Vanadyl cationic complexes as catalysts in olefin oxidation

Systematic Development of Vanadium Catalysts for Sustainable Epoxidation of Small Alkenes and Allylic Alcohols

The catalytic epoxidation of small alkenes and allylic alcohols includes a wide range of valuable chemical applications, with many works describing vanadium complexes as suitable catalysts towards sustainable process chemistry. But, given the complexity of these mechanisms, it is not always easy to sort out efficient examples for streamlining sustainable processes and tuning product optimization. In this review, we provide an update on major works of tunable vanadium-catalyzed epoxidations, with a focus on sustainable optimization routes. After presenting the current mechanistic view on vanadium catalysts for small alkenes and allylic alcohols' epoxidation, we argue the key challenges in green process development by highlighting the value of updated kinetic and mechanistic studies, along with essential computational studies.

Mononuclear Oxidovanadium(IV) Complexes with BIAN Ligands: Synthesis and Catalytic Activity in the Oxidation of Hydrocarbons and Alcohols with Peroxides

Reactions of VCl3 with 1,2-Bis[(4-methylphenyl)imino]acenaphthene (4-Me-C6H4-bian) or 1,2-Bis[(2-methylphenyl)imino]acenaphthene (2-Me-C6H4-bian) in air lead to the formation of [VOCl2(R-bian)(H2O)] (R = 4-Me-C6H4 (1), 2-Me-C6H4 (2)). Thes complexes were characterized by IR and EPR spectroscopy as well as elemental analysis. Complexes 1 and 2 have high catalytic activity in the oxidation of hydrocarbons with hydrogen peroxide and alcohols with tert-butyl hydroperoxide in acetonitrile at 50 °С. The product yields are up to 40% for cyclohexane. Of particular importance is the addition of 2-pyrazinecarboxylic acid (PCA) as a co-catalyst. Oxidation proceeds mainly with the participation of free hydroxyl radicals, as evidenced by taking into account the regio- and bond-selectivity in the oxidation of n-heptane and methylcyclohexane, as well as the dependence of the reaction rate on the initial concentration of cyclohexane.

Redox‐active BIAN‐based Diimine Ligands in Metal‐Catalyzed Small Molecule Syntheses**

α‐Diimine ligands have significantly shaped the coordination chemistry of most transition metal complexes. Among them, bis(imino)acenaphthene ligands (BIANs) have recently been matured to great versatility and applicability to catalytic reactions. Besides variations of the ligand periphery, the great versatility of BIAN ligands resides within their ability to undergo facile electronic manipulations. This review highlights key aspects of BIAN ligands in metal complexes and summarizes recent contributions of metal‐BIAN catalysts to syntheses of small and functionalized organic molecules.

Electronic structure of the dicationic first row transition metal oxides

Multi-reference electronic structure calculations combined with large basis sets are performed to investigate the electronic structure of the ground and low-lying electronic states of the MO²⁺ diatomic species with M = Ti-Cu. These systems have shown high efficiency in the activation of the C-H of saturated hydrocarbons. This study is the first systematic and accurate work for these systems and our results and discussion provides insights into the reactivity and stability of MO²⁺ units. We find that they can be divided in three groups. The early transition metals (Ti, V, Cr) have very stable and well separated oxo (M⁴⁺O^2-) character ground states, the middle transition metals (Mn, Fe) have oxyl (M³⁺O˙^-) ground states with low-lying oxo excited states, and the late transition metals (Co, Ni, Cu) have well separated oxyl states. The reported spectroscopic constants will aid future experimental investigations, which are sparse in the literature. Periodic trends for the bond lengths, energetics, excitation energies, and wavefunction composition are discussed in detail. Complete basis set limit results indicate the high accuracy of the quintuple-ζ basis sets.

Effect of the 2-R-Allyl and Chloride Ligands on the Cathodic Paths of [Mo(η3-2-R-allyl)(α-diimine)(CO)2Cl] (R = H, CH3; α-diimine = 6,6'-Dimethyl-2,2'-bipyridine, Bis(p-tolylimino)acenaphthene)

