Keys to Unravel the Stability/Durability Issues of Platinum-Group-Metal Catalysts toward Oxygen Evolution Reaction for Acidic Water Splitting

Proton exchange membrane (PEM) water electrolyzers stand as one of the foremost promising avenues for acidic water splitting and green hydrogen production, yet this electrolyzer encounters significant challenges. The primary culprit lies in not only the requirements of substantial platinum-group-metal (PGM)-based electrocatalysts (e.g., IrO x ) at the anode where sluggish oxygen evolution reaction (OER) takes place, but also the harsh high overpotential and acidic environments leading to severe performance degradation. The key points for obtaining accurate stability/durability information on the OER catalysts have not been well agreed upon, in contrast to the oxygen reduction reaction fields. In this regard, we herein reviewed and discussed the pivotal experimental variables involved in stability/durability testing (including but not limited to electrolyte, impurity, catalyst loading, and two/three-electrode vs membrane-electrode-assembly), while the test protocols are revisited and summarized. This outlook is aimed at highlighting the reasonable and effective accelerated degradation test procedures to unravel the acidic OER catalyst instability issues and promote the research and development of a PEM water electrolyzer.

The Electrocatalytic Activity of Au Electrodes Changes Significantly in Various Na+/K+ Supporting Electrolyte Mixtures

The potential of maximum entropy (PME) is an indicator of extreme disorder at the electrode/electrolyte interface and can predict changes in catalytic activity within electrolytes of varying compositions. The laser-induced current transient technique is employed to evaluate the PME for Au polycrystalline (Aupc) electrodes immersed in Ar-saturated cation electrolyte mixtures containing potassium and sodium ions at pH = 8. Five cation ratios (0.5 M K2SO4:0.5 M Na2SO4 = 0:1, 0.25:0.75, 0.5:0.5, 0.75:0.25, and 1:0) are explored, considering earlier studies that unveil cation-dependent shifts at near-neutral pH. Moreover, for all electrolyte compositions, electrochemical impedance spectroscopy is utilized to determine the double-layer capacitance (C DL), the minimum of which should be close to the potential of zero charge (PZC). By correlating cation molar ratios with the PMEs and PZCs, the impact on the model oxygen reduction reaction (ORR) activity, assessed via the rotating disk electrode method, is analyzed. The results demonstrate a linear relationship between electrolyte cation mixtures and PME, while ORR activity exhibits an exponential trend. This observation validates the PME-activity link hypothesis, underscoring electrolyte components' pivotal role in tailoring interfacial properties for electrocatalytic systems. These findings introduce a new degree of freedom for designing optimal electrocatalytic systems by adjusting various electrolyte components.

Long-Range SECCM Enables High-Throughput Electrochemical Screening of High Entropy Alloy Electrocatalysts at Up-To-Industrial Current Densities

High-entropy alloys (HEAs), especially in the form of compositional complex solid solutions (CCSS), have gained attention in the field of electrocatalysis. However, exploring their vast composition space concerning their electrocatalytic properties imposes significant challenges. Scanning electrochemical cell microscopy (SECCM) offers high-speed electrochemical analysis on surface areas with a lateral resolution down to tens of nm. However, high-precision piezo positioners often used for the motion of the tip limit the area of SECCM scans to the motion range of the piezo positioners which is typically a few tens of microns. To bridge this experimental gap, the study proposes a long-range SECCM system with a rapid gas-exchange environmental cell for high-throughput electrochemical characterization of 100 mm diameter HEA thin-film material libraries (ML) obtained by combinatorial co-sputtering. Due to the gas-liquid interface at the positioned SECCM droplet on the sample, high-throughput evaluation under industrial current density conditions becomes feasible. This allows the direct correlation between electrocatalytic activity and material composition with high statistical reliability. The multidimensional data obtained accelerates materials discovery, development, and optimization.

Unveiling Nanoscale Heterogeneities at the Bias-Dependent Gold-Electrolyte Interface

Electrified solid-liquid interfaces (SLIs) are extremely complex and dynamic, affecting both the dynamics and selectivity of reaction pathways at electrochemical interfaces. Enabling access to the structure and arrangement of interfacial water in situ with nanoscale resolution is essential to develop efficient electrocatalysts. Here, we probe the SLI energy of a polycrystalline Au(111) electrode in a neutral aqueous electrolyte through in situ electrochemical atomic force microscopy. We acquire potential-dependent maps of the local interfacial adhesion forces, which we associate with the formation energy of the electric double layer. We observe nanoscale inhomogeneities of interfacial adhesion force across the entire map area, indicating local differences in the ordering of the solvent/ions at the interface. Anion adsorption has a clear influence on the observed interfacial adhesion forces. Strikingly, the adhesion forces exhibit potential-dependent hysteresis, which depends on the local gold grain curvature. Our findings on a model electrode extend the use of scanning probe microscopy to gain insights into the local molecular arrangement of the SLI in situ, which can be extended to other electrocatalysts.

