Green Synthesis of CdS and CdS/rGO Nanocomposites: Evaluation of Electrochemical, Antimicrobial, and Photocatalytic Properties

The green approach has been employed for the synthesis of various types of nanomaterials including metal nanoparticles, metal oxides, and carbon-based nanomaterials. These processes involve natural sources that contain bioactive compounds that act as reducing, stabilizing, and capping agents for the formation and stabilization of nanomaterials. This study reports the green synthesis of CdS and CdS/rGO nanocomposites using Lactobacillus bacteria. The UV-visible spectrophotometer, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Raman spectroscopy, and Fourier transform infrared spectroscopy spectra confirm the synthesis of the nanocomposite. The electrochemical characterization using cyclic voltammetry, differential pulse voltammetry, and EIS revealed that the CdS/rGO nanocomposites showed a higher electron transfer rate compared with CdS nanoparticles, indicating the potential of the nanocomposites for biosensing applications. The zone of inhibition revealed significant antimicrobial activity against Escherichia coli and Staphylococcus aureus for both CdS nanoparticles and CdS/rGO nanocomposites. Additionally, CdS/rGO nanoparticles exhibited high photocatalytic activity for the degradation of methylene blue dye. Overall, this study demonstrates that the synthesized CdS and CdS/rGO nanocomposites have good electrochemical properties, photocatalytic, and antimicrobial activity and, therefore, can be employed for various applications such as biosensing, photocatalysis, and antimicrobial activity.

Ultra-Sensitive and Fast Humidity Sensors Based on Direct Laser-Scribed Graphene Oxide/Carbon Nanotubes Composites

In this paper, the relative humidity sensor properties of graphene oxide (GO) and graphene oxide/multiwalled nanotubes (GO/MWNTs) composites have been investigated. Composite sensors were fabricated by direct laser scribing and characterized using UV-vis-NIR, Raman, Fourier transform infrared, and X-ray photoemission spectroscopies, electron scanning microscopy coupled with energy-dispersive X-ray analysis, and impedance spectroscopy (IS). These methods confirm the composite homogeneity and laser reduction of GO/MWNT with dominant GO characteristics, while ISresults analysis reveals the circuit model for rGO-GO-rGO structure and the effect of MWNT on the sensor properties. Although direct laser scribing of GO-based humidity sensor shows an outstanding response (|ΔZ|/|Z| up to 638,800%), a lack of stability and repeatability has been observed. GO/MWNT-based humidity sensors are more conductive than GO sensors and relatively less sensitive (|ΔZ|/|Z| = 163,000%). However, they are more stable in harsh humid conditions, repeatable, and reproducible even after several years of shelf-life. In addition, they have fast response/recovery times of 10.7 s and 9.3 s and an ultra-fast response time of 61 ms when abrupt humidification/dehumidification is applied by respiration. All carbon-based sensors' overall properties confirm the advantage of introducing the GO/MWNT hybrid and laser direct writing to produce stable structures and sensors.

Docking studies and thiourea-mediated reduced graphene oxide nanosheets' larvicidal efficacy against Culexquinquefasciatus

The larvicidalproperty of graphene oxide (GO) and thiourea-reduced graphene oxide (T-rGO)was assessed against Culexquinquefasciatuslarvae. A simple water-soluble material synthesis method was used. The transformation of graphene into graphene oxide was accomplished in a single step. Under mild conditions, grapheneoxidewasdissolved in water to form a solution. Structure, optical, and microstructural features of the synthesized samples wereevaluatedusing a variety of analytical tools to compare the samples. Both GO and RGO, as well as GO, showed strong larvicidal potential when used against the third instar larvae of the Culexquinquefasciatus mosquito, with LC₅₀and LC₉₀values of 1.71 and 5.17 ppm and 1.89 and 5.00 ppm, respectively. As a result, our study showed that all of the GO and T-rGO under investigation create larvicidal compounds that could be employed to support efforts to control mosquito populations. It also offers an alternative method for producing GO and rGO on a big scale, which may be used in the future for a variety of biomedical applications.The binding efficacy of the active compounds against AChE1 was studied using Auto dock and the results were observed to be highly promising.

