Sustainable Valorization of Rice Straw into Biochar and Carbon Dots Using a Novel One-Pot Approach for Dual Applications in Detection and Removal of Lead Ions

Lead (Pb) is a highly toxic heavy metal that causes significant health hazards and environmental damage. Thus, the detection and removal of Pb2+ ions in freshwater sources are imperative for safeguarding public health and the environment. Moreover, the transformation of single resources into multiple high-value products is vital for achieving sustainable development goals (SDGs). In this regard, the present work focused on the preparation of two efficient materials, i.e., biochar (R-BC) and carbon dots (R-CDs) from a single resource (rice straw), via a novel approach by using extraction and hydrothermal process. The various microscopic and spectroscopy techniques confirmed the formation of porous structure and spherical morphology of R-BC and R-CDs, respectively. FTIR analysis confirmed the presence of hydroxyl (-OH), carboxyl (-COO) and amine (N-H) groups on the R-CDs' surface. The obtained blue luminescent R-CDs were employed as chemosensors for the detection of Pb2+ ions. The sensor exhibited a strong linear correlation over a concentration range of 1 µM to 100 µM, with a limit of detection (LOD) of 0.11 µM. Furthermore, the BET analysis of R-BC indicated a surface area of 1.71 m2/g and a monolayer volume of 0.0081 cm3/g, supporting its adsorption potential for Pb2+. The R-BC showed excellent removal efficiency of 77.61%. The adsorption process followed the Langmuir isotherm model and second-order kinetics. Therefore, the dual use of rice straw-derived provides a cost-effective, environmentally friendly solution for Pb2+ detection and remediation to accomplish the SDGs.

Mo(vi) complexes of amide-imine conjugates for tuning the selectivity of fluorescence recognition of Y(iii) vs. Pb(ii)

Two amide-imine conjugates, viz. 3-methyl-benzoic acid (4-diethylamino-2-hydroxy-benzylidene)-hydrazide (L1) and 3-methyl-benzoic acid (2-hydroxy-naphthalen-1-ylmethylene)-hydrazide (L2), have been prepared and used for a further synthesis of Mo(vi) complexes (M1 and M2, respectively). Single crystal X-ray diffraction analysis confirmed their structures. Interestingly, M1 selectively recognizes Y3+ and Pb2+ at two different wavelengths, whereas M2 selectively interacts with Y3+ with a significantly high binding constant, 1.3 × 105 M-1. The proposed sensing mechanism involves the displacement of Mo(vi) by Y3+/Pb2+ from respective Mo(vi) complexes. The TCSPC experiment also substantiates the "turn-on" fluorescence process. A logic gate has been constructed utilizing the fluorescence recognition of cations by M1. DFT studies corroborated the cation-probe interactions and allowed exploring the orbital energy parameters.

Review on application of perylene diimide (PDI)-based materials in environment: Pollutant detection and degradation

Environment pollution is getting serious and various poisonous contaminants with chemical durability, biotoxicity and bioaccumulation have been widespreadly discovered in municipal wastewaters and surface water. The detection and removal of pollutants show great significance for the protection of human health and other organisms. Due to its distinctive physical and chemical properties, perylene diimide (PDI) has received widespread attention from different research fields, especially in the area of environment. In this review, a comprehensive summary of the development of PDI-based materials in fluorescence detection and advanced oxidation technology for environment was introduced. Firstly, we chiefly presented the recent progress about the synthesis of PDI and PDI-based nanomaterials. Then, their application in fluorescence detection for environment was presented and categorized, principally including the detection of heavy metal ions, harmful anions and organic contaminants in the environment. In addition, the application of PDI and PDI-based materials in different advanced oxidation technologies for environment, such as photocatalysis, photoelectrocatalysis, Fenton and Fenton-like reaction and persulfate activation, was also summarized. At last, the challenges and future prospects of PDI-based materials in environmental applications were discussed. This review focuses on presenting the practical applications of PDI and PDI-based materials as fluorescent probes or catalysts (especially photocatalysts) in the detection of hazardous substances or catalytic elimination of organic contaminants. The contents are aimed at supplying the researchers with a deeper understanding of PDI and PDI-based materials and encouraging their further development in environmental applications.

