pH sensitive tubules of a bile acid derivative: a tubule opening by release of wall leaves

Development of biomaterials for bone tissue engineering based on bile acids

Diseases and injuries can cause significant bone loss, leading to increased medical expenses, decreased work efficiency, and a decline in quality of life. Bone tissue engineering (BTE) is gaining attention as an alternative to autologous and allogeneic transplantation due to the limited availability of donors. Biomaterials represent a promising strategy for bone regeneration, and their design should consider the three key processes in bone tissue engineering: osteogenesis, bone conduction, and bone induction. Certain bile acids (BAs) demonstrate significant antioxidant, anti-inflammatory, and immunosuppressive properties, and effectively promote bone and tissue regeneration. Additionally, the combination of BA molecule with other biological materials can help overcome problems associated with limited local bone regeneration and maintain a defined release state for a long time. Thus in this review, we focus on the role and the mechanism of bile acids in bone healing under different conditions, highlighting their unique properties and applications in gel fabrication, microencapsulation, and nanotechnology. These advancements serve as a basis for the advancement of biomaterials derived from BAs, specifically for the purpose of bone reconstruction.

Stimuli-Responsive Transformable Supramolecular Nanotubes

Supramolecular nanotubes produced by self-assembly of organic molecules can have unique structural features such as a one-dimensional morphology with no branching, distinguishable inner and outer surfaces and membrane walls, or a structure that is hollow and has a high aspect ratio. Incorporation of functional groups that respond to external chemical or physical stimuli into the constituent organic molecules of supramolecular nanotubes allows us to drastically change the structure of the nanotubes by applying such stimuli. This ability affords an array of controllable approaches for the encapsulation, storage, and release of guest compounds, which is expected to be useful in the fields of physics, chemistry, biology, and medicine. In this article, I review the supramolecular nanotubes developed by our group that exhibit morphological transformations in response to pH, chemical reaction, light, temperature, or moisture.

Photo-responsive hole formation in the monolayer membrane wall of a supramolecular nanotube for quick recovery of encapsulated protein

Nanotubes with a single monolayer membrane wall comprised of a synthetic glycolipid and one of two synthetic azobenzene derivatives were assembled. X-ray diffraction, infrared, UV-visible, and circular dichroism spectroscopy clarified the embedding style of the azobenzene derivatives in the membrane wall, revealing that, depending on their different intermolecular hydrogen bond strengths, one azobenzene derivative was individually dispersed whereas the other formed a J-type aggregate. The non-aggregated derivative was insensitive to UV irradiation due to tight fixation by the surrounding glycolipid. In contrast, the aggregated derivative was sensitive to UV irradiation, which induced trans-to-cis isomerization of the derivative and disassembly of the J-type aggregate. Subsequent dissociation of the derivative into the bulk solution resulted in the formation of many nanometer-scale holes in the membrane wall. Although a model protein encapsulated within the nanotubes was slowly released over time from the two open ends of the nanotubes without UV irradiation, exposure to UV irradiation resulted in faster, preferential release of the protein through the holes in the membrane wall. The present findings are expected to facilitate the development not only of efficient means of recovering guest compounds stored within nanotubes but also the development of novel stimuli-responsive capsules in biological and medical fields.

Physiology and Physical Chemistry of Bile Acids

Bile acids (BAs) are facial amphiphiles synthesized in the body of all vertebrates. They undergo the enterohepatic circulation: they are produced in the liver, stored in the gallbladder, released in the intestine, taken into the bloodstream and lastly re-absorbed in the liver. During this pathway, BAs are modified in their molecular structure by the action of enzymes and bacteria. Such transformations allow them to acquire the chemical-physical properties needed for fulling several activities including metabolic regulation, antimicrobial functions and solubilization of lipids in digestion. The versatility of BAs in the physiological functions has inspired their use in many bio-applications, making them important tools for active molecule delivery, metabolic disease treatments and emulsification processes in food and drug industries. Moreover, moving over the borders of the biological field, BAs have been largely investigated as building blocks for the construction of supramolecular aggregates having peculiar structural, mechanical, chemical and optical properties. The review starts with a biological analysis of the BAs functions before progressively switching to a general overview of BAs in pharmacology and medicine applications. Lastly the focus moves to the BAs use in material science.

