Scalable solid-state synthesis of 2D transition metal oxide/graphene hybrid materials and their utilization for microsupercapacitors

Two-dimensional metal oxide (MO) nanostructures have unique properties compared with their bulk or 0D and 1D (nanoparticle and nanowire) counterparts. Their abundant surface area and atomically thin 2D structure are advantageous for their applications in catalysis and energy, as well as integration with 2D layered materials such as graphene and reduced graphene oxide (rGO). However, fast and scalable synthesis of 2D MOs and their nanocomposites remains challenging. Here, we developed a microwave-assisted solid-state synthesis method for the scalable generation of 2D MOs and 2D MO/rGO nanocomposites with tunable structure and composition. The structures and properties of 2D Fe2O3 and 2D ZnO as well as their nanocomposites with rGO were systematically investigated. The excellent electrochemical properties of such 2D MO/rGO nanocomposites also enable us to use them as electrode materials to fabricate microsupercapacitors. This work provides new insights into the scalable and solid-state synthesis of 2D nanocomposites and their potential applications in catalysis, energy conversion and storage.

Bioanalytical Applications of Graphene Quantum Dots for Circulating Cell-Free Nucleic Acids: A Review

Graphene quantum dots (GQDs) are carbonaceous nanodots that are natural crystalline semiconductors and range from 1 to 20 nm. The broad range of applications for GQDs is based on their unique physical and chemical properties. Compared to inorganic quantum dots, GQDs possess numerous advantages, including formidable biocompatibility, low intrinsic toxicity, excellent dispensability, hydrophilicity, and surface grating, thus making them promising materials for nanophotonic applications. Owing to their unique photonic compliant properties, such as superb solubility, robust chemical inertness, large specific surface area, superabundant surface conjugation sites, superior photostability, resistance to photobleaching, and nonblinking, GQDs have emerged as a novel class of probes for the detection of biomolecules and study of their molecular interactions. Here, we present a brief overview of GQDs, their advantages over quantum dots (QDs), various synthesis procedures, and different surface conjugation chemistries for detecting cell-free circulating nucleic acids (CNAs). With the prominent rise of liquid biopsy-based approaches for real-time detection of CNAs, GQDs-based strategies might be a step toward early diagnosis, prognosis, treatment monitoring, and outcome prediction of various non-communicable diseases, including cancers.

Electrochemical Deposition of ZnO Nanowires on CVD-Graphene/Copper Substrates

ZnO nanostructures were electrochemically synthesized on Cu and on chemical vapor deposited (CVD)-graphene/Cu electrodes. The deposition was performed at different electrode potentials ranging from -0.8 to -1.2 V, employing a zinc nitrate bath, and using voltametric and chronoamperometric techniques. The effects of the electrode nature and of the working electrode potential on the structural, morphological, and optical properties of the ZnO structures were investigated. It was found that all the samples crystallize in hexagonal wurtzite structure with a preferential orientation along the c-axis. Scanning electron microscopy (SEM) images confirm that the presence of a graphene covered electrode led to the formation of ZnO nanowires with a smaller diameter compared with the deposition directly on copper surface. The photoluminescence (PL) measurements revealed that the ZnO nanowires grown on graphene/Cu exhibit stronger emission compared to the nanowires grown on Cu. The obtained results add another possibility of tailoring the properties of such nanostructured films according to the specific functionality required.

Highly Stable Buffer-Based Zinc Oxide/Reduced Graphene Oxide Nanosurface Chemistry for Rapid Immunosensing of SARS-CoV-2 Antigens

The widespread and long-lasting effect of the COVID-19 pandemic has called attention to the significance of technological advances in the rapid diagnosis of SARS-CoV-2 virus. This study reports the use of a highly stable buffer-based zinc oxide/reduced graphene oxide (bbZnO/rGO) nanocomposite coated on carbon screen-printed electrodes for electrochemical immuno-biosensing of SARS-CoV-2 nuelocapsid (N-) protein antigens in spiked and clinical samples. The incorporation of a salt-based (ionic) matrix for uniform dispersion of the nanomixture eliminates multistep nanomaterial synthesis on the surface of the electrode and enables a stable single-step sensor nanocoating. The immuno-biosensor provides a limit of detection of 21 fg/mL over a linear range of 1-10 000 pg/mL and exhibits a sensitivity of 32.07 ohms·mL/pg·mm² for detection of N-protein in spiked samples. The N-protein biosensor is successful in discriminating positive and negative clinical samples within 15 min, demonstrating its proof of concept used as a COVID-19 rapid antigen test.

