The first structural confirmation of a C102 fullerene as C102Cl20 containing a non-IPR carbon cage

Structural Studies of Giant Empty and Endohedral Fullerenes

Structure elucidations of giant fullerenes composed of 100 or more carbon atoms are severely hampered by their extremely low yield, poor solubility and huge numbers of possible cage isomers. High-temperature exohedral chlorination followed by X-ray single crystal diffraction studies of the chloro derivatives offers a practical solution for structure elucidations of giant fullerenes. Various isomers of giant fullerenes have been determined by this method, specially, non-classical giant fullerenes containing heptagons generated by the skeletal transformations of carbon cages. Alternatively, giant fullerenes can be also stabilized by encapsulating metal atoms or clusters through intramolecular electron transfer from the encapsulated species to the outer fullerene cage. In this review, we present a comprehensive overview on synthesis, separation and structural elucidation of giant fullerenes. The isomer structures, chlorination patterns of a series of giant fullerenes C_2n (2n = 100-108) and heptagon-containing non-classical fullerenes derived from giant fullerenes are summarized. On the other hand, giant endohedral fullerenes bearing different endohedral species are also discussed. At the end, we propose an outlook on the future development of giant fullerenes.

Strain Release of Fused Pentagons in Fullerene Cages by Chemical Functionalization

According to the isolated pentagon rule (IPR), for stable fullerenes, the 12 pentagons should be isolated from one another by hexagons, otherwise the fused pentagons will result in an increase in the local steric strain of the fullerene cage. However, the successful isolation of more than 100 endohedral and exohedral fullerenes containing fused pentagons over the past 20 years has shown that strain release of fused pentagons in fullerene cages is feasible. Herein, we present a general overview on fused-pentagon-containing (i.e. non-IPR) fullerenes through an exhaustive review of all the types of fused-pentagon-containing fullerenes reported to date. We clarify how the strain of fused pentagons can be released in different manners, and provide an in-depth understanding of the role of fused pentagons in the stability, electronic properties, and chemical reactivity of fullerene cages.

Chlorination-Promoted Skeletal Transformations of Fullerenes

Classical fullerenes are built of pentagonal and hexagonal rings, and the conventional syntheses produce only those isomers that obey the isolated-pentagon rule (IPR), where all pentagonal rings are separated from each other by hexagonal rings. Upon exohedral derivatization, the IPR fullerene cages normally retain their connectivity pattern. However, it has been discovered that high-temperature chlorination of fullerenes with SbCl₅ or VCl₄ can induce skeletal transformations that alter the carbon cage topology, as directly evidenced by single crystal X-ray diffraction studies of the chlorinated products of a series of fullerenes in the broad range of C₆₀ to C₁₀₂. Two general types of transformations have been identified: (i) the Stone-Wales rearrangement (SWR) that consists of a rotation of a C-C bond by 90°, and (ii) the removal of a C-C bond, i.e., C₂ loss (C2L). Single- or multistep SWR and/or C2L transformations afford either classical non-IPR fullerenes bearing fused pentagons (highlighted in red in the TOC picture) or nonclassical (NCx) fullerenes with x = 1-3 heptagonal rings (highlighted in blue in the TOC picture) often flanked by fused pentagons. Several subtypes of the SWR and C2L processes can be further discerned depending on the local topology of the transformed region of the cage. Under the chlorination conditions, the non-IPR and NC carbon cages that would be energetically unfavorable and mostly labile in their pristine state are instantaneously stabilized by chlorination of the pentagon-pentagon junctions and by delimitation of the original spherical π-system into smaller favorable aromatic fragments. The significance of the chlorination-promoted skeletal transformations within the realm of fullerene chemistry is demonstrated by the growing body of examples. To date, these include single- and multistep SWRs in the buckminsterfullerene C₆₀ and in the higher fullerenes C₇₆(1), C₇₈(2), C₈₂(3), and C102(19), single and multistep C2Ls (i.e., cage shrinkage) in C₈₆(16), C₈₈(33), C₉₀(28), C₉₂(50), C₉₆(80), C₉₆(114), and C102(19), and multistep combinations of SWRs and C2Ls in C₈₈(3), C₈₈(33), and C₁₀₀(18), (IPR isomer numbering in parentheses is according to the spiral algorithm). Remarkably, an IPR precursor can give rise to versatile transformed chlorinated fullerene cages formed via branched pathways. The products can be recovered either in their initial chlorinated form or as more soluble CF₃/F derivatives obtained by an additional trifluoromethylation workup. Reconstruction of the skeletal transformation pathways is often complicated due to the lack of the isolable intermediate products in the multistep cases. Therefore, it is usually based on the principle of selecting the shortest pathways between the starting and the final cage. The quantum-chemical calculations illustrate the detailed mechanisms of the SWR and C2L transformations and the thermodynamic driving forces behind them. A particularly important aspect is the interplay between the chlorination patterns and the regiochemistry of the skeletal transformations.

