Solvent-Free Process for Preparing Metal-Organic Framework Composites Based on Carbon-Based Quantum Dots and Their Derivatives as Drug Delivery Systems for Andrographolide

Andrographolide (ADG) was conjugated with MIL-53(Al), ZIF-8, carbon-based quantum dots (CBQDs) and doped carbon-based quantum dots (D-CBQDs) using high-pressure (0.3 GPa) contact. This solvent-free approach is environmentally friendly, energy-efficient, and time-saving, resulting in ADG-MOFs-CBQDs/D-CBQDs with physical properties comparable to those produced by traditional liquid phase encapsulation. The resulting nanocomposites were characterized using SEM, XRD, TGA, FT-IR, and 1H NMR. The results indicate that ADG was partly encapsulated within the metal-organic framework (MOF) pores, while another portion was bound externally to CBQD/D-CBQDs, as evidenced by distinct drug signals in each analysis. This green synthesis approach simplifies the conjugation process. It significantly enhances the drug solubility, as indicated by changes in hydrophobicity observed via 1H NMR, surpassing the improvements achieved by ADG encapsulation within MOFs alone. Additionally, in preliminary tests, the materials exhibited significant cytotoxicity against PC3 cells compared to ADG (25.05 ± 0.06 µg/mL) after 48 hours of exposure.

Gamma Irradiation Synthesis of Sugar-Derived Carbon-Dot-Functionalized Glutathione for Hg2+ Detection and Antioxidant Activity

Mercury, a particularly toxic heavy metal from industrial processes, poses significant risks to both people and the environment when it accumulates to dangerous levels, damaging the liver, kidneys, and nervous system. Therefore, fluorescent organic carbon dots (CDs) were developed for detecting Hg2+ ions. These CDs were easily synthesized, chemically stable, biocompatible, low in toxicity, and environmentally friendly. In this work, glutathione-functionalized CDs (CDs-GSH) were produced from sugar using the EDC/NHS coupling method. Gamma irradiation induced the chemical reactions necessary to produce fluorescent CDs. CDs-GSH demonstrated significant selectivity for Hg2+ with an 83% reduction in fluorescence intensity. Additionally, they exhibited a phenolic content of 19.1 μg/mg GAE and strong antioxidant characteristics, with DPPH radical scavenging activity of 63% at 1.0 mg/mL. Due to their stability, selectivity, and antioxidant qualities, high-value CDs can be produced from table sugar using an environmentally friendly synthesis process, offering potential applications in sensing and antioxidant activity.

On-Off-On Fluorometric Detection of Hg(II) and L-Cysteine Using Red Emissive Nitrogen-Doped Carbon Dots for Environmental and Clinical Sample Analysis

This research introduces a novel fluorescence sensor 'on-off-on' employing nitrogen-doped carbon dots (N-CDs) with an 'on-off-on' mechanism for the selective and sensitive detection of Hg(II) and L-cysteine (L-Cys). N-CDs was synthesized using citric acid as the carbon precursor and urea as the nitrogen source in dimethylformamide (DMF) solvent, resulting in red emissive characteristics under UV light. Comprehensive spectroscopic analyses, including UV-Vis, fluorescence, FT-IR, XRD, XPS, Raman, and Zeta potential techniques, validated the structural and optical characteristics of the synthesized N-CDs. The maximum excitation and emission of N-CDs were observed at 548 and 622 nm, respectively. The quantum yield of N-CDs was calculated to be 16.1%. The fluorescence of N-CDs effectively quenches upon the addition of Hg(II) due to the strong coordination between Hg(II) and the surface functionalities of N-CDs. Conversely, upon the subsequent addition of L-Cys, the fluorescence of N-CDs was restored. This restoration can be attributed to the stronger affinity of the -SH group in L-Cys towards Hg(II) relative to the surface functionalities of N-CDs. This dual-mode response enabled the detection of Hg(II) and L-Cys with impressive detection limits of 15.1 nM and 8.0 nM, respectively. This sensor methodology effectively detects Hg(II) in lake water samples and L-Cys levels in human urine, with a recovery range between 99 and 101%. Furthermore, the N-CDs demonstrated excellent stability, high sensitivity, and selectivity, making them a promising fluorescence on-off-on probe for both environmental monitoring of Hg(II) and clinical diagnostics of L-Cys.

A Facile One-Step Self-Assembly Strategy for Novel Carbon Dots Supramolecular Crystals with Ultralong Phosphorescence Controlled by NH4. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024;20:e2402236. [PMID: 38970543 DOI: 10.1002/smll.202402236] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

A new methodological design is proposed for carbon dots (CDs)-based crystallization-induced phosphorescence (CIP) materials via one-step self-assembled packaging controlled by NH4 +. O-phenylenediamine (o-PD) as a nitrogen/carbon source and the ammonium salts as oxidants are used to obtain CDs supramolecular crystals with a well-defined staircase-like morphology, pink fluorescence and ultralong green room-temperature phosphorescence (RTP) (733.56 ms) that is the first highest value for CDs-based CIP materials using pure nitrogen/carbon source by one-step packaging. Wherein, NH4 + and o-PD-derived oxidative polymers are prerequisites for self-assembled crystallization so as to receive the ultralong RTP. Density functional theory calculation indicates that NH4 + tends to anchor to the dimer on the surface state of CDs and guides CDs to cross-arrange in an X-type stacking mode, leading to the spatially separated frontier orbitals and the through-space charge transfer (TSCT) excited state in turn. Such a self-assembled mode contributes to both the small singlet-triplet energy gap (ΔEST) and the fast inter-system crossing (ISC) process that is directly related to ultralong RTP. This work not only proposes a new strategy to prepare CDs-based CIP materials in one step but also reveals the potential for the self-assembled behavior controlled by NH4 +.

