Optofluidic variable-focus lenses for light manipulation

Digital optofluidic compound eyes with natural structures and zooming capability for large-area fluorescence sensing

Compound eyes are ubiquitous natural biosensors that possess high temporal resolution and large fields of view (FOVs). While for solid materials based artificial imaging systems, flexible zooming ability while keeping the constant FOV is still challenging, as well as the low-cost fabrication. Herein, liquid compound eyes with natural structures are presented that synthesize optofluidics and bionics in a non-trivial manner, which enables the deformation-free zooming and flexible cell fluorescence sensing. Experimental results indicate that the innovatively manufactured bionic template possesses low roughness and uniform lens configuration with more than two thousands units, which endows the eyes with high-quality and low aberration imaging ability. Besides, digital controlled miscible liquids switching enables the focus of ommatidia simultaneously be adjusted from 150 μm to 5 mm with 100° view angle, and without bending the microlens curvature, to avoid FOV changing and image aberration. Due to large FOV and tunable ability, large-area cell fluorescence signal arrays and dynamic cell motion are imaged using this liquid compound eyes. This work presents novel strategy for compound lens manufacture at low-cost, and proposes deformation-free and continuous focus-tuning strategy, offering potentials for numerous applications, including biomedical sensing and adaptive imaging with large FOV.

A 3D-cascade-microlens optofluidic chip for refractometry with adjustable sensitivity

Refractive index (RI) sensing as a label-free and non-invasive method has been playing an important role in industrial metrology, biochemical detection, and environmental analysis. Due to the combined advantages of microoptics and microfluidics, optofluidic RI sensors have attracted growing interest. Despite a variety of prototypes of optofluidic RI sensors, comprehensive improvement in sensitivity, detection range, fabrication procedures and cost can still bring substantial benefits to the field. In this work, we fabricated a 3D-cascade-microlens optofluidic chip (3DCMOC) for RI sensing. Two-photon stereolithography was employed to fabricate the chip mold, with which the 3DCMOC could be easily manufactured via mold replication. By virtue of integrating four detection channels configured with different numbers (1, 3, 5, and 7) of cascaded microlenses within the 3DCMOC, adjustable sensitivity for RI sensing has been demonstrated through measuring standard sucrose solutions. It was found that the seven-microlens configuration achieved an excellent sensitivity (mean: 21 ± 5 AU·RIU (refractive index unit)^-1) and resolution (mean: 3.8 × 10^-5 ± 0.9 × 10^-5 RIU) at a cost of a narrow linear dynamic range (LDR, 1.3326-1.3548). In contrast, the single-microlens configuration led to an extended LDR (1.3326-1.5120 tested) despite the lower sensitivity (mean: 2.6 ± 0.2 AU·RIU^-1) and resolution (mean: 1.5 × 10^-4 ± 0.1 × 10^-4 RIU). Furthermore, the use of the 3DCMOC was investigated via real-time salinity sensing and analysis of urine specific gravity.

Design and characteristics of tunable in-plane optofluidic lens actuated by viscous force

In this Letter, we report a tunable in-plane optofluidic lens based on a new regulation method. The viscous force (VF) adjusts a 68# white mineral oil-air interface and focal length (f). Two glass plates bonded by ultraviolet adhesive strips form a lens chamber. Liquid enters the chamber by capillary action and forms a convex interface due to VF. As the liquid filling amount increases, VF is enhanced, and the interface deforms. Because of the uneven VF, interface is aspheric, which can reduce the lens aberration. Bendings on both sides of the interface caused by edge effect lead to an even polynomial profile of the entire interface, and they can be used for aberration correction of an in-plane spherical reflector. Experiments demonstrate the continuous tuning of f from 17.7 to 45.1 mm. The positive longitudinal spherical aberration (LSA) is effectively suppressed below 0.078 when f<35.5mm. Interface with a large negative LSA is used for spherical reflector aberration correction. Simulation results proved that the light spot improvement rate is>90%, and the maximum reached 99%.

A Portable and Accurate Phosphate Sensor Using a Gradient Fabry-Pérot Array

Here, a portable and accurate phosphate sensor using a gradient Fabry-Pérot array (FPA) is proposed. It can form a bidirectional gradient concentration (absorbance) distribution in the gradient FPA, simplifying the complex operations to get a standard curve and saving time. The gradient FPA can effectively filter out the interference (bubbles, light intensity, and salinity) while improving the absorbance, achieving a highly accurate and stable detection. Besides, the smartphone simplifies data processing and makes sensors more portable. In this work, the detection errors of standard solutions (100, 50, and 30 μM) are 0.39, 1.48, and 1.84%, respectively, and it has also been demonstrated with errors of 2.46 (sample 1, seawater), 2.08 (sample 2, lake water), and 1.83% (sample 3, sewage) for natural samples detection, which is more accurate than a traditional analyzer. The sensor has a good performance when affected by bubbles, light intensity, and salinity. In addition, the detection time is shortened to 80 s, which is more time saving compared with traditional devices, and the limit of detection (LOD) is 0.4 μM. It can be predicted that the novel optofluidic sensor is conducive to build a smart nutrient monitoring system and will be applied in the field of biochemistry and environmental chemistry.