Salvaging Reactive Fullerenes from Soot by Exohedral Derivatization

The awesome allotropy of carbon yields innumerable topologically possible cage structures of molecular carbon. This field is also related to endohedral metallofullerenes constructed by metal-atom encapsulation. Stable and soluble empty fullerenes and endohedral metallofullerenes are available in pure form in macroscopic amounts from carbon arc production or other physical processes followed by extraction and subsequent chromatographic separation. However, many other unidentified fullerene species, which must be reactive and insoluble in their pristine forms, remain in soot. These "missing" species must have extremely small HOMO-LUMO gaps and may have unconventional cage structures. Recent progress in this field has demonstrated that reactive fullerenes can be salvaged by exohedral derivatization, which can stabilize the reactive carbon cages. This concept provides a means of preparing macroscopic amounts of unconventional fullerenes as their derivatives.

Formation of C2v-C72(11188)Cl4: A Particularly Stable Non-IPR Fullerene

Halogenation has been one of the most used strategies to explore the reactivity of empty carbon cages. In particular, the higher reactivity of non-IPR fullerenes, i.e., those fullerenes that do not satisfy the isolated pentagon rule (IPR), has been used to functionalize and capture these less stable fullerenes. Here, we have explored the stability of the non-IPR isomer C₇₂(11188) with C_2v symmetry, which is topologically linked to the only IPR isomer of C₇₀, as well as its reactivity to chlorination. DFT calculations and Car-Parrinello molecular dynamics simulations suggest that chlorination takes places initially in nonspecific sites, once carbon cages are formed. When the temperature in the arc reactor decreases sufficiently, Cl atoms are trapped on the fullerene surface, migrating from not-so-favored positions to reach the most favored sites in the pentalene. We have also discussed why cage C_2v-C₇₂(11188) is found to take four chlorines, whereas cage C₁-C₇₄(14049) is observed to capture 10 of them, even though these two fullerenes are closely related by a simple C₂ insertion.

Chlorination-promoted skeletal transformation of IPR C76 discovered via trifluoromethylation under the formation of non-IPR C76(CF3)nFm

High-temperature chlorination of IPR D₂-C₇₆ followed by trifluoromethylation resulted in X-ray structures of non-classical, non-IPR C₇₆(CF₃)₁₄, C₇₆(CF₃)₁₄F₂, and C₇₆(CF₃)₁₆F₆.

Versatility of chlorination-promoted skeletal transformation pathways in C76 fullerene

Chlorination-promoted cage transformations in C₇₆ produce a new non-IPR C₇₆Cl₃₀ molecule revealing the considerable versatility of concurrently accessible skeletal transformation pathways.

Experimental and Theoretical Approach to Variable Chlorination-Promoted Skeletal Transformations in Fullerenes: The Case of C102

The first example of three alternative chlorination-promoted skeletal transformation pathways in the same fullerene cage is presented. Isolated-pentagon-rule (IPR) C₁₀₂(19) undergoes both Stone-Wales rotations to give non-IPR ^#283794C₁₀₂Cl₂₀ and C₂ losses to form nonclassical C₉₈ and non-IPR C₉₆. X-ray structural characterization of the transformation products and a theoretical study of their formation pathways are reported.

Skeletal Transformation of a Classical Fullerene C88 into a Nonclassical Fullerene Chloride C84Cl30 Bearing Quaternary Sequentially Fused Pentagons

A classical fullerene is composed of hexagons and pentagons only, and its stability is generally determined by the Isolated-Pentagon-Rule (IPR). Herein, high-temperature chlorination of a mixture containing a classical IPR-obeying fullerene C₈₈ resulted in isolation and X-ray crystallographic characterization of non-IPR, nonclassical (NC) fullerene chloride C₈₄(NC2)Cl₃₀ (1) containing two heptagons. The carbon cage in C₈₄(NC2)Cl₃₀ contains 14 pentagons, 12 of which form two pairs of fused pentagons and two groups of quaternary sequentially fused pentagons, which have never been observed in reported carbon cages. All 30 Cl atoms form an unprecedented single chain of ortho attachments on the C₈₄ cage. A reconstruction of the pathway of the chlorination-promoted skeletal transformation revealed that the previously unknown IPR isomer C₈₈(3) is converted into 1 by two losses of C₂ fragments followed by two Stone-Wales rearrangements, resulting in the formation of very stable chloride with rather short C-Cl bonds.

