Gellan gum-dopamine mediated in situ synthesis of silver nanoparticles and development of nano/micro-composite injectable hydrogel with antimicrobial activity

Infected skin wounds represent a serious health threat due to the long healing process and the risk of colonization by multi-drug-resistant bacteria. Silver nanoparticles (AgNPs) have shown broad-spectrum antimicrobial activity. This study introduces a novel approach to address the challenge of infected skin wounds by employing gellan gum-dopamine (GG-DA) as a dual-functional agent, serving both as a reducing and capping agent, for the in situ green synthesis of silver nanoparticles. Unlike previous methods, this work utilizes a spray-drying technique to convert the dispersion of GG-DA and AgNPs into microparticles, resulting in nano-into-micro systems (AgNPs@MPs). The microparticles, with an average size of approximately 3 μm, embed AgNPs with a 13 nm average diameter. Furthermore, the study explores the antibacterial efficacy of these AgNPs@MPs directly and in combination with other materials against gram-positive and gram-negative bacteria. The versatility of the antimicrobial material is showcased by incorporating the microparticles into injectable hydrogels. These hydrogels, based on oxidized Xanthan Gum (XGox) and a hyperbranched synthetic polymer (HB10K-G5-alanine), are designed with injectability and self-healing properties through Shiff base formation. The resulting nano-into-micro-into-macro hybrid hydrogel emerges as a promising biomedical solution, highlighting the multifaceted potential of this innovative approach in wound care and infection management.

Surface Coatings via the Assembly of Metal-Monophenolic Networks

Mussel-inspired surface modification has received significant interest in recent years because of its simplicity and versatility. The deposition systems are still mainly limited to molecules with catechol chemical structures. In this paper, we report a novel deposition system based on a monophenol, vanillic acid (4-hydroxy-3-methoxybenzoic acid), to fabricate metal-phenolic network coatings on various substrates. The results of the water contact angle and zeta potential reveal that the modified polypropylene microfiltration membrane is underwater superhydrophobic and positively charged, showing applications in oil/water separation and dye removal. Furthermore, the single-face modified Janus membrane is promising in switchable oil/water separation. The results demonstrate a novel example of the metal-monophenolic deposition system, which expands the toolbox of surface coatings and facilitates the understanding of the deposition of phenols.

Insight into the photocatalytic mineralization of short chain chlorinated paraffins boosted by polydopamine and Ag nanoparticles

Short chain chlorinated paraffins (SCCPs) have attracted increasing attention recently due to their widespread occurrence and persistence in the environment, long-distance transport, and bioaccumulation and toxicity. For the sake of photocatalytic elimination of SCCPs, a kind of polydopamine (PDA) based photocatalyst, echinus-like Fe₂O₃@PDA-Ag hybrids have been synthesized via coating Fe₂O₃ with PDA by self-polymerization of dopamine and further loading silver nanoparticles by in situ reduction onto the surface of PDA shell. The photogenerated charges of Fe₂O₃@PDA-Ag hybrids exhibit long lifetime from transient photovoltage signal, which is of benefit to participate in various subsequent reaction processes before their recombination. Benefiting from the coating of PDA shell and the deposition of Ag nanoparticles, Fe₂O₃@PDA-Ag hybrids exhibit enhanced photocatalytic activity for the removel of SCCPs as investigated by the in situ Fourier transform infrared spectroscopy, 2.9 times as high as that of Fe₂O₃, due to the reactive OH radicals. The density functional theory simulation demonstrates the key mechanism of the formation of conjugate bond in the dechlorination process as well as the final product of HCl. The simulation indicates that there are no regularities for the H-abstraction but the dechlorination usually occurs in the adjacent Cl atoms next to the C with H-abstraction.

Polydopamine-Based 3D Colloidal Photonic Materials: Structural Color Balls and Fibers from Melanin-Like Particles with Polydopamine Shell Layers

Nature creates beautiful structural colors, and some of these colors are produced by nanostructural arrays of melanin. Polydopamine (PDA), an artificial black polymer produced by self-oxidative polymerization of dopamine, has attracted extensive attention because of its unique properties. PDA is a melanin-like material, and recent studies have reported that photonic materials based on PDA particles showed structural colors by enhancing color saturation through the absorption of scattered light. Herein, we describe the preparation of three-dimensional (3D) colloidal photonic materials, such as structural color balls and fibers, from biomimetic core-shell particles with melanin-like PDA shell layers. Structural color balls were prepared through the combined use of membrane emulsion and heating. We also demonstrated the use of microfluidic emulsification and solvent diffusion for the fabrication of structural color fibers. The obtained 3D colloidal materials, i.e., balls and fibers, exhibited angle-independent structural colors due to the amorphous assembly of PDA-containing particles. These findings provide new insight for the development of dye-free technology for the coloration of various 3D colloidal architectures.

