Understanding the Adsorption Kinetics of Acetone in Humid Activated Carbons: Perspectives from Adsorption-Breakthrough Experiments and Molecular Simulations

The presence of water vapor influences the adsorption equilibrium and kinetics of volatile organic compounds (VOCs) in porous materials. By combination of breakthrough experiments and molecular simulations, the competitive adsorption mechanisms of water vapor and acetone on activated carbon with different textures and surface chemical properties at different humidity levels were investigated. Adsorption capacity decreases with increasing relative humidity owing to the formation of preferential adsorption sites between water and the activated carbon surface, while the adsorption rate initially increases and then decreases with increasing relative humidity. Experimental and simulation results revealed that the existence of a small amount of water changed the pore size distributions of activated carbon, thereby promoting the diffusion of acetone molecules. As the relative humidity increased, a portion of the acetone dissolved in water, resulting in a reduction in the adsorption rate. The response of different functional groups to relative humidity was further clarified by molecular simulation. Activated carbons with a high electrostatic interaction with acetone were less affected by humidity and thus exhibit greater potential as adsorbents.

Simulation study on functional group-modified Ni-MOF-74 for CH4/N2 adsorption separation

This study employs grand canonical Monte Carlo (GCMC) simulations to investigate the impact of functional group modifications (CH3, OH, NH2, and OLi) on the adsorption performance of CH4/N2 on Ni-MOF-74. The results revealed that functional group modifications significantly increased the adsorption capacity of Ni-MOF-74 for both CH4 and N2. The packed methyl groups in CH3-Ni-MOF-74 create an environment conducive to CH4, leading to the highest CH4 adsorption capacity. The electrostatic potential distribution indicates that the strong electron-donating effect introduced by the alkali metal Li results in the highest electrostatic potential gradient in Li-O-Ni-MOF-74, leading to the strongest adsorption of N2, this is unfavorable for CH4/N2 separation. At 1500 kPa the selectivity order of adsorbents for mixed gases was as follows: CH3-Ni-MOF-74 > NH2-Ni-MOF-74 > OH-Ni-MOF-74 > Ni-MOF-74 > Li-O-Ni-MOF-74. This study highlights that CH3-Ni-MOF-74 possesses optimal CH4 selectivity and adsorption performance. Given the current lack of research on functionalized MOF-74 for the separation of CH4 and N2, the findings of this study will serve as a theoretical guide and provide references for the applications of CH4 adsorption and CH4/N2 separation.

Advanced strategies in Metal-Organic Frameworks for CO2 Capture and Separation

The continuous carbon dioxide (CO₂ ) gas emissions associated with fossil fuel production, valorization, and utilization are serious challenges to the global environment. Therefore, several developments of CO₂ capture, separation, transportation, storage, and valorization have been explored. Consequently, we documented a comprehensive review of the most advanced strategies adopted in metal-organic frameworks (MOFs) for CO₂ capture and separation. The enhancements in CO₂ capture and separation are generally achieved due to the chemistry of MOFs by controlling pore window, pore size, open-metal sites, acidity, chemical doping, post or pre-synthetic modifications. The chemistry of defects engineering, breathing in MOFs, functionalization in MOFs, hydrophobicity, and topology are the salient advanced strategies, recently reported in MOFs for CO₂ capture and separation. Therefore, this review summarizes MOF materials' advancement explaining different strategies and their role in the CO₂ mitigations. The study also provided useful insights into key areas for further investigations.

Radiation-initiated high strength chitosan/lithium sulfonate double network hydrogel/aerogel with porosity and stability for efficient CO2 capture

Developing efficient and inexpensive CO₂ capture technologies is a significant way to reduce carbon emissions. In this work, a novel chitosan/lithium sulfonate double network high strength hydrogel is synthesized by electron beam radiation. Due to the electron beam having a wide radiation area and certain penetrating power, the free radical polymerization can be initiated more uniformly and quickly in the hydrogel. The network structure of the hydrogel prepared by radiation-initiated polymerization is more uniform than that prepared by conventional chemical initiator-initiated polymerization. Meanwhile, the introduction of the second network to construct the double network structure does not reduce the surface area of the aerogel, which is different from the conventional method of grafting or impregnation modified porous materials. Moreover, the synthesized aerogels have good physical and chemical stability. The freeze-dried aerogels possess a porous structure and CO₂ capture ability due to the CO₂-philic double network structure. Because of the inexpensive raw material and convenient radiation process, this work can reduce the cost of CO₂ adsorbents and has prospects of application in the field of CO₂ solid adsorbents.

Chitosan hydrogel is regenerated from alkali/urea aqueous solution and the lithium sulfonate second network is introduced by electron beam radiation-initiated in situ free radical polymerization. The freeze-dried aerogel has CO₂ capture capacity.

