Gold Nanorod-Incorporated Halloysite Nanotubes Functionalized with Antibody for Superior Antibacterial Photothermal Treatment

The global spread of antibiotic-resistant strains, and the need to protect the microflora from non-specific antibiotics require more effective and selective alternatives. In this work, we demonstrate for the first time a superior antibacterial photothermal effect of plasmonic gold nanorods (AuNRs) via their incorporation onto natural clay halloysite nanotubes (HNTs), which were functionalized with anti-E. coli antibodies (Ab-HNTs). AuNRs were incorporated onto the Ab-HNTs through a facile freeze-thaw cycle, and antibody integrity following the incorporation was confirmed via infrared spectroscopy and fluorescence immunolabeling. The incorporation efficiency was studied using UV-Vis absorption and transmission electron microscopy (TEM). Mixtures of E. coli and AuNR-Ab-HNTs hybrids or free AuNRs were irradiated with an 808 nm laser at 3-4 W cm^-2, and the resulting photothermal antibacterial activity was measured via plate count. The irradiated AuNR-Ab-HNTs hybrids exerted an 8-fold higher antibacterial effect compared to free AuNR under 3.5 W cm^-2; whereas the latter induced a 6 °C-higher temperature elevation. No significant antibacterial activity was observed for the AuNR-Ab-HNTs hybrid against non-target bacteria species (Serratia marcescens and Staphylococcus epidermidis). These findings are ascribed to the localization of the photothermal ablation due to the binding of the antibody-functionalized clay to its target bacteria, as supported through TEM imaging. In the future, the HNTs-based selective carriers presented herein could be tailored with other antibacterial nanoparticles or against another microorganism via the facile adjustment of the immobilized antibody.

Prokaryotic and eukaryotic toxicity of halloysite decorated with photoactive nanoparticles

The development of new approaches to treat the growing antibiotic resistance of pathogenic bacterial species is an important task to ensure the future safety of society. Utilization of irradiation of different wavelengths together with nanostructured materials based on metal containing nanoparticles may result in synergetic antibacterial effects. In this paper we aim to show the main conceptions of light-assisted bacteria deactivation techniques and prospects of application of natural clay nanotubes as a carrier for scalable photoactive antibacterial nanomaterials. Halloysite aluminosilicate nanotubes (ca 50 nm diameter, ca. 1.0 μm length) are safe and biocompatible natural materials produced in tons. Their application as a template or a carrier for metal nanoparticles, QDs and organic compounds has already found application in biomedical research, cosmetics, polymers, coatings, catalysis and related applications. Here, we show the toxicity of halloysite decorated with photoactive nanoparticles on prokaryotic and eukaryotic cells. The formation of light active nanostructured materials with this clay as the base is a promising tool for solving the problem of the antibiotic resistance of microorganisms.

Halloysite Nanotubes: Smart Nanomaterials in Catalysis

The use of clay minerals as catalyst is renowned since ancient times. Among the different clays used for catalytic purposes, halloysite nanotubes (HNTs) represent valuable resources for industrial applications. This special tubular clay possesses high stability and biocompatibility, resistance against organic solvents, and most importantly be available in large amounts at a low cost. Therefore, HNTs can be efficiently used as catalysts themselves or supports for metal nanoparticles in several catalytic processes. This review reports a comprehensive overview of the relevant advances in the use of halloysite in catalysis, focusing the attention on the last five years.

Promotion effects of halloysite nanotubes on catalytic activity of Co3O4 nanoparticles toward reduction of 4-nitrophenol and organic dyes