Sustainable synthesis of carbon dots via bio-waste recycling for biomedical imaging

Bio-waste is a side product of biomedical research containing carbon, which can be utilized for developing carbon dots (CDs). CDs are known to be useful for a variety of applications because of their unique photoluminescence, low toxicity, and straightforward synthesis. In this paper, we employed a one-step hydrothermal method to prepare CDs from bio-waste as the only reactant. The as-synthesized Cell-CDs were found to be chemically stable and biocompatible. In addition, the spectra of Cell-CDs' emissions covered the visible light, which is ideal for super-resolution imaging. Particularly, dual-color imaging can be achieved, for example, by staining the plasma membrane with Cell-CDs emitting one color and staining cytosolic organelles with Cell-CDs emitting a different color of fluorescence. Here, we demonstrate such applications by studying the subcellular dynamics of live cells.

A carbon dots-MnO2 nanosheet-based turn-on pseudochemodosimeter as low-cost probe for selective detection of hazardous mercury ion contaminations in water

Mercury is a highly hazardous element due to its profound toxicity and wide abundance in the environment. Despite the availability of various fluorimetric detection tools for Hg2+, including organic fluorophores and aptasensors, they often suffer from shortcomings like the utilization of expensive chemicals and toxic organic solvents, multi-step synthesis, sometimes with poor selectivity and low sensitivity. Whereas, biomass-derived fluorophores, such as carbon dots (CDs), present themselves as cost-effective and environmentally benign alternatives that exhibit comparable efficacy. Herein, we report a reaction-driven sensing assembly based on CDs, MnO2 nanosheets, and hydroquinone monothiocarbonate (HQTC) for the detection of Hg2+ ions, which relies on the formation of a CDs-MnO2 FRET-conjugate, resulting in the quenching of the intrinsic fluorescence of CDs. In a pseudochemodosimetric approach, the thiophilic nature of mercury was utilized for in-situ generation of the reducing species, hydroquinone from HQTC, resulting in the reduction of MnO2 nanosheets, the release of fluorescent CDs back to the solution. The low limit of detection (LOD) was achieved as 2 ppb (0.01 μM). The probe worked efficiently in real water samples like sea, river with good recovery of spiked Hg2+ and in some Indian ayurvedic medicines as well. Furthermore, solid-phase detection with sodium alginate beads demonstrated the ability of this cost-effective sensing assembly for onsite detection of Hg2+ ions.

CARBON DOTS: Bioimaging and Anticancer Drug Delivery

Cancer, responsible for approximately 10 million lives annually, urgently requires innovative treatments, as well as solutions to mitigate the limitations of traditional chemotherapy, such as long-term adverse side effects and multidrug resistance. This review focuses on Carbon Dots (CDs), an emergent class of nanoparticles (NPs) with remarkable physicochemical and biological properties, and their burgeoning applications in bioimaging and as nanocarriers in drug delivery systems for cancer treatment. The review initiates with an overview of NPs as nanocarriers, followed by an in-depth look into the biological barriers that could affect their distribution, from barriers to administration, to intracellular trafficking. It further explores CDs' synthesis, including both bottom-up and top-down approaches, and their notable biocompatibility, supported by a selection of in vitro, in vivo, and ex vivo studies. Special attention is given to CDs' role in bioimaging, highlighting their optical properties. The discussion extends to their emerging significance as drug carriers, particularly in the delivery of doxorubicin and other anticancer agents, underscoring recent advancements and challenges in this field. Finally, we showcase examples of other promising bioapplications of CDs, emergent owing to the NPs flexible design. As research on CDs evolves, we envisage key challenges, as well as the potential of CD-based systems in bioimaging and cancer therapy.

Carbon Dots: From Synthesis to Unraveling the Fluorescence Mechanism

Carbon dots (CDs) being a new type of carbon-based nanomaterial have attracted intensive interest from researchers owing to their excellent biophysical properties. CDs are a class of fluorescent carbon nanomaterials that have emerged as a promising alternative to traditional quantum dots and organic dyes in applications including bioimaging, sensing, and optoelectronics. CDs possess unique optical properties, such as tunable emission, facile synthesis, and low toxicity, making them attractive for many applications in biology, medicine, and environmental areas. The synthesis of CDs is achievable by a variety of methods, including bottom-up and top-down approaches, involving the use of different carbon sources and surface functionalization strategies. However, understanding the fluorescence mechanism of CDs remains a challenge. Various mechanistic models have been proposed to explain their origin of luminescence. This review summarizes the recent developments in the synthesis and functionalization of CDs and provides an overview of the current understanding of the fluorescence mechanism.

Chitosan-PEI passivated carbon dots for plasmid DNA and miRNA-153 delivery in cancer cells

These days carbon dots have been developed for multiple biomedical applications. In the current study, the transfection potential of synthesized carbon dots from single biopolymers such as chitosan, PEI-2kDa, and PEI-25kDa (CS-CDs, PEI2-CDs, and PEI25-CDs) and by combining two biopolymers (CP2-CDs and CP25-CDs) through a bottom-up approach have been investigated. The characterization studies revealed successful synthesis of fluorescent, positively charged carbon dots <20 nm in size. Synthesized carbon dots formed a stable complex with plasmid DNA (EGFP-N1) and miRNA-153 that protected DNA/miRNA from serum-induced degradation. In-vitro cytotoxicity analysis revealed minimal cytotoxicity in cancer cell lines (A549 and MDA-MB-231). In-vitro transfection of EGFP-N1 plasmid DNA with PEI2-CDs, PEI25-CDs and CP25-CDs demonstrated that these CDs could strongly transfect A549 and MDA-MB-231 cells. The highest EGFP-N1 plasmid transfection efficiency was observed with PEI2-CDs at a weight ratio of 32:1. PEI25-CDs polyplex showed maximum transfection at a weight ratio of 8:1 in A549 at a weight ratio of 16:1 in MDA-MB-231 cells. CP25-CDs exhibited the highest transfection at a weight ratio of 16:1 in both cell lines. The in-vitro transfection of target miRNA, i.e., miR-153 in A549 and MDA-MB-231 cells with PEI2-CDs, PEI25-CDs, and CP25-CDs suggested successful transfer of miR-153 into cells which induced significant cell death in both cell lines. Importantly, CS-CDs and CP2-CDs could be tolerated by cells up to 200 μg/mL concentration, while PEI2-CDs, PEI25-CDs, and CP25-CDs showed non-cytotoxic behavior at low concentrations (25 μg/mL). Together, these results suggest that a combination of carbon dots synthesized from chitosan and PEI (CP25-CDs) could be a novel vector for transfection nucleic acids that can be utilized in cancer therapy.