Stimuli-Sensitive Self-Assembled Tubules Based on Lysine-Derived Surfactants for Delivery of Antimicrobial Proteins

Drug delivery vectors based on amphiphiles have important features such as versatile physicochemical properties and stimuli-responsiveness. Amino acid-based surfactants are especially promising amphiphiles due to their enhanced biocompatibility compared to conventional surfactants. They can self-organize into micelles, vesicles and complex hierarchical structures, such as fibers, twisted and coiled ribbons, and tubules. In this work, we investigated the self-assembly and drug loading properties of a family of novel anionic double-tailed lysine-derived surfactants, with variable degree of tail length mismatch, designated as mLys10 and 10Lysn, where m and n are the number of carbon atoms in the tails. These surfactants form tubular aggregates with assorted morphologies in water that undergo gelation due to dense entanglement, as evidenced by light and electron microscopy. Lysozyme (LZM), an enzyme with antimicrobial properties, was selected as model protein for loading. After the characterization of the interfacial properties and phase behavior of the amphiphiles, the LZM-loading ability of the tubules was investigated, under varying experimental conditions, to assess the efficiency of the aggregates as pH- and temperature-sensitive nanocarriers. Further, the toxicological profile of the surfactants per se and surfactant/LZM hydrogels was obtained, using human skin fibroblasts (BJ-5ta cell line). Overall, the results show that the tubule-based hydrogels exhibit very interesting properties for the transport and controlled release of molecules of therapeutic interest.

Supracolloidal Atomium

Nature suggests that complex materials result from a hierarchical organization of matter at different length scales. At the nano- and micrometer scale, macromolecules and supramolecular aggregates spontaneously assemble into supracolloidal structures whose complexity is given by the coexistence of various colloidal entities and the specific interactions between them. Here, we demonstrate how such control can be implemented by engineering specially customized bile salt derivative-based supramolecular tubules that exhibit a highly specific interaction with polymeric microgel spheres at their extremities thanks to their scroll-like structure. This design allows for hierarchical supracolloidal self-assembly of microgels and supramolecular scrolls into a regular framework of "nodes" and "linkers". The supramolecular assembly into scrolls can be triggered by pH and temperature, thereby providing the whole supracolloidal system with interesting stimuli-responsive properties. A colloidal smart assembly is embodied with features of center-linker frameworks as those found in molecular metal-organic frameworks and in structures engineered at human scale, masterfully represented by the Atomium in Bruxelles.

C-12 vs C-3 substituted bile salts: An example of the effects of substituent position and orientation on the self-assembly of steroid surfactant isomers

Biomolecule derivatives are transversally used in nanotechnology. Deciphering their aggregation behavior is a crucial issue for the rational design of functional materials. To this end, it is necessary to build libraries of selectively functionalized analogues and infer general rules. In this work we enrich the highly applicative oriented collection of steroid derivatives, by reporting a rare example of C-12 selectively modified bile salt. While nature often exploits such position to encode functions, it is unusual and not trivial to prepare similar analogues in the laboratory. The introduction of a tert-butyl phenyl residue at C-12 provided a molecule with a self-assembly that remarkably switched from rigid pole-like structures to twisted ribbons at a biologically relevant critical temperature (∼25 °C). The system was characterized by microscopy and spectroscopy techniques and compared with the C-3 functionalized analogue. The twisted ribbons generate samples with a gel texture and a viscoelastic response. The parallel analysis of the two systems suggested that the observed thermoresponsive self-assemblies occur at similar critical temperatures and are probably dictated by the nature of the substituent, but involve aggregates with different structures depending on position and orientation of the substituent. This study highlights the self-assembly properties of two appealing thermoresponsive systems. Moreover, it adds fundamental insights hereto missing in the investigations of the relation between self-assembly and structure of synthetic steroids, which are valuable for the rational design of steroidal amphiphiles.

Bile Salts: Natural Surfactants and Precursors of a Broad Family of Complex Amphiphiles

Bile salts (BSs) are naturally occurring rigid surfactants with a steroidal skeleton and specific self-assembly and interface behaviors. Using bile salts as precursors, derivatives can be synthesized to obtain molecules with specific functionalities and amphiphilic structure. Modifications on single molecules are normally performed by substituting the least-hindered hydroxyl group on carbon C-3 of the steroidal A ring or at the end of the lateral chain. This leads to monosteroidal rigid building blocks that are often able to self-organize into 1D structures such as tubules, twisted ribbons, and fibrils with helical supramolecular packing. Tubular aggregates are of particular interest, and they are characterized by cross-section inner diameters spanning a wide range of values (3-500 nm). They can form through appealing pH- or temperature-responsive aggregation and in mixtures of bile salt derivatives to provide mixed tubules with tunable charge and size. Other derivatives can be prepared by covalently linking two or more bile salt molecules to provide complex systems such as oligomers, dendrimers, and polymeric materials. The unconventional amphiphilic molecular structure imparts specific features to BSs and derivatives that can be exploited in the formulation of capsules, drug carriers, dispersants, and templates for the synthesis of nanomaterials.