A review of graphene-based semiconductors for photocatalytic degradation of pollutants in wastewater

Water is the lifeblood of all living things; we often overlook the fact that the water cycle and the life cycle are inextricably linked. However, it has become contaminated as a result of industrialization, which has impacted the ecosystem by emitting numerous dyes, organic solvents, petroleum products, heavy metals, chemicals, diseases, and solid wastes. The absence of treatment in reusing wastewater is the root of the issues. Hence it is essential to treat the water to preserve the ecosystem and also for human health. In recent years, graphene-based photocatalysts are attracted much in the waste water treatment process due to their outstanding physical, chemical, and mechanical properties. Since in the graphene-based photocatalyst, graphene has exceptional electron conductivity, a broad range of light absorption, a large surface area, and a high adsorption capacity. When it is integrated into metals, metal-containing nanocomposites, semiconductor nanocomposites, polymers, MXene, and other compounds, it can greatly boost the photocatalytic activity towards the photo destruction of contaminants. Hence in this review, water pollution, methods of waste water treatment, fundamental principles of photocatalysis, the photocatalytic activity of other materials in wastewater treatment, and how the photocatalytic efficiency against the removal of organic dyes can be enhanced when coalesced with graphene are detailed.

Langmuir-Blodgett Graphene-Based Films for Algal Biophotovoltaic Fuel Cells

The prevalence of photosynthesis, as the major natural solar energy transduction mechanism or biophotovoltaics (BPV), has always intrigued mankind. Over the last decades, we have learned to extract this renewable energy through continuously improving solid-state semiconductive devices, such as the photovoltaic solar cell. Direct utilization of plant-based BPVs has, however, been almost impracticable so far. Nevertheless, the electrochemical platform of fuel cells (FCs) relying on redox potentials of algae suspensions or biofilms on functionalized anode materials has in recent years increasingly been demonstrated to produce clean or carbon-negative electrical power generators. Interestingly, these algal BPVs offer unparalleled advantages, including carbon sequestration, bioremediation and biomass harvesting, while producing electricity. The development of high performance and durable BPVs is dependent on upgraded anode materials with electrochemically dynamic nanostructures. However, the current challenges in the optimization of anode materials remain significant barriers towards the development of commercially viable technology. In this context, two-dimensional (2D) graphene-based carbonaceous material has widely been exploited in such FCs due to its flexible surface functionalization properties. Attempts to economically improve power outputs have, however, been futile owing to molecular scale disorders that limit efficient charge coupling for maximum power generation within the anodic films. Recently, Langmuir-Blodgett (LB) film has been substantiated as an efficacious film-forming technique to tackle the above limitations of algal BPVs; however, the aforesaid technology remains vastly untapped in BPVs. An in-depth electromechanistic view of the fabrication of LB films and their electron transference mechanisms is of huge significance for the scalability of BPVs. However, an inclusive review of LB films applicable to BPVs has yet to be undertaken, prohibiting futuristic applications. Consequently, we report an inclusive description of a contextual outline, functional principles, the LB film-formation mechanism, recent endeavors in developing LB films and acute encounters with prevailing BPV anode materials. Furthermore, the research and scale-up challenges relating to LB film-integrated BPVs are presented along with innovative perceptions of how to improve their practicability in scale-up processes.

Proton exchange membrane based on graphene oxide/polysulfone hybrid nano-composite for simultaneous generation of electricity and wastewater treatment