Sustainable Synthesis of Ionic Liquid-Functionalized Zinc Oxide Nanosheets (IL@ZnO): Evaluation of Antibacterial Potential Activity for Biomedical Applications

Zinc oxide (ZnO)-derived materials exhibit unique antibacterial, antifungal, and photochemical activities and are widely used in antibacterial formulations. In this work, ZnO nanosheets were prepared by green and cost-effective synthesis via a hydrothermal method, and the prepared ZnO nanosheets were further functionalized with an eco-friendly ionic liquid (IL). Thus, a sustainable approach was established to synthesize ZnO nanosheets. The functionalization of ZnO with the synthesized IL was fully characterized by advanced spectroscopic and microscopic techniques. The prepared ionic liquid-functionalized ZnO (IL@ZnO) showed self-organized layered-sheet arrangements caused by the intercalation of the IL onto the surface of ZnO nanosheets as revealed by scanning electron microscopy (SEM). The design of the IL comprised a carboxylic acid moiety for functionalization onto the surface of ZnO, whereas the hydrophobicity was tuned through the incorporation of a long alkyl chain. The developed IL@ZnO material was also tested against both Gram-positive and Gram-negative pathogenic bacteria for potential antibacterial activity by colony-forming unit (CFU) and minimum inhibitory concentration tests. The results revealed that the IL@ZnO exhibits significant antibacterial activity against tested strains. In particular, potent activity was observed against the Gram-positive skin-specific Staphylococcus aureus bacteria strain. The mechanism of bactericidal activity against bacteria was also explored along with the cytotoxicity toward mammalian cells, which reveals that the IL@ZnO is nontoxic in nature. To utilize the developed material owing to its bactericidal activity for practical applications, the IL@ZnO was fabricated onto the surface of cotton fabric, and its surface morphology was examined by SEM; the activity of IL@ZnO-treated cotton fabric was evaluated by the zone of inhibition assay. Additionally, the IL@ZnO-treated cotton fabric exhibited remarkable stability along with significant hydrophobicity and breathability and thus can be utilized as a biomaterial for biomedical applications, especially in medical masks, for reducing the risk of transmission of infectious diseases.

Binary vanadium pentoxide carbon-graphene foam composites derived from dark red hibiscus sabdariffa for advanced asymmetric supercapacitor

The development of advanced electrode materials derived from biomass for the next generation of energy storage devices, such as supercapacitors with high specific energy and specific power coupled with a good cycle stability, is required to meet the high demand for electric vehicles and portable devices. In this study, sustainable binary vanadium pentoxide carbon-graphene foam composites (V₂O₅@C-R₂HS/GF) were synthesized using a solvothermal method. The X-ray diffraction, Raman and FTIR techniques were used to study the structural properties of the composites (V₂O₅@C-R₂HS/20 mg GF and V₂O₅@C-R₂HS/40 mg GF). The SEM micrographs displayed an accordion-like morphology resulting from the graphene foam-modified V₂O₅@C-R₂HS composite. The V₂O₅@C-R₂HS, V₂O₅@C-R₂HS/20 mg GF and V₂O₅@C-R₂HS/40 mg GF composites were evaluated in a three-electrode configuration using 6 M potassium hydroxide (KOH) as an aqueous electrolyte. Furthermore, a two-electrode device was carried out by fabricating an asymmetric device (V₂O₅@C-R₂HS/GF//AC) where V₂O₅@C-R₂HS/20 mg GF was used as a positive electrode and activated carbon (AC) as a negative electrode at a cell voltage of 1.6 V in 6 M KOH. The V₂O₅@C-R₂HS/GF//AC showed a high specific energy and specific power values of 55 W h kg^-1 and 707 W kg^-1, respectively, at a specific current of 1 A g^-1. The asymmetric device presented a good stability test showing 99% capacity retention up to 10 000 cycles and was confirmed by the floating time up to 150 h with specific energy increasing 23.6% after the first 10 h. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 2)'.

Enhancing electrochemical performance of electrode material via combining defect and heterojunction engineering for supercapacitors

The poor conductivity and deficient active sites of transition metal oxides lead to low energy density of supercapacitors, which limits their wide application. In this work, double transition metal oxide heterojunctions with oxygen vacancy (V_o-ZnO/CoO) nanowires are prepared by effective hydrothermal and thermal treatments. The formation of the heterojunction results in the redistribution of interface charge between ZnO and CoO, generating an internal electric field to accelerate the electron transport. Meanwhile, oxygen vacancies can enhance the redox reaction activity to further improve the electrochemical kinetics of the electrode material. Therefore, the prepared V_o-ZnO/CoO can provide a superior specific capacity of 845 C g^-1 (1 A g^-1). An asymmetric supercapacitor with the V_o-ZnO/CoO as positive electrode shows a higher energy density of 51.6 Wh kg^-1 when the power density reaches 799.9 W kg^-1. This work proposes a synergistic combination of defect and heterojunction engineering to improve the electrochemical properties of materials, providing an important guidance for material design in energy-storage field.