Multicolor Photoluminescent Carbon Dots à La Carte for Biomedical Applications

Dual-emission fluorescence probes that provide high sensitivity are key for biomedical diagnostic applications. Nontoxic carbon dots (CDs) are an emerging alternative to traditional fluorescent probes; however, robust and reproducible synthetic strategies are still needed to access materials with controlled emission profiles and improved fluorescence quantum yields (FQYs). Herein, we report a practical and general synthetic strategy to access dual-emission CDs with FQYs as high as 0.67 and green/blue, yellow/blue, or red/blue excitation-dependent emission profiles using common starting materials such as citric acid, cysteine, and co-dopants to bias the synthetic pathway. Structural and physicochemical analysis using nuclear magnetic resonance, absorbance and fluorescence spectroscopy, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy in addition to transmission electron and atomic force microscopy (TEM and AFM) is used to elucidate the material's composition which is responsible for the unique observed photoluminescence properties. Moreover, the utility of the probes is demonstrated in the clinical setting by the synthesis of green/blue emitting antibody-CD conjugates which are used for the immunohistochemical staining of human brain tissues of glioblastoma patients, showing detection under two different emission channels.

Fluorescence "Turn OFF-ON" detection of Fe3+ and propiconazole pesticide using blue emissive carbon dots from lemon peel

In this study, water-soluble carbon dots (CDs) were employed as a novel fluorescence "turn OFF-ON" sensor to detect Fe³⁺ ions in pharmaceutical sample and propiconazole (PC) in food samples. Blue fluorescent "LPCDs" are synthesized from the lemon peel that exhibited emission at 468 nm when excited at 378 nm. The average size of the as-prepared LPCDs is 2.03 nm, displaying a quantum yield of 32 %. Fluorescence "turn OFF-ON" strategy was developed for sensing of Fe³⁺ ion and PC, demonstrating favorable linearity in the range of 0.5-180 μM and 0.1-40 μM with the detection limits of 0.18 μM and 0.054 μM for Fe³⁺ and PC, respectively. Further, LPCDs-loaded cellulose paper was used as visual reader to detect Fe³⁺ and PC. This approach was effectively applied to detect Fe³⁺ and PC in pharmaceutical and vegetable samples.

Heating-free synthesis of red emissive carbon dots through separated processes of polymerization and carbonization

Polymerization and carbonization are believed as two basic processes for the bottom-up synthesis of carbon dots (CDs). Since these two processes usually occur simultaneously due to the high reaction temperature and fast reaction rate, it is still a challenge to separate and control these two processes. In the present work, we reported a new room temperature method, which achieved the separated and controlled polymerization and carbonization processes. The polymerization process is realized by dissolving o-phenylenediamine (OPD) in ethanol at room temperature, and finally obtained polymer dots (PDs) without any lattice with a sphere size of 29.6 nm. The carbonization process begins in a manual way by adding concentrated sulfuric acid. After carbonization, CDs (noted as CPDs in this work) with a size of 3.6 nm and a clear lattice can be obtained. Importantly, the separated polymerization and carbonization make us possible to adjust the composition or interactions of intermediate products during the synthesis process. As a prototype, we added acetic acid (AA) additives into OPD precursors during the polymerization stage. Due to the crosslink enhanced emission (CEE) effect via hydrogen bonds which are produced by the amide groups from AA reaction products with H in the -NH₃⁺ or aromatic ring, the resulted CPDs show improved PLQY from an initial 6.87% (without AA) to 16.47%. The current work realized the separated and controllable polymerization and carbonization processes, opening up the door for tuning the composition and interactions of intermediate products before carbonization.

Cancer cells inhibition by cationic carbon dots targeting the cellular nucleus

Nucleus targeting is tremendously important in cancer therapy. Cationic carbon dots (CCDs) are potential nanoparticles which might enter cells and penetrate nuclear membranes. Although some CCDs have been investigated in nucleus targeting and applied in nuclear imaging, the CCDs derived from drugs, that are able to target the nucleus, bind with DNA and inhibit the growth of cancer cells have not been reported. In this project, 1, 2, 4, 5-benzenetetramine (Y15, a focal adhesion kinase inhibitor) derived cationic carbon dots (Y15-CDs) were prepared via a hydrothermal approach utilizing Y15, folic acid and 1,2-ethylenediamine as precursors. Based on the structural, optical, and morphologic characterizations, Y15-CDs possess rich amine groups and nitrogen in structure, an excitation-dependent photoluminescence emission, and a small particle size of 2 to 4 nm. The DNA binding experiments conducted through agarose gel electrophoresis, UV-vis absorption, fluorescence emission, and circular dichroism spectroscopies, prove that Y15-CDs might bind with DNA via electrostatic interactions and partially intercalative binding modes. In addition, the cell imaging and cytotoxicity studies in human foreskin fibroblasts (HFF), prostate cancer (PC3) and osteosarcoma cells (U2OS) indicate the nucleus targeting and anticancer abilities of Y15-CDs. Most interestingly, Y15-CDs exhibit a higher cytotoxicity to cancer cells (PC3 and U2OS) than to normal cells (HFF), inferring that Y15-CDs might be potentially applied in cancer therapy.

