Substrate-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry of Some Small Biomolecules Using TiO2-Nanotubes: The Effect of Nanotube Diameter and Salt Addition

Substrate-assisted laser desorption/ionization (SALDI) is a kind of soft ionization method that is most suitable for the analysis of low molecular weight analytes when it is coupled with a time-of-flight mass spectrometer. Unlike the conventional matrix-assisted laser desorption/ionization, there is no interference in the SALDI with matrices for the low mass analyte peaks (m/z < 700). The focus of this work is to develop substrates based on nanomaterials to obtain higher sensitivity, better reproducibility, and easier preparation. The mass spectra of some small molecules (capecitabine, hemin, methadone, noscapine, oxycodone, thebaine, malathion, chlorpyrifos, ethion, permethrin, and phosalone) deposited on the TiO₂-nanotube (TiO₂-NTs) plate by the SALDI-TOF-MS technique are reported. The nanotubes are synthesized in different diameter sizes of nanotubes via the anodizing method. The intensity of the analyte peaks and the softness of ionization are optimized by varying the diameter of nanotubes and adding relevant alkali salts to the analytes. In addition, the reproducibility of the signal intensity of analytes is optimized by changing the surface hydrophilicity of the TiO₂-NT plate.

Surface-Assisted Laser Desorption/Ionization Imaging Mass Spectrometry (SALDI-IMS)-Based Detection of Vinca Alkaloids Distribution in the Petal of Madagascar Periwinkle

The surface-assisted laser desorption/ionization (SALDI) technique uses inorganic materials to aid desorption and ionization of molecules. SALDI is suitable for analyzing small molecules due to the absence of interfering signals in the low m/z range originating from the organic matrix. Imaging mass spectrometry (IMS) is a versatile imaging approach with high spatial resolution for analyzing various molecular species, but its application depends heavily on the ionization method. We have developed a functionalized titanium dioxide (TiO₂) nanowire as a solid substrate for SALDI-MS detection of low-molecular-weight molecules. We apply this novel substrate for imprinting fragile specimens such as petals and further SALDI-IMS analysis. The TiO₂ nanowire substrate is prepared from a commercial Ti plate by a hydrothermal process and subsequently chemically modified to improve the quality and selectivity of imprinting as well as the sensitivity of SALDI-IMS analysis. Here, the functionalized TiO₂ nanowire substrate is applied to visualize the distribution of vinca alkaloids in the petal of Madagascar periwinkle (Catharanthus roseus).

Inorganic Matrices Assisted Laser Desorption/Ionization Mass Spectrometry for Metabolic Analysis in Bio-fluids

Metabolic analysis in bio-fluids interprets the end products in the bio-process, emerging as an irreplaceable disease diagnosis and monitoring platform. Laser desorption/ionization mass spectrometry (LDI MS) based metabolic analysis exhibits great potential for clinical applications in terms of high throughput, rapid signal readout, and minimal sample preparation. There are two essential elements to construct the LDI MS-based metabolic analysis: 1) well-designed nanomaterials as matrices; 2) machine learning algorithms for data analysis. This review highlights the development of various inorganic matrices to comprehend the advantages of LDI MS in metabolite detection and the recent diagnostic applications based on target metabolite detection and untargeted metabolic fingerprints in biological fluids.

Laser Desorption/Ionization Mass Spectrometry as a Potential Tool for Evaluation of Hydroxylation Degree of Various Types of Titanium Dioxide Materials

For many applications, TiO₂ must have a unique surface structure responsible for its desirable physicochemical properties. Therefore the fast and easy methods of TiO₂ surface characterization are of great interest. Heated TiO₂ samples and dye-modified TiO₂ samples were analyzed by laser desorption/ionization mass spectrometry. In the negative ion mode, two types of ions were detected, namely (TiO₂)_n⁻ and (TiO₂)_nOH⁻. It has been established that the samples can be differentiated based on the relative ion abundances, especially with respect to the free hydroxyl group population. It indicates that laser desorption ionization mass spectrometry has the potential for the investigation of the surface properties of various TiO₂ materials.

