Sensing of polycyclic aromatic hydrocarbons with cyclodextrin inclusion complexes on silver nanoparticles by surface-enhanced Raman scattering

A gold-silver nanostar 2D array composite structure for rapid SERS determination of PAHs

This study developed a portable multi-ring aromatic hydrocarbon (PAH) detection tool using a dual-metal surface-enhanced Raman scattering (SERS) substrate. Gold-silver nanostars (AuNS@Ag) were synthesized by a secondary seed-mediated growth method and assembled into a two-dimensional array by a liquid-phase interface self-assembly method, uniformly deposited on a silicon wafer. The PAHs in water samples were identified using a portable Raman spectrometer. The SERS detection platform has high sensitivity and stability, and can detect pyrene and phenanthrene with concentrations of 10-8 M and 0.5 × 10-8 M, respectively. The stable dual-metal nanomaterial AuNS@Ag 2D array has potential application prospects and can be used for environmental monitoring.

Rapid and On-Site Approaches for Determination of Polycyclic Aromatic Hydrocarbons in Water and Air by Surface-Enhanced Raman Spectroscopy

Polycyclic aromatic hydrocarbons (PAHs) represent a class of carcinogenic, teratogenic, and mutagenic aromatic organic pollutants that are ubiquitous in the environment. The rapid and on-site detection of PAHs remains a challenge. This study proposes point-of-use (POU) surface-enhanced Raman spectroscopy (SERS)-based strategies for the qualitative and quantitative analyses of PAHs in environmental water and air. The results demonstrate clear correlations between the signal intensity and the logarithmic concentration of PAHs in water (ranging from 2.5 to 100 ppb), with satisfactory recovery and reproducibility. A similar trend was observed for PAHs on glass fiber filters modified with silver nanoparticles (AgNPs@GF filter). Specifically, the limits of detection (LOD) for fluoranthene, phenanthrene, and pyrene in water were 0.7, 1.0, and 0.1 ppb, respectively, while the LOD for fluoranthene, phenanthrene, and pyrene on the AgNPs@GF filter were 9.11, 18.18, and 14.59 ppb. Recovery rates in spiked real water and filters ranged from 83% to 126%, and the entire detection process was completed within 1 min. These findings highlight the significant potential of this method as a powerful tool for rapid on-site analysis of PAHs in various environmental matrices.

SERS as a tool for determination of structurally related compounds: The case of sulfanilamide class antibiotics

Analysis of real objects based on surface-enhanced Raman spectroscopy (SERS) often utilizes new SERS substrates and/or complex analysis procedures, and they are optimized for only the determination of a single analyte. Moreover, analysis simplicity and selectivity are often sacrificed for maximum (sometimes unnecessary) sensitivity. Consequently, this trend limits the versatility of SERS analysis and complicates its practical implementation. Thus, we have developed a universal, but simple SERS assay suitable for the determination of structurally related antibiotics (five representatives of the sulfanilamide class) in complex objects (human urine and saliva). The assay involves only mixing of acidified analyzed solution with co-activating agent (polydiallyldimethylammonium chloride - PDDA) and SERS substrate (standard colloidal silver nanoparticles). Acidification promotes the generation of SERS spectra with maximum similarity and intensity, which is explained by the favorable enhancement of the protonated sulfanilamide moiety (a structurally similar part of the studied antibiotics) as a result of its strong electrostatic interaction with the SERS-active surface. Meanwhile, the addition of PDDA improves analysis selectivity by reducing background signal from body fluids, enabling to simplify sample pretreatment (dilution for urine; mucin removal and dilution for saliva). Therefore, the assay allows for rapid (≤10 min), precise, and accurate class-specific determination of sulfanilamides within concentration ranges suitable for non-invasive therapeutic drug monitoring in urine (40-600 μM) and saliva (10-30 μM). We also believe that thorough investigation of structurally related analytes and accompanying effects (e.g., high spectral similarity) is a promising direction to improve the understanding of SERS in general and expand its capabilities as an analytical tool.

Raman spectroscopy combined with partial least squares (PLS) based on hybrid spectral preprocessing and backward interval PLS (biPLS) for quantitative analysis of four PAHs in oil sludge

Polycyclic aromatic hydrocarbons (PAHs) contained in a large amount of oily sludge produced in petroleum and petrochemical production has become one of the main environmental protection concerns in the industry. The accurate determination of PAHs is of great significance in the field of petroleum geochemistry and environmental protection. In this study, Raman spectroscopy combined with partial least squares (PLS) based on different hybrid spectral preprocessing methods and variable selection strategies was proposed for quantitative analysis of phenanthrene, fluoranthrene, fluorene and naphthalene (Phe, Flt, Flu and Nap) in oil sludge. At first, PAHs in oily sludge was extracted by solid-liquid extraction with methanol as extractant, and Raman spectra of 21 oily sludge samples were collected by portable Raman spectrometer. And then, the influence of first derivative (D1st), wavelet transform (WT) and their hybrid spectral preprocessing on the predictive performance of the PLS calibration model was discussed. Thirdly, biPLS (backward interval partial least squares) was used to optimize the input variables before and after the hybrid spectral preprocessing methods, and the influence of biPLS and the hybrid spectral preprocessing sequence on the predictive performance of the PLS calibration model was discussed. Finally, the predictive performance of the PLS calibration model was optimized according to the results of leave-one-out cross-validation (LOOCV) method. The results show that the biPLS-D1st-WT-PLS calibration model established by using biPLS first to select the characteristic variables, followed by hybrid spectral preprocessing of the characteristic variables, has better prediction performance for Flt (determination coefficient of prediction (R2P) = 0.9987, and the mean relative error of prediction (MREP) = 0.0606). For Phe, Flu and Nap, the WT-biPLS-PLS calibration model has a better predictive effect (R2P are 0.9995, 0.9996 and 0.9983, and MREP are 0.0426, 0.0719 and 0.0497, respectively). In general, portable Raman spectroscopy combined with PLS calibration model based on different hybrid spectral preprocessing and variable selection strategies has achieved good prediction results for quantitative analysis of four PAHs in oily sludge. It is a new strategy to firstly select the characteristic variables of the original spectra, and secondly to preprocess the characteristic variables by the hybrid spectral preprocessing, which will provide a new idea for the establishment of quantitative analysis methods for PAHs in oily sludge.