Preparation of carbon quantum dots from ionic liquid modified biomass for the detection of Fe3+ and Pd2+ in environmental water

A new type of green carbon quantum dots (ILB-CQDs) was prepared by hydrothermal method using ionic liquid as a modifier and grape skin as carbon source, and was obtained from hydrogen-bonded lattice structure ionic liquid preparation, which makes the CQDs in a ring-like stable structure with a stability period of more than 90 day. There is also the catalytic effect of the ionic liquid on cellulose, which makes the prepared CQDs show good advantages, such as uniform particle size, high quantum yield (26.7%), and very good fluorescence performance. This is a smart material for the selective detection of Fe³⁺ and Pd²⁺. It has a detection limit of 0.001 nM for Fe³⁺ and 0.23 µM for Pd²⁺ in pure water. It has a detection limit of 3.2 nmol/L for Fe³⁺ and 0.36 µmol/L for Pd²⁺ in actual water, both of which meet the requirements of WHO drinking water standards. And there is to achieve more than 90% of water restoration effect.

Bioengineered dual fluorescent carbon nano dots from Indian long pepper leaves for multifaceted environmental and health utilities

In this article, we present the synthesis of Piper longum leaves-derived ethanolic carbon dots (PLECDs) using the most simplistic environmentally friendly solvothermal carbonization method. The PLECDs fluoresced pink color with maximum emission at 670 nm at 397 nm excitation. Additionally, the dried PLECDs dissolved in water showed green fluorescence with higher emission at 452 nm at 370 nm excitation. The UV spectra showed peaks in the UV region (271.25 nm and 320.79 nm) and a noticeable tail in the visible region, signifying the efficient synthesis of nano-sized carbon particles and the Mie scattering effect. Various functional groups (-OH, -N-H, -C-H, -C = C, -C-N, and -C-O) were identified using Fourier transform infrared spectroscopy (FTIR). Its nanocrystalline property was revealed by the sharp peaks in the X-ray diffraction (XRD). High-resolution transmission electron microscopy (HRTEM) photomicrograph displayed a roughly spherical structure with a mean size of 2.835 nm. The energy dispersive X-ray (EDAX) and X-ray photoelectron spectroscopy (XPS) revealed the elemental abundance of C, O, and N. The high-performance thin-layer chromatography (HPTLC) fingerprint of PLECDs showed an altered pattern than its precursor (Piper longum leaves ethanolic extract or PLLEE). The PLECDs sensed Cu²⁺ selectively with a limit of detection (LOD) and limit of quantification (LOQ) of 0.063 μM and 0.193 μM, respectively. It showed excellent cytotoxicity toward MDA-MB-231 (human breast cancer), SiHa (human cervical carcinoma), and B16F10 (murine melanoma) cell lines with excellent in vitro bioimaging outcomes. It also has free radical scavenging activity. The PLECDs also showed outstanding bacterial biocompatibility, pH-dependent fluorescence stability, photostability, physicochemical stability, and thermal stability.

Application of green-synthesized carbon dots for imaging of cancerous cell lines and detection of anthraquinone drugs using silica-coated CdTe quantum dots-based ratiometric fluorescence sensor

Chemotherapy drugs of daunorubicin and doxorubicin treat cancers with many side effects. So, detection of them in the biological system for regulation and controlling of usage is essential. In this study, a ratiometric fluorescent method was introduced for detection of daunorubicin and doxorubicin using bell pepper-based carbon dots, as the variable signal, and silica-coated CdTe quantum dots, as the constant signal. The detection was done based on variations of carbon dots intensity in the presence of drugs in comparison with the constant intensity of silica-coated CdTe quantum dots. The proposed ratiometric fluorescent method was successfully used for detection of daunorubicin and doxorubicin range of 54.37-13594.34 nmolL^-1 and 86.2-17242 nmolL^-1, with a detection limit of 18.53 nmolL^-1 and 29 nmolL^-1, respectively. Also, this method was used for detection of drugs in serum samples with recovery ranges of 86.14-99.62 (RSD 3-1.47%) and 86.32-97.53 (3.38-1.48%), respectively. Finally, after evaluation of carbon dots toxicity by MTT test, carbon dots was applied for imaging of prostate cancer cell lines (PC-3) and breast cancer cell lines (MCF7). The results demonstrated that despite improvement of the repeatability and interferences reduction by ratiometric method, also carbon dots were successfully applied for imaging of cell lines.

Picomolar Detection of Lead Ions (Pb2+) by Functionally Modified Fluorescent Carbon Quantum Dots from Watermelon Juice and Their Imaging in Cancer Cells

Water contamination due to the presence of lead is one of the leading causes of environmental and health hazards because of poor soil and groundwater waste management. Herein we report the synthesis of functionally modified luminescent carbon quantum dots (CQDs) obtained from watermelon juice as potential nanomaterials for the detection of toxic Pb²⁺ ions in polluted water and cancer cells. By introducing surface passivating ligands such as ethanolamine (EA) and ethylenediamine (ED) in watermelon juice, watermelon-ethanolamine (WMEA)-CQDs and watermelon-ethylenediamine (WMED)-CQDs exhibited a remarkable ~10-fold and ~6-fold increase in fluorescence intensity with respect to non-doped WM-CQDs. The relative fluorescence quantum yields of WMEA-CQDs and WMED-CQDs were found to be 8% and 7%, respectively, in an aqueous medium. Among various functionally-modified CQDs, only WMED-CQDs showed high selectivity towards Pb²⁺ ions with a remarkably good limit of detection (LoD) of 190 pM, which is less than that of the permissible limit (72 nM) in drinking water. The functionally altered WMED-CQDs detected Pb²⁺ metal ions in polluted water and in a human cervical cancer cell line (HeLa), thus advocating new vistas for eco-friendly nanomaterials for their use as diagnostic tools in the environment and biomedical research areas.

