Our interest in this area has focused on the design of hydrochromic materials for human sweat pore mapping. We recognized that materials appropriate for this purpose must have balanced sensitivities to water. Specifically, while they should not undergo light absorption and/or emission transitions under ambient moisture conditions, the materials must have sufficiently high hydrochromic sensitivities that they display responses to water secreted from human sweat pores. In this Account, we describe investigations that we have carried out to develop hydrochromic substances that are suitable for human sweat pore mapping. Polydiacetylenes (PDAs) have been extensively investigated as sensor matrices because of their stimulus-responsive color change property. We found that incorporation of headgroups composed of hygroscopic ions such as cesium or rubidium and carboxylate counterions enables PDAs to undergo a blue-to-red colorimetric transition as well as a fluorescence turn-on response to water. Very intriguingly, the small quantities of water secreted from human sweat pores were found to be sufficient to trigger fluorescence turn-on responses of the hydrochromic PDAs, allowing precise mapping of human sweat pores. Since the hygroscopic ion-containing PDAs developed in the initial stage display a colorimetric transition under ambient conditions that exist during humid summer periods, a new system was designed. A PDA containing an imidazolium ion was found to be stable under all ambient conditions and showed temperature-dependent hydrochromism corresponding to a colorimetric change near body temperature. This feature enables the use of this technique to generate high-quality images of sweat pores. This Account also focuses on the results of the most recent phase of this investigation, which led to the development of a simple yet efficient and reliable technique for sweat pore mapping. The method utilizes a hydrophilic polymer composite film containing fluorescein, a commercially available dye that undergoes a fluorometric response as a result of water-dependent interconversion between its ring-closed spirolactone (nonfluorescent) and ring-opened fluorone (fluorescent) forms. Surface-modified carbon nanodots (CDs) have also been found to be efficient for hydrochromic mapping of human sweat pores. The results discovered by Lou et al. [ Adv. Mater. 2015 , 27 , 1389 ] are also included in this Account. Sweat pore maps obtained from fingertips using these materials were found to be useful for fingerprint analysis. In addition, this hydrochromism-based approach is sufficiently sensitive to enable differentiation between sweat-secreting active pores and inactive pores. As a result, the techniques can be applied to clinical diagnosis of malfunctioning sweat pores. The directions that future research in this area will follow are also discussed.

Screening and mapping of pigments in paintings using scanning electrochemical microscopy (SECM)

The use of the scanning electrochemical microscopy (SECM) technique for identifying and mapping of both organic and inorganic pigments in sub-microsamples from pictorial specimens is described.

Scanning electrochemical microscopy for study of aptamer-thrombin interfacial interactions on gold disk microelectrodes

A feasibility for the determination of thrombin on gold disk microelectrodes (GDMs) using scanning electrochemical microscopy (SECM) is reported. The assembly process step-by-step of thrombin aptasensor on GDMs is monitored by SECM. SECM analysis reveals the immobilization of thrombin aptamers on GDMs. The interaction between thrombin aptamers and thrombin on GDMs is imaged by SECM with feedback mode using ferrocenemethanol as an electrochemical mediator. The formation of thrombin/thrombin aptamer complex on GDMs results in a decrease in the tip peak current on spatial SECM images. This method is able to linearly and selectively detect thrombin over a linear range from 10(-12) to 10(-5)M with a detection limit of 6.07 fM.

Nanoplasmonic imaging of latent fingerprints and identification of cocaine

Search for traces: Aptamer-bound Au nanoparticles (Au NPs) were used to provide high-resolution dark-field microscopy images of latent fingerprints (LFPs) with level 2 and level 3 details. Furthermore, the cocaine-induced aggregation of Au NPs results in a true green-to-red color change of the scattered light, providing a quasi-quantative method to identify cocaine loadings in LFPs.

Multiplex mass spectrometry imaging for latent fingerprints

We have previously developed in-parallel data acquisition of orbitrap mass spectrometry (MS) and ion trap MS and/or MS/MS scans for matrix-assisted laser desorption/ionization MS imaging (MSI) to obtain rich chemical information in less data acquisition time. In the present study, we demonstrate a novel application of this multiplex MSI methodology for latent fingerprints. In a single imaging experiment, we could obtain chemical images of various endogenous and exogenous compounds, along with simultaneous MS/MS images of a few selected compounds. This work confirms the usefulness of multiplex MSI to explore chemical markers when the sample specimen is very limited.

Detection of protein deposition within latent fingerprints by surface-enhanced Raman spectroscopy imaging

The detection of metabolites is very important for the estimation of the health of human beings. Latent fingerprint contains many constituents and specific contaminants, which give much information of the individual, such as health status, drug abuse etc. For a long time, many efforts have been focused on visualizing latent fingerprints, but little attention has been paid to the detection of such substances at the same time. In this article, we have devised a versatile approach for the ultra-sensitive detection and identification of specific biomolecules deposited within fingerprints via a large-area SERS imaging technique. The antibody bound to the Raman probe modified silver nanoparticles enables the binding to specific proteins within the fingerprints to afford high-definition SERS images of the fingerprint pattern. The SERS spectra and images of Raman probes indirectly provide chemical information regarding the given proteins. By taking advantage of the high sensitivity and the capability of SERS technique to obtain abundant vibrational signatures of biomolecules, we have successfully detected minute quantities of protein present within a latent fingerprint. This technique provides a versatile and effective model to detect biomarkers within fingerprints for medical diagnostics, criminal investigation and other fields.