Constructing a Raman and surface-enhanced Raman scattering spectral reference library for fine-particle analysis

Fine particles associated with haze pollution threaten the health of over 400 million people in China. Owing to excellent non-destructive fingerprint recognition characteristics, Raman and surface-enhanced Raman scattering (SERS) are often used to analyze the composition of fine particles to determine their physical and chemical properties as well as reaction mechanisms. However, there is no comprehensive Raman spectral library of fine particles. Furthermore, various studies that used SERS for fine-particle composition analysis showed that the uniqueness of the SERS substrates and different excitation wavelengths can produce a different spectrum for the same fine-particle component. To overcome this limitation, we conducted SERS experiments with a portable Raman spectrometer using two common SERS substrates (silver (Ag) foil and gold nanoparticles (Au NPs)) and a 785 nm laser. Herein, we introduced three main particle component types (sulfate-nitrate-ammonium (SNA), organic material, and soot) with a total of 39 chemical substances. We scanned the solid Raman, liquid Raman, and SERS spectra of these substances and constructed a fine-particle reference library containing 105 spectra. Spectral results indicated that for soot and SNA, the differences in characteristic peaks mainly originated from the solid-liquid phase transition; Ag foil had little effect on this difference, while the Au NPs caused a significant red shift in the peak positions of polycyclic aromatic hydrocarbons. Moreover, with various characteristic peak positions in the three types of spectra, we could quickly and correctly distinguish substances. We hope that this spectral library will aid in the future identification of fine particles.

Metasurface-Enhanced Raman Spectroscopy (mSERS) for Oriented Molecular Sensing

Surface-enhanced Raman spectroscopy (SERS) is a widely used sensing technique for ultrasensitivity chemical sensing, biomedical detection, and environmental analysis. Because SERS signal is proportional to the fourth power of the local electric field, several SERS applications have focused on the design of plasmonic nanogaps to take advantage of the extremely strong near-field enhancement that results from plasmonic coupling, but few designs have focused on how SERS detection is affected by molecular orientation within these nanogaps. Here, we demonstrate a nanoparticle-on-metal metasurface designed for near-perfect optical absorption as a platform for Raman detection of highly oriented molecular analytes, including two-dimensional materials and aromatic molecules. This metasurface platform overcomes challenges in nanoparticle aggregation, which commonly leads to low or fluctuating Raman signals in other colloidal nanoparticle platforms. Our metasurface-enhanced Raman spectroscopy (mSERS) platform is based on a colloidal Langmuir-Schaefer deposition, with up to 32% surface coverage density of nanogaps across an entire sensor chip. In this work, we perform both simulations of the local electric field and experimental characterization of the mSERS signal obtained for oriented molecular layers. We then demonstrate this mSERS platform for the quantitative detection of the drinking-water toxin polybrominated diphenyl ether (BDE-15), with a limit of detection of 0.25 μM under 530 μW excitation. This detection limit is comparable to other SERS-based sensors operating at laser powers over 3 orders of magnitude higher, indicating the promise of our mSERS platform for nondestructive and low-level analyte detection.

Advances in Optical Sensors for Persistent Organic Pollutant Environmental Monitoring

Optical chemical sensors are widely applied in many fields of modern analytical practice, due to their simplicity in preparation and signal acquisition, low costs, and fast response time. Moreover, the construction of most modern optical sensors requires neither wire connections with the detector nor sophisticated and energy-consuming hardware, enabling wireless sensor development for a fast, in-field and online analysis. In this review, the last five years of progress (from 2017 to 2021) in the field of optical chemical sensors development for persistent organic pollutants (POPs) is provided. The operating mechanisms, the transduction principles and the types of sensing materials employed in single selective optical sensors and in multisensory systems are reviewed. The selected examples of optical sensors applications are reported to demonstrate the benefits and drawbacks of optical chemical sensor use for POPs assessment.

Intelligent Detection and Analysis of Polycyclic Aromatic Hydrocarbons Based on Surface-Enhanced Raman Scattering Spectroscopy

Cycloaromatic hydrocarbons are a type of potentially hazardous chemicals that are widely present in the environment and pose a serious threat to human health. However, the traditional research methods for their detection process are cumbersome, the detection cycle is long, and the sensitivity is low. In response to the above problems, this article combines the molecular fingerprint information characteristics of surface-enhanced Raman scattering technology to simulate the four polycyclic aromatic hydrocarbons of pyrene, anthracene, phenanthrene, and trichenium and quantitative detection of cyclic aromatic hydrocarbons and four kinds of polycyclic aromatic hydrocarbon mixtures. The experimental results show that the PAHs based on SERS have the advantages of higher sensitivity and high selectivity, which verifies the accuracy and feasibility of the method in this article.

