A Dual Functional 2D MOF Exhibiting Rare Photosalient Effect as well as Selective Pd(II) Sensing in Aqueous Medium

A Zn(II) based two-dimensional metal-organic framework (2D MOF) [Zn₂(suc)₂(4-nvp)₂] (1) [H₂suc = succinic acid and 4-nvp = 4-(1-naphthylvinyl)pyridine] exhibits a "photosalient effect" under UV light as well as sunlight along with the release of a stereoselective cyclobutane ligand, 1,3-bis(4'-pyridyl)-2,4-bis(naphthyl)cyclobutane (rctt-4-pncb). Photolysis of in situ generated MOF in solution also leads to the formation of rctt-4-pncb crystals. Interestingly, compound 1 shows a high selectivity for Pd(II) sensing in aqueous medium.

Topological structural transformation of a two-dimensional coordination polymer via single-crystal to single-crystal photoreaction

A two-dimensional coordination polymer can carry out photoinduced C–C coupling reaction through single-crystal to single-crystal transformation and exhibit photocontrolled fluorescence.

New structurally diverse photoactive cadmium coordination polymers

Four structurally diverse coordination polymers 1-4 (CP1-CP4) were designed and constructed from Cd(II) ions and various carboxyl ligands (H₂oba, 4,4'-oxydibenzoic acid; H₂bpa, (E)-4,4'-(ethene-1,2-diyl)dibenzoic acid; H₂pbda, 4,4'-((1,3-phenylenebis(methylene))bis(oxy))dibenzoic acid) and the alkene containing ligand (CH₃-bpeb, 4,4'-((1E,1'E)-(2,5-dimethyl-1,4-phenylene)bis(ethene-2,1-diyl))dipyridine). CP1-CP4 possess Cd₂ binuclear secondary building units (SBUs). The geometry of the dicarboxylate ligands and the reaction conditions determined the final structure with a variety of motifs. CP1 possesses an interdigitated 2D structure, while CP2 consists of a 1D channel-like motif with isolated CH₃-bpeb molecules embedded in the channels. The solid-state structure of CP3 consists of two unique layers interpenetrated to form a 2D + 2D → 2D polycatenated backbone, while a 1D channel-like motif filled by isolated CH₃-bpeb molecules was observed for CP4. In all four coordination polymers pairs of CH₃-bpeb molecules were bound or encapsulated by the Cd₂ secondary building units at an appropriate distance and orientation for solid-state [2 + 2] photodimerization of one pair of CC bonds. Desolvation of CP3 with heat resulted in a decrease in solid-state fluorescence and a slowing of the rate of solid-state photodimerization.

Single-crystal to single-crystal transformation of a coordination chain to a two-dimensional coordination network through a photocycloaddition reaction

UV irradiation of a unique ladder-like coordination polymer affords a two-dimensional coordination network through single-crystal to single-crystal photocycloaddition reaction.

Blue- and white-light-emitting 2D-coordination polymers and their solid-state photodimerization reaction

Two Pb(ii) coordination polymers (CPs) isolated and show 2D-sheet-like structures. CPs with the formate, undergoes solid-state photodimerization and displays blue emission. While 2D sheet with acetate is photostable and show white-light emission.

[2+2] Photodimerization of Stilbazoles Promoted by Oxalic Acid in Suspension

In this study, a very simple technique to perform efficiently photodimerization of some vinylpyridines is reported. By irradiating a stirred mixture of several stilbazoles with solid oxalic acid dihydrate dispersed in a nonpolar (i.e., cyclohexane) or moderately polar (benzene, dichloromethane, dioxane) solvent, the corresponding dimeric cyclobutane adducts were obtained in high yields and excellent regio- and stereoselectivities. The strategy could also be applied successfully to oily, waxy, or even insoluble stilbazoles. Moreover, the oxalic acid loading could be lowered to substoichiometric amounts. When further optimizations were needed, our strategy was found to be highly flexible to identify other oligocarboxylic acids as alternative additives to improve, or even overturn, the regioselectivity. Oxalic acid and other oligocarboxylic acids were found to be capable of orienting more than 50 stilbazoles toward photodimerization under these conditions.

