Space-confined manganese oxides nanosheets for efficient catalytic decomposition of ozone

Ground-level ozone has long posed a substantial menace to human well-being and the ecological milieu. The widely reported manganese-based catalysts for ozone decomposition still facing the persisting issues encompass inefficiency and instability. To surmount these challenges, we developed a mesoporous silica thin films with perpendicular nanochannels (SBA(⊥)) confined Mn3O4 catalyst (Mn3O4@SBA(⊥)). Under a weight hourly space velocity (WHSV) of 500,000 mL g-1 h-1, the Mn3O4@SBA(⊥) catalyst exhibited 100% ozone decomposition efficiency in 5 h and stability across a wide humidity range, which exceed the performance of bulk Mn3O4 and Mn3O4 confine in commonly reported SBA-15. Rapidly decompose 20 ppm O3 to a safety level below 100 μg m-3 in the presence of dust in smog chamber (60 × 60 × 60 cm) was also realized. This prominent catalytic performance can be attributed to the unique confined structure engenders the highly exposed active sites, facilitate the reactant-active sites contact and impeded the water accumulation on the active sites. This work offers new insights into the design of confined structure catalysts for air purification.

Regulating Reactive Oxygen Species over M-N-C Single-Atom Catalysts for Potential-Resolved Electrochemiluminescence

The development of potential-resolved electrochemiluminescence (ECL) systems with dual emitting signals holds great promise for accurate and reliable determination in complex samples. However, the practical application of such systems is hindered by the inevitable mutual interaction and mismatch between different luminophores or coreactants. In this work, for the first time, by precisely tuning the oxygen reduction performance of M-N-C single-atom catalysts (SACs), we present a dual potential-resolved luminol ECL system employing endogenous dissolved O2 as a coreactant. Using advanced in situ monitoring and theoretical calculations, we elucidate the intricate mechanism involving the selective and efficient activation of dissolved O2 through central metal species modulation. This modulation leads to the controlled generation of hydroxyl radical (·OH) and superoxide radical (O2·-), which subsequently trigger cathodic and anodic luminol ECL emission, respectively. The well-designed Cu-N-C SACs, with their moderate oxophilicity, enable the simultaneous generation of ·OH and O2·-, thereby facilitating dual potential-resolved ECL. As a proof of concept, we employed the principal component analysis statistical method to differentiate antibiotics based on the output of the dual-potential ECL signals. This work establishes a new avenue for constructing a potential-resolved ECL platform based on a single luminophore and coreactant through precise regulation of active intermediates.

Highly efficient ozone elimination by metal doped ultra-fine Cu2O nanoparticles

Nowadays, ozone contamination becomes dominant in air and thus challenges the research and development of cost-effective catalyst. In this study, metal doped Cu2O catalysts are synthesized via reduction of Cu2+ by ascorbic acid in base solutions containing doping metal ions. The results show that compared with pure Cu2O, the Mg2+ and Fe2+ dopants enhance the O3 removal efficiency while Ni2+ depresses the activity. In specific, Mg-Cu2O shows high O3 removal efficiency of 88.4% in harsh environment of 600,000 mL/(g·hr) space velocity and 1500 ppmV O3, which is one of the highest in the literature. Photoluminescence and electron paramagnetic spectroscopy characterization shows higher concentration of crystal defects induced by the Mg2+ dopants, favoring the O3 degradation. The in-situ diffuse reflectance Fourier transform infrared spectroscopy shows the intermediate species in the O3 degradation process change from O22- dominant of pure Cu2O to O2- dominant of Mg-Cu2O, which would contribute to the high activity. All these results show the promising prospect of the Mg-Cu2O for highly efficiency O3 removal.