Microbial fuel cell (MFC) is a combined technology for simultaneous generation of electricity and wastewater treatment. In MFC, the proton exchange membrane (PEM) is an essential component affecting electricity generation. In the current study, two proton exchange membranes, namely sulfonated polyethersulfone (SPES) and graphene oxide/sulfonated -polyethersulfone hybrid nanocomposite (GO-SPES), were prepared and characterized using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The collected information confirmed the successful preparation of the membranes. Moreover, contact angle measurements, ion exchange capacity and degree of sulfonation of the prepared membranes were determined. The results showed that the introduction of GO nanoparticles into SPES membrane improved its proton exchange capability and resulted in better performance. The power density and the current generated from SPES membrane were 60 mW/m² and 425 mA/m², respectively. For GO-SPES, the obtained power density was 101.2 mW/m² and the current was 613 mA/m². Both membranes showed comparable chemical oxygen demand (COD) removal efficiency of about 80%; suggesting that the prepared membranes are working efficiently in wastewater treatment as PEMs in MFCs. As a final point, the performance of GO-SPES membrane was compared to the performance of the well-known Nafion® 117 membrane and the results were promising. To conclude, the GO-SPES membrane is an outstanding membrane for use as PEM in MFCs for simultaneous generation of electricity and wastewater treatment.

Nanoscale chemical mapping of oxygen functional groups on graphene oxide using atomic force microscopy-coupled infrared spectroscopy

The unambiguous determination of the chemical functionality over graphene oxide (GO) is important to unleash its potential applications. However, the mapping of oxygen functionalities distribution remains to be unequivocally determined because of highly inhomogeneous non-stoichiometric structures and ultra-thin layers of GO. In this study, we report an experimental observation of the spatial distribution of oxygen functional groups on monolayer and multilayer GO using AFM-IR, atomic force microscopy coupled with infrared spectroscopy. Overcoming conventional IR diffraction limit for several micrometers, the novel AFM-IR reaches high spatial resolution ∼20 nm and could detect IR absorption on ∼1 nm thickness of monolayer GO. With nanoscale chemical mapping, the distribution of different oxygen functional groups is distinguished with AFM-IR over the GO surface. It allows us to observe that these oxygen functional groups prefer to sit on the fold areas, in discrete domains and on the edges of GO, which gave more insights into its chemical nature. The determination of the position of functional groups through precise imaging contributes to our understanding of GO structure-properties relations and paves the way for targeted tethering of polymers, biomaterials, and other nanostructures.

Oral administration of graphene oxide nano-sheets induces oxidative stress, genotoxicity, and behavioral teratogenicity in Drosophila melanogaster

The current study checks the effect of various concentrations of dietary graphene oxide (GO) nano-sheets on the development of Drosophila melanogaster. GO was synthesized and characterized by XRD, FTIR, FESEM, and TEM analytical techniques. Various concentrations of GO were mixed with the fly food and flies were transferred to the vial. Various behavioral and morphological as well as genetic defects were checked on the different developmental stages of the offspring. In the larval stage of development, the crawling speed and trailing path change significantly than the control. GO induces the generation of oxygen radicals within the larval hemolymph as evidenced by nitroblue tetrazolium assay. GO induces DNA damage within the gut cell, which was detected by Hoechst staining and within hemolymph by comet assay. Adult flies hatched after GO treatment show defective phototaxis and geotaxis behavior. Besides behavior, phenotypic defects were observed in the wing, eye, thorax bristles, and mouth parts. At 300 mg/L concentration, wing spots were observed. Altogether, the current study finds oral administration of GO which acts as a mutagen and causes various behavioral and developmental defects in the offspring. Here for the first time, we are reporting GO, which acts as a teratogen in Drosophila, besides its extensive medical applications.

Acidic Site-Assisted Ammonia Sensing of Novel CuSbS2 Quantum Dots/Reduced Graphene Oxide Composites with an Ultralow Detection Limit at Room Temperature

Novel CuSbS₂ quantum dots (QDs)/reduced graphene oxide (rGO) composites are self-assembled via a hot-injection method, and CuSbS₂ QDs exhibit a near monodispersion on the rGO surface. The gas sensors based on CuSbS₂ QDs/rGO composites show the relatively good gas responses toward NH₃ with an outstanding detection limit of 500 ppb and an average response time of 50 s at room temperature, and visible light illumination is proven to further promote the sensing performance of the composites. The study of the sensing mechanism reveals that the acidic sites on the surface play an extremely important role in NH₃ adsorption of the composites, and the reaction between NH₃ molecules and the pre-adsorbed oxygen ions finally leads to the generation of NO molecules. The synergistic effect existing between CuSbS₂ QDs and rGO, in terms of electron transfer, is certified as well.

