High-reliability graphene-wrapped nanoprobes for scanning probe microscopy

The nanoprobe is a powerful tool in scanning probe microscopy (SPM) that is used to explore various fields of nanoscience. However, the tips can wear out very fast due to the low stability of conventional probes, especially after the measurement of high currents or lateral friction, which results in image distortion and test imprecision. Herein, a novel functional nanoprobe is presented using graphene sheets in a high-quality graphene solution wrapped round a plasma-treated conventional Pt-Ir coated nanoprobe, which shows highly stability and resistance to degradation, leading to a significantly increased lifetime. Furthermore, we show that the graphene-wrapped nanoprobes have the advantages of enhanced electrical conductivity and reduced tip-sample friction, compared with Pt-Ir coated nanoprobes. The simplicity and low cost of this method make it valuable to various functional graphene-wrapped nanoprobes and applications.

Visualization of Frontier Molecular Orbital Separation of a Single Thermally Activated Delayed Fluorescence Emitter by STM

Because the spatial distribution of frontier molecular orbitals (FMOs) regulates the thermally activated delayed fluorescence (TADF) property, researchers synthesize TADF emitters by designing their FMO distribution. However, it remains challenging to clarify how the FMO distribution is altered at molecular interfaces. Thus, visualizing the FMOs at molecular interfaces helps us to understand the working behavior of TADF emitters. Using scanning tunneling microscopy (STM), we investigated the electronic structure of a single TADF emitter, hexamethylazatriangulene-triazine, at molecule-metal and molecule-insulating film interfaces. FMOs at the molecule-metal interface were not spatially confined to the donor-acceptor moieties because of hybridization. Meanwhile, FMOs at the molecule-insulator interface exhibited spatially separated filled and empty states confined to each moiety, similar to the calculated gas-phase FMOs. These observations illustrate that the molecule-environment interaction alters the spatial distribution of FMOs, proving that STM is a powerful tool for studying TADF molecules.

Pushing the Limits of Acene Chemistry: The Recent Surge of Large Acenes

Acenes, consisting of linearly fused benzene rings, are an important fundamental class of organic compounds with various applications. Hexacene is the largest acene that was synthesized and isolated in the 20th century. The next largest member of the acene family, heptacene, was observed in 2007 and since then significant progress in preparing acenes has been reported. Significantly larger acenes, up to undecacene, could be studied by means of low-temperature matrix isolation spectroscopy with in situ photolytic generation, and up to dodecacene by means of on-surface synthesis employing innovative precursors and highly defined crystalline metal surfaces under ultrahigh vacuum conditions. The review summarizes recent experimental and theoretical advances in the area of acenes that give a significantly deeper insight into the fundamental properties and nature of the electronic structure of this fascinating class of organic compounds.

On-surface synthesis of graphene nanostructures with π-magnetism

Graphene nanostructures (GNs) including graphene nanoribbons and nanoflakes have attracted tremendous interest in the field of chemistry and materials science due to their fascinating electronic, optical and magnetic properties. Among them, zigzag-edged GNs (ZGNs) with precisely-tunable π-magnetism hold great potential for applications in spintronics and quantum devices. To improve the stability and processability of ZGNs, substitutional groups are often introduced to protect the reactive edges in organic synthesis, which renders the study of their intrinsic properties difficult. In contrast to the conventional wet-chemistry method, on-surface bottom-up synthesis presents a promising approach for the fabrication of both unsubstituted ZGNs and functionalized ZGNs with atomic precision via surface-catalyzed transformation of rationally-designed precursors. The structural and spin-polarized electronic properties of these ZGNs can then be characterized with sub-molecular resolution by means of scanning probe microscopy techniques. This review aims to highlight recent advances in the on-surface synthesis and characterization of a diversity of ZGNs with π-magnetism. We also discuss the important role of precursor design and reaction stimuli in the on-surface synthesis of ZGNs and their π-magnetism origin. Finally, we will highlight the existing challenges and future perspective surrounding the synthesis of novel open-shell ZGNs towards next-generation quantum technology.