The new, formally Mo(II) complexes [Mo(η3-2-R-allyl)(6,6'-dmbipy)(CO)2Cl] (6,6'-dmbipy = 6,6'-dimethyl-2,2'-bipyridine; 2-R-allyl = allyl for R = H, 2-methallyl for R = CH3) and [Mo(η3-2-methallyl)(pTol-bian)(CO)2Cl] (pTol-bian = bis(p-tolylimino)acenaphthene) share, in this rare case, the same structural type. The effect of the anionic π-donor ligand X (Cl- vs NCS-) and the 2-R-allyl substituents on the cathodic behavior was explored. Both ligands play a significant role at all stages of the reduction path. While 2e--reduced [Mo(η3-allyl)(6,6'-dmbipy)(CO)2]- is inert when it is ECE-generated from [Mo(η3-allyl)(6,6'-dmbipy)(CO)2(NCS)], the Cl- ligand promotes Mo-Mo dimerization by facilitating the nucleophilic attack of [Mo(η3-allyl)(6,6'-dmbipy)(CO)2]- at the parent complex at ambient temperature. The replacement of the allyl ligand by 2-methallyl has a similar effect. The Cl-/2-methallyl ligand assembly destabilizes even primary radical anions of the complex containing the strongly π-accepting pTol-Bian ligand. Under argon, the cathodic paths of [Mo(η3-2-R-allyl)(6,6'-dmbipy)(CO)2Cl] terminate at ambient temperature with 5-coordinate [Mo(6,6'-dmbipy)(CO)3]2- instead of [Mo(η3-2-R-allyl)(6,6'-dmbipy)(CO)2]-, which is stabilized in chilled electrolyte. [Mo(η3-allyl)(6,6'-dmbipy)(CO)2]- catalyzes CO2 reduction only when it is generated at the second cathodic wave of the parent complex, while [Mo(η3-2-methallyl)(6,6'-dmbipy)(CO)2]- is already moderately active at the first cathodic wave. This behavior is fully consistent with absent dimerization under argon on the cyclic voltammetric time scale. The electrocatalytic generation of CO and formate is hampered by the irreversible formation of anionic tricarbonyl complexes replacing reactive [Mo(η3-2-methallyl)(6,6'-dmbipy)(CO)2]2 along the cathodic route.

A Visible-Light-Harvesting Covalent Organic Framework Bearing Single Nickel Sites as a Highly Efficient Sulfur-Carbon Cross-Coupling Dual Catalyst

Covalent Organic Frameworks (COFs) have recently emerged as light-harvesting devices, as well as elegant heterogeneous catalysts. The combination of these two properties into a dual catalyst has not yet been explored. We report a new photosensitive triazine-based COF, decorated with single Ni sites to form a dual catalyst. This crystalline and highly porous catalyst shows excellent catalytic performance in the visible-light-driven catalytic sulfur-carbon cross-coupling reaction. Incorporation of single transition metal sites in a photosensitive COF scaffold with two-component synergistic catalyst in organic transformation is demonstrated for the first time.

Instant and quantitative epoxidation of styrene under ambient conditions over a nickel(ii)dibenzotetramethyltetraaza[14]annulene complex immobilized on amino-functionalized SBA-15

Nickel(ii)dibenzotetramethyltetraaza[14]annulene complex (Nitmtaa) was synthetized and immobilized on post amino-functionalized SBA-15 (N-SBA-15) to obtain a stable and reusable nanocatalyst named as Nitmtaa@N-SBA-15. Here (3-aminopropyl)triethoxysilane (APTES) was first grafted on the surface SBA-15, then Nitmtaa was added and coordinated on the silica surface via APTES amine groups. The structure and morphology, and thermal stability of the prepared nanocatalyst was investigated using SEM, HR-TEM, BET, FT-IR, powder XRD, and TGA. HR-TEM and XRD results revealed a high dispersion of Nitmtaa on the SBA-15 surface. The catalytic activity of this nanocatalyst was evaluated in the epoxidation of styrene, under ambient conditions, using meta-chloroperoxybenzoic acid (m-CPBA) as the oxygen donor. This nanocatalyst showed an immediate and quantitative epoxidation of styrene with high turn-over-frequency ∼31.58 s⁻¹. Moreover, the superior catalytic activity and high stability of Nitmtaa@N-SBA-15 could be maintained after four successive cycles. A possible reaction mechanism is also proposed.

Immediate and quantitative epoxidation of styrene under ambient conditions catalyzed by new nanocatalyst obtained by immobilizing nickel(ii)dibenzotetramethyltetraaza[14]annulene in amino-functionalized SBA-15.

Synthesis, properties, and catalysis of p-block complexes supported by bis(arylimino)acenaphthene ligands

Bis(arylimino)acenaphthene (Ar-BIAN) ligands have been recognized as robust scaffolds for metal complexes since the 1990 s and most of their coordination chemistry was developed with transition metals. Notably, there have been relatively few reports on complexes comprising main group elements, especially those capitalizing on the redox non-innocence of Ar-BIAN ligands supporting p-block elements. Here we present an overview of synthetic approaches to Ar-BIAN ligands and their p-block complexes using conventional solution-based methodologies and environmentally-benign mechanochemical routes. This is followed by a discussion on their catalytic properties, including comparisons to transition metal counterparts, as well as key structural and electronic properties of p-block Ar-BIAN complexes.