Dual mode detection and sunlight-driven photocatalytic degradation of tetracycline with tailor-made N-doped carbon dots

Carbon dots have emerged as one of the most promising materials with various potential applications derived from their unique photophysical and chemical properties. The present work investigates the electrochemical and photochemical properties of one-pot synthesized carbon dots for environmental sustainability. Facile microwave-assisted pyrolysis of urea and glucose yielded nitrogen doped carbon dots (N-doped carbon dots) with blue fluorescence and a quantum yield of 14.9%. As synthesized N- doped carbon dot had intense fluorescence, stability, water solubility, and biocompatibility. In the sensing studies, N-doped carbon dots appeared as a dual sensor for drug tetracycline with excellent sensitivity and selectivity. Beyond sense, the carbon dots have the potential to act as a photocatalyst for the degradation of tetracycline. Further, N-doped carbon dot could bring exhaustive degradation of tetracycline (>95%) within 10 min in the absence of any additives. This is the first time report on the utilization of raw non-metal doped carbon dots as a photocatalyst for the degradation of tetracycline.

Sonochemical synthesized BaMoO4/ZnO nanocomposites as electrode materials: A comparative study on GO and GQD employed in hydrogen storage

Due to poor rate proficiency and electrochemical capacity of transition metal oxides, production electrode materials as operative way to develop the electrochemical performance is a crucial strategy to make sure the great electroactive sites and fast electron/ion diffusion route. In order to solve this problem, carbon-based nanocomposites as conductive substrates are applied. The nanostructured BaMoO₄/ZnO was produced by sonochemical method in the presence of tween 20 as stabilizing agent. Effect of graphene quantum dots (GQDs) and graphene oxide (GO) for developing hydrogen capacity of BaMoO₄/ZnO was studied by providing representative composites of BaMoO₄/ZnO-GQDs and BaMoO₄/ZnO-GO. For this purpose, GQDs was synthesized using green source of Spiraea crenata and the GO provided by commercial company. The structural analysis shows preparation of scales-like morphology of BaMoO₄/ZnO without any impurities through SEM, TEM, XRD, EDS and FT-IR characterization data. Also, the specific surface area for BaMoO₄/ZnO-GQDs (11 m²/g) and BaMoO₄/ZnO-GO (124 m²/g) nanocomposites increased by comparing to BaMoO₄/ZnO (9.1 m²/g). The resultant nanocomposites used as new active compounds for applying in hydrogen storage strategies using cyclic voltammetry and chronopotentiometry tests. Comprehensively, the hydrogen capacitance after 15 cycles was demonstrated on the nanostructured BaMoO₄/ZnO about 129 mAhg^-1. It demanded the maximum capacitance for BaMoO₄/ZnO-GQDs and BaMoO₄/ZnO-GO nanocomposites were 284 and 213 mAhg^-1 respectively, which was higher than the initial nanostructured BaMoO₄/ZnO. It was exposed from the carbon based structured that; the endorsed electrochemical hydrogen storage (EHS) performance is ascribed to the reaction of the redox pair of Mo⁶⁺ /Mo⁵⁺ at the active sites throughout the EHS procedure. This study delivers a novel plan and potential sorption electrode materials to progress the intrinsic action of conductive compounds.

Mesoporous silica imprinted carbon dots for the selective fluorescent detection of triclosan

A molecularly imprinted fluorescence sensor built as a mesoporous structured silica imprinted layer on the surface of carbon dots (CDs@m-MIP) was employed for the selective detection of triclosan (TRI). The fluorescence of this CDs@m-MIP was affected sensitively and selectively by TRI via an electron transfer-induced fluorescence quenching mechanism with a detection limit of TRI at 1.08 nM (range 1.72-138 nM) under the optimum setup (e.g., pH, response time, and CDs@m-MIP dose). This approach was used successfully to detect TRI in real water samples (e.g., sewage, river, and tap water). The recoveries of TRI were satisfactory in spiked river and tap water (in 94.7-99.5 %). The outcome of this research is thus expected to help develop highly efficient fluorescent sensing systems towards diverse hazardous compounds including TRI.

Carbon dots derived from frankincense soot for ratiometric and colorimetric detection of lead (II)

We report a simple one-pot hydrothermal synthesis of carbon dots from frankincense soot. Carbon dots prepared from frankincense (FI-CDs) have narrow size distribution with an average size of 1.80 nm. FI-CDs emit intense blue fluorescence without additional surface functionalization or modification. A negative surface charge was observed for FI-CDs, indicating the abundance of epoxy, carboxylic acid, and hydroxyl functionalities that accounts for their stability. A theoretical investigation of the FI-CDs attached to oxygen-rich functional groups is incorporated in this study. The characteristics of FI-CDs signify arm-chair orientation, which is confirmed by comparing the indirect bandgap of FI-CDs with the bandgap obtained from Tauc plots. Also, we demonstrate that the FI-CDs are promising fluoroprobes for the ratiometric detection of Pb²⁺ions (detection limit of 0.12μM). The addition of Pb²⁺to FI-CD solution quenched the fluorescence intensity, which is observable under illumination by UV light LED chips. We demonstrate a smartphone-assisted quantification of the fluorescence intensity change providing an efficient strategy for the colorimetric sensing of Pb²⁺in real-life samples.

From 0D to 2D: N-doped carbon nanosheets for detection of alcohol-based chemical vapours

The application of N-doped carbon nanosheets, with and without embedded carbon dots, as active materials for the room temperature chemoresistive detection of methanol and/or ethanol is presented. The new carbons were made by converting 0D N-doped carbon dots (NCDs) to 2D nitrogen-doped carbon nanosheets by heat treatment (200–700 °C). The nanosheets exhibited a lateral size of ∼3 μm and a thickness of ∼12 nm at the highest annealing temperature. Both Raman and TEM analyses showed morphological transitions of the dots to the sheets, whilst XPS analysis revealed transformation of the N-bonding states with increasing temperature. PDF analysis confirmed the presence of defective carbon sheets. Room temperature screening of the chemical vapours of two alcohols (methanol and ethanol), revealed that the structure and the type of N-configuration influenced the detection of the chemical vapours. For instance, the lateral size of the nanosheets and the high charge density N-configurations promoted detection of both methanol and ethanol vapours at good sensitivity (−16.8 × 10⁻⁵ ppm⁻¹_EtOH and 1.2 × 10⁻⁵ ppm⁻¹_MeOH) and low LoD (∼44 ppm_EtOH and ∼30.3 ppm_MeOH) values. The study showed that the composite nature as well as the large basal area of the carbon nanosheets enabled generation of adequate defective sites that facilitated easy adsorption of the VOC analyte molecules, thereby eliminating the need to use conducting polymers or the formation of porous molecular frameworks for the alcohol detection.