Recovery, Regeneration, and Reapplication of PFSA Polymer from End-of-Life PEMFC MEAs

We have developed a recovery, regeneration, and reapplication process for Nafion, a perfluorinated sulfonic acid (PFSA) ionomer, from end-of-life (EoL) low-temperature proton-exchange membrane (PEM) fuel cells (FCs). Samples of PFSA PEM recovered from EoL membrane-electrode assemblies (MEAs) with a history of close to 19,000 h of operation were recycled by dissolving the polymeric material in ethanol and applying the dissolved PFSA ionomer for producing the ionomer phase of the catalyst layer of new PEMFC cathodes. Structural characterizations show a marginally lower abundance of sulfonic groups for the EoL PEM compared to a fresh sample. Sulfonation of the former was employed to regenerate sulfonic groups to compensate for the lost ones. New gas-diffusion electrodes (GDEs) were prepared with the recycled PFSA ionomer both with and without sulfonation, and MEAs with these GDEs as cathodes were assembled through a state-of-the-art procedure. Electrochemical characterizations of the GDEs and single-cell studies of the MEAs showed that the electrochemical performances of catalyst layers containing recycled PFSA ionomer were at least similar to those containing fresh. Durability studies of the GDEs and MEAs, performed through a three-electrode liquid cell and a single cell, respectively, show the highest durability for the GDE/MEA with PFSA ionomer recycled without applying the sulfonation step. However, the GDE with PFSA ionomer obtained from recycling a re-sulfonated PEM shows a durability comparable to that of the GDE with fresh PFSA ionomer. Hence, PFSA material aged during PEMFC operation may be employed to produce highly functional and durable regenerated PFSA ionomer for PEMFC catalyst layers. The studied process of PFSA ionomer recycling is highly attractive for industrial adoption.

Progress and Perspective for In Situ Studies of Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cell (PEMFC) is one of the most promising energy conversion devices with high efficiency and zero emission. However, oxygen reduction reaction (ORR) at the cathode is still the dominant limiting factor for the practical development of PEMFC due to its sluggish kinetics and the vulnerability of ORR catalysts under harsh operating conditions. Thus, the development of high-performance ORR catalysts is essential and requires a better understanding of the underlying ORR mechanism and the failure mechanisms of ORR catalysts with in situ characterization techniques. This review starts with the introduction of in situ techniques that have been used in the research of the ORR processes, including the principle of the techniques, the design of the in situ cells, and the application of the techniques. Then the in situ studies of the ORR mechanism as well as the failure mechanisms of ORR catalysts in terms of Pt nanoparticle degradation, Pt oxidation, and poisoning by air contaminants are elaborated. Furthermore, the development of high-performance ORR catalysts with high activity, anti-oxidation ability, and toxic-resistance guided by the aforementioned mechanisms and other in situ studies are outlined. Finally, the prospects and challenges for in situ studies of ORR in the future are proposed.

Micromodification of the Catalyst Layer by CO to Increase Pt Utilization for Proton-Exchange Membrane Fuel Cells

Improving the utilization of platinum in proton-exchange membrane (PEM) fuel cells is critical to reducing their cost. In the past decade, numerous Pt-based oxygen reduction reaction catalysts with high specific and mass activities have been developed. However, the high activities are mostly achieved in rotating disk electrode (RDE) measurement and have rarely been accomplished at the membrane electrode assembly (MEA) level. The failure of these direct translations from RDE to MEA has been well documented with several key reasons having been previously identified. One of them is the resistance caused by complex mass transport pathways in the MEA. Herein, we improve the proton and oxygen transportations in the MEA by building a thin and uniform distribution of ionomer on the catalyst surface. As a result, a PEM fuel cell design is capable of showing a current density improvement of 38% at the same voltage (0.6 V) under the H₂/air operation.

In Situ Mechanistic Insights for the Oxygen Reduction Reaction in Chemically Modulated Ordered Intermetallic Catalyst Promoting Complete Electron Transfer

The well-known limitation of alkaline fuel cells is the slack kinetics of the cathodic half-cell reaction, the oxygen reduction reaction (ORR). Platinum, being the most active ORR catalyst, is still facing challenges due to its corrosive nature and sluggish kinetics. Many novel approaches for substituting Pt have been reported, which suffer from stability issues even after mighty modifications. Designing an extremely stable, but unexplored ordered intermetallic structure, Pd₂Ge, and tuning the electronic environment of the active sites by site-selective Pt substitution to overcome the hurdle of alkaline ORR is the main motive of this paper. The substitution of platinum atoms at a specific Pd position leads to Pt_0.2Pd_1.8Ge demonstrating a half-wave potential (E_1/2) of 0.95 V vs RHE, which outperforms the state-of-the-art catalyst 20% Pt/C. The mass activity (MA) of Pt_0.2Pd_1.8Ge is 320 mA/mg_Pt, which is almost 3.2 times better than that of Pt/C. E_1/2 and MA remained unaltered even after 50,000 accelerated degradation test (ADT) cycles, which makes it a promising stable catalyst with its activity better than that of the state-of-the-art Pt/C. The undesired 2e^- transfer ORR forming hydrogen peroxide (H₂O₂) is diminished in Pt_0.2Pd_1.8Ge as visible from the rotating ring-disk electrode (RRDE) experiment, spectroscopically visualized by in situ Fourier transform infrared (FTIR) spectroscopy and supported by computational studies. The effect of Pt substitution on Pd has been properly manifested by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). The swinging of the oxidation state of atomic sites of Pt_0.2Pd_1.8Ge during the reaction is probed by in situ XAS, which efficiently enhances 4e^- transfer, producing an extremely low percentage of H₂O₂.

