Anion exchange nanofiber materials activated by daylight with a dual antibacterial effect

Light-induced antifungal activity of nanoparticles with an encapsulated porphyrin photosensitizer

The strong antifungal effect of sulfonated polystyrene nanoparticles (NPs) with an encapsulated tetraphenylporphyrin (TPP) photosensitizer is reported here. TPP is activated by visible light, resulting in the generation of singlet oxygen. Its antifungal action is potentiated in the presence of potassium iodide, yielding I₂/I₃⁻, another antifungal species. The NPs exhibit no dark toxicity, but a broad spectrum of antifungal photodynamic effects. The efficiency of this rapid killing (on the order of minutes) depends on the concentration of TPP NPs, potassium iodide, yeast species and temperature. A strong antifungal activity of TPP NPs is demonstrated on eleven pathogenic and opportunistic pathogenic yeast species (six Candida species and other yeast species, including melanized Hortaea werneckii). The composition and architecture of yeast cell envelope structures clearly influence the efficacy of photodynamic therapy. Candida krusei is the most sensitive to photodynamic therapy. Despite expectations, melanin does not provide Hortaea cells with marked resistance compared to white yeast species. The kinetics of the interaction of NPs with yeast cells is also described. This study may inspire and promote the fabrication of a new type of antiseptic for various skin injuries in clinical medicine.

Potentiation Effect of Iodine Species on the Antimicrobial Capability of Surfaces Coated with Electroactive Phthalocyanines

The spreading of different infections can occur through direct contact with glass surfaces in commonly used areas. Incorporating the use of alternative therapies in these materials seems essential to reduce and also avoid bacterial resistance. In this work, the capability to kill microbes of glass surfaces coated with two electroactive metalated phthalocyanines (ZnPc-EDOT and CuPc-EDOT) is assessed. The results show that both of these materials are capable of producing reactive oxygen species; however, the polymer with Zn(II) (ZnPc-PEDOT) has a singlet oxygen quantum yield 8-fold higher than that of the Cu(II) containing analogue. This was reflected in the in vitro experiments where the effectiveness of the surfaces was tested in bacterial suspensions, monitoring single microbe inactivation upon attachment to the polymers, and eliminating mature biofilms. Furthermore, we evaluated the use of an inorganic salt (KI) to potentiate the photodynamic inactivation mediated by an electropolymerized surface. The addition of the salt improved the efficiency of phototherapy at least two times for both polymers; nevertheless, the material coated with ZnPc-PEDOT was the only one capable of eliminating >99.98% of the initial microbes loading under different circumstances.

De Novo Ion-Exchange Membranes Based on Nanofibers

The unique functions of nanofibers (NFs) are based on their nanoscale cross-section, high specific surface area, and high molecular orientation, and/or their confined polymer chains inside the fibers. The introduction of ion-exchange (IEX) groups on the surface and/or inside the NFs provides de novo ion-exchangers. In particular, the combination of large surface areas and ionizable groups in the IEX-NFs improves their performance through indices such as extremely rapid ion-exchange kinetics and high ion-exchange capacities. In reality, the membranes based on ion-exchange NFs exhibit superior properties such as high catalytic efficiency, high ion-exchange and adsorption capacities, and high ionic conductivities. The present review highlights the fundamental aspects of IEX-NFs (i.e., their unique size-dependent properties), scalable production methods, and the recent advancements in their applications in catalysis, separation/adsorption processes, and fuel cells, as well as the future perspectives and endeavors of NF-based IEMs.

Photodynamic Inactivation of Pseudomonas aeruginosa by PHEMA Films Loaded with Rose Bengal: Potentiation Effect of Potassium Iodide