Label free, electric field mediated ultrasensitive electrochemical point-of-care device for CEA detection

Developing point-of-care (PoC) diagnostic platforms for carcinoembryonic antigen detection is essential. However, thefew implementations of transferring the signal amplification strategies in electrochemical sensing on paper-based platforms are not satisfactory in terms of detection limit (LOD). In the quest for pushing down LOD, majority of the research has been targeted towards development of improved nanostructured substrates for entrapping more analyte molecules and augmenting the electron transfer rate to the working electrode. But, such approaches have reached saturation. This paper focuses on enhancing the mass transport of the analyte towards the sensor surface through the application of an electric field, in graphene-ZnO nanorods heterostructure. These hybrid nanostructures have been deposited on flexible polyethylene terephthalate substrates with screen printed electrodes for PoC application. The ZnO nanorods have been functionalized with aptamers and the working sensor has been integrated with smartphone interfaced indigenously developed low cost potentiostat. The performance of the system, requiring only 50 µl analyte has been evaluated using electrochemical impedance spectroscopy and validated against commercially available ELISA kit. Limit of detection of 1 fg/ml in human serum with 6.5% coefficient of variation has been demonstrated, which is more than three orders of magnitude lower than the existing attempts on PoC device.

Direct Fabrication of Ultra-Sensitive Humidity Sensor Based on Hair-Like Laser-Induced Graphene Patterns

Three-dimensional (3-D) porous graphitic structures have great potential for sensing applications due to their conductive carbon networks and large surface area. In this work, we present a method for facile fabrication of hair-like laser induced graphene (LIG) patterns using a laser scribing system equipped with a 355 nm pulsed laser. The polyimide (PI) film was positioned on a defocused plane and irradiated at a slow scanning speed using a misaligned laser beam. These patterns have the advantages of a large surface area and abundant oxidation groups. We have applied the hair-like LIG patterns to a humidity sensor. The humidity sensor showed good sensitivity characteristics and a large amount of electronic carriers can be stored.

Electrodeposition-Assisted Rapid Preparation of Pt Nanocluster/3D Graphene Hybrid Nanozymes with Outstanding Multiple Oxidase-Like Activity for Distinguishing Colorimetric Determination of Dihydroxybenzene Isomers

Here, we demonstrate a facile bottom-up strategy to fabricate Pt nanoclusters (Pt NCs) grafted onto three-dimensional graphene foam (3D GF) assisted by cetyltrimethyl ammonium bromide (CTAB) using the electrodeposition method. The homogeneous grafting of Pt NC onto 3D GF is due to the formation of hemimicelles above some CTAB concentration. With the unique nanocluster structure and the high content of Pt⁰, the Pt NC/3D GF nanohybrid exhibits extremely high activity and shows higher reusability and stability. Apart from the intrinsic oxidase-like activity with 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate, the Pt NC/3D GF nanohybrid can act simultaneously as an effective polyphenol oxidase (PPO) mimic, such as tyrosinase, catechol oxidase, and laccase. More importantly, utilizing intrinsic catechol oxidase-like activity and the oxidase-like activity with TMB as the substrate of the nanohybrid, distinguishing colorimetric determination of dihydroxybenzene isomers (catechol and hydroquinone) is performed. Distinguishing colorimetric analysis of dihydroxybenzene isomers was first developed using nanozymes. The present work provides a simple bottom-up approach for the reasonable fabrication of various nanostructured nanozymes with excellent performance using the electrodeposition method assisted with surfactants.