Nanosized clay minerals have been widely used as efficient supports to immobilize catalyst nanoparticles. However, clay support-induced interactions and their influences on the catalyst structure and performance currently have not been fully understood. Here, Co₃O₄ nanoparticles supported on halloysite nanotubes (HNTs) were synthesized by a facile deposition-precipitation approach followed by thermal treatment. A series of characterization methods were employed for the Co₃O₄/HNTs hybrid nanostructure to identify its crystal phase, chemical composition, morphology, specific surface area, surface chemical states, and redox property. Characterization results showed that HNTs not only impacted the particle size of Co₃O₄ nanoparticles, but also modified surface chemical surface states of the later, which ultimately promoted the effective catalytic reduction of 4-nitrophenol (4-NP) and azo dyes with sodium borohydride. The interaction between HNTs and Co₃O₄ nanoparticles was found to shorten the induction period of the 4-NP reduction. Meanwhile, the Co₃O₄/HNTs catalyst for the 4-NP reduction achieved an apparent rate constant of 0.265 min^-1 and an activity parameter of 1.63 × 10⁴ min^-1 g^-1 as well as a turnover frequency of 4.37 min^-1. In addition, Co₃O₄/HNTs showed an improvement in reduction efficiency of the azo dyes when compared to bare Co₃O₄ nanoparticles.

Gold-Based Nanoparticles on Amino-Functionalized Mesoporous Silica Supports as Nanozymes for Glucose Oxidation

The transformation of glucose represents a topic of great interest at different levels. In the first place, glucose is currently conceived as a green feedstock for the sustainable production of chemicals. Secondly, the depletion of glucose at the cellular level is currently envisioned as a promising strategy to treat and alter the erratic metabolism of tumoral cells. The use of natural enzymes offers multiple advantages in terms of specificity towards the glucose substrate but may lack sufficient robustness and recyclability beyond the optimal operating conditions of these natural systems. In the present work, we have evaluated the potential use of an inorganic based nanohybrid containing gold nanoparticles supported onto ordered mesoporous supports. We have performed different assays that corroborate the enzyme-mimicking response of these inorganic surrogates towards the selective conversion of glucose into gluconic acid and hydrogen peroxide. Moreover, we conclude that these enzyme-like mimicking surrogates can operate at different pH ranges and under mild reaction conditions, can be recycled multiple times and maintain excellent catalytic response in comparison with other gold-based catalysts.

Silver-Copper Oxide Heteronanostructures for the Plasmonic-Enhanced Photocatalytic Oxidation of N-Hexane in the Visible-NIR Range

Volatile organic compounds (VOCs) are recognized as hazardous contributors to air pollution, precursors of multiple secondary byproducts, troposphere aerosols, and recognized contributors to respiratory and cancer-related issues in highly populated areas. Moreover, VOCs present in indoor environments represent a challenging issue that need to be addressed due to its increasing presence in nowadays society. Catalytic oxidation by noble metals represents the most effective but costly solution. The use of photocatalytic oxidation has become one of the most explored alternatives given the green and sustainable advantages of using solar light or low-consumption light emitting devices. Herein, we have tried to address the shortcomings of the most studied photocatalytic systems based on titania (TiO₂) with limited response in the UV-range or alternatively the high recombination rates detected in other transition metal-based oxide systems. We have developed a silver-copper oxide heteronanostructure able to combine the plasmonic-enhanced properties of Ag nanostructures with the visible-light driven photoresponse of CuO nanoarchitectures. The entangled Ag-CuO heteronanostructure exhibits a broad absorption towards the visible-near infrared (NIR) range and achieves total photo-oxidation of n-hexane under irradiation with different light-emitting diodes (LEDs) specific wavelengths at temperatures below 180 °C and outperforming its thermal catalytic response or its silver-free CuO illuminated counterpart.

Simulation studies for gamma ray shielding properties of Halloysite nanotubes using MCNP-5 code

Halloysite clay is a mineral found in natural and it has many applications in chemistry (for catalytic and extraction) and also in the medical field (for drugs delivery), so it is important to study the shielding properties of natural and modified nanotube Halloysite. The mass attenuation coefficient was simulated for natural Halloysite clay mineral and four others modified halloysite nanotubes using MCNP 5 code for incident gamma ray energies between 0.015 and 15 MeV. The mass attenuation coefficient was also calculated using the XCOM database for studied samples in the same energy range. The results obtained by the MCNP simulation were close to those obtained by XCOM calculation. Moreover, other shielding properties that described the interaction of incident gamma rays with Halloysite composites, such as the HVL, MFP, Z_eff, and N_eff were calculated using the simulated μ_m for gamma rays between 0.015 and 15 MeV.