Chloro Derivatives of Isomers of a Giant Fullerene C104 : C104 (234)Cl16/18 , C104 (812)Cl12/24 , and C104 (811)Cl28

The chemistry of a giant fullerene, C₁₀₄ , has been extended by the synthesis and structural study of several chloro derivatives of three isolated pentagon rule (IPR) isomers of C₁₀₄ nos. 234, 812, and 811. In the structure of C₁₀₄ (234)Cl_16/18 , two molecules with 16 and 18 attached Cl atoms occupy the same crystallographic site with an occupancy ratio of 61/39. The structures of C₁₀₄ (812)Cl₁₂ and C₁₀₄ (812)Cl₂₄ demonstrate substructure relationships of their chlorination patterns with single and double Cl attachments to 12 cage pentagons. The structure of C₁₀₄ (811)Cl₂₈ is compared with the known C₁₀₄ (811)Cl₂₄ thus revealing dramatic changes in the chlorination pattern, which occur with relatively small increases in the degree of chlorination.

New Giant Fullerenes Identified as Chloro Derivatives: Isolated-Pentagon-Rule C108(1771)Cl12 and C106(1155)Cl24 as well as Nonclassical C104Cl24

High temperature chlorination of HPLC fractions of higher fullerenes followed by single crystal X-ray diffraction with the use of synchrotron radiation resulted in the structure determination of IPR C106(1155)Cl24 and IPR C108(1771)Cl12. C106(1155)Cl24 is cocrystallized with C104Cl24, a chloride of the nonclassical isomer of C104. The moderately stable isomer C106(1155) and the most stable C108(1771) represent so far the largest pristine fullerenes with known cages.

Isolation and Crystallographic Characterization of La2C2@Cs(574)-C102 and La2C2@C2(816)-C104: Evidence for the Top-Down Formation Mechanism of Fullerenes

Tubular higher fullerenes are prototypes of finite-length end-capped carbon nanotubes (CNTs) whose structures can be accurately characterized by single-crystal X-ray diffraction crystallography. We present here the isolation and crystallographic characterization of two unprecedented higher fullerenes stabilized by the encapsulation of a La2C2 cluster, namely, La2C2@Cs(574)-C102, which has a perfect tubular cage corresponding to a short (10, 0) zigzag carbon nanotube, and La2C2@C2(816)-C104 which has a defective cage with a pyracylene motif inserting into the cage waist. Both cages provide sufficient spaces for the large La2C2 cluster to adopt a stretched and nearly planar configuration, departing from the common butterfly-like configuration which has been frequently observed in midsized carbide metallofullerenes (e.g., Sc2C2@C80-84), to achieve strong metal-cage interactions. More meaningfully, our crystallographic results demonstrate that the defective cage of C2(816)-C104 is a starting point to form the other three tubular cages known so far, i.e., D5(450)-C100, Cs(574)-C102, and D3d(822)-C104, presenting evidence for the top-down formation mechanism of fullerenes. The fact that only the large La2C2 cluster has been found in giant fullerene cages (C>100) and the small clusters M2C2 (M = Sc, Y, Er, etc.) are present in midsized fullerenes (C80-C86) indicates that geometrical matching between the cluster and the cage, which ensures strong metal-cage interactions, is an important factor controlling the stability of the resultant metallofullerenes, in addition to charge transfer.

New Isolated-Pentagon-Rule and Skeletally Transformed Isomers of C100 Fullerene Identified by Structure Elucidation of their Chloro Derivatives

High-temperature chlorination of C100 fullerene followed by X-ray structure determination of the chloro derivatives enabled the identification of three isomers of C100 from the fullerene soot, specifically numbers 18, 425, and 417, which obey the isolated pentagon rule (IPR). Among them, isomers C1-C100 (425) and C2-C100 (18) afforded C1-C100 (425)Cl22 and C2-C100 (18)Cl28/30 compounds, respectively, which retain their IPR cage connectivities. In contrast, isomer C2v -C100 (417) gives Cs -C100 (417)Cl28 which undergoes a skeletal transformation by the loss of a C2  fragment, resulting in the formation of a nonclassical (NC) C1-C98 (NC)Cl26 with a heptagon in the carbon cage. Most probably, two nonclassical C1-C100 (NC)Cl18/22 chloro derivatives originate from the IPR isomer C1-C100 (382), although both C1-C100 (344) and even nonclassical C1-C100 (NC) can be also considered as the starting isomers.