Simultaneous Detection and Photocatalysis Performed on a 3D Graphene/ZnO Hybrid Platform

The synergy between graphene foam (Gf) and ZnO nanoparticles (NPs) allows the detection of analytes at low conentrations, which can be subsequently photocatalyzed on the hybrid surface as well as in the liquid phase upon illumination with low-power UV-vis light-emitting diode (LED) lamps. Detection of methylene blue (MB) and bisphenol A (BPA) is monitored either by graphene-enhanced Raman scattering (GERS) or molecular doping/sensing upon analyte adsorption. Using GERS, we were able to detect concentrations as low as 0.3 ppm of MB, which remained adsorbed on the graphene surface after a photocatalytic conversion of 88% (total conversion). The photocatalysis performances of BPA and MB performed in the liquid phase were lower and corresponded to 73 and 33% as indicated by gas chromatography-mass spectrometry (GC/MS) and UV-vis, respectively. The kinetics of photocatalysis was fitted with a quasi-first-order reaction, and the apparent rate constant (k_app) was calculated according to the Langmuir-Hinshelwood model. The fastest kinetics was achieved with the hybrid platform named "Gf-ZnO400", which was thermally treated at high temperatures and with most of the Ni etched away. This is consistent with the excellent electronic interaction between ZnO and graphene foam as indicated by photoelectrochemistry analysis. We mainly employed Raman scattering and UV-vis spectroscopy analyses for detection and photocatalysis applications; however, we also used other complementary techniques such as focused ion-beam scanning electron microscopy (FIB-SEM), X-ray photoelectron spectroscopy (XPS), diffuse reflectance, GC/MS, and photoelectrochemistry to explore the synergetic behavior of these two nanomaterials. This work brings about new insights into the detection of analyte molecules followed by photocatalysis performed in the solid and liquid states.

Role of Additives in Electrochemical Deposition of Ternary Metal Oxide Microspheres for Supercapacitor Applications

A simple two-step approach has been employed to synthesize a cobalt-nickel-copper ternary metal oxide, involving electrochemical precipitation/deposition followed by calcination. The ternary metal hydroxide gets precipitated/deposited from a nitrate bath at the cathode in the catholyte chamber of a two-compartment diaphragm cell at room temperature having a pH ≈ 3. The microstructure of the ternary hydroxides was modified in situ by two different surfactants such as cetyltrimethylammonium bromide and dodecyltrimethylammonium bromide in the bath aiming for enhanced storage performance in the electrochemical devices. The effect of the surfactant produces a transition from microspheres to nanosheets, and the effect of micelle concentration produces nanospheres at a higher ion concentration. The ternary hydroxides were calcined at 300 °C to obtain the desired ternary mixed oxide materials as the electrode for hybrid supercapacitors. X-ray diffraction analysis confirmed the formation of the ternary metal oxide product. The scanning electron microscopy images associated with energy-dispersive analysis suggest the formation of a nanostructured porous composite. Ternary metal oxide in the absence and presence of a surfactant served as the cathode and activated carbon served as the anode for supercapacitor application. DTAB-added metal oxide showed 95.1% capacitance retention after 1000 cycles, achieving 188 F/g at a current density of 0.1 A/g, and thereafter stable until 5000 cycles, inferring that more transition metals in the oxide along with suitable surfactants at an appropriate micellar concentration may be better for redox reactions and achieving higher electrical conductivity and smaller charge transfer resistance. The role of various metal cations and surfactants as additives in the electrolytic bath has been discussed.

Scalable synthesis of gyroid-inspired freestanding three-dimensional graphene architectures

Three-dimensional porous architectures of graphene are desirable for energy storage, catalysis, and sensing applications. Yet it has proven challenging to devise scalable methods capable of producing co-continuous architectures and well-defined, uniform pore and ligament sizes at length scales relevant to applications. This is further complicated by processing temperatures necessary for high quality graphene. Here, bicontinuous interfacially jammed emulsion gels (bijels) are formed and processed into sacrificial porous Ni scaffolds for chemical vapor deposition to produce freestanding three-dimensional turbostratic graphene (bi-3DG) monoliths with high specific surface area. Scanning electron microscopy (SEM) images show that the bi-3DG monoliths inherit the unique microstructural characteristics of their bijel parents. Processing of the Ni templates strongly influences the resultant bi-3DG structures, enabling the formation of stacked graphene flakes or fewer-layer continuous films. Despite the multilayer nature, Raman spectra exhibit no discernable defect peak and large relative intensity for the Raman 2D mode, which is a characteristic of turbostratic graphene. Moiré patterns, observed in scanning tunneling microscopy images, further confirm the presence of turbostratic graphene. Nanoindentation of macroscopic pillars reveals a Young's modulus of 30 MPa, one of the highest recorded for sp² carbon in a porous structure. Overall, this work highlights the utility of a scalable self-assembly method towards porous high quality graphene constructs with tunable, uniform, and co-continuous microstructure.