Augmenting the Carbon Dioxide Uptake and Selectivity of Metal-Organic Frameworks by Metal Substitution: Molecular Simulations of LMOF-202

Metal organic frameworks (MOFs) are promising porous materials for the adsorption of CO_2. Here, we report the study of a luminescent MOF (LMOF), called LMOF-202. We have employed Grand Canonical Monte Carlo (GCMC) simulations to understand and explain the adsorption phenomena inside LMOF-202, and based on the phenomena happening at the molecular level, we have varied the metal ions in LMOF-202 to increase the CO₂ affinity and selectivity of the material. We show that the CO₂ adsorption capacity and selectivity can be increased by approximately 1.5 times at 1 bar and 298 K by changing the metal ion from Zn to Ba. We also report the feasibility of using this material to capture CO₂ from flue gas under realistic conditions (1 bar and 298 K). This work shows that LMOF-202 merits further consideration as a carbon capture adsorbent.

Catalytic Space Engineering of Porphyrin Metal-Organic Frameworks for Combined CO2 Capture and Conversion at a Low Concentration

Porous porphyrin metal-organic frameworks (PMOFs) provide promising platforms for studying CO₂ capture and conversion (C3) owing to their versatility in photoelectric, catalytic, and redox activities and porphyrin coordination chemistry. Herein, we report the C3 application of two PMOFs by engineering the coordination space through the introduction of two catalytic metalloporphyrins doped with rhodium or iridium, Rh-PMOF-1 and Ir-PMOF-1, both of which can serve as heterogeneous catalysts for the chemical fixation of CO₂ into cyclic carbonates with yields of up to 99 %. Remarkably, the catalytic reactions can effectively proceed under low CO₂ concentrations and high yields of 83 % and 73 % can be obtained under 5 % CO₂ in the presence of Rh-PMOF-1 and Ir-PMOF-1, respectively. The synergistic effect of the metalloporphyrin ligand and the Zr₆ O₈ cluster, in combination with the CO₂ concentration effect from the pore space, might account for the excellent catalytic performance of Rh-PMOF-1 under low CO₂ concentration. Recycling tests of Rh-PMOF-1 show negligible loss of catalytic activity after 10 runs.

A simple and novel protocol for Li-trapping with a POM/MOF nano-composite as a new adsorbent for CO2 uptake

A novel recipe for lithium trapping over a POM/MOF hybrid composite to enhance carbon capture is presented

Lithium doping on 2D squaraine-bridged covalent organic polymers for enhancing adsorption properties: a theoretical study

A Li-modified squaraine-involved 2D COF material exhibits enhanced CO₂ adsorption and separation properties.

Porous Carbon Materials Based on Graphdiyne Basis Units by the Incorporation of the Functional Groups and Li Atoms for Superior CO2 Capture and Sequestration

The graphdiyne family has attracted a high degree of concern because of its intriguing and promising properties. However, graphdiyne materials reported to date represent only a tiny fraction of the possible combinations. In this work, we demonstrate a computational approach to generate a series of conceivable graphdiyne-based frameworks (GDY-Rs and Li@GDY-Rs) by introducing a variety of functional groups (R = -NH₂, -OH, -COOH, and -F) and doping metal (Li) in the molecular building blocks of graphdiyne without restriction of experimental conditions and rapidly screen the best candidates for the application of CO₂ capture and sequestration (CCS). The pore topology and morphology and CO₂ adsorption and separation properties of these frameworks are systematically investigated by combining density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. On the basis of our computer simulations, combining Li-doping and hydroxyl groups strategies offer an unexpected synergistic effect for efficient CO₂ capture with an extremely CO₂ uptake of 4.83 mmol/g at 298 K and 1 bar. Combined with its superior selectivity (13 at 298 K and 1 bar) for CO₂ over CH₄, Li@GDY-OH is verified to be one of the most promising materials for CO₂ capture and separation.

Competitive adsorption of a binary CO2-CH4 mixture in nanoporous carbons: effects of edge-functionalization

The effect of edge-functionalization on the competitive adsorption of a binary CO2-CH4 mixture in nanoporous carbons (NPCs) has been investigated for the first time by combining density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulation. Our results show that edge-functionalization has a more positive effect on the single-component adsorption of CO2 than CH4, therefore significantly enhancing the selectivity of CO2 over CH4, in the order of NH2-NPC > COOH-NPC > OH-NPC > H-NPC > NPC at low pressure. The enhanced adsorption originates essentially from the effects of (1) the conducive environment with a large pore size and an effective accessible surface area, (2) the high electronegativity/electropositivity, (3) the strong adsorption energy, and (4) the large electrostatic contribution, due to the inductive effect/direct interaction of the embedded edge-functionalized groups. The larger difference from these effects results in the higher competitive adsorption advantage of CO2 in the binary CO2-CH4 mixture. Temperature has a negative effect on the gas adsorption, but no obvious influence on the electrostatic contribution on selectivity. With the increase of pressure, the selectivity of CO2 over CH4 first decreases sharply and subsequently flattens out to a constant value. This work highlights the potential of edge-functionalized NPCs in competitive adsorption, capture, and separation for the binary CO2-CH4 mixture, and provides an effective and superior alternative strategy in the design and screening of adsorbent materials for carbon capture and storage.