Remarkably enhanced adhesion of coherently aligned catechol-terminated molecules on ultraclean ultraflat gold nanoplates

We report the characterization and formation of catechol-terminated molecules immobilized on gold nanoplates (Au NPLs) using N-(3,4-dihydroxyphenethyl)-2-mercaptoacetamide (Cat-EAA-SH). Single-crystalline Au NPLs, synthesized using a one-step chemical vapor transport method, have ultraclean and ultraflat surfaces that make Cat-EAA-SH molecules aligned into a well-ordered network of a large-scale. Topographic study of the catechol-terminated molecules on Au NPLs using atomic force microscopy showed more orderly orientation and higher density, leading to significantly higher adhesion as observed from local force-distance curves than those on other Au surfaces. These coherently aligned catechol-terminated molecules on the atomically smooth gold surface led to significanty more reproducible and thus more physico-chemically meaningful measurements than was possible before by employing rough gold surfaces.

Reactions in ultra-small droplets by tip-assisted chemistry

The confinement of chemical reactions within small droplets has received much attention in the last few years. This approach has been proved successful for the in-depth study of naturally occurring chemical processes as well as for the synthesis of different sets of nanomaterials with control over their size, shape and properties. Different approaches such as the use of self-contained structures or microfluidic generated droplets have been followed over the years with success. However, novel approaches have emerged during the last years based on the deposition of femtolitre-sized droplets on surfaces using tip-assisted lithographic methods. In this feature article, we review the advances made towards the use of these ultra-small droplets patterned on surfaces as confined nano-reactors.

Ultrasmooth Polydopamine Modified Surfaces for Block Copolymer Nanopatterning on Flexible Substrates

Nature has engineered universal, catechol-containing adhesives which can be synthetically mimicked in the form of polydopamine (PDA). In this study, PDA was exploited to enable the formation of block copolymer (BCP) nanopatterns on a variety of soft material surfaces. While conventional PDA coating times (1 h) produce a layer too rough for most applications of BCP nanopatterning, we found that these substrates could be polished by bath sonication in a weakly basic solution to form a conformal, smooth (root-mean-square roughness ∼0.4 nm), and thin (3 nm) layer free of large prominent granules. This chemically functionalized, biomimetic layer served as a reactive platform for subsequently grafting a surface neutral layer of poly(styrene-random-methyl methacrylate-random-glycidyl methacrylate) to perpendicularly orient lamellae-forming poly(styrene-block-methyl methacrylate) BCP. Moreover, scanning electron microscopy observations confirmed that a BCP nanopattern on a poly(ethylene terephthalate) substrate was not affected by bending with a radius of ∼0.5 cm. This procedure enables nondestructive, plasma-free surface modification of chemically inert, low-surface energy soft materials, thus overcoming many current chemical and physical limitations that may impede high-throughput, roll-to-roll nanomanufacturing.

Synthesis of Nanoscale Coordination Polymers in Femtoliter Reactors on Surfaces

In the present work, AFM-assisted lithography was used to perform the synthesis of a coordination polymer inside femtoliter droplets deposited on surfaces. For this, solutions of the metal salt and the organic ligand were independently transferred to adjacent tips of the same AFM probe array and were sequentially delivered on the same position of the surface, creating femtoliter-sized reaction vessels where the coordination reaction and particle growth occurred. Alternatively, the two reagents were mixed in the cantilever array by loading an excess of the inks, and transferred to the surface immediately after, before the precipitation of the coordination polymer took place. The in situ synthesis allowed the reproducible obtaining of round-shaped coordination polymer nanostructures with control over their XY positioning on the surface, as characterized by microscopy and spectroscopy techniques.

In Situ Synthesis of Antimicrobial Silver Nanoparticles within Antifouling Zwitterionic Hydrogels by Catecholic Redox Chemistry for Wound Healing Application

A multifunctional hydrogel that combines the dual functionality of both antifouling and antimicrobial capacities holds great potential for many bioapplications. Many approaches and different materials have been employed to synthesize such a material. However, a systematic study, including in vitro and in vivo evaluation, on such a material as wound dressings is highly scarce at present. Herein, we report on a new strategy that uses catecholic chemistry to synthesize antimicrobial silver nanoparticles impregnated into antifouling zwitterionic hydrogels. For this purpose, hydrophobic dopamine methacrylamide monomer (DMA) was mixed in an aqueous solution of sodium tetraborate decahydrate and DMA monomer became soluble after increasing pH to 9 due to the complexation between catechol groups and boron. Then, cross-linking polymerization of zwitterionic monomer was carried out with the solution of the protected dopamine monomer to produce a new hydrogel. When this new hydrogel comes in contact with a silver nitrate solution, silver nanoparticles (AgNPs) are formed in its structure as a result of the redox property of the catechol groups and in the absence of any other external reducing agent. The results obtained from TEM and XRD measurements indicate that AgNPs with diameters of around 20 nm had formed within the networks. FESEM images confirmed that the silver nanoparticles were homogeneously incorporated throughout the hydrogel network, and FTIR spectroscopy demonstrated that the catechol moiety in the polymeric backbone of the hydrogel is responsible for the reduction of silver ions into the AgNPs. Finally, the in vitro and in vivo experiments suggest that these mussel-inspired, antifouling, antibacterial hydrogels have great potential for use in wound healing applications.

Nanoscale coordination polymers obtained in ultrasmall liquid droplets on solid surfaces and its comparison to different synthetic volume scales

Confined synthesis and comparative study of a coordination polymer at different volume scales, from the macroscopic to the femtolitre scale.