Preparation of Fe3O4@PDA@Au@GO Composite as SERS Substrate and Its Application in the Enrichment and Detection for Phenanthrene

In this study, highly active Fe₃O₄@PDA@Au@GO surface-enhanced Raman spectroscopy (SERS) active substrate was synthesized for application in the enrichment and detection of trace polycyclic aromatic hydrocarbons (PAHs) in the environment. The morphology and structure were characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and UV–visible absorption spectrum (UV–vis spectra). The effect of each component of Fe₃O₄@PDA@Au@GO nanocomposites on SERS was explored, and it was found that gold nanoparticles (Au NPs) are crucial to enhance the Raman signal based on the electromagnetic enhancement mechanism, and apart from enriching the PAHs through π–π interaction, graphene oxide (GO) also generates strong chemical enhancement of Raman signals, and polydopamine (PDA) can prevent Au from shedding and agglomeration. The existence of Fe3O4 aided the quick separation of substrate from the solutions, which greatly simplified the detection procedure and facilitated the reuse of the substrate. The SERS active substrate was used to detect phenanthrene in aqueous solution with a detection limit of 10⁻⁷ g/L (5.6 × 10⁻¹⁰ mol/L), which is much lower than that of ordinary Raman, it is promising for application in the enrichment and detection of trace PAHs.

In Situ Microfluidic SERS Chip for Ultrasensitive Hg2+ Sensing Based on I--Functionalized Silver Aggregates

Mercury(II) ions are causing serious environmental pollution and health damage. Developing a simple, rapid, and sensitive sensor for Hg²⁺ detection is of great significance. Herein, we demonstrate an I^--functionalized surface-enhanced Raman scattering (SERS) substrate for rapid and sensitive Hg²⁺ sensing on a highly integrated microfluidic platform. Based on the combination reaction between I^- and Hg²⁺, the Hg²⁺ sensing is achieved via the SERS intensity "turn-off" strategy, where HgI₂ precipitation is formed on an SERS substrate interface, dissociating the Raman reporters that coadsorbed with I^-. Owing to the strong binding constant between I^- and Hg²⁺, our I^--functionalized substrate demonstrates a very fast sensing response (∼150 s). Through reliable in situ SERS detection, a robust calibration curve between the "turn-off" signal and "lgC" is obtained in a broad concentration range of 10^-9 to 10^-13 M. Additionally, the detectable Hg²⁺ concentration can be as low as 1 fM. The good selectivity toward Hg²⁺ is also verified by testing about a dozen common metal ions in water, such as K⁺, Na⁺, Ca²⁺, Mg²⁺, and so forth. Furthermore, we apply the SERS sensor for real tap and lake water sample detection, and good recoveries of 113, 97, and 107% are obtained. With its advantages of high integration, simple preparation, fast response, high sensitivity, and reliability, the proposed I^--functionalized SERS sensor microfluidic chip can be a promising platform for real-time and on-site Hg²⁺ detection in natural water.

Development of shipboard automatic flow injection analysis-Surface-enhanced Raman spectroscopy instrument toward onsite detection of trace polycyclic aromatic hydrocarbons in water environment

The qualitative and quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) has been important for the environmental control of persistent organic pollutants for decades. Considering the potential risk of deterioration, degradation, and external pollution during transportation, the development of rapid and onsite detection of trace PAHs is in demand. Here, taking the advantage of high sensitivity of surface-enhanced Raman spectroscopy (SERS), we developed a shipboard instrument by combining a portable Raman instrument and a flow injection device, integrating the sample pretreatment and target detection step by step. The feasibility of the instrument was demonstrated by detecting trace benzo[a]pyrene from different water environments with the lowest detection concentration less than 1 µg/l. The reliable stability and repeatability indicate that in the case of emergency response, the developed flow injection analysis-SERS instrument is very promising for the quantitative and qualitative analysis of diverse organic pollutants other than PAHs in water environments.

Size-controlled synthesis of cyclodextrin-capped gold nanoparticles for molecular recognition using surface-enhanced Raman scattering

Cyclodextrin (CD)-capped gold nanoparticles (AuNPs) can be applied in sensing, catalysis, and self-assembly processes due to their molecular recognition ability. As the plasmon resonance of AuNPs depends on their size, the size-controlled synthesis of CD-capped AuNPs is essential for the development of these applications. Herein, we successfully synthesized β-CD-capped AuNPs with diameters of 24-85 nm using a seed-mediated growth method. The AuNPs were prepared using a β-CD as both the reducing agent and the capping agent. Harsh reagents such as NaBH₄ and NaOH were not used. The size-controlled synthesis of β-CD-capped AuNPs was achieved by changing the amount of seed solution. We fabricated monolayers of β-CD-capped AuNPs by liquid-liquid interfacial self-assembly for application in surface-enhanced Raman scattering (SERS). The SERS intensity is significantly improved by using larger β-CD-capped AuNPs. In addition, we found that β-CDs can detect pyrene with higher sensitivity than α-CDs on the basis of the difference in molecular recognition ability between α-CDs and β-CDs.