Bile acid derivative-based catanionic mixtures: versatile tools for superficial charge modulation of supramolecular lamellae and nanotubes

Self-assembled structures formed by mixtures of cationic and anionic surfactants are interesting tools for applications requiring interactions with charged particles and molecules. Nevertheless, they present instability close to the equimolar composition and poor morphological versatility, which is generally restricted to vesicles and micelles. Against this general trend, we report on bile salt derivative based catanionic mixtures assembling in tubules and lamellae depending on the mixture composition. Electrophoretic mobility measurements prove that the composition also dictates their superficial charge, which can be tuned from negative to positive by increasing the positively charged surfactant fraction in the mixtures. The study of the catanionic aggregates was conducted by means of microscopy and spectroscopy techniques and compared to the self-assembly behaviors of the individual building blocks. This study broadens the so far small array of bile salt derivative catanionic systems, confirming their distinctive behavior in the spectrum of catanionic mixtures.

Twisted nanoribbons from a RGD-bearing cholic acid derivative

In light of the biomedical interest for self-assembling amphiphiles bearing the tripeptide Arg-Gly-Gly (RGD), a cholic acid derivative was synthesized by introducing an aromatic moiety on the steroidal skeleton and the RGD sequence on the carboxylic function of its chain 17-24, thus forming a peptide amphiphile with the unconventional rigid amphiphilic structure of bile salts. In aqueous solution, the compound self-assembled into long twisted ribbons characterized by a very low degree of polydispersity in terms of width (≈25nm), thickness (≈4.5nm) and pitch (≈145nm). It was proposed that in the ribbon the molecules are arranged in a bilayer structure with the aromatic moieties in the interior, strongly involved in the intermolecular interaction, whereas the RGD residues are located at the bilayer-water interface. The nanostructure is significantly different from those generally provided by RGD-containing amphiphiles with the conventional peptide-tail structure, for which fibers with a circular cross-section were observed, and successfully tested as scaffolds for tissue regeneration. From previous work on the use of this kind of nanostructures, it is known that features like morphology, rigidity, epitope spacing and periodicity are important factors that dramatically affect cell adhesion and signaling. Within this context, the reported results demonstrate that bile salt-based peptide surfactants are promising building blocks in the preparation of non-trivial RGD-decorated nanoaggregates with well-defined morphologies and epitope distributions.

Optically Active Helical Polyacetylene Self-Assembled into Chiral Micelles Used As Nanoreactor for Helix-Sense-Selective Polymerization

Chiral micelles have been drawing ever-increasing attention because of their potentials in mimicking the unique stereochemical effects of enzymes. This article reports on the first success in preparing chiral micelles through self-assembly of helical polyacetylene bearing cholic acid pendants. The micelles were further used as chiral nanoreactor, in which achiral acetylenic monomer smoothly underwent helix-sense-selective polymerization (HSSP). The HSSPs directly established optically active core/shell nanoparticles whose shell and core both were constructed by helical polymers. The shells (or micelles) provided a protective effect for the preferably induced one-handed helical polymer chains in the cores. The present work provides insights into the self-assembly of chiral helical polymers, and also provides a powerful strategy for constructing novel chiral polymer nanoarchitectures.

On the stability of lithocholate derivative supramolecular tubules

Solubility and calorimetry data provide the description of a phase map for metastable supramolecular nanotubes of biological origin.

Hydrogen bonding asymmetric star-shape derivative of bile acid leads to supramolecular fibrillar aggregates that wrap into micrometer spheres