TiN nanopillar-enhanced laser desorption and ionization of various analytes

The present paper reports on the use of TiN nanopillars as a robust analytical substrate for laser desorption/ionization mass spectrometry (LDI-MS). TiN nanopillars were fabricated on silicon wafers through the dynamic oblique deposition of titanium, followed by thermal treatment in an ammonia atmosphere. The TiN nanopillars were readily applicable to a simple "dried-droplet" method in the LDI-MS without surface modification or pre-treatment. A broad range of analytes were investigated, including a small drug molecule, a synthetic polymer, sugars, peptides, and proteins. Intact molecular signals were detected with low noise interference and no fragmentation. The developed TiN-nanopillar-based approach extends the applicable mass limit to 150 kDa (immunoglobulin G) and was able to detect trypsinogen (24 kDa) at levels as low as 50 fmol μL-1 with adequate shot-to-shot signal reproducibility. In addition, we carried out MS analysis on biomolecule-spiked human blood plasma and a mixture of standard samples to investigate the promise of the TiN nanopillars for clinical research. The experimental observations are validated using electromagnetic and heat-transfer simulations. The TiN nanopillars show a reduced reflection and exhibit surges in the TiN surface temperature upon irradiation with electromagnetic radiation. Localization of thermal energy at the tips of the TiN pillars is likely to be responsible for the superior LDI performance. Our results suggest that the development of nanostructured TiN substrates will contribute to the widespread implementation of nanostructured solid substrates for biomedical and clinical applications with simple processes.

Hybrid Surface Design of Organosilica Films for Laser Desorption/Ionization Mass Spectrometry: Low Free Energy Surface with Interactive Sites

Laser desorption/ionization mass spectrometry (LDI-MS) assisted by solid substrates is useful for the facile and rapid analysis of low-molecular-weight compounds. The LDI performance of solid substrates depends on not only a surface morphology but also the surface functionalities dominating the surface-analyte interactions. In this study, we propose a hybrid surface design for LDI substrates, realizing both weak surface-analyte interaction and homogeneous distribution of analytes. The hybrid surface consisted of a mixture of fluoroalkylsilane (FAS), SiO₂, and TiO₂ and was formed on organosilica substrates containing UV-laser-absorbing naphthalimide moieties. To investigate the surface interactions, the hybrid surface as well as conventional hydrophobic surfaces treated with FAS only were prepared on flat organosilica films. Contact angle measurements and surface free energy analysis showed that the hybrid surface exhibited the highest hydrophobicity, while the contribution of the polar and hydrogen bonding terms in the surface free energy was clearly observed. The organosilica film with the hybrid surface demonstrated significant LDI performance for the detection of biorelated compounds (e.g., peptides, phospholipids, and medicines), and a high detection ability was particularly observed for peptides. The substrate surface promoted the desorption/ionization of analytes through a low surface free energy and uniform distribution of the analytes due to the interactive sites. The hybrid surface design was then applied to a nanostructured organosilica substrate consisting of a base film and a nanoparticle layer. The signal intensity of a peptide was further improved approximately 3-fold owing to the increased surface area of the nanostructured substrate, and the limit of detection reached the subfemtomole order. Our hybrid surface design is expected to improve the LDI performance of various nanostructured solid substrates.

Visualizing vinca alkaloids in the petal of Catharanthus roseus using functionalized titanium oxide nanowire substrate for surface-assisted laser desorption/ionization imaging mass spectrometry

Imaging mass spectrometry (IMS) is a powerful technique that enables analysis of various molecular species at a high spatial resolution with low detection limits. In contrast to the matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) approach, surface-assisted laser desorption/ionization (SALDI) can be more effective in the detection of small molecules due to the absence of interfering background signals in low m/z ranges. We developed a functionalized TiO₂ nanowire as a solid substrate for IMS of low-molecular-weight species in plant tissues. We prepared TiO₂ nanowires using an inexpensive modified hydrothermal process and subsequently functionalized them chemically with various silane analogs to overcome the problem of superhydrophilicity of the substrate. Chemical modification changed the selectivity of imprinting of samples deposited on the substrate surface and thus improved the detection limits. The substrate was applied to image distribution of the metabolites in very fragile specimens such as the petal of Catharanthus roseus. We observed that the metabolites are distributed heterogeneously in the petal, which is consistent with previous results reported for the C. roseus plant leaf and stem. The intermediates corresponding to the biosynthesis pathway of some vinca alkaloids were clearly shown in the petal. We also performed profiling of petals from five different cultivars of C. roseus plant. We verified the semi-quantitative capabilities of the imprinting/imaging approach by comparing results using the LC-MS analysis of the plant extracts. This suggested that the functionalized TiO₂ nanowire substrate-based SALDI is a powerful technique complementary to MALDI-MS.