A New Class of Lanthanide Complexes with Three Ligand Centered Radicals: NMR Evaluation of Ligand Field Energy Splitting and Magnetic Coupling

Combination of three radical anionic Ph-BIAN ligands (Ph-BIAN=bis-(phenylimino)-acenaphthenequinone) with lanthanoid ions leads to a series of homoleptic, six-coordinate complexes of the type Ln(Ph-BIAN)₃ . Magnetic coupling data were measured by paramagnetic solution NMR spectroscopy. Combining ¹ H NMR with ² H NMR of partially deuterated compounds allowed a detailed study of the magnetic susceptibility anisotropies over a large temperature range. The observed chemical shifts were separated into ligand- and metal-centered contributions by comparison with the Y analogue (diamagnetic at the metal). The metal-centered contributions of the complexes with the paramagnetic ions could then be separated into pseudocontact and Fermi contact shifts. The latter is large within the Ph-BIAN scaffold, which shows that magnetic coupling is significant between the lanthanide ion and the radical ligand. Pseudocontact shifts were further correlated to structural data obtained from X-ray diffraction experiments. Ligand-field parameters were determined by fitting the temperature dependence of the observed magnetic susceptibility anisotropies. The electronic structure determined by this approach shows, that the Er and Tm analogues are candidates for single molecule magnets (SMM). These results demonstrate the possibilities for the application of NMR spectroscopy in investigations of paramagnetic systems in general and single molecule magnets in particular.

Molybdenum(ii) complexes with p-substituted BIAN ligands: synthesis, characterization, biological activity and computational study

New complexes [Mo(η3-C3H5)X(CO)2(4-Y-BIAN)] (4-Y-BIAN = bis(4-Y-phenyl)-acenaphthenequinonediimine), with X = Br and Y = H, Me, OMe, COOH and X = Cl, Y = OMe, as well as the cation with X = NCMe and Y = OMe were synthesized, expanding the scope of this family. Two single crystal X-ray structures (X = Br, Y = Me, OMe) display a less symmetric arrangement (axial isomer), where one N donor atom is trans to the allyl group and the second to one CO. DFT studies showed similar energies for the two possible isomers of the complexes, with a very small preference for the observed axial isomer. The HOMO of the complexes is localized in the metal and the HOMO-1 of the oxidized species has a contribution from the BIAN ligand, while the LUMO is fully localized in BIAN. Electrochemical studies showed one process corresponding to the oxidation of Mo(ii) to Mo(iii) for complexes with X = Br, Y = H, Me, and two oxidation reactions for those with X = Br, Y = Cl, OMe, while the COOH derivative exhibited no oxidation wave. The antitumor effect of the complexes with X = Br was tested in cancer lines, and the H and OMe complexes were particularly active, with EC50 values below 8 μM in HeLa cell lines. The DNA binding constants determined by titration experiments were comparable with those of doxorubicin and ethidium bromide, suggesting a mechanism of action based on intercalation in DNA.

Redox activity of nickel and vanadium porphyrins: a possible mechanism behind petroleum genesis and maturation?

The presence of metalloporphyrins in crude oil has been known for many years. In contrast, their role on the physical-chemical properties is only now beginning to be understood. In this study, we test using high-level ab initio calculations, the hypothesis of a possible redox catalytic activity of vanadium and nickel metalloporphyrins in crude oil, illustrated by the oxidation of methanol to formaldehyde and hydrogen dissociation, respectively. This process which may take place during petroleum genesis and maturation, explains some of its physical-chemical properties, such as polar chains, the absence of alcohols, the trapping of porphyrins within macromolecular aggregates.

Environmental friendly method of the epoxidation of limonene with hydrogen peroxide over the Ti-SBA-15 catalyst

This work presents the studies on the epoxidation of limonene to 1,2-epoxylimonene with hydrogen peroxide and over the titanium-silicate Ti-SBA-15 catalyst. The main object of the research was a solvent effect on the epoxidation process. The influence of solvents, such as: methanol, toluene, propan-2-ol (isopropyl alcohol), acetonitrile and ethanol has been studied. Furthermore, the influence of temperature in the range of 0-120°C and the reaction time in the range of 0.25-48 h have been investigated. Gas chromatography and iodometric titration methods were used to establish the products of this process and amount of the unreacted hydrogen peroxide. 1,2-Epoxylimonene, 1,2-epoxylimonene diol, perillyl alcohol, carvone and carveol have been determined as the main products of this process. All these compounds are very valuable raw materials for organic syntheses, medicine or cosmetic and food industry.