We report that star-shaped molecules with cholic acid cores asymmetrically grafted by low molecular weight polymers with hydrogen bonding end-groups undergo aggregation to nanofibers, which subsequently wrap into micrometer spherical aggregates with low density cores. Therein the facially amphiphilic cholic acid (CA) is functionalized by four flexible allyl glycidyl ether (AGE) side chains, which are terminated with hydrogen bonding 2-ureido-4[1H]pyrimidinone (UPy) end-groups as connected by hexyl spacers, denoted as CA(AGE6-C6H12-UPy)4. This wedge-shaped molecule is expected to allow the formation of a rich variety of solvent-dependent structures due to the complex interplay of interactions, enabled by its polar/nonpolar surface-active structure, the hydrophobicity of the CA in aqueous medium, and the possibility to control hydrogen bonding between UPy molecules by solvent selection. In DMSO, the surfactant-like CA(AGE6-C6H12-UPy)4 self-assembles into nanometer scale micelles, as expected due to its nonpolar CA apexes, solubilized AGE6-C6H12-UPy chains, and suppressed mutual hydrogen bonds between the UPys. Dialysis in water leads to nanofibers with lateral dimensions of 20-50 nm. This is explained by promoted aggregation as the hydrogen bonds between UPy molecules start to become activated, the reduced solvent dispersibility of the AGE-chains, and the hydrophobicity of CA. Finally, in pure water the nanofibers wrap into micrometer spheres having low density cores. In this case, strong complementary hydrogen bonds between UPy molecules of different molecules can form, thus promoting lateral interactions between the nanofibers, as allowed by the hydrophobic hexyl spacers. The wrapping is illustrated by transmission electron microscopy tomographic 3D reconstructions. More generally, we foresee hierarchically structured matter bridging the length scales from molecular to micrometer scale by sequentially triggering supramolecular interactions.

Dual-Responsive Lipid Nanotubes: Two-Way Morphology Control by pH and Redox Effects

Lipid nanotubes are the preferred structures for many applications, especially biological ones, and thus have attracted much interest recently. However, there is still a significant need for developing more lipid nanotubes that are reversibly controllable to improve their functionality and usability. Here, we presented a two-way reversible morphology control of the nanotubes formed by the recently designed molecule AQUA (C25H29NO4). Because of its special design, the AQUA has both pH-sensitive and redox-active characters provided by the carboxylic acid and anthraquinone groups. Upon chemical reduction, the nanotubes turned into thinner ribbons, and this structural transformation was significantly reversible. The reduction of the AQUA nanotubes also switched the nanotubes from electrically conductive to insulative. Nanotube morphology can additionally be altered by decreasing the pH below the pKa value of the AQUA, at ∼4.9. Decreasing the pH caused the gradual unfolding of the nanotubes, and the interlayer distance in the nanotube's walls increased. This morphological change was fast and reversible at a wide pH range, including the physiological pH. Thus, the molecular design of the AQUA allowed for an unprecedented two-way and reversible morphology control with both redox and pH effects. These unique features make AQUA a very promising candidate for many applications, ranging from electronics to controlled drug delivery.

Photoactive bile salts with critical micellar concentration in the micromolar range

The aggregation behavior of bile salts is strongly dependent on the number of hydroxyl groups.

Tailoring self-assembly behavior of a biological surfactant by imidazolium-based surfactants with different lengths of hydrophobic alkyl tails

Possible molecular packing model of microcrystal structures formed by NaDC and [C₂mim]Br.

On the self-assembly of a tryptophan labeled deoxycholic acid

Self-assembly of peptides and bile acids has been widely investigated because of their biological role and their potential as a tool for the preparation of nanostructured biomaterials. We herein report both the synthesis and the self-association behavior of a compound that combines the aggregation properties of bile acid- and amino acid-based molecules. The derivative has been prepared by introducing a L-tryptophan residue into the C-3 position of the deoxycholic acid skeleton and resulted in an amphoteric fluorescent labeled bile acid that shows a pH-dependent self-assembly. Under alkaline conditions it assembles into 28 nm diameter tubules, thus showing a completely different behavior compared to the precursor bile acid, which forms micelles under similar conditions. Upon heating the tubules break and turn into micelles, leading to an increase in the exposure to water of the tryptophan residue. On the other hand, in acidic solutions it aggregates into elongated micelles that further self-assemble forming a gel network, when an electrolyte is added.

Tailoring supramolecular nanotubes by bile salt based surfactant mixtures

An approach for tailoring self-assembled tubular structures is described. By controlling the relative composition of a two-component surfactant mixture comprising the natural bile salt lithocholate and its bolamphiphilic derivative, it was possible to finely tune the nanotube cross-section of the mixed tubular aggregates that self-associated spontaneously in aqueous solution at pH 12. The diameter was found to vary up to 50% when the stoichiometric ratio of the two bile salts was changed. The tuning of supramolecular nanochannels with such remarkable precision is of significant interest for technological applications of these materials.