Tunable-Focus Liquid Lens through Charge Injection

Liquid lenses are the simplest and cheapest optical lenses, and various studies have been conducted to develop tunable-focus liquid lenses. In this study, a simple and easily implemented method for achieving tunable-focus liquid lenses was proposed and experimentally validated. In this method, charges induced by a corona discharge in the air were injected into dielectric liquid, resulting in “electropressure” at the interface between the air and the liquid. Through a 3D-printed U-tube structure, a tunable-focus liquid lens was fabricated and tested. Depending on the voltage, the focus of the liquid lens can be adjusted in large ranges (−∞ to −9 mm and 13.11 mm to ∞). The results will inspire various new liquid-lens applications.

Precise label-free leukocyte subpopulation separation using hybrid acoustic-optical chip

Leukocyte subpopulations contain crucial physiological information; hence, precise and specific leukocyte separation is very important for leukemia diagnosis and analysis. However, conventional centrifugation and immunofluorescence-based separation methods are inaccurate and inconvenient due to the overlapping cell size and density or complex marking processes. Herein, we report a new label-free technology for precise leukocyte subpopulation separation by synergy of acoustic and optical technologies. Standing surface acoustic wave (SSAW) solved the problem of gentle and precise focusing of cells in optical systems. In addition, SSAW was used for the separation of granulocytes, which have evident size distinction from other components. In case of lymphocytes and monocytes, which have overlap in size/density, optical force could distinguish them accurately based on the RI difference, with the convenience of acoustic pre-focusing. In this experiment, separation of three types of leukocyte subtypes with considerable throughput and purity was conducted, through which we obtained 99% pure lymphocytes, 98% pure monocytes, and 95% pure granulocytes. Experimental results prove that the device has robust ability in separating leukocyte phenotypes and have the advantages of being non-invasive, label-free and precise. In the future, this convenient hybrid method will be a potential powerful tool for auxiliary clinical diagnosis and analysis.

Optofluidic differential colorimetry for rapid nitrite determination

Nitrite detection plays a very important role in environmental monitoring and for industrial purposes. The commonly used colorimetric analysis requires the measurement of a system's calibration curve by asynchronously preparing and detecting a dozen standard samples, leading to time-consuming, slow and cumbersome procedures. Here, we present a differential colorimetry method that determines the nitrite level based on the paired chromaticity gradient, formed by coupling the colour reaction into the microfluidic network. The two gradients reshape each other and contain enough information for the quantitative analysis of the sample being tested, without the need for a calibration curve. The independence of the two gradients of the absorbance change caused by the detecting system and water quality results in a high stability and anti-interference performance, with the assistance of its self-correcting ability. This differential colorimetry method requires little time and energy consumption as only one sample is needed. Standard nitrite solutions of 0.50 mM and 0.33 mM have been determined with an error of 1.16% and 0.50%, respectively. These measurements are advantageous in terms of greater stability by up to 10 times and accuracy by 6 times, compared with the calibration curve approaches. It is foreseeable that this differential colorimetry method will find a wide range of applications in the field of chemical detection.

Electrowetting-driven solar indoor lighting (e-SIL): an optofluidic approach towards sustainable buildings

Optofluidics is an emerging research field that combines the two disciplines of microfluidics and optics. By using microfluidic technologies for light control, optofluidic devices can offer several advantages over solid-type optical components, including optical-grade smoothness at the fluidic interface and a high degree of optical tunability without bulky and complex mechanical moving parts. These features have made optofluidic devices more versatile and reconfigurable to improve their optical performances. In this paper, we present a novel optofluidic sunlight manipulation technology for solar indoor lighting using the electrowetting principle. Rooftop sunlight is collected by a solar concentrator and guided to individual rooms along an optical fiber (waveguide) on the bottom of which tunable liquid prisms are linearly integrated. In the light-off mode, electrowetting controls the apex angle of the prisms to be φ = 0°. Under this condition, incoming sunlight experiences total internal reflection and thus keeps propagating along the optical fiber without leaking to the prism bottom for indoor lighting. In contrast, when liquid prisms are controlled to have the angle at φ > 0°, incoming sunlight is partially transmitted to the bottom surface of the arrayed prisms to contribute to interior illumination. Simulation studies validate that our electrowetting-driven solar indoor lighting (e-SIL) system is capable of variably tuning the lighting power from 0% to 98.6% of the input solar power by controlling the prism angle and varying the refractive index of prism materials. For experimental studies, we fabricated an array of 5 prisms filled with silicone oil and water. Using a fiber illuminator as a white light source that includes visible light with various incident angles, we have demonstrated two important lighting functions, (1) light on/off and (2) illumination power control. Lighting performance can be further enhanced by lowering the aspect ratio of the prism as well as increasing the number of prisms. The e-SIL technology based on tunable liquid prisms offers a new approach towards sustainable buildings that are able to reduce their electricity usage as well as provide a healthy and comfortable indoor environment under illumination of natural sunlight.