Surface-Enhanced Raman Spectroscopy for Bisphenols Detection: Toward a Better Understanding of the Analyte-Nanosystem Interactions

Silver nanoparticles functionalized with thiolated β-cyclodextrin (CD-SH) were employed for the detection of bisphenols (BPs) A, B, and S by means of surface-enhanced Raman spectroscopy (SERS). The functionalization of Ag nanoparticles with CD-SH leads to an improvement of the sensitivity of the implemented SERS nanosensor. Using a multivariate analysis of the SERS data, the limit of detection of these compounds was estimated at about 10⁻⁷ M, in the range of the tens of ppb. Structural analysis of the CD-SH/BP complex was performed by density functional theory (DFT) calculations. Theoretical results allowed the assignment of key structural vibrational bands related to ring breathing motions and the inter-ring vibrations and pointed out an external interaction due to four hydrogen bonds between the hydroxyl groups of BP and CD located at the external top of the CD cone. DFT calculations allowed also checking the interaction energies of the different molecular species on the Ag surface and testing the effect of the presence of CD-SH on the BPs’ affinity. These findings were in agreement with the experimental evidences that there is not an actual inclusion of BP inside the CD cavity. The SERS sensor and the analysis procedure of data based on partial least square regression proposed here were tested in a real sample consisting of the detection of BPs in milk extracts to validate the detection performance of the SERS sensor.

Dual-Purpose SERS Sensor for Selective Determination of Polycyclic Aromatic Compounds via Electron Donor-Acceptor Traps

Toxic, carcinogenic, and mutagenic properties of polycyclic aromatic hydrocarbons (PAHs) and environmental pollution caused by polycyclic aromatic sulfur heterocycles (PASHs) postulate the importance of their selective and sensitive determination in environmental and oil fuel samples. Surface-enhanced Raman spectroscopy (SERS) opens up an avenue toward multiplex analysis of complex mixtures, however not every molecule gives high enhancement factors and, thus, cannot be reliably detected via SERS. However, the sensitivity can be drastically increased by additional resonant enhancement as a result of the analyte absorption band overlapping with the surface plasmon band of nanoparticles (NPs) and the laser excitation wavelength. Using this idea, we developed a dual-purpose SERS sensor based on trapping the target PAHs and PASHs into colored charge-transfer complexes (CTCs) with selected organic π-acceptor molecules on the surface of AgNPs. Studying, computing, and then comparing stability constants of the formed CTC served as a powerful explanation and prediction tool for a wise choice of π-acceptor indicator systems for the further silver surface modification. Moreover, we show that CTC formation can be effectively utilized for increasing both selectivity and sensitivity by simple liquid-liquid extraction prior to SERS measurements. For the first time, the dual-purpose SERS sensor allowed determination of two different classes of polycyclic aromatic fuel components down to 10 nM concentration, lower than that restricted by the ASTM regulation, and demonstrated multi-purpose capabilities of the developed approach.

Three-dimensional porous SERS powder for sensitive liquid and gas detections fabricated by engineering dense "hot spots" on silica aerogel

A three-dimensional porous SERS powder material, Ag nanoparticles-engineered-silica aerogel, was developed. Utilizing an in situ chemical reduction strategy, Ag nanoparticles were densely assembled on porous aerogel structures, thus forming three-dimensional "hot spots" distribution with intrinsic large specific surface area and high porosity. These features can effectively enrich the analytes on the metal surface and provide huge near field enhancement. Highly sensitive and homogeneous SERS detections were achieved not only on the conventional liquid analytes but also on gas with the enhancement factor up to ∼10⁸ and relative standard deviation as small as ∼13%. Robust calibration curves were obtained from the SERS data, which demonstrates the potential for the quantification analysis. Moreover, the powder shows extraordinary SERS stability than the conventional Ag nanostructures, which makes long term storage and convenient usage feasible. With all of these advantages, the porous SERS powder material can be extended to on-site SERS "nose" applications such as liquid and gas detections for chemical analysis, environmental monitoring, and anti-terrorism.

Cyclodextrins and inorganic nanoparticles: Another tale of synergy

In this review, we summarize the recent research focused on the combination of inorganic nanoparticles and α-, β- and γ- cyclodextrins. Our intention is to highlight the most relevant publications on the synthesis of nanoparticle-cyclodextrin (NP-CD) nanohybrids, with CDs acting as reducing agents or through the post-synthetic modification of inorganic nanoparticles with CDs. We also discuss the new or enhanced properties that arise from the host-guest capabilities of the CDs and inorganic nanoparticles. Finally, we illustrate the potential applications of these materials in numerous research fields.

Ratiometric Sensing of Polycyclic Aromatic Hydrocarbons Using Capturing Ligand Functionalized Mesoporous Au Nanoparticles as a Surface-Enhanced Raman Scattering Substrate

The absorption behavior between plasmonic nanostructures and a target molecule plays key roles in effective surface-enhanced Raman scattering (SERS) detection. However, for analytes with low surface affinity to the metallic surface, e.g., polycyclic aromatic hydrocarbons (PAHs), it remains challenging to observe the enhanced Raman signal. In this work, we reported a ratiometric SERS strategy for sensitive PAH detection through the surface functionalization of 3D ordered mesoporous Au nanoparticles (meso-Au NPs). By employing mono-6-thio-β-cyclodextrin (HS-β-CD) as capture ligands, the hydrophobic molecules, e.g., anthracene, could be effectively absorbed on the meso-Au NP surface via a host-guest interaction. Besides, a hydrophobic slippery surface is used as a concentrator to deliver and enrich the Au/analyte droplets into a small area. Consequently, the detection limits of anthracene and naphthalene are down to 1 and 10 ppb. The improved SERS enhancement is mainly ascribed to the host-guest effect of HS-β-CD ligands, large surface area and high-density of sub-10 nm mesopores of Au networks, as well as the enrichment effect of hydrophobic slippery surface. Moreover, the HS-β-CD (480 cm^-1 band) could serve as an internal standard, leading to the ratiometric determination of anthracene ranging from 1 ppm to 1 ppb. The proposed surface modification strategy in combination with the hydrophobic slippery surface shows great potential for active capture and trace detection of persistent organic pollutants in real-world SERS applications.