Aggregation Induced Emissive Luminogens for Sensing of Toxic Elements

The major findings in the growing field of aggregation induced emissive (AIE) active materials for the detection of environmental toxic pollutants have been summarized and discussed in this Review article. Owing to the underlying photophysical phenomenon, fluorescent AIE active molecules show more impact on sensing applications. The major focus in current research efforts is on the development of AIE active materials such as TPE based organic fluorescent molecules, metal organic framework, and polymers that can be employed for the detection of toxic pollutants such as CN- , NO2- , Hg2+ , Cd2+ , As3+ , As5+ , F- , Pb2+ , Sb3+ ions.

A Fluorescence Resonance Energy Transfer Probe Based on DNA-Modified Upconversion and Gold Nanoparticles for Detection of Lead Ions

We report a new sensor for the specific detection of lead ions (Pb²⁺) in contaminated water based on fluorescence resonance energy transfer (FRET) between upconversion nanoparticles (UCNPs) as donors and gold nanoparticles (Au NPs) as receptors. The UCNPs modified with Pb²⁺ aptamers could bind to Au NPs, which were functionalized with complementary DNA through hybridization. The green fluorescence of UCNPs was quenched to a maximum rate of 80% due to the close proximity between the energy donor and the acceptor. In the presence of Pb²⁺, the FRET process was broken because Pb²⁺ induced the formation of G-quadruplexes from aptamers, resulting in unwound DNA duplexes and separated acceptors from donors. The fluorescence of UCNPs was restored, and the relative intensity had a significant linear correlation with Pb²⁺ concentration from 0 to 50 nM. The sensor had a detection limit as low as 4.1 nM in a buffer solution. More importantly, the sensor exhibited specific detection of Pb²⁺ in complex metal ions, demonstrating high selectivity in practical application. The developed FRET prober may open up a new insight into the specific detection of environmental pollution.

A dual functional probe for "turn-on" fluorescence response of Pb(2+) and colorimetric detection of Cu(2+) based on a rhodamine derivative in aqueous media

A dual functional probe L based on rhodamine was devised and synthesized. Probe L can sense Pb(2+) and Cu(2+) in aqueous solution through two approaches: a significant fluorescence enhancement caused by Pb(2+) and a visible color change from colorless to orchid induced by Cu(2+). Competitive experiments showed that probe L had high fluorescence sensitivity for Pb(2+) and excellent colorimetric selectivity for Cu(2+) over many environmentally relevant ions. The mechanisms of L for sensing Pb(2+) and Cu(2+) have been well demonstrated by ESI-MS, (1)H NMR titration, IR, the crystal structure of L-Pb(2+) and density functional theory calculation of L-Cu(2+). In addition, fluorescence image detection of Pb(2+) in living cells displayed an enhanced fluorescence effect.

Bifunctional magnetic-fluorescent nanoparticles: synthesis, characterization, and cell imaging

A new type of bifunctional magnetic-fluorescent Fe3O4@SiO2-PDI-PAA/Ca(2+) nanoparticles has been prepared by coating PDI-cored star polymers (PDI-PAA) onto the surface of Fe3O4@SiO2 core-shell nanostructures. The morphology and properties of the composite nanoparticles are investigated by transmission electron microscopy, ultraviolet-visible spectrometry, fluorescence spectrometry, and vibrating sample magnetometry. The composite nanoparticles display a strong red emission and superparamagnetic behavior at room temperature. The cell viability and uptake assays reveal good biocompatibility of these hybrid nanoparticles. Hence, the composite nanoparticles are of potential to be further explored as therapeutic vector in biomedical field.

Rh-catalysed direct cyclisation of 1,4-naphthoquinone and 9,10-phenanthraquinone with alkyne: facile access to 1,8-dioxapyrenes and 1,12-dioxaperylenes as orange and red-emitting luminophores

Rh-catalysed direct cyclisation of quinones with alkynes has been accomplished through C–H activation strategy.

Benzodithieno-imidazole based π-conjugated fluorescent polymer probe for selective sensing of Cu2+

A benzodithieno-imidazole based π-conjugated fluorescent polymer probe shows excellent selectivity towards Cu²⁺ions through fluorescence quenching.