2D layered carbon nanostructures made by annealing 0D carbon dots, have been used as ethanol/methanol sensors.

Biomass-derived carbon dots as a sensitive and selective dual detection platform for fluoroquinolones and tetracyclines

A novel carbon dot (CD) was synthesized through the facile and simple hydrothermal method from Curcuma amada, as the precursor for the first time. These CDs with an average diameter of 4.6 nm display blue fluorescence, with excitation/emission maxima at 360/445 nm and a quantum yield of 14.1%. It exhibited high stability under different conditions and was characterized using various techniques. These CDs can be employed as a dual-sensing platform to detect tetracyclines and fluoroquinolones, two antibiotic classes. Even though antibiotics are regarded as an inevitable commodity, overuse and improper management of discarded antibiotics pose a severe threat to the environment. Herein, we developed a dual-sensing, biocompatible sensor with high selectivity and sensitivity to detect antibiotics. CD was employed as a fluorescence probe and detected tetracycline and fluoroquinolone antibiotic through inner filter effect-based fluorescence quenching and hydrogen bonding-based enhancement process, respectively. The linear range was 0-16 μM and the detection limit was 33 nM for tetracycline and 2 nM for fluoroquinolone antibiotic. As an electrochemical probe, CD selectively detected tetracycline with a lower detection limit of 0.5 nM over a linear range of 0-16 μM. Using both methods, a real sample analysis of the developed sensor exhibited accurate reliability and precision.

Maize starch derived boron doped carbon spheres via facile solvothermal route as the photoluminescence sensor for determination of pH and Cr(VI)

In this work, a kind of boron doped carbon spheres (B-CSs) was successfully synthesized utilizing maize starch as carbon source and boric acid as dopant via facile solvothermal method. The chemical structure of the prepared B-CSs was systemically investigated by TEM, FT-IR, XRD, XPS and EDS. The synthesized B-CSs feature spherical structure with average size of ∼254 nm and exhibit strong photoluminescence (PL) with maximum emission at a wavelength of ∼453 nm under irradiation at 350 nm, leading to a quantum yield of 6.2%. Furthermore, the aqueous pH and Cr(VI) has a significantly various impact on the PL intensity of B-CSs, which can be flexibly utilized as the PL sensor for detection aqueous pH and Cr(VI) in aqueous. Particularly, the B-CSs have a desirable sensitivity and selectivity for detection of Cr(VI) with a low detection limit of ∼0.34μmol l^-1. Conclusively, our work provides a novel and dual-functional fluorescent sensor for detection of the pH and toxic metal ions in water environment.

Cadmium induced aggregation of orange-red emissive carbon dots with enhanced fluorescence for intracellular imaging

Cadmium is a notorious toxic heavy metal, that poses serious threat to human health. Sensitive and selective detection of cadmium in cells is of great significance in poison screening and disease diagnosis. Orange-red emissive carbon dots (OR-CDs), prepared from the calcination of selected carbon sources 5-amino-1, 10-phenanthroline (Aphen) and salicylic acid (SA), were found to act as a "turn on" type fluorescence probe for Cd²⁺ detection. The structure and optical properties of OR-CDs were comprehensively investigated by both experimental characterizations and density functional theory (DFT) calculations. The OR-CDs consist of a basic unit of nine aromatic rings, and the N/O binding sites on the OR-CDs can specifically bind with Cd²⁺, leading to aggregation induced enhanced emission (AIEE). A detection limit of 0.30 μM was achieved for Cd²⁺ with a linear range of 0.80-100 μM. OR-CDs can not only be used for intracellular Cd²⁺ imaging but also have the potential to alleviate cadmium poison in living organisms.

Tuning the photoluminescence by engineering surface states/size of S, N co-doped carbon dots for cellular imaging applications

In this research, we have synthesized carbon dots (CDs) co-doped with nitrogen and sulfur by facile hydrothermal method, using citric acid and cysteine as carbon source. The effect of solid-state thermic treatment (STT) at 303-453 K on the size, surface, fluorescence and cellular cytotoxicity of the CDs were systematically investigated. Through a simple STT, it was possible to tune surface states and the average size of the CDs, causing a permanent red shift. Initially, CDs showed a decrease in cell viability with increasing concentration. However, after STT, its viability remained constant with an increase in concentration. Here, we show the possibility to label the cells cytoplasm according to the CDs fluorescence emission before (blue emission) and after STT (red emission). The CDs studied in this paper show selective luminescence properties, which are fundamental for any cell imaging application.

Synthesis Mechanisms, Structural Models, and Photothermal Therapy Applications of Top-Down Carbon Dots from Carbon Powder, Graphite, Graphene, and Carbon Nanotubes

In this study, top-down syntheses of carbon dots (CDs) from four different carbon precursors, namely, carbon nano powders, graphite, graphene, and carbon nanotubes, were carried out. Systematic study demonstrated that the optical properties and surface functionalities of the CDs were quite similar and mainly influenced by the synthesis method, while the sizes, morphologies, chemical compositions, and core structures of the CDs were heavily influenced by the carbon precursors. On the basis of these studies, the formation processes and structural models of these four top-down CDs were proposed. The cell cytotoxicity and photothermal conversion efficiency of these CDs were also carefully evaluated, demonstrating their potential applications in photothermal therapy.