Spectroscopic Investigation of Catalyst Inks and Thin Films Toward the Development of Ionomer Quality Control

As the production of polymer electrolyte fuel cells expands, novel quality control methods must be invented or adapted in order to support expected rates of production. Ensuring the quality of deposited catalyst layers is an essential step in the fuel cell manufacturing process, as the efficiency of a fuel cell is reliant on the catalyst layer being uniform at both the target platinum loading and the target ionomer content. Implementing a quality control method that is sensitive to these aspects is imperative, as wasting precious metals and other catalyst materials is expensive, and represents a potential barrier to entry into the field for manufacturers experimenting with novel deposition processes. In this work, we analyzed catalyst inks to determine if their ionomer content could be quantized spectroscopically. Attenuated total reflection (ATR) Fourier transform infrared spectroscopic technique was investigated producing a signal proportional to the ionomer content. ATR spectroscopy was able to quantitatively differentiate samples in which the ionomer to carbon mass ratio (I/C) varied between 0.9 and 3.0. The I/C ratio was correlated to the measured ATR signal near the CF₂ vibrational bands located between 1100 cm^-1 and 1400 cm^-1. The experimental results obtained constitute a step toward the development of novel quality control methodologies for catalyst inks utilized by the fuel cell industry.

Atomic-Layered Cu5 Nanoclusters on FeS2 with Dual Catalytic Sites for Efficient and Selective H2 O2 Activation

Regulating the distribution of reactive oxygen species generated from H₂ O₂ activation is the prerequisite to ensuring the efficient and safe use of H₂ O₂ in the chemistry and life science fields. Herein, we demonstrate that constructing a dual Cu-Fe site through the self-assembly of single-atomic-layered Cu₅ nanoclusters onto a FeS₂ surface achieves selective H₂ O₂ activation with high efficiency. Unlike its unitary Cu or Fe counterpart, the dual Cu-Fe sites residing at the perimeter zone of the Cu₅ /FeS₂ interface facilitate H₂ O₂ adsorption and barrierless decomposition into ⋅OH via forming a bridging Cu-O-O-Fe complex. The robust in situ formation of ⋅OH governed by this atomic-layered catalyst enables the effective oxidation of several refractory toxic pollutants across a broad pH range, including alachlor, sulfadimidine, p-nitrobenzoic acid, p-chlorophenol, p-chloronitrobenzene. This work highlights the concept of building a dual catalytic site in manipulating selective H₂ O₂ activation on the surface molecular level towards efficient environmental control and beyond.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

Activity Promotion of Core and Shell in Multifunctional Core-Shell Co2 P@NC Electrocatalyst by Secondary Metal Doping for Water Electrolysis and Zn-Air Batteries

Developing cost-efficient multifunctional electrocatalysts is highly critical for the integrated electrochemical energy-conversion systems such as water electrolysis based on hydrogen/oxygen evolution reactions (HER/OER) and metal-air batteries based on OER/oxygen reduction reactions (ORR). The core-shell structured materials with transition metal phosphide as the core and nitrogen-doped carbon (NC) as the shell have been known as promising HER electrocatalysts. However, their oxygen-related electrocatalytic activities still remain unsatisfactory, which severely limits their further applications. Herein an effective strategy to improve the core and shell performances of core-shell Co₂ P@NC electrocatalysts through secondary metal (e.g., Fe, Ni, Mo, Al, Mn) doping (termed M-Co₂ P@M-N-C) is reported. The as-synthesized M-Co₂ P@M-N-C electrocatalysts show multifunctional HER/OER/ORR activities and good integrated capabilities for overall water splitting and Zn-air batteries. Among the M-Co₂ P@M-N-C catalysts, Fe-Co₂ P@Fe-N-C electrocatalyst exhibits the best catalytic activities, which is closely related to the configuration of highly active species (Fe-doping Co₂ P core and Fe-N-C shell) and their subtle synergy, and a stable carbon shell for outstanding durability. Combination of electrochemical-based in situ Fourier transform infrared spectroscopy with extensive experimental investigation provides deep insights into the origin of the activity and the underlying electrocatalytic mechanisms at the molecular level.