Role of Electrolyte pH on Water Oxidation for Iridium Oxides

Understanding the effect of noncovalent interactions of intermediates at the polarized catalyst-electrolyte interface on water oxidation kinetics is key for designing more active and stable electrocatalysts. Here, we combine operando optical spectroscopy, X-ray absorption spectroscopy (XAS), and surface-enhanced infrared absorption spectroscopy (SEIRAS) to probe the effect of noncovalent interactions on the oxygen evolution reaction (OER) activity of IrOx in acidic and alkaline electrolytes. Our results suggest that the active species for the OER (Ir4.x+-*O) binds much stronger in alkaline compared with acid at low coverage, while the repulsive interactions between these species are higher in alkaline electrolytes. These differences are attributed to the larger fraction of water within the cation hydration shell at the interface in alkaline electrolytes compared to acidic electrolytes, which can stabilize oxygenated intermediates and facilitate long-range interactions between them. Quantitative analysis of the state energetics shows that although the *O intermediates bind more strongly than optimal in alkaline electrolytes, the larger repulsive interaction between them results in a significant weakening of *O binding with increasing coverage, leading to similar energetics of active states in acid and alkaline at OER-relevant potentials. By directly probing the electrochemical interface with complementary spectroscopic techniques, our work goes beyond conventional computational descriptors of the OER activity to explain the experimentally observed OER kinetics of IrOx in acidic and alkaline electrolytes.

A multimodal flow reactor for photocatalysis under atmospheric conditions

Photocatalysis is a promising concept for the direct conversion of solar energy into fuels and chemicals. The design, experimental protocol, and performance of a multimodal and versatile flow reactor for the characterization of powdered and immobilized photocatalysts are herein presented. Ultimately, this instrument enables rigorous evaluation of photocatalysis performance metrics. The apparatus quantifies transient gas-phase reaction products via online real-time gas analyzer mass spectrometry (RTGA-MS). For H2, the most challenging gas, the photocatalytic system's RTGA-MS gas detection sensitivity spans over three orders of magnitude and can detect down to tens of parts per million under atmospheric conditions. Using Pt nanoparticles supported on anatase TiO2 photocatalyst via wet impregnation, the instrument's capability for the characterization of photocatalytic H2 evolution is demonstrated, resulting in an apparent quantum yield (AQY) of 48.1% ± 0.9% at 320 nm, 45.7% ± 0.3% at 340 nm and 31% ± 1% at 360 nm. The photodeposition of Pt on anatase TiO2 was employed to demonstrate the instrument's capability to track the transient behavior of photocatalysts, resulting in an improved 55% ± 2% AQY for H2 evolution at 340 nm from aqueous methanol. This photocatalytic instrument enables systematic study of a wide variety of photocatalytic reactions such as water splitting and CO2 reduction to valuable C2+ fuels and chemicals.

Role of Noncovalent Interactions on the Electrocatalytic Oxidation of Ethanol in Alkali Metal Hydroxide Solutions

Ethanol is considered to be one of the most promising fuels for fuel cells. However, ethanol fuel cells have a sluggish Faraday efficiency due to complex interactions between the electrolyte, electrode, and ethanol. Recent studies have further suggested that noncovalent interactions originated from the hydrated alkali metal cations and the adsorbed OH_ad at the Pt electrode surface also played an important role in the electron transfer. In this regard, the noncovalent interactions in different alkali metal hydroxide (AMH) solutions have been systematically investigated in this study, and it was observed that the noncovalent interactions could result in the occupation of the Pt electrode surface active sites and sluggish migration of ethanol molecules in the electrical double layer, significantly affecting the electro-oxidation efficiency. Further, it was concluded that the electro-oxidation efficiency in different AMH solutions followed the order of K⁺ > Na⁺ > Rb⁺ > Cs⁺ > Li⁺ due to the noncovalent interactions.

Spectroelectrochemical studies on the effect of cations in the alkaline glycerol oxidation reaction over carbon nanotube-supported Pd nanoparticles