Reversible photo/thermal solid-state transformation of a coordination polymer

A 2D coordination polymer, 1, was synthesized, characterized, and investigated with single-crystal-to-single-crystal photoreaction and thermal pyrolysis.

Step-by-step: uncommon SCSC transformation accompanied by stepwise change in the binding of a particular ligand within a mononuclear complex upon stepwise desolvation

Uncommon SCSC transformation when desolvation induces subtle changes within a mononuclear complex, namely a stepwise change in the binding of a particular ligand.

Hexadecanuclear MnII2MnIII14 Molecular Torus Built from in Situ Tandem Ligand Transformations

A mixed-valent hexadecanuclear manganese cluster, [Mn^II₂Mn^III₁₄(trz)₁₄(thetach)₄(μ₃-O)₈(H₂O)₁₀](ClO₄)₆ (Mn16), containing two Mn^II and 14 Mn^III ions, is constructed from mixed in situ generated ligands, 1,2,3-triazole (Htrz) and 1,3,5-tri(2-hydroxyethyl)-1,3,5-triazacyclohexane (H₃thetach). Remarkably, both ligands were not initially added into the reaction system, and their formations involve the in situ ligand decomposition and subsequent condensation reactions. The core of Mn16 is an elongated torus comprised of eight Mn atoms and four [Mn₂O₂] subunits bridged by oxo or alkoxide. The high-resolution electrospray ionization mass spectrometry (HR-ESI-MS) of Mn16 dissolved in CH₃CN indicates its structure remains intact as +3 and +4 species. Temperature and field dependent magnetization revealed predominantly antiferromagnetic exchange interactions within the cluster. The work provides one-pot synthesis of high-nuclearity manganese clusters using the ligands generated by in situ reactions in a tandem fashion.

Regioselective Photochemical Cycloaddition Reactions of Diolefinic Ligands in Coordination Polymers

The pure diolefinic ligand 1,4-bis(pyridin-4-yl)-1,3-butadiene (bpbde) is photostable in the crystalline state. With the assistance of coordination-driven metal-organic assemblies, the photoreactivity of this diolefinic ligand can be significantly enhanced. A hydrothermal reaction of bpbde with Cd(NO₃ )₂ ⋅4 H₂ O and the auxiliary ligand adipic acid resulted in the formation of a two-dimensional photoreactive coordination polymer (CP), [Cd(adipate)(bpbde)]_n (1). When the aliphatic carboxylic acid was replaced by pimelic acid, another photoreactive CP [Cd(pimelate)(bpbde)]_n (2) with a three-dimensional framework was obtained. With irradiation of 365 nm UV light, the bpbde ligands in crystalline 1 and 2 underwent a regioselective photochemical [2+2] cycloaddition reaction and converted to 3,4,7,8-tetra(pyridin-4-yl)tricyclo[4.2.0.0^2,5 ]octane (tptco) and 1,3-bis(pyridin-4-yl)-2,4-bis(2-(pyridin-4-yl)vinyl)cyclobutane (bpbpvcb), respectively. The results provide an interesting insight into the rational design of highly regio- or stereoselective photocatalytic reactions for the formation of special organic molecules.

Capturing the Organic Species Derived from the C-C Cleavage and in Situ Oxidation of 1,2,3,4-Tetra(pyridin-4-yl)cyclobutane by [CuCN] n-Based MOFs

The solvothermal cycloreversion and in situ oxidation of 1,2,3,4-tetra(pyridin-4-yl)cyclobutane (tpcb) within [CuCN] _n-based MOFs were investigated. The radical mechanism for the cycloreversion of tpcb ligands was supported by capturing a 1,3-butadiene species 1,2,3,4-tetra(4-pyridyl)-1,3-butadiene (tpyb) into {[Cu₁₈(μ-CN)₁₈(tpcb)₄(tpyb)₂]·H₂O} _n in the presence of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO). Without TEMPO, a furan-based ligand 2,3,4,5-tetra(4-pyridyl)furan (tpyf) was generated within {[Cu₄(μ-CN)₄(tpyf)]·4MeCN} _n via the C-C cleavage, followed by in situ oxidation in acidic condition.