Green preparation and characterization of graphene oxide/carbon nanotubes-loaded carboxymethyl cellulose nanocomposites

In this study, a homogeneous and stable dispersion of graphene oxide (GO)/carbon nanotube (CNT) complexes (GCCs) was obtained by dispersing CNTs in an aqueous solution using GO in the absence of dispersing agents. Furthermore, carboxymethyl cellulose/GCC (CMC/GCC) nanocomposite films were prepared by a simple solution mixing-evaporation method. The dispersibility of the GCCs with different CNT contents was investigated by UV-Vis spectrophotometry. The morphological and crystalline structures of the samples were analyzed by transmission electron microscopy, scanning electron microscopy, and X-ray diffraction. X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy were conducted to identify the chemical composition of GO, CNTs, and GCCs. These results revealed that CNTs could be stably dispersed in water using GO. In addition, when CMC/GCC nanocomposite films were prepared by mixing CMC and GCCs, CNTs were uniformly dispersed in the CMC matrix. The tensile behavior was investigated using a universal testing machine. The tensile strength and Young’s modulus of the CMC/GCC nanocomposite films were significantly improved by up to about 121% and 122%, respectively, compared to those of pure CMC because of uniform and strong π-π interfacial interactions between CNTs and CMC polymer.

A Novel Biomolecule-Mediated Reduction of Graphene Oxide: A Multifunctional Anti-Cancer Agent

Graphene oxide (GO) is a monolayer of carbon atoms that form a dense honeycomb structure, consisting of hydroxyl and epoxide functional groups on the two accessible sides and carboxylic groups at the edges. In contrast, graphene is a two-dimensional sheet of sp2-hybridized carbon atoms packed into a honeycomb lattice. Graphene has great potential for use in biomedical applications due to its excellent physical and chemical properties. In this study, we report a facile and environmentally friendly approach for the synthesis of reduced graphene oxide (rGO) using uric acid (UA). The synthesized uric acid-reduced graphene oxide (UA-rGO) was fully characterized by ultraviolet-visible (UV-Vis) absorption spectra, X-ray diffraction (XRD), dynamic light scattering (DLS), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and Raman spectroscopy. GO and UA-rGO induced a dose-dependent decrease in cell viability and induced cytotoxicity in human ovarian cancer cells. The results from this study suggest that UA-rGO could cause apoptosis in mammalian cells. The toxicity of UA-rGO is significantly higher than GO. Based on our findings, UA-rGO shows cytotoxic effects against human ovarian cancer cells, and its synthesis is environmentally friendly. UA-rGO significantly inhibits cell viability by increasing lactate dehydrogenase (LDH) release, reactive oxygen species (ROS) generation, activation of caspase-3, and DNA fragmentation. This is the first report to describe the comprehensive effects of UA-rGO in ovarian cancer cells. We believe that the functional aspects of newly synthesized UA-rGO will provide advances towards various biomedical applications in the near future.

Minuscule weight percent of graphene oxide and reduced graphene oxide modified Ag3PO4: new insight into improved photocatalytic activity

Improved photocatalytic activity of controllably reduced and minuscule weight percent graphene oxide modified Ag₃PO₄ composite.

Fabrication and study of optical and electrochemical properties of CdS nanoparticles and the GO–CdS nanocomposite

CdS NPs and the GO–CdS nanocomposite with excellent optical and electrochemical properties were synthesized using a new method.

Synthesis, characterization and antibacterial activity of Ag incorporated ZnO–graphene nanocomposites

One pot low temperature synthesis of silver incorporated ZnO–chemically converted graphene nanocomposites is reported. An optimum of 10% Ag incorporated sample at 6.25 μg ml⁻¹ dose shows an excellent antibacterial activity on E. coli and S. aureus.