Interfacial Self-Assembly in Halloysite Nanotube Composites

A self-assembly of clay nanotubes in functional arrays for the production of organized organic/inorganic heterostructures is described. These 50-nm-diameter natural alumosilicate nanotubes are biocompatible. Halloysite allows for 10-20 wt % chemical/drug loading into the inner lumen, and it gives an extended release for days and months (anticorrosion, self-healing, flame-retardant, antifouling, and antibacterial composites). The structured surfaces of the oriented nanotube micropatterns enhance interactions with biological cells, improving their capture and inducing differentiation in stem cells. An encapsulation of the cells with halloysite enables control of their growth and proliferation. This approach was also developed for spill petroleum bioremediation as a synergistic process with Pickering oil emulsification. We produced 2-5-nm-diameter particles (Au, Ag, Pt, Co, Ru, Cu-Ni, Fe₃O₄, ZrO₂, and CdS) selectively inside or outside the aluminosilicate clay nanotubes. The catalytic hydrogenation of benzene and phenol, hydrogen production, impacts of the metal core-shell architecture, the metal particle size, and the seeding density were optimized for high-efficiency processes, exceeding the competitive industrial formulations. These core-shell mesocatalysts are based on a safe and cheap natural clay nanomaterial and may be scaled up for industrial applications.

Antimicrobial Applications of Clay Nanotube-Based Composites

Halloysite nanotubes with different outer surface/inner lumen chemistry (SiO₂/Al₂O₃) are natural objects with a 50 nm diameter hollow cylindrical structure, which are able to carry functional compounds both inside and outside. They are promising for biological applications where their drug loading capacity combined with a low toxicity ensures the safe interaction of these nanomaterials with living cells. In this paper, the antimicrobial properties of the clay nanotube-based composites are reviewed, including applications in microbe-resistant biocidal textile, paints, filters, and medical formulations (wound dressings, drug delivery systems, antiseptic sprays, and tissue engineering scaffolds). Though halloysite-based antimicrobial materials have been widely investigated, their application in medicine needs clinical studies. This review suggests the scalable antimicrobial nano/micro composites based on natural tubule clays and outlines research and development perspectives in the field.

Rod in Tube: A Novel Nanoplatform for Highly Effective Chemo-Photothermal Combination Therapy toward Breast Cancer

Gold nanorods (GNRs) and doxorubicin (DOX) were loaded into the lumen of halloysite nanotubes (HNTs) via a rapid synthesis process (2 min) and physical adsorption. The targeting molecules of folic acid (FA) are then conjugated to HNTs via reactions with bovine serum albumin (BSA). The formation of GNRs in HNTs was verified by different techniques. Au-HNT-DOX@BSA-FA shows a maximum temperature of 26.8 °C rising after 8 min of 808 nm laser irradiation under 0.8 W cm^-2. The functionalized HNTs exhibited stronger chemotherapeutic effect under laser irradiation as the laser could promote the release of DOX and temperature rising. Au-HNT-DOX@BSA-FA-treated MCF-7 cells exhibited a survival rate of 7.4% after laser irradiation. Au-HNT-DOX@BSA-FA treatment does not induce obvious toxicity in blood biochemistry, liver, and kidney function in normal mice. In vivo chemo-photothermal treatment toward 4T1-bearing mice suggested that Au-HNT-DOX@BSA-FA exhibited remarkable tumor-targeted efficiency and good controlled release effect for DOX. Also, the nanoparticles exhibited a rapid photothermal performance and an ability to inhibit the growth of tumors. Because of the synergistic effect of chemical-photothermal therapy, the toxicity of DOX to normal tissues was reduced on the premise of ensuring the same curative effect with a low dosage of 0.32 mg kg^-1. This novel chemo-photothermal therapy nanoplatform provided a safe, rapid, effective, and cheap choice for the treatment of breast tumors both in vitro and in vivo.