Real-time detection and monitoring of the drug resistance of single myeloid leukemia cells by diffused total internal reflection

Real-time detection and monitoring of the drug resistance of single cells have important significance in clinical diagnosis and therapy. Traditional methods operate a number of times for each individual concentration, and innovation is required for the design of more simple and efficient manipulation platforms with necessary higher sensitivity. Here, we have developed a novel diffused total internal reflection (TIR) method to perform drug metabolism and cytotoxicity analysis of trapped myeloid leukemia cells. Molm-13 cells, a type of acute myeloid leukemia cell, were chosen and injected into the device and fittingly captured by cell traps. Differing from previous studies, a series of different concentrations of azelaic acid (AZA) drug could be used from 0 mM to 50 mM through convection and diffusion processes in a single chip, with each concentration region featuring 50 cells, with a total of 549 cell trapping units. Thanks to the high sensitivity of the TIR method, only cells with the same drug concentration could be illuminated in the detection process. By adjusting the incident angle, we could exactly detect and monitor the drug resistance of the cells using different drug concentrations and the experimental resolution of the drug concentration was as small as 5 mM. Images of the membrane integrity and morphology of the cells in the bright field were measured and we also monitored the cell viabilities in the dark field over 2 hours. The effects of AZA on the Molm-13 cells were explored in different concentrations at the single cell level. Compared with the results of the traditional MTT assay method, the experimental results are more simple and accurate. A cell death of 5% at an AZA concentration of 5 mM was observed after 30 minutes, while a concentration of 40 mM corresponded to a 98% cell death. The designed method in this study provides a novel toolkit to control and monitor drug resistance at the single cell level more easily with higher sensitivity and we believe it has significant potential application in single cell quality assessment and medicine analysis in clinical practice.

Optofluidics Refractometers

Refractometry is a classic analytical method in analytical chemistry and biosensing. By integrating advanced micro- and nano-optical systems with well-developed microfluidics technology, optofluidics are shown to be a powerful, smart and universal platform for refractive index sensing applications. This paper reviews recent work on optofluidic refractometers based on different sensing mechanisms and structures (e.g., photonic crystal/photonic crystal fibers, waveguides, whisper gallery modes and surface plasmon resonance), and traces the performance enhancement due to the synergistic integration of optics and microfluidics. A brief discussion of future trends in optofluidic refractometers, namely volume sensing and resolution enhancement, are also offered.

Dielectrophoresis-actuated in-plane optofluidic lens with tunability of focal length from negative to positive

This paper reports a tunable in-plane optofluidic lens by continuously tuning a silicone oil-air interface from concave to convex using the dielectrophoresis (DEP) force. Two parallel glasses are bonded firmly on two sides by NOA 81(Norland Optical Adhesive 81) spacers, forming an open microfluidic channel. An ITO (indium tin oxide) strip and another unpatterned ITO layer are deposited on two glasses as the top and bottom electrodes. Initially, a capillary concave liquid-air interface is formed at the end of the open channel. Then the DEP force is enabled to continuously deform the interface (lens) from concave to convex. In the experiment, the focal length gradually decreases from about -1 mm to infinite and then from infinite to around + 1 mm when the driving voltage is increased from 0 V to 260 V. Particularly, the longitudinal spherical aberration (LSA) is effectively suppressed to have LSA < 0.04 when the lens is operated in the focusing state. This work is the first study of in-plane tunable lenses using the DEP force and possesses special merits as compared to the other reported tunable lenses that are formed by pumping different liquids or by temperature gradient, such as wide tunability, no need for continuous supply of liquids, low power consumption (~81 nJ per switching) due to the capacitor-type driving, and the use of only one type of liquid. Besides, its low aberration makes it favorable for light manipulation in microfluidic networks.