Four formulations have been used to produce different poly(2-hydroxyethyl methacrylate) (PHEMA) thin films, containing singlet oxygen photosensitizer Rose Bengal (RB). The polymers have been characterized employing Thermogravimetric Analysis (TGA), Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and UV-vis Absorption Spectroscopy. When irradiated with white light (400-700 nm) films generated singlet oxygen (1O2), as demonstrated by the reactivity with 1O2 trap 9,10-dimethylanthracene (DMA). Material with the highest RB loading (polymer A4, 835 nmol RB/g polymer) was able to perform up to ten cycles of DMA oxygenation reactions at high conversion rates (ca. 90%). Polymer A4 was also able to produce the complete eradication of a Pseudomonas aeruginosa planktonic suspension of 8 log10 CFU/mL, when irradiated with white light (total dose 72 J/cm2). The antimicrobial photodynamic effect was remarkably enhanced by adding potassium iodide (100 mM). In such conditions the complete bacterial reduction occurred with a total light dose of 24 J/cm2. Triiodide anion (I3-) generation was confirmed by UV-vis absorption spectroscopy. This species was detected inside the PHEMA films after irradiation and at concentrations ca. 1 M. The generation of this species and its retention in the matrix imparts long-lasting bactericidal effects to the RB@PHEMA polymeric hydrogels. The polymers here described could find potential applications in the medical context, when optimized for their use in everyday objects, helping to prevent bacterial contagion by contact with surfaces.

Broad-Spectrum Photo-Antimicrobial Polymers Based on Cationic Polystyrene and Rose Bengal

New strategies to fight bacteria and fungi are necessary in view of the problem of iatrogenic and nosocomial infections combined with the growing threat of increased antimicrobial resistance. Recently, our group has prepared and described two new readily available materials based on the combination of Rose Bengal (singlet oxygen photosensitizer) and commercially available cationic polystyrene (macroporous resin Amberlite® IRA 900 or gel-type resin IRA 400). These materials showed high efficacy in the antimicrobial photodynamic inactivation (aPDI) of Pseudomonas aeruginosa. Here, we present the photobactericidal effect of these polymers against an extended group of pathogens like Escherichia coli, Enterococcus faecalis, Staphylococcus aureus, and the opportunistic yeast Candida albicans using green light. The most interesting finding is that the studied materials are able to reduce the population of both Gram-positive and Gram-negative bacteria with good activity, although, for C. albicans, in a moderate manner. In view of the results achieved and especially considering the inexpensiveness of these two types of photoactive polymers, we believe that they could be used as the starting point for the development of coatings for self-disinfecting surfaces.

The effect of iodide and temperature on enhancing antibacterial properties of nanoparticles with an encapsulated photosensitizer

Aqueous dispersions of sulfonated polystyrene nanoparticles (average diameter: 30 ± 14 nm) with encapsulated 5,10,15,20-tetraphenylporphyrin (TPP) are promising candidates for antibacterial treatments due to the photogeneration of cytotoxic singlet oxygen species O₂(¹Δ_g) under physiological conditions using visible light. The antibacterial effect on gram-negative Escherichia coli was significantly enhanced after the addition of nontoxic potassium iodide (0.001-0.01 M) because photogenerated O₂(¹Δ_g) oxidized iodide to I₂/I₃^-, which is another antibacterial species. The improved antibacterial properties were predicted using luminescence measurements of O₂(¹Δ_g), transient absorption of TPP triplets and singlet oxygen-sensitized delayed fluorescence (SODF). In contrast to a solution of free photosensitizers, the aqueous dispersion of photoactive nanoparticles did not exhibit any quenching of the excited states after the addition of iodide or any tendency toward aggregation and/or I₃^--induced photo-aggregation. We also observed a decrease in the lifetime of O₂(¹Δ_g) and a significant increase in SODF intensity at higher temperatures, due to the increased oxygen diffusion coefficient in nanoparticles and aqueous surroundings. This effect corresponds with the significantly stronger antibacterial effect of nanoparticles at physiological temperature (37 °C) in comparison with that at room temperature (25 °C).