In-Situ Deposition of Plasmonic Gold Nanotriangles and Nanoprisms onto Layered Hydroxides for Full-Range Photocatalytic Response towards the Selective Reduction of p-Nitrophenol

In this work, we present photocatalysis as a greener alternative to conventional catalysis where harsh reaction conditions, temperature and/or pressure are needed. Photodegradation of organic pollutants is a cost-effective, eco-friendly solution for the decontamination of water and air, and is a field that has been continuously growing over the last decade. Plasmonic metal nanoparticles absorb light irradiation that is transferred to the chemical reaction in a different fashion. Furthermore, plasmonic nanostructures can be combined with other materials, such as semiconductors or a basic support, to create hybrid systems capable of overcoming certain challenges that photocatalysis is facing nowadays and to expand the photocatalytic response towards the whole visible-near infrared (Vis-NIR) ranges. The main objective of this work has been to in-situ synthesize plasmonic anisotropic gold nanoparticles onto hydrotalcite (HT) and calcined hydrotalcite (CHT) supports by way of a sequential deposition-reduction (DR) process and to evaluate their efficiency as heterogeneous catalysts towards the selective oxidation of p-nitrophenol (hereafter 4-NP), a well-known model contaminant, either in the absence or the presence of full-range light irradiation sources (LEDs) spanning the whole UV-Vis-NIR range. Special attention has been paid to the optimization of the catalyst preparation parameters, including the pH and the concentration of reducing and stabilizing agents. Interestingly, the use of thermally modified hydrotalcites has enabled a strong metal-support interaction to induce the preferential formation of triangular-shaped Au nanoparticles with ca. 0.8 wt.% loading while increasing the colloidal stability and surface area of the catalyst with respect to the commercial untreated HT supports.

Steady shear and dynamic strain thickening of halloysite nanotubes and fumed silica shear thickening composite

Developing the shear thickening fluids (STF) which can be used for soft body armours requires an in depth study of various parameters related to its constituents so that a high critical viscosity along with high critical shear rate can be obtained. Shape of the constituting particles is one such important parameter. Elongated and nanosize particles provide high critical viscosity to the fluid, whereas spherical particles show high critical shear rates. STF were prepared using halloysite (Hal) nanotubes of different concentrations with fumed silica (spheres) and their rheological properties were studied. A better non-flocculated structure was obtained at 1% Hal in 20% fumed silica composition, exhibiting a critical viscosity of 25 Pas at a critical shear rate 160 s−1 as compared to that of only spherical particle STF (10 Pas and 200 s−1). The oscillatory tests revealed that this composition, with a better consistent reproducible behaviour and better stability than the STF without Hal, would be suitable as a high impact resistant material. Gel formation does not take place, rather the fluid behaves like a dispersed sol, making it a better choice for using with protective fabrics. The rheology was studied at different temperatures ranging from 0°C to 55°C.

Fluorescence and Cytotoxicity of Cadmium Sulfide Quantum Dots Stabilized on Clay Nanotubes

Quantum dots (QD) are widely used for cellular labeling due to enhanced brightness, resistance to photobleaching, and multicolor light emissions. CdS and CdxZn₁-xS nanoparticles with sizes of 6⁻8 nm were synthesized via a ligand assisted technique inside and outside of 50 nm diameter halloysite clay nanotubes (QD were immobilized on the tube's surface). The halloysite⁻QD composites were tested by labeling human skin fibroblasts and prostate cancer cells. In human cell cultures, halloysite⁻QD systems were internalized by living cells, and demonstrated intense and stable fluorescence combined with pronounced nanotube light scattering. The best signal stability was observed for QD that were synthesized externally on the amino-grafted halloysite. The best cell viability was observed for CdxZn₁-xS QD immobilized onto the azine-grafted halloysite. The possibility to use QD clay nanotube core-shell nanoarchitectures for the intracellular labeling was demonstrated. A pronounced scattering and fluorescence by halloysite⁻QD systems allows for their promising usage as markers for biomedical applications.