Synergetic effect of carbon nanopore size and surface oxidation on CO2 capture from CO2/CH4 mixtures

We have studied the synergetic effect of confinement (carbon nanopore size) and surface chemistry (the number of carbonyl groups) on CO2 capture from its mixtures with CH4 at typical operating conditions for industrial adsorptive separation (298 K and compressed CO2-CH4 mixtures). Although both confinement and surface oxidation have an impact on the efficiency of CO2/CH4 adsorptive separation at thermodynamics equilibrium, we show that surface functionalization is the most important factor in designing an efficient adsorbent for CO2 capture. Systematic Monte Carlo simulations revealed that adsorption of CH4 either pure or mixed with CO2 on oxidized nanoporous carbons is only slightly increased by the presence of functional groups (surface dipoles). In contrast, adsorption of CO2 is very sensitive to the number of carbonyl groups, which can be examined by a strong electric quadrupolar moment of CO2. Interestingly, the adsorbed amount of CH4 is strongly affected by the presence of the co-adsorbed CO2. In contrast, the CO2 uptake does not depend on the molar ratio of CH4 in the bulk mixture. The optimal carbonaceous porous adsorbent used for CO2 capture near ambient conditions should consist of narrow carbon nanopores with oxidized pore walls. Furthermore, the equilibrium separation factor was the greatest for CO2/CH4 mixtures with a low CO2 concentration. The maximum equilibrium separation factor of CO2 over CH4 of ~18-20 is theoretically predicted for strongly oxidized nanoporous carbons. Our findings call for a review of the standard uncharged model of carbonaceous materials used for the modeling of the adsorption separation processes of gas mixtures containing CO2 (and other molecules with strong electric quadrupolar moment or dipole moment).

Microwave-assisted synthesis of a series of lanthanide metal-organic frameworks and gas sorption properties

A series of isostructural microporous lanthanide metal-organic frameworks (MOFs) formulated as [Ln(2)(TPO)(2)(HCOO)]·(Me(2)NH(2))·(DMF)(4)·(H(2)O)(6) {Ln = Y (1), Sm (2), Eu (3), Gd (4), Tb (5), Dy (6), Ho (7), Er (8), Tm (9), Yb (10), and Lu (11); H(3)TPO = tris-(4-carboxylphenyl)phosphineoxide; DMF = N,N-dimethylformamide} has been synthesized under microwave-assisted solvothermal reaction for 30 min. Alternatively, if a conventional solvothermal reaction is carried out under the same temperature, a much longer time (3 days) is needed for the same phase in similar yield. Structure analysis reveals that the framework is a 4,8-connected network with point symbol (4(10)·6(16)·8(2)) (4(5)·6)(2), which is the subnet of alb net. Thermal gravimetric analyses performed on as-synthesized MOFs reveal that the frameworks have high thermal stability. The luminescent properties of 2, 3, 5, and 6 were investigated and show characteristic emissions for Sm(III), Eu(III), Tb(III), and Dy(III) at room temperature, respectively. Gas sorption properties of 1 and 3 were studied by experimentally measuring nitrogen, argon, carbon dioxide, methane, and hydrogen sorption isotherms. The resulting materials show high and preferential CO(2) adsorption over N(2) gas at ambient temperature, indicating that the present materials can be applied in a CO(2) capture process.

Progress in adsorption-based CO2 capture by metal-organic frameworks

Metal-organic frameworks (MOFs) have recently attracted intense research interest because of their permanent porous structures, large surface areas, and potential applications as novel adsorbents. The recent progress in adsorption-based CO(2) capture by MOFs is reviewed and summarized in this critical review. CO(2) adsorption in MOFs has been divided into two sections, adsorption at high pressures and selective adsorption at approximate atmospheric pressures. Keys to CO(2) adsorption in MOFs at high pressures and low pressures are summarized to be pore volumes of MOFs, and heats of adsorption, respectively. Many MOFs have high CO(2) selectivities over N(2) and CH(4). Water effects on CO(2) adsorption in MOFs are presented and compared with benchmark zeolites. In addition, strategies appeared in the literature to enhance CO(2) adsorption capacities and/or selectivities in MOFs have been summarized into three main categories, catenation and interpenetration, chemical bonding enhancement, and electrostatic force involvement. Besides the advantages, two main challenges of using MOFs in CO(2) capture, the cost of synthesis and the stability toward water vapor, have been analyzed and possible solutions and path forward have been proposed to address the two challenges as well (150 references).

Sulfonate-grafted porous polymer networks for preferential CO2 adsorption at low pressure

A porous polymer network (PPN) grafted with sulfonic acid (PPN-6-SO(3)H) and its lithium salt (PPN-6-SO(3)Li) exhibit significant increases in isosteric heats of CO(2) adsorption and CO(2)-uptake capacities. IAST calculations using single-component-isotherm data and a 15/85 CO(2)/N(2) ratio at 295 K and 1 bar revealed that the sulfonate-grafted PPN-6 networks show exceptionally high adsorption selectivity for CO(2) over N(2) (155 and 414 for PPN-6-SO(3)H and PPN-6-SO(3)Li, respectively). Since these PPNs also possess ultrahigh physicochemical stability, practical applications in postcombustion capture of CO(2) lie well within the realm of possibility.