Size-selected silver nanoparticles for MALDI-TOF mass spectrometry of amyloid-beta peptides

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is one of the most efficient mass spectrometric techniques for the analysis of high-molecular-weight compounds with superior selectivity and sensitivity. Common MALDI matrices are low molecular weight (LMW) organics and will therefore produce a large amount of matrix-related ion peaks, which limits the use of MALDI-MS for the detection of LMW molecules. A major breakthrough of this limitation was made by the introduction of surface assisted desorption/ionization techniques, with graphite particles firstly as the matrix, followed by expansion into other types of nanoparticles or nanostructures. However, previous studies failed to address well the optimum size and concentration of Ag NPs to be used as the MALDI matrix. In this study, to explore and compare the efficiency of different sized silver nanoparticles (Ag NPs) as the MALDI matrix for the detection of LMW molecules, three different sized Ag NPs (2.8 ± 1.0, 12.8 ± 3.2 and 44.2 ± 5.0 nm) have been successfully developed as the MALDI time-of-flight MS (MALDI-TOF MS) matrix and amyloid-beta (Aβ) peptides, crucially involved in Alzheimer's disease and a variety of cancers, were chosen as an example of LMW molecules in our MALDI-TOF MS analysis with Ag NPs as matrices. The results showed size-selected MS signals with the smallest (2.8 ± 1.0 nm) Ag NP matrix producing the highest spectral intensities, when compared with other larger sized Ag NP matrices and conventional matrices such as SA and DHB. Furthermore, the optimal concentrations for different sized Ag NPs as matrices were determined as follows: 0.125 nM (2.8 ± 1.0 nm Ag NPs), 0.0625 nM (12.8 ± 3.2 nm Ag NPs), and 0.03125 nM (44.2 ± 5.0 nm Ag NPs), respectively. These results not only corroborated that Ag NPs could act as a very suitable matrix to assist in the desorption/ionization of LMW molecules but also revealed size-selected mass spectrometry signals with smaller Ag NPs as the MALDI matrix bearing more advantages than their larger counterparts. These novel findings paved the way for wider applications of MALDI-MS using Ag NPs as matrices for the analysis of LMW molecules.

Metal oxide nanoparticles for latent fingerprint visualization and analysis of small drug molecules using surface-assisted laser desorption/ionization mass spectrometry

We explored the applicability of different metal oxide nanoparticles (NPs; ZnO, TiO₂, Fe₂O₃, and CeO₂) for the optical imaging and mass spectrometric determination of small drug molecules in latent fingerprints (LFPs). Optical imaging was achieved using a dry method-simply dusting the LFPs with a minute amount of NP powder-and still images were captured using a digital microscope and a smartphone camera. Mass spectrometric determination was performed using the NPs as substrates for surface-assisted laser desorption ionization/mass spectrometry (SALDI-MS), which enabled the detection of small drug molecules with high signal intensities. The reproducibility of the results was studied by calculating the % error, SD, and RSD in the results obtained with the various metal oxide NPs. Collectively, the findings showed that using NPs can boost the intensity of the detected signal while minimizing background noise which is an issue predominantly associated with conventional organic matrices of MALDI-MS. Among the four metal oxide NPs, utilization of the Fe₂O₃ NPs led to the best SALDI performance and the highest detection sensitivity for the analytes of interest. The study was then extended by investigating the influence of time elapsed since the generation of the LFP on the detection of drug molecules in the LFP. The results demonstrated that this method allows the analysis of drug molecules after as long as one week at low and intermediate temperatures (0 and 25 °C). Therefore, the SALDI analysis of small molecules using inorganic NPs, which can be implemented in forensic laboratories for screening and detection purposes, as a powerful alternative to the use of organic matrices. Graphical abstract ᅟ.