The effects of the alkali cations Na⁺ and K⁺ were investigated in the alkaline electrochemical oxidation of glycerol over Pd nanoparticles (NPs) deposited on functionalized carbon nanotubes (CNTs). The electrocatalytic activity was assessed by cyclic voltammetry revealing a lower overpotential of glycerol oxidation for nitrogen-functionalized Pd/NCNTs compared with oxygen-functionalized Pd/OCNTs. Whereas significantly lower current densities were observed for Pd/OCNT in NaOH than in KOH in agreement with stronger non-covalent interactions on the Pd surface, Pd/NCNT achieved an approximately three-times higher current density in NaOH than in KOH. In situ electrochemistry/IR spectroscopy was applied to unravel the product distribution as a function of the applied potential in NaOH and KOH. The IR spectra exhibited strongly changing band patterns upon varying the potential between 0.77 and 1.17 V vs RHE: at low potentials oxidized C₃ species such as mesoxalate and tartronate were formed predominantly, and with increasing potentials C₂ and C₁ species originating from C–C bond cleavage were identified. The tendency to produce carbonate was found to be less pronounced in KOH. The less favored formation of highly oxidized C₃ species and of carbonate is deduced to be the origin of the lower current densities in the cyclic voltammograms (CVs) for Pd/NCNT in KOH. The enhanced current densities in NaOH are rationalized by the presence of Na⁺ ions bound to the basic nitrogen species in the NCNT support. Adsorbed Na⁺ ions can form complexes with the organic molecules, presumably enhanced by the chelate effect. In this way, the organic molecules are assumed to be bound more tightly to the NCNT support in close proximity to the Pd NPs facilitating their oxidation.

High-Performance Supported Iridium Oxohydroxide Water Oxidation Electrocatalysts

The synthesis of a highly active and yet stable electrocatalyst for the anodic oxygen evolution reaction (OER) remains a major challenge for acidic water splitting on an industrial scale. To address this challenge, we obtained an outstanding high-performance OER catalyst by loading Ir on conductive antimony-doped tin oxide (ATO)-nanoparticles by a microwave (MW)-assisted hydrothermal route. The obtained Ir phase was identified by using XRD as amorphous (XRD-amorphous), highly hydrated Ir^III/IV oxohydroxide. To identify chemical and structural features responsible for the high activity and exceptional stability under acidic OER conditions with loadings as low as 20 μg_Ir  cm^-2 , we used stepwise thermal treatment to gradually alter the XRD-amorphous Ir phase by dehydroxylation and crystallization of IrO₂ . This resulted in dramatic depletion of OER performance, indicating that the outstanding electrocatalytic properties of the MW-produced Ir^III/IV oxohydroxide are prominently linked to the nature of the produced Ir phase. This finding is in contrast with the often reported stable but poor OER performance of crystalline IrO₂ -based compounds produced through more classical calcination routes. Our investigation demonstrates the immense potential of Ir oxohydroxide-based OER electrocatalysts for stable high-current water electrolysis under acidic conditions.

On the pH Dependence of the Potential of Maximum Entropy of Ir(111) Electrodes

Studies over the entropy of components forming the electrode/electrolyte interface can give fundamental insights into the properties of electrified interphases. In particular, the potential where the entropy of formation of the double layer is maximal (potential of maximum entropy, PME) is an important parameter for the characterization of electrochemical systems. Indeed, this parameter determines the majority of electrode processes. In this work, we determine PMEs for Ir(111) electrodes. The latter currently play an important role to understand electrocatalysis for energy provision; and at the same time, iridium is one of the most stable metals against corrosion. For the experiments, we used a combination of the laser induced potential transient to determine the PME, and CO charge-displacement to determine the potentials of zero total charge, (E_PZTC). Both PME and E_PZTC were assessed for perchlorate solutions in the pH range from 1 to 4. Surprisingly, we found that those are located in the potential region where the adsorption of hydrogen and hydroxyl species takes place, respectively. The PMEs demonstrated a shift by ~30 mV per a pH unit (in the RHE scale). Connections between the PME and electrocatalytic properties of the electrode surface are discussed.

Making the hydrogen evolution reaction in polymer electrolyte membrane electrolysers even faster

Although the hydrogen evolution reaction (HER) is one of the fastest electrocatalytic reactions, modern polymer electrolyte membrane (PEM) electrolysers require larger platinum loadings (∼0.5–1.0 mg cm⁻²) than those in PEM fuel cell anodes and cathodes altogether (∼0.5 mg cm⁻²). Thus, catalyst optimization would help in substantially reducing the costs for hydrogen production using this technology. Here we show that the activity of platinum(111) electrodes towards HER is significantly enhanced with just monolayer amounts of copper. Positioning copper atoms into the subsurface layer of platinum weakens the surface binding of adsorbed H-intermediates and provides a twofold activity increase, surpassing the highest specific HER activities reported for acidic media under similar conditions, to the best of our knowledge. These improvements are rationalized using a simple model based on structure-sensitive hydrogen adsorption at platinum and copper-modified platinum surfaces. This model also solves a long-lasting puzzle in electrocatalysis, namely why polycrystalline platinum electrodes are more active than platinum(111) for the HER.

There is substantial research into minimizing platinum use in polymer electrolyte membrane electrolyzers. Here, the authors report that the hydrogen evolution activity of platinum(111) electrodes can be significantly enhanced by monolayer amounts of copper, which weaken the binding of hydrogen intermediates.