Single-Particle Organolead Halide Perovskite Photoluminescence as a Probe for Surface Reaction Kinetics

Photoluminescence (PL) of organolead halide perovskites (OHPs) is sensitive to OHPs' surface conditions and is an effective way to report surface states. Literature has reported that at the ensemble level, the PL of photoexcited OHP nanorods declines under an inert nitrogen (N₂) atmosphere and recovers under subsequent exposure to oxygen (O₂). At the single-particle level, we observed that OHP nanorods photoblink at rates dependent on both the excitation intensity and the O₂ concentration. Combining the two sets of information with the charge-trapping/detrapping mechanism, we are able to quantitatively evaluate the interaction between a single surface defect and a single O₂ molecule using a new kinetic model. The model predicts that the photodarkening of OHP nanorods in the N₂ atmosphere has a different mechanism than conventional PL quenching, which we call photo-knockout. This model provides fundamental insights into the interactions of molecular O₂ with OHP materials and helps design a suitable OHP interface for a variety of applications in photovoltaics and optoelectronics.

Spin-Triplet-Mediated Up-Conversion and Crossover Behavior in Single-Molecule Electroluminescence

Scanning-tunneling-microscope-induced light emission serves as a powerful approach in revealing and manipulating the optical properties of molecular species, intermolecular energy transfer, and plasmon-molecule coupling. Earlier studies have established the existence of molecular up-conversion electroluminescence in diverse situations, but the underlying microscopic mechanisms are still under active debate, dominated by intermolecular triplet-triplet annihilation and plasmonic pumping. Here we report on the experimental realization of up-conversion electroluminescence from a prototypical single phthalocyanine molecule, allowing us to unambiguously rule out mechanisms based on intermolecular coupling and also offering unprecedented opportunities to elucidate much richer characteristics unforeseen in previous studies. In particular, the bias-dependent emission intensity displays three distinct regions with different nonlinear current dependences, which can be attributed to crossover behavior caused by the interplay between inelastic electron scattering and carrier-injection processes. We also develop a microscopic description to capture the essential physics involved in up-conversion electroluminescence mediated by a proper intermediate spin-triplet state.

Single-molecule photoredox catalysis

Photocatalytic dehalogenation by a common dyestuff under aqueous conditions is driven by energy-additive absorption of two photons on the single-molecule level.

The chemistry of life is founded on light, so is it appropriate to think of light as a chemical substance? Planck's quantization offers a metric analogous to Avogadro's number to relate the number of particles to an effective reaction of single molecules and photons to form a new compound. A rhodamine dye molecule serves as a dehalogenating photocatalyst in a consecutive photoelectron transfer (conPET) process which adds the energy of two photons, with the first photon inducing radical formation and the second photon triggering PET to the substrate molecule. Rather than probing catalytic heterogeneity and dynamics on the single-molecule level, single-photon synthesis is demonstrated: the light quantum constitutes a reactant for the single substrate molecule in a dye–driven reaction. The approach illustrates that molecular diffusion and excited-state internal conversion are not limiting factors in conPET reaction kinetics because of catalyst–substrate preassociation. The effect could be common to photoredox catalysis, removing the conventional requirement of long excited-state lifetimes.

Two-Dimensional Band Structure in Honeycomb Metal-Organic Frameworks

Two-dimensional (2D) metal-organic frameworks (MOFs) have been recently proposed as a flexible material platform for realizing exotic quantum phases including topological and anomalous quantum Hall insulators. Experimentally, direct synthesis of 2D MOFs has been essentially confined to metal substrates, where the strong interaction with the substrate masks the intrinsic electronic properties of the MOF. In addition to electronic decoupling from the underlying metal support, synthesis on weakly interacting substrates (e.g., graphene) would enable direct realization of heterostructures of 2D MOFs with inorganic 2D materials. Here, we demonstrate synthesis of 2D honeycomb MOFs on epitaxial graphene substrate. Using low-temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM) complemented by density-functional theory (DFT) calculations, we show the formation of a 2D band structure in the MOF decoupled from the substrate. These results open the experimental path toward MOF-based designer electronic materials with complex, engineered electronic structures.