Optofluidic Tunable Lenses for In-Plane Light Manipulation

Optofluidics incorporates optics and microfluidics together to construct novel devices for microsystems, providing flexible reconfigurability and high compatibility. Among many novel devices, a prominent one is the in-plane optofluidic lens. It manipulates the light in the plane of the substrate, upon which the liquid sample is held. Benefiting from the compatibility, the in-plane optofluidic lenses can be incorporated into a single chip without complicated manual alignment and promises high integration density. In term of the tunability, the in-plane liquid lenses can be either tuned by adjusting the fluidic interface using numerous microfluidic techniques, or by modulating the refractive index of the liquid using temperature, electric field and concentration. In this paper, the in-plane liquid lenses will be reviewed in the aspects of operation mechanisms and recent development. In addition, their applications in lab-on-a-chip systems are also discussed.

Real-time two-photon lithography in controlled flow to create a single-microparticle array and particle-cluster array for optofluidic imaging

Microarray technology provides an excellent platform for biomedical and biochemical research including basic scientific studies, drug discovery, and diagnostics. Here, we develop a novel method referred to as real-time two-photon lithography in a controlled flow in which femtosecond laser two-photon lithography is performed in situ in the sequential mode stopping and flowing the flow of liquid resin containing microparticles to achieve 100% trapping on a one-bead-to-one-trap basis. Polydisperse particles can be all trapped to form a desired array by freely designing trap structures, resulting in an unprecedentedly high capture efficiency of ∼100%. No persistent pressure is needed after trapping which reduces the complexity of the system. In addition, trapping of particle-cluster arrays with a controlled number of particles is also achieved via this method. The trapped particles inside the microchip are successfully applied as microlenses for high quality imaging. The present technology marks an essential step towards a versatile platform for the integration of bead-based assays and paves the way for developing innovative microfluidics, optofluidics, micro-optics and single-cell analysis devices.

Optofluidic marine phosphate detection with enhanced absorption using a Fabry-Pérot resonator

Real-time detection of phosphate has significant meaning in marine environmental monitoring and forecasting the occurrence of harmful algal blooms. Conventional monitoring instruments are dependent on artificial sampling and laboratory analysis. They have various shortcomings for real-time applications because of the large equipment size and high production cost, with low target selectivity and the requirement of time-consuming procedures to obtain the detection results. We propose an optofluidic miniaturized analysis chip combined with micro-resonators to achieve real-time phosphate detection. The quantitative water-soluble components are controlled by the flow rate of the phosphate solution, chromogenic agent A (ascorbic acid solution) and chromogenic agent B (12% ammonium molybdate solution, 80% concentrated sulfuric acid and 8% antimony potassium tartrate solution with a volume ratio of 80 : 18 : 2). Subsequently, an on-chip Fabry-Pérot microcavity is formed with a pair of aligned coated fiber facets. With the help of optical feedback, the absorption of phosphate can be enhanced, which can avoid the disadvantages of the macroscale absorption cells in traditional instruments. It can also overcome the difficulties of traditional instruments in terms of size, parallel processing of numerous samples and real-time monitoring, etc. The absorption cell length is shortened to 300 μm with a detection limit of 0.1 μmol L^-1. The time required for detection is shortened from 20 min to 6 seconds. Predictably, microsensors based on optofluidic technology will have potential in the field of marine environmental monitoring.

Dual-mode reconfigurable focusing using the interface of aqueous and dielectric liquids

An optofluidic lens serves as a highly reconfigurable device to manipulate light by using a smoothly curved interface between immiscible liquids. Here we propose a dielectro-optofluidic lens (DOL) that is capable of dual-mode reconfigurable focusing. In this DOL, light focuses through a dielectric liquid-aqueous liquid interface where movement and deformation of the interface are achieved by electrohydrodynamic (EHD) actuation. We initially perform alternating current-EHD actuation of the dielectric liquid to obtain its benefit of frequency-dependent behavior and to prevent electrolysis of the aqueous liquid. Our DOL uniquely operates in two modes, namely, an oscillation mode in the low-frequency regime (<1 Hz) with a 10 mm focus-tuning range and a static mode in the high-frequency regime (>10 Hz) with a 1 mm focus-tuning range, which are easily modulated on demand by the frequency range of the applied voltage. We successfully conduct proof-of-concept experiments, including extending the depth-of-field using the oscillation mode to clearly visualize thick targets, and integrating the proposed DOL with a photoacoustic microscope using the static mode to adjust the focal point.