Visible light active nanofibrous membrane for antibacterial wound dressing

Chronic wound infections, especially due to the emergence of multidrug resistance in bacteria, require the urgent development of alternative antibacterial therapies. Here, we developed a new class of hydrogel nanofibrous membranes that show visible light-induced disinfection. The presented photocatalytic disinfection is based on the generation of reactive singlet oxygen from a conjugated microporous polymer upon visible light irradiation. Therefore, sustained protection of the wound area can be provided in the presence of visible light. Fabrication of the photoactive wound dressing consists of first synthesizing photoactive conjugated microporous polymer nanoparticles by miniemulsion polymerization and subsequently embedding the nanoparticles in polyvinyl alcohol hydrogel nanofibers by colloid-electrospinning. The fibers were then crosslinked in glutaraldehyde/HCl vapor to be water-insoluble. This nanoparticle-in-nanofiber structure allows for a flexible combination of the properties of the nanoparticles and supporting nanofibers. The disinfecting properties of the membranes were evaluated with the inactivation of Escherichia coli K-12 and Bacillus subtilis as model systems of Gram-negative and Gram-positive bacteria, as well as the inhibition of biofilm growth under irradiation of visible light. Cytotoxicity tests on fibroblast cells revealed a high cytocompatibility of the membranes. Furthermore, the good mechanical properties of the membranes allow for their facile removal after use and prevent the leakage of the embedded nanoparticles into the wound, making the photoactive hydrogel membranes a promising candidate for active wound dressing materials.

Antibacterial nitric oxide- and singlet oxygen-releasing polystyrene nanoparticles responsive to light and temperature triggers

Novel therapies to prevent bacterial infections are of utmost importance in biomedical research due to the emergence of multidrug-resistant strains of bacteria. Herein, we report the preparation, characterization and antibacterial evaluation of sulfonated polystyrene nanoparticles simultaneously releasing two antibacterial species, nitric oxide (NO) and singlet oxygen (O₂(¹Δ_g)), upon irradiation with visible light. The nanoparticles were prepared by simple and scalable processes from nanofiber membranes with an encapsulated NO photodonor and/or ionically entangled tetracationic porphyrin/phthalocyanine photosensitizers. The release of NO and O₂(¹Δ_g) from the polystyrene nanoparticles is controlled by light wavelength and dose, as well as by temperature, which influences the diffusion coefficient and solubility of both species in the polystyrene matrix. The concentrations of NO and O₂(¹Δ_g) were measured by amperometric and time-resolved spectroscopic techniques and by chemical analysis. Due to the efficient photogeneration of both species at physiological temperature and resultant strong antibacterial action observed on Escherichia coli, the nanoparticles are a promising material for antibacterial applications triggered/modulated by light and temperature.

Nanoparticles with Embedded Porphyrin Photosensitizers for Photooxidation Reactions and Continuous Oxygen Sensing

We report the synthesis and characterization of sulfonated polystyrene nanoparticles (average diameter 30 ± 14 nm) with encapsulated 5,10,15,20-tetraphenylporphyrin or ionically entangled tetracationic 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin, their photooxidation properties, and the application of singlet oxygen-sensitized delayed fluorescence (SODF) in oxygen sensing. Both types of nanoparticles effectively photogenerated singlet oxygen, O₂(¹Δ_g). The O₂(¹Δ_g) phosphorescence, transient absorption of the porphyrin triplet states, and SODF signals were monitored using time-resolved spectroscopic techniques. The SODF intensity depended on the concentration of the porphyrin photosensitizer and dissolved oxygen and on the temperature. After an initial period (a few microseconds), the kinetics of the SODF process can be approximated as a monoexponential function, and the apparent SODF lifetimes can be correlated with the oxygen concentration. The oxygen sensing based on SODF allowed measurement of the dissolved oxygen in aqueous media in the broad range of oxygen concentrations (0.2-38 mg L^-1). The ability of both types of nanoparticles to photooxidize external substrates was predicted by the SODF measurements and proven by chemical tests. The relative photooxidation efficacy was highest at a low porphyrin concentration, as indicated by the highest fluorescence quantum yield (Φ_F), and it corresponds with negligible inner filter and self-quenching effects. The photooxidation abilities were sensitive to the influence of temperature on the diffusion and solubility of oxygen in both polystyrene and water media and to the rate constant of the O₂(¹Δ_g) reaction with a substrate. Due to their efficient photogeneration of cytotoxic O₂(¹Δ_g) at physiological temperatures and their oxygen sensing via SODF, both types of nanoparticles are promising candidates for biomedical applications.