Fabrication of CdS/BNNSs nanocomposites with broadband solar absorption for efficient photocatalytic hydrogen evolution

A high efficiency of the photocatalytic H₂ production was achieved using BNNSs decorated with CdS as photocatalysts.

Reduced graphene oxide/gold nanoparticle aerogel for catalytic reduction of 4-nitrophenol

Fabrication of reduced graphene oxide/gold nanoparticle aerogel for catalytic reduction of 4-nitrophenol.

Aptasensor based on tripetalous cadmium sulfide-graphene electrochemiluminescence for the detection of carcinoembryonic antigen

A facile label-free electrochemiluminescence (ECL) aptasensor, based on the ECL of cadmium sulfide-graphene (CdS-GR) nanocomposites with peroxydisulfate as the coreactant, was designed for the detection of carcinoembryonic antigen (CEA). Tripetalous CdS-GR nanocomposites were synthesized through a simple onepot solvothermal method and immobilized on the glassy carbon electrode surface. L-Cystine (L-cys) could largely promote the electron transfer and enhance the ECL intensity. Gold nanoparticles (AuNPs) were assembled onto the L-cys film modified electrode for aptamer immobilization and ECL signal amplification. The aptamer modified with thiol was adsorbed onto the surface of the AuNPs through a Au-S bond. Upon hybridization of the aptamer with the target protein, the sequence could conjugate CEA to form a Y architecture. With CEA as a model analyte, the decreased ECL intensity is proportional to the CEA concentration in the range of 0.01-10.0 ng mL(-1) with a detection limit of 3.8 pg mL(-1) (S/N = 3). The prepared aptasensor was applied to the determination of CEA in human serum samples. The recoveries of CEA in the human serum samples were between 85.0% and 109.5%, and the RSD values were no more than 3.4%.

Quantum confined CdS inclusion in graphene oxide for improved electrical conductivity and facile charge transfer in hetero-junction solar cell

Simple surface functionalization of GO was employed with the quantum confined CdS towards the fabrication of pn hetero-junction based solar cell.

Encapsulating Bi2Ti2O7 (BTO) with reduced graphene oxide (RGO): an effective strategy to enhance photocatalytic and photoelectrocatalytic activity of BTO

Multimetal oxides (AxByOz) offer a higher degree of freedom compared to single metal oxides (AOx) in that these oxides facilitate (i) designing nanomaterials with greater stability, (ii) tuning of the optical bandgap, and (iii) promoting visible light absorption. However, all AxByOz materials such as pyrochlores (A2B2O7)--referred to here as band-gap engineered composite oxide nanomaterials or BECONs--are traditionally prone to severe charge recombination at their surface. To alleviate the charge recombination, an effective strategy is to employ reduced graphene oxide (RGO) as a charge separator. The BECON and the RGO with oppositely charged functional groups attached to them can be integrated at the interface by employing a simple electrostatic self-assembly approach. As a case study, the approach is demonstrated using the Pt-free pyrochlore bismuth titanate (BTO) with RGO, and the application of the composite is investigated for the first time. When tested as a photocatalyst toward hydrogen production, an increase of ∼ 250% using BTO in the presence of RGO was observed. Further, photoelectrochemical measurements indicate an enhancement of ∼ 130% in the photocurrent with RGO inclusion. These two results firmly establish the viability of the electrostatic approach and the inclusion of RGO. The merits of the RGO addition is identified as (i) the RGO-assisted improvement in the separation of the photogenerated charges of BTO, (ii) the enhanced utilization of the charges in a photocatalytic process, and (iii) the maintenance of the BTO/RGO structural integrity after repeated use (established through reusability analysis). The success of the self-assembly strategy presented here lays the foundation for developing other forms of BECONs, belonging to perovskites (ABO3), sillenite (A12BO20), or delafossite (ABO2) groups, hitherto written off due to limited or no photoelectrochemicalactivity.

Highly enhanced photocatalytic properties of ZnS nanowires–graphene nanocomposites

ZnS–graphene nanocomposites exhibit excellent photocatalytic activity for degradation of methylene blue under UV light irradiation.