A switchable 3D liquid-liquid biconvex lens with enhanced resolution using Dean flow

Liquid-liquid (L²) microlenses have great potential for various applications in imaging and detection systems. Traditional L² microlenses are almost two-dimensional (2D) due to the modulation of flow rates in planer chips. Fundamental difficulties in effective application to cell imaging and analysis arise due to the limitations of 2D profiles. Herein, we demonstrate the feasible design of three-dimensional (3D) L² biconvex lenses to detect flowing cells. Using the auxiliary curved microchannels, a 3D L² lens is formed using Dean flow. The shape of the 3D biconvex lens and its focal length can be modulated by tuning the flow rates of the liquids. 3D light focusing was successfully achieved and the focal length could be modulated by around 435 μm, from 3554 μm to 3989 μm, in the experiment. The numerical aperture of the 3D L² lens was also measured and its range was 0.175-0.198. Compared to a traditional objective lens with the same magnification (4×/0.1), the resolution of the 3D L² biconvex lenses was improved 1.79-fold due to being completely immersed in liquid. Mouse myeloma cells sp2/0 and acute promyelocytic leukemia cells NB4 were imaged in the contrast experiments. The time response of experimental manipulation was about 2.7 ms. This 3D biconvex lens has great application prospects for cell imaging and analysis systems in lab-on-a-chip settings.

Optics-Integrated Microfluidic Platforms for Biomolecular Analyses

Compared with conventional optical methods, optics implemented on microfluidic chips provide small, and often much cheaper ways to interrogate biological systems from the level of single molecules up to small model organisms. The optical probing of single molecules has been used to investigate the mechanical properties of individual biological molecules; however, multiplexing of these measurements through microfluidics and nanofluidics confers many analytical advantages. Optics-integrated microfluidic systems can significantly simplify sample processing and allow a more user-friendly experience; alignments of on-chip optical components are predetermined during fabrication and many purely optical techniques are passively controlled. Furthermore, sample loss from complicated preparation and fluid transfer steps can be virtually eliminated, a particularly important attribute for biological molecules at very low concentrations. Excellent fluid handling and high surface area/volume ratios also contribute to faster detection times for low abundance molecules in small sample volumes. Although integration of optical systems with classical microfluidic analysis techniques has been limited, microfluidics offers a ready platform for interrogation of biophysical properties. By exploiting the ease with which fluids and particles can be precisely and dynamically controlled in microfluidic devices, optical sensors capable of unique imaging modes, single molecule manipulation, and detection of minute changes in concentration of an analyte are possible.

A liquid thermal gradient refractive index lens and using it to trap single living cell in flowing environments

A gradient refractive index (GRIN) lens has a great potential for on-chip imaging and detection systems because of its flat surface with reduced defects. This paper reports a liquid thermal GRIN lens prepared using heat conduction between only one liquid, and uses it as a tunable optical tweezer for single living cell trapping in a flowing environment. This liquid GRIN lens consists of a trapezoidal region in the upper layer which is used to establish a GRIN profile by the heat conduction between three streams of benzyl alcohol with different temperatures, and subsequently a rhombus region in the lower layer with compensation liquids to form a steady square-law parabolic refractive index profile only in transverse direction. Simulations and experiments successfully show the real-time tunability of the focusing properties. The focal length can be modulated in the range of 500 μm with the minimum focal length of 430 μm. A considerable high enhancement factor achieves 5.4 whereas the full width at half maximum is 4 μm. The response time of the GRIN lens is about 20 ms. Based on this enhancement, tunable optical trapping for single human embryonic kidney 293 cell in the range of 280 μm is demonstrated by varying the focal length and working distance which is difficult for solid optical tweezers. The considerable quality of this liquid GRIN lens indicates on-chip applications especially in high quality optical imaging, detection and cells' handling.

A Study of Dip-Coatable, High-Capacitance Ion Gel Dielectrics for 3D EWOD Device Fabrication

We present a dip-coatable, high-capacitance ion gel dielectric for scalable fabrication of three-dimensional (3D) electrowetting-on-dielectric (EWOD) devices such as an n × n liquid prism array. Due to the formation of a nanometer-thick electric double layer (EDL) capacitor, an ion gel dielectric offers two to three orders higher specific capacitance (c ≈ 10 μF/cm²) than that of conventional dielectrics such as SiO₂. However, the previous spin-coating method used for gel layer deposition poses several issues for 3D EWOD device fabrication, particularly when assembling multiple modules. Not only does the spin-coating process require multiple repetitions per module, but the ion gel layer also comes in risks of damage or contamination due to handling errors caused during assembly. In addition, it was observed that the chemical formulation previously used for the spin-coating method causes the surface defects on the dip-coated gel layers and thus leads to poor EWOD performance. In this paper, we alternatively propose a dip-coating method with modified gel solutions to obtain defect-free, functional ion gel layers without the issues arising from the spin-coating method for 3D device fabrication. A dip-coating approach offers a single-step coating solution with the benefits of simplicity, scalability, and high throughput for deposition of high-capacitance gel layers on non-planar EWOD devices. An ion gel solution was prepared by combining the [EMIM][TFSI] ionic liquid and the [P(VDF-HFP)] copolymer at various wt % ratios in acetone solvent. Experimental studies were conducted to fully understand the effects of chemical composition ratios in the gel solution and how varying thicknesses of ion gel and Teflon layers affects EWOD performance. The effectiveness and potentiality of dip-coatable gel layers for 3D EWOD devices have been demonstrated through fabricating 5 × 1 arrayed liquid prisms using a single-step dip-coating method. Each prism module has been individually controlled to achieve spatial beam steering without the need for bulky mechanical moving parts.