Trace detection of polycyclic aromatic hydrocarbons in environmental waters by SERS

Polycyclic aromatic hydrocarbons (PAHs) are among the most hazardous pollutants and have attracted significant attention in the last decades. Up to now, rapid and on-site trace detection of PAHs remains a challenging issue. Here, taking advantage of the high sensitivity and reliable qualification of Surface-enhanced Raman Spectroscopy (SERS), we firstly carried out trace analyses of 16 typical PAHs in water at concentrations as low as 100-0.1 μg/L, depending on the number of aromatic rings of the molecule. Furthermore, owing to the simplicity of the liquid-liquid extraction (LLE) step, the sensitivity was further improved 2-3 orders of magnitude, and the lowest detectable concentrations were 100, 50, and 5 ng/L for anthracene, pyrene, and benzo[a]pyrene (the three PAHs typically found in heavily polluted waters), respectively. The LLE-SERS approach was successfully applied to the qualitative and quantitative analyses of different (ocean and coast) water samples being spiked by these three PAHs, which showed great promise as a trace detection tool of PAHs under water environments having different contaminant matrices.

Breaking the Affinity Limit with Dual-Phase-Accessible Hotspot for Ultrahigh Raman Scattering of Nonadsorptive Molecules

For surface-enhanced Raman scattering (SERS) analysis, only analytes that can be absorbed spontaneously onto a noble metal surface can be detected effectively. Therefore, getting nonadsorptive molecules close enough to the surface has always been a key challenge in SERS analysis. Here absorbance measurements show that the liquid-interfacial array (LIA) does not adsorb or enrich benzopyrene (Bap) molecules, which lack effective functional groups that can interact with the noble metal surfaces. But the SERS intensity of 0.1 ppm Bap on the LIA is 10 times larger than that of 10 ppm Bap on traditional solid substrate, i.e., 3 orders of magnitude of enhancement. The LIA overcomes the restriction of affinity between Bap molecules and the metal surface, and the Bap molecules can easily enter nanogaps without steric hindrance. Furthermore, both adsorptive and nonadsorptive molecules were used to observe the SERS enhancement behavior on the LIA platforms. In multiple detection, competitive SERS signal changes could be observed between adsorptive and nonadsorptive molecules or between nonadsorptive and nonadsorptive molecules. A theoretical scheme was profiled for localized surface plasmon resonance (SPR) properties of the LIA. Finite difference-time domain (FDTD) simulation shows that the LIAs have biphasic and accessible asymmetric hotspots, and the electric field enhancement in the CHCl₃ (O) phase is approximately four times larger than that of the water (W) phase. In addition, the position and relative strength of the electromagnetic field depend on the spatial position of gold nanoparticles (GNPs) relative to the liquid-liquid interface (LLI), i.e., when the GNP dimer is completely immersed in a certain phase, the electromagnetic field enhancement of the CHCl₃ phase is approximately 7 times larger than that of the W phase. We speculate that dual-phase-accessible hotspots and the hydrophobic environment provided by CHCl₃ are two important factors contributing to successful detection of four common polycyclic aromatic hydrocarbons (PAHs) with a detection limit of 10 ppb. Finally, the LIA platform successfully realizes simultaneous detection of multiple PAHs in both plant and animal oils with good stability. This study provides a new direction for the development of high-efficiency and practical SERS technology for nonadsorptive molecules.

Silver-nanoparticles/graphene hybrids for effective enrichment and sensitive SERS detection of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are one of the most widespread and dangerous group of pollutants existing in the environment. Trace detection of PAHs is essential and important. Surface-enhanced Raman scattering (SERS) is a powerful analytical tool for ultrasensitive chemical analysis. However, the direct detection of PAHs by SERS is difficult due to poor affinity of PAHs to metal surfaces. In this work, we present a SERS platform based on the Ag-nanoparticles/graphene hybrid for the direct detection of PAHs with graphene as PAHs assemblies. The target PAHs are captured by the graphene through π-π electronic stacking, and brought close to the hot spots generated by dense Ag-nanoparticles decorated on the graphene. Sensitive detection of PAHs has been realized using this SERS substrate without further surface modification. The limit of detection for the three typical PAHs including pyrene, anthracene and phenanthrene was as low as 0.73 ppb, 1.1 ppb and 0.57 ppb, respectively. Our results indicate that the immobilization of PAHs on graphene is a process that can be applied in the design of sensitive sensors for these aromatic pollutants. This functional SERS sensor shows a great potential application in food safety inspection and environment pollutants monitoring.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Inhibiting Analyte Theft in Surface-Enhanced Raman Spectroscopy Substrates: Subnanomolar Quantitative Drug Detection

Quantitative applications of surface-enhanced Raman spectroscopy (SERS) often rely on surface partition layers grafted to SERS substrates to collect and trap-solvated analytes that would not otherwise adsorb onto metals. Such binding layers drastically broaden the scope of analytes that can be probed. However, excess binding sites introduced by this partition layer also trap analytes outside the plasmonic “hotspots”. We show that by eliminating these binding sites, limits of detection (LODs) can effectively be lowered by more than an order of magnitude. We highlight the effectiveness of this approach by demonstrating quantitative detection of controlled drugs down to subnanomolar concentrations in aqueous media. Such LODs are low enough to screen, for example, urine at clinically relevant levels. These findings provide unique insights into the binding behavior of analytes, which are essential when designing high-performance SERS substrates.