Large area flexible pressure/strain sensors and arrays using nanomaterials and printing techniques

Sensors are becoming more demanding in all spheres of human activities for their advancement in terms of fabrication and cost. Several methods of fabrication and configurations exist which provide them myriad of applications. However, the advantage of fabrication for sensors lies with bulk fabrication and processing techniques. Exhaustive study for process advancement towards miniaturization from the advent of MEMS technology has been going on and progressing at high pace and has reached a highly advanced level wherein batch production and low cost alternatives provide a competitive performance. A look back to this advancement and thus understanding the route further is essential which is the core of this review in light of nanomaterials and printed technology based sensors. A subjective appraisal of these developments in sensor architecture from the advent of MEMS technology converging present date novel materials and process technologies through this article help us understand the path further.

ZnO decorated laser-induced graphene produced by direct laser scribing

A scalable laser scribing approach to produce zinc oxide (ZnO) decorated laser-induced graphene (LIG) in a unique laser-processing step was developed by irradiating a polyimide sheet covered with a Zn/ZnO precursor with a CO₂ laser (10.6 μm) under ambient conditions. The laser scribing parameters revealed a strong impact on the surface morphology of the formed LIG, on ZnO microparticles' formation and distribution, as well as on the physical properties of the fashioned composites. The ZnO microparticles were seen to be randomly distributed along the LIG surface, with the amount and dimensions depending on the used laser processing conditions. Besides the synthesis conditions, the use of different precursors also resulted in distinct ZnO growth's yields and morphologies. Raman spectroscopy revealed the existence of both wurtzite-ZnO and sp² carbon in the majority of the produced samples. Broad emission bands in the visible range and the typical ZnO near band edge (NBE) emission were detected by photoluminescence studies. The spectral shape of the luminescence signal was seen to be extremely sensitive to the employed processing parameters and precursors, highlighting their influence on the composites' optical defect distribution. The sample produced from the ZnO-based precursor evidenced the highest luminescence signal, with a dominant NBE recombination. Electrochemical measurements pointed to the existence of charge transfer processes between LIG and the ZnO particles.

Probing surface states in C60 decorated ZnO microwires: detailed photoluminescence and cathodoluminescence investigations

ZnO microwires synthesised by the flame transport method and decorated with C₆₀ clusters were studied in detail by photoluminescence (PL) and cathodoluminescence (CL) techniques. The optical investigations suggest that the enhanced near band edge recombination observed in the ZnO/C₆₀ composites is attributed to the reduction of the ZnO band tail states in the presence of C₆₀. Well-resolved free and bound excitons recombination, as well as 3.31 eV emission, are observed with increasing amount of C₆₀ flooding when compared with the ZnO reference sample. Moreover, a shift of the broad visible emission to lower energies occurs with increasing C₆₀ content. In fact, this band was found to be composed by two optical centres peaked in the green and orange/red spectral regions, presenting different lifetimes. The orange/red band exhibits faster lifetime decay, in addition to a more pronounced shift to lower energies, while the peak position of the green emission only shows a slight change. The overall redshift of the broad visible band is further enhanced by the change in the relative intensity of the mentioned optical centres, depending on the excitation intensity and on the C₆₀ flooding. These results suggest the possibility of controlling/tuning the visible emission outcome by increasing the C₆₀ amount on the ZnO surface due to the surface states present in the semiconductor. An adequate control of such phenomena may have quite beneficial implications when sensing applications are envisaged.

Tracking the interfacial charge transfer behavior of hydrothermally synthesized ZnO nanostructures via complementary electrogravimetric methods

The mechanism of species fluxes during the charge-discharge process in a nanostructured ZnO electrode was studied by a combined methodology of electrochemical quartz-crystal microbalance (EQCM) and ac-electrogravimetry. Under the conditions of this study, anions (SO42-) possess the highest kinetics to be transferred at the electrode/electrolyte interface in the charge balance while cations (identified as Na+·5H2O and Na+) play the major role as charge carriers. Free H2O molecules present a sluggish behavior and their interfacial transfer occurs at a low scan rate or low frequencies. These findings shed light on the nature of ions and solvent participation in the charge balance of hydrothermally synthesized ZnO nanostructures directly grown on a QCM device. The combined methodology proposed herein provides dynamic and gravimetric analysis of interfacial charge transfer and can be extended to investigate other nanostructured metal oxide-based electrodes for energy storage.