Out-of-plane integration of a multimode optical fiber for single particle/cell detection at multiple points on a microfluidic device with applications to particle/cell counting, velocimetry, size discrimination and the analysis of single cell lysate injections

In this paper a single particle/cell-tracking microfluidic device that integrates an out-of-plane multimode optical fiber (OP-MMF) is reported. This OP-MMF is used to generate three excitation light-lines and three detection spots using only one excitation source and one detector. It takes advantage of an optical tunneling mode to create two excitation lines in a microfluidic channel emanating from a single fiber end. This method was used to accurately count particles/cells and perform velocity measurements and size discrimination. The velocity and size distributions of 5, 7, and 10 μm fluorescently labeled polystyrene beads were determined using the OP-MMF. Additionally, this method was used to analyze cell lysates with the third excitation line in the separation channel. The OP-MMF setup accurately detected an intact cell twice ∼2 mm prior to lysis, determined its velocity, and detected the injected cell lysate 3 mm downstream of the injection point in the separation channel. Using this setup, the velocity of cells entering the lysis intersection and the absolute migration times of fluorescently labeled analytes injected into the separation channel were determined in an automated fashion. This method enabled us to determine a lysing/injection efficiency coefficient (K) using signals from the injected lysate signal and from the intact cell before lysing. K provided a reliable measurement of the amount of cell lysate that was injected into the separation channel. The approach reported here could be used in the future to track particles, cells or droplets in a variety of existing microfluidic devices without the need for multiplexed masks, layers, bulky optical elements or complex optical designs.

Switchable 3D optofluidic Y-branch waveguides tuned by Dean flows

Optical branch waveguides are one of the most important optical elements and have been widely exploited for optical communication systems. However, prevailing devices are typically solid and have limit in tunability. Liquid optical devices have attracted more interest for the advantage of tunability of liquid media, but their signals suffer serious leakage if the refractive index (RI) of liquid is smaller than that of solid channels. This paper demonstrates the tunable three-dimensional (3D) optofluidic Y-branch waveguides in plannar microchannels by simply introducing Dean flow. This device can reconfigure 3D Y-branch profiles and separate the intensity of light as tunable ratio from 0 to 1 by adjusting the flow rates with low loss. Different from the prevailing 2D liquid counterparts, the 3D configuration offer much more freedom in the selection of liquid media as liquid's RI can be totally independent to the solid channel structure. The transmission loss through the device is estimated to 0.97 db when the splitting angle is 10°, which shows the light is confined better in the 3D liquid structures than traditional 2D liquid counterparts. The Y-branch waveguides show potential in applications of integrated optofluidic devices.

Tunable focusing properties using optofluidic Fresnel zone plates

A Fresnel zone plate (FZP) is a unique diffractive optical device and widely used in integrated optical systems such as interferometers and antennas. A traditional FZP utilizes solid materials and cannot be modulated in real time for desired focusing properties. This paper reports a tunable optofluidic FZP based on a solid-liquid hybrid structure. This FZP consists of two parts including a fast microfluidic mixer, which can adjust the refractive index of liquids from 1.332 to 1.432, and subsequently an optical FZP with a solid-liquid combination. Simulations and experiments successfully showed the real-time tunability of the focusing properties such as peak intensity, focal spot sizes and focal lengths. The focal spot size can be modulated from 16 μm to 80 μm at λ₀ = 532 nm in experiments with focal length changes of approximately 700 μm. Moreover, it can be easily switched between focusing, defocusing and collimation. The dispersion with different wavelengths was also investigated, showing that these types of focusing properties are quite different from a traditional optofluidic lens by refraction or reflection. It is foreseeable that such a hybrid FZP may find wider applications in lab-on-a-chip systems and optical devices.

Liquid Core ARROW Waveguides: A Promising Photonic Structure for Integrated Optofluidic Microsensors

In this paper, we introduce a liquid core antiresonant reflecting optical waveguide (ARROW) as a novel optofluidic device that can be used to create innovative and highly functional microsensors. Liquid core ARROWs, with their dual ability to guide the light and the fluids in the same microchannel, have shown great potential as an optofluidic tool for quantitative spectroscopic analysis. ARROWs feature a planar architecture and, hence, are particularly attractive for chip scale integrated system. Step by step, several improvements have been made in recent years towards the implementation of these waveguides in a complete on-chip system for highly-sensitive detection down to the single molecule level. We review applications of liquid ARROWs for fluids sensing and discuss recent results and trends in the developments and applications of liquid ARROW in biomedical and biochemical research. The results outlined show that the strong light matter interaction occurring in the optofluidic channel of an ARROW and the versatility offered by the fabrication methods makes these waveguides a very promising building block for optofluidic sensor development.