Fluorometric sensing of Pb2+and CrO42−ions through host–guest inclusion for human lung cancer live cell imaging

The formation of an inclusion complex between 1,5-dihydroxyanthraquinone (1,5-DHAQ;1) and β-cyclodextrin (β-CD) in aqueous media has been studied by UV-visible and fluorescence spectroscopy.

Functionalization of cationic poly(p-phenylene ethynylene) with dendritic polyethylene enables efficient DNAzyme delivery for imaging Pb2+ in living cells

We report here an effective Pb²⁺-dependent DNAzyme (8-17 DNAzyme) delivery system based on the water-soluble dendritic polyethylene-cationic poly(p-phenylene ethynylene) for successfully imaging Pb²⁺ in living cells. For utilizing the 8-17 DNAzyme and its unique ability to catalyze a phosphodiester bond cleavage reaction in the presence of Pb²⁺, the distinctive conjugated polymer-based polyvalent nanocarrier design manages to load and transport 8-17 DNAzyme across cell membranes, and to realize the fluorescence imaging of Pb²⁺ in living cells. As shown by the confocal microscopy and flow cytometry observations, the fluorescence of Cy5.5 is obviously activated under the conditions of incubation with Pb²⁺, compared with the absence of Pb²⁺. Taken together, the study demonstrates the combination of the molecular-wire effect with "dendrimer effects" on their effective DNAzyme delivery and their cellular imaging Pb²⁺.

Photoproduced fluorescent Au(I)@(Ag2/Ag3)-thiolate giant cluster: an intriguing sensing platform for DMSO and Pb(II)

Synergistic evolution of fluorescent Au(I)@(Ag2/Ag3)-thiolate core-shell particles has been made possible under the Sun in presence of the respective precursor coinage metal compounds and glutathione (GSH). The green chemically synthesized fluorescent clusters are giant (∼600 nm) in size and robust. Among all the common water miscible solvents, exclusively DMSO exhibits selective fluorescence quenching (Turn Off) because of the removal of GSH from the giant cluster. Again, only Pb(II) ion brings back the lost fluorescence (Turn On) leaving aside all other metal ions. This happens owing to the strong affinity of the sulfur donor of DMSO for Pb(II). Thus, employing the aqueous solution containing the giant cluster, we can detect DMSO contamination in water bodies at trace level. Besides, a selective sensing platform has emerged out for Pb(II) ion with a detection limit of 14 × 10(-8) M. Pb(II) induced fluorescence recovery is again vanished by I(-) implying a promising route to sense I(-) ion.

A dual colorimetric and fluorescent sensor for lead ion based on naphthalene hydrazone derivative

A new compound, 2-boronobenzaldehyde-(2'-hydroxyl-4'-sulfonic acid) naphthalene hydrazone (1), was synthesized and its structure was characterized by proton nuclear magnetic resonance, mass and element analyses. The presence of Pb(2+) led 1 to undergo colorimetric and fluorescent changes, which were detectable with the naked eye. Thus, a dual spectral response for Pb(2+) detection was introduced. In KH2PO4-NaOH buffer aqueous solution (pH 6.0), 1 exhibited fluorescence enhancement at 568 nm and hyperchromicity at 595 nm upon the addition of Pb(2+). The fluorescent intensity change was proportionate to the concentration of Pb(2+) with a dynamic working range of 5.0×10(-7) mol L(-1) to 1.0×10(-4) mol L(-1) and a detection limit of 3.7×10(-8) mol L(-1). The fluorometric method was successfully applied for the detection of Pb(2+) water of Qianhu Lake and soil in Nanchang university campus. The recoveries were 111-116% for water and 97.6% for soil respectively, determined via the standard addition method.

A new bis(rhodamine)-based fluorescent chemosensor for Fe3+

A new bis(rhodamine)-based fluorescent probe 4 was synthesized, and it exhibited high selectivity for Fe³⁺ over other commonly coexistent metal ions in both 50% ethanol and Tris–HCl buffer. Upon the addition of Fe³⁺, the spirocyclic ring of 4 was opened and a significant enhancement of visible color and fluorescence in the range of 500–600 nm was observed.