Graphene- and Carbon-Nanotube-Based Transparent Electrodes for Semitransparent Solar Cells

A substantial amount of attention has been paid to the development of transparent electrodes based on graphene and carbon nanotubes (CNTs), owing to their exceptional characteristics, such as mechanical and chemical stability, high carrier mobility, high optical transmittance, and high conductivity. This review highlights the latest works on semitransparent solar cells (SSCs) that exploit graphene- and CNT-based electrodes. Their prominent optoelectronic properties and various fabrication methods, which rely on laminated graphene/CNT, doped graphene/CNT, a hybrid graphene/metal grid, and a solution-processed graphene mesh, with applications in SSCs are described in detail. The current difficulties and prospects for future research are also discussed.

Three dimensional vanadium pentoxide/graphene foam composite as positive electrode for high performance asymmetric electrochemical supercapacitor

The electrochemical performance of hydrothermal synthesized three dimensional (3D) orthorhombic vanadium pentoxide (V₂O₅) nanosheets and vanadium pentoxide/graphene foam (V₂O₅/GF) composites at different mass loading of GF were successfully studied. The optimized V₂O₅/GF-150 mg composite provided a high specific capacity of 73 mA h g^-1, which was much higher than that the pristine V₂O₅ (60 mA h g^-1) nanosheets at a specific current of 1 A g^-1. A hybrid capacitor was also fabricated by adopting a carbon-based negative electrode obtained from the pyrolysis of an iron-PANI polymer (C-Fe/PANI) mixture and the 3D V₂O₅/GF-150 mg composite as the positive electrode in 6 M KOH electrolyte. The hybrid device of V₂O₅/GF-150 mg//C-Fe/PANI demonstrated a high energy density of 39 W h kg^-1 with a corresponding high power density of 947 W kg^-1 at a specific current of 1 A g^-1 in an operating voltage window of 0.0-1.6 V. The hybrid device also exhibited an excellent cycling stability with 74% capacity retention recorded for up to 10,000 constant charging-discharge cycles and an excellent ageing test at a specific current of 10 A g^-1.

Foamlike 3D Graphene Coatings for Cooling Systems Involving Phase Change

Boiling is an efficient heat-transfer mechanism because of the utilization of latent heat of vaporization and has the potential to be used for cooling high-power electronic devices. Surface enhancement is one of the widely used techniques for heat-transfer augmentation in boiling systems. Here, an experimental investigation was conducted on chemical vapor deposition-grown three-dimensional (3D) foamlike graphene-coated silicon surfaces to investigate the effect of pore structures on pool boiling heat transfer and corresponding heat-transfer enhancement mechanisms. 3D graphene-coated samples with four graphene thicknesses were utilized along with a plain surface to investigate boiling heat-transfer characteristics and enhancement mechanisms. A high-speed camera was used to provide a deeper understanding of the bubble dynamics upon departure of emerging bubbles and visualize vapor columns in different boiling regimes. On the basis of the obtained results, in addition to interfacial evaporation, mechanical resonance of the 3D structure had also a considerable effect on vapor column formation. The results indicated that there is an optimum thickness, which exhibits the best performance in terms of boiling heat transfer.

Defect-enhanced performance of a 3D graphene anode in a lithium-ion battery

Morphological defects were generated in an undoped 3D graphene structure via the involvement of a ZnO and Mg(OH)₂ intermediate nanostructure layer placed between two layers of vapor-deposited graphene. Once the intermediate layer was etched, the 3D graphene lost support and shrank; during this process many morphological defects were formed. The electrochemical performance of the derived defective graphene utilized as the anode of a lithium (Li)-ion battery was significantly improved from ∼382 mAh g^-1 to ∼2204 mAh g^-1 at 0.5 A g^-1 compared to normal 3D graphene. The derived defective graphene exhibited an initial capacity of 1009 mAh g^-1 and retention of 83% at 4 A g^-1 for 500 cycles, and ∼330 mAh g^-1 at a high rate of 20 A g^-1. Complicated defects such as wrinkles, pores, and particles formed during the etching of the intermediate layer, were considered to contribute to the improvement of the electrochemical performance.

Ultralight Interconnected Graphene-Amorphous Carbon Hierarchical Foam with Mechanical Resiliency for High Sensitivity and Durable Strain Sensors

Ultralight graphene-amorphous carbon (AC) hierarchical foam (G-ACHF) was synthesized by chemical vapor deposition at 1065 °C, close to the melting point of copper. The high temperature leads to the hierarchical structure with an inner layer of graphene and an outer layer of AC. The inner graphene layer with high conductivity and integrity provides high sensitivity. The outer AC layer helps to enhance its durability and mechanical resiliency. The hierarchical structure recovers without damaging the structural integrity after a large strain of 90%. The electrical resistance of G-ACHF remains stable after 200 cycles of compression to a strain level of 50%. The fluctuation of the resistance value remains within ±3%, showing its stability in sensing performance. The pressure sensitivity of G-ACHF reaches as high as ∼11.47 Pa^-1. Finite element simulation reveals that the stress borne by the key position of G-ACHF is 47% lower than that of graphene foam without the AC layer, proving that the AC layer can disperse the stress effectively. With a very low density of 1.17 × 10^-3 g cm^-1, the reversibly compressible G-ACHF strain sensor material exhibits its promising application potential in lightweight and wearable devices.