Tunable self-imaging effect using hybrid optofluidic waveguides

Multimode interference (MMI) is a typical self-imaging phenomenon and has been widely exploited for optical devices like couplers and splitters. Usually, it utilizes solid waveguides only and thus has very limited tunability in self-imaging properties. This paper reports our original work on tunable MMI using a hybrid optofluidic waveguide. It is generated by the diffusion between miscible flows in a microchannel and consists of two parts: gradient-index liquid-liquid waveguide for light modulation and step-index liquid-solid waveguide for image formation. Simulation and experiments have shown successful realization of the real-time tuning of self-imaging properties. For detail, the image point (focal spot) width could be modulated from 7 μm to 16 μm, and the self-imaging period changes in the range of 500 μm by varying the fluid properties. It is foreseeable that such a hybrid optofluidic waveguide may find wider applications in lab-on-a-chip systems and optical devices.

In situ fabrication of a tunable microlens

We demonstrate an optofluidic variable-focus microlens formed by a solid polydimethylsiloxane (PDMS) meniscus channel wall and a tunable liquid lens body. A novel method for in situ fabrication of the meniscus channel wall is developed by introducing liquid PDMS prepolymer into a microchannel followed by curing. Three-light manipulation techniques including tunable optical focusing, collimating, and diverging are realized by varying the refractive index (RI) of liquid lens body. Also, we present an absorption measurement of methylene blue (MB) with a collimated probing light, achieving a detection limit of 0.25 μM by using a 5-mm-long detection cell.

Microbial trench-based optofluidic system for reagentless determination of phenolic compounds

Phenolic compounds are one of the main contaminants of soil and water due to their toxicity and persistence in the natural environment. Their presence is commonly determined with bulky and expensive instrumentation (e.g. chromatography systems), requiring sample collection and transport to the laboratory. Sample transport delays data acquisition, postponing potential actions to prevent environmental catastrophes. This article presents a portable, miniaturized, robust and low-cost microbial trench-based optofluidic system for reagentless determination of phenols in water. The optofluidic system is composed of a poly(methyl methacrylate) structure, incorporating polymeric optical elements and miniaturized discrete auxiliary components for optical transduction. An electronic circuit, adapted from a lock-in amplifier, is used for system control and interfering ambient light subtraction. In the trench, genetically modified bacteria are stably entrapped in an alginate hydrogel for quantitative determination of model phenol catechol. Alginate is also acting as a diffusion barrier for compounds present in the sample. Additionally, the superior refractive index of the gel (compared to water) confines the light in the lower level of the chip. Hence, the optical readout of the device is only altered by changes in the trench. Catechol molecules (colorless) in the sample diffuse through the alginate matrix and reach bacteria, which degrade them to a colored compound. The absorbance increase at 450 nm reports the presence of catechol simply, quickly (~10 min) and quantitatively without addition of chemical reagents. This miniaturized, portable and robust optofluidic system opens the possibility for quick and reliable determination of environmental contamination in situ, thus mitigating the effects of accidental spills.

Dielectrophoretically controlled Fresnel zone plate

Switchability is a highly sought after feature for planar optical systems. Suspensions of nanomaterials can be used for generating controllable changes in such systems. We report a planar diffractive microfluidic lens which integrates controlled dielectrophoresis (DEP) for trapping suspended nanomaterials. Silicon and tungsten oxide nanoparticle suspensions are used. These nanomaterials are trapped in such a way as to form alternating opaque and transparent rings using the DEP forces on demand. These rings form a planar diffractive Fresnel zone plate to focus the incident light. The Fresnel zone plate is tuned for the visible light region and the lens can be turned on (DEP applied) or off (DEP removed) in a controlled manner. This proof of concept demonstration can be further expanded for a variety of switchable optical devices and can be integrated with lab-on-a-chip and optofluidic devices.

Insect-Human Hybrid Eye (IHHE): an adaptive optofluidic lens combining the structural characteristics of insect and human eyes

Insect compound eyes and human camera eyes are two exquisite optical systems created by nature. The compound eye boasts an angle of view (AOV) up to 180° thanks to its hemispherical arrangement of hundreds of prime microscale lenses. The camera eye, on the other hand, can change shape to focus on objects at various depths, yet accepts light within a smaller AOV. Imitations of either imaging system have been abundant but with limited success. Here, we describe a reconfigurable polymeric optofluidic device that combines the architectural merits of both vision mechanisms, featuring a large AOV (up to 120°) with adaptive focusing capabilities (from 0 to 275 diopter (D)). This device consists of bi-layered microfluidics: an array of millimeter-sized fluidic lenses is integrated into the top layer and arranged on an elastomeric membrane embedded within the bottom layer. The membrane can be deformed from a planar surface into a series of dome-shaped geometries, rearranging individual fluidic lenses in desired curvilinear layouts. Meanwhile, each fluidic lens can vary its radius of curvature for a monocular depth sensation. Such a design presents a new perspective of tunable optofluidics for a broad range of applications, such as robotic vision and medical laparoendoscopy, where adaptive focalization with a large viewing angle is a clear advantage.