Liquid-free single-crystal to single-crystal transformations in coordination polymers

Single-crystal to single-crystal (SCSC) transformations not only can create new materials, but also provide an opportunity to explore the process of forming a chemical bond. SCSC transformations discussed in this paper are confined to transformationsviaan absolutely liquid-free mode and involve the breakage and formation of new chemical bonds.

Metal-Ion Induced In Situ Ligand Oxidation for Self-Assembled Clusters: from Bis(5-(2-pyridine-2-yl)-1,2,4-triazole-3-yl)methane to Alcohol or Ketone

Hydrothermal reactions of metal nitrates and ligand bis(5-(pyridine-2-yl)-1,2,4-triazol-3-yl)methane (H₂ L¹ ) gave three cluster compounds, {Cr₂ }, {Zn₁₂ } and {Fe₈ }. Notably, methylene group of H₂ L¹ was in situ oxidized either to hydroxymethylated (L² -O)^3- in the metallo-ring {Zn₁₂ } or to a rigid carbonylated (L³ =O)^2- in the screw-type {Fe₈ }. In light of comparative experimental results, NO₃^- was deduced to be of a catalytic role in the ligand oxidation. Metal ion could be regarded as an "induced" tool for clusters generation in self-assembly process.

A crystalline zinc(ii) complex showing hollow hexagonal tubular morphology evolution, selective dye absorption and unique response to UV irradiation

A protonated mononuclear complex [Zn(Hbpvp)Cl₃] (1) is assembled by solvothermal reaction of Zn(NO₃)₂·6H₂O with 3,5-bis-(2-(pyridin-4-yl)vinyl)pyridine (bpvp) in DMF/H₂O with a few drops of concentrated HCl added.

UV-induced single-crystal-to-single-crystal conversion from a coordination ladder to a two-dimensional network through an intermolecular carbon–carbon coupling reaction

UV-induced single-crystal-to-single-crystal transformation from a coordination ladder to a two-dimensional network accompanied by photocontrolled fluorescence.

In Situ Raman Monitoring of Silver(I)-Aided Laser-Driven Cleavage Reaction of Cyclobutane

The cyclobutane cleavage reaction is an important process and has received continuous interest. Herein, we demonstrate the visible laser-driven cleavage reaction of cyclobutane in crystal form by using in situ Raman spectroscopy. Silver(I) coordination-induced strain and thermal effects from the laser irradiation are the two main driving forces for the cleavage of cyclobutane crystals. This work may open up a new avenue for studying cyclobutane cleavage reactions, as compared to the conventional routes using ex situ techniques.

Coordination assemblies of Zn(NO3)2 with 4-pyr-poly-2-ene and polycarboxylates: structural diversification and photoluminescence properties

Reactions of Zn(NO₃)₂·6H₂O with 4-pyr-poly-2-ene and five polycarboxylates afforded a series of coordination polymers with different architectures. Their thermal and photoluminescence properties were also investigated.

Alkyl linker effects on the coordination topology of ditopic di(2-pyridylmethyl)amine carboxylate ligands with ZnIIand CuII: polymersvs.macrocycles

Di(2-pyridylmethyl)amine carboxylates with short alkyl linkers afford coordination polymers whereas the longer homologues favour macrocyclic topologies.

Metal nanoparticle catalyzed cyclobutane cleavage reaction

The pyridine substituted cyclobutane cleavage reaction can be catalyzed directly by metallic silver/gold nanoparticles.

A Zn(ii) coordination polymer and its photocycloaddition product: syntheses, structures, selective luminescence sensing of iron(iii) ions and selective absorption of dyes

Nanospheres of a Zn(ii) complex are used to selectively sense iron(iii) ions while its photocycloaddition product can selectively absorb dyes.

Photoreactivity of polymorphs of a ladder polymer with criss-cross and parallel orientations of C=C bonds

Two polymorphic forms of a ladder coordination polymer [Zn2(μ-O2C-p-Tol)2(O2C-p-Tol)2(bpe)2] have parallel and criss-cross alignments of the C=C bond pairs. Both polymorphs undergo 100% [2+2] cycloaddition reaction but the one with a parallel orientation of C=C bonds (thermodynamic product) retains its single crystallinity after the reaction.