Carbon nanowalls: a new versatile graphene based interface for the laser desorption/ionization-mass spectrometry detection of small compounds in real samples

Carbon nanowalls, vertically aligned graphene nanosheets, attract attention owing to their tunable band gap, high conductivity, high mechanical robustness, high optical absorbance and other remarkable properties. In this paper, we report for the first time the use of hydrophobic boron-doped carbon nanowalls (CNWs) for laser desorption/ionization of small compounds and their subsequent detection by mass spectrometry (LDI-MS). The proposed method offers sensitive detection of various small molecules in the absence of an organic matrix. The CNWs were grown by microwave plasma enhanced chemical vapor deposition (MW-PECVD), using a boron-carbon gas flow ratio of 1200 in H₂/CH₄ plasma, on silicon <100> wafer. The hydrophobicity of the surface offers a straightforward MS sample deposition, consisting of drop casting solutions of analytes and drying in air. Limits of detection in the picomolar and femtomolar ranges (25 fmol μL^-1 for neurotensin) were achieved for different types of compounds (fatty acids, lipids, metabolites, saccharides and peptides) having clinical or food industry applications. This rapid and sensitive procedure can also be used for quantitative measurements without internal standards with RSDs <19%, as in the case of glucose in aqueous solutions (LOD = 0.32 ± 0.02 pmol), blood serum or soft drinks. Moreover, melamine (63 ± 8.19 ng μL^-1), a toxic compound, together with creatinine and paracetamol, was detected in urine samples, while lecithin was detected in food supplements.

Nanomaterials as Assisted Matrix of Laser Desorption/Ionization Time-of-Flight Mass Spectrometry for the Analysis of Small Molecules

Matrix-assisted laser desorption/ionization (MALDI), a soft ionization method, coupling with time-of-flight mass spectrometry (TOF MS) has become an indispensible tool for analyzing macromolecules, such as peptides, proteins, nucleic acids and polymers. However, the application of MALDI for the analysis of small molecules (<700 Da) has become the great challenge because of the interference from the conventional matrix in low mass region. To overcome this drawback, more attention has been paid to explore interference-free methods in the past decade. The technique of applying nanomaterials as matrix of laser desorption/ionization (LDI), also called nanomaterial-assisted laser desorption/ionization (nanomaterial-assisted LDI), has attracted considerable attention in the analysis of low-molecular weight compounds in TOF MS. This review mainly summarized the applications of different types of nanomaterials including carbon-based, metal-based and metal-organic frameworks as assisted matrices for LDI in the analysis of small biological molecules, environmental pollutants and other low-molecular weight compounds.

Surface-assisted laser desorption ionization mass spectrometry techniques for application in forensics

Matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) is an excellent analytical technique for the rapid and sensitive analysis of macromolecules (>700 Da), such as peptides, proteins, nucleic acids, and synthetic polymers. However, the detection of smaller organic molecules with masses below 700 Da using MALDI-MS is challenging due to the appearance of matrix adducts and matrix fragment peaks in the same spectral range. Recently, nanostructured substrates have been developed that facilitate matrix-free laser desorption ionization (LDI), contributing to an emerging analytical paradigm referred to as surface-assisted laser desorption ionization (SALDI) MS. Since SALDI enables the detection of small organic molecules, it is rapidly growing in popularity, including in the field of forensics. At the same time, SALDI also holds significant potential as a high throughput analytical tool in roadside, work place and athlete drug testing. In this review, we discuss recent advances in SALDI techniques such as desorption ionization on porous silicon (DIOS), nano-initiator mass spectrometry (NIMS) and nano assisted laser desorption ionization (NALDI™) and compare their strengths and weaknesses with particular focus on forensic applications. These include the detection of illicit drug molecules and their metabolites in biological matrices and small molecule detection from forensic samples including banknotes and fingerprints. Finally, the review highlights recent advances in mass spectrometry imaging (MSI) using SALDI techniques.