Surface-enhanced Raman scattering-based detection of hazardous chemicals in various phases and matrices with plasmonic nanostructures

Surface-enhanced Raman scattering (SERS)-based sensors utilize the electromagnetic-field enhancement of plasmonic substrates with the chemical specificity of vibrational Raman spectroscopy to identify trace amounts of a wide variety of different target analytes while being minimally affected by photobleaching. However, despite many advantageous features of this method, SERS sensors, particularly for detecting hazardous chemicals, suffer from several limitations such as requirement of gigantic signal enhancement that is often poorly controllable, subtle change and degradation of the SERS substrate, consecutive fluctuation of the signal, the lack of reliable receptors for capturing targets of interest and the absence of general principles for detecting various chemicals in different phases and matrices. To overcome these limitations and for SERS sensors to find practical use, one must (1) acknowledge the characteristics of the matrices of target systems, (2) finely engineer and tune the receptors of the SERS sensor to properly extract the target analyte from the phase, and (3) implement additional mechanistic modifications to enhance the plasmonic signal. This minireview underlines the difficulties associated with different phases and a wide range of target analytes, and introduces the practical measures undertaken to overcome the respective difficulties in SERS-based detection of hazardous chemicals.

CTAB-triggered Ag aggregates for reproducible SERS analysis of urinary polycyclic aromatic hydrocarbon metabolites

We have demonstrated a simple SERS assay for urinary hydroxylated polycyclic aromatic hydrocarbons (OH-PAHs) with high sensitivity and reproducibility.

Sensitive detection of polycyclic aromatic hydrocarbons with gold colloid coupled chloride ion SERS sensor

Highly sensitive detection of PAH by non-functionally modified gold colloid was realized by chloride ion coupling.

Optical Biosensors for Label-Free Detection of Small Molecules

Label-free optical biosensors are an intriguing option for the analyses of many analytes, as they offer several advantages such as high sensitivity, direct and real-time measurement in addition to multiplexing capabilities. However, development of label-free optical biosensors for small molecules can be challenging as most of them are not naturally chromogenic or fluorescent, and in some cases, the sensor response is related to the size of the analyte. To overcome some of the limitations associated with the analysis of biologically, pharmacologically, or environmentally relevant compounds of low molecular weight, recent advances in the field have improved the detection of these analytes using outstanding methodology, instrumentation, recognition elements, or immobilization strategies. In this review, we aim to introduce some of the latest developments in the field of label-free optical biosensors with the focus on applications with novel innovations to overcome the challenges related to small molecule detection. Optical label-free methods with different transduction schemes, including evanescent wave and optical fiber sensors, surface plasmon resonance, surface-enhanced Raman spectroscopy, and interferometry, using various biorecognition elements, such as antibodies, aptamers, enzymes, and bioinspired molecularly imprinted polymers, are reviewed.

Synthesis of Spiked Plasmonic Nanorods with an Interior Nanogap for Quantitative Surface-Enhanced Raman Scattering Analysis

Realizing quantitative surface-enhanced Raman scattering (SERS) analysis is extremely helpful and challenging. Here, we utilize a facile method to synthesize spiked plasmonic nanorods with an interior gap. The Raman signal from the molecules embedded in the gap can be dramatically enhanced, leading to strong, stable, and reproducible SERS signals that can be used as an internal reference for quantitative SERS analysis. We demonstrate that the rough exterior surface has a good performance in enhancing the Raman signal of polycyclic aromatic hydrocarbon molecules adsorbed on the surface. The result shows that this method is applicable for a large range of analyte concentrations and there is an excellent linear relationship between the SERS intensity ratio and the analyte concentration (0.5-100 μM).

Molecular Affinity Agents for Intrinsic Surface-Enhanced Raman Scattering (SERS) Sensors

Research at the interface of synthetic materials, biochemistry, and analytical techniques has enabled sensing platforms for applications across many research communities. Herein we review the materials used as affinity agents to create surface-enhanced Raman spectroscopy (SERS) sensors. Our scope includes those affinity agents (antibody, aptamer, small molecule, and polymer) that facilitate the intrinsic detection of targets relevant to biology, medicine, national security, environmental protection, and food safety. We begin with an overview of the analytical technique (SERS) and considerations for its application as a sensor. We subsequently describe four classes of affinity agents, giving a brief overview on affinity, production, attachment chemistry, and first uses with SERS. Additionally, we review the SERS features of the affinity agents, and the analytes detected by intrinsic SERS with that affinity agent class. We conclude with remarks on affinity agent selection for intrinsic SERS sensing platforms.