Synthesis and evaluation of the cytotoxic and anti-proliferative properties of ZnO quantum dots against MCF-7 and MDA-MB-231 human breast cancer cells

Current trends in therapeutic research are the application of nanomaterial carriers for cancer therapy. One such molecule, ZnO, originally used in diagnosis and as a drug carrier, is gaining importance for its biological properties. Here, we report for the first time, the scope of ZnO QDs for enhanced cytotoxicity against MCF-7 and metastatic MDA-MB-231 human breast cancer cells. Unlike other ZnO nanostructures, ZnO QDs are dispersed and small sized (8-10nm) which is believed to greatly increase the cellular uptake. Furthermore, the acidic tumor microenvironment attracts ZnO QDs enhancing targeted therapy while leaving normal cells less affected. Results from MTT assay demonstrated that ZnO QDs induced cytotoxicity to MCF-7 and metastatic MDA-MB-231 breast cancer cells at very low concentrations (10 and 15μg/ml) as compared to other reported ZnO nanostructures. HEK-293 cells showed less toxicity at these concentrations. Confocal microscope images from DAPI staining and TUNEL assay demonstrated that ZnO QDs induced nuclear fragmentation and apoptosis in MCF-7 and MDA-MB-231. FACS results suggested ZnO QDs treatment induced cell cycle arrest at the G0/G1 phase in these cells. ZnO QDs drastically decreased the proliferation and migration of MCF-7 and MDA-MB-231 as seen from the results of the clonogenic and wound healing assays respectively. Furthermore, our data suggested that ZnO QDs regulated apoptosis via Bax and Bcl-2 proteins as validated by immunofluorescence and western blot. Taken together, our findings demonstrate that these ultra-small sized ZnO QDs destabilize cancer cells by using its acidic tumor microenvironment thereby inducing apoptosis and controlling the cell proliferation and migration at low dosages.

Three-Dimensional Printed Graphene Foams

An automated metal powder three-dimensional (3D) printing method for in situ synthesis of free-standing 3D graphene foams (GFs) was successfully modeled by manually placing a mixture of Ni and sucrose onto a platform and then using a commercial CO₂ laser to convert the Ni/sucrose mixture into 3D GFs. The sucrose acted as the solid carbon source for graphene, and the sintered Ni metal acted as the catalyst and template for graphene growth. This simple and efficient method combines powder metallurgy templating with 3D printing techniques and enables direct in situ 3D printing of GFs with no high-temperature furnace or lengthy growth process required. The 3D printed GFs show high-porosity (∼99.3%), low-density (∼0.015g cm^-3), high-quality, and multilayered graphene features. The GFs have an electrical conductivity of ∼8.7 S cm^-1, a remarkable storage modulus of ∼11 kPa, and a high damping capacity of ∼0.06. These excellent physical properties of 3D printed GFs indicate potential applications in fields requiring rapid design and manufacturing of 3D carbon materials, for example, energy storage devices, damping materials, and sound absorption.

Morphology engineering of ZnO nanostructures for high performance supercapacitors: enhanced electrochemistry of ZnO nanocones compared to ZnO nanowires

In this work, the morphology of ZnO nanostructures is engineered to demonstrate enhanced supercapacitor characteristics of ZnO nanocones (NCs) compared to ZnO nanowires (NWs). ZnO NCs are obtained by chemically etching ZnO NWs. Electrochemical characteristics of ZnO NCs and NWs are extensively investigated to demonstrate morphology dependent capacitive performance of one dimensional ZnO nanostructures. Cyclic voltammetry measurements on these two kinds of electrodes in a three-electrode cell confirms that ZnO NCs exhibit a high specific capacitance of 378.5 F g^-1 at a scan rate of 20 mV s^-1, which is almost twice that of ZnO NWs (191.5 F g^-1). The charge-discharge and electrochemical impedance spectroscopy measurements also clearly result in enhanced capacitive performance of NCs as evidenced by higher specific capacitances and lower internal resistance. Asymmetric supercapacitors are fabricated using activated carbon (AC) as the negative electrode and ZnO NWs and NCs as positive electrodes. The ZnO NC⫽AC can deliver a maximum specific capacitance of 126 F g^-1 at a current density of 1.33 A g^-1 with an energy density of 25.2 W h kg^-1 at the power density of 896.44 W kg^-1. In contrast, ZnO NW⫽AC displays 63% of the capacitance obtained from the ZnO NC⫽AC supercapacitor. The enhanced performance of NCs is attributed to the higher surface area of ZnO nanostructures after the morphology is altered from NWs to NCs.