CuFe2O4 magnetic nanocrystal clusters as a matrix for the analysis of small molecules by negative-ion matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

CuFe₂O₄ MNCs were proposed as a new matrix for negative ion MALDI-TOF MS, which exhibited interference-free background, high salt tolerance and good reproducibility for analysis of small molecules.

Electrospun polystyrene/oxidized carbon nanotubes film as both sorbent for thin film microextraction and matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the current study, polystyrene/oxidized carbon nanotubes (PS/OCNTs) film was prepared and applied as both an adsorbent of thin film microextraction (TFME) and matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) for the first time. The uniform size of PS/OCNTs film with OCNTs evenly and firmly immobilized in PS was obtained by electrospinning. And a novel TFME device was developed using the prepared PS/OCNTs film to enrich benzo[a]pyrene (BaP) from water, and also BaP and 1-hydroxypyrene (1-OHP) from urine sample. Then the extracted analytes on the PS/OCNTs film were directly applied to MALDI-MS analysis with PS/OCNTs film as the MALDI matrix. Our results show that PS/OCNTs film is a good TFME adsorbent toward the analytes and an excellent matrix for the sensitive determination of BaP and 1-OHP using MALDI-TOF-MS. The employment of PS/OCNTs as the matrix for MALDI can effectively avoid the large variation of signal intensity normally resulting from heterogeneous distribution of the adsorbed analyte on matrix layer, which therefore significantly improve spot-to-spot reproducibility. The introduction of PS in the film can prevent OCNTs from flying out of MALDI plate to damage the equipment. In addition, PS/OCNTs film also largely extended the duration of ion signal of target analyte compared to OCNTs matrix. The developed method was further successfully used to quantitatively determine BaP in environmental water and 1-OHP in urine samples. The results show that BaP and 1-OHP could be easily detected at concentrations of 50pgmL(-1) and 500pgmL(-1), respectively, indicating the high detection sensitivity of this method. For BaP analysis, the linear range was 0.1-20ngmL(-1) with a correlation coefficient of 0.9970 and the recoveries were in the range of 81.3 to 123.4% with the RSD≤8.5% (n=3); for urinary 1-OHP analysis, the linear range was 0.5-20ngmL(-1) with a correlation coefficient of 0.9937 and the recoveries were in the range of 79.2 to 103.4% with the RSD≤7.6% (n=3). Taken together, the developed method provides a simple, rapid, cost-effective and high-throughput approach for the analysis of BaP in environmental water and endogenous 1-OHP in urine samples.

A lithium-rich composite metal oxide used as a SALDI-MS matrix for the determination of small biomolecules

A lithium-rich composite metal oxide material used as a SALDI matrix for high throughput analysis of small molecules.

Benzimidazole, coumrindione and flavone derivatives as alternate UV laser desorption ionization (LDI) matrices for peptides analysis

Background

Matrix-assisted laser desorption/ionization (MALDI) is a soft ionization mass spectrometric technique, allowing the analysis of bio-molecules and other macromolecules. The matrix molecules require certain characteristic features to serve in the laser desorption/ionization mechanism. Therefore, only a limited number of compounds have been identified as ultraviolet- laser desorption/ionization (UV-LDI) matrices. However, many of these routine matrices generate background signals that useful information is often lost in them. We have reported flavones, coumarindione and benzimidazole derivatives as alternate UV-LDI matrices.

Results

Thirty one compounds have been successfully employed by us as matrices for the analysis of low molecular weight (LMW) peptides (up to 2000 Da). Two peptides, bradykinin and renin substrate tetra-decapeptide were analyzed by using the newly developed matrices. The MS measurements were made after mixing the matrix solution with analyte by using dried droplet sample preparation procedures. The synthesized matrix materials showed better S/N ratios and minimal background signals for low mass range. Furthermore, pico molar concentrations of [Glu¹]-fibrinopeptide B human could be easily analyzed with these matrices. Finally, BSA-digest was analyzed and identified through database search against Swiss-Prot by using Mascot.

Conclusions

These results validate the good performance of the synthesized UV-laser desorption/ionization (LDI) matrices for the analysis of low molecular weight peptides.