Overall Oxygen Electrocatalysis on Nitrogen-Modified Carbon Catalysts: Identification of Active Sites and In Situ Observation of Reactive Intermediates

The recent mechanistic understanding of active sites, adsorbed intermediate products, and rate-determining steps (RDS) of nitrogen (N)-modified carbon catalysts in electrocatalytic oxygen reduction (ORR) and oxygen evolution reaction (OER) are still rife with controversy because of the inevitable coexistence of diverse N configurations and the technical limitations for the observation of formed intermediates. Herein, seven kinds of aromatic molecules with designated single N species are used as model structures to investigate the explicit role of each common N group in both ORR and OER. Specifically, dynamic evolution of active sites and key adsorbed intermediate products including O2 (ads), superoxide anion O2 - *, and OOH* are monitored with in situ spectroscopy. We propose that the formation of *OOH species from O2 - * (O2 - *+H2 O→OOH*+OH- ) is a possible RDS during the ORR process, whereas the generation of O2 from OOH* species is the most likely RDS during the OER process.

Laccase Immobilization Strategies for Application as a Cathode Catalyst in Microbial Fuel Cells for Azo Dye Decolourization

Enzymatic biocathodes have the potential to replace platinum as an expensive catalyst for the oxygen reduction reaction in microbial fuel cells (MFCs). However, enzymes are fragile and prone to loss of activity with time. This could be circumvented by using suitable immobilization techniques to maintain the activity and increase longevity of the enzyme. In the present study, laccase from Trametes versicolor was immobilized using three different approaches, i.e., crosslinking with electropolymerized polyaniline (PANI), entrapment in copper alginate beads (Cu-Alg), and encapsulation in Nafion micelles (Nafion), in the absence of redox mediators. These laccase systems were employed in cathode chambers of MFCs for decolourization of Acid orange 7 (AO7) dye. The biocatalyst in the anode chamber was Shewanella oneidensis MR-1 in each case. The enzyme in the immobilized states was compared with freely suspended enzyme with respect to dye decolourization at the cathode, enzyme activity retention, power production, and reusability. PANI laccase showed the highest stability and activity, producing a power density of 38 ± 1.7 mW m⁻² compared to 25.6 ± 2.1 mW m⁻² for Nafion laccase, 14.7 ± 1.04 mW m⁻² for Cu-Alg laccase, and 28 ± 0.98 mW m⁻² for the freely suspended enzyme. There was 81% enzyme activity retained after 1 cycle (5 days) for PANI laccase compared to 69% for Nafion and 61.5% activity for Cu-alginate laccase and 23.8% activity retention for the freely suspended laccase compared to initial activity. The dye decolourization was highest for freely suspended enzyme with over 85% decolourization whereas for PANI it was 75.6%, Nafion 73%, and 81% Cu-alginate systems, respectively. All the immobilized laccase systems were reusable for two more cycles. The current study explores the potential of laccase immobilized biocathode for dye decolourization in a microbial fuel cell.

Bridging the Gap in the Mechanistic Understanding of Electrocatalysis via In Situ Characterizations

Electrocatalysis offers a promising strategy to take advantage of the increasingly available and affordable renewable energy for the sustainable production of fuels and chemicals. Attaining this promise requires a molecular level insight of the electrical interface that can be used to tailor the selectivity of electrocatalysts. Addressing this selectivity challenge remains one of the most important areas in modern electrocatalytic research. In this Perspective, we focus on the use of in situ techniques to bridge the gap in the fundamental understanding of electrocatalytic processes. We begin with a brief discussion of traditional electrochemical techniques, ex situ measurements and in silico analysis. Subsequently, we discuss the utility and limitations of in situ methodologies, with a focus on vibrational spectroscopies. We then end by looking ahead toward promising new areas for the application of in situ techniques and improvements to current methods.