Antibacterial, Antiviral, and Oxygen-Sensing Nanoparticles Prepared from Electrospun Materials

A simple nanoprecipitation method was used for preparation of stable photoactive polystyrene nanoparticles (NPs, diameter 30 ± 10 nm) from sulfonated electrospun polystyrene nanofiber membranes with encapsulated 5,10,15,20-tetraphenylporphyrin (TPP) or platinum octaethylporphyrin (Pt-OEP). The NPs prepared with TPP have strong antibacterial and antiviral properties and can be applied to the photooxidation of external substrates based on photogenerated singlet oxygen. In contrast to nanofiber membranes, which have limited photooxidation ability near the surface, NPs are able to travel toward target species/structures. NPs with Pt-OEP were used for oxygen sensing in aqueous media, and they presented strong linear responses to a broad range of oxygen concentrations. The nanofiber membranes can be applied not only as a source of NPs but also as an effective filter for their removal from solution.

Wool Keratin 3D Scaffolds with Light-Triggered Antimicrobial Activity

Photoactivatable keratin sponges were prepared from protein aqueous solutions by the freeze-drying method, followed by photofunctionalization with two different photosensitizers (PS): Azure A (AzA) and 5,10,15,20-tetrakis [4-(2-N,N,N-trimethylethylthio)-2,3,5,6-tetrafluorophenyl]porphyrin tetraiodide salt (TTFAP). The prepared sponges have a porosity between 49% and 80% and a mean pore size in the 37-80 μm range. As compared to AzA, TTFAP interacts more strongly with the sponges as demonstrated by a lower PS release (6% vs 20%), a decreased swelling ratio (1.6 vs 7.4), and a slower biodegradation rate. Nevertheless, AzA-loaded sponges showed the highest photoactivity, as also demonstrated by their higher antibactericidal activity toward both Gram-positive and Gram-negative bacteria. The obtained results suggest that the antimicrobial photodynamic effect can be finely triggered through a proper selection of the amount and type of photosensitizer, as well as through the irradiation time. Finally, all the prepared sponges support human fibroblast cells growth, while no significant cell viability impairment is observed upon light irradiation.

A Perspective on the Trends and Challenges Facing Porphyrin-Based Anti-Microbial Materials

The emergence of multidrug resistant bacterium threatens to unravel global healthcare systems, built up over centuries of medical research and development. Current antibiotics have little resistance against this onslaught as bacterium strains can quickly evolve effective defense mechanisms. Fortunately, alternative therapies exist and, at the forefront of research lays the photodynamic inhibition approach mediated by porphyrin based photosensitizers. This review will focus on the development of various porphyrins compounds and their incorporation as small molecules, into polymers, fibers and thin films as practical therapeutic agents, utilizing photodynamic therapy to inhibit a wide spectrum of bacterium. The use of photodynamic therapy of these porphyrin molecules are discussed and evaluated according to their electronic and bulk material effect on different bacterium strains. This review also provides an insight into the general direction and challenges facing porphyrins and derivatives as full-fledged therapeutic agents and what needs to be further done in order to be bestowed their rightful and equal status in modern medicine, similar to the very first antibiotic; penicillin itself. It is hoped that, with this perspective, new paradigms and strategies in the application of porphyrins and derivatives will progressively flourish and lead to advances against disease.

Materials for selective photo-oxygenation vs. photocatalysis: preparation, properties and applications in environmental and health fields

Photosensitizing materials made of organic dyes embedded in various supports are compared to usual supported TiO₂-based photocatalysts.

Polystyrene Nanofiber Materials for Visible-Light-Driven Dual Antibacterial Action via Simultaneous Photogeneration of NO and O2((1)Δg)

This contribution reports on the preparation, characterization, and biological evaluation of electrospun polystyrene nanofiber materials engineered with a covalently grafted NO photodonor and ionically entangled tetracationic porphyrin and phthalocyanine photosensitizers. These photofunctional materials exhibit an effective and simultaneous photogeneration of two antibacterial species such as nitric oxide (NO) and singlet oxygen, O2((1)Δg) under illumination with visible light, as demonstrated by their direct detection using amperometric and time-resolved spectroscopic techniques. Dual-mode photoantibacterial action is demonstrated by antibacterial tests carried out on Escherichia coli.