Mapping the Conductance of Electronically Decoupled Graphene Nanoribbons

With the advent of atomically precise synthesis and consequent precise tailoring of their electronic properties, graphene nanoribbons (GNRs) have emerged as promising building blocks for nanoelectronics. Before being applied as such, it is imperative that their charge transport properties are investigated. Recently, formation of a molecular junction through the controlled attachment of nanoribbons to the probe of a scanning tunneling microscope (STM) and subsequent lifting allowed for the first conductance measurements. Drawbacks are the perturbation of the intrinsic electronic properties through interaction with the metal surface, as well as the risk of current-induced defect formation which largely restricts the measurements to low bias voltages. Here, we show that resonant transport-essential for device applications-can be measured by lifting electronically decoupled GNRs from an ultrathin layer of NaCl. By varying the applied voltage and tip-sample distance, we can probe resonant transport through frontier orbitals and its dependence on junction length. This technique is used for two distinct types of GNRs: the 7 atom wide armchair GNR and the 3,1-chiral GNR. The features in the conductance maps can be understood and modeled in terms of the intrinsic electronic properties of the ribbons as well as capacitive coupling to tip and substrate. We demonstrate that we can simultaneously measure the current decay with increasing junction length and bias voltage by using a double modulation spectroscopy technique. The strategy described in this work is widely applicable and will lead to a better understanding of electronic transport through molecular junctions in general.

High resolution SPM imaging of organic molecules with functionalized tips

One of the most remarkable and exciting achievements in the field of scanning probe microscopy (SPM) in the last years is the unprecedented sub-molecular resolution of both atomic and electronic structures of single molecules deposited on solid state surfaces. Despite its youth, the technique has already brought many new possibilities to perform different kinds of measurements, which cannot be accomplished by other techniques. This opens new perspectives in advanced characterization of physical and chemical processes and properties of molecular structures on surfaces. Here, we discuss the history and recent progress of the high resolution imaging with a functionalized probe by means of atomic force microscopy (AFM), scanning tunnelling microscopy (STM) and inelastic electron tunneling spectroscopy (IETS). We describe the mechanisms responsible for the high-resolution AFM, STM and IETS-STM contrast. The complexity of this technique requires new theoretical approaches, where a relaxation of the functionalized probe is considered. We emphasise the similarities of the mechanism driving high-resolution SPM with other imaging methods. We also summarise briefly significant achievements and progress in different branches. Finally we provide brief perspectives and remaining challenges of the further refinement of these high-resolution methods.

Molecular assembly on two-dimensional materials

Molecular self-assembly is a well-known technique to create highly functional nanostructures on surfaces. Self-assembly on two-dimensional (2D) materials is a developing field driven by the interest in functionalization of 2D materials in order to tune their electronic properties. This has resulted in the discovery of several rich and interesting phenomena. Here, we review this progress with an emphasis on the electronic properties of the adsorbates and the substrate in well-defined systems, as unveiled by scanning tunneling microscopy. The review covers three aspects of the self-assembly. The first one focuses on non-covalent self-assembly dealing with site-selectivity due to inherent moiré pattern present on 2D materials grown on substrates. We also see that modification of intermolecular interactions and molecule-substrate interactions influences the assembly drastically and that 2D materials can also be used as a platform to carry out covalent and metal-coordinated assembly. The second part deals with the electronic properties of molecules adsorbed on 2D materials. By virtue of being inert and possessing low density of states near the Fermi level, 2D materials decouple molecules electronically from the underlying metal substrate and allow high-resolution spectroscopy and imaging of molecular orbitals. The moiré pattern on the 2D materials causes site-selective gating and charging of molecules in some cases. The last section covers the effects of self-assembled, acceptor and donor type, organic molecules on the electronic properties of graphene as revealed by spectroscopy and electrical transport measurements. Non-covalent functionalization of 2D materials has already been applied for their application as catalysts and sensors. With the current surge of activity on building van der Waals heterostructures from atomically thin crystals, molecular self-assembly has the potential to add an extra level of flexibility and functionality for applications ranging from flexible electronics and OLEDs to novel electronic devices and spintronics.