Tinospora cordifolia Leaves Derived Carbon dots for Cancer Cell Bioimaging, Free radical Scavenging, and Fe3+ Sensing Applications

Herein, we report the fabrication of Tinospora cordifolia leaves-derived carbon dots (TCLCDs) from aqueous extract of leaves as carbon source via simple, environmentally friendly, hydrothermal carbonization (HTC) technique. The synthesized TCLCDs were characterized for their physicochemical properties and further explored for in-vitro cancer cell bioimaging, radical scavenging, and metal ion sensing. The synthesized TCLCDs showed excitation-dependent emission property with maximum emission at 435 nm under the excitation of 350 nm. The High-Resolution Transmission Electron Microscopy (HRTEM) results revealed a roughly spherical shape with an average diameter of 5.47 nm. The diffused ring pattern of Selected Area Electron Diffraction (SAED) and halo diffraction pattern of X-ray diffraction (XRD) disclosed their amorphous nature. The Energy Dispersive X-ray (EDX) showed the existence of C, N, and O. The Fourier-transform infrared spectroscopy (FTIR) revealed the presence of -OH, -NH, -CN, and -CH groups. The TCLCDs showed excellent cellular biocompatibility with dose-dependent bioimaging results in melanoma (B16F10) and cervical cancer (SiHa) cell lines. Also, they exhibited excellent scavenging of free radicals with an IC₅₀ value of 0.524 mg/mL & selective Fe³⁺ ion sensing with a detection limit of 0.414 µM. Further, they exerted excellent bacterial biocompatibility, photostability, and thermal stability. The overall results reflected their potential for in-vitro cancer cell bioimaging, free radical scavenging, and selective Fe³⁺ ion sensing.

Preparation of ICA-loaded mPEG-ICA nanoparticles and their application in the treatment of LPS-induced H9c2 cell damage

Hydrophilic polyethylene glycol monomethyl ether (mPEG) was grafted onto Icariin (ICA) by succinic anhydride to form a polyethylene glycol-Icariin (mPEG-ICA) polymer. The structure of the polymer was characterized by Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance spectroscopy (NMR). mPEG-ICA nanoparticles loaded with ICA were prepared by physical embedding of ICA by dialysis. The particle size was determined to be (220 ± 13.7) nm, and the ζ potential was (2.30 ± 1.33) mV by dynamic light scattering (DLS). Under a transmission electron microscope (TEM), the nanoparticles were spherical, and the morphology was regular. In the medium with pH 7.4, the drug release rate of mPEG-ICA nanoparticles reached (52.80 ± 1.70)% within 72 h. At pH 6.8, the cumulative drug release of nanoparticles reached (75.66 ± 0.17)% within 48 h. Treatment of the nanoparticles with LPS-treated H9c2 cells maintained cell viability, reduced LDH release and exerted antiapoptotic effects. Moreover, ICA-loaded mPEG-ICA nanoparticles significantly decreased the mRNA expression of the myocardial inflammatory cytokines TNF-α, IL-1β and IL-6M. In conclusion, ICA-loaded mPEG-ICA nanoparticles protected against LPS-induced H9c2 cell injury.

Carbon dots from an immunomodulatory plant for cancer cell imaging, free radical scavenging and metal sensing applications

Aim: This work aimed to develop Tinospora cordifolia stem-derived carbon dots (TCSCD) for cancer cell imaging, free radical scavenging and metal sensing applications. Method: The TCSCDs were synthesized by a simple, one-step, and ecofriendly hydrothermal carbonization method and characterized for their optical properties, morphology, hydrodynamic size, surface functionality, crystallinity, stability, bacterial biocompatibility, in vitro cellular imaging, free radical scavenging and metal sensing ability. Results: The TCSCDs exhibited excellent biocompatibility with dose-dependent bioimaging results in melanoma (B16F10) and cervical cancer (SiHa) cell lines. They exerted good free radical scavenging, Fe³⁺ sensing, bacterial biocompatibility, photostability, colloidal dispersion stability and thermal stability. Conclusion: The results reflect the potential of TCSCDs for biomedical and pharmaceutical applications.

Carbon dots for cancer nanomedicine: a bright future

Cancer remains one of the main causes of death in the world. Early diagnosis and effective cancer therapies are required to treat this pathology. Traditional therapeutic approaches are limited by lack of specificity and systemic toxicity. In this scenario, nanomaterials could overcome many limitations of conventional approaches by reducing side effects, increasing tumor accumulation and improving the efficacy of drugs. In the past few decades, carbon nanomaterials (i.e., fullerenes, carbon nanotubes, and carbon dots) have attracted significant attention of researchers in various scientific fields including biomedicine due to their unique physical/chemical properties and biological compatibility and are among the most promising materials that have already changed and will keep changing human life. Recently, because of their functionalization and stability, carbon nanomaterials have been explored as a novel tool for the delivery of therapeutic cancer drugs. In this review, we present an overview of the development of carbon dot nanomaterials in the nanomedicine field by focusing on their synthesis, and structural and optical properties as well as their imaging, therapy and cargo delivery applications.

Fluorescent Carbon Dots as Biosensor, Green Reductant, and Biomarker

Carbon dots, the celebrated green material among the nanocarbon family, are blessed with several interesting features like biocompatibility, solubility, tunable luminescence, and so forth. Herein, carbon dots derived from Mint leaf extract (M-CDs) via a green method are exploited for versatile applications as a biosensor, reductant, and biomarker. M-CDs are applied for fluorimetric sensing of biologically relevant folic acid through quenching response originating from the inner filter effect, with a limit of detection of 280 nM. The carbon dots were highly selective toward folic acid in a collection of 16 biomolecules. The specificity of carbon dots toward folic acid is explained based on the interaction between the two. Along with sensing, herein, we project M-CDs as a green reducing agent by demonstrating the reduction of Fe(III) and noble metal nanoparticle synthesis from their salt solutions. The particles are found to be significantly non-cytotoxic, as evident from the MTT assay performed on primary H8 cells. The application of M-CDs in multicolor imaging is also illustrated using HeLa cells.