Applications of SERS in the Detection of Stress-Related Substances

A wide variety of biotic and abiotic stresses continually attack plants and animals, which adversely affect their growth, development, reproduction, and yield realization. To survive under stress conditions, highly sophisticated and efficient tolerance mechanisms have been evolved to adapt to stresses, which consist of the variation of effector molecules playing vital roles in physiological regulation. The development of a sensitive, facile, and rapid analytical methods for stress factors and effector molecules detection is significant for gaining deeper insight into the tolerance mechanisms. As a nondestructive analysis technique, surface-enhanced Raman spectroscopy (SERS) has unique advantages regarding its biosensing applications. It not only provides specific fingerprint spectra of the target molecules, conformation, and structure, but also has universal capacity for simultaneous detection and imaging of targets owing to the narrow width of the Raman vibrational bands. Herein, recent progress on biotic and abiotic stresses, tolerance mechanisms and effector molecules is summarized. Moreover, the development and promising future trends of SERS detection for stress-related substances combined with nanomaterials as substrates and SERS tags are discussed. This comprehensive and critical review might shed light on a new perspective for SERS applications.

SERS Sensors: Recent Developments and a Generalized Classification Scheme Based on the Signal Origin

Owing to its extreme sensitivity and easy execution, surface-enhanced Raman spectroscopy (SERS) now finds application for a wide variety of problems requiring sensitive and targeted analyte detection. This widespread application has prompted a proliferation of different SERS-based sensors, suggesting the need for a framework to classify existing methods and guide the development of new techniques. After a brief discussion of the general SERS modalities, we classify SERS-based sensors according the origin of the signal. Three major categories emerge from this analysis: surface-affinity strategy, SERS-tag strategy, and probe-mediated strategy. For each case, we describe the mechanism of action, give selected examples, and point out general misconceptions to aid the construction of new devices. We hope this review serves as a useful tutorial guide and helps readers to better classify and design practical and effective SERS-based sensors.

Microfluidic Diatomite Analytical Devices for Illicit Drug Sensing with ppb-Level Sensitivity

The escalating research interests in porous media microfluidics, such as microfluidic paper-based analytical devices, have fostered a new spectrum of biomedical devices for point-of-care (POC) diagnosis and biosensing. In this paper, we report microfluidic diatomite analytical devices (μDADs), which consist of highly porous photonic crystal biosilica channels, as an innovative lab-on-a-chip platform to detect illicit drugs. The μDADs in this work are fabricated by spin-coating and tape-stripping diatomaceous earth on regular glass slides with cross section of 400×30µm². As the most unique feature, our μDADs can simultaneously perform on-chip chromatography to separate small molecules from complex biofluidic samples and acquire the surface-enhanced Raman scattering spectra of the target chemicals with high specificity. Owing to the ultra-small dimension of the diatomite microfluidic channels and the photonic crystal effect from the fossilized diatom frustules, we demonstrate unprecedented sensitivity down to part-per-billion (ppb) level when detecting pyrene (1ppb) from mixed sample with Raman dye and cocaine (10 ppb) from human plasma. This pioneering work proves the exclusive advantage of μDADs as emerging microfluidic devices for chemical and biomedical sensing, especially for POC drug screening.

Investigation of aromatic hydrocarbon inclusion into cyclodextrins by Raman spectroscopy and thermal analysis

Among various cavitand molecules, cyclodextrins are extensively studied due to their ability to form host-guest complexes with small hydrophobic molecules. Aiming to explore cyclodextrin implementation on the scopes related to the environmental pollution monitoring or remediation, extensive studies for understanding the cyclodextrin-based host-guest complex formation with selected targeted substances are conducted. In this context, two polycyclic aromatic hydrocarbons, naphthalene and fluoranthene as well as toluene as a member of volatile organic compounds, were studied regarding their ability to encapsulate into cyclodextrin cavities. Synthesised complexes were examined by thermogravimetric analysis combined with Raman spectroscopy. The obtained results demonstrated that the size between targeted molecules and the cyclodextrin cavities strongly correlates with its ability to engage in complexation. Thus, this latter parameter plays an important role in the inclusion complex formation as well as in the strength of the interaction between the molecules.

Plasmonic nanoparticles-decorated diatomite biosilica: extending the horizon of on-chip chromatography and label-free biosensing

Diatomite consists of fossilized remains of ancient diatoms and is a type of naturally abundant photonic crystal biosilica with multiple unique physical and chemical functionalities. In this paper, we explored the fluidic properties of diatomite as the matrix for on-chip chromatography and, simultaneously, the photonic crystal effects to enhance the plasmonic resonances of metallic nanoparticles for surface-enhanced Raman scattering (SERS) biosensing. The plasmonic nanoparticle-decorated diatomite biosilica provides a lab-on-a-chip capability to separate and detect small molecules from mixture samples with ultra-high detection sensitivity down to 1 ppm. We demonstrate the significant potential for biomedical applications by screening toxins in real biofluid, achieving simultaneous label-free biosensing of phenethylamine and miR21cDNA in human plasma with unprecedented sensitivity and specificity. To the best of our knowledge, this is the first time demonstration to detect target molecules from real biofluids by on-chip chromatography-SERS techniques.

Weakening Circular Dichroism of Plasmonic Nanospirals Induced by Surface Grafting with Alkyl Ligands

Silver nanospirals with strong chiroptical activity (characterized by circular dichroism) are grafted with achiral alkyl ligands, resulting in a weakening of the chiroptical activity. The chiroptical weakening is exacerbated with increasing bond energy of the Ag-ligand contacts, which is ascribed to the effective medium screening effect and electron withdrawal toward the alkyl ligands.