Exploring site-specific chemical interactions at surfaces: a case study on highly ordered pyrolytic graphite

A material's ability to interact with approaching matter is governed by the structural and chemical nature of its surfaces. Tailoring surfaces to meet specific needs requires developing an understanding of the underlying fundamental principles that determine a surface's reactivity. A particularly insightful case occurs when the surface site exhibiting the strongest attraction changes with distance. To study this issue, combined noncontact atomic force microscopy and scanning tunneling microscopy experiments have been carried out, where the evolution of the local chemical interaction with distance leads to a contrast reversal in the force channel. Using highly ordered pyrolytic graphite surfaces and metallic probe tips as a model system, we find that at larger tip-sample distances, carbon atoms exhibit stronger attractions than hollow sites while upon further approach, hollow sites become energetically more favorable. For the tunneling current that is recorded at large tip-sample separations during acquisition of a constant-force image, the contrast is dominated by the changes in tip-sample distance required to hold the force constant ('cross-talk'); at smaller separations the contrast turns into a convolution of this cross-talk and the local density of states. Analysis shows that the basic factors influencing the force channel contrast reversal are locally varying decay lengths and an onset of repulsive forces that occurs for distinct surface sites at different tip-sample distances. These findings highlight the importance of tip-sample distance when comparing the relative strength of site-specific chemical interactions.

Single-Molecule Rotational Switch on a Dangling Bond Dimer Bearing

One of the key challenges in the construction of atomic-scale circuits and molecular machines is to design molecular rotors and switches by controlling the linear or rotational movement of a molecule while preserving its intrinsic electronic properties. Here, we demonstrate both the continuous rotational switching and the controlled step-by-step single switching of a trinaphthylene molecule adsorbed on a dangling bond dimer created on a hydrogen-passivated Ge(001):H surface. The molecular switch is on-surface assembled when the covalent bonds between the molecule and the dangling bond dimer are controllably broken, and the molecule is attached to the dimer by long-range van der Waals interactions. In this configuration, the molecule retains its intrinsic electronic properties, as confirmed by combined scanning tunneling microscopy/spectroscopy (STM/STS) measurements, density functional theory calculations, and advanced STM image calculations. Continuous switching of the molecule is initiated by vibronic excitations when the electrons are tunneling through the lowest unoccupied molecular orbital state of the molecule. The switching path is a combination of a sliding and rotation motion over the dangling bond dimer pivot. By carefully selecting the STM conditions, control over discrete single switching events is also achieved. Combined with the ability to create dangling bond dimers with atomic precision, the controlled rotational molecular switch is expected to be a crucial building block for more complex surface atomic-scale devices.

Interaction of a conjugated polyaromatic molecule with a single dangling bond quantum dot on a hydrogenated semiconductor

Controlling the strength of the coupling between organic molecules and single atoms provides a powerful tool for tuning electronic properties of single-molecule devices. Here, using scanning tunneling microscopy and spectroscopy (STM/STS) supported by theoretical modeling, we study the interaction of a planar organic molecule (trinaphthylene) with a hydrogen-passivated Ge(001):H substrate and a single dangling bond quantum dot on that surface. The electronic structure of the molecule adsorbed on the hydrogen-passivated surface is similar to the gas phase structure and the measurements show that HOMO and LUMO states contribute to the STM filled and empty state images, respectively. Furthermore, we show that the electronic properties are not significantly affected when the molecule is attached to the single dangling bond, which is in contrast with the strong interaction of the molecule with a dangling bond dimer. Our results show that the dangling bond quantum dots could stabilize organic molecules on a hydrogenated semiconductor without affecting their originally designed gas phase electronic properties. Together with the ability to laterally manipulate the molecules on the surface, this will be advantageous in the construction of single-molecule devices, where the coupling and positioning of the molecules on the substrate could be tuned by a proper design of the surface quantum dot arrays, comprising both single and dimerized dangling bonds.

Ultra-narrow metallic armchair graphene nanoribbons

Graphene nanoribbons (GNRs)—narrow stripes of graphene—have emerged as promising building blocks for nanoelectronic devices. Recent advances in bottom-up synthesis have allowed production of atomically well-defined armchair GNRs with different widths and doping. While all experimentally studied GNRs have exhibited wide bandgaps, theory predicts that every third armchair GNR (widths of N=3m+2, where m is an integer) should be nearly metallic with a very small bandgap. Here, we synthesize the narrowest possible GNR belonging to this family (five carbon atoms wide, N=5). We study the evolution of the electronic bandgap and orbital structure of GNR segments as a function of their length using low-temperature scanning tunnelling microscopy and density-functional theory calculations. Already GNRs with lengths of 5 nm reach almost metallic behaviour with ∼100 meV bandgap. Finally, we show that defects (kinks) in the GNRs do not strongly modify their electronic structure.