Electrochemiluminescence of water-dispersed nitrogen and sulfur doped carbon dots synthesized from amino acids

A facile one-pot hydrothermal approach for synthesizing water-dispersed nitrogen and sulfur doped carbon dots (NS-CDs) with high luminescence quantum yield was explored, using cysteine and tryptophan as precursors. The NS-CDs were characterized by means of FT-IR spectroscopy, XRD, TEM, etc. It was found that the absolute photoluminescence quantum yield (QY) of the NS-CDs determined with an integrating sphere can reach up to 73%, with an average decay time of 17.06 ns. Electrochemiluminescence (ECL) behaviors and mechanisms of the NS-CDs/K₂S₂O₈ coreactant system were investigated. When the working electrode was modified with the prepared NS-CDs, the ECL efficiency of the NS-CDs with K₂S₂O₈ was 24%, relative to Ru(bpy)₃Cl₂/K₂S₂O₈. This work shows great potential for the NS-CDs to be used in bioanalytical applications.

Boron, and nitrogen co-doped carbon dots as a multiplexing probe for sensing of p-nitrophenol, Fe (III), and temperature

Boron and nitrogen co-doped carbon dots (B, N-CDs) were fabricated through a simple, one-step hydrothermal reaction of citric acid, boric acid, and tris base. The obtained B, N-CDs exhibit excitation-dependent fluorescence, high quantum yield (QY), biocompatibility, photostability, and aqueous solubility. The QY was substantially increased to 57% by doping boron atoms. Furthermore, the fluorescence intensity of B, N-CDs was temperature-dependent and decreased linearly from 283 to 333 K. The prepared B, N-CDs were used as a fluorescence probe for the detection ofpara-nitrophenol (p-NP) and Fe (III) ions with low detection limits of 0.17μM and 0.30μM, respectively. Moreover, the presence of p-NP could be further confirmed by a colorimetric assay. The fluorescent probe has been applied to determine p-NP and Fe (III) in a spiked serum sample and spiked water samples (lake and tap water). Moreover, the as-prepared B, N-CDs were of low toxicity and capable of bioimaging.

Applications of natural product-derived carbon dots in cancer biology

Natural products have contributed conspicuously to the development of innovative nanomedicines. Hence, the interface between nanomaterial science and plant natural products may bestow comprehensive diagnostic and therapeutic strategies for tackling diseases such as cancer and neurological disorders. Natural product-derived carbon dots (NPdCDs) have revealed noteworthy attributes in the fields of cancer theranostics, microbial imaging, drug sensing and drug delivery. As plants consist of a cocktail of bioactive phytomolecules, the NPdCDs can be anticipated to have medicinal properties, biocompatibility, photo-stability and easy functionalization. NPdCDs have wide-ranging applications. The primary objective of this review is to comment on recent developments in the use of NPdCDs, with special reference to their application in cancer biology. The future of the use of NPdCDs has also been considered.

Green Synthesis of Multifunctional Carbon Dots with Antibacterial Activities

Carbon dots (CDs) were obtained from medicinal turmeric leaves (Curcuma longa) by a facile one-step hydrothermal method and evaluated for their bactericidal activities against two gram-negative; Escherichia coli, Klebsiella pneumoniae, and two gram-positive counterparts; Staphylococcus aureus, S. epidermidis. The CDs exhibited spherical shapes with a mean size of 2.6 nm. The fluorescence spectra of CDs revealed intense fluorescence at λex/em = 362/429 nm with a bright blue color in an aqueous solution. The CDs showed strong photostability under various environmental conditions (pH, salt, and UV-radiation). The complete bactericidal potency of CDs was 0.25 mg/mL for E.coli and S. aureus after 8 h of exposure, while for K. pneumoniae, and S. epidermidis, the CDs at 0.5 mg/mL good antibacterial effect within 8 h and complete eradication after 24 h of exposure is observed. The release of reactive oxygen species played a crucial role in the death of the bacterial cell. The present study provides a strategy for the preparation of CDs from a medicinal plant and their potential antibacterial activities against four common contagious pathogens.

Controllable Synthesis of Biocompatible Fluorescent Carbon Dots From Cellulose Hydrogel for the Specific Detection of Hg2

Heavy metal ions overload can seriously harm human health. Simple and effective strategies for the specific detection of heavy metal ions are of great important. In this work, using different pretreatment methods, a series of carbon dots (CDs) with different particle sizes and doped with varying amounts of elements (O, N, S) were prepared based on the natural polymer, cellulose hydrogel. The CDs exhibit excellent fluorescence and biocompatibility. When the particle size decreased from 8.72 to 2.11 nm, the fluorescence quantum yield increased from 0.029 to 0.183. In addition, doping with elements (N) also effectively enhanced the fluorescent performance of the CDs. The fluorescence of the CDs, especially for the smallest, CD-4a, was significantly quenched in the presence of the heavy metal ion, Hg2+. Thus, CD-4a may be used as a fluorescence sensor for the detection of Hg2+. The fluorescence intensity of CD-4a exhibited a two-stage, concentration-dependent fluorescence response in the range 0.2-10 and 10-100 μmol/L Hg2+, with each stage having different slopes; the detection limit was 0.2 μM. More importantly, even in the presence of interfering metal ions, the detection of Hg2+ using the CDs-4a remained stable. Therefore, these biocompatible CDs may serve as a promising candidate for the specific detection of Hg2+.

Cochineal quinone carbon dot synthesis via a keto–enol tautomerism strategy and their intermolecular photo-induced cross-redox interactions with tetracycline

Specific molecular recognition of tetracycline by carminic acid-formed carbon dots taking advantage of the common quinone molecular structural unit.