Halloysite Nanotube-Modified Plasmonic Interface for Highly Sensitive Refractive Index Sensing

We propose and demonstrate a novel strategy to modify the plasmonic interface by using a thin layer of halloysite nanotubes (HNTs). The modified surface plasmon resonance (SPR) sensor achieves a greatly improved sensitivity because the large surface area and high refractive index of the HNTs layer significantly increase the probing electric field intensity and hence the measurement sensitivity. More significantly, the thickness of the HNTs layer can be tailored by spraying different concentrations of HNTs ethanol suspension. The proposed sensors show significant superiority in terms of the highest sensitivity (10431 nm/RIU) and the enhancement fold (5.6-folds) over those reported previously. Additionally, the proposed approach is a chemical-free and environment-friendly modification method for the sensor interface, without additional chemical or biological amplification steps (no toxic solvents are used). These unique features make the proposed HNTs-SPR biosensor a simple, biocompatible, and low-cost platform for the trace-level detection of biochemical species in a rapid, sensitive, and nondestructive manner.

Core-shell nanoarchitecture: Schiff-base assisted synthesis of ruthenium in clay nanotubes

Natural halloysite clay nanotubes were used as a template for clay/Ru core-shell nanostructure synthesis. Ru-nanoparticles were produced via a ligand-assisted metal ion intercalation technique. Schiff bases formed from different organic compounds proved to be effective ligands for the metal interfacial complexation which then was converted to Ru particles. This produces a high amount of intercalated metal nanoparticles in the tube’s interior with more that 90% of the sample loaded with noble metal. Depending on the selection of organic linkers, we filled the tube’s lumen with 2 or 3.5-nm diameter Ru particles, or even larger metal clusters. Produced nanocomposites are very efficient in reactions of hydrogenation of aromatic compounds, as tested for phenol and cresols hydrogenation.

Halloysite Nanotubes for Cleaning, Consolidation and Protection

Herein, we report our recent research concerning the development of halloysite based protocols for cleaning, consolidation and protection purposes. Surface modification of halloysite cavity by anionic surfactants was explored to fabricate inorganic micelles able to solubilize hydrophobic contaminants. Hybrid dispersions based on halloysite and ecocompatible polymers were tested as consolidants for paper and waterlogged archaeological woods. Encapsulation of deacidifying and flame retardant agents within the halloysite lumen was conducted with aim to obtain nanofiller with a long-term protection ability. The results prove the suitability and versatility of halloysite nanotubes, which are perspective inorganic nanoparticles within materials science, remedation and conservation of cultural heritage fields.

Au–Ag and Pt–Ag bimetallic nanoparticles@halloysite nanotubes: morphological modulation, improvement of thermal stability and catalytic performance

Bimetallic Au–Ag@HNT and Pt–Ag@HNT nanocages showed significantly improved efficiency in the oxidation of o-phenylenediamine as peroxidase-like catalyst compared with corresponding monometallic nanoparticles.

Design of PNIPAAM covalently grafted on halloysite nanotubes as a support for metal-based catalysts

A thermo-responsive polymer (PNIPAAM) was covalently grafted on the external surface of halloysite nanotubes and used as support for palladium nanoparticles for application as catalyst in Suzuki cross coupling in water under microwave irradiation.

Bio-inspired magnetic molecularly imprinted polymers based on Pickering emulsions for selective protein recognition

Hydrophobic halloysite nanotube stabilized Pickering emulsions and their application in protein separation.

Multilayered core-satellite nanoassemblies with fine-tunable broadband plasmon resonances

We report on a robust nanotemplating approach to synthesize plasmonic multilayered core-satellite (MCS) nanoassemblies. Templated with gold nanorods, ultrathin Au/Ag alloy cages and satellite gold nanoparticles can be constructed sequentially by galvanic replacement reactions and electrostatic self-assembly, respectively, forming structurally well-defined MCS. The MCS nanoassemblies exhibit strong broadband plasmon resonances from ∼440 to ∼1100 nm, and their resonant features can be fine-tuned by adjusting the size and number density of satellite nanoparticles and by adjusting the thickness of the silica spacer between cage and satellite particles. Such fine-engineered MCS nanoassemblies enable precise programming of the strength and distribution of "hot spots" to maximize the overall enhancement of surface enhanced Raman scattering.