Graphene nanoribbons have potential applications as nanoscale wires, though experimentally studied ribbons display wide bandgaps. Here, the authors synthesise the narrowest armchair graphene nanoribbon predicted to have metallic behaviour and show these ribbons—5 carbon atoms wide—indeed display almost metallic behaviour.

Origin of High-Resolution IETS-STM Images of Organic Molecules with Functionalized Tips

Recently, the family of high-resolution scanning probe imaging techniques using decorated tips has been complemented by a method based on inelastic electron tunneling spectroscopy (IETS). The new technique resolves the inner structure of organic molecules by mapping the vibrational energy of a single carbon monoxide (CO) molecule positioned at the apex of a scanning tunneling microscope (STM) tip. Here, we explain high-resolution IETS imaging by extending a model developed earlier for STM and atomic force microscopy (AFM) imaging with decorated tips. In particular, we show that the tip decorated with CO acts as a nanoscale sensor that changes the energy of its frustrated translation mode in response to changes of the local curvature of the surface potential. In addition, we show that high resolution AFM, STM, and IETS-STM images can deliver information about the charge distribution within molecules deposited on a surface. To demonstrate this, we extend our mechanical model by taking into account electrostatic forces acting on the decorated tip in the surface Hartree potential.

Critical assessment of the evidence for striped nanoparticles

There is now a significant body of literature which reports that stripes form in the ligand shell of suitably functionalised Au nanoparticles. This stripe morphology has been proposed to strongly affect the physicochemical and biochemical properties of the particles. We critique the published evidence for striped nanoparticles in detail, with a particular focus on the interpretation of scanning tunnelling microscopy (STM) data (as this is the only technique which ostensibly provides direct evidence for the presence of stripes). Through a combination of an exhaustive re-analysis of the original data, in addition to new experimental measurements of a simple control sample comprising entirely unfunctionalised particles, we show that all of the STM evidence for striped nanoparticles published to date can instead be explained by a combination of well-known instrumental artefacts, or by issues with data acquisition/analysis protocols. We also critically re-examine the evidence for the presence of ligand stripes which has been claimed to have been found from transmission electron microscopy, nuclear magnetic resonance spectroscopy, small angle neutron scattering experiments, and computer simulations. Although these data can indeed be interpreted in terms of stripe formation, we show that the reported results can alternatively be explained as arising from a combination of instrumental artefacts and inadequate data analysis techniques.

Suppression of electron-vibron coupling in graphene nanoribbons contacted via a single atom

Graphene nanostructures, where quantum confinement opens an energy gap in the band structure, hold promise for future electronic devices. To realize the full potential of these materials, atomic-scale control over the contacts to graphene and the graphene nanostructure forming the active part of the device is required. The contacts should have a high transmission and yet not modify the electronic properties of the active region significantly to maintain the potentially exciting physics offered by the nanoscale honeycomb lattice. Here we show how contacting an atomically well-defined graphene nanoribbon to a metallic lead by a chemical bond via only one atom significantly influences the charge transport through the graphene nanoribbon but does not affect its electronic structure. Specifically, we find that creating well-defined contacts can suppress inelastic transport channels.

Molecular self-assembly on graphene on SiO2 and h-BN substrates

One of the suggested ways of controlling the electronic properties of graphene is to establish a periodic potential modulation on it, which could be achieved by self-assembly of ordered molecular lattices. We have studied the self-assembly of cobalt phthalocyanines (CoPc) on chemical vapor deposition (CVD) grown graphene transferred onto silicon dioxide (SiO2) and hexagonal boron nitride (h-BN) substrates. Our scanning tunneling microscopy (STM) experiments show that, on both substrates, CoPc forms a square lattice. However, on SiO2, the domain size is limited by the corrugation of graphene, whereas on h-BN, single domain extends over entire terraces of the underlying h-BN. Additionally, scanning tunneling spectroscopy (STS) measurements suggest that CoPc molecules are doped by the substrate and that the level of doping varies from molecule to molecule. This variation is larger on graphene on SiO2 than on h-BN. These results suggest that graphene on h-BN is an ideal substrate for the study of molecular self-assembly toward controlling the electronic properties of graphene by engineered potential landscapes.