Enhanced Photoelectrochemical Performance of Cuprous Oxide/Graphene Nanohybrids

Combination of an oxide semiconductor with a highly conductive nanocarbon framework (such as graphene or carbon nanotubes) is an attractive avenue to assemble efficient photoelectrodes for solar fuel generation. To fully exploit the possible synergies of the hybrid formation, however, precise knowledge of these systems is required to allow rational design and morphological engineering. In this paper, we present the controlled electrochemical deposition of nanocrystalline p-Cu2O on the surface of different graphene substrates. The developed synthetic protocol allowed tuning of the morphological features of the hybrids as deduced from electron microscopy. (Photo)electrochemical measurements (including photovoltammetry, electrochemical impedance spectroscopy, photocurrent transient analysis) demonstrated better performance for the 2D graphene containing photoelectrodes, compared to the bare Cu2O films, the enhanced performance being rooted in suppressed charge carrier recombination. To elucidate the precise role of graphene, comparative studies were performed with carbon nanotube (CNT) films and 3D graphene foams. These studies revealed, after allowing for the effect of increased surface area, that the 3D graphene substrate outperformed the other two nanocarbons. Its interconnected structure facilitated effective charge separation and transport, leading to better harvesting of the generated photoelectrons. These hybrid assemblies are shown to be potentially attractive candidates in photoelectrochemical energy conversion schemes, namely CO2 reduction.

Simultaneous Detection of Static and Dynamic Signals by a Flexible Sensor Based on 3D Graphene

A flexible acoustic pressure sensor was developed based on the change in electrical resistance of three-dimensional (3D) graphene change under the acoustic waves action. The sensor was constructed by 3D graphene foam (GF) wrapped in flexible polydimethylsiloxane (PDMS). Tuning forks and human physiological tests indicated that the acoustic pressure sensor can sensitively detect the deformation and the acoustic pressure in real time. The results are of significance to the development of graphene-based applications in the field of health monitoring, in vitro diagnostics, advanced therapies, and transient pressure detection.

Determination of 4-nitrophenol in water by use of a screen-printed carbon electrode modified with chitosan-crafted ZnO nanoneedles

The toxicity and environmental pollution by nitro aromatic compounds in water samples is the most recognized problem in worldwide. Hence, we have developed a simple and highly sensitive electrochemical method for the determination of 4-nitrophenol (4-NP) in water samples based on a chitosan (CHT) crafted zinc oxide nanoneedles (ZnO NDs) modified screen printed carbon electrode. The CHT/ZnO NDs were characterized by Field emission scanning electron microscope, Fourier transform infrared spectroscopy and X-ray diffraction technique. The CHT/ZnO NDs modified electrode showed an enhanced electrocatalytic activity and lower potential detection towards 4-NP, compared with other modified electrodes. Under optimum conditions, the differential pulse voltammetry (DPV) response of CHT/ZnO NDs modified electrode displayed a wide linear response range from 0.5 to 400.6μM towards the detection of 4-NP with a detection limit (LOD) of 0.23μM. The CHT/ZnO NDs modified electrode was used for specific and sensitive detection of 4-NP in presence of possible interfering species and common metal ions with long-term stability. In addition, the excellent analytical performance of the proposed sensor was successfully applied for determination of 4-NP in water samples.

ZnO nanosheet-assisted immobilization of Ag nanoparticles on graphene/Ni foam for highly efficient reduction of 4-nitrophenol

ZnO nanosheet-assisted immobilization of Ag nanoparticles on graphene/Ni foam forming a novel hybrid structure for catalysis.

Current and future directions in electron transfer chemistry of graphene

The participation of graphene in electron transfer chemistry, where an electron is transferred between graphene and other species, encompasses many important processes that have shown versatility and potential for use in important applications.

A MOF-derived ZIF-8@Zn1−xNixO photocatalyst with enhanced photocatalytic activity

Today, metal doped ZnO exhibits good performances and attracts worldwide attention.