Ag Nanoparticle-Functionalized Open-Ended Freestanding TiO₂ Nanotube Arrays with a Scattering Layer for Improved Energy Conversion Efficiency in Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) were fabricated using open-ended freestanding TiO₂ nanotube arrays functionalized with Ag nanoparticles (NPs) in the channel to create a plasmonic effect, and then coated with large TiO₂ NPs to create a scattering effect in order to improve energy conversion efficiency. Compared to closed-ended freestanding TiO₂ nanotube array-based DSSCs without Ag or large TiO₂ NPs, the energy conversion efficiency of closed-ended DSSCs improved by 9.21% (actual efficiency, from 5.86% to 6.40%) with Ag NPs, 6.48% (actual efficiency, from 5.86% to 6.24%) with TiO₂ NPs, and 14.50% (actual efficiency, from 5.86% to 6.71%) with both Ag NPs and TiO₂ NPs. By introducing Ag NPs and/or large TiO₂ NPs to open-ended freestanding TiO₂ nanotube array-based DSSCs, the energy conversion efficiency was improved by 9.15% (actual efficiency, from 6.12% to 6.68%) with Ag NPs and 8.17% (actual efficiency, from 6.12% to 6.62%) with TiO₂ NPs, and by 15.20% (actual efficiency, from 6.12% to 7.05%) with both Ag NPs and TiO₂ NPs. Moreover, compared to closed-ended freestanding TiO₂ nanotube arrays, the energy conversion efficiency of open-ended freestanding TiO₂ nanotube arrays increased from 6.71% to 7.05%. We demonstrate that each component-Ag NPs, TiO₂ NPs, and open-ended freestanding TiO₂ nanotube arrays-enhanced the energy conversion efficiency, and the use of a combination of all components in DSSCs resulted in the highest energy conversion efficiency.

β-CD Dimer-immobilized Ag Assembly Embedded Silica Nanoparticles for Sensitive Detection of Polycyclic Aromatic Hydrocarbons

We designed a β-CD dimer on silver nanoparticles embedded with silica nanoparticles (Ag@SiO₂ NPs) structure to detect polycyclic aromatic hydrocarbons (PAHs). Silica NPs were utilized as a template for embedding silver NPs to create hot spot structures and enhance the surface-enhanced Raman scattering (SERS) signal, and a thioether-bridged dimeric β-CD was immobilized on Ag NPs to capture PAHs. The assembled Ag NPs on silica NPs were confirmed by TEM and the presence of β-CD dimer on Ag@SiO₂ was confirmed by UV-vis and attenuated total reflection-Fourier transform infrared spectroscopy. The β-CD dimer@Ag@SiO₂ NPs were used as SERS substrate for detecting perylene, a PAH, directly and in a wide linearity range of 10⁻⁷ M to 10⁻² M with a low detection limit of 10⁻⁸ M. Also, the β-CD dimer@Ag@SiO₂ NPs exhibited 1000-fold greater sensitivity than Ag@SiO₂ NPs in terms of their perylene detection limit. Furthermore, we demonstrated the possibility of detecting various PAH compounds using the β-CD dimer@Ag@SiO₂ NPs as a multiplex detection tool. Various PAH compounds with the NPs exhibited their distinct SERS bands by the ratio of each PAHs. This approach of utilizing the assembled structure and the ligands to recognize target has potential for use in sensitive analytical sensors.

γ-Cyclodextrin capped silver nanoparticles for molecular recognition and enhancement of antibacterial activity of chloramphenicol

Computational studies were conducted to identify the favourable formation of the inclusion complex of chloramphenicol with cyclodextrins. The results of molecular docking and molecular dynamics predicted the strongest interaction of chloramphenicol with γ-cyclodextrin. Further, the inclusion complex of chloramphenicol with γ-cyclodextrin was experimentally prepared and a phenomenon of inclusion was verified by using different characterization techniques such as thermogravimetric analysis, differential scanning calorimetry, (1)H nuclear magnetic resonance (NMR) and two dimensional nuclear overhauser effect spectroscopy (NOESY) experiments. From these results it was concluded that γ-cyclodextrins could be an appropriate cyclodextrin polymer which can be used to functionalize chloramphenicol on the surface of silver nanoparticles. In addition, γ-cyclodextrin capped silver nanoparticles were synthesized and characterized using UV-visible spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR) and zeta potential analysis. Molecular recognition of chloramphenicol by these cyclodextrin capped silver nanoparticles was confirmed by surface enhanced raman spectroscopy (SERS) experiments. Synergistic antibacterial effect of chloramphenicol with γ-cyclodextrin capped silver nanoparticles was evaluated against Pseudomonas aeruginosa (ATCC 27853), Enterococcus faecalis (ATCC 5129), Klebsiella pneumoniae (ATCC 700603) and Staphylococcus aureus (ATCC 43300). The results from the antibacterial experiment were favourable thus allowing us to conclude that the approach of modifying organic drug molecules with cyclodextrin capped inorganic silver nanoparticles could help to enhance the antibacterial activity of them.

Synthesis and application of colloidal beta-cyclodextrin-decorated silver nanoparticles for rapid determination of malachite green in environmental water using surface-enhanced Raman spectroscopy

A series of AgNPs were synthesized by silver mirror reaction in the presence of CDs. Combined with SERS, a rapid method for the determination of MG was established successfully.

Bodipy recognizes polyaromatic hydrocarbons via C–H⋯F type weak H-bonding

Polycyclic aromatic hydrocarbons (PAHs) demonstrated unusual weak C–H⋯F type H-bonding interaction with meso-substituted Bodipy dyes (1–3) in ethanol medium.