DFT Calculations of the Adsorption States of O2 on OH/H2O-Covered Pt(111)

The adsorption of O₂ on Pt(111) was studied with Density Functional Theory calculations. Various adsorbed states of O₂ were evaluated on clean and OH/H₂O-covered Pt(111) surfaces at the solid/gas and solid/liquid interfaces. The results reveal that the adsorption of O₂ on OH/H₂O-covered Pt(111) surface starts with the physical adsorption of O₂. Two other adsorption states are reachable from the physisorbed state, the end-on, and bridging chemisorbed O₂. Analysis of the energetics of these adsorption states shows that O₂ physically adsorbed at the OH/H₂O-covered Pt( 111) surface is a high energy state that requires activation to transition to the end-on chemisorbed O₂ state. On the other hand, the end-on chemisorbed state can transition to the bridging chemisorbed state with only a small activation energy when a nearby Pt adsorption site is available. Frequency analysis of the physisorbed, end-on, and bridging adsorption states shows that adsorbed O₂ stretching frequencies are close to 1400, 1300, and 900 cm^-1, respectively.

Pt-Based Nanocrystal for Electrocatalytic Oxygen Reduction

Currently, Pt-based electrocatalysts are adopted in the practical proton exchange membrane fuel cell (PEMFC), which converts the energy stored in hydrogen and oxygen into electrical power. However, the broad implementation of the PEMFC, like replacing the internal combustion engine in the present automobile fleet, sets a requirement for less Pt loading compared to current devices. In principle, the requirement needs the Pt-based catalyst to be more active and stable. Two main strategies, engineering of the electronic (d-band) structure (including controlling surface facet, tuning surface composition, and engineering surface strain) and optimizing the reactant adsorption sites are discussed and categorized based on the fundamental working principle. In addition, general routes for improving the electrochemical surface area, which improves activity normalized by the unit mass of precious group metal/platinum group metal, and stability of the electrocatalyst are also discussed. Furthermore, the recent progress of full fuel cell tests of novel electrocatalysts is summarized. It is suggested that a better understanding of the reactant/intermediate adsorption, electron transfer, and desorption occurring at the electrolyte-electrode interface is necessary to fully comprehend these electrified surface reactions, and standardized membrane electrode assembly (MEA) testing protocols should be practiced, and data with full parameters detailed, for reliable evaluation of catalyst functions in devices.

In situ study of oxidation states of platinum nanoparticles on a polymer electrolyte fuel cell electrode by near ambient pressure hard X-ray photoelectron spectroscopy

We performed in situ hard X-ray photoelectron spectroscopy (HAXPES) measurements of the electronic states of platinum nanoparticles on the cathode electrocatalyst of a polymer electrolyte fuel cell (PEFC) using a near ambient pressure (NAP) HAXPES instrument having an 8 keV excitation source. We successfully observed in situ NAP-HAXPES spectra of the Pt/C cathode catalysts of PEFCs under working conditions involving water, not only for the Pt 3d states with large photoionization cross-sections in the hard X-ray regime but also for the Pt 4f states and the valence band with small photoionization cross-sections. Thus, this setup allowed in situ observation of a variety of hard PEFC systems under operating conditions. The Pt 4f spectra of the Pt/C electrocatalysts in PEFCs clearly showed peaks originating from oxidized Pt(ii) at 1.4 V, which unambiguously shows that Pt(iv) species do not exist on the Pt nanoparticles even at such large positive voltages. The water oxidation reaction might take place at that potential (the standard potential of 1.23 V versus a standard hydrogen electrode) but such a reaction should not lead to a buildup of detectable Pt(iv) species. The voltage-dependent NAP-HAXPES Pt 3d spectra revealed different behaviors with increasing voltage (0.6 → 1.0 V) compared with decreasing voltage (1.0 → 0.6 V), showing a clear hysteresis. Moreover, quantitative peak-fitting analysis showed that the fraction of non-metallic Pt species matched the ratio of the surface to total Pt atoms in the nanoparticles, which suggests that Pt oxidation only takes place at the surface of the Pt nanoparticles on the PEFC cathode, and the inner Pt atoms do not participate in the reaction. In the valence band spectra, the density of electronic states near the Fermi edge reduces with decreasing particle size, indicating an increase in the electrocatalytic activity. Additionally, a change in the valence band structure due to the oxidation of platinum atoms was also observed at large positive voltages. The developed apparatus is a valuable in situ tool for the investigation of the electronic states of PEFC electrocatalysts under working conditions.