Multiphase optofluidics on an electro-microfluidic platform powered by electrowetting and dielectrophoresis

For diverse material phases used on an electro-microfluidic (EMF) platform, exploiting the electro-optical properties of matter in varied phases is essential to reap the benefits of the optofluidic capabilities of that platform. Materials in the four fundamental phases--solid-phase dielectric layer, liquid-phase droplet, gas-phase bubble, and plasma-phase bubble microplasma--have been investigated to offer electrically tunable optical characteristics for the manipulation of fluids on an EMF platform. Here we present an overview of the basic driving mechanisms for electrowetting and dielectrophoresis on the EMF platform. Three optofluidic examples occurring in multiple phases are described: solid optofluidics--liquid and light regulation by electrowetting on a solid polymer dispersed liquid crystal (PDLC) dielectric layer; liquid optofluidics--transmittance and reflectance modulation with formation of particle chains in a liquid droplet; and gas and plasma optofluidics--ignition and manipulation of a bubble microplasma by liquid dielectrophoresis. By combining the various materials possessing diverse electro-optical characteristics in separate phases, the EMF platform becomes an ideal platform for integrated optofluidics.

Wavelength-tunable light shaping with cholesteric liquid crystal microlenses

The ability to guide light on the mesoscopic scale is important both scientifically and technologically. Especially relevant is the development of wavelength-tunable light-shaping microdevices. Here we demonstrate the use of cholesteric liquid crystal polygonal textures organized as an array of microlenses for this purpose. The beam shaping is controlled by tuning the wavelength of the incident light in the visible spectrum. By taking advantage of the self-organization property of liquid crystals, the structure of the lens and its optical response are tailored by changing the annealing time of the single layer material during a completely integrated one-step process. The intrinsic helical organization of the layer is the cause of the light shaping and not the shape of the surface as for conventional lenses. A new concept of light manipulation using the structure chirality of liquid crystals is demonstrated, which concerns soft matter photonic circuits to mould the light.

An in-plane optofluidic microchip for focal point control

A polydimethylsiloxane (PDMS) optofluidic microfluidic chip comprising a tunable optofluidic in-plane biconvex microlens and a tunable optofluidic in-plane microprism is proposed for controlling the focal length and deviation angle of a light beam. In the proposed device, the microlens comprises an expansion chamber containing a high refractive index stream sandwiched between two low refractive index streams. Meanwhile, the microprism comprises a triangular chamber filled with two liquids, one with a higher refractive index than that of PDMS and the other a lower refractive index than that of PDMS. It is shown that the radius of curvature (and therefore the focal length) of the microlens can be adjusted by controlling the flow rate ratio of the core and cladding streams. In addition, it is shown that the deviation angle of the light ray exiting the microprism depends on the refractive indices of the two working fluids, the apex angle of the prism chamber, and the flow rate ratio of the two working fluids. In general, the results show that the biconvex microlens enables the focal length to be adjusted in the range of 2.9-7.6 mm when using benzothiazole and ethylene glycol-ethanol as the core and cladding fluids, respectively. Moreover, a deviation angle range of -6.2° to 22.3° can be achieved when using a microprism chamber with an apex angle of 90° and benzothiazole and DI water as the working fluids. The integrated optofluidic chip therefore can manipulate the focal length and deviation angle of a light beam by adjusting the relative flow rates of fluids.

Single particle detection, manipulation and analysis with resonant optical trapping in photonic crystals

We demonstrate a resonant optical trapping mechanism based on two-dimensional hollow photonic crystal cavities. This approach benefits simultaneously from the resonant nature and unprecedented field overlap with the trapped specimen. The photonic crystal structures are implemented in a 30 mm × 12 mm optofluidic chip consisting of a patterned silicon substrate and an ultrathin microfluidic membrane for particle injection and control. Firstly, we demonstrate permanent trapping of single 250 and 500 nm-sized particles with sub-mW powers. Secondly, the particle induces a large resonance shift of the cavity mode amounting up to several linewidths. This shift is exploited to detect the presence of a particle within the trap and to retrieve information on the trapped particle. The individual addressability of multiple cavities on a single photonic crystal device is also demonstrated.