Catalytic Applications of Vanadium: A Mechanistic Perspective

The chemistry of vanadium has seen remarkable activity in the past 50 years. In the present review, reactions catalyzed by homogeneous and supported vanadium complexes from 2008 to 2018 are summarized and discussed. Particular attention is given to mechanistic and kinetics studies of vanadium-catalyzed reactions including oxidations of alkanes, alkenes, arenes, alcohols, aldehydes, ketones, and sulfur species, as well as oxidative C-C and C-O bond cleavage, carbon-carbon bond formation, deoxydehydration, haloperoxidase, cyanation, hydrogenation, dehydrogenation, ring-opening metathesis polymerization, and oxo/imido heterometathesis. Additionally, insights into heterogeneous vanadium catalysis are provided when parallels can be drawn from the homogeneous literature.

New oxidovanadium(iv) complex with a BIAN ligand: synthesis, structure, redox properties and catalytic activity

The combination of a new oxidovanadium(iv) complex1with pyrazine-2-carboxylic acid (PCA; a cocatalyst) affords a catalytic system for the efficient oxidation of saturated hydrocarbons.

Synthesis of a highly dispersed CuO catalyst on CoAl-HT for the epoxidation of styrene

Non-noble CuO/CoAl-HT catalyst with high dispersion and rich electronic density exhibits excellent catalytic performance for the epoxidation of styrene.

A Carbohydrate-Derived Splice Modulator

Small-molecule splice modulators have recently been recognized for their clinical potential for diverse cancers. This, combined with their use as tools to study the importance of splice-regulated events and their association with disease, continues to fuel the discovery of new splice modulators. One of the key challenges found in the current class of materials arises from their instability, where rapid metabolic degradation can lead to off-target responses. We now describe the preparation of bench-stable splice modulators by adapting carbohydrate motifs as a central scaffold to provide rapid access to potent splice modulators.

Tunable Electrochemical and Catalytic Features of BIAN- and BIAO-Derived Ruthenium Complexes

This article deals with a class of ruthenium-BIAN-derived complexes, [Ru(II)(tpm)(R-BIAN)Cl]ClO4 (tpm = tris(1-pyrazolyl)methane, R-BIAN = bis(arylimino)acenaphthene, R = 4-OMe ([1a]ClO4), 4-F ([1b]ClO4), 4-Cl ([1c]ClO4), 4-NO2 ([1d]ClO4)) and [Ru(II)(tpm)(OMe-BIAN)H2O](2+) ([3a](ClO4)2). The R-BIAN framework with R = H, however, leads to the selective formation of partially hydrolyzed BIAO ([N-(phenyl)imino]acenapthenone)-derived complex [Ru(II)(tpm)(BIAO)Cl]ClO4 ([2]ClO4). The redox-sensitive bond parameters involving -N═C-C═N- or -N═C-C═O of BIAN or BIAO in the crystals of representative [1a]ClO4, [3a](PF6)2, or [2]ClO4 establish its unreduced form. The chloro derivatives 1a(+)-1d(+) and 2(+) exhibit one oxidation and successive reduction processes in CH3CN within the potential limit of ±2.0 V versus SCE, and the redox potentials follow the order 1a(+) < 1b(+) < 1c(+) < 1d(+) ≈ 2(+). The electronic structural aspects of 1a(n)-1d(n) and 2(n) (n = +2, +1, 0, -1, -2, -3) have been assessed by UV-vis and EPR spectroelectrochemistry, DFT-calculated MO compositions, and Mulliken spin density distributions in paramagnetic intermediate states which reveal metal-based (Ru(II) → Ru(III)) oxidation and primarily BIAN- or BIAO-based successive reduction processes. The aqua complex 3a(2+) undergoes two proton-coupled redox processes at 0.56 and 0.85 V versus SCE in phosphate buffer (pH 7) corresponding to {Ru(II)-H2O}/{Ru(III)-OH} and {Ru(III)-OH}/{Ru(IV)═O}, respectively. The chloro (1a(+)-1d(+)) and aqua (3a(2+)) derivatives are found to be equally active in functioning as efficient precatalysts toward the epoxidation of a wide variety of alkenes in the presence of PhI(OAc)2 as oxidant in CH2Cl2 at 298 K, though the analogous 2(+) remains virtually inactive. The detailed experimental analysis with the representative precatalyst 1a(+) suggests the involvement of the active {Ru(IV)═O} species in the catalytic cycle, and the reaction proceeds through the radical mechanism, as also supported by the DFT calculations.

Industrial resin “INDION 130” modified with vanadyl cations as highly efficient heterogeneous catalyst for epoxidation of fatty compounds with TBHP as oxidant

Cation exchanger INDION 130 modified with vanadyl cations was found to be readily prepared and reusable and exhibited higher catalytic activity than the homogeneous oxo-vanadium catalyst for epoxidation of fatty compounds.