The Priority and Challenge of High-Power Performance of Low-Platinum Proton-Exchange Membrane Fuel Cells

Substantial progress has been made in reducing proton-exchange membrane fuel cell (PEMFC) cathode platinum loadings from 0.4-0.8 mgPt/cm(2) to about 0.1 mgPt/cm(2). However, at this level of cathode Pt loading, large performance loss is observed at high-current density (>1 A/cm(2)), preventing a reduction in the overall stack cost. This next developmental step is being limited by the presence of a resistance term exhibited at these lower Pt loadings and apparently due to a phenomenon at or near the catalyst surface. This issue can be addressed through the design of catalysts with high and stable Pt dispersion as well as through development and implementation of ionomers designed to interact with Pt in a way that does not constrain oxygen reduction reaction rates. Extrapolating from progress made in past decades, we are optimistic that the concerted efforts of materials and electrode designers can resolve this issue, thus enabling a large step toward fuel cell vehicles that are affordable for the mass market.

New molecular scale insights into the α-transition of Nafion® thin films from variable temperature ATR-FTIR spectroscopy

IR spectroscopy based direct evidence of long range order–disorder in the Nafion backbone correlated with the α-transition temperature.

Enhanced Fenton-like degradation of refractory organic compounds by surface complex formation of LaFeO(3) and H(2)O(2)

Nanoscale LaFeO(3) was prepared via sol-gel method and characterized by XRD, FTIR and N2 adsorption/desorption experiment. The results indicated that, LaFeO(3) had a typical perovskite structure with a BET area of 8.5m(2)/g. LaFeO(3) exhibited excellent Fenton activity and stability for the degradation of pharmaceuticals and herbicides in water, as demonstrated with sulfamethoxazole, phenazone, phenytoin, acyclovir and 2,4-dichlorophenoxyacetic acid, 2-chlorophenol. Among them, sulfamethoxazole (SMX) could be completely removed in LaFeO(3)-H(2)O(2) system after reaction for 120 min at neutral pH. Based on the ATR-FTIR analysis, the surface complex of LaFeO(3) and H(2)O(2). was formed, which was important and essential for the enhanced Fenton reaction by accelerating the cycle of Fe(3+)/Fe(2+). Hence, more OH and O(2)(-)/HO(2)(-) were then produced in LaFeO(3)-H(2)O(2) system, resulting in more efficient removal of refractory organic compounds. Based on the surface interaction of LaFeO(3) and H(2)O(2), a heterogeneous Fenton reaction mechanism was proposed.

Environmentally Friendly Carbon-Preserving Recovery of Noble Metals From Supported Fuel Cell Catalysts

The dissolution of noble-metal catalysts under mild and carbon-preserving conditions offers the possibility of in situ regeneration of the catalyst nanoparticles in fuel cells or other applications. Here, we report on the complete dissolution of the fuel cell catalyst, platinum nanoparticles, under very mild conditions at room temperature in 0.1 M HClO4 and 0.1 M HCl by electrochemical potential cycling between 0.5-1.1 V at a scan rate of 50 mV s(-1) . Dissolution rates as high as 22.5 μg cm(-2) per cycle were achieved, which ensured a relatively short dissolution timescale of 3-5 h for a Pt loading of 0.35 mg cm(-2) on carbon. The influence of chloride ions and oxygen in the electrolyte on the dissolution was investigated, and a dissolution mechanism is proposed on the basis of the experimental observations and available literature results. During the dissolution process, the corrosion of the carbon support was minimal, as observed by X-ray photoelectron spectroscopy (XPS).

AC. Electrospun carbon nitride supported on poly(vinyl) alcohol as an electrocatalyst for oxygen reduction reactions

Dense, multi-layered poly(vinyl) alcohol nanofibers dispersed with catalytically active carbon nitride nanoparticles were synthesized using an electrospinning process.

Stability and controlled antibiotic release from thin films embedded with antibiotic loaded mesoporous silica nanoparticles

Thin films incorporated with gentamicin loaded mesoporous silica nanoparticles exhibit excellent stability and controlled release profile of the encapsulated antibiotic.