Capturing an unstable C100 fullerene as chloride, C100(1)Cl12, with a nanotubular carbon cage

The chlorination of a HPLC C100 fraction afforded C100(1)Cl12 with an unprecedented nanotubular carbon cage of a highly unstable D5d-C100 fullerene.

C100 is Converted into C94 Cl22 by Three Chlorination-Promoted C2 Losses under Formation and Elimination of Cage Heptagons

Chlorination of the C100 (18) fullerene with a mixture of VCl4 and SbCl5 gives rise to branched skeletal transformations affording non-classical (NC) C94 (NC1)Cl22 with one heptagon in the carbon cage together with the previously reported C96 (NC3)Cl20 with three heptagons. The three-step pathway to C94 (NC1)Cl22 starts with two successive C2 losses of 5:6 CC bonds to give two cage heptagons, whereas the third C2 loss of the 5:5 CC bond from a pentalene fragment eliminates one of the heptagons. Quantum-chemical calculations demonstrate that the two unusual skeletal transformations-creation of a heptagon in C96 (NC3)Cl20 through a Stone-Wales rearrangement and the presently reported elimination of a heptagon through C2 loss-are both characterized by relatively low activation energy.

Synthesis and characterization of bis-triruthenium cluster derivatives of an all equatorial [60]fullerene tetramalonate

The parallel-[Ru₃(CO)₉]₂{μ₃-η²,η²,η²-C₆₀[C(COOC₂H₅)₂]₄} is the first complex where the two face-capping trinuclear metallic clusters coordinate to C₆₀ on opposite sites, in a parallel orientation.

The most stable isomers of giant fullerenes C102 and C104 captured as chlorides, C102(603)Cl18/20 and C104(234)Cl16/18/20/22

The chlorination of HPLC fractions with pristine giant fullerenes, C102 and C104, followed by X-ray crystallographic study of chlorides, C102(603)Cl18/20 and C104(234)Cl16-22, confirmed the presence of the most stable IPR (IPR = Isolated Pentagon Rule) isomers, C102(603) and C104(234), in the fullerene soot. The discussion concerns the chlorination patterns of polychlorides and relative stability of pristine isomers of C102 and C104 fullerenes.

Chlorination of IPR C100 fullerene affords unconventional C96 Cl20 with a nonclassical cage containing three heptagons

Chlorination of C100 fullerene with a mixture of VCl4 and SbCl5 afforded C96Cl20 with a strongly unconventional structure. In contrast to the classical fullerenes containing only hexagonal and pentagonal rings, the C96 cage contains three heptagonal rings and, therefore, should be classified as a fullerene with a nonclassical cage (NCC). There are several types of pentagon fusions in the C96 cage including pentagon pairs and pentagon triples. The three-step pathway from isolated-pentagon-rule (IPR) C100 to C96(NCC-3hp) includes two C2 losses, which create two cage heptagons, and one Stone-Wales rotation under formation of the third heptagon. Structural reconstruction established C100 isomer no. 18 from 450 topologically possible IPR isomers as the starting C100 fullerene. Until now, no pristine C100 isomers have been confirmed based on the experimental results.

First isomers of pristine C104 fullerene structurally confirmed as chlorides, C104(258)Cl16 and C104(812)Cl24

Isolation and characterization of very large fullerenes is hampered by a drastic decrease of their content in fullerene soot with increasing fullerene size and a simultaneous increase of the number of possible IPR (Isolated Pentagon Rule) isomers. In the present work, fractions containing mixtures of C102 and C104 were isolated in very small quantities (several dozens of micrograms) by multi-step recycling HPLC from an arc-discharge fullerene soot. Two such fractions were used for chlorination with a VCl4/SbCl5 mixture in glass ampoules at 350-360 °C. The resulting chlorides were investigated by single-crystal X-ray diffraction using synchrotron radiation. By this means, two IPR isomers of C104 , numbers 258 and 812 (of 823 topologically possible isomers), have been confirmed for the first time as chlorides, C1 -C104(258)Cl16 and D2-C104 (812)Cl24, respectively, while an admixture of C2 -C104(811)Cl24 was assumed to be present in the latter chloride. DFT calculations showed that pristine C104(812) belongs to rather stable C104 cages, whereas C104(258) is much less stable.