Multi stimuli response of a single surfactant presenting a rich self-assembly behavior

A bile salt derived surfactant shows an unusually rich multi responsive self-assembly, involving interesting opening/closure mechanisms of supramolecular tubules and drastic spectroscopic variations, potentially exploitable in sensing.

pH-switchable self-assembled materials

Self-assembled materials, which are able to respond to external stimuli, have been extensively studied over the last decades. A particularly exciting stimulus for a wide range of biomedical applications is the pH value of aqueous solutions, since deprotonation-protonation events are crucial for structural and functional properties of biopolymers. In living cells and tissues, intra- and extracellular pH values are stringently regulated, but can deviate from pH neutral as observed for example in tumorous, inflammatory sites, in endocytic pathways, and specific cellular compartments. By using a pH-switch as a stimulus, it is thereby possible to address specific targets in order to cause a programmed response of the supramolecular material. This strategy has not only been successfully applied in fundamental research but also in clinical studies. In this feature article, current strategies that have been used in order to design materials with pH-responsive properties are illustrated. This discussion only addresses selected examples from the last four years, the self-assembly of polymer-based building blocks, assemblies emerging from small molecules including surfactants or derived from biological macromolecules, and finally the controlled self-assembly of oligopeptides.

Sugar-bile acid-based bolaamphiphiles: from scrolls to monodisperse single-walled tubules

The introduction of a mannose residue on carbon 3 of lithocholic acid gives rise to an asymmetric and rigid bolaamphiphilic molecule, which self-assembles in water to form elongated tubular aggregates with an outer diameter of about 20 nm. These tubular structures display a temporal evolution, where the average tube diameter decreases with time, which can be followed by time-resolved small-angle X-ray scattering experiments. Cryogenic transmission electron microscopy images collected as a function of time show that at short times after preparation tubular scrolls are formed via the rolling of layers, after which a complex transformation of the scrolls into single-walled tubules takes place. At long time scales, a further evolution occurs where the tubules both elongate and become narrower. The observed self-assembly confirms the tendency of bile acids and their derivatives to form supramolecular aggregates with an ordered packing of the constituent molecules. It also demonstrates that scrolls can be formed as intermediate structures in the self-assembly process of monodisperse single-walled tubules.

Characterization of carbon nanotube dispersions in solutions of bile salts and derivatives containing aromatic substituents

Bile salts (BS) are known to solubilize high weight fractions of carbon nanotubes (CNTs) in aqueous solutions. Here, the efficiency of derivatives of bile salts (BSDs) containing aromatic substituents in dispersing single-wall CNTs (SWCNTs) has been investigated in order to check whether the presence of aromatic residues, because of their affinity toward carbon nanotube surfaces, determines improvements of the BS dispersion efficiency (DE). Electric arc and CoMoCAT SWCNTs were analyzed. The results, reported for the two surfactant concentrations of 0.06 and 1.0 wt %, show that the DE of BSDs depends on the position, orientation, and structure of the introduced aromatic residues. In the case of the CoMoCAT SWCNTs, at low surfactant concentration a DE improvement is observed in BSDs where the aromatic residue is linked either to carbon 3, located on the rigid four-ring system, or to the side chain. For the latter, this improvement is also enhanced in double-charge derivatives and kept at high surfactant concentration. It was also observed that at low concentrations of surfactant, the DE values of BSs and BSDs are usually larger than those of the more conventional detergent sodium dodecylsulfate.

Between peptides and bile acids: self-assembly of phenylalanine substituted cholic acids

Biocompatible molecules that undergo self-assembly are of high importance in biological and medical applications of nanoscience. Peptides and bile acids are among the most investigated due to their ability to self-organize into many different, often stimuli-sensitive, supramolecular structures. With the aim of preparing molecules mixing the aggregation properties of bile acid and amino acid-based molecules, we report on the synthesis and self-association behavior of two diastereomers obtained by substituting a hydroxyl group of cholic acid with a l-phenylalanine residue. The obtained molecules are amphoteric, and we demonstrate that they show a pH-dependent self-assembly. Both molecules aggregate in globular micelles at high pH, whereas they form tubular superstructures under acid conditions. Unusual narrow nanotubes with outer and inner cross-section diameters of about 6 and 3 nm are formed by the derivatives. The diasteroisomer with α orientation of the substituent forms in addition a wider tubule (17 nm cross-section diameter). The ability to pack in supramolecular tubules is explained in terms of a wedge-shaped bola-form structure of the derivatives. Parallel or antiparallel face-to-face dimers are hypothesized as fundamental building blocks for the formation